Merge branches 'clk-samsung', 'clk-formatting', 'clk-si5341' and 'clk-socfpga' into...

[linux-2.6-microblaze.git] / drivers / gpu / drm / i915 / i915_perf.c

/*
 * Copyright © 2015-2016 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 *
 * Authors:
 *   Robert Bragg <robert@sixbynine.org>
 */


/**
 * DOC: i915 Perf Overview
 *
 * Gen graphics supports a large number of performance counters that can help
 * driver and application developers understand and optimize their use of the
 * GPU.
 *
 * This i915 perf interface enables userspace to configure and open a file
 * descriptor representing a stream of GPU metrics which can then be read() as
 * a stream of sample records.
 *
 * The interface is particularly suited to exposing buffered metrics that are
 * captured by DMA from the GPU, unsynchronized with and unrelated to the CPU.
 *
 * Streams representing a single context are accessible to applications with a
 * corresponding drm file descriptor, such that OpenGL can use the interface
 * without special privileges. Access to system-wide metrics requires root
 * privileges by default, unless changed via the dev.i915.perf_event_paranoid
 * sysctl option.
 *
 */

/**
 * DOC: i915 Perf History and Comparison with Core Perf
 *
 * The interface was initially inspired by the core Perf infrastructure but
 * some notable differences are:
 *
 * i915 perf file descriptors represent a "stream" instead of an "event"; where
 * a perf event primarily corresponds to a single 64bit value, while a stream
 * might sample sets of tightly-coupled counters, depending on the
 * configuration.  For example the Gen OA unit isn't designed to support
 * orthogonal configurations of individual counters; it's configured for a set
 * of related counters. Samples for an i915 perf stream capturing OA metrics
 * will include a set of counter values packed in a compact HW specific format.
 * The OA unit supports a number of different packing formats which can be
 * selected by the user opening the stream. Perf has support for grouping
 * events, but each event in the group is configured, validated and
 * authenticated individually with separate system calls.
 *
 * i915 perf stream configurations are provided as an array of u64 (key,value)
 * pairs, instead of a fixed struct with multiple miscellaneous config members,
 * interleaved with event-type specific members.
 *
 * i915 perf doesn't support exposing metrics via an mmap'd circular buffer.
 * The supported metrics are being written to memory by the GPU unsynchronized
 * with the CPU, using HW specific packing formats for counter sets. Sometimes
 * the constraints on HW configuration require reports to be filtered before it
 * would be acceptable to expose them to unprivileged applications - to hide
 * the metrics of other processes/contexts. For these use cases a read() based
 * interface is a good fit, and provides an opportunity to filter data as it
 * gets copied from the GPU mapped buffers to userspace buffers.
 *
 *
 * Issues hit with first prototype based on Core Perf
 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 *
 * The first prototype of this driver was based on the core perf
 * infrastructure, and while we did make that mostly work, with some changes to
 * perf, we found we were breaking or working around too many assumptions baked
 * into perf's currently cpu centric design.
 *
 * In the end we didn't see a clear benefit to making perf's implementation and
 * interface more complex by changing design assumptions while we knew we still
 * wouldn't be able to use any existing perf based userspace tools.
 *
 * Also considering the Gen specific nature of the Observability hardware and
 * how userspace will sometimes need to combine i915 perf OA metrics with
 * side-band OA data captured via MI_REPORT_PERF_COUNT commands; we're
 * expecting the interface to be used by a platform specific userspace such as
 * OpenGL or tools. This is to say; we aren't inherently missing out on having
 * a standard vendor/architecture agnostic interface by not using perf.
 *
 *
 * For posterity, in case we might re-visit trying to adapt core perf to be
 * better suited to exposing i915 metrics these were the main pain points we
 * hit:
 *
 * - The perf based OA PMU driver broke some significant design assumptions:
 *
 *   Existing perf pmus are used for profiling work on a cpu and we were
 *   introducing the idea of _IS_DEVICE pmus with different security
 *   implications, the need to fake cpu-related data (such as user/kernel
 *   registers) to fit with perf's current design, and adding _DEVICE records
 *   as a way to forward device-specific status records.
 *
 *   The OA unit writes reports of counters into a circular buffer, without
 *   involvement from the CPU, making our PMU driver the first of a kind.
 *
 *   Given the way we were periodically forward data from the GPU-mapped, OA
 *   buffer to perf's buffer, those bursts of sample writes looked to perf like
 *   we were sampling too fast and so we had to subvert its throttling checks.
 *
 *   Perf supports groups of counters and allows those to be read via
 *   transactions internally but transactions currently seem designed to be
 *   explicitly initiated from the cpu (say in response to a userspace read())
 *   and while we could pull a report out of the OA buffer we can't
 *   trigger a report from the cpu on demand.
 *
 *   Related to being report based; the OA counters are configured in HW as a
 *   set while perf generally expects counter configurations to be orthogonal.
 *   Although counters can be associated with a group leader as they are
 *   opened, there's no clear precedent for being able to provide group-wide
 *   configuration attributes (for example we want to let userspace choose the
 *   OA unit report format used to capture all counters in a set, or specify a
 *   GPU context to filter metrics on). We avoided using perf's grouping
 *   feature and forwarded OA reports to userspace via perf's 'raw' sample
 *   field. This suited our userspace well considering how coupled the counters
 *   are when dealing with normalizing. It would be inconvenient to split
 *   counters up into separate events, only to require userspace to recombine
 *   them. For Mesa it's also convenient to be forwarded raw, periodic reports
 *   for combining with the side-band raw reports it captures using
 *   MI_REPORT_PERF_COUNT commands.
 *
 *   - As a side note on perf's grouping feature; there was also some concern
 *     that using PERF_FORMAT_GROUP as a way to pack together counter values
 *     would quite drastically inflate our sample sizes, which would likely
 *     lower the effective sampling resolutions we could use when the available
 *     memory bandwidth is limited.
 *
 *     With the OA unit's report formats, counters are packed together as 32
 *     or 40bit values, with the largest report size being 256 bytes.
 *
 *     PERF_FORMAT_GROUP values are 64bit, but there doesn't appear to be a
 *     documented ordering to the values, implying PERF_FORMAT_ID must also be
 *     used to add a 64bit ID before each value; giving 16 bytes per counter.
 *
 *   Related to counter orthogonality; we can't time share the OA unit, while
 *   event scheduling is a central design idea within perf for allowing
 *   userspace to open + enable more events than can be configured in HW at any
 *   one time.  The OA unit is not designed to allow re-configuration while in
 *   use. We can't reconfigure the OA unit without losing internal OA unit
 *   state which we can't access explicitly to save and restore. Reconfiguring
 *   the OA unit is also relatively slow, involving ~100 register writes. From
 *   userspace Mesa also depends on a stable OA configuration when emitting
 *   MI_REPORT_PERF_COUNT commands and importantly the OA unit can't be
 *   disabled while there are outstanding MI_RPC commands lest we hang the
 *   command streamer.
 *
 *   The contents of sample records aren't extensible by device drivers (i.e.
 *   the sample_type bits). As an example; Sourab Gupta had been looking to
 *   attach GPU timestamps to our OA samples. We were shoehorning OA reports
 *   into sample records by using the 'raw' field, but it's tricky to pack more
 *   than one thing into this field because events/core.c currently only lets a
 *   pmu give a single raw data pointer plus len which will be copied into the
 *   ring buffer. To include more than the OA report we'd have to copy the
 *   report into an intermediate larger buffer. I'd been considering allowing a
 *   vector of data+len values to be specified for copying the raw data, but
 *   it felt like a kludge to being using the raw field for this purpose.
 *
 * - It felt like our perf based PMU was making some technical compromises
 *   just for the sake of using perf:
 *
 *   perf_event_open() requires events to either relate to a pid or a specific
 *   cpu core, while our device pmu related to neither.  Events opened with a
 *   pid will be automatically enabled/disabled according to the scheduling of
 *   that process - so not appropriate for us. When an event is related to a
 *   cpu id, perf ensures pmu methods will be invoked via an inter process
 *   interrupt on that core. To avoid invasive changes our userspace opened OA
 *   perf events for a specific cpu. This was workable but it meant the
 *   majority of the OA driver ran in atomic context, including all OA report
 *   forwarding, which wasn't really necessary in our case and seems to make
 *   our locking requirements somewhat complex as we handled the interaction
 *   with the rest of the i915 driver.
 */

#include <linux/anon_inodes.h>
#include <linux/sizes.h>
#include <linux/uuid.h>

#include "gem/i915_gem_context.h"
#include "gt/intel_engine_pm.h"
#include "gt/intel_engine_user.h"
#include "gt/intel_gt.h"
#include "gt/intel_lrc_reg.h"
#include "gt/intel_ring.h"

#include "i915_drv.h"
#include "i915_perf.h"
#include "oa/i915_oa_hsw.h"
#include "oa/i915_oa_bdw.h"
#include "oa/i915_oa_chv.h"
#include "oa/i915_oa_sklgt2.h"
#include "oa/i915_oa_sklgt3.h"
#include "oa/i915_oa_sklgt4.h"
#include "oa/i915_oa_bxt.h"
#include "oa/i915_oa_kblgt2.h"
#include "oa/i915_oa_kblgt3.h"
#include "oa/i915_oa_glk.h"
#include "oa/i915_oa_cflgt2.h"
#include "oa/i915_oa_cflgt3.h"
#include "oa/i915_oa_cnl.h"
#include "oa/i915_oa_icl.h"
#include "oa/i915_oa_tgl.h"

/* HW requires this to be a power of two, between 128k and 16M, though driver
 * is currently generally designed assuming the largest 16M size is used such
 * that the overflow cases are unlikely in normal operation.
 */
#define OA_BUFFER_SIZE          SZ_16M

#define OA_TAKEN(tail, head)    ((tail - head) & (OA_BUFFER_SIZE - 1))

/**
 * DOC: OA Tail Pointer Race
 *
 * There's a HW race condition between OA unit tail pointer register updates and
 * writes to memory whereby the tail pointer can sometimes get ahead of what's
 * been written out to the OA buffer so far (in terms of what's visible to the
 * CPU).
 *
 * Although this can be observed explicitly while copying reports to userspace
 * by checking for a zeroed report-id field in tail reports, we want to account
 * for this earlier, as part of the oa_buffer_check to avoid lots of redundant
 * read() attempts.
 *
 * In effect we define a tail pointer for reading that lags the real tail
 * pointer by at least %OA_TAIL_MARGIN_NSEC nanoseconds, which gives enough
 * time for the corresponding reports to become visible to the CPU.
 *
 * To manage this we actually track two tail pointers:
 *  1) An 'aging' tail with an associated timestamp that is tracked until we
 *     can trust the corresponding data is visible to the CPU; at which point
 *     it is considered 'aged'.
 *  2) An 'aged' tail that can be used for read()ing.
 *
 * The two separate pointers let us decouple read()s from tail pointer aging.
 *
 * The tail pointers are checked and updated at a limited rate within a hrtimer
 * callback (the same callback that is used for delivering EPOLLIN events)
 *
 * Initially the tails are marked invalid with %INVALID_TAIL_PTR which
 * indicates that an updated tail pointer is needed.
 *
 * Most of the implementation details for this workaround are in
 * oa_buffer_check_unlocked() and _append_oa_reports()
 *
 * Note for posterity: previously the driver used to define an effective tail
 * pointer that lagged the real pointer by a 'tail margin' measured in bytes
 * derived from %OA_TAIL_MARGIN_NSEC and the configured sampling frequency.
 * This was flawed considering that the OA unit may also automatically generate
 * non-periodic reports (such as on context switch) or the OA unit may be
 * enabled without any periodic sampling.
 */
#define OA_TAIL_MARGIN_NSEC     100000ULL
#define INVALID_TAIL_PTR        0xffffffff

/* frequency for checking whether the OA unit has written new reports to the
 * circular OA buffer...
 */
#define POLL_FREQUENCY 200
#define POLL_PERIOD (NSEC_PER_SEC / POLL_FREQUENCY)

/* for sysctl proc_dointvec_minmax of dev.i915.perf_stream_paranoid */
static u32 i915_perf_stream_paranoid = true;

/* The maximum exponent the hardware accepts is 63 (essentially it selects one
 * of the 64bit timestamp bits to trigger reports from) but there's currently
 * no known use case for sampling as infrequently as once per 47 thousand years.
 *
 * Since the timestamps included in OA reports are only 32bits it seems
 * reasonable to limit the OA exponent where it's still possible to account for
 * overflow in OA report timestamps.
 */
#define OA_EXPONENT_MAX 31

#define INVALID_CTX_ID 0xffffffff

/* On Gen8+ automatically triggered OA reports include a 'reason' field... */
#define OAREPORT_REASON_MASK           0x3f
#define OAREPORT_REASON_MASK_EXTENDED  0x7f
#define OAREPORT_REASON_SHIFT          19
#define OAREPORT_REASON_TIMER          (1<<0)
#define OAREPORT_REASON_CTX_SWITCH     (1<<3)
#define OAREPORT_REASON_CLK_RATIO      (1<<5)


/* For sysctl proc_dointvec_minmax of i915_oa_max_sample_rate
 *
 * The highest sampling frequency we can theoretically program the OA unit
 * with is always half the timestamp frequency: E.g. 6.25Mhz for Haswell.
 *
 * Initialized just before we register the sysctl parameter.
 */
static int oa_sample_rate_hard_limit;

