2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/module.h>
28 #include <linux/input.h>
29 #include <linux/i2c.h>
30 #include <linux/kernel.h>
32 #include "intel_drv.h"
37 #include "drm_crtc_helper.h"
39 #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
41 bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
42 static void intel_update_watermarks(struct drm_device *dev);
43 static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule);
66 #define INTEL_P2_NUM 2
67 typedef struct intel_limit intel_limit_t;
69 intel_range_t dot, vco, n, m, m1, m2, p, p1;
71 bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
72 int, int, intel_clock_t *);
73 bool (* find_reduced_pll)(const intel_limit_t *, struct drm_crtc *,
74 int, int, intel_clock_t *);
77 #define I8XX_DOT_MIN 25000
78 #define I8XX_DOT_MAX 350000
79 #define I8XX_VCO_MIN 930000
80 #define I8XX_VCO_MAX 1400000
84 #define I8XX_M_MAX 140
85 #define I8XX_M1_MIN 18
86 #define I8XX_M1_MAX 26
88 #define I8XX_M2_MAX 16
90 #define I8XX_P_MAX 128
92 #define I8XX_P1_MAX 33
93 #define I8XX_P1_LVDS_MIN 1
94 #define I8XX_P1_LVDS_MAX 6
95 #define I8XX_P2_SLOW 4
96 #define I8XX_P2_FAST 2
97 #define I8XX_P2_LVDS_SLOW 14
98 #define I8XX_P2_LVDS_FAST 7
99 #define I8XX_P2_SLOW_LIMIT 165000
101 #define I9XX_DOT_MIN 20000
102 #define I9XX_DOT_MAX 400000
103 #define I9XX_VCO_MIN 1400000
104 #define I9XX_VCO_MAX 2800000
105 #define IGD_VCO_MIN 1700000
106 #define IGD_VCO_MAX 3500000
109 /* IGD's Ncounter is a ring counter */
112 #define I9XX_M_MIN 70
113 #define I9XX_M_MAX 120
115 #define IGD_M_MAX 256
116 #define I9XX_M1_MIN 10
117 #define I9XX_M1_MAX 22
118 #define I9XX_M2_MIN 5
119 #define I9XX_M2_MAX 9
120 /* IGD M1 is reserved, and must be 0 */
124 #define IGD_M2_MAX 254
125 #define I9XX_P_SDVO_DAC_MIN 5
126 #define I9XX_P_SDVO_DAC_MAX 80
127 #define I9XX_P_LVDS_MIN 7
128 #define I9XX_P_LVDS_MAX 98
129 #define IGD_P_LVDS_MIN 7
130 #define IGD_P_LVDS_MAX 112
131 #define I9XX_P1_MIN 1
132 #define I9XX_P1_MAX 8
133 #define I9XX_P2_SDVO_DAC_SLOW 10
134 #define I9XX_P2_SDVO_DAC_FAST 5
135 #define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000
136 #define I9XX_P2_LVDS_SLOW 14
137 #define I9XX_P2_LVDS_FAST 7
138 #define I9XX_P2_LVDS_SLOW_LIMIT 112000
140 /*The parameter is for SDVO on G4x platform*/
141 #define G4X_DOT_SDVO_MIN 25000
142 #define G4X_DOT_SDVO_MAX 270000
143 #define G4X_VCO_MIN 1750000
144 #define G4X_VCO_MAX 3500000
145 #define G4X_N_SDVO_MIN 1
146 #define G4X_N_SDVO_MAX 4
147 #define G4X_M_SDVO_MIN 104
148 #define G4X_M_SDVO_MAX 138
149 #define G4X_M1_SDVO_MIN 17
150 #define G4X_M1_SDVO_MAX 23
151 #define G4X_M2_SDVO_MIN 5
152 #define G4X_M2_SDVO_MAX 11
153 #define G4X_P_SDVO_MIN 10
154 #define G4X_P_SDVO_MAX 30
155 #define G4X_P1_SDVO_MIN 1
156 #define G4X_P1_SDVO_MAX 3
157 #define G4X_P2_SDVO_SLOW 10
158 #define G4X_P2_SDVO_FAST 10
159 #define G4X_P2_SDVO_LIMIT 270000
161 /*The parameter is for HDMI_DAC on G4x platform*/
162 #define G4X_DOT_HDMI_DAC_MIN 22000
163 #define G4X_DOT_HDMI_DAC_MAX 400000
164 #define G4X_N_HDMI_DAC_MIN 1
165 #define G4X_N_HDMI_DAC_MAX 4
166 #define G4X_M_HDMI_DAC_MIN 104
167 #define G4X_M_HDMI_DAC_MAX 138
168 #define G4X_M1_HDMI_DAC_MIN 16
169 #define G4X_M1_HDMI_DAC_MAX 23
170 #define G4X_M2_HDMI_DAC_MIN 5
171 #define G4X_M2_HDMI_DAC_MAX 11
172 #define G4X_P_HDMI_DAC_MIN 5
173 #define G4X_P_HDMI_DAC_MAX 80
174 #define G4X_P1_HDMI_DAC_MIN 1
175 #define G4X_P1_HDMI_DAC_MAX 8
176 #define G4X_P2_HDMI_DAC_SLOW 10
177 #define G4X_P2_HDMI_DAC_FAST 5
178 #define G4X_P2_HDMI_DAC_LIMIT 165000
180 /*The parameter is for SINGLE_CHANNEL_LVDS on G4x platform*/
181 #define G4X_DOT_SINGLE_CHANNEL_LVDS_MIN 20000
182 #define G4X_DOT_SINGLE_CHANNEL_LVDS_MAX 115000
183 #define G4X_N_SINGLE_CHANNEL_LVDS_MIN 1
184 #define G4X_N_SINGLE_CHANNEL_LVDS_MAX 3
185 #define G4X_M_SINGLE_CHANNEL_LVDS_MIN 104
186 #define G4X_M_SINGLE_CHANNEL_LVDS_MAX 138
187 #define G4X_M1_SINGLE_CHANNEL_LVDS_MIN 17
188 #define G4X_M1_SINGLE_CHANNEL_LVDS_MAX 23
189 #define G4X_M2_SINGLE_CHANNEL_LVDS_MIN 5
190 #define G4X_M2_SINGLE_CHANNEL_LVDS_MAX 11
191 #define G4X_P_SINGLE_CHANNEL_LVDS_MIN 28
192 #define G4X_P_SINGLE_CHANNEL_LVDS_MAX 112
193 #define G4X_P1_SINGLE_CHANNEL_LVDS_MIN 2
194 #define G4X_P1_SINGLE_CHANNEL_LVDS_MAX 8
195 #define G4X_P2_SINGLE_CHANNEL_LVDS_SLOW 14
196 #define G4X_P2_SINGLE_CHANNEL_LVDS_FAST 14
197 #define G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT 0
199 /*The parameter is for DUAL_CHANNEL_LVDS on G4x platform*/
200 #define G4X_DOT_DUAL_CHANNEL_LVDS_MIN 80000
201 #define G4X_DOT_DUAL_CHANNEL_LVDS_MAX 224000
202 #define G4X_N_DUAL_CHANNEL_LVDS_MIN 1
203 #define G4X_N_DUAL_CHANNEL_LVDS_MAX 3
204 #define G4X_M_DUAL_CHANNEL_LVDS_MIN 104
205 #define G4X_M_DUAL_CHANNEL_LVDS_MAX 138
206 #define G4X_M1_DUAL_CHANNEL_LVDS_MIN 17
207 #define G4X_M1_DUAL_CHANNEL_LVDS_MAX 23
208 #define G4X_M2_DUAL_CHANNEL_LVDS_MIN 5
209 #define G4X_M2_DUAL_CHANNEL_LVDS_MAX 11
210 #define G4X_P_DUAL_CHANNEL_LVDS_MIN 14
211 #define G4X_P_DUAL_CHANNEL_LVDS_MAX 42
212 #define G4X_P1_DUAL_CHANNEL_LVDS_MIN 2
213 #define G4X_P1_DUAL_CHANNEL_LVDS_MAX 6
214 #define G4X_P2_DUAL_CHANNEL_LVDS_SLOW 7
215 #define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7
216 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0
218 /*The parameter is for DISPLAY PORT on G4x platform*/
219 #define G4X_DOT_DISPLAY_PORT_MIN 161670
220 #define G4X_DOT_DISPLAY_PORT_MAX 227000
221 #define G4X_N_DISPLAY_PORT_MIN 1
222 #define G4X_N_DISPLAY_PORT_MAX 2
223 #define G4X_M_DISPLAY_PORT_MIN 97
224 #define G4X_M_DISPLAY_PORT_MAX 108
225 #define G4X_M1_DISPLAY_PORT_MIN 0x10
226 #define G4X_M1_DISPLAY_PORT_MAX 0x12
227 #define G4X_M2_DISPLAY_PORT_MIN 0x05
228 #define G4X_M2_DISPLAY_PORT_MAX 0x06
229 #define G4X_P_DISPLAY_PORT_MIN 10
230 #define G4X_P_DISPLAY_PORT_MAX 20
231 #define G4X_P1_DISPLAY_PORT_MIN 1
232 #define G4X_P1_DISPLAY_PORT_MAX 2
233 #define G4X_P2_DISPLAY_PORT_SLOW 10
234 #define G4X_P2_DISPLAY_PORT_FAST 10
235 #define G4X_P2_DISPLAY_PORT_LIMIT 0
238 /* as we calculate clock using (register_value + 2) for
239 N/M1/M2, so here the range value for them is (actual_value-2).
241 #define IGDNG_DOT_MIN 25000
242 #define IGDNG_DOT_MAX 350000
243 #define IGDNG_VCO_MIN 1760000
244 #define IGDNG_VCO_MAX 3510000
245 #define IGDNG_N_MIN 1
246 #define IGDNG_N_MAX 5
247 #define IGDNG_M_MIN 79
248 #define IGDNG_M_MAX 118
249 #define IGDNG_M1_MIN 12
250 #define IGDNG_M1_MAX 23
251 #define IGDNG_M2_MIN 5
252 #define IGDNG_M2_MAX 9
253 #define IGDNG_P_SDVO_DAC_MIN 5
254 #define IGDNG_P_SDVO_DAC_MAX 80
255 #define IGDNG_P_LVDS_MIN 28
256 #define IGDNG_P_LVDS_MAX 112
257 #define IGDNG_P1_MIN 1
258 #define IGDNG_P1_MAX 8
259 #define IGDNG_P2_SDVO_DAC_SLOW 10
260 #define IGDNG_P2_SDVO_DAC_FAST 5
261 #define IGDNG_P2_LVDS_SLOW 14 /* single channel */
262 #define IGDNG_P2_LVDS_FAST 7 /* double channel */
263 #define IGDNG_P2_DOT_LIMIT 225000 /* 225Mhz */
266 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
267 int target, int refclk, intel_clock_t *best_clock);
269 intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
270 int target, int refclk, intel_clock_t *best_clock);
272 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
273 int target, int refclk, intel_clock_t *best_clock);
275 intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
276 int target, int refclk, intel_clock_t *best_clock);
279 intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
280 int target, int refclk, intel_clock_t *best_clock);
282 intel_find_pll_igdng_dp(const intel_limit_t *, struct drm_crtc *crtc,
283 int target, int refclk, intel_clock_t *best_clock);
285 static const intel_limit_t intel_limits_i8xx_dvo = {
286 .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
287 .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
288 .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
289 .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX },
290 .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX },
291 .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX },
292 .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX },
293 .p1 = { .min = I8XX_P1_MIN, .max = I8XX_P1_MAX },
294 .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
295 .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST },
296 .find_pll = intel_find_best_PLL,
297 .find_reduced_pll = intel_find_best_reduced_PLL,
300 static const intel_limit_t intel_limits_i8xx_lvds = {
301 .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
302 .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
303 .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
304 .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX },
305 .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX },
306 .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX },
307 .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX },
308 .p1 = { .min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX },
309 .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
310 .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST },
311 .find_pll = intel_find_best_PLL,
312 .find_reduced_pll = intel_find_best_reduced_PLL,
315 static const intel_limit_t intel_limits_i9xx_sdvo = {
316 .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
317 .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
318 .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
319 .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX },
320 .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX },
321 .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX },
322 .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX },
323 .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
324 .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
325 .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
326 .find_pll = intel_find_best_PLL,
327 .find_reduced_pll = intel_find_best_reduced_PLL,
330 static const intel_limit_t intel_limits_i9xx_lvds = {
331 .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
332 .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
333 .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
334 .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX },
335 .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX },
336 .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX },
337 .p = { .min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX },
338 .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
339 /* The single-channel range is 25-112Mhz, and dual-channel
340 * is 80-224Mhz. Prefer single channel as much as possible.
342 .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
343 .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST },
344 .find_pll = intel_find_best_PLL,
345 .find_reduced_pll = intel_find_best_reduced_PLL,
348 /* below parameter and function is for G4X Chipset Family*/
349 static const intel_limit_t intel_limits_g4x_sdvo = {
350 .dot = { .min = G4X_DOT_SDVO_MIN, .max = G4X_DOT_SDVO_MAX },
351 .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX},
352 .n = { .min = G4X_N_SDVO_MIN, .max = G4X_N_SDVO_MAX },
353 .m = { .min = G4X_M_SDVO_MIN, .max = G4X_M_SDVO_MAX },
354 .m1 = { .min = G4X_M1_SDVO_MIN, .max = G4X_M1_SDVO_MAX },
355 .m2 = { .min = G4X_M2_SDVO_MIN, .max = G4X_M2_SDVO_MAX },
356 .p = { .min = G4X_P_SDVO_MIN, .max = G4X_P_SDVO_MAX },
357 .p1 = { .min = G4X_P1_SDVO_MIN, .max = G4X_P1_SDVO_MAX},
358 .p2 = { .dot_limit = G4X_P2_SDVO_LIMIT,
359 .p2_slow = G4X_P2_SDVO_SLOW,
360 .p2_fast = G4X_P2_SDVO_FAST
362 .find_pll = intel_g4x_find_best_PLL,
363 .find_reduced_pll = intel_g4x_find_best_PLL,
366 static const intel_limit_t intel_limits_g4x_hdmi = {
367 .dot = { .min = G4X_DOT_HDMI_DAC_MIN, .max = G4X_DOT_HDMI_DAC_MAX },
368 .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX},
369 .n = { .min = G4X_N_HDMI_DAC_MIN, .max = G4X_N_HDMI_DAC_MAX },
370 .m = { .min = G4X_M_HDMI_DAC_MIN, .max = G4X_M_HDMI_DAC_MAX },
371 .m1 = { .min = G4X_M1_HDMI_DAC_MIN, .max = G4X_M1_HDMI_DAC_MAX },
372 .m2 = { .min = G4X_M2_HDMI_DAC_MIN, .max = G4X_M2_HDMI_DAC_MAX },
373 .p = { .min = G4X_P_HDMI_DAC_MIN, .max = G4X_P_HDMI_DAC_MAX },
374 .p1 = { .min = G4X_P1_HDMI_DAC_MIN, .max = G4X_P1_HDMI_DAC_MAX},
375 .p2 = { .dot_limit = G4X_P2_HDMI_DAC_LIMIT,
376 .p2_slow = G4X_P2_HDMI_DAC_SLOW,
377 .p2_fast = G4X_P2_HDMI_DAC_FAST
379 .find_pll = intel_g4x_find_best_PLL,
380 .find_reduced_pll = intel_g4x_find_best_PLL,
383 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
384 .dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN,
385 .max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX },
386 .vco = { .min = G4X_VCO_MIN,
387 .max = G4X_VCO_MAX },
388 .n = { .min = G4X_N_SINGLE_CHANNEL_LVDS_MIN,
389 .max = G4X_N_SINGLE_CHANNEL_LVDS_MAX },
390 .m = { .min = G4X_M_SINGLE_CHANNEL_LVDS_MIN,
391 .max = G4X_M_SINGLE_CHANNEL_LVDS_MAX },
392 .m1 = { .min = G4X_M1_SINGLE_CHANNEL_LVDS_MIN,
393 .max = G4X_M1_SINGLE_CHANNEL_LVDS_MAX },
394 .m2 = { .min = G4X_M2_SINGLE_CHANNEL_LVDS_MIN,
395 .max = G4X_M2_SINGLE_CHANNEL_LVDS_MAX },
396 .p = { .min = G4X_P_SINGLE_CHANNEL_LVDS_MIN,
397 .max = G4X_P_SINGLE_CHANNEL_LVDS_MAX },
398 .p1 = { .min = G4X_P1_SINGLE_CHANNEL_LVDS_MIN,
399 .max = G4X_P1_SINGLE_CHANNEL_LVDS_MAX },
400 .p2 = { .dot_limit = G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT,
401 .p2_slow = G4X_P2_SINGLE_CHANNEL_LVDS_SLOW,
402 .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
404 .find_pll = intel_g4x_find_best_PLL,
405 .find_reduced_pll = intel_g4x_find_best_PLL,
408 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
409 .dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN,
410 .max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX },
411 .vco = { .min = G4X_VCO_MIN,
412 .max = G4X_VCO_MAX },
413 .n = { .min = G4X_N_DUAL_CHANNEL_LVDS_MIN,
414 .max = G4X_N_DUAL_CHANNEL_LVDS_MAX },
415 .m = { .min = G4X_M_DUAL_CHANNEL_LVDS_MIN,
416 .max = G4X_M_DUAL_CHANNEL_LVDS_MAX },
417 .m1 = { .min = G4X_M1_DUAL_CHANNEL_LVDS_MIN,
418 .max = G4X_M1_DUAL_CHANNEL_LVDS_MAX },
419 .m2 = { .min = G4X_M2_DUAL_CHANNEL_LVDS_MIN,
420 .max = G4X_M2_DUAL_CHANNEL_LVDS_MAX },
421 .p = { .min = G4X_P_DUAL_CHANNEL_LVDS_MIN,
422 .max = G4X_P_DUAL_CHANNEL_LVDS_MAX },
423 .p1 = { .min = G4X_P1_DUAL_CHANNEL_LVDS_MIN,
424 .max = G4X_P1_DUAL_CHANNEL_LVDS_MAX },
425 .p2 = { .dot_limit = G4X_P2_DUAL_CHANNEL_LVDS_LIMIT,
426 .p2_slow = G4X_P2_DUAL_CHANNEL_LVDS_SLOW,
427 .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
429 .find_pll = intel_g4x_find_best_PLL,
430 .find_reduced_pll = intel_g4x_find_best_PLL,
433 static const intel_limit_t intel_limits_g4x_display_port = {
434 .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN,
435 .max = G4X_DOT_DISPLAY_PORT_MAX },
436 .vco = { .min = G4X_VCO_MIN,
438 .n = { .min = G4X_N_DISPLAY_PORT_MIN,
439 .max = G4X_N_DISPLAY_PORT_MAX },
440 .m = { .min = G4X_M_DISPLAY_PORT_MIN,
441 .max = G4X_M_DISPLAY_PORT_MAX },
442 .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN,
443 .max = G4X_M1_DISPLAY_PORT_MAX },
444 .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN,
445 .max = G4X_M2_DISPLAY_PORT_MAX },
446 .p = { .min = G4X_P_DISPLAY_PORT_MIN,
447 .max = G4X_P_DISPLAY_PORT_MAX },
448 .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN,
449 .max = G4X_P1_DISPLAY_PORT_MAX},
450 .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT,
451 .p2_slow = G4X_P2_DISPLAY_PORT_SLOW,
452 .p2_fast = G4X_P2_DISPLAY_PORT_FAST },
453 .find_pll = intel_find_pll_g4x_dp,
456 static const intel_limit_t intel_limits_igd_sdvo = {
457 .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX},
458 .vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX },
459 .n = { .min = IGD_N_MIN, .max = IGD_N_MAX },
460 .m = { .min = IGD_M_MIN, .max = IGD_M_MAX },
461 .m1 = { .min = IGD_M1_MIN, .max = IGD_M1_MAX },
462 .m2 = { .min = IGD_M2_MIN, .max = IGD_M2_MAX },
463 .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX },
464 .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
465 .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
466 .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
467 .find_pll = intel_find_best_PLL,
468 .find_reduced_pll = intel_find_best_reduced_PLL,
471 static const intel_limit_t intel_limits_igd_lvds = {
472 .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
473 .vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX },
474 .n = { .min = IGD_N_MIN, .max = IGD_N_MAX },
475 .m = { .min = IGD_M_MIN, .max = IGD_M_MAX },
476 .m1 = { .min = IGD_M1_MIN, .max = IGD_M1_MAX },
477 .m2 = { .min = IGD_M2_MIN, .max = IGD_M2_MAX },
478 .p = { .min = IGD_P_LVDS_MIN, .max = IGD_P_LVDS_MAX },
479 .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
480 /* IGD only supports single-channel mode. */
481 .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
482 .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW },
483 .find_pll = intel_find_best_PLL,
484 .find_reduced_pll = intel_find_best_reduced_PLL,
487 static const intel_limit_t intel_limits_igdng_sdvo = {
488 .dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX },
489 .vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX },
490 .n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX },
491 .m = { .min = IGDNG_M_MIN, .max = IGDNG_M_MAX },
492 .m1 = { .min = IGDNG_M1_MIN, .max = IGDNG_M1_MAX },
493 .m2 = { .min = IGDNG_M2_MIN, .max = IGDNG_M2_MAX },
494 .p = { .min = IGDNG_P_SDVO_DAC_MIN, .max = IGDNG_P_SDVO_DAC_MAX },
495 .p1 = { .min = IGDNG_P1_MIN, .max = IGDNG_P1_MAX },
496 .p2 = { .dot_limit = IGDNG_P2_DOT_LIMIT,
497 .p2_slow = IGDNG_P2_SDVO_DAC_SLOW,
498 .p2_fast = IGDNG_P2_SDVO_DAC_FAST },
499 .find_pll = intel_igdng_find_best_PLL,
502 static const intel_limit_t intel_limits_igdng_lvds = {
503 .dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX },
504 .vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX },
505 .n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX },
506 .m = { .min = IGDNG_M_MIN, .max = IGDNG_M_MAX },
507 .m1 = { .min = IGDNG_M1_MIN, .max = IGDNG_M1_MAX },
508 .m2 = { .min = IGDNG_M2_MIN, .max = IGDNG_M2_MAX },
509 .p = { .min = IGDNG_P_LVDS_MIN, .max = IGDNG_P_LVDS_MAX },
510 .p1 = { .min = IGDNG_P1_MIN, .max = IGDNG_P1_MAX },
511 .p2 = { .dot_limit = IGDNG_P2_DOT_LIMIT,
512 .p2_slow = IGDNG_P2_LVDS_SLOW,
513 .p2_fast = IGDNG_P2_LVDS_FAST },
514 .find_pll = intel_igdng_find_best_PLL,
517 static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc)
519 const intel_limit_t *limit;
520 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
521 limit = &intel_limits_igdng_lvds;
523 limit = &intel_limits_igdng_sdvo;
528 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
530 struct drm_device *dev = crtc->dev;
531 struct drm_i915_private *dev_priv = dev->dev_private;
532 const intel_limit_t *limit;
534 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
535 if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
537 /* LVDS with dual channel */
538 limit = &intel_limits_g4x_dual_channel_lvds;
540 /* LVDS with dual channel */
541 limit = &intel_limits_g4x_single_channel_lvds;
542 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
543 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
544 limit = &intel_limits_g4x_hdmi;
545 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
546 limit = &intel_limits_g4x_sdvo;
547 } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
548 limit = &intel_limits_g4x_display_port;
549 } else /* The option is for other outputs */
550 limit = &intel_limits_i9xx_sdvo;
555 static const intel_limit_t *intel_limit(struct drm_crtc *crtc)
557 struct drm_device *dev = crtc->dev;
558 const intel_limit_t *limit;
561 limit = intel_igdng_limit(crtc);
562 else if (IS_G4X(dev)) {
563 limit = intel_g4x_limit(crtc);
564 } else if (IS_I9XX(dev) && !IS_IGD(dev)) {
565 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
566 limit = &intel_limits_i9xx_lvds;
568 limit = &intel_limits_i9xx_sdvo;
569 } else if (IS_IGD(dev)) {
570 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
571 limit = &intel_limits_igd_lvds;
573 limit = &intel_limits_igd_sdvo;
575 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
576 limit = &intel_limits_i8xx_lvds;
578 limit = &intel_limits_i8xx_dvo;
583 /* m1 is reserved as 0 in IGD, n is a ring counter */
584 static void igd_clock(int refclk, intel_clock_t *clock)
586 clock->m = clock->m2 + 2;
587 clock->p = clock->p1 * clock->p2;
588 clock->vco = refclk * clock->m / clock->n;
589 clock->dot = clock->vco / clock->p;
592 static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
595 igd_clock(refclk, clock);
598 clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
599 clock->p = clock->p1 * clock->p2;
600 clock->vco = refclk * clock->m / (clock->n + 2);
601 clock->dot = clock->vco / clock->p;
605 * Returns whether any output on the specified pipe is of the specified type
607 bool intel_pipe_has_type (struct drm_crtc *crtc, int type)
609 struct drm_device *dev = crtc->dev;
610 struct drm_mode_config *mode_config = &dev->mode_config;
611 struct drm_connector *l_entry;
613 list_for_each_entry(l_entry, &mode_config->connector_list, head) {
614 if (l_entry->encoder &&
615 l_entry->encoder->crtc == crtc) {
616 struct intel_output *intel_output = to_intel_output(l_entry);
617 if (intel_output->type == type)
624 struct drm_connector *
625 intel_pipe_get_output (struct drm_crtc *crtc)
627 struct drm_device *dev = crtc->dev;
628 struct drm_mode_config *mode_config = &dev->mode_config;
629 struct drm_connector *l_entry, *ret = NULL;
631 list_for_each_entry(l_entry, &mode_config->connector_list, head) {
632 if (l_entry->encoder &&
633 l_entry->encoder->crtc == crtc) {
641 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
643 * Returns whether the given set of divisors are valid for a given refclk with
644 * the given connectors.
647 static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock)
649 const intel_limit_t *limit = intel_limit (crtc);
650 struct drm_device *dev = crtc->dev;
652 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
653 INTELPllInvalid ("p1 out of range\n");
654 if (clock->p < limit->p.min || limit->p.max < clock->p)
655 INTELPllInvalid ("p out of range\n");
656 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
657 INTELPllInvalid ("m2 out of range\n");
658 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
659 INTELPllInvalid ("m1 out of range\n");
660 if (clock->m1 <= clock->m2 && !IS_IGD(dev))
661 INTELPllInvalid ("m1 <= m2\n");
662 if (clock->m < limit->m.min || limit->m.max < clock->m)
663 INTELPllInvalid ("m out of range\n");
664 if (clock->n < limit->n.min || limit->n.max < clock->n)
665 INTELPllInvalid ("n out of range\n");
666 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
667 INTELPllInvalid ("vco out of range\n");
668 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
669 * connector, etc., rather than just a single range.