/* Theoretically we can program the OA unit to sample every 160ns but don't
 * allow that by default unless root...
 *
 * The default threshold of 100000Hz is based on perf's similar
 * kernel.perf_event_max_sample_rate sysctl parameter.
 */
static u32 i915_oa_max_sample_rate = 100000;

/* XXX: beware if future OA HW adds new report formats that the current
 * code assumes all reports have a power-of-two size and ~(size - 1) can
 * be used as a mask to align the OA tail pointer.
 */
static const struct i915_oa_format hsw_oa_formats[I915_OA_FORMAT_MAX] = {
        [I915_OA_FORMAT_A13]        = { 0, 64 },
        [I915_OA_FORMAT_A29]        = { 1, 128 },
        [I915_OA_FORMAT_A13_B8_C8]  = { 2, 128 },
        /* A29_B8_C8 Disallowed as 192 bytes doesn't factor into buffer size */
        [I915_OA_FORMAT_B4_C8]      = { 4, 64 },
        [I915_OA_FORMAT_A45_B8_C8]  = { 5, 256 },
        [I915_OA_FORMAT_B4_C8_A16]  = { 6, 128 },
        [I915_OA_FORMAT_C4_B8]      = { 7, 64 },
};

static const struct i915_oa_format gen8_plus_oa_formats[I915_OA_FORMAT_MAX] = {
        [I915_OA_FORMAT_A12]                = { 0, 64 },
        [I915_OA_FORMAT_A12_B8_C8]          = { 2, 128 },
        [I915_OA_FORMAT_A32u40_A4u32_B8_C8] = { 5, 256 },
        [I915_OA_FORMAT_C4_B8]              = { 7, 64 },
};

static const struct i915_oa_format gen12_oa_formats[I915_OA_FORMAT_MAX] = {
        [I915_OA_FORMAT_A32u40_A4u32_B8_C8] = { 5, 256 },
};

#define SAMPLE_OA_REPORT      (1<<0)

/**
 * struct perf_open_properties - for validated properties given to open a stream
 * @sample_flags: `DRM_I915_PERF_PROP_SAMPLE_*` properties are tracked as flags
 * @single_context: Whether a single or all gpu contexts should be monitored
 * @hold_preemption: Whether the preemption is disabled for the filtered
 *                   context
 * @ctx_handle: A gem ctx handle for use with @single_context
 * @metrics_set: An ID for an OA unit metric set advertised via sysfs
 * @oa_format: An OA unit HW report format
 * @oa_periodic: Whether to enable periodic OA unit sampling
 * @oa_period_exponent: The OA unit sampling period is derived from this
 * @engine: The engine (typically rcs0) being monitored by the OA unit
 *
 * As read_properties_unlocked() enumerates and validates the properties given
 * to open a stream of metrics the configuration is built up in the structure
 * which starts out zero initialized.
 */
struct perf_open_properties {
        u32 sample_flags;

        u64 single_context:1;
        u64 hold_preemption:1;
        u64 ctx_handle;

        /* OA sampling state */
        int metrics_set;
        int oa_format;
        bool oa_periodic;
        int oa_period_exponent;

        struct intel_engine_cs *engine;
};

struct i915_oa_config_bo {
        struct llist_node node;

        struct i915_oa_config *oa_config;
        struct i915_vma *vma;
};

static struct ctl_table_header *sysctl_header;

static enum hrtimer_restart oa_poll_check_timer_cb(struct hrtimer *hrtimer);

void i915_oa_config_release(struct kref *ref)
{
        struct i915_oa_config *oa_config =
                container_of(ref, typeof(*oa_config), ref);

        kfree(oa_config->flex_regs);
        kfree(oa_config->b_counter_regs);
        kfree(oa_config->mux_regs);

        kfree_rcu(oa_config, rcu);
}

struct i915_oa_config *
i915_perf_get_oa_config(struct i915_perf *perf, int metrics_set)
{
        struct i915_oa_config *oa_config;

        rcu_read_lock();
        if (metrics_set == 1)
                oa_config = &perf->test_config;
        else
                oa_config = idr_find(&perf->metrics_idr, metrics_set);
        if (oa_config)
                oa_config = i915_oa_config_get(oa_config);
        rcu_read_unlock();

        return oa_config;
}

static void free_oa_config_bo(struct i915_oa_config_bo *oa_bo)
{
        i915_oa_config_put(oa_bo->oa_config);
        i915_vma_put(oa_bo->vma);
        kfree(oa_bo);
}

static u32 gen12_oa_hw_tail_read(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;

        return intel_uncore_read(uncore, GEN12_OAG_OATAILPTR) &
               GEN12_OAG_OATAILPTR_MASK;
}

static u32 gen8_oa_hw_tail_read(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;

        return intel_uncore_read(uncore, GEN8_OATAILPTR) & GEN8_OATAILPTR_MASK;
}

static u32 gen7_oa_hw_tail_read(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;
        u32 oastatus1 = intel_uncore_read(uncore, GEN7_OASTATUS1);

        return oastatus1 & GEN7_OASTATUS1_TAIL_MASK;
}

/**
 * oa_buffer_check_unlocked - check for data and update tail ptr state
 * @stream: i915 stream instance
 *
 * This is either called via fops (for blocking reads in user ctx) or the poll
 * check hrtimer (atomic ctx) to check the OA buffer tail pointer and check
 * if there is data available for userspace to read.
 *
 * This function is central to providing a workaround for the OA unit tail
 * pointer having a race with respect to what data is visible to the CPU.
 * It is responsible for reading tail pointers from the hardware and giving
 * the pointers time to 'age' before they are made available for reading.
 * (See description of OA_TAIL_MARGIN_NSEC above for further details.)
 *
 * Besides returning true when there is data available to read() this function
 * also has the side effect of updating the oa_buffer.tails[], .aging_timestamp
 * and .aged_tail_idx state used for reading.
 *
 * Note: It's safe to read OA config state here unlocked, assuming that this is
 * only called while the stream is enabled, while the global OA configuration
 * can't be modified.
 *
 * Returns: %true if the OA buffer contains data, else %false
 */
static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream)
{
        int report_size = stream->oa_buffer.format_size;
        unsigned long flags;
        unsigned int aged_idx;
        u32 head, hw_tail, aged_tail, aging_tail;
        u64 now;

        /* We have to consider the (unlikely) possibility that read() errors
         * could result in an OA buffer reset which might reset the head,
         * tails[] and aged_tail state.
         */
        spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);

        /* NB: The head we observe here might effectively be a little out of
         * date (between head and tails[aged_idx].offset if there is currently
         * a read() in progress.
         */
        head = stream->oa_buffer.head;

        aged_idx = stream->oa_buffer.aged_tail_idx;
        aged_tail = stream->oa_buffer.tails[aged_idx].offset;
        aging_tail = stream->oa_buffer.tails[!aged_idx].offset;

        hw_tail = stream->perf->ops.oa_hw_tail_read(stream);

        /* The tail pointer increases in 64 byte increments,
         * not in report_size steps...
         */
        hw_tail &= ~(report_size - 1);

        now = ktime_get_mono_fast_ns();

        /* Update the aged tail
         *
         * Flip the tail pointer available for read()s once the aging tail is
         * old enough to trust that the corresponding data will be visible to
         * the CPU...
         *
         * Do this before updating the aging pointer in case we may be able to
         * immediately start aging a new pointer too (if new data has become
         * available) without needing to wait for a later hrtimer callback.
         */
        if (aging_tail != INVALID_TAIL_PTR &&
            ((now - stream->oa_buffer.aging_timestamp) >
             OA_TAIL_MARGIN_NSEC)) {

                aged_idx ^= 1;
                stream->oa_buffer.aged_tail_idx = aged_idx;

                aged_tail = aging_tail;

                /* Mark that we need a new pointer to start aging... */
                stream->oa_buffer.tails[!aged_idx].offset = INVALID_TAIL_PTR;
                aging_tail = INVALID_TAIL_PTR;
        }

        /* Update the aging tail
         *
         * We throttle aging tail updates until we have a new tail that
         * represents >= one report more data than is already available for
         * reading. This ensures there will be enough data for a successful
         * read once this new pointer has aged and ensures we will give the new
         * pointer time to age.
         */
        if (aging_tail == INVALID_TAIL_PTR &&
            (aged_tail == INVALID_TAIL_PTR ||
             OA_TAKEN(hw_tail, aged_tail) >= report_size)) {
                struct i915_vma *vma = stream->oa_buffer.vma;
                u32 gtt_offset = i915_ggtt_offset(vma);

                /* Be paranoid and do a bounds check on the pointer read back
                 * from hardware, just in case some spurious hardware condition
                 * could put the tail out of bounds...
                 */
                if (hw_tail >= gtt_offset &&
                    hw_tail < (gtt_offset + OA_BUFFER_SIZE)) {
                        stream->oa_buffer.tails[!aged_idx].offset =
                                aging_tail = hw_tail;
                        stream->oa_buffer.aging_timestamp = now;
                } else {
                        DRM_ERROR("Ignoring spurious out of range OA buffer tail pointer = %x\n",
                                  hw_tail);
                }
        }

        spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);

        return aged_tail == INVALID_TAIL_PTR ?
                false : OA_TAKEN(aged_tail, head) >= report_size;
}

/**
 * append_oa_status - Appends a status record to a userspace read() buffer.
 * @stream: An i915-perf stream opened for OA metrics
 * @buf: destination buffer given by userspace
 * @count: the number of bytes userspace wants to read
 * @offset: (inout): the current position for writing into @buf
 * @type: The kind of status to report to userspace
 *
 * Writes a status record (such as `DRM_I915_PERF_RECORD_OA_REPORT_LOST`)
 * into the userspace read() buffer.
 *
 * The @buf @offset will only be updated on success.
 *
 * Returns: 0 on success, negative error code on failure.
 */
static int append_oa_status(struct i915_perf_stream *stream,
                            char __user *buf,
                            size_t count,
                            size_t *offset,
                            enum drm_i915_perf_record_type type)
{
        struct drm_i915_perf_record_header header = { type, 0, sizeof(header) };

        if ((count - *offset) < header.size)
                return -ENOSPC;

        if (copy_to_user(buf + *offset, &header, sizeof(header)))
                return -EFAULT;

        (*offset) += header.size;

        return 0;
}

/**
 * append_oa_sample - Copies single OA report into userspace read() buffer.
 * @stream: An i915-perf stream opened for OA metrics
 * @buf: destination buffer given by userspace
 * @count: the number of bytes userspace wants to read
 * @offset: (inout): the current position for writing into @buf
 * @report: A single OA report to (optionally) include as part of the sample
 *
 * The contents of a sample are configured through `DRM_I915_PERF_PROP_SAMPLE_*`
 * properties when opening a stream, tracked as `stream->sample_flags`. This
 * function copies the requested components of a single sample to the given
 * read() @buf.
 *
 * The @buf @offset will only be updated on success.
 *
 * Returns: 0 on success, negative error code on failure.
 */
static int append_oa_sample(struct i915_perf_stream *stream,
                            char __user *buf,
                            size_t count,
                            size_t *offset,
                            const u8 *report)
{
        int report_size = stream->oa_buffer.format_size;
        struct drm_i915_perf_record_header header;
        u32 sample_flags = stream->sample_flags;

        header.type = DRM_I915_PERF_RECORD_SAMPLE;
        header.pad = 0;
        header.size = stream->sample_size;

        if ((count - *offset) < header.size)
                return -ENOSPC;

        buf += *offset;
        if (copy_to_user(buf, &header, sizeof(header)))
                return -EFAULT;
        buf += sizeof(header);

        if (sample_flags & SAMPLE_OA_REPORT) {
                if (copy_to_user(buf, report, report_size))
                        return -EFAULT;
        }

        (*offset) += header.size;

        return 0;
}

/**
 * Copies all buffered OA reports into userspace read() buffer.
 * @stream: An i915-perf stream opened for OA metrics
 * @buf: destination buffer given by userspace
 * @count: the number of bytes userspace wants to read
 * @offset: (inout): the current position for writing into @buf
 *
 * Notably any error condition resulting in a short read (-%ENOSPC or
 * -%EFAULT) will be returned even though one or more records may
 * have been successfully copied. In this case it's up to the caller
 * to decide if the error should be squashed before returning to
 * userspace.
 *
 * Note: reports are consumed from the head, and appended to the
 * tail, so the tail chases the head?... If you think that's mad
 * and back-to-front you're not alone, but this follows the
 * Gen PRM naming convention.
 *
 * Returns: 0 on success, negative error code on failure.
 */
static int gen8_append_oa_reports(struct i915_perf_stream *stream,
                                  char __user *buf,
                                  size_t count,
                                  size_t *offset)
{
        struct intel_uncore *uncore = stream->uncore;
        int report_size = stream->oa_buffer.format_size;
        u8 *oa_buf_base = stream->oa_buffer.vaddr;
        u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
        u32 mask = (OA_BUFFER_SIZE - 1);
        size_t start_offset = *offset;
        unsigned long flags;
        unsigned int aged_tail_idx;
        u32 head, tail;
        u32 taken;
        int ret = 0;

        if (WARN_ON(!stream->enabled))
                return -EIO;

        spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);

        head = stream->oa_buffer.head;
        aged_tail_idx = stream->oa_buffer.aged_tail_idx;
        tail = stream->oa_buffer.tails[aged_tail_idx].offset;

        spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);