671 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
672 INTELPllInvalid ("dot out of range\n");
678 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
679 int target, int refclk, intel_clock_t *best_clock)
682 struct drm_device *dev = crtc->dev;
683 struct drm_i915_private *dev_priv = dev->dev_private;
687 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
688 (I915_READ(LVDS)) != 0) {
690 * For LVDS, if the panel is on, just rely on its current
691 * settings for dual-channel. We haven't figured out how to
692 * reliably set up different single/dual channel state, if we
695 if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
697 clock.p2 = limit->p2.p2_fast;
699 clock.p2 = limit->p2.p2_slow;
701 if (target < limit->p2.dot_limit)
702 clock.p2 = limit->p2.p2_slow;
704 clock.p2 = limit->p2.p2_fast;
707 memset (best_clock, 0, sizeof (*best_clock));
709 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
710 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
712 for (clock.m2 = limit->m2.min;
713 clock.m2 <= limit->m2.max; clock.m2++) {
714 /* m1 is always 0 in IGD */
715 if (clock.m2 >= clock.m1 && !IS_IGD(dev))
717 for (clock.n = limit->n.min;
718 clock.n <= limit->n.max; clock.n++) {
721 intel_clock(dev, refclk, &clock);
723 if (!intel_PLL_is_valid(crtc, &clock))
726 this_err = abs(clock.dot - target);
727 if (this_err < err) {
736 return (err != target);
741 intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
742 int target, int refclk, intel_clock_t *best_clock)
745 struct drm_device *dev = crtc->dev;
750 memcpy(&clock, best_clock, sizeof(intel_clock_t));
752 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
753 for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) {
754 /* m1 is always 0 in IGD */
755 if (clock.m2 >= clock.m1 && !IS_IGD(dev))
757 for (clock.n = limit->n.min; clock.n <= limit->n.max;
761 intel_clock(dev, refclk, &clock);
763 if (!intel_PLL_is_valid(crtc, &clock))
766 this_err = abs(clock.dot - target);
767 if (this_err < err) {
780 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
781 int target, int refclk, intel_clock_t *best_clock)
783 struct drm_device *dev = crtc->dev;
784 struct drm_i915_private *dev_priv = dev->dev_private;
788 /* approximately equals target * 0.00488 */
789 int err_most = (target >> 8) + (target >> 10);
792 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
793 if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
795 clock.p2 = limit->p2.p2_fast;
797 clock.p2 = limit->p2.p2_slow;
799 if (target < limit->p2.dot_limit)
800 clock.p2 = limit->p2.p2_slow;
802 clock.p2 = limit->p2.p2_fast;
805 memset(best_clock, 0, sizeof(*best_clock));
806 max_n = limit->n.max;
807 /* based on hardware requriment prefer smaller n to precision */
808 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
809 /* based on hardware requirment prefere larger m1,m2 */
810 for (clock.m1 = limit->m1.max;
811 clock.m1 >= limit->m1.min; clock.m1--) {
812 for (clock.m2 = limit->m2.max;
813 clock.m2 >= limit->m2.min; clock.m2--) {
814 for (clock.p1 = limit->p1.max;
815 clock.p1 >= limit->p1.min; clock.p1--) {
818 intel_clock(dev, refclk, &clock);
819 if (!intel_PLL_is_valid(crtc, &clock))
821 this_err = abs(clock.dot - target) ;
822 if (this_err < err_most) {
836 intel_find_pll_igdng_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
837 int target, int refclk, intel_clock_t *best_clock)
839 struct drm_device *dev = crtc->dev;
841 if (target < 200000) {
854 intel_clock(dev, refclk, &clock);
855 memcpy(best_clock, &clock, sizeof(intel_clock_t));
860 intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
861 int target, int refclk, intel_clock_t *best_clock)
863 struct drm_device *dev = crtc->dev;
864 struct drm_i915_private *dev_priv = dev->dev_private;
871 /* eDP has only 2 clock choice, no n/m/p setting */
875 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
876 return intel_find_pll_igdng_dp(limit, crtc, target,
879 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
880 if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
882 clock.p2 = limit->p2.p2_fast;
884 clock.p2 = limit->p2.p2_slow;
886 if (target < limit->p2.dot_limit)
887 clock.p2 = limit->p2.p2_slow;
889 clock.p2 = limit->p2.p2_fast;
892 memset(best_clock, 0, sizeof(*best_clock));
893 max_n = limit->n.max;
894 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
895 /* based on hardware requriment prefer smaller n to precision */
896 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
897 /* based on hardware requirment prefere larger m1,m2 */
898 for (clock.m1 = limit->m1.max;
899 clock.m1 >= limit->m1.min; clock.m1--) {
900 for (clock.m2 = limit->m2.max;
901 clock.m2 >= limit->m2.min; clock.m2--) {
904 intel_clock(dev, refclk, &clock);
905 if (!intel_PLL_is_valid(crtc, &clock))
907 this_err = abs((10000 - (target*10000/clock.dot)));
908 if (this_err < err_most) {
913 /* found on first matching */
924 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
926 intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
927 int target, int refclk, intel_clock_t *best_clock)
930 if (target < 200000) {
943 clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
944 clock.p = (clock.p1 * clock.p2);
945 clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
946 memcpy(best_clock, &clock, sizeof(intel_clock_t));
951 intel_wait_for_vblank(struct drm_device *dev)
953 /* Wait for 20ms, i.e. one cycle at 50hz. */
957 /* Parameters have changed, update FBC info */
958 static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
960 struct drm_device *dev = crtc->dev;
961 struct drm_i915_private *dev_priv = dev->dev_private;
962 struct drm_framebuffer *fb = crtc->fb;
963 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
964 struct drm_i915_gem_object *obj_priv = intel_fb->obj->driver_private;
965 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
967 u32 fbc_ctl, fbc_ctl2;
969 dev_priv->cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
971 if (fb->pitch < dev_priv->cfb_pitch)
972 dev_priv->cfb_pitch = fb->pitch;
974 /* FBC_CTL wants 64B units */
975 dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
976 dev_priv->cfb_fence = obj_priv->fence_reg;
977 dev_priv->cfb_plane = intel_crtc->plane;
978 plane = dev_priv->cfb_plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
981 for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
982 I915_WRITE(FBC_TAG + (i * 4), 0);
985 fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | plane;
986 if (obj_priv->tiling_mode != I915_TILING_NONE)
987 fbc_ctl2 |= FBC_CTL_CPU_FENCE;
988 I915_WRITE(FBC_CONTROL2, fbc_ctl2);
989 I915_WRITE(FBC_FENCE_OFF, crtc->y);
992 fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
993 fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
994 fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
995 if (obj_priv->tiling_mode != I915_TILING_NONE)
996 fbc_ctl |= dev_priv->cfb_fence;
997 I915_WRITE(FBC_CONTROL, fbc_ctl);
999 DRM_DEBUG("enabled FBC, pitch %ld, yoff %d, plane %d, ",
1000 dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane);
1003 void i8xx_disable_fbc(struct drm_device *dev)
1005 struct drm_i915_private *dev_priv = dev->dev_private;
1008 if (!I915_HAS_FBC(dev))
1011 /* Disable compression */
1012 fbc_ctl = I915_READ(FBC_CONTROL);
1013 fbc_ctl &= ~FBC_CTL_EN;
1014 I915_WRITE(FBC_CONTROL, fbc_ctl);
1016 /* Wait for compressing bit to clear */
1017 while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING)
1020 intel_wait_for_vblank(dev);
1022 DRM_DEBUG("disabled FBC\n");
1025 static bool i8xx_fbc_enabled(struct drm_crtc *crtc)
1027 struct drm_device *dev = crtc->dev;
1028 struct drm_i915_private *dev_priv = dev->dev_private;
1030 return I915_READ(FBC_CONTROL) & FBC_CTL_EN;
1033 static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
1035 struct drm_device *dev = crtc->dev;
1036 struct drm_i915_private *dev_priv = dev->dev_private;
1037 struct drm_framebuffer *fb = crtc->fb;
1038 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
1039 struct drm_i915_gem_object *obj_priv = intel_fb->obj->driver_private;
1040 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1041 int plane = (intel_crtc->plane == 0 ? DPFC_CTL_PLANEA :
1043 unsigned long stall_watermark = 200;
1046 dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
1047 dev_priv->cfb_fence = obj_priv->fence_reg;
1048 dev_priv->cfb_plane = intel_crtc->plane;
1050 dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
1051 if (obj_priv->tiling_mode != I915_TILING_NONE) {
1052 dpfc_ctl |= DPFC_CTL_FENCE_EN | dev_priv->cfb_fence;
1053 I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);
1055 I915_WRITE(DPFC_CHICKEN, ~DPFC_HT_MODIFY);
1058 I915_WRITE(DPFC_CONTROL, dpfc_ctl);
1059 I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
1060 (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
1061 (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
1062 I915_WRITE(DPFC_FENCE_YOFF, crtc->y);
1065 I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);
1067 DRM_DEBUG("enabled fbc on plane %d\n", intel_crtc->plane);
1070 void g4x_disable_fbc(struct drm_device *dev)
1072 struct drm_i915_private *dev_priv = dev->dev_private;
1075 /* Disable compression */
1076 dpfc_ctl = I915_READ(DPFC_CONTROL);
1077 dpfc_ctl &= ~DPFC_CTL_EN;
1078 I915_WRITE(DPFC_CONTROL, dpfc_ctl);
1079 intel_wait_for_vblank(dev);
1081 DRM_DEBUG("disabled FBC\n");
1084 static bool g4x_fbc_enabled(struct drm_crtc *crtc)
1086 struct drm_device *dev = crtc->dev;
1087 struct drm_i915_private *dev_priv = dev->dev_private;
1089 return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
1093 * intel_update_fbc - enable/disable FBC as needed
1094 * @crtc: CRTC to point the compressor at
1095 * @mode: mode in use
1097 * Set up the framebuffer compression hardware at mode set time. We
1098 * enable it if possible:
1099 * - plane A only (on pre-965)
1100 * - no pixel mulitply/line duplication
1101 * - no alpha buffer discard
1103 * - framebuffer <= 2048 in width, 1536 in height
1105 * We can't assume that any compression will take place (worst case),
1106 * so the compressed buffer has to be the same size as the uncompressed
1107 * one. It also must reside (along with the line length buffer) in
1110 * We need to enable/disable FBC on a global basis.
1112 static void intel_update_fbc(struct drm_crtc *crtc,
1113 struct drm_display_mode *mode)
1115 struct drm_device *dev = crtc->dev;
1116 struct drm_i915_private *dev_priv = dev->dev_private;
1117 struct drm_framebuffer *fb = crtc->fb;
1118 struct intel_framebuffer *intel_fb;
1119 struct drm_i915_gem_object *obj_priv;
1120 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1121 int plane = intel_crtc->plane;
1123 if (!i915_powersave)
1126 if (!dev_priv->display.fbc_enabled ||
1127 !dev_priv->display.enable_fbc ||
1128 !dev_priv->display.disable_fbc)
1134 intel_fb = to_intel_framebuffer(fb);
1135 obj_priv = intel_fb->obj->driver_private;
1138 * If FBC is already on, we just have to verify that we can
1139 * keep it that way...
1140 * Need to disable if:
1141 * - changing FBC params (stride, fence, mode)
1142 * - new fb is too large to fit in compressed buffer
1143 * - going to an unsupported config (interlace, pixel multiply, etc.)
1145 if (intel_fb->obj->size > dev_priv->cfb_size) {
1146 DRM_DEBUG("framebuffer too large, disabling compression\n");
1149 if ((mode->flags & DRM_MODE_FLAG_INTERLACE) ||
1150 (mode->flags & DRM_MODE_FLAG_DBLSCAN)) {
1151 DRM_DEBUG("mode incompatible with compression, disabling\n");
1154 if ((mode->hdisplay > 2048) ||
1155 (mode->vdisplay > 1536)) {
1156 DRM_DEBUG("mode too large for compression, disabling\n");
1159 if ((IS_I915GM(dev) || IS_I945GM(dev)) && plane != 0) {
1160 DRM_DEBUG("plane not 0, disabling compression\n");
1163 if (obj_priv->tiling_mode != I915_TILING_X) {
1164 DRM_DEBUG("framebuffer not tiled, disabling compression\n");
1168 if (dev_priv->display.fbc_enabled(crtc)) {
1169 /* We can re-enable it in this case, but need to update pitch */
1170 if (fb->pitch > dev_priv->cfb_pitch)
1171 dev_priv->display.disable_fbc(dev);
1172 if (obj_priv->fence_reg != dev_priv->cfb_fence)
1173 dev_priv->display.disable_fbc(dev);
1174 if (plane != dev_priv->cfb_plane)
1175 dev_priv->display.disable_fbc(dev);
1178 if (!dev_priv->display.fbc_enabled(crtc)) {
1179 /* Now try to turn it back on if possible */
1180 dev_priv->display.enable_fbc(crtc, 500);
1186 DRM_DEBUG("unsupported config, disabling FBC\n");
1187 /* Multiple disables should be harmless */
1188 if (dev_priv->display.fbc_enabled(crtc))
1189 dev_priv->display.disable_fbc(dev);
1193 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
1194 struct drm_framebuffer *old_fb)
1196 struct drm_device *dev = crtc->dev;
1197 struct drm_i915_private *dev_priv = dev->dev_private;
1198 struct drm_i915_master_private *master_priv;
1199 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1200 struct intel_framebuffer *intel_fb;
1201 struct drm_i915_gem_object *obj_priv;
1202 struct drm_gem_object *obj;
1203 int pipe = intel_crtc->pipe;
1204 int plane = intel_crtc->plane;
1205 unsigned long Start, Offset;
1206 int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR);
1207 int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF);
1208 int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE;
1209 int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF);
1210 int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
1211 u32 dspcntr, alignment;
1216 DRM_DEBUG("No FB bound\n");
1225 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
1229 intel_fb = to_intel_framebuffer(crtc->fb);
1230 obj = intel_fb->obj;
1231 obj_priv = obj->driver_private;
1233 switch (obj_priv->tiling_mode) {
1234 case I915_TILING_NONE:
1235 alignment = 64 * 1024;
1238 /* pin() will align the object as required by fence */
1242 /* FIXME: Is this true? */
1243 DRM_ERROR("Y tiled not allowed for scan out buffers\n");
1249 mutex_lock(&dev->struct_mutex);
1250 ret = i915_gem_object_pin(obj, alignment);
1252 mutex_unlock(&dev->struct_mutex);
1256 ret = i915_gem_object_set_to_gtt_domain(obj, 1);
1258 i915_gem_object_unpin(obj);
1259 mutex_unlock(&dev->struct_mutex);
1263 /* Pre-i965 needs to install a fence for tiled scan-out */
1264 if (!IS_I965G(dev) &&
1265 obj_priv->fence_reg == I915_FENCE_REG_NONE &&
1266 obj_priv->tiling_mode != I915_TILING_NONE) {
1267 ret = i915_gem_object_get_fence_reg(obj);
1269 i915_gem_object_unpin(obj);
1270 mutex_unlock(&dev->struct_mutex);
1275 dspcntr = I915_READ(dspcntr_reg);
1276 /* Mask out pixel format bits in case we change it */
1277 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
1278 switch (crtc->fb->bits_per_pixel) {
1280 dspcntr |= DISPPLANE_8BPP;
1283 if (crtc->fb->depth == 15)
1284 dspcntr |= DISPPLANE_15_16BPP;
1286 dspcntr |= DISPPLANE_16BPP;
1290 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
1293 DRM_ERROR("Unknown color depth\n");
1294 i915_gem_object_unpin(obj);
1295 mutex_unlock(&dev->struct_mutex);
1298 if (IS_I965G(dev)) {
1299 if (obj_priv->tiling_mode != I915_TILING_NONE)
1300 dspcntr |= DISPPLANE_TILED;
1302 dspcntr &= ~DISPPLANE_TILED;
1307 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
1309 I915_WRITE(dspcntr_reg, dspcntr);
1311 Start = obj_priv->gtt_offset;
1312 Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
1314 DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
1315 I915_WRITE(dspstride, crtc->fb->pitch);
1316 if (IS_I965G(dev)) {
1317 I915_WRITE(dspbase, Offset);
1319 I915_WRITE(dspsurf, Start);
1321 I915_WRITE(dsptileoff, (y << 16) | x);
1323 I915_WRITE(dspbase, Start + Offset);
1327 if ((IS_I965G(dev) || plane == 0))
1328 intel_update_fbc(crtc, &crtc->mode);
1330 intel_wait_for_vblank(dev);
1333 intel_fb = to_intel_framebuffer(old_fb);
1334 obj_priv = intel_fb->obj->driver_private;
1335 i915_gem_object_unpin(intel_fb->obj);
1337 intel_increase_pllclock(crtc, true);
1339 mutex_unlock(&dev->struct_mutex);
1341 if (!dev->primary->master)
1344 master_priv = dev->primary->master->driver_priv;
1345 if (!master_priv->sarea_priv)
1349 master_priv->sarea_priv->pipeB_x = x;
1350 master_priv->sarea_priv->pipeB_y = y;
1352 master_priv->sarea_priv->pipeA_x = x;
1353 master_priv->sarea_priv->pipeA_y = y;
1359 /* Disable the VGA plane that we never use */
1360 static void i915_disable_vga (struct drm_device *dev)
1362 struct drm_i915_private *dev_priv = dev->dev_private;
1367 vga_reg = CPU_VGACNTRL;
1371 if (I915_READ(vga_reg) & VGA_DISP_DISABLE)
1374 I915_WRITE8(VGA_SR_INDEX, 1);
1375 sr1 = I915_READ8(VGA_SR_DATA);
1376 I915_WRITE8(VGA_SR_DATA, sr1 | (1 << 5));
1379 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
1382 static void igdng_disable_pll_edp (struct drm_crtc *crtc)
1384 struct drm_device *dev = crtc->dev;
1385 struct drm_i915_private *dev_priv = dev->dev_private;
1389 dpa_ctl = I915_READ(DP_A);
1390 dpa_ctl &= ~DP_PLL_ENABLE;
1391 I915_WRITE(DP_A, dpa_ctl);
1394 static void igdng_enable_pll_edp (struct drm_crtc *crtc)