        /*
         * An invalid tail pointer here means we're still waiting for the poll
         * hrtimer callback to give us a pointer
         */
        if (tail == INVALID_TAIL_PTR)
                return -EAGAIN;

        /*
         * NB: oa_buffer.head/tail include the gtt_offset which we don't want
         * while indexing relative to oa_buf_base.
         */
        head -= gtt_offset;
        tail -= gtt_offset;

        /*
         * An out of bounds or misaligned head or tail pointer implies a driver
         * bug since we validate + align the tail pointers we read from the
         * hardware and we are in full control of the head pointer which should
         * only be incremented by multiples of the report size (notably also
         * all a power of two).
         */
        if (WARN_ONCE(head > OA_BUFFER_SIZE || head % report_size ||
                      tail > OA_BUFFER_SIZE || tail % report_size,
                      "Inconsistent OA buffer pointers: head = %u, tail = %u\n",
                      head, tail))
                return -EIO;


        for (/* none */;
             (taken = OA_TAKEN(tail, head));
             head = (head + report_size) & mask) {
                u8 *report = oa_buf_base + head;
                u32 *report32 = (void *)report;
                u32 ctx_id;
                u32 reason;

                /*
                 * All the report sizes factor neatly into the buffer
                 * size so we never expect to see a report split
                 * between the beginning and end of the buffer.
                 *
                 * Given the initial alignment check a misalignment
                 * here would imply a driver bug that would result
                 * in an overrun.
                 */
                if (WARN_ON((OA_BUFFER_SIZE - head) < report_size)) {
                        DRM_ERROR("Spurious OA head ptr: non-integral report offset\n");
                        break;
                }

                /*
                 * The reason field includes flags identifying what
                 * triggered this specific report (mostly timer
                 * triggered or e.g. due to a context switch).
                 *
                 * This field is never expected to be zero so we can
                 * check that the report isn't invalid before copying
                 * it to userspace...
                 */
                reason = ((report32[0] >> OAREPORT_REASON_SHIFT) &
                          (IS_GEN(stream->perf->i915, 12) ?
                           OAREPORT_REASON_MASK_EXTENDED :
                           OAREPORT_REASON_MASK));
                if (reason == 0) {
                        if (__ratelimit(&stream->perf->spurious_report_rs))
                                DRM_NOTE("Skipping spurious, invalid OA report\n");
                        continue;
                }

                ctx_id = report32[2] & stream->specific_ctx_id_mask;

                /*
                 * Squash whatever is in the CTX_ID field if it's marked as
                 * invalid to be sure we avoid false-positive, single-context
                 * filtering below...
                 *
                 * Note: that we don't clear the valid_ctx_bit so userspace can
                 * understand that the ID has been squashed by the kernel.
                 */
                if (!(report32[0] & stream->perf->gen8_valid_ctx_bit) &&
                    INTEL_GEN(stream->perf->i915) <= 11)
                        ctx_id = report32[2] = INVALID_CTX_ID;

                /*
                 * NB: For Gen 8 the OA unit no longer supports clock gating
                 * off for a specific context and the kernel can't securely
                 * stop the counters from updating as system-wide / global
                 * values.
                 *
                 * Automatic reports now include a context ID so reports can be
                 * filtered on the cpu but it's not worth trying to
                 * automatically subtract/hide counter progress for other
                 * contexts while filtering since we can't stop userspace
                 * issuing MI_REPORT_PERF_COUNT commands which would still
                 * provide a side-band view of the real values.
                 *
                 * To allow userspace (such as Mesa/GL_INTEL_performance_query)
                 * to normalize counters for a single filtered context then it
                 * needs be forwarded bookend context-switch reports so that it
                 * can track switches in between MI_REPORT_PERF_COUNT commands
                 * and can itself subtract/ignore the progress of counters
                 * associated with other contexts. Note that the hardware
                 * automatically triggers reports when switching to a new
                 * context which are tagged with the ID of the newly active
                 * context. To avoid the complexity (and likely fragility) of
                 * reading ahead while parsing reports to try and minimize
                 * forwarding redundant context switch reports (i.e. between
                 * other, unrelated contexts) we simply elect to forward them
                 * all.
                 *
                 * We don't rely solely on the reason field to identify context
                 * switches since it's not-uncommon for periodic samples to
                 * identify a switch before any 'context switch' report.
                 */
                if (!stream->perf->exclusive_stream->ctx ||
                    stream->specific_ctx_id == ctx_id ||
                    stream->oa_buffer.last_ctx_id == stream->specific_ctx_id ||
                    reason & OAREPORT_REASON_CTX_SWITCH) {

                        /*
                         * While filtering for a single context we avoid
                         * leaking the IDs of other contexts.
                         */
                        if (stream->perf->exclusive_stream->ctx &&
                            stream->specific_ctx_id != ctx_id) {
                                report32[2] = INVALID_CTX_ID;
                        }

                        ret = append_oa_sample(stream, buf, count, offset,
                                               report);
                        if (ret)
                                break;

                        stream->oa_buffer.last_ctx_id = ctx_id;
                }

                /*
                 * The above reason field sanity check is based on
                 * the assumption that the OA buffer is initially
                 * zeroed and we reset the field after copying so the
                 * check is still meaningful once old reports start
                 * being overwritten.
                 */
                report32[0] = 0;
        }

        if (start_offset != *offset) {
                i915_reg_t oaheadptr;

                oaheadptr = IS_GEN(stream->perf->i915, 12) ?
                            GEN12_OAG_OAHEADPTR : GEN8_OAHEADPTR;

                spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);

                /*
                 * We removed the gtt_offset for the copy loop above, indexing
                 * relative to oa_buf_base so put back here...
                 */
                head += gtt_offset;
                intel_uncore_write(uncore, oaheadptr,
                                   head & GEN12_OAG_OAHEADPTR_MASK);
                stream->oa_buffer.head = head;

                spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
        }

        return ret;
}

/**
 * gen8_oa_read - copy status records then buffered OA reports
 * @stream: An i915-perf stream opened for OA metrics
 * @buf: destination buffer given by userspace
 * @count: the number of bytes userspace wants to read
 * @offset: (inout): the current position for writing into @buf
 *
 * Checks OA unit status registers and if necessary appends corresponding
 * status records for userspace (such as for a buffer full condition) and then
 * initiate appending any buffered OA reports.
 *
 * Updates @offset according to the number of bytes successfully copied into
 * the userspace buffer.
 *
 * NB: some data may be successfully copied to the userspace buffer
 * even if an error is returned, and this is reflected in the
 * updated @offset.
 *
 * Returns: zero on success or a negative error code
 */
static int gen8_oa_read(struct i915_perf_stream *stream,
                        char __user *buf,
                        size_t count,
                        size_t *offset)
{
        struct intel_uncore *uncore = stream->uncore;
        u32 oastatus;
        i915_reg_t oastatus_reg;
        int ret;

        if (WARN_ON(!stream->oa_buffer.vaddr))
                return -EIO;

        oastatus_reg = IS_GEN(stream->perf->i915, 12) ?
                       GEN12_OAG_OASTATUS : GEN8_OASTATUS;

        oastatus = intel_uncore_read(uncore, oastatus_reg);

        /*
         * We treat OABUFFER_OVERFLOW as a significant error:
         *
         * Although theoretically we could handle this more gracefully
         * sometimes, some Gens don't correctly suppress certain
         * automatically triggered reports in this condition and so we
         * have to assume that old reports are now being trampled
         * over.
         *
         * Considering how we don't currently give userspace control
         * over the OA buffer size and always configure a large 16MB
         * buffer, then a buffer overflow does anyway likely indicate
         * that something has gone quite badly wrong.
         */
        if (oastatus & GEN8_OASTATUS_OABUFFER_OVERFLOW) {
                ret = append_oa_status(stream, buf, count, offset,
                                       DRM_I915_PERF_RECORD_OA_BUFFER_LOST);
                if (ret)
                        return ret;

                DRM_DEBUG("OA buffer overflow (exponent = %d): force restart\n",
                          stream->period_exponent);

                stream->perf->ops.oa_disable(stream);
                stream->perf->ops.oa_enable(stream);

                /*
                 * Note: .oa_enable() is expected to re-init the oabuffer and
                 * reset GEN8_OASTATUS for us
                 */
                oastatus = intel_uncore_read(uncore, oastatus_reg);
        }

        if (oastatus & GEN8_OASTATUS_REPORT_LOST) {
                ret = append_oa_status(stream, buf, count, offset,
                                       DRM_I915_PERF_RECORD_OA_REPORT_LOST);
                if (ret)
                        return ret;
                intel_uncore_write(uncore, oastatus_reg,
                                   oastatus & ~GEN8_OASTATUS_REPORT_LOST);
        }

        return gen8_append_oa_reports(stream, buf, count, offset);
}

/**
 * Copies all buffered OA reports into userspace read() buffer.
 * @stream: An i915-perf stream opened for OA metrics
 * @buf: destination buffer given by userspace
 * @count: the number of bytes userspace wants to read
 * @offset: (inout): the current position for writing into @buf
 *
 * Notably any error condition resulting in a short read (-%ENOSPC or
 * -%EFAULT) will be returned even though one or more records may
 * have been successfully copied. In this case it's up to the caller
 * to decide if the error should be squashed before returning to
 * userspace.
 *
 * Note: reports are consumed from the head, and appended to the
 * tail, so the tail chases the head?... If you think that's mad
 * and back-to-front you're not alone, but this follows the
 * Gen PRM naming convention.
 *
 * Returns: 0 on success, negative error code on failure.
 */
static int gen7_append_oa_reports(struct i915_perf_stream *stream,
                                  char __user *buf,
                                  size_t count,
                                  size_t *offset)
{
        struct intel_uncore *uncore = stream->uncore;
        int report_size = stream->oa_buffer.format_size;
        u8 *oa_buf_base = stream->oa_buffer.vaddr;
        u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
        u32 mask = (OA_BUFFER_SIZE - 1);
        size_t start_offset = *offset;
        unsigned long flags;
        unsigned int aged_tail_idx;
        u32 head, tail;
        u32 taken;
        int ret = 0;

        if (WARN_ON(!stream->enabled))
                return -EIO;

        spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);

        head = stream->oa_buffer.head;
        aged_tail_idx = stream->oa_buffer.aged_tail_idx;
        tail = stream->oa_buffer.tails[aged_tail_idx].offset;

        spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);

        /* An invalid tail pointer here means we're still waiting for the poll
         * hrtimer callback to give us a pointer
         */
        if (tail == INVALID_TAIL_PTR)
                return -EAGAIN;

        /* NB: oa_buffer.head/tail include the gtt_offset which we don't want
         * while indexing relative to oa_buf_base.
         */
        head -= gtt_offset;
        tail -= gtt_offset;

        /* An out of bounds or misaligned head or tail pointer implies a driver
         * bug since we validate + align the tail pointers we read from the
         * hardware and we are in full control of the head pointer which should
         * only be incremented by multiples of the report size (notably also
         * all a power of two).
         */
        if (WARN_ONCE(head > OA_BUFFER_SIZE || head % report_size ||
                      tail > OA_BUFFER_SIZE || tail % report_size,
                      "Inconsistent OA buffer pointers: head = %u, tail = %u\n",
                      head, tail))
                return -EIO;


        for (/* none */;
             (taken = OA_TAKEN(tail, head));
             head = (head + report_size) & mask) {
                u8 *report = oa_buf_base + head;
                u32 *report32 = (void *)report;

                /* All the report sizes factor neatly into the buffer
                 * size so we never expect to see a report split
                 * between the beginning and end of the buffer.
                 *
                 * Given the initial alignment check a misalignment
                 * here would imply a driver bug that would result
                 * in an overrun.
                 */
                if (WARN_ON((OA_BUFFER_SIZE - head) < report_size)) {
                        DRM_ERROR("Spurious OA head ptr: non-integral report offset\n");
                        break;
                }

                /* The report-ID field for periodic samples includes
                 * some undocumented flags related to what triggered
                 * the report and is never expected to be zero so we
                 * can check that the report isn't invalid before
                 * copying it to userspace...
                 */
                if (report32[0] == 0) {
                        if (__ratelimit(&stream->perf->spurious_report_rs))
                                DRM_NOTE("Skipping spurious, invalid OA report\n");
                        continue;
                }

                ret = append_oa_sample(stream, buf, count, offset, report);
                if (ret)
                        break;

                /* The above report-id field sanity check is based on
                 * the assumption that the OA buffer is initially
                 * zeroed and we reset the field after copying so the
                 * check is still meaningful once old reports start
                 * being overwritten.
                 */
                report32[0] = 0;
        }

        if (start_offset != *offset) {
                spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);

                /* We removed the gtt_offset for the copy loop above, indexing
                 * relative to oa_buf_base so put back here...
                 */
                head += gtt_offset;

                intel_uncore_write(uncore, GEN7_OASTATUS2,
                                   (head & GEN7_OASTATUS2_HEAD_MASK) |
                                   GEN7_OASTATUS2_MEM_SELECT_GGTT);
                stream->oa_buffer.head = head;

                spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
        }

        return ret;
}

/**
 * gen7_oa_read - copy status records then buffered OA reports
 * @stream: An i915-perf stream opened for OA metrics
 * @buf: destination buffer given by userspace
 * @count: the number of bytes userspace wants to read
 * @offset: (inout): the current position for writing into @buf
 *
 * Checks Gen 7 specific OA unit status registers and if necessary appends
 * corresponding status records for userspace (such as for a buffer full
 * condition) and then initiate appending any buffered OA reports.
 *
 * Updates @offset according to the number of bytes successfully copied into
 * the userspace buffer.
 *
 * Returns: zero on success or a negative error code
 */
static int gen7_oa_read(struct i915_perf_stream *stream,
                        char __user *buf,
                        size_t count,
                        size_t *offset)
{
        struct intel_uncore *uncore = stream->uncore;
        u32 oastatus1;
        int ret;

        if (WARN_ON(!stream->oa_buffer.vaddr))
                return -EIO;

        oastatus1 = intel_uncore_read(uncore, GEN7_OASTATUS1);