1396 struct drm_device *dev = crtc->dev;
1397 struct drm_i915_private *dev_priv = dev->dev_private;
1400 dpa_ctl = I915_READ(DP_A);
1401 dpa_ctl |= DP_PLL_ENABLE;
1402 I915_WRITE(DP_A, dpa_ctl);
1407 static void igdng_set_pll_edp (struct drm_crtc *crtc, int clock)
1409 struct drm_device *dev = crtc->dev;
1410 struct drm_i915_private *dev_priv = dev->dev_private;
1413 DRM_DEBUG("eDP PLL enable for clock %d\n", clock);
1414 dpa_ctl = I915_READ(DP_A);
1415 dpa_ctl &= ~DP_PLL_FREQ_MASK;
1417 if (clock < 200000) {
1419 dpa_ctl |= DP_PLL_FREQ_160MHZ;
1420 /* workaround for 160Mhz:
1421 1) program 0x4600c bits 15:0 = 0x8124
1422 2) program 0x46010 bit 0 = 1
1423 3) program 0x46034 bit 24 = 1
1424 4) program 0x64000 bit 14 = 1
1426 temp = I915_READ(0x4600c);
1428 I915_WRITE(0x4600c, temp | 0x8124);
1430 temp = I915_READ(0x46010);
1431 I915_WRITE(0x46010, temp | 1);
1433 temp = I915_READ(0x46034);
1434 I915_WRITE(0x46034, temp | (1 << 24));
1436 dpa_ctl |= DP_PLL_FREQ_270MHZ;
1438 I915_WRITE(DP_A, dpa_ctl);
1443 static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
1445 struct drm_device *dev = crtc->dev;
1446 struct drm_i915_private *dev_priv = dev->dev_private;
1447 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1448 int pipe = intel_crtc->pipe;
1449 int plane = intel_crtc->plane;
1450 int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
1451 int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
1452 int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
1453 int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
1454 int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
1455 int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
1456 int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR;
1457 int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
1458 int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
1459 int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
1460 int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
1461 int pf_win_pos = (pipe == 0) ? PFA_WIN_POS : PFB_WIN_POS;
1462 int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
1463 int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
1464 int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
1465 int cpu_vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
1466 int cpu_vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
1467 int cpu_vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
1468 int trans_htot_reg = (pipe == 0) ? TRANS_HTOTAL_A : TRANS_HTOTAL_B;
1469 int trans_hblank_reg = (pipe == 0) ? TRANS_HBLANK_A : TRANS_HBLANK_B;
1470 int trans_hsync_reg = (pipe == 0) ? TRANS_HSYNC_A : TRANS_HSYNC_B;
1471 int trans_vtot_reg = (pipe == 0) ? TRANS_VTOTAL_A : TRANS_VTOTAL_B;
1472 int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B;
1473 int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
1475 int tries = 5, j, n;
1477 /* XXX: When our outputs are all unaware of DPMS modes other than off
1478 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
1481 case DRM_MODE_DPMS_ON:
1482 case DRM_MODE_DPMS_STANDBY:
1483 case DRM_MODE_DPMS_SUSPEND:
1484 DRM_DEBUG("crtc %d dpms on\n", pipe);
1486 /* enable eDP PLL */
1487 igdng_enable_pll_edp(crtc);
1489 /* enable PCH DPLL */
1490 temp = I915_READ(pch_dpll_reg);
1491 if ((temp & DPLL_VCO_ENABLE) == 0) {
1492 I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
1493 I915_READ(pch_dpll_reg);
1496 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
1497 temp = I915_READ(fdi_rx_reg);
1498 I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
1500 FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
1501 I915_READ(fdi_rx_reg);
1504 /* Enable CPU FDI TX PLL, always on for IGDNG */
1505 temp = I915_READ(fdi_tx_reg);
1506 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
1507 I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
1508 I915_READ(fdi_tx_reg);
1513 /* Enable panel fitting for LVDS */
1514 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
1515 temp = I915_READ(pf_ctl_reg);
1516 I915_WRITE(pf_ctl_reg, temp | PF_ENABLE);
1518 /* currently full aspect */
1519 I915_WRITE(pf_win_pos, 0);
1521 I915_WRITE(pf_win_size,
1522 (dev_priv->panel_fixed_mode->hdisplay << 16) |
1523 (dev_priv->panel_fixed_mode->vdisplay));
1526 /* Enable CPU pipe */
1527 temp = I915_READ(pipeconf_reg);
1528 if ((temp & PIPEACONF_ENABLE) == 0) {
1529 I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
1530 I915_READ(pipeconf_reg);
1534 /* configure and enable CPU plane */
1535 temp = I915_READ(dspcntr_reg);
1536 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
1537 I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
1538 /* Flush the plane changes */
1539 I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
1543 /* enable CPU FDI TX and PCH FDI RX */
1544 temp = I915_READ(fdi_tx_reg);
1545 temp |= FDI_TX_ENABLE;
1546 temp |= FDI_DP_PORT_WIDTH_X4; /* default */
1547 temp &= ~FDI_LINK_TRAIN_NONE;
1548 temp |= FDI_LINK_TRAIN_PATTERN_1;
1549 I915_WRITE(fdi_tx_reg, temp);
1550 I915_READ(fdi_tx_reg);
1552 temp = I915_READ(fdi_rx_reg);
1553 temp &= ~FDI_LINK_TRAIN_NONE;
1554 temp |= FDI_LINK_TRAIN_PATTERN_1;
1555 I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
1556 I915_READ(fdi_rx_reg);
1561 /* umask FDI RX Interrupt symbol_lock and bit_lock bit
1563 temp = I915_READ(fdi_rx_imr_reg);
1564 temp &= ~FDI_RX_SYMBOL_LOCK;
1565 temp &= ~FDI_RX_BIT_LOCK;
1566 I915_WRITE(fdi_rx_imr_reg, temp);
1567 I915_READ(fdi_rx_imr_reg);
1570 temp = I915_READ(fdi_rx_iir_reg);
1571 DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
1573 if ((temp & FDI_RX_BIT_LOCK) == 0) {
1574 for (j = 0; j < tries; j++) {
1575 temp = I915_READ(fdi_rx_iir_reg);
1576 DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
1577 if (temp & FDI_RX_BIT_LOCK)
1582 I915_WRITE(fdi_rx_iir_reg,
1583 temp | FDI_RX_BIT_LOCK);
1585 DRM_DEBUG("train 1 fail\n");
1587 I915_WRITE(fdi_rx_iir_reg,
1588 temp | FDI_RX_BIT_LOCK);
1589 DRM_DEBUG("train 1 ok 2!\n");
1591 temp = I915_READ(fdi_tx_reg);
1592 temp &= ~FDI_LINK_TRAIN_NONE;
1593 temp |= FDI_LINK_TRAIN_PATTERN_2;
1594 I915_WRITE(fdi_tx_reg, temp);
1596 temp = I915_READ(fdi_rx_reg);
1597 temp &= ~FDI_LINK_TRAIN_NONE;
1598 temp |= FDI_LINK_TRAIN_PATTERN_2;
1599 I915_WRITE(fdi_rx_reg, temp);
1603 temp = I915_READ(fdi_rx_iir_reg);
1604 DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
1606 if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
1607 for (j = 0; j < tries; j++) {
1608 temp = I915_READ(fdi_rx_iir_reg);
1609 DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
1610 if (temp & FDI_RX_SYMBOL_LOCK)
1615 I915_WRITE(fdi_rx_iir_reg,
1616 temp | FDI_RX_SYMBOL_LOCK);
1617 DRM_DEBUG("train 2 ok 1!\n");
1619 DRM_DEBUG("train 2 fail\n");
1621 I915_WRITE(fdi_rx_iir_reg,
1622 temp | FDI_RX_SYMBOL_LOCK);
1623 DRM_DEBUG("train 2 ok 2!\n");
1625 DRM_DEBUG("train done\n");
1627 /* set transcoder timing */
1628 I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
1629 I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
1630 I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
1632 I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
1633 I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
1634 I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
1636 /* enable PCH transcoder */
1637 temp = I915_READ(transconf_reg);
1638 I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
1639 I915_READ(transconf_reg);
1641 while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
1646 temp = I915_READ(fdi_tx_reg);
1647 temp &= ~FDI_LINK_TRAIN_NONE;
1648 I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
1649 FDI_TX_ENHANCE_FRAME_ENABLE);
1650 I915_READ(fdi_tx_reg);
1652 temp = I915_READ(fdi_rx_reg);
1653 temp &= ~FDI_LINK_TRAIN_NONE;
1654 I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
1655 FDI_RX_ENHANCE_FRAME_ENABLE);
1656 I915_READ(fdi_rx_reg);
1658 /* wait one idle pattern time */
1663 intel_crtc_load_lut(crtc);
1666 case DRM_MODE_DPMS_OFF:
1667 DRM_DEBUG("crtc %d dpms off\n", pipe);
1669 i915_disable_vga(dev);
1671 /* Disable display plane */
1672 temp = I915_READ(dspcntr_reg);
1673 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
1674 I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
1675 /* Flush the plane changes */
1676 I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
1677 I915_READ(dspbase_reg);
1680 /* disable cpu pipe, disable after all planes disabled */
1681 temp = I915_READ(pipeconf_reg);
1682 if ((temp & PIPEACONF_ENABLE) != 0) {
1683 I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
1684 I915_READ(pipeconf_reg);
1686 /* wait for cpu pipe off, pipe state */
1687 while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) {
1693 DRM_DEBUG("pipe %d off delay\n", pipe);
1698 DRM_DEBUG("crtc %d is disabled\n", pipe);
1701 igdng_disable_pll_edp(crtc);
1704 /* disable CPU FDI tx and PCH FDI rx */
1705 temp = I915_READ(fdi_tx_reg);
1706 I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE);
1707 I915_READ(fdi_tx_reg);
1709 temp = I915_READ(fdi_rx_reg);
1710 I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
1711 I915_READ(fdi_rx_reg);
1715 /* still set train pattern 1 */
1716 temp = I915_READ(fdi_tx_reg);
1717 temp &= ~FDI_LINK_TRAIN_NONE;
1718 temp |= FDI_LINK_TRAIN_PATTERN_1;
1719 I915_WRITE(fdi_tx_reg, temp);
1721 temp = I915_READ(fdi_rx_reg);
1722 temp &= ~FDI_LINK_TRAIN_NONE;
1723 temp |= FDI_LINK_TRAIN_PATTERN_1;
1724 I915_WRITE(fdi_rx_reg, temp);
1728 /* disable PCH transcoder */
1729 temp = I915_READ(transconf_reg);
1730 if ((temp & TRANS_ENABLE) != 0) {
1731 I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
1732 I915_READ(transconf_reg);
1734 /* wait for PCH transcoder off, transcoder state */
1735 while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) {
1741 DRM_DEBUG("transcoder %d off delay\n", pipe);
1747 /* disable PCH DPLL */
1748 temp = I915_READ(pch_dpll_reg);
1749 if ((temp & DPLL_VCO_ENABLE) != 0) {
1750 I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
1751 I915_READ(pch_dpll_reg);
1754 temp = I915_READ(fdi_rx_reg);
1755 if ((temp & FDI_RX_PLL_ENABLE) != 0) {
1756 temp &= ~FDI_SEL_PCDCLK;
1757 temp &= ~FDI_RX_PLL_ENABLE;
1758 I915_WRITE(fdi_rx_reg, temp);
1759 I915_READ(fdi_rx_reg);
1762 /* Disable CPU FDI TX PLL */
1763 temp = I915_READ(fdi_tx_reg);
1764 if ((temp & FDI_TX_PLL_ENABLE) != 0) {
1765 I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
1766 I915_READ(fdi_tx_reg);
1771 temp = I915_READ(pf_ctl_reg);
1772 if ((temp & PF_ENABLE) != 0) {
1773 I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
1774 I915_READ(pf_ctl_reg);
1776 I915_WRITE(pf_win_size, 0);
1778 /* Wait for the clocks to turn off. */
1784 static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
1786 struct drm_device *dev = crtc->dev;
1787 struct drm_i915_private *dev_priv = dev->dev_private;
1788 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1789 int pipe = intel_crtc->pipe;
1790 int plane = intel_crtc->plane;
1791 int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
1792 int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
1793 int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
1794 int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
1797 /* XXX: When our outputs are all unaware of DPMS modes other than off
1798 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
1801 case DRM_MODE_DPMS_ON:
1802 case DRM_MODE_DPMS_STANDBY:
1803 case DRM_MODE_DPMS_SUSPEND:
1804 /* Enable the DPLL */
1805 temp = I915_READ(dpll_reg);
1806 if ((temp & DPLL_VCO_ENABLE) == 0) {
1807 I915_WRITE(dpll_reg, temp);
1808 I915_READ(dpll_reg);
1809 /* Wait for the clocks to stabilize. */
1811 I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
1812 I915_READ(dpll_reg);
1813 /* Wait for the clocks to stabilize. */
1815 I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
1816 I915_READ(dpll_reg);
1817 /* Wait for the clocks to stabilize. */
1821 /* Enable the pipe */
1822 temp = I915_READ(pipeconf_reg);
1823 if ((temp & PIPEACONF_ENABLE) == 0)
1824 I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
1826 /* Enable the plane */
1827 temp = I915_READ(dspcntr_reg);
1828 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
1829 I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
1830 /* Flush the plane changes */
1831 I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
1834 intel_crtc_load_lut(crtc);
1836 if ((IS_I965G(dev) || plane == 0))
1837 intel_update_fbc(crtc, &crtc->mode);
1839 /* Give the overlay scaler a chance to enable if it's on this pipe */
1840 //intel_crtc_dpms_video(crtc, true); TODO
1841 intel_update_watermarks(dev);
1843 case DRM_MODE_DPMS_OFF:
1844 intel_update_watermarks(dev);
1845 /* Give the overlay scaler a chance to disable if it's on this pipe */
1846 //intel_crtc_dpms_video(crtc, FALSE); TODO
1848 if (dev_priv->cfb_plane == plane &&
1849 dev_priv->display.disable_fbc)
1850 dev_priv->display.disable_fbc(dev);
1852 /* Disable the VGA plane that we never use */
1853 i915_disable_vga(dev);
1855 /* Disable display plane */
1856 temp = I915_READ(dspcntr_reg);
1857 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
1858 I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
1859 /* Flush the plane changes */
1860 I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
1861 I915_READ(dspbase_reg);
1864 if (!IS_I9XX(dev)) {
1865 /* Wait for vblank for the disable to take effect */
1866 intel_wait_for_vblank(dev);
1869 /* Next, disable display pipes */
1870 temp = I915_READ(pipeconf_reg);
1871 if ((temp & PIPEACONF_ENABLE) != 0) {
1872 I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
1873 I915_READ(pipeconf_reg);
1876 /* Wait for vblank for the disable to take effect. */
1877 intel_wait_for_vblank(dev);
1879 temp = I915_READ(dpll_reg);
1880 if ((temp & DPLL_VCO_ENABLE) != 0) {
1881 I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
1882 I915_READ(dpll_reg);
1885 /* Wait for the clocks to turn off. */
1892 * Sets the power management mode of the pipe and plane.
1894 * This code should probably grow support for turning the cursor off and back
1895 * on appropriately at the same time as we're turning the pipe off/on.
1897 static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
1899 struct drm_device *dev = crtc->dev;
1900 struct drm_i915_private *dev_priv = dev->dev_private;
1901 struct drm_i915_master_private *master_priv;
1902 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1903 int pipe = intel_crtc->pipe;
1906 dev_priv->display.dpms(crtc, mode);
1908 intel_crtc->dpms_mode = mode;
1910 if (!dev->primary->master)
1913 master_priv = dev->primary->master->driver_priv;
1914 if (!master_priv->sarea_priv)
1917 enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
1921 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
1922 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
1925 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
1926 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
1929 DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
1934 static void intel_crtc_prepare (struct drm_crtc *crtc)
1936 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
1937 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
1940 static void intel_crtc_commit (struct drm_crtc *crtc)
1942 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
1943 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
1946 void intel_encoder_prepare (struct drm_encoder *encoder)
1948 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
1949 /* lvds has its own version of prepare see intel_lvds_prepare */
1950 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
1953 void intel_encoder_commit (struct drm_encoder *encoder)
1955 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
1956 /* lvds has its own version of commit see intel_lvds_commit */
1957 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
1960 static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
1961 struct drm_display_mode *mode,
1962 struct drm_display_mode *adjusted_mode)
1964 struct drm_device *dev = crtc->dev;
1965 if (IS_IGDNG(dev)) {
1966 /* FDI link clock is fixed at 2.7G */
1967 if (mode->clock * 3 > 27000 * 4)
1968 return MODE_CLOCK_HIGH;
1973 static int i945_get_display_clock_speed(struct drm_device *dev)
1978 static int i915_get_display_clock_speed(struct drm_device *dev)
1983 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
1988 static int i915gm_get_display_clock_speed(struct drm_device *dev)
1992 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
1994 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
1997 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
1998 case GC_DISPLAY_CLOCK_333_MHZ:
2001 case GC_DISPLAY_CLOCK_190_200_MHZ:
2007 static int i865_get_display_clock_speed(struct drm_device *dev)
2012 static int i855_get_display_clock_speed(struct drm_device *dev)
2015 /* Assume that the hardware is in the high speed state. This
2016 * should be the default.
2018 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
2019 case GC_CLOCK_133_200:
2020 case GC_CLOCK_100_200:
2022 case GC_CLOCK_166_250:
2024 case GC_CLOCK_100_133:
2028 /* Shouldn't happen */
2032 static int i830_get_display_clock_speed(struct drm_device *dev)
2038 * Return the pipe currently connected to the panel fitter,
2039 * or -1 if the panel fitter is not present or not in use
2041 static int intel_panel_fitter_pipe (struct drm_device *dev)
2043 struct drm_i915_private *dev_priv = dev->dev_private;
2046 /* i830 doesn't have a panel fitter */
2050 pfit_control = I915_READ(PFIT_CONTROL);
2052 /* See if the panel fitter is in use */
2053 if ((pfit_control & PFIT_ENABLE) == 0)
2056 /* 965 can place panel fitter on either pipe */
2058 return (pfit_control >> 29) & 0x3;
2060 /* older chips can only use pipe 1 */
2073 fdi_reduce_ratio(u32 *num, u32 *den)
2075 while (*num > 0xffffff || *den > 0xffffff) {
2081 #define DATA_N 0x800000
2082 #define LINK_N 0x80000
2085 igdng_compute_m_n(int bytes_per_pixel, int nlanes,
2086 int pixel_clock, int link_clock,
2087 struct fdi_m_n *m_n)
2091 m_n->tu = 64; /* default size */
2093 temp = (u64) DATA_N * pixel_clock;
2094 temp = div_u64(temp, link_clock);
2095 m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes);
2096 m_n->gmch_n = DATA_N;
2097 fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
2099 temp = (u64) LINK_N * pixel_clock;
2100 m_n->link_m = div_u64(temp, link_clock);
2101 m_n->link_n = LINK_N;
2102 fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
2106 struct intel_watermark_params {
2107 unsigned long fifo_size;
2108 unsigned long max_wm;
2109 unsigned long default_wm;
2110 unsigned long guard_size;
2111 unsigned long cacheline_size;
2114 /* IGD has different values for various configs */
2115 static struct intel_watermark_params igd_display_wm = {
2122 static struct intel_watermark_params igd_display_hplloff_wm = {
2129 static struct intel_watermark_params igd_cursor_wm = {
2133 IGD_CURSOR_GUARD_WM,
2136 static struct intel_watermark_params igd_cursor_hplloff_wm = {
2140 IGD_CURSOR_GUARD_WM,
2143 static struct intel_watermark_params i945_wm_info = {
2150 static struct intel_watermark_params i915_wm_info = {
2157 static struct intel_watermark_params i855_wm_info = {
2164 static struct intel_watermark_params i830_wm_info = {
2173 * intel_calculate_wm - calculate watermark level
2174 * @clock_in_khz: pixel clock
2175 * @wm: chip FIFO params
2176 * @pixel_size: display pixel size
2177 * @latency_ns: memory latency for the platform
2179 * Calculate the watermark level (the level at which the display plane will
2180 * start fetching from memory again). Each chip has a different display
2181 * FIFO size and allocation, so the caller needs to figure that out and pass
2182 * in the correct intel_watermark_params structure.
2184 * As the pixel clock runs, the FIFO will be drained at a rate that depends
2185 * on the pixel size. When it reaches the watermark level, it'll start
2186 * fetching FIFO line sized based chunks from memory until the FIFO fills
2187 * past the watermark point. If the FIFO drains completely, a FIFO underrun
2188 * will occur, and a display engine hang could result.
2190 static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
2191 struct intel_watermark_params *wm,
2193 unsigned long latency_ns)
2195 long entries_required, wm_size;
2198 * Note: we need to make sure we don't overflow for various clock &
2200 * clocks go from a few thousand to several hundred thousand.
2201 * latency is usually a few thousand
2203 entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
2205 entries_required /= wm->cacheline_size;
2207 DRM_DEBUG("FIFO entries required for mode: %d\n", entries_required);
2209 wm_size = wm->fifo_size - (entries_required + wm->guard_size);
2211 DRM_DEBUG("FIFO watermark level: %d\n", wm_size);
2213 /* Don't promote wm_size to unsigned... */
2214 if (wm_size > (long)wm->max_wm)
2215 wm_size = wm->max_wm;
2217 wm_size = wm->default_wm;
2221 struct cxsr_latency {
2223 unsigned long fsb_freq;
2224 unsigned long mem_freq;
2225 unsigned long display_sr;
2226 unsigned long display_hpll_disable;
2227 unsigned long cursor_sr;
2228 unsigned long cursor_hpll_disable;
2231 static struct cxsr_latency cxsr_latency_table[] = {
2232 {1, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
2233 {1, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
2234 {1, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
2236 {1, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
2237 {1, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
2238 {1, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
2240 {1, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
2241 {1, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
2242 {1, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
2244 {0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
2245 {0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
2246 {0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
2248 {0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
2249 {0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
2250 {0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
2252 {0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
2253 {0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
2254 {0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
2257 static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb,
2261 struct cxsr_latency *latency;
2263 if (fsb == 0 || mem == 0)
2266 for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
2267 latency = &cxsr_latency_table[i];
2268 if (is_desktop == latency->is_desktop &&
2269 fsb == latency->fsb_freq && mem == latency->mem_freq)
2273 DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
2278 static void igd_disable_cxsr(struct drm_device *dev)
2280 struct drm_i915_private *dev_priv = dev->dev_private;
2283 /* deactivate cxsr */
2284 reg = I915_READ(DSPFW3);
2285 reg &= ~(IGD_SELF_REFRESH_EN);
2286 I915_WRITE(DSPFW3, reg);
2287 DRM_INFO("Big FIFO is disabled\n");
2290 static void igd_enable_cxsr(struct drm_device *dev, unsigned long clock,
2293 struct drm_i915_private *dev_priv = dev->dev_private;
2296 struct cxsr_latency *latency;
2298 latency = intel_get_cxsr_latency(IS_IGDG(dev), dev_priv->fsb_freq,
2299 dev_priv->mem_freq);
2301 DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
2302 igd_disable_cxsr(dev);
2307 wm = intel_calculate_wm(clock, &igd_display_wm, pixel_size,
2308 latency->display_sr);
2309 reg = I915_READ(DSPFW1);
2312 I915_WRITE(DSPFW1, reg);
2313 DRM_DEBUG("DSPFW1 register is %x\n", reg);
2316 wm = intel_calculate_wm(clock, &igd_cursor_wm, pixel_size,
2317 latency->cursor_sr);
2318 reg = I915_READ(DSPFW3);
2319 reg &= ~(0x3f << 24);
2320 reg |= (wm & 0x3f) << 24;
2321 I915_WRITE(DSPFW3, reg);
2323 /* Display HPLL off SR */
2324 wm = intel_calculate_wm(clock, &igd_display_hplloff_wm,
2325 latency->display_hpll_disable, I915_FIFO_LINE_SIZE);
2326 reg = I915_READ(DSPFW3);
2329 I915_WRITE(DSPFW3, reg);
2331 /* cursor HPLL off SR */
2332 wm = intel_calculate_wm(clock, &igd_cursor_hplloff_wm, pixel_size,
2333 latency->cursor_hpll_disable);
2334 reg = I915_READ(DSPFW3);
2335 reg &= ~(0x3f << 16);
2336 reg |= (wm & 0x3f) << 16;
2337 I915_WRITE(DSPFW3, reg);
2338 DRM_DEBUG("DSPFW3 register is %x\n", reg);
2341 reg = I915_READ(DSPFW3);
2342 reg |= IGD_SELF_REFRESH_EN;
2343 I915_WRITE(DSPFW3, reg);
2345 DRM_INFO("Big FIFO is enabled\n");
2351 * Latency for FIFO fetches is dependent on several factors:
2352 * - memory configuration (speed, channels)
2354 * - current MCH state
2355 * It can be fairly high in some situations, so here we assume a fairly
2356 * pessimal value. It's a tradeoff between extra memory fetches (if we
2357 * set this value too high, the FIFO will fetch frequently to stay full)
2358 * and power consumption (set it too low to save power and we might see
2359 * FIFO underruns and display "flicker").
2361 * A value of 5us seems to be a good balance; safe for very low end
2362 * platforms but not overly aggressive on lower latency configs.
2364 const static int latency_ns = 5000;
2366 static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
2368 struct drm_i915_private *dev_priv = dev->dev_private;
2369 uint32_t dsparb = I915_READ(DSPARB);
2373 size = dsparb & 0x7f;
2375 size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) -
2378 DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
2384 static int i85x_get_fifo_size(struct drm_device *dev, int plane)
2386 struct drm_i915_private *dev_priv = dev->dev_private;
2387 uint32_t dsparb = I915_READ(DSPARB);
2391 size = dsparb & 0x1ff;
2393 size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) -
2395 size >>= 1; /* Convert to cachelines */
2397 DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
2403 static int i845_get_fifo_size(struct drm_device *dev, int plane)
2405 struct drm_i915_private *dev_priv = dev->dev_private;
2406 uint32_t dsparb = I915_READ(DSPARB);
2409 size = dsparb & 0x7f;
2410 size >>= 2; /* Convert to cachelines */
2412 DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
2418 static int i830_get_fifo_size(struct drm_device *dev, int plane)
2420 struct drm_i915_private *dev_priv = dev->dev_private;
2421 uint32_t dsparb = I915_READ(DSPARB);
2424 size = dsparb & 0x7f;
2425 size >>= 1; /* Convert to cachelines */
2427 DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
2433 static void g4x_update_wm(struct drm_device *dev, int unused, int unused2,
2434 int unused3, int unused4)
2436 struct drm_i915_private *dev_priv = dev->dev_private;
2437 u32 fw_blc_self = I915_READ(FW_BLC_SELF);
2440 fw_blc_self |= FW_BLC_SELF_EN;
2442 fw_blc_self &= ~FW_BLC_SELF_EN;
2443 I915_WRITE(FW_BLC_SELF, fw_blc_self);
2446 static void i965_update_wm(struct drm_device *dev, int unused, int unused2,
2447 int unused3, int unused4)
2449 struct drm_i915_private *dev_priv = dev->dev_private;
2451 DRM_DEBUG("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 8\n");
2453 /* 965 has limitations... */
2454 I915_WRITE(DSPFW1, (8 << 16) | (8 << 8) | (8 << 0));
2455 I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
2458 static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
2459 int planeb_clock, int sr_hdisplay, int pixel_size)
2461 struct drm_i915_private *dev_priv = dev->dev_private;
2464 int total_size, cacheline_size, cwm, srwm = 1;
2465 int planea_wm, planeb_wm;
2466 struct intel_watermark_params planea_params, planeb_params;
2467 unsigned long line_time_us;
2468 int sr_clock, sr_entries = 0;
2470 /* Create copies of the base settings for each pipe */
2471 if (IS_I965GM(dev) || IS_I945GM(dev))
2472 planea_params = planeb_params = i945_wm_info;
2473 else if (IS_I9XX(dev))
2474 planea_params = planeb_params = i915_wm_info;
2476 planea_params = planeb_params = i855_wm_info;
2478 /* Grab a couple of global values before we overwrite them */
2479 total_size = planea_params.fifo_size;
2480 cacheline_size = planea_params.cacheline_size;
2482 /* Update per-plane FIFO sizes */
2483 planea_params.fifo_size = dev_priv->display.get_fifo_size(dev, 0);
2484 planeb_params.fifo_size = dev_priv->display.get_fifo_size(dev, 1);
2486 planea_wm = intel_calculate_wm(planea_clock, &planea_params,
2487 pixel_size, latency_ns);
2488 planeb_wm = intel_calculate_wm(planeb_clock, &planeb_params,
2489 pixel_size, latency_ns);
2490 DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
2493 * Overlay gets an aggressive default since video jitter is bad.
2497 /* Calc sr entries for one plane configs */
2498 if (HAS_FW_BLC(dev) && sr_hdisplay &&
2499 (!planea_clock || !planeb_clock)) {
2500 /* self-refresh has much higher latency */
2501 const static int sr_latency_ns = 6000;
2503 sr_clock = planea_clock ? planea_clock : planeb_clock;
2504 line_time_us = ((sr_hdisplay * 1000) / sr_clock);
2506 /* Use ns/us then divide to preserve precision */
2507 sr_entries = (((sr_latency_ns / line_time_us) + 1) *
2508 pixel_size * sr_hdisplay) / 1000;
2509 sr_entries = roundup(sr_entries / cacheline_size, 1);
2510 DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
2511 srwm = total_size - sr_entries;
2514 I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f));
2517 DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
2518 planea_wm, planeb_wm, cwm, srwm);
2520 fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
2521 fwater_hi = (cwm & 0x1f);
2523 /* Set request length to 8 cachelines per fetch */
2524 fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
2525 fwater_hi = fwater_hi | (1 << 8);
2527 I915_WRITE(FW_BLC, fwater_lo);
2528 I915_WRITE(FW_BLC2, fwater_hi);
2531 static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused,
2532 int unused2, int pixel_size)
2534 struct drm_i915_private *dev_priv = dev->dev_private;
2535 uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff;
2538 i830_wm_info.fifo_size = dev_priv->display.get_fifo_size(dev, 0);
2540 planea_wm = intel_calculate_wm(planea_clock, &i830_wm_info,
2541 pixel_size, latency_ns);
2542 fwater_lo |= (3<<8) | planea_wm;
2544 DRM_DEBUG("Setting FIFO watermarks - A: %d\n", planea_wm);
2546 I915_WRITE(FW_BLC, fwater_lo);
2550 * intel_update_watermarks - update FIFO watermark values based on current modes
2552 * Calculate watermark values for the various WM regs based on current mode
2553 * and plane configuration.
2555 * There are several cases to deal with here:
2556 * - normal (i.e. non-self-refresh)
2557 * - self-refresh (SR) mode
2558 * - lines are large relative to FIFO size (buffer can hold up to 2)
2559 * - lines are small relative to FIFO size (buffer can hold more than 2
2560 * lines), so need to account for TLB latency
2562 * The normal calculation is:
2563 * watermark = dotclock * bytes per pixel * latency
2564 * where latency is platform & configuration dependent (we assume pessimal
2567 * The SR calculation is:
2568 * watermark = (trunc(latency/line time)+1) * surface width *
2571 * line time = htotal / dotclock
2572 * and latency is assumed to be high, as above.
2574 * The final value programmed to the register should always be rounded up,
2575 * and include an extra 2 entries to account for clock crossings.
2577 * We don't use the sprite, so we can ignore that. And on Crestline we have
2578 * to set the non-SR watermarks to 8.