        /* XXX: On Haswell we don't have a safe way to clear oastatus1
         * bits while the OA unit is enabled (while the tail pointer
         * may be updated asynchronously) so we ignore status bits
         * that have already been reported to userspace.
         */
        oastatus1 &= ~stream->perf->gen7_latched_oastatus1;

        /* We treat OABUFFER_OVERFLOW as a significant error:
         *
         * - The status can be interpreted to mean that the buffer is
         *   currently full (with a higher precedence than OA_TAKEN()
         *   which will start to report a near-empty buffer after an
         *   overflow) but it's awkward that we can't clear the status
         *   on Haswell, so without a reset we won't be able to catch
         *   the state again.
         *
         * - Since it also implies the HW has started overwriting old
         *   reports it may also affect our sanity checks for invalid
         *   reports when copying to userspace that assume new reports
         *   are being written to cleared memory.
         *
         * - In the future we may want to introduce a flight recorder
         *   mode where the driver will automatically maintain a safe
         *   guard band between head/tail, avoiding this overflow
         *   condition, but we avoid the added driver complexity for
         *   now.
         */
        if (unlikely(oastatus1 & GEN7_OASTATUS1_OABUFFER_OVERFLOW)) {
                ret = append_oa_status(stream, buf, count, offset,
                                       DRM_I915_PERF_RECORD_OA_BUFFER_LOST);
                if (ret)
                        return ret;

                DRM_DEBUG("OA buffer overflow (exponent = %d): force restart\n",
                          stream->period_exponent);

                stream->perf->ops.oa_disable(stream);
                stream->perf->ops.oa_enable(stream);

                oastatus1 = intel_uncore_read(uncore, GEN7_OASTATUS1);
        }

        if (unlikely(oastatus1 & GEN7_OASTATUS1_REPORT_LOST)) {
                ret = append_oa_status(stream, buf, count, offset,
                                       DRM_I915_PERF_RECORD_OA_REPORT_LOST);
                if (ret)
                        return ret;
                stream->perf->gen7_latched_oastatus1 |=
                        GEN7_OASTATUS1_REPORT_LOST;
        }

        return gen7_append_oa_reports(stream, buf, count, offset);
}

/**
 * i915_oa_wait_unlocked - handles blocking IO until OA data available
 * @stream: An i915-perf stream opened for OA metrics
 *
 * Called when userspace tries to read() from a blocking stream FD opened
 * for OA metrics. It waits until the hrtimer callback finds a non-empty
 * OA buffer and wakes us.
 *
 * Note: it's acceptable to have this return with some false positives
 * since any subsequent read handling will return -EAGAIN if there isn't
 * really data ready for userspace yet.
 *
 * Returns: zero on success or a negative error code
 */
static int i915_oa_wait_unlocked(struct i915_perf_stream *stream)
{
        /* We would wait indefinitely if periodic sampling is not enabled */
        if (!stream->periodic)
                return -EIO;

        return wait_event_interruptible(stream->poll_wq,
                                        oa_buffer_check_unlocked(stream));
}

/**
 * i915_oa_poll_wait - call poll_wait() for an OA stream poll()
 * @stream: An i915-perf stream opened for OA metrics
 * @file: An i915 perf stream file
 * @wait: poll() state table
 *
 * For handling userspace polling on an i915 perf stream opened for OA metrics,
 * this starts a poll_wait with the wait queue that our hrtimer callback wakes
 * when it sees data ready to read in the circular OA buffer.
 */
static void i915_oa_poll_wait(struct i915_perf_stream *stream,
                              struct file *file,
                              poll_table *wait)
{
        poll_wait(file, &stream->poll_wq, wait);
}

/**
 * i915_oa_read - just calls through to &i915_oa_ops->read
 * @stream: An i915-perf stream opened for OA metrics
 * @buf: destination buffer given by userspace
 * @count: the number of bytes userspace wants to read
 * @offset: (inout): the current position for writing into @buf
 *
 * Updates @offset according to the number of bytes successfully copied into
 * the userspace buffer.
 *
 * Returns: zero on success or a negative error code
 */
static int i915_oa_read(struct i915_perf_stream *stream,
                        char __user *buf,
                        size_t count,
                        size_t *offset)
{
        return stream->perf->ops.read(stream, buf, count, offset);
}

static struct intel_context *oa_pin_context(struct i915_perf_stream *stream)
{
        struct i915_gem_engines_iter it;
        struct i915_gem_context *ctx = stream->ctx;
        struct intel_context *ce;
        int err;

        for_each_gem_engine(ce, i915_gem_context_lock_engines(ctx), it) {
                if (ce->engine != stream->engine) /* first match! */
                        continue;

                /*
                 * As the ID is the gtt offset of the context's vma we
                 * pin the vma to ensure the ID remains fixed.
                 */
                err = intel_context_pin(ce);
                if (err == 0) {
                        stream->pinned_ctx = ce;
                        break;
                }
        }
        i915_gem_context_unlock_engines(ctx);

        return stream->pinned_ctx;
}

/**
 * oa_get_render_ctx_id - determine and hold ctx hw id
 * @stream: An i915-perf stream opened for OA metrics
 *
 * Determine the render context hw id, and ensure it remains fixed for the
 * lifetime of the stream. This ensures that we don't have to worry about
 * updating the context ID in OACONTROL on the fly.
 *
 * Returns: zero on success or a negative error code
 */
static int oa_get_render_ctx_id(struct i915_perf_stream *stream)
{
        struct intel_context *ce;

        ce = oa_pin_context(stream);
        if (IS_ERR(ce))
                return PTR_ERR(ce);

        switch (INTEL_GEN(ce->engine->i915)) {
        case 7: {
                /*
                 * On Haswell we don't do any post processing of the reports
                 * and don't need to use the mask.
                 */
                stream->specific_ctx_id = i915_ggtt_offset(ce->state);
                stream->specific_ctx_id_mask = 0;
                break;
        }

        case 8:
        case 9:
        case 10:
                if (intel_engine_in_execlists_submission_mode(ce->engine)) {
                        stream->specific_ctx_id_mask =
                                (1U << GEN8_CTX_ID_WIDTH) - 1;
                        stream->specific_ctx_id = stream->specific_ctx_id_mask;
                } else {
                        /*
                         * When using GuC, the context descriptor we write in
                         * i915 is read by GuC and rewritten before it's
                         * actually written into the hardware. The LRCA is
                         * what is put into the context id field of the
                         * context descriptor by GuC. Because it's aligned to
                         * a page, the lower 12bits are always at 0 and
                         * dropped by GuC. They won't be part of the context
                         * ID in the OA reports, so squash those lower bits.
                         */
                        stream->specific_ctx_id =
                                lower_32_bits(ce->lrc_desc) >> 12;

                        /*
                         * GuC uses the top bit to signal proxy submission, so
                         * ignore that bit.
                         */
                        stream->specific_ctx_id_mask =
                                (1U << (GEN8_CTX_ID_WIDTH - 1)) - 1;
                }
                break;

        case 11:
        case 12: {
                stream->specific_ctx_id_mask =
                        ((1U << GEN11_SW_CTX_ID_WIDTH) - 1) << (GEN11_SW_CTX_ID_SHIFT - 32);
                stream->specific_ctx_id = stream->specific_ctx_id_mask;
                break;
        }

        default:
                MISSING_CASE(INTEL_GEN(ce->engine->i915));
        }

        ce->tag = stream->specific_ctx_id_mask;

        DRM_DEBUG_DRIVER("filtering on ctx_id=0x%x ctx_id_mask=0x%x\n",
                         stream->specific_ctx_id,
                         stream->specific_ctx_id_mask);

        return 0;
}

/**
 * oa_put_render_ctx_id - counterpart to oa_get_render_ctx_id releases hold
 * @stream: An i915-perf stream opened for OA metrics
 *
 * In case anything needed doing to ensure the context HW ID would remain valid
 * for the lifetime of the stream, then that can be undone here.
 */
static void oa_put_render_ctx_id(struct i915_perf_stream *stream)
{
        struct intel_context *ce;

        ce = fetch_and_zero(&stream->pinned_ctx);
        if (ce) {
                ce->tag = 0; /* recomputed on next submission after parking */
                intel_context_unpin(ce);
        }

        stream->specific_ctx_id = INVALID_CTX_ID;
        stream->specific_ctx_id_mask = 0;
}

static void
free_oa_buffer(struct i915_perf_stream *stream)
{
        i915_vma_unpin_and_release(&stream->oa_buffer.vma,
                                   I915_VMA_RELEASE_MAP);

        stream->oa_buffer.vaddr = NULL;
}

static void
free_oa_configs(struct i915_perf_stream *stream)
{
        struct i915_oa_config_bo *oa_bo, *tmp;

        i915_oa_config_put(stream->oa_config);
        llist_for_each_entry_safe(oa_bo, tmp, stream->oa_config_bos.first, node)
                free_oa_config_bo(oa_bo);
}

static void
free_noa_wait(struct i915_perf_stream *stream)
{
        i915_vma_unpin_and_release(&stream->noa_wait, 0);
}

static void i915_oa_stream_destroy(struct i915_perf_stream *stream)
{
        struct i915_perf *perf = stream->perf;

        BUG_ON(stream != perf->exclusive_stream);

        /*
         * Unset exclusive_stream first, it will be checked while disabling
         * the metric set on gen8+.
         */
        perf->exclusive_stream = NULL;
        perf->ops.disable_metric_set(stream);

        free_oa_buffer(stream);

        intel_uncore_forcewake_put(stream->uncore, FORCEWAKE_ALL);
        intel_engine_pm_put(stream->engine);

        if (stream->ctx)
                oa_put_render_ctx_id(stream);

        free_oa_configs(stream);
        free_noa_wait(stream);

        if (perf->spurious_report_rs.missed) {
                DRM_NOTE("%d spurious OA report notices suppressed due to ratelimiting\n",
                         perf->spurious_report_rs.missed);
        }
}

static void gen7_init_oa_buffer(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;
        u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
        unsigned long flags;

        spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);

        /* Pre-DevBDW: OABUFFER must be set with counters off,
         * before OASTATUS1, but after OASTATUS2
         */
        intel_uncore_write(uncore, GEN7_OASTATUS2, /* head */
                           gtt_offset | GEN7_OASTATUS2_MEM_SELECT_GGTT);
        stream->oa_buffer.head = gtt_offset;

        intel_uncore_write(uncore, GEN7_OABUFFER, gtt_offset);

        intel_uncore_write(uncore, GEN7_OASTATUS1, /* tail */
                           gtt_offset | OABUFFER_SIZE_16M);

        /* Mark that we need updated tail pointers to read from... */
        stream->oa_buffer.tails[0].offset = INVALID_TAIL_PTR;
        stream->oa_buffer.tails[1].offset = INVALID_TAIL_PTR;

        spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);

        /* On Haswell we have to track which OASTATUS1 flags we've
         * already seen since they can't be cleared while periodic
         * sampling is enabled.
         */
        stream->perf->gen7_latched_oastatus1 = 0;

        /* NB: although the OA buffer will initially be allocated
         * zeroed via shmfs (and so this memset is redundant when
         * first allocating), we may re-init the OA buffer, either
         * when re-enabling a stream or in error/reset paths.
         *
         * The reason we clear the buffer for each re-init is for the
         * sanity check in gen7_append_oa_reports() that looks at the
         * report-id field to make sure it's non-zero which relies on
         * the assumption that new reports are being written to zeroed
         * memory...
         */
        memset(stream->oa_buffer.vaddr, 0, OA_BUFFER_SIZE);

        stream->pollin = false;
}

static void gen8_init_oa_buffer(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;
        u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
        unsigned long flags;

        spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);

        intel_uncore_write(uncore, GEN8_OASTATUS, 0);
        intel_uncore_write(uncore, GEN8_OAHEADPTR, gtt_offset);
        stream->oa_buffer.head = gtt_offset;

        intel_uncore_write(uncore, GEN8_OABUFFER_UDW, 0);

        /*
         * PRM says:
         *
         *  "This MMIO must be set before the OATAILPTR
         *  register and after the OAHEADPTR register. This is
         *  to enable proper functionality of the overflow
         *  bit."
         */
        intel_uncore_write(uncore, GEN8_OABUFFER, gtt_offset |
                   OABUFFER_SIZE_16M | GEN8_OABUFFER_MEM_SELECT_GGTT);
        intel_uncore_write(uncore, GEN8_OATAILPTR, gtt_offset & GEN8_OATAILPTR_MASK);

        /* Mark that we need updated tail pointers to read from... */
        stream->oa_buffer.tails[0].offset = INVALID_TAIL_PTR;
        stream->oa_buffer.tails[1].offset = INVALID_TAIL_PTR;