2580 static void intel_update_watermarks(struct drm_device *dev)
2582 struct drm_i915_private *dev_priv = dev->dev_private;
2583 struct drm_crtc *crtc;
2584 struct intel_crtc *intel_crtc;
2585 int sr_hdisplay = 0;
2586 unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
2587 int enabled = 0, pixel_size = 0;
2589 /* Get the clock config from both planes */
2590 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2591 intel_crtc = to_intel_crtc(crtc);
2592 if (crtc->enabled) {
2594 if (intel_crtc->plane == 0) {
2595 DRM_DEBUG("plane A (pipe %d) clock: %d\n",
2596 intel_crtc->pipe, crtc->mode.clock);
2597 planea_clock = crtc->mode.clock;
2599 DRM_DEBUG("plane B (pipe %d) clock: %d\n",
2600 intel_crtc->pipe, crtc->mode.clock);
2601 planeb_clock = crtc->mode.clock;
2603 sr_hdisplay = crtc->mode.hdisplay;
2604 sr_clock = crtc->mode.clock;
2606 pixel_size = crtc->fb->bits_per_pixel / 8;
2608 pixel_size = 4; /* by default */
2615 /* Single plane configs can enable self refresh */
2616 if (enabled == 1 && IS_IGD(dev))
2617 igd_enable_cxsr(dev, sr_clock, pixel_size);
2618 else if (IS_IGD(dev))
2619 igd_disable_cxsr(dev);
2621 dev_priv->display.update_wm(dev, planea_clock, planeb_clock,
2622 sr_hdisplay, pixel_size);
2625 static int intel_crtc_mode_set(struct drm_crtc *crtc,
2626 struct drm_display_mode *mode,
2627 struct drm_display_mode *adjusted_mode,
2629 struct drm_framebuffer *old_fb)
2631 struct drm_device *dev = crtc->dev;
2632 struct drm_i915_private *dev_priv = dev->dev_private;
2633 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2634 int pipe = intel_crtc->pipe;
2635 int plane = intel_crtc->plane;
2636 int fp_reg = (pipe == 0) ? FPA0 : FPB0;
2637 int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
2638 int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
2639 int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
2640 int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
2641 int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
2642 int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
2643 int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
2644 int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
2645 int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
2646 int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
2647 int dspsize_reg = (plane == 0) ? DSPASIZE : DSPBSIZE;
2648 int dsppos_reg = (plane == 0) ? DSPAPOS : DSPBPOS;
2649 int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
2650 int refclk, num_outputs = 0;
2651 intel_clock_t clock, reduced_clock;
2652 u32 dpll = 0, fp = 0, fp2 = 0, dspcntr, pipeconf;
2653 bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
2654 bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
2655 bool is_edp = false;
2656 struct drm_mode_config *mode_config = &dev->mode_config;
2657 struct drm_connector *connector;
2658 const intel_limit_t *limit;
2660 struct fdi_m_n m_n = {0};
2661 int data_m1_reg = (pipe == 0) ? PIPEA_DATA_M1 : PIPEB_DATA_M1;
2662 int data_n1_reg = (pipe == 0) ? PIPEA_DATA_N1 : PIPEB_DATA_N1;
2663 int link_m1_reg = (pipe == 0) ? PIPEA_LINK_M1 : PIPEB_LINK_M1;
2664 int link_n1_reg = (pipe == 0) ? PIPEA_LINK_N1 : PIPEB_LINK_N1;
2665 int pch_fp_reg = (pipe == 0) ? PCH_FPA0 : PCH_FPB0;
2666 int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
2667 int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
2668 int lvds_reg = LVDS;
2670 int sdvo_pixel_multiply;
2673 drm_vblank_pre_modeset(dev, pipe);
2675 list_for_each_entry(connector, &mode_config->connector_list, head) {
2676 struct intel_output *intel_output = to_intel_output(connector);
2678 if (!connector->encoder || connector->encoder->crtc != crtc)
2681 switch (intel_output->type) {
2682 case INTEL_OUTPUT_LVDS:
2685 case INTEL_OUTPUT_SDVO:
2686 case INTEL_OUTPUT_HDMI:
2688 if (intel_output->needs_tv_clock)
2691 case INTEL_OUTPUT_DVO:
2694 case INTEL_OUTPUT_TVOUT:
2697 case INTEL_OUTPUT_ANALOG:
2700 case INTEL_OUTPUT_DISPLAYPORT:
2703 case INTEL_OUTPUT_EDP:
2711 if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) {
2712 refclk = dev_priv->lvds_ssc_freq * 1000;
2713 DRM_DEBUG("using SSC reference clock of %d MHz\n", refclk / 1000);
2714 } else if (IS_I9XX(dev)) {
2717 refclk = 120000; /* 120Mhz refclk */
2724 * Returns a set of divisors for the desired target clock with the given
2725 * refclk, or FALSE. The returned values represent the clock equation:
2726 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
2728 limit = intel_limit(crtc);
2729 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
2731 DRM_ERROR("Couldn't find PLL settings for mode!\n");
2732 drm_vblank_post_modeset(dev, pipe);
2736 if (limit->find_reduced_pll && dev_priv->lvds_downclock_avail) {
2737 memcpy(&reduced_clock, &clock, sizeof(intel_clock_t));
2738 has_reduced_clock = limit->find_reduced_pll(limit, crtc,
2739 (adjusted_mode->clock*3/4),
2744 /* SDVO TV has fixed PLL values depend on its clock range,
2745 this mirrors vbios setting. */
2746 if (is_sdvo && is_tv) {
2747 if (adjusted_mode->clock >= 100000
2748 && adjusted_mode->clock < 140500) {
2754 } else if (adjusted_mode->clock >= 140500
2755 && adjusted_mode->clock <= 200000) {
2765 if (IS_IGDNG(dev)) {
2767 /* eDP doesn't require FDI link, so just set DP M/N
2768 according to current link config */
2770 struct drm_connector *edp;
2771 target_clock = mode->clock;
2772 edp = intel_pipe_get_output(crtc);
2773 intel_edp_link_config(to_intel_output(edp),
2776 /* DP over FDI requires target mode clock
2777 instead of link clock */
2779 target_clock = mode->clock;
2781 target_clock = adjusted_mode->clock;
2785 igdng_compute_m_n(3, lane, target_clock,
2790 fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
2791 if (has_reduced_clock)
2792 fp2 = (1 << reduced_clock.n) << 16 |
2793 reduced_clock.m1 << 8 | reduced_clock.m2;
2795 fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
2796 if (has_reduced_clock)
2797 fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
2802 dpll = DPLL_VGA_MODE_DIS;
2806 dpll |= DPLLB_MODE_LVDS;
2808 dpll |= DPLLB_MODE_DAC_SERIAL;
2810 dpll |= DPLL_DVO_HIGH_SPEED;
2811 sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
2812 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
2813 dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
2814 else if (IS_IGDNG(dev))
2815 dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
2818 dpll |= DPLL_DVO_HIGH_SPEED;
2820 /* compute bitmask from p1 value */
2822 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_IGD;
2824 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
2827 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
2828 if (IS_G4X(dev) && has_reduced_clock)
2829 dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
2833 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
2836 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
2839 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
2842 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
2845 if (IS_I965G(dev) && !IS_IGDNG(dev))
2846 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
2849 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
2852 dpll |= PLL_P1_DIVIDE_BY_TWO;
2854 dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
2856 dpll |= PLL_P2_DIVIDE_BY_4;
2860 if (is_sdvo && is_tv)
2861 dpll |= PLL_REF_INPUT_TVCLKINBC;
2863 /* XXX: just matching BIOS for now */
2864 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
2866 else if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2)
2867 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
2869 dpll |= PLL_REF_INPUT_DREFCLK;
2871 /* setup pipeconf */
2872 pipeconf = I915_READ(pipeconf_reg);
2874 /* Set up the display plane register */
2875 dspcntr = DISPPLANE_GAMMA_ENABLE;
2877 /* IGDNG's plane is forced to pipe, bit 24 is to
2878 enable color space conversion */
2879 if (!IS_IGDNG(dev)) {
2881 dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
2883 dspcntr |= DISPPLANE_SEL_PIPE_B;
2886 if (pipe == 0 && !IS_I965G(dev)) {
2887 /* Enable pixel doubling when the dot clock is > 90% of the (display)
2890 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
2894 dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
2895 pipeconf |= PIPEACONF_DOUBLE_WIDE;
2897 pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
2900 dspcntr |= DISPLAY_PLANE_ENABLE;
2901 pipeconf |= PIPEACONF_ENABLE;
2902 dpll |= DPLL_VCO_ENABLE;
2905 /* Disable the panel fitter if it was on our pipe */
2906 if (!IS_IGDNG(dev) && intel_panel_fitter_pipe(dev) == pipe)
2907 I915_WRITE(PFIT_CONTROL, 0);
2909 DRM_DEBUG("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
2910 drm_mode_debug_printmodeline(mode);
2912 /* assign to IGDNG registers */
2913 if (IS_IGDNG(dev)) {
2914 fp_reg = pch_fp_reg;
2915 dpll_reg = pch_dpll_reg;
2919 igdng_disable_pll_edp(crtc);
2920 } else if ((dpll & DPLL_VCO_ENABLE)) {
2921 I915_WRITE(fp_reg, fp);
2922 I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
2923 I915_READ(dpll_reg);
2927 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
2928 * This is an exception to the general rule that mode_set doesn't turn
2935 lvds_reg = PCH_LVDS;
2937 lvds = I915_READ(lvds_reg);
2938 lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
2939 /* Set the B0-B3 data pairs corresponding to whether we're going to
2940 * set the DPLLs for dual-channel mode or not.
2943 lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
2945 lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
2947 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
2948 * appropriately here, but we need to look more thoroughly into how
2949 * panels behave in the two modes.
2952 I915_WRITE(lvds_reg, lvds);
2953 I915_READ(lvds_reg);
2956 intel_dp_set_m_n(crtc, mode, adjusted_mode);
2959 I915_WRITE(fp_reg, fp);
2960 I915_WRITE(dpll_reg, dpll);
2961 I915_READ(dpll_reg);
2962 /* Wait for the clocks to stabilize. */
2965 if (IS_I965G(dev) && !IS_IGDNG(dev)) {
2967 sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
2968 I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
2969 ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
2971 I915_WRITE(dpll_md_reg, 0);
2973 /* write it again -- the BIOS does, after all */
2974 I915_WRITE(dpll_reg, dpll);
2976 I915_READ(dpll_reg);
2977 /* Wait for the clocks to stabilize. */
2981 if (is_lvds && has_reduced_clock && i915_powersave) {
2982 I915_WRITE(fp_reg + 4, fp2);
2983 intel_crtc->lowfreq_avail = true;
2984 if (HAS_PIPE_CXSR(dev)) {
2985 DRM_DEBUG("enabling CxSR downclocking\n");
2986 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
2989 I915_WRITE(fp_reg + 4, fp);
2990 intel_crtc->lowfreq_avail = false;
2991 if (HAS_PIPE_CXSR(dev)) {
2992 DRM_DEBUG("disabling CxSR downclocking\n");
2993 pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
2997 I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
2998 ((adjusted_mode->crtc_htotal - 1) << 16));
2999 I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
3000 ((adjusted_mode->crtc_hblank_end - 1) << 16));
3001 I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
3002 ((adjusted_mode->crtc_hsync_end - 1) << 16));
3003 I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
3004 ((adjusted_mode->crtc_vtotal - 1) << 16));
3005 I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
3006 ((adjusted_mode->crtc_vblank_end - 1) << 16));
3007 I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
3008 ((adjusted_mode->crtc_vsync_end - 1) << 16));
3009 /* pipesrc and dspsize control the size that is scaled from, which should
3010 * always be the user's requested size.
3012 if (!IS_IGDNG(dev)) {
3013 I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) |
3014 (mode->hdisplay - 1));
3015 I915_WRITE(dsppos_reg, 0);
3017 I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
3019 if (IS_IGDNG(dev)) {
3020 I915_WRITE(data_m1_reg, TU_SIZE(m_n.tu) | m_n.gmch_m);
3021 I915_WRITE(data_n1_reg, TU_SIZE(m_n.tu) | m_n.gmch_n);
3022 I915_WRITE(link_m1_reg, m_n.link_m);
3023 I915_WRITE(link_n1_reg, m_n.link_n);
3026 igdng_set_pll_edp(crtc, adjusted_mode->clock);
3028 /* enable FDI RX PLL too */
3029 temp = I915_READ(fdi_rx_reg);
3030 I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
3035 I915_WRITE(pipeconf_reg, pipeconf);
3036 I915_READ(pipeconf_reg);
3038 intel_wait_for_vblank(dev);
3040 if (IS_IGDNG(dev)) {
3041 /* enable address swizzle for tiling buffer */
3042 temp = I915_READ(DISP_ARB_CTL);
3043 I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING);
3046 I915_WRITE(dspcntr_reg, dspcntr);
3048 /* Flush the plane changes */
3049 ret = intel_pipe_set_base(crtc, x, y, old_fb);
3051 if ((IS_I965G(dev) || plane == 0))
3052 intel_update_fbc(crtc, &crtc->mode);
3054 intel_update_watermarks(dev);
3056 drm_vblank_post_modeset(dev, pipe);
3061 /** Loads the palette/gamma unit for the CRTC with the prepared values */
3062 void intel_crtc_load_lut(struct drm_crtc *crtc)
3064 struct drm_device *dev = crtc->dev;
3065 struct drm_i915_private *dev_priv = dev->dev_private;
3066 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3067 int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B;
3070 /* The clocks have to be on to load the palette. */
3074 /* use legacy palette for IGDNG */
3076 palreg = (intel_crtc->pipe == 0) ? LGC_PALETTE_A :
3079 for (i = 0; i < 256; i++) {
3080 I915_WRITE(palreg + 4 * i,
3081 (intel_crtc->lut_r[i] << 16) |
3082 (intel_crtc->lut_g[i] << 8) |
3083 intel_crtc->lut_b[i]);
3087 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
3088 struct drm_file *file_priv,
3090 uint32_t width, uint32_t height)
3092 struct drm_device *dev = crtc->dev;
3093 struct drm_i915_private *dev_priv = dev->dev_private;
3094 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3095 struct drm_gem_object *bo;
3096 struct drm_i915_gem_object *obj_priv;
3097 int pipe = intel_crtc->pipe;
3098 int plane = intel_crtc->plane;
3099 uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
3100 uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
3101 uint32_t temp = I915_READ(control);
3107 /* if we want to turn off the cursor ignore width and height */
3109 DRM_DEBUG("cursor off\n");
3110 if (IS_MOBILE(dev) || IS_I9XX(dev)) {
3111 temp &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
3112 temp |= CURSOR_MODE_DISABLE;
3114 temp &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
3118 mutex_lock(&dev->struct_mutex);
3122 /* Currently we only support 64x64 cursors */
3123 if (width != 64 || height != 64) {
3124 DRM_ERROR("we currently only support 64x64 cursors\n");
3128 bo = drm_gem_object_lookup(dev, file_priv, handle);
3132 obj_priv = bo->driver_private;
3134 if (bo->size < width * height * 4) {
3135 DRM_ERROR("buffer is to small\n");
3140 /* we only need to pin inside GTT if cursor is non-phy */
3141 mutex_lock(&dev->struct_mutex);
3142 if (!dev_priv->cursor_needs_physical) {
3143 ret = i915_gem_object_pin(bo, PAGE_SIZE);
3145 DRM_ERROR("failed to pin cursor bo\n");
3148 addr = obj_priv->gtt_offset;
3150 ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
3152 DRM_ERROR("failed to attach phys object\n");
3155 addr = obj_priv->phys_obj->handle->busaddr;
3159 I915_WRITE(CURSIZE, (height << 12) | width);
3161 /* Hooray for CUR*CNTR differences */
3162 if (IS_MOBILE(dev) || IS_I9XX(dev)) {
3163 temp &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
3164 temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
3165 temp |= (pipe << 28); /* Connect to correct pipe */
3167 temp &= ~(CURSOR_FORMAT_MASK);
3168 temp |= CURSOR_ENABLE;
3169 temp |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE;
3173 I915_WRITE(control, temp);
3174 I915_WRITE(base, addr);
3176 if (intel_crtc->cursor_bo) {
3177 if (dev_priv->cursor_needs_physical) {
3178 if (intel_crtc->cursor_bo != bo)
3179 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
3181 i915_gem_object_unpin(intel_crtc->cursor_bo);
3182 drm_gem_object_unreference(intel_crtc->cursor_bo);
3185 if ((IS_I965G(dev) || plane == 0))
3186 intel_update_fbc(crtc, &crtc->mode);
3188 mutex_unlock(&dev->struct_mutex);
3190 intel_crtc->cursor_addr = addr;
3191 intel_crtc->cursor_bo = bo;
3195 mutex_lock(&dev->struct_mutex);
3197 drm_gem_object_unreference(bo);
3198 mutex_unlock(&dev->struct_mutex);
3202 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
3204 struct drm_device *dev = crtc->dev;
3205 struct drm_i915_private *dev_priv = dev->dev_private;
3206 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3207 struct intel_framebuffer *intel_fb;
3208 int pipe = intel_crtc->pipe;
3213 intel_fb = to_intel_framebuffer(crtc->fb);
3214 intel_mark_busy(dev, intel_fb->obj);
3218 temp |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
3222 temp |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
3226 temp |= x << CURSOR_X_SHIFT;
3227 temp |= y << CURSOR_Y_SHIFT;
3229 adder = intel_crtc->cursor_addr;
3230 I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
3231 I915_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
3236 /** Sets the color ramps on behalf of RandR */
3237 void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
3238 u16 blue, int regno)
3240 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3242 intel_crtc->lut_r[regno] = red >> 8;
3243 intel_crtc->lut_g[regno] = green >> 8;
3244 intel_crtc->lut_b[regno] = blue >> 8;
3247 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
3248 u16 *blue, uint32_t size)
3250 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3256 for (i = 0; i < 256; i++) {
3257 intel_crtc->lut_r[i] = red[i] >> 8;
3258 intel_crtc->lut_g[i] = green[i] >> 8;
3259 intel_crtc->lut_b[i] = blue[i] >> 8;
3262 intel_crtc_load_lut(crtc);
3266 * Get a pipe with a simple mode set on it for doing load-based monitor
3269 * It will be up to the load-detect code to adjust the pipe as appropriate for
3270 * its requirements. The pipe will be connected to no other outputs.