        /*
         * Reset state used to recognise context switches, affecting which
         * reports we will forward to userspace while filtering for a single
         * context.
         */
        stream->oa_buffer.last_ctx_id = INVALID_CTX_ID;

        spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);

        /*
         * NB: although the OA buffer will initially be allocated
         * zeroed via shmfs (and so this memset is redundant when
         * first allocating), we may re-init the OA buffer, either
         * when re-enabling a stream or in error/reset paths.
         *
         * The reason we clear the buffer for each re-init is for the
         * sanity check in gen8_append_oa_reports() that looks at the
         * reason field to make sure it's non-zero which relies on
         * the assumption that new reports are being written to zeroed
         * memory...
         */
        memset(stream->oa_buffer.vaddr, 0, OA_BUFFER_SIZE);

        stream->pollin = false;
}

static void gen12_init_oa_buffer(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;
        u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
        unsigned long flags;

        spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);

        intel_uncore_write(uncore, GEN12_OAG_OASTATUS, 0);
        intel_uncore_write(uncore, GEN12_OAG_OAHEADPTR,
                           gtt_offset & GEN12_OAG_OAHEADPTR_MASK);
        stream->oa_buffer.head = gtt_offset;

        /*
         * PRM says:
         *
         *  "This MMIO must be set before the OATAILPTR
         *  register and after the OAHEADPTR register. This is
         *  to enable proper functionality of the overflow
         *  bit."
         */
        intel_uncore_write(uncore, GEN12_OAG_OABUFFER, gtt_offset |
                           OABUFFER_SIZE_16M | GEN8_OABUFFER_MEM_SELECT_GGTT);
        intel_uncore_write(uncore, GEN12_OAG_OATAILPTR,
                           gtt_offset & GEN12_OAG_OATAILPTR_MASK);

        /* Mark that we need updated tail pointers to read from... */
        stream->oa_buffer.tails[0].offset = INVALID_TAIL_PTR;
        stream->oa_buffer.tails[1].offset = INVALID_TAIL_PTR;

        /*
         * Reset state used to recognise context switches, affecting which
         * reports we will forward to userspace while filtering for a single
         * context.
         */
        stream->oa_buffer.last_ctx_id = INVALID_CTX_ID;

        spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);

        /*
         * NB: although the OA buffer will initially be allocated
         * zeroed via shmfs (and so this memset is redundant when
         * first allocating), we may re-init the OA buffer, either
         * when re-enabling a stream or in error/reset paths.
         *
         * The reason we clear the buffer for each re-init is for the
         * sanity check in gen8_append_oa_reports() that looks at the
         * reason field to make sure it's non-zero which relies on
         * the assumption that new reports are being written to zeroed
         * memory...
         */
        memset(stream->oa_buffer.vaddr, 0,
               stream->oa_buffer.vma->size);

        stream->pollin = false;
}

static int alloc_oa_buffer(struct i915_perf_stream *stream)
{
        struct drm_i915_gem_object *bo;
        struct i915_vma *vma;
        int ret;

        if (WARN_ON(stream->oa_buffer.vma))
                return -ENODEV;

        BUILD_BUG_ON_NOT_POWER_OF_2(OA_BUFFER_SIZE);
        BUILD_BUG_ON(OA_BUFFER_SIZE < SZ_128K || OA_BUFFER_SIZE > SZ_16M);

        bo = i915_gem_object_create_shmem(stream->perf->i915, OA_BUFFER_SIZE);
        if (IS_ERR(bo)) {
                DRM_ERROR("Failed to allocate OA buffer\n");
                return PTR_ERR(bo);
        }

        i915_gem_object_set_cache_coherency(bo, I915_CACHE_LLC);

        /* PreHSW required 512K alignment, HSW requires 16M */
        vma = i915_gem_object_ggtt_pin(bo, NULL, 0, SZ_16M, 0);
        if (IS_ERR(vma)) {
                ret = PTR_ERR(vma);
                goto err_unref;
        }
        stream->oa_buffer.vma = vma;

        stream->oa_buffer.vaddr =
                i915_gem_object_pin_map(bo, I915_MAP_WB);
        if (IS_ERR(stream->oa_buffer.vaddr)) {
                ret = PTR_ERR(stream->oa_buffer.vaddr);
                goto err_unpin;
        }

        return 0;

err_unpin:
        __i915_vma_unpin(vma);

err_unref:
        i915_gem_object_put(bo);

        stream->oa_buffer.vaddr = NULL;
        stream->oa_buffer.vma = NULL;

        return ret;
}

static u32 *save_restore_register(struct i915_perf_stream *stream, u32 *cs,
                                  bool save, i915_reg_t reg, u32 offset,
                                  u32 dword_count)
{
        u32 cmd;
        u32 d;

        cmd = save ? MI_STORE_REGISTER_MEM : MI_LOAD_REGISTER_MEM;
        if (INTEL_GEN(stream->perf->i915) >= 8)
                cmd++;

        for (d = 0; d < dword_count; d++) {
                *cs++ = cmd;
                *cs++ = i915_mmio_reg_offset(reg) + 4 * d;
                *cs++ = intel_gt_scratch_offset(stream->engine->gt,
                                                offset) + 4 * d;
                *cs++ = 0;
        }

        return cs;
}

static int alloc_noa_wait(struct i915_perf_stream *stream)
{
        struct drm_i915_private *i915 = stream->perf->i915;
        struct drm_i915_gem_object *bo;
        struct i915_vma *vma;
        const u64 delay_ticks = 0xffffffffffffffff -
                DIV64_U64_ROUND_UP(
                        atomic64_read(&stream->perf->noa_programming_delay) *
                        RUNTIME_INFO(i915)->cs_timestamp_frequency_khz,
                        1000000ull);
        const u32 base = stream->engine->mmio_base;
#define CS_GPR(x) GEN8_RING_CS_GPR(base, x)
        u32 *batch, *ts0, *cs, *jump;
        int ret, i;
        enum {
                START_TS,
                NOW_TS,
                DELTA_TS,
                JUMP_PREDICATE,
                DELTA_TARGET,
                N_CS_GPR
        };

        bo = i915_gem_object_create_internal(i915, 4096);
        if (IS_ERR(bo)) {
                DRM_ERROR("Failed to allocate NOA wait batchbuffer\n");
                return PTR_ERR(bo);
        }

        /*
         * We pin in GGTT because we jump into this buffer now because
         * multiple OA config BOs will have a jump to this address and it
         * needs to be fixed during the lifetime of the i915/perf stream.
         */
        vma = i915_gem_object_ggtt_pin(bo, NULL, 0, 0, PIN_HIGH);
        if (IS_ERR(vma)) {
                ret = PTR_ERR(vma);
                goto err_unref;
        }

        batch = cs = i915_gem_object_pin_map(bo, I915_MAP_WB);
        if (IS_ERR(batch)) {
                ret = PTR_ERR(batch);
                goto err_unpin;
        }

        /* Save registers. */
        for (i = 0; i < N_CS_GPR; i++)
                cs = save_restore_register(
                        stream, cs, true /* save */, CS_GPR(i),
                        INTEL_GT_SCRATCH_FIELD_PERF_CS_GPR + 8 * i, 2);
        cs = save_restore_register(
                stream, cs, true /* save */, MI_PREDICATE_RESULT_1,
                INTEL_GT_SCRATCH_FIELD_PERF_PREDICATE_RESULT_1, 1);

        /* First timestamp snapshot location. */
        ts0 = cs;

        /*
         * Initial snapshot of the timestamp register to implement the wait.
         * We work with 32b values, so clear out the top 32b bits of the
         * register because the ALU works 64bits.
         */
        *cs++ = MI_LOAD_REGISTER_IMM(1);
        *cs++ = i915_mmio_reg_offset(CS_GPR(START_TS)) + 4;
        *cs++ = 0;
        *cs++ = MI_LOAD_REGISTER_REG | (3 - 2);
        *cs++ = i915_mmio_reg_offset(RING_TIMESTAMP(base));
        *cs++ = i915_mmio_reg_offset(CS_GPR(START_TS));

        /*
         * This is the location we're going to jump back into until the
         * required amount of time has passed.
         */
        jump = cs;

        /*
         * Take another snapshot of the timestamp register. Take care to clear
         * up the top 32bits of CS_GPR(1) as we're using it for other
         * operations below.
         */
        *cs++ = MI_LOAD_REGISTER_IMM(1);
        *cs++ = i915_mmio_reg_offset(CS_GPR(NOW_TS)) + 4;
        *cs++ = 0;
        *cs++ = MI_LOAD_REGISTER_REG | (3 - 2);
        *cs++ = i915_mmio_reg_offset(RING_TIMESTAMP(base));
        *cs++ = i915_mmio_reg_offset(CS_GPR(NOW_TS));

        /*
         * Do a diff between the 2 timestamps and store the result back into
         * CS_GPR(1).
         */
        *cs++ = MI_MATH(5);
        *cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCA, MI_MATH_REG(NOW_TS));
        *cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCB, MI_MATH_REG(START_TS));
        *cs++ = MI_MATH_SUB;
        *cs++ = MI_MATH_STORE(MI_MATH_REG(DELTA_TS), MI_MATH_REG_ACCU);
        *cs++ = MI_MATH_STORE(MI_MATH_REG(JUMP_PREDICATE), MI_MATH_REG_CF);

        /*
         * Transfer the carry flag (set to 1 if ts1 < ts0, meaning the
         * timestamp have rolled over the 32bits) into the predicate register
         * to be used for the predicated jump.
         */
        *cs++ = MI_LOAD_REGISTER_REG | (3 - 2);
        *cs++ = i915_mmio_reg_offset(CS_GPR(JUMP_PREDICATE));
        *cs++ = i915_mmio_reg_offset(MI_PREDICATE_RESULT_1);

        /* Restart from the beginning if we had timestamps roll over. */
        *cs++ = (INTEL_GEN(i915) < 8 ?
                 MI_BATCH_BUFFER_START :
                 MI_BATCH_BUFFER_START_GEN8) |
                MI_BATCH_PREDICATE;
        *cs++ = i915_ggtt_offset(vma) + (ts0 - batch) * 4;
        *cs++ = 0;

        /*
         * Now add the diff between to previous timestamps and add it to :
         *      (((1 * << 64) - 1) - delay_ns)
         *
         * When the Carry Flag contains 1 this means the elapsed time is
         * longer than the expected delay, and we can exit the wait loop.
         */
        *cs++ = MI_LOAD_REGISTER_IMM(2);
        *cs++ = i915_mmio_reg_offset(CS_GPR(DELTA_TARGET));
        *cs++ = lower_32_bits(delay_ticks);
        *cs++ = i915_mmio_reg_offset(CS_GPR(DELTA_TARGET)) + 4;
        *cs++ = upper_32_bits(delay_ticks);

        *cs++ = MI_MATH(4);
        *cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCA, MI_MATH_REG(DELTA_TS));
        *cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCB, MI_MATH_REG(DELTA_TARGET));
        *cs++ = MI_MATH_ADD;
        *cs++ = MI_MATH_STOREINV(MI_MATH_REG(JUMP_PREDICATE), MI_MATH_REG_CF);

        *cs++ = MI_ARB_CHECK;

        /*
         * Transfer the result into the predicate register to be used for the
         * predicated jump.
         */
        *cs++ = MI_LOAD_REGISTER_REG | (3 - 2);
        *cs++ = i915_mmio_reg_offset(CS_GPR(JUMP_PREDICATE));
        *cs++ = i915_mmio_reg_offset(MI_PREDICATE_RESULT_1);

        /* Predicate the jump.  */
        *cs++ = (INTEL_GEN(i915) < 8 ?
                 MI_BATCH_BUFFER_START :
                 MI_BATCH_BUFFER_START_GEN8) |
                MI_BATCH_PREDICATE;
        *cs++ = i915_ggtt_offset(vma) + (jump - batch) * 4;
        *cs++ = 0;

        /* Restore registers. */
        for (i = 0; i < N_CS_GPR; i++)
                cs = save_restore_register(
                        stream, cs, false /* restore */, CS_GPR(i),
                        INTEL_GT_SCRATCH_FIELD_PERF_CS_GPR + 8 * i, 2);
        cs = save_restore_register(
                stream, cs, false /* restore */, MI_PREDICATE_RESULT_1,
                INTEL_GT_SCRATCH_FIELD_PERF_PREDICATE_RESULT_1, 1);

        /* And return to the ring. */
        *cs++ = MI_BATCH_BUFFER_END;

        GEM_BUG_ON(cs - batch > PAGE_SIZE / sizeof(*batch));

        i915_gem_object_flush_map(bo);
        i915_gem_object_unpin_map(bo);

        stream->noa_wait = vma;
        return 0;

err_unpin:
        i915_vma_unpin_and_release(&vma, 0);
err_unref:
        i915_gem_object_put(bo);
        return ret;
}

static u32 *write_cs_mi_lri(u32 *cs,
                            const struct i915_oa_reg *reg_data,
                            u32 n_regs)
{
        u32 i;

        for (i = 0; i < n_regs; i++) {
                if ((i % MI_LOAD_REGISTER_IMM_MAX_REGS) == 0) {
                        u32 n_lri = min_t(u32,
                                          n_regs - i,
                                          MI_LOAD_REGISTER_IMM_MAX_REGS);