3272 * Currently this code will only succeed if there is a pipe with no outputs
3273 * configured for it. In the future, it could choose to temporarily disable
3274 * some outputs to free up a pipe for its use.
3276 * \return crtc, or NULL if no pipes are available.
3279 /* VESA 640x480x72Hz mode to set on the pipe */
3280 static struct drm_display_mode load_detect_mode = {
3281 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
3282 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
3285 struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
3286 struct drm_display_mode *mode,
3289 struct intel_crtc *intel_crtc;
3290 struct drm_crtc *possible_crtc;
3291 struct drm_crtc *supported_crtc =NULL;
3292 struct drm_encoder *encoder = &intel_output->enc;
3293 struct drm_crtc *crtc = NULL;
3294 struct drm_device *dev = encoder->dev;
3295 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
3296 struct drm_crtc_helper_funcs *crtc_funcs;
3300 * Algorithm gets a little messy:
3301 * - if the connector already has an assigned crtc, use it (but make
3302 * sure it's on first)
3303 * - try to find the first unused crtc that can drive this connector,
3304 * and use that if we find one
3305 * - if there are no unused crtcs available, try to use the first
3306 * one we found that supports the connector
3309 /* See if we already have a CRTC for this connector */
3310 if (encoder->crtc) {
3311 crtc = encoder->crtc;
3312 /* Make sure the crtc and connector are running */
3313 intel_crtc = to_intel_crtc(crtc);
3314 *dpms_mode = intel_crtc->dpms_mode;
3315 if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
3316 crtc_funcs = crtc->helper_private;
3317 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
3318 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
3323 /* Find an unused one (if possible) */
3324 list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
3326 if (!(encoder->possible_crtcs & (1 << i)))
3328 if (!possible_crtc->enabled) {
3329 crtc = possible_crtc;
3332 if (!supported_crtc)
3333 supported_crtc = possible_crtc;
3337 * If we didn't find an unused CRTC, don't use any.
3343 encoder->crtc = crtc;
3344 intel_output->base.encoder = encoder;
3345 intel_output->load_detect_temp = true;
3347 intel_crtc = to_intel_crtc(crtc);
3348 *dpms_mode = intel_crtc->dpms_mode;
3350 if (!crtc->enabled) {
3352 mode = &load_detect_mode;
3353 drm_crtc_helper_set_mode(crtc, mode, 0, 0, crtc->fb);
3355 if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
3356 crtc_funcs = crtc->helper_private;
3357 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
3360 /* Add this connector to the crtc */
3361 encoder_funcs->mode_set(encoder, &crtc->mode, &crtc->mode);
3362 encoder_funcs->commit(encoder);
3364 /* let the connector get through one full cycle before testing */
3365 intel_wait_for_vblank(dev);
3370 void intel_release_load_detect_pipe(struct intel_output *intel_output, int dpms_mode)
3372 struct drm_encoder *encoder = &intel_output->enc;
3373 struct drm_device *dev = encoder->dev;
3374 struct drm_crtc *crtc = encoder->crtc;
3375 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
3376 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
3378 if (intel_output->load_detect_temp) {
3379 encoder->crtc = NULL;
3380 intel_output->base.encoder = NULL;
3381 intel_output->load_detect_temp = false;
3382 crtc->enabled = drm_helper_crtc_in_use(crtc);
3383 drm_helper_disable_unused_functions(dev);
3386 /* Switch crtc and output back off if necessary */
3387 if (crtc->enabled && dpms_mode != DRM_MODE_DPMS_ON) {
3388 if (encoder->crtc == crtc)
3389 encoder_funcs->dpms(encoder, dpms_mode);
3390 crtc_funcs->dpms(crtc, dpms_mode);
3394 /* Returns the clock of the currently programmed mode of the given pipe. */
3395 static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
3397 struct drm_i915_private *dev_priv = dev->dev_private;
3398 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3399 int pipe = intel_crtc->pipe;
3400 u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B);
3402 intel_clock_t clock;
3404 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
3405 fp = I915_READ((pipe == 0) ? FPA0 : FPB0);
3407 fp = I915_READ((pipe == 0) ? FPA1 : FPB1);
3409 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
3411 clock.n = ffs((fp & FP_N_IGD_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
3412 clock.m2 = (fp & FP_M2_IGD_DIV_MASK) >> FP_M2_DIV_SHIFT;
3414 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
3415 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
3420 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_IGD) >>
3421 DPLL_FPA01_P1_POST_DIV_SHIFT_IGD);
3423 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
3424 DPLL_FPA01_P1_POST_DIV_SHIFT);
3426 switch (dpll & DPLL_MODE_MASK) {
3427 case DPLLB_MODE_DAC_SERIAL:
3428 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
3431 case DPLLB_MODE_LVDS:
3432 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
3436 DRM_DEBUG("Unknown DPLL mode %08x in programmed "
3437 "mode\n", (int)(dpll & DPLL_MODE_MASK));
3441 /* XXX: Handle the 100Mhz refclk */
3442 intel_clock(dev, 96000, &clock);
3444 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
3447 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
3448 DPLL_FPA01_P1_POST_DIV_SHIFT);
3451 if ((dpll & PLL_REF_INPUT_MASK) ==
3452 PLLB_REF_INPUT_SPREADSPECTRUMIN) {
3453 /* XXX: might not be 66MHz */
3454 intel_clock(dev, 66000, &clock);
3456 intel_clock(dev, 48000, &clock);
3458 if (dpll & PLL_P1_DIVIDE_BY_TWO)
3461 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
3462 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
3464 if (dpll & PLL_P2_DIVIDE_BY_4)
3469 intel_clock(dev, 48000, &clock);
3473 /* XXX: It would be nice to validate the clocks, but we can't reuse
3474 * i830PllIsValid() because it relies on the xf86_config connector
3475 * configuration being accurate, which it isn't necessarily.
3481 /** Returns the currently programmed mode of the given pipe. */
3482 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
3483 struct drm_crtc *crtc)
3485 struct drm_i915_private *dev_priv = dev->dev_private;
3486 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3487 int pipe = intel_crtc->pipe;
3488 struct drm_display_mode *mode;
3489 int htot = I915_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
3490 int hsync = I915_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
3491 int vtot = I915_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
3492 int vsync = I915_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
3494 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
3498 mode->clock = intel_crtc_clock_get(dev, crtc);
3499 mode->hdisplay = (htot & 0xffff) + 1;
3500 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
3501 mode->hsync_start = (hsync & 0xffff) + 1;
3502 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
3503 mode->vdisplay = (vtot & 0xffff) + 1;
3504 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
3505 mode->vsync_start = (vsync & 0xffff) + 1;
3506 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
3508 drm_mode_set_name(mode);
3509 drm_mode_set_crtcinfo(mode, 0);
3514 #define GPU_IDLE_TIMEOUT 500 /* ms */
3516 /* When this timer fires, we've been idle for awhile */
3517 static void intel_gpu_idle_timer(unsigned long arg)
3519 struct drm_device *dev = (struct drm_device *)arg;
3520 drm_i915_private_t *dev_priv = dev->dev_private;
3522 DRM_DEBUG("idle timer fired, downclocking\n");
3524 dev_priv->busy = false;
3526 queue_work(dev_priv->wq, &dev_priv->idle_work);
3529 void intel_increase_renderclock(struct drm_device *dev, bool schedule)
3531 drm_i915_private_t *dev_priv = dev->dev_private;
3536 if (!dev_priv->render_reclock_avail) {
3537 DRM_DEBUG("not reclocking render clock\n");
3541 /* Restore render clock frequency to original value */
3542 if (IS_G4X(dev) || IS_I9XX(dev))
3543 pci_write_config_word(dev->pdev, GCFGC, dev_priv->orig_clock);
3544 else if (IS_I85X(dev))
3545 pci_write_config_word(dev->pdev, HPLLCC, dev_priv->orig_clock);
3546 DRM_DEBUG("increasing render clock frequency\n");
3548 /* Schedule downclock */
3550 mod_timer(&dev_priv->idle_timer, jiffies +
3551 msecs_to_jiffies(GPU_IDLE_TIMEOUT));
3554 void intel_decrease_renderclock(struct drm_device *dev)
3556 drm_i915_private_t *dev_priv = dev->dev_private;
3561 if (!dev_priv->render_reclock_avail) {
3562 DRM_DEBUG("not reclocking render clock\n");
3569 /* Adjust render clock... */
3570 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
3572 /* Down to minimum... */
3573 gcfgc &= ~GM45_GC_RENDER_CLOCK_MASK;
3574 gcfgc |= GM45_GC_RENDER_CLOCK_266_MHZ;
3576 pci_write_config_word(dev->pdev, GCFGC, gcfgc);
3577 } else if (IS_I965G(dev)) {
3580 /* Adjust render clock... */
3581 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
3583 /* Down to minimum... */
3584 gcfgc &= ~I965_GC_RENDER_CLOCK_MASK;
3585 gcfgc |= I965_GC_RENDER_CLOCK_267_MHZ;
3587 pci_write_config_word(dev->pdev, GCFGC, gcfgc);
3588 } else if (IS_I945G(dev) || IS_I945GM(dev)) {
3591 /* Adjust render clock... */
3592 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
3594 /* Down to minimum... */
3595 gcfgc &= ~I945_GC_RENDER_CLOCK_MASK;
3596 gcfgc |= I945_GC_RENDER_CLOCK_166_MHZ;
3598 pci_write_config_word(dev->pdev, GCFGC, gcfgc);
3599 } else if (IS_I915G(dev)) {
3602 /* Adjust render clock... */
3603 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
3605 /* Down to minimum... */
3606 gcfgc &= ~I915_GC_RENDER_CLOCK_MASK;
3607 gcfgc |= I915_GC_RENDER_CLOCK_166_MHZ;
3609 pci_write_config_word(dev->pdev, GCFGC, gcfgc);
3610 } else if (IS_I85X(dev)) {
3613 /* Adjust render clock... */
3614 pci_read_config_word(dev->pdev, HPLLCC, &hpllcc);
3616 /* Up to maximum... */
3617 hpllcc &= ~GC_CLOCK_CONTROL_MASK;
3618 hpllcc |= GC_CLOCK_133_200;
3620 pci_write_config_word(dev->pdev, HPLLCC, hpllcc);
3622 DRM_DEBUG("decreasing render clock frequency\n");
3625 /* Note that no increase function is needed for this - increase_renderclock()
3626 * will also rewrite these bits
3628 void intel_decrease_displayclock(struct drm_device *dev)
3633 if (IS_I945G(dev) || IS_I945GM(dev) || IS_I915G(dev) ||
3637 /* Adjust render clock... */
3638 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
3640 /* Down to minimum... */
3644 pci_write_config_word(dev->pdev, GCFGC, gcfgc);
3648 #define CRTC_IDLE_TIMEOUT 1000 /* ms */
3650 static void intel_crtc_idle_timer(unsigned long arg)
3652 struct intel_crtc *intel_crtc = (struct intel_crtc *)arg;
3653 struct drm_crtc *crtc = &intel_crtc->base;
3654 drm_i915_private_t *dev_priv = crtc->dev->dev_private;
3656 DRM_DEBUG("idle timer fired, downclocking\n");
3658 intel_crtc->busy = false;
3660 queue_work(dev_priv->wq, &dev_priv->idle_work);
3663 static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule)
3665 struct drm_device *dev = crtc->dev;
3666 drm_i915_private_t *dev_priv = dev->dev_private;
3667 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3668 int pipe = intel_crtc->pipe;
3669 int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
3670 int dpll = I915_READ(dpll_reg);
3675 if (!dev_priv->lvds_downclock_avail)
3678 if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
3679 DRM_DEBUG("upclocking LVDS\n");
3681 /* Unlock panel regs */
3682 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16));
3684 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
3685 I915_WRITE(dpll_reg, dpll);
3686 dpll = I915_READ(dpll_reg);
3687 intel_wait_for_vblank(dev);
3688 dpll = I915_READ(dpll_reg);
3689 if (dpll & DISPLAY_RATE_SELECT_FPA1)
3690 DRM_DEBUG("failed to upclock LVDS!\n");
3692 /* ...and lock them again */
3693 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3);
3696 /* Schedule downclock */
3698 mod_timer(&intel_crtc->idle_timer, jiffies +
3699 msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
3702 static void intel_decrease_pllclock(struct drm_crtc *crtc)
3704 struct drm_device *dev = crtc->dev;
3705 drm_i915_private_t *dev_priv = dev->dev_private;
3706 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3707 int pipe = intel_crtc->pipe;
3708 int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
3709 int dpll = I915_READ(dpll_reg);
3714 if (!dev_priv->lvds_downclock_avail)
3718 * Since this is called by a timer, we should never get here in
3721 if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
3722 DRM_DEBUG("downclocking LVDS\n");
3724 /* Unlock panel regs */
3725 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16));
3727 dpll |= DISPLAY_RATE_SELECT_FPA1;
3728 I915_WRITE(dpll_reg, dpll);
3729 dpll = I915_READ(dpll_reg);
3730 intel_wait_for_vblank(dev);
3731 dpll = I915_READ(dpll_reg);
3732 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
3733 DRM_DEBUG("failed to downclock LVDS!\n");
3735 /* ...and lock them again */
3736 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3);
3742 * intel_idle_update - adjust clocks for idleness
3743 * @work: work struct
3745 * Either the GPU or display (or both) went idle. Check the busy status
3746 * here and adjust the CRTC and GPU clocks as necessary.
3748 static void intel_idle_update(struct work_struct *work)
3750 drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
3752 struct drm_device *dev = dev_priv->dev;
3753 struct drm_crtc *crtc;
3754 struct intel_crtc *intel_crtc;
3756 if (!i915_powersave)
3759 mutex_lock(&dev->struct_mutex);
3761 /* GPU isn't processing, downclock it. */
3762 if (!dev_priv->busy) {
3763 intel_decrease_renderclock(dev);
3764 intel_decrease_displayclock(dev);
3767 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
3768 /* Skip inactive CRTCs */
3772 intel_crtc = to_intel_crtc(crtc);
3773 if (!intel_crtc->busy)
3774 intel_decrease_pllclock(crtc);
3777 mutex_unlock(&dev->struct_mutex);
3781 * intel_mark_busy - mark the GPU and possibly the display busy
3783 * @obj: object we're operating on
3785 * Callers can use this function to indicate that the GPU is busy processing
3786 * commands. If @obj matches one of the CRTC objects (i.e. it's a scanout
3787 * buffer), we'll also mark the display as busy, so we know to increase its
3790 void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj)
3792 drm_i915_private_t *dev_priv = dev->dev_private;
3793 struct drm_crtc *crtc = NULL;
3794 struct intel_framebuffer *intel_fb;
3795 struct intel_crtc *intel_crtc;
3797 if (!drm_core_check_feature(dev, DRIVER_MODESET))
3800 dev_priv->busy = true;
3801 intel_increase_renderclock(dev, true);
3803 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
3807 intel_crtc = to_intel_crtc(crtc);
3808 intel_fb = to_intel_framebuffer(crtc->fb);
3809 if (intel_fb->obj == obj) {
3810 if (!intel_crtc->busy) {
3811 /* Non-busy -> busy, upclock */
3812 intel_increase_pllclock(crtc, true);
3813 intel_crtc->busy = true;
3815 /* Busy -> busy, put off timer */
3816 mod_timer(&intel_crtc->idle_timer, jiffies +
3817 msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
3823 static void intel_crtc_destroy(struct drm_crtc *crtc)
3825 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3827 drm_crtc_cleanup(crtc);
3831 static const struct drm_crtc_helper_funcs intel_helper_funcs = {
3832 .dpms = intel_crtc_dpms,
3833 .mode_fixup = intel_crtc_mode_fixup,
3834 .mode_set = intel_crtc_mode_set,
3835 .mode_set_base = intel_pipe_set_base,
3836 .prepare = intel_crtc_prepare,
3837 .commit = intel_crtc_commit,
3840 static const struct drm_crtc_funcs intel_crtc_funcs = {
3841 .cursor_set = intel_crtc_cursor_set,
3842 .cursor_move = intel_crtc_cursor_move,
3843 .gamma_set = intel_crtc_gamma_set,
3844 .set_config = drm_crtc_helper_set_config,
3845 .destroy = intel_crtc_destroy,
3849 static void intel_crtc_init(struct drm_device *dev, int pipe)
3851 struct intel_crtc *intel_crtc;
3854 intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
3855 if (intel_crtc == NULL)
3858 drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
3860 drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
3861 intel_crtc->pipe = pipe;
3862 intel_crtc->plane = pipe;
3863 for (i = 0; i < 256; i++) {
3864 intel_crtc->lut_r[i] = i;
3865 intel_crtc->lut_g[i] = i;
3866 intel_crtc->lut_b[i] = i;
3869 /* Swap pipes & planes for FBC on pre-965 */
3870 intel_crtc->pipe = pipe;
3871 intel_crtc->plane = pipe;
3872 if (IS_MOBILE(dev) && (IS_I9XX(dev) && !IS_I965G(dev))) {
3873 DRM_DEBUG("swapping pipes & planes for FBC\n");
3874 intel_crtc->plane = ((pipe == 0) ? 1 : 0);
3877 intel_crtc->cursor_addr = 0;
3878 intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
3879 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
3881 intel_crtc->busy = false;
3883 setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
3884 (unsigned long)intel_crtc);
3887 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
3888 struct drm_file *file_priv)
3890 drm_i915_private_t *dev_priv = dev->dev_private;
3891 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
3892 struct drm_mode_object *drmmode_obj;
3893 struct intel_crtc *crtc;
3896 DRM_ERROR("called with no initialization\n");
3900 drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
3901 DRM_MODE_OBJECT_CRTC);
3904 DRM_ERROR("no such CRTC id\n");
3908 crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
3909 pipe_from_crtc_id->pipe = crtc->pipe;
3914 struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
3916 struct drm_crtc *crtc = NULL;
3918 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
3919 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3920 if (intel_crtc->pipe == pipe)
3926 static int intel_connector_clones(struct drm_device *dev, int type_mask)
3929 struct drm_connector *connector;
3932 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
3933 struct intel_output *intel_output = to_intel_output(connector);
3934 if (type_mask & intel_output->clone_mask)
3935 index_mask |= (1 << entry);
3942 static void intel_setup_outputs(struct drm_device *dev)
3944 struct drm_i915_private *dev_priv = dev->dev_private;
3945 struct drm_connector *connector;
3947 intel_crt_init(dev);
3949 /* Set up integrated LVDS */
3950 if (IS_MOBILE(dev) && !IS_I830(dev))
3951 intel_lvds_init(dev);
3953 if (IS_IGDNG(dev)) {
3956 if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
3957 intel_dp_init(dev, DP_A);
3959 if (I915_READ(HDMIB) & PORT_DETECTED) {
3961 /* found = intel_sdvo_init(dev, HDMIB); */
3964 intel_hdmi_init(dev, HDMIB);
3965 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
3966 intel_dp_init(dev, PCH_DP_B);
3969 if (I915_READ(HDMIC) & PORT_DETECTED)
3970 intel_hdmi_init(dev, HDMIC);
3972 if (I915_READ(HDMID) & PORT_DETECTED)
3973 intel_hdmi_init(dev, HDMID);
3975 if (I915_READ(PCH_DP_C) & DP_DETECTED)
3976 intel_dp_init(dev, PCH_DP_C);
3978 if (I915_READ(PCH_DP_D) & DP_DETECTED)
3979 intel_dp_init(dev, PCH_DP_D);
3981 } else if (IS_I9XX(dev)) {
3984 if (I915_READ(SDVOB) & SDVO_DETECTED) {
3985 found = intel_sdvo_init(dev, SDVOB);
3986 if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
3987 intel_hdmi_init(dev, SDVOB);
3989 if (!found && SUPPORTS_INTEGRATED_DP(dev))
3990 intel_dp_init(dev, DP_B);
3993 /* Before G4X SDVOC doesn't have its own detect register */
3995 if (I915_READ(SDVOB) & SDVO_DETECTED)
3996 found = intel_sdvo_init(dev, SDVOC);
3998 if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
4000 if (SUPPORTS_INTEGRATED_HDMI(dev))
4001 intel_hdmi_init(dev, SDVOC);
4002 if (SUPPORTS_INTEGRATED_DP(dev))
4003 intel_dp_init(dev, DP_C);
4006 if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
4007 intel_dp_init(dev, DP_D);
4009 intel_dvo_init(dev);
4011 if (IS_I9XX(dev) && IS_MOBILE(dev) && !IS_IGDNG(dev))
4014 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
4015 struct intel_output *intel_output = to_intel_output(connector);
4016 struct drm_encoder *encoder = &intel_output->enc;
4018 encoder->possible_crtcs = intel_output->crtc_mask;
4019 encoder->possible_clones = intel_connector_clones(dev,
4020 intel_output->clone_mask);
4024 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
4026 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
4027 struct drm_device *dev = fb->dev;
4030 intelfb_remove(dev, fb);
4032 drm_framebuffer_cleanup(fb);
4033 mutex_lock(&dev->struct_mutex);
4034 drm_gem_object_unreference(intel_fb->obj);
4035 mutex_unlock(&dev->struct_mutex);
4040 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
4041 struct drm_file *file_priv,
4042 unsigned int *handle)
4044 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
4045 struct drm_gem_object *object = intel_fb->obj;
4047 return drm_gem_handle_create(file_priv, object, handle);
4050 static const struct drm_framebuffer_funcs intel_fb_funcs = {
4051 .destroy = intel_user_framebuffer_destroy,
4052 .create_handle = intel_user_framebuffer_create_handle,
4055 int intel_framebuffer_create(struct drm_device *dev,
4056 struct drm_mode_fb_cmd *mode_cmd,
4057 struct drm_framebuffer **fb,
4058 struct drm_gem_object *obj)
4060 struct intel_framebuffer *intel_fb;
4063 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
4067 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
4069 DRM_ERROR("framebuffer init failed %d\n", ret);
4073 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
4075 intel_fb->obj = obj;
4077 *fb = &intel_fb->base;
4083 static struct drm_framebuffer *
4084 intel_user_framebuffer_create(struct drm_device *dev,
4085 struct drm_file *filp,
4086 struct drm_mode_fb_cmd *mode_cmd)
4088 struct drm_gem_object *obj;
4089 struct drm_framebuffer *fb;
4092 obj = drm_gem_object_lookup(dev, filp, mode_cmd->handle);
4096 ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj);
4098 mutex_lock(&dev->struct_mutex);
4099 drm_gem_object_unreference(obj);
4100 mutex_unlock(&dev->struct_mutex);
4107 static const struct drm_mode_config_funcs intel_mode_funcs = {
4108 .fb_create = intel_user_framebuffer_create,
4109 .fb_changed = intelfb_probe,
4112 void intel_init_clock_gating(struct drm_device *dev)
4114 struct drm_i915_private *dev_priv = dev->dev_private;
4117 * Disable clock gating reported to work incorrectly according to the
4118 * specs, but enable as much else as we can.
4121 uint32_t dspclk_gate;
4122 I915_WRITE(RENCLK_GATE_D1, 0);
4123 I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
4124 GS_UNIT_CLOCK_GATE_DISABLE |
4125 CL_UNIT_CLOCK_GATE_DISABLE);
4126 I915_WRITE(RAMCLK_GATE_D, 0);
4127 dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
4128 OVRUNIT_CLOCK_GATE_DISABLE |
4129 OVCUNIT_CLOCK_GATE_DISABLE;
4131 dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
4132 I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
4133 } else if (IS_I965GM(dev)) {
4134 I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
4135 I915_WRITE(RENCLK_GATE_D2, 0);
4136 I915_WRITE(DSPCLK_GATE_D, 0);
4137 I915_WRITE(RAMCLK_GATE_D, 0);
4138 I915_WRITE16(DEUC, 0);
4139 } else if (IS_I965G(dev)) {
4140 I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
4141 I965_RCC_CLOCK_GATE_DISABLE |
4142 I965_RCPB_CLOCK_GATE_DISABLE |
4143 I965_ISC_CLOCK_GATE_DISABLE |
4144 I965_FBC_CLOCK_GATE_DISABLE);
4145 I915_WRITE(RENCLK_GATE_D2, 0);
4146 } else if (IS_I9XX(dev)) {
4147 u32 dstate = I915_READ(D_STATE);
4149 dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
4150 DSTATE_DOT_CLOCK_GATING;
4151 I915_WRITE(D_STATE, dstate);
4152 } else if (IS_I855(dev) || IS_I865G(dev)) {
4153 I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
4154 } else if (IS_I830(dev)) {
4155 I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
4159 /* Set up chip specific display functions */
4160 static void intel_init_display(struct drm_device *dev)
4162 struct drm_i915_private *dev_priv = dev->dev_private;
4164 /* We always want a DPMS function */
4166 dev_priv->display.dpms = igdng_crtc_dpms;
4168 dev_priv->display.dpms = i9xx_crtc_dpms;
4170 /* Only mobile has FBC, leave pointers NULL for other chips */
4171 if (IS_MOBILE(dev)) {
4173 dev_priv->display.fbc_enabled = g4x_fbc_enabled;
4174 dev_priv->display.enable_fbc = g4x_enable_fbc;
4175 dev_priv->display.disable_fbc = g4x_disable_fbc;
4176 } else if (IS_I965GM(dev) || IS_I945GM(dev) || IS_I915GM(dev)) {
4177 dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
4178 dev_priv->display.enable_fbc = i8xx_enable_fbc;
4179 dev_priv->display.disable_fbc = i8xx_disable_fbc;
4181 /* 855GM needs testing */
4184 /* Returns the core display clock speed */
4186 dev_priv->display.get_display_clock_speed =
4187 i945_get_display_clock_speed;
4188 else if (IS_I915G(dev))
4189 dev_priv->display.get_display_clock_speed =
4190 i915_get_display_clock_speed;
4191 else if (IS_I945GM(dev) || IS_845G(dev) || IS_IGDGM(dev))
4192 dev_priv->display.get_display_clock_speed =
4193 i9xx_misc_get_display_clock_speed;
4194 else if (IS_I915GM(dev))
4195 dev_priv->display.get_display_clock_speed =
4196 i915gm_get_display_clock_speed;
4197 else if (IS_I865G(dev))
4198 dev_priv->display.get_display_clock_speed =
4199 i865_get_display_clock_speed;
4200 else if (IS_I855(dev))
4201 dev_priv->display.get_display_clock_speed =
4202 i855_get_display_clock_speed;
4204 dev_priv->display.get_display_clock_speed =
4205 i830_get_display_clock_speed;
4207 /* For FIFO watermark updates */
4209 dev_priv->display.update_wm = g4x_update_wm;
4210 else if (IS_I965G(dev))
4211 dev_priv->display.update_wm = i965_update_wm;
4212 else if (IS_I9XX(dev) || IS_MOBILE(dev)) {
4213 dev_priv->display.update_wm = i9xx_update_wm;
4214 dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
4217 dev_priv->display.get_fifo_size = i85x_get_fifo_size;
4218 else if (IS_845G(dev))
4219 dev_priv->display.get_fifo_size = i845_get_fifo_size;
4221 dev_priv->display.get_fifo_size = i830_get_fifo_size;
4222 dev_priv->display.update_wm = i830_update_wm;
4226 void intel_modeset_init(struct drm_device *dev)
4228 struct drm_i915_private *dev_priv = dev->dev_private;
4232 drm_mode_config_init(dev);
4234 dev->mode_config.min_width = 0;
4235 dev->mode_config.min_height = 0;
4237 dev->mode_config.funcs = (void *)&intel_mode_funcs;
4239 intel_init_display(dev);
4241 if (IS_I965G(dev)) {
4242 dev->mode_config.max_width = 8192;
4243 dev->mode_config.max_height = 8192;
4244 } else if (IS_I9XX(dev)) {
4245 dev->mode_config.max_width = 4096;
4246 dev->mode_config.max_height = 4096;
4248 dev->mode_config.max_width = 2048;
4249 dev->mode_config.max_height = 2048;
4252 /* set memory base */
4254 dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2);
4256 dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
4258 if (IS_MOBILE(dev) || IS_I9XX(dev))
4262 DRM_DEBUG("%d display pipe%s available.\n",
4263 num_pipe, num_pipe > 1 ? "s" : "");
4266 pci_read_config_word(dev->pdev, HPLLCC, &dev_priv->orig_clock);
4267 else if (IS_I9XX(dev) || IS_G4X(dev))
4268 pci_read_config_word(dev->pdev, GCFGC, &dev_priv->orig_clock);
4270 for (i = 0; i < num_pipe; i++) {
4271 intel_crtc_init(dev, i);
4274 intel_setup_outputs(dev);
4276 intel_init_clock_gating(dev);
4278 INIT_WORK(&dev_priv->idle_work, intel_idle_update);
4279 setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
4280 (unsigned long)dev);
4283 void intel_modeset_cleanup(struct drm_device *dev)
4285 struct drm_i915_private *dev_priv = dev->dev_private;
4286 struct drm_crtc *crtc;
4287 struct intel_crtc *intel_crtc;
4289 mutex_lock(&dev->struct_mutex);
4291 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
4292 /* Skip inactive CRTCs */
4296 intel_crtc = to_intel_crtc(crtc);
4297 intel_increase_pllclock(crtc, false);
4298 del_timer_sync(&intel_crtc->idle_timer);
4301 intel_increase_renderclock(dev, false);
4302 del_timer_sync(&dev_priv->idle_timer);
4304 mutex_unlock(&dev->struct_mutex);
4306 if (dev_priv->display.disable_fbc)
4307 dev_priv->display.disable_fbc(dev);
4309 drm_mode_config_cleanup(dev);
4313 /* current intel driver doesn't take advantage of encoders
4314 always give back the encoder for the connector
4316 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
4318 struct intel_output *intel_output = to_intel_output(connector);
4320 return &intel_output->enc;