                        *cs++ = MI_LOAD_REGISTER_IMM(n_lri);
                }
                *cs++ = i915_mmio_reg_offset(reg_data[i].addr);
                *cs++ = reg_data[i].value;
        }

        return cs;
}

static int num_lri_dwords(int num_regs)
{
        int count = 0;

        if (num_regs > 0) {
                count += DIV_ROUND_UP(num_regs, MI_LOAD_REGISTER_IMM_MAX_REGS);
                count += num_regs * 2;
        }

        return count;
}

static struct i915_oa_config_bo *
alloc_oa_config_buffer(struct i915_perf_stream *stream,
                       struct i915_oa_config *oa_config)
{
        struct drm_i915_gem_object *obj;
        struct i915_oa_config_bo *oa_bo;
        size_t config_length = 0;
        u32 *cs;
        int err;

        oa_bo = kzalloc(sizeof(*oa_bo), GFP_KERNEL);
        if (!oa_bo)
                return ERR_PTR(-ENOMEM);

        config_length += num_lri_dwords(oa_config->mux_regs_len);
        config_length += num_lri_dwords(oa_config->b_counter_regs_len);
        config_length += num_lri_dwords(oa_config->flex_regs_len);
        config_length += 3; /* MI_BATCH_BUFFER_START */
        config_length = ALIGN(sizeof(u32) * config_length, I915_GTT_PAGE_SIZE);

        obj = i915_gem_object_create_shmem(stream->perf->i915, config_length);
        if (IS_ERR(obj)) {
                err = PTR_ERR(obj);
                goto err_free;
        }

        cs = i915_gem_object_pin_map(obj, I915_MAP_WB);
        if (IS_ERR(cs)) {
                err = PTR_ERR(cs);
                goto err_oa_bo;
        }

        cs = write_cs_mi_lri(cs,
                             oa_config->mux_regs,
                             oa_config->mux_regs_len);
        cs = write_cs_mi_lri(cs,
                             oa_config->b_counter_regs,
                             oa_config->b_counter_regs_len);
        cs = write_cs_mi_lri(cs,
                             oa_config->flex_regs,
                             oa_config->flex_regs_len);

        /* Jump into the active wait. */
        *cs++ = (INTEL_GEN(stream->perf->i915) < 8 ?
                 MI_BATCH_BUFFER_START :
                 MI_BATCH_BUFFER_START_GEN8);
        *cs++ = i915_ggtt_offset(stream->noa_wait);
        *cs++ = 0;

        i915_gem_object_flush_map(obj);
        i915_gem_object_unpin_map(obj);

        oa_bo->vma = i915_vma_instance(obj,
                                       &stream->engine->gt->ggtt->vm,
                                       NULL);
        if (IS_ERR(oa_bo->vma)) {
                err = PTR_ERR(oa_bo->vma);
                goto err_oa_bo;
        }

        oa_bo->oa_config = i915_oa_config_get(oa_config);
        llist_add(&oa_bo->node, &stream->oa_config_bos);

        return oa_bo;

err_oa_bo:
        i915_gem_object_put(obj);
err_free:
        kfree(oa_bo);
        return ERR_PTR(err);
}

static struct i915_vma *
get_oa_vma(struct i915_perf_stream *stream, struct i915_oa_config *oa_config)
{
        struct i915_oa_config_bo *oa_bo;

        /*
         * Look for the buffer in the already allocated BOs attached
         * to the stream.
         */
        llist_for_each_entry(oa_bo, stream->oa_config_bos.first, node) {
                if (oa_bo->oa_config == oa_config &&
                    memcmp(oa_bo->oa_config->uuid,
                           oa_config->uuid,
                           sizeof(oa_config->uuid)) == 0)
                        goto out;
        }

        oa_bo = alloc_oa_config_buffer(stream, oa_config);
        if (IS_ERR(oa_bo))
                return ERR_CAST(oa_bo);

out:
        return i915_vma_get(oa_bo->vma);
}

static int emit_oa_config(struct i915_perf_stream *stream,
                          struct i915_oa_config *oa_config,
                          struct intel_context *ce)
{
        struct i915_request *rq;
        struct i915_vma *vma;
        int err;

        vma = get_oa_vma(stream, oa_config);
        if (IS_ERR(vma))
                return PTR_ERR(vma);

        err = i915_vma_pin(vma, 0, 0, PIN_GLOBAL | PIN_HIGH);
        if (err)
                goto err_vma_put;

        intel_engine_pm_get(ce->engine);
        rq = i915_request_create(ce);
        intel_engine_pm_put(ce->engine);
        if (IS_ERR(rq)) {
                err = PTR_ERR(rq);
                goto err_vma_unpin;
        }

        i915_vma_lock(vma);
        err = i915_request_await_object(rq, vma->obj, 0);
        if (!err)
                err = i915_vma_move_to_active(vma, rq, 0);
        i915_vma_unlock(vma);
        if (err)
                goto err_add_request;

        err = rq->engine->emit_bb_start(rq,
                                        vma->node.start, 0,
                                        I915_DISPATCH_SECURE);
err_add_request:
        i915_request_add(rq);
err_vma_unpin:
        i915_vma_unpin(vma);
err_vma_put:
        i915_vma_put(vma);
        return err;
}

static struct intel_context *oa_context(struct i915_perf_stream *stream)
{
        return stream->pinned_ctx ?: stream->engine->kernel_context;
}

static int hsw_enable_metric_set(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;

        /*
         * PRM:
         *
         * OA unit is using “crclk” for its functionality. When trunk
         * level clock gating takes place, OA clock would be gated,
         * unable to count the events from non-render clock domain.
         * Render clock gating must be disabled when OA is enabled to
         * count the events from non-render domain. Unit level clock
         * gating for RCS should also be disabled.
         */
        intel_uncore_rmw(uncore, GEN7_MISCCPCTL,
                         GEN7_DOP_CLOCK_GATE_ENABLE, 0);
        intel_uncore_rmw(uncore, GEN6_UCGCTL1,
                         0, GEN6_CSUNIT_CLOCK_GATE_DISABLE);

        return emit_oa_config(stream, stream->oa_config, oa_context(stream));
}

static void hsw_disable_metric_set(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;

        intel_uncore_rmw(uncore, GEN6_UCGCTL1,
                         GEN6_CSUNIT_CLOCK_GATE_DISABLE, 0);
        intel_uncore_rmw(uncore, GEN7_MISCCPCTL,
                         0, GEN7_DOP_CLOCK_GATE_ENABLE);

        intel_uncore_rmw(uncore, GDT_CHICKEN_BITS, GT_NOA_ENABLE, 0);
}

static u32 oa_config_flex_reg(const struct i915_oa_config *oa_config,
                              i915_reg_t reg)
{
        u32 mmio = i915_mmio_reg_offset(reg);
        int i;

        /*
         * This arbitrary default will select the 'EU FPU0 Pipeline
         * Active' event. In the future it's anticipated that there
         * will be an explicit 'No Event' we can select, but not yet...
         */
        if (!oa_config)
                return 0;

        for (i = 0; i < oa_config->flex_regs_len; i++) {
                if (i915_mmio_reg_offset(oa_config->flex_regs[i].addr) == mmio)
                        return oa_config->flex_regs[i].value;
        }

        return 0;
}
/*
 * NB: It must always remain pointer safe to run this even if the OA unit
 * has been disabled.
 *
 * It's fine to put out-of-date values into these per-context registers
 * in the case that the OA unit has been disabled.
 */
static void
gen8_update_reg_state_unlocked(const struct intel_context *ce,
                               const struct i915_perf_stream *stream)
{
        u32 ctx_oactxctrl = stream->perf->ctx_oactxctrl_offset;
        u32 ctx_flexeu0 = stream->perf->ctx_flexeu0_offset;
        /* The MMIO offsets for Flex EU registers aren't contiguous */
        i915_reg_t flex_regs[] = {
                EU_PERF_CNTL0,
                EU_PERF_CNTL1,
                EU_PERF_CNTL2,
                EU_PERF_CNTL3,
                EU_PERF_CNTL4,
                EU_PERF_CNTL5,
                EU_PERF_CNTL6,
        };
        u32 *reg_state = ce->lrc_reg_state;
        int i;

        reg_state[ctx_oactxctrl + 1] =
                (stream->period_exponent << GEN8_OA_TIMER_PERIOD_SHIFT) |
                (stream->periodic ? GEN8_OA_TIMER_ENABLE : 0) |
                GEN8_OA_COUNTER_RESUME;

        for (i = 0; i < ARRAY_SIZE(flex_regs); i++)
                reg_state[ctx_flexeu0 + i * 2 + 1] =
                        oa_config_flex_reg(stream->oa_config, flex_regs[i]);

        reg_state[CTX_R_PWR_CLK_STATE] =
                intel_sseu_make_rpcs(ce->engine->i915, &ce->sseu);
}

struct flex {
        i915_reg_t reg;
        u32 offset;
        u32 value;
};

static int
gen8_store_flex(struct i915_request *rq,
                struct intel_context *ce,
                const struct flex *flex, unsigned int count)
{
        u32 offset;
        u32 *cs;

        cs = intel_ring_begin(rq, 4 * count);
        if (IS_ERR(cs))
                return PTR_ERR(cs);

        offset = i915_ggtt_offset(ce->state) + LRC_STATE_PN * PAGE_SIZE;
        do {
                *cs++ = MI_STORE_DWORD_IMM_GEN4 | MI_USE_GGTT;
                *cs++ = offset + flex->offset * sizeof(u32);
                *cs++ = 0;
                *cs++ = flex->value;
        } while (flex++, --count);

        intel_ring_advance(rq, cs);

        return 0;
}

static int
gen8_load_flex(struct i915_request *rq,
               struct intel_context *ce,
               const struct flex *flex, unsigned int count)
{
        u32 *cs;

        GEM_BUG_ON(!count || count > 63);

        cs = intel_ring_begin(rq, 2 * count + 2);
        if (IS_ERR(cs))
                return PTR_ERR(cs);

        *cs++ = MI_LOAD_REGISTER_IMM(count);
        do {
                *cs++ = i915_mmio_reg_offset(flex->reg);
                *cs++ = flex->value;
        } while (flex++, --count);
        *cs++ = MI_NOOP;

        intel_ring_advance(rq, cs);

        return 0;
}

static int gen8_modify_context(struct intel_context *ce,
                               const struct flex *flex, unsigned int count)
{
        struct i915_request *rq;
        int err;

        rq = intel_engine_create_kernel_request(ce->engine);
        if (IS_ERR(rq))
                return PTR_ERR(rq);

        /* Serialise with the remote context */
        err = intel_context_prepare_remote_request(ce, rq);
        if (err == 0)
                err = gen8_store_flex(rq, ce, flex, count);

        i915_request_add(rq);
        return err;
}

static int gen8_modify_self(struct intel_context *ce,
                            const struct flex *flex, unsigned int count)
{
        struct i915_request *rq;
        int err;

        rq = i915_request_create(ce);
        if (IS_ERR(rq))
                return PTR_ERR(rq);

        err = gen8_load_flex(rq, ce, flex, count);

        i915_request_add(rq);
        return err;
}

static int gen8_configure_context(struct i915_gem_context *ctx,
                                  struct flex *flex, unsigned int count)
{
        struct i915_gem_engines_iter it;
        struct intel_context *ce;
        int err = 0;

        for_each_gem_engine(ce, i915_gem_context_lock_engines(ctx), it) {
                GEM_BUG_ON(ce == ce->engine->kernel_context);

                if (ce->engine->class != RENDER_CLASS)
                        continue;

                /* Otherwise OA settings will be set upon first use */
                if (!intel_context_pin_if_active(ce))
                        continue;

                flex->value = intel_sseu_make_rpcs(ctx->i915, &ce->sseu);
                err = gen8_modify_context(ce, flex, count);

                intel_context_unpin(ce);
                if (err)
                        break;
        }
        i915_gem_context_unlock_engines(ctx);

        return err;
}

static int gen12_configure_oar_context(struct i915_perf_stream *stream, bool enable)
{
        int err;
        struct intel_context *ce = stream->pinned_ctx;
        u32 format = stream->oa_buffer.format;
        struct flex regs_context[] = {
                {
                        GEN8_OACTXCONTROL,
                        stream->perf->ctx_oactxctrl_offset + 1,
                        enable ? GEN8_OA_COUNTER_RESUME : 0,
                },
        };
        /* Offsets in regs_lri are not used since this configuration is only
         * applied using LRI. Initialize the correct offsets for posterity.
         */
#define GEN12_OAR_OACONTROL_OFFSET 0x5B0
        struct flex regs_lri[] = {
                {
                        GEN12_OAR_OACONTROL,
                        GEN12_OAR_OACONTROL_OFFSET + 1,
                        (format << GEN12_OAR_OACONTROL_COUNTER_FORMAT_SHIFT) |
                        (enable ? GEN12_OAR_OACONTROL_COUNTER_ENABLE : 0)
                },
                {
                        RING_CONTEXT_CONTROL(ce->engine->mmio_base),
                        CTX_CONTEXT_CONTROL,
                        _MASKED_FIELD(GEN12_CTX_CTRL_OAR_CONTEXT_ENABLE,
                                      enable ?
                                      GEN12_CTX_CTRL_OAR_CONTEXT_ENABLE :
                                      0)
                },
        };

        /* Modify the context image of pinned context with regs_context*/
        err = intel_context_lock_pinned(ce);
        if (err)
                return err;

        err = gen8_modify_context(ce, regs_context, ARRAY_SIZE(regs_context));
        intel_context_unlock_pinned(ce);
        if (err)
                return err;

        /* Apply regs_lri using LRI with pinned context */
        return gen8_modify_self(ce, regs_lri, ARRAY_SIZE(regs_lri));
}

/*
 * Manages updating the per-context aspects of the OA stream
 * configuration across all contexts.
 *
 * The awkward consideration here is that OACTXCONTROL controls the
 * exponent for periodic sampling which is primarily used for system
 * wide profiling where we'd like a consistent sampling period even in
 * the face of context switches.
 *
 * Our approach of updating the register state context (as opposed to
 * say using a workaround batch buffer) ensures that the hardware
 * won't automatically reload an out-of-date timer exponent even
 * transiently before a WA BB could be parsed.
 *
 * This function needs to:
 * - Ensure the currently running context's per-context OA state is
 *   updated
 * - Ensure that all existing contexts will have the correct per-context
 *   OA state if they are scheduled for use.
 * - Ensure any new contexts will be initialized with the correct
 *   per-context OA state.
 *
 * Note: it's only the RCS/Render context that has any OA state.
 * Note: the first flex register passed must always be R_PWR_CLK_STATE
 */
static int oa_configure_all_contexts(struct i915_perf_stream *stream,
                                     struct flex *regs,
                                     size_t num_regs)
{
        struct drm_i915_private *i915 = stream->perf->i915;
        struct intel_engine_cs *engine;
        struct i915_gem_context *ctx, *cn;
        int err;

        lockdep_assert_held(&stream->perf->lock);

        /*
         * The OA register config is setup through the context image. This image
         * might be written to by the GPU on context switch (in particular on
         * lite-restore). This means we can't safely update a context's image,
         * if this context is scheduled/submitted to run on the GPU.
         *
         * We could emit the OA register config through the batch buffer but
         * this might leave small interval of time where the OA unit is
         * configured at an invalid sampling period.
         *
         * Note that since we emit all requests from a single ring, there
         * is still an implicit global barrier here that may cause a high
         * priority context to wait for an otherwise independent low priority
         * context. Contexts idle at the time of reconfiguration are not
         * trapped behind the barrier.
         */
        spin_lock(&i915->gem.contexts.lock);
        list_for_each_entry_safe(ctx, cn, &i915->gem.contexts.list, link) {
                if (!kref_get_unless_zero(&ctx->ref))
                        continue;

                spin_unlock(&i915->gem.contexts.lock);

                err = gen8_configure_context(ctx, regs, num_regs);
                if (err) {
                        i915_gem_context_put(ctx);
                        return err;
                }

                spin_lock(&i915->gem.contexts.lock);
                list_safe_reset_next(ctx, cn, link);
                i915_gem_context_put(ctx);
        }
        spin_unlock(&i915->gem.contexts.lock);

        /*
         * After updating all other contexts, we need to modify ourselves.
         * If we don't modify the kernel_context, we do not get events while
         * idle.
         */
        for_each_uabi_engine(engine, i915) {
                struct intel_context *ce = engine->kernel_context;

                if (engine->class != RENDER_CLASS)
                        continue;

                regs[0].value = intel_sseu_make_rpcs(i915, &ce->sseu);

                err = gen8_modify_self(ce, regs, num_regs);
                if (err)
                        return err;
        }

        return 0;
}

static int gen12_configure_all_contexts(struct i915_perf_stream *stream,
                                        const struct i915_oa_config *oa_config)
{
        struct flex regs[] = {
                {
                        GEN8_R_PWR_CLK_STATE,
                        CTX_R_PWR_CLK_STATE,
                },
        };

        return oa_configure_all_contexts(stream, regs, ARRAY_SIZE(regs));
}

static int lrc_configure_all_contexts(struct i915_perf_stream *stream,
                                      const struct i915_oa_config *oa_config)
{
        /* The MMIO offsets for Flex EU registers aren't contiguous */
        const u32 ctx_flexeu0 = stream->perf->ctx_flexeu0_offset;
#define ctx_flexeuN(N) (ctx_flexeu0 + 2 * (N) + 1)
        struct flex regs[] = {
                {
                        GEN8_R_PWR_CLK_STATE,
                        CTX_R_PWR_CLK_STATE,
                },
                {
                        GEN8_OACTXCONTROL,
                        stream->perf->ctx_oactxctrl_offset + 1,
                },
                { EU_PERF_CNTL0, ctx_flexeuN(0) },
                { EU_PERF_CNTL1, ctx_flexeuN(1) },
                { EU_PERF_CNTL2, ctx_flexeuN(2) },
                { EU_PERF_CNTL3, ctx_flexeuN(3) },
                { EU_PERF_CNTL4, ctx_flexeuN(4) },
                { EU_PERF_CNTL5, ctx_flexeuN(5) },
                { EU_PERF_CNTL6, ctx_flexeuN(6) },
        };
#undef ctx_flexeuN
        int i;

        regs[1].value =
                (stream->period_exponent << GEN8_OA_TIMER_PERIOD_SHIFT) |
                (stream->periodic ? GEN8_OA_TIMER_ENABLE : 0) |
                GEN8_OA_COUNTER_RESUME;

        for (i = 2; i < ARRAY_SIZE(regs); i++)
                regs[i].value = oa_config_flex_reg(oa_config, regs[i].reg);

        return oa_configure_all_contexts(stream, regs, ARRAY_SIZE(regs));
}

static int gen8_enable_metric_set(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;
        struct i915_oa_config *oa_config = stream->oa_config;
        int ret;

        /*
         * We disable slice/unslice clock ratio change reports on SKL since
         * they are too noisy. The HW generates a lot of redundant reports
         * where the ratio hasn't really changed causing a lot of redundant
         * work to processes and increasing the chances we'll hit buffer
         * overruns.
         *
         * Although we don't currently use the 'disable overrun' OABUFFER
         * feature it's worth noting that clock ratio reports have to be
         * disabled before considering to use that feature since the HW doesn't
         * correctly block these reports.
         *
         * Currently none of the high-level metrics we have depend on knowing
         * this ratio to normalize.
         *
         * Note: This register is not power context saved and restored, but
         * that's OK considering that we disable RC6 while the OA unit is
         * enabled.
         *
         * The _INCLUDE_CLK_RATIO bit allows the slice/unslice frequency to
         * be read back from automatically triggered reports, as part of the
         * RPT_ID field.
         */
        if (IS_GEN_RANGE(stream->perf->i915, 9, 11)) {
                intel_uncore_write(uncore, GEN8_OA_DEBUG,
                                   _MASKED_BIT_ENABLE(GEN9_OA_DEBUG_DISABLE_CLK_RATIO_REPORTS |
                                                      GEN9_OA_DEBUG_INCLUDE_CLK_RATIO));
        }

        /*
         * Update all contexts prior writing the mux configurations as we need
         * to make sure all slices/subslices are ON before writing to NOA
         * registers.
         */
        ret = lrc_configure_all_contexts(stream, oa_config);
        if (ret)
                return ret;

        return emit_oa_config(stream, oa_config, oa_context(stream));
}

static u32 oag_report_ctx_switches(const struct i915_perf_stream *stream)
{
        return _MASKED_FIELD(GEN12_OAG_OA_DEBUG_DISABLE_CTX_SWITCH_REPORTS,
                             (stream->sample_flags & SAMPLE_OA_REPORT) ?
                             0 : GEN12_OAG_OA_DEBUG_DISABLE_CTX_SWITCH_REPORTS);
}

static int gen12_enable_metric_set(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;
        struct i915_oa_config *oa_config = stream->oa_config;
        bool periodic = stream->periodic;
        u32 period_exponent = stream->period_exponent;
        int ret;

        intel_uncore_write(uncore, GEN12_OAG_OA_DEBUG,
                           /* Disable clk ratio reports, like previous Gens. */
                           _MASKED_BIT_ENABLE(GEN12_OAG_OA_DEBUG_DISABLE_CLK_RATIO_REPORTS |
                                              GEN12_OAG_OA_DEBUG_INCLUDE_CLK_RATIO) |
                           /*
                            * If the user didn't require OA reports, instruct
                            * the hardware not to emit ctx switch reports.
                            */
                           oag_report_ctx_switches(stream));

        intel_uncore_write(uncore, GEN12_OAG_OAGLBCTXCTRL, periodic ?
                           (GEN12_OAG_OAGLBCTXCTRL_COUNTER_RESUME |
                            GEN12_OAG_OAGLBCTXCTRL_TIMER_ENABLE |
                            (period_exponent << GEN12_OAG_OAGLBCTXCTRL_TIMER_PERIOD_SHIFT))
                            : 0);

        /*
         * Update all contexts prior writing the mux configurations as we need
         * to make sure all slices/subslices are ON before writing to NOA
         * registers.
         */
        ret = gen12_configure_all_contexts(stream, oa_config);
        if (ret)
                return ret;

        /*
         * For Gen12, performance counters are context
         * saved/restored. Only enable it for the context that
         * requested this.
         */
        if (stream->ctx) {
                ret = gen12_configure_oar_context(stream, true);
                if (ret)
                        return ret;
        }

        return emit_oa_config(stream, oa_config, oa_context(stream));
}

static void gen8_disable_metric_set(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;

        /* Reset all contexts' slices/subslices configurations. */
        lrc_configure_all_contexts(stream, NULL);

        intel_uncore_rmw(uncore, GDT_CHICKEN_BITS, GT_NOA_ENABLE, 0);
}

static void gen10_disable_metric_set(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;

        /* Reset all contexts' slices/subslices configurations. */
        lrc_configure_all_contexts(stream, NULL);

        /* Make sure we disable noa to save power. */
        intel_uncore_rmw(uncore, RPM_CONFIG1, GEN10_GT_NOA_ENABLE, 0);
}

static void gen12_disable_metric_set(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;

        /* Reset all contexts' slices/subslices configurations. */
        gen12_configure_all_contexts(stream, NULL);

        /* disable the context save/restore or OAR counters */
        if (stream->ctx)
                gen12_configure_oar_context(stream, false);

        /* Make sure we disable noa to save power. */
        intel_uncore_rmw(uncore, RPM_CONFIG1, GEN10_GT_NOA_ENABLE, 0);
}

static void gen7_oa_enable(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;
        struct i915_gem_context *ctx = stream->ctx;
        u32 ctx_id = stream->specific_ctx_id;
        bool periodic = stream->periodic;
        u32 period_exponent = stream->period_exponent;
        u32 report_format = stream->oa_buffer.format;

        /*
         * Reset buf pointers so we don't forward reports from before now.
         *
         * Think carefully if considering trying to avoid this, since it
         * also ensures status flags and the buffer itself are cleared
         * in error paths, and we have checks for invalid reports based
         * on the assumption that certain fields are written to zeroed
         * memory which this helps maintains.
         */
        gen7_init_oa_buffer(stream);

        intel_uncore_write(uncore, GEN7_OACONTROL,
                           (ctx_id & GEN7_OACONTROL_CTX_MASK) |
                           (period_exponent <<
                            GEN7_OACONTROL_TIMER_PERIOD_SHIFT) |
                           (periodic ? GEN7_OACONTROL_TIMER_ENABLE : 0) |
                           (report_format << GEN7_OACONTROL_FORMAT_SHIFT) |
                           (ctx ? GEN7_OACONTROL_PER_CTX_ENABLE : 0) |
                           GEN7_OACONTROL_ENABLE);
}

static void gen8_oa_enable(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;
        u32 report_format = stream->oa_buffer.format;

        /*
         * Reset buf pointers so we don't forward reports from before now.
         *
         * Think carefully if considering trying to avoid this, since it
         * also ensures status flags and the buffer itself are cleared
         * in error paths, and we have checks for invalid reports based
         * on the assumption that certain fields are written to zeroed
         * memory which this helps maintains.
         */
        gen8_init_oa_buffer(stream);

        /*
         * Note: we don't rely on the hardware to perform single context
         * filtering and instead filter on the cpu based on the context-id
         * field of reports
         */
        intel_uncore_write(uncore, GEN8_OACONTROL,
                           (report_format << GEN8_OA_REPORT_FORMAT_SHIFT) |
                           GEN8_OA_COUNTER_ENABLE);
}

static void gen12_oa_enable(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;
        u32 report_format = stream->oa_buffer.format;

        /*
         * If we don't want OA reports from the OA buffer, then we don't even
         * need to program the OAG unit.
         */
        if (!(stream->sample_flags & SAMPLE_OA_REPORT))
                return;

        gen12_init_oa_buffer(stream);

        intel_uncore_write(uncore, GEN12_OAG_OACONTROL,
                           (report_format << GEN12_OAG_OACONTROL_OA_COUNTER_FORMAT_SHIFT) |
                           GEN12_OAG_OACONTROL_OA_COUNTER_ENABLE);
}

/**
 * i915_oa_stream_enable - handle `I915_PERF_IOCTL_ENABLE` for OA stream
 * @stream: An i915 perf stream opened for OA metrics
 *
 * [Re]enables hardware periodic sampling according to the period configured
 * when opening the stream. This also starts a hrtimer that will periodically
 * check for data in the circular OA buffer for notifying userspace (e.g.
 * during a read() or poll()).
 */
static void i915_oa_stream_enable(struct i915_perf_stream *stream)
{
        stream->perf->ops.oa_enable(stream);

        if (stream->periodic)
                hrtimer_start(&stream->poll_check_timer,
                              ns_to_ktime(POLL_PERIOD),
                              HRTIMER_MODE_REL_PINNED);
}

static void gen7_oa_disable(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;

        intel_uncore_write(uncore, GEN7_OACONTROL, 0);
        if (intel_wait_for_register(uncore,
                                    GEN7_OACONTROL, GEN7_OACONTROL_ENABLE, 0,
                                    50))
                DRM_ERROR("wait for OA to be disabled timed out\n");
}

static void gen8_oa_disable(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;

        intel_uncore_write(uncore, GEN8_OACONTROL, 0);
        if (intel_wait_for_register(uncore,
                                    GEN8_OACONTROL, GEN8_OA_COUNTER_ENABLE, 0,
                                    50))
                DRM_ERROR("wait for OA to be disabled timed out\n");
}

static void gen12_oa_disable(struct i915_perf_stream *stream)
{
        struct intel_uncore *uncore = stream->uncore;

        intel_uncore_write(uncore, GEN12_OAG_OACONTROL, 0);
        if (intel_wait_for_register(uncore,
                                    GEN12_OAG_OACONTROL,
                                    GEN12_OAG_OACONTROL_OA_COUNTER_ENABLE, 0,
                                    50))
                DRM_ERROR("wait for OA to be disabled timed out\n");
}

/**
 * i915_oa_stream_disable - handle `I915_PERF_IOCTL_DISABLE` for OA stream
 * @stream: An i915 perf stream opened for OA metrics
 *
 * Stops the OA unit from periodically writing counter reports into the
 * circular OA buffer. This also stops the hrtimer that periodically checks for
 * data in the circular OA buffer, for notifying userspace.
 */
static void i915_oa_stream_disable(struct i915_perf_stream *stream)
{
        stream->perf->ops.oa_disable(stream);

        if (stream->periodic)
                hrtimer_cancel(&stream->poll_check_timer);
}

static const struct i915_perf_stream_ops i915_oa_stream_ops = {
        .destroy = i915_oa_stream_destroy,
        .enable = i915_oa_stream_enable,
        .disable = i915_oa_stream_disable,
        .wait_unlocked = i915_oa_wait_unlocked,
        .poll_wait = i915_oa_poll_wait,
        .read = i915_oa_read,
};

/**
 * i915_oa_stream_init - validate combined props for OA stream and init
 * @stream: An i915 perf stream
 * @param: The open parameters passed to `DRM_I915_PERF_OPEN`
 * @props: The property state that configures stream (individually validated)
 *
 * While read_properties_unlocked() validates properties in isolation it
 * doesn't ensure that the combination necessarily makes sense.
 *
 * At this point it has been determined that userspace wants a stream of
 * OA metrics, but still we need to further validate the combined
 * properties are OK.
 *
 * If the configuration makes sense then we can allocate memory for
 * a circular OA buffer and apply the requested metric set configuration.
 *
 * Returns: zero on success or a negative error code.
 */
static int i915_oa_stream_init(struct i915_perf_stream *stream,
                               struct drm_i915_perf_open_param *param,
                               struct perf_open_properties *props)
{
        struct i915_perf *perf = stream->perf;
        int format_size;
        int ret;

        if (!props->engine) {
                DRM_DEBUG("OA engine not specified\n");
                return -EINVAL;
        }

        /*
         * If the sysfs metrics/ directory wasn't registered for some
         * reason then don't let userspace try their luck with config
         * IDs
         */
        if (!perf->metrics_kobj) {
                DRM_DEBUG("OA metrics weren't advertised via sysfs\n");
                return -EINVAL;
        }

        if (!(props->sample_flags & SAMPLE_OA_REPORT) &&
            (INTEL_GEN(perf->i915) < 12 || !stream->ctx)) {
                DRM_DEBUG("Only OA report sampling supported\n");
                return -EINVAL;
        }

        if (!perf->ops.enable_metric_set) {
                DRM_DEBUG("OA unit not supported\n");
                return -ENODEV;
        }

        /*
         * To avoid the complexity of having to accurately filter
         * counter reports and marshal to the appropriate client
         * we currently only allow exclusive access
         */
        if (perf->exclusive_stream) {
                DRM_DEBUG("OA unit already in use\n");
                return -EBUSY;
        }

        if (!props->oa_format) {
                DRM_DEBUG("OA report format not specified\n");
                return -EINVAL;
        }

        stream->engine = props->engine;
        stream->uncore = stream->engine->gt->uncore;

        stream->sample_size = sizeof(struct drm_i915_perf_record_header);

        format_size = perf->oa_formats[props->oa_format].size;

        stream->sample_flags = props->sample_flags;
        stream->sample_size += format_size;

        stream->oa_buffer.format_size = format_size;
        if (WARN_ON(stream->oa_buffer.format_size == 0))
                return -EINVAL;

        stream->hold_preemption = props->hold_preemption;

        stream->oa_buffer.format =
                perf->oa_formats[props->oa_format].format;

        stream->periodic = props->oa_periodic;
        if (stream->periodic)
                stream->period_exponent = props->oa_period_exponent;

        if (stream->ctx) {
                ret = oa_get_render_ctx_id(stream);
                if (ret) {
                        DRM_DEBUG("Invalid context id to filter with\n");
                        return ret;
                }
        }

        ret = alloc_noa_wait(stream);
        if (ret) {
                DRM_DEBUG("Unable to allocate NOA wait batch buffer\n");
                goto err_noa_wait_alloc;
        }

        stream->oa_config = i915_perf_get_oa_config(perf, props->metrics_set);
        if (!stream->oa_config) {
                DRM_DEBUG("Invalid OA config id=%i\n", props->metrics_set);
                ret = -EINVAL;
                goto err_config;
        }

        /* PRM - observability performance counters:
         *
         *   OACONTROL, performance counter enable, note:
         *
         *   "When this bit is set, in order to have coherent counts,
         *   RC6 power state and trunk clock gating must be disabled.
         *   This can be achieved by programming MMIO registers as
         *   0xA094=0 and 0xA090[31]=1"
         *
         *   In our case we are expecting that taking pm + FORCEWAKE
         *   references will effectively disable RC6.
         */
        intel_engine_pm_get(stream->engine);
        intel_uncore_forcewake_get(stream->uncore, FORCEWAKE_ALL);

        ret = alloc_oa_buffer(stream);
        if (ret)
                goto err_oa_buf_alloc;

        stream->ops = &i915_oa_stream_ops;
        perf->exclusive_stream = stream;

        ret = perf->ops.enable_metric_set(stream);
        if (ret) {
                DRM_DEBUG("Unable to enable metric set\n");
                goto err_enable;
        }

        DRM_DEBUG("opening stream oa config uuid=%s\n",
                  stream->oa_config->uuid);

        hrtimer_init(&stream->poll_check_timer,
                     CLOCK_MONOTONIC, HRTIMER_MODE_REL);
        stream->poll_check_timer.function = oa_poll_check_timer_cb;
        init_waitqueue_head(&stream->poll_wq);
        spin_lock_init(&stream->oa_buffer.ptr_lock);

        return 0;

err_enable:
        perf->exclusive_stream = NULL;
        perf->ops.disable_metric_set(stream);

        free_oa_buffer(stream);

err_oa_buf_alloc:
        free_oa_configs(stream);

        intel_uncore_forcewake_put(stream->uncore, FORCEWAKE_ALL);
        intel_engine_pm_put(stream->engine);

err_config:
        free_noa_wait(stream);

err_noa_wait_alloc:
        if (stream->ctx)
                oa_put_render_ctx_id(stream);

        return ret;
}

void i915_oa_init_reg_state(const struct intel_context *ce,
                            const struct intel_engine_cs *engine)
{
        struct i915_perf_stream *stream;

        /* perf.exclusive_stream serialised by lrc_configure_all_contexts() */

        if (engine->class != RENDER_CLASS)
                return;

        stream = engine->i915->perf.exclusive_stream;
        /*
         * For gen12, only CTX_R_PWR_CLK_STATE needs update, but the caller
         * is already doing that, so nothing to be done for gen12 here.
         */
        if (stream && INTEL_GEN(stream->perf->i915) < 12)
                gen8_update_reg_state_unlocked(ce, stream);
}

/**
 * i915_perf_read_locked - &i915_perf_stream_ops->read with error normalisation
 * @stream: An i915 perf stream
 * @file: An i915 perf stream file
 * @buf: destination buffer given by userspace
 * @count: the number of bytes userspace wants to read
 * @ppos: (inout) file seek position (unused)
 *
 * Besides wrapping &i915_perf_stream_ops->read this provides a common place to
 * ensure that if we've successfully copied any data then reporting that takes
 * precedence over any internal error status, so the data isn't lost.
 *
 * For example ret will be -ENOSPC whenever there is more buffered data than
 * can be copied to userspace, but that's only interesting if we weren't able
 * to copy some data because it implies the userspace buffer is too small to
 * receive a single record (and we never split records).
 *
 * Another case with ret == -EFAULT is more of a grey area since it would seem
 * like bad form for userspace to ask us to overrun its buffer, but the user
 * knows best:
 *
 *   http://yarchive.net/comp/linux/partial_reads_writes.html
 *
 * Returns: The number of bytes copied or a negative error code on failure.
 */
static ssize_t i915_perf_read_locked(struct i915_perf_stream *stream,
                                     struct file *file,
                                     char __user *buf,
                                     size_t count,
                                     loff_t *ppos)
{
        /* Note we keep the offset (aka bytes read) separate from any
         * error status so that the final check for whether we return
         * the bytes read with a higher precedence than any error (see
         * comment below) doesn't need to be handled/duplicated in
         * stream->ops->read() implementations.
         */
        size_t offset = 0;
        int ret = stream->ops->read(stream, buf, count, &offset);

        return offset ?: (ret ?: -EAGAIN);
}

/**
 * i915_perf_read - handles read() FOP for i915 perf stream FDs
 * @file: An i915 perf stream file
 * @buf: destination buffer given by userspace
 * @count: the number of bytes userspace wants to read
 * @ppos: (inout) file seek position (unused)
 *
 * The entry point for handling a read() on a stream file descriptor from
 * userspace. Most of the work is left to the i915_perf_read_locked() and
 * &i915_perf_stream_ops->read but to save having stream implementations (of
 * which we might have multiple later) we handle blocking read here.
 *
 * We can also consistently treat trying to read from a disabled stream
 * as an IO error so implementations can assume the stream is enabled
 * while reading.
 *
 * Returns: The number of bytes copied or a negative error code on failure.
 */
static ssize_t i915_perf_read(struct file *file,
                              char __user *buf,
                              size_t count,
                              loff_t *ppos)
{
        struct i915_perf_stream *stream = file->private_data;
        struct i915_perf *perf = stream->perf;
        ssize_t ret;

        /* To ensure it's handled consistently we simply treat all reads of a
         * disabled stream as an error. In particular it might otherwise lead
         * to a deadlock for blocking file descriptors...
         */
        if (!stream->enabled)
                return -EIO;

        if (!(file->f_flags & O_NONBLOCK)) {
                /* There's the small chance of false positives from
                 * stream->ops->wait_unlocked.
                 *
                 * E.g. with single context filtering since we only wait until
                 * oabuffer has >= 1 report we don't immediately know whether
                 * any reports really belong to the current context
                 */
                do {
                        ret = stream->ops->wait_unlocked(stream);
                        if (ret)
                                return ret;

                        mutex_lock(&perf->lock);
                        ret = i915_perf_read_locked(stream, file,
                                                    buf, count, ppos);
                        mutex_unlock(&perf->lock);
                } while (ret == -EAGAIN);
        } else {
                mutex_lock(&perf->lock);
                ret = i915_perf_read_locked(stream, file, buf, count, ppos);
                mutex_unlock(&perf->lock);
        }

        /* We allow the poll checking to sometimes report false positive EPOLLIN
         * events where we might actually report EAGAIN on read() if there's
         * not really any data available. In this situation though we don't
         * want to enter a busy loop between poll() reporting a EPOLLIN event
         * and read() returning -EAGAIN. Clearing the oa.pollin state here
         * effectively ensures we back off until the next hrtimer callback
         * before reporting another EPOLLIN event.
         */
        if (ret >= 0 || ret == -EAGAIN) {
                /* Maybe make ->pollin per-stream state if we support multiple
                 * concurrent streams in the future.
                 */
                stream->pollin = false;
        }

        return ret;
}

static enum hrtimer_restart oa_poll_check_timer_cb(struct hrtimer *hrtimer)
{
        struct i915_perf_stream *stream =
                container_of(hrtimer, typeof(*stream), poll_check_timer);

        if (oa_buffer_check_unlocked(stream)) {
                stream->pollin = true;
                wake_up(&stream->poll_wq);
        }

        hrtimer_forward_now(hrtimer, ns_to_ktime(POLL_PERIOD));

        return HRTIMER_RESTART;
}

/**
 * i915_perf_poll_locked - poll_wait() with a suitable wait queue for stream
 * @stream: An i915 perf stream
 * @file: An i915 perf stream file
 * @wait: poll() state table
 *
 * For handling userspace polling on an i915 perf stream, this calls through to
 * &i915_perf_stream_ops->poll_wait to call poll_wait() with a wait queue that
 * will be woken for new stream data.
 *
 * Note: The &perf->lock mutex has been taken to serialize
 * with any non-file-operation driver hooks.
 *
 * Returns: any poll events that are ready without sleeping
 */
static __poll_t i915_perf_poll_locked(struct i915_perf_stream *stream,
                                      struct file *file,
                                      poll_table *wait)
{
        __poll_t events = 0;

        stream->ops->poll_wait(stream, file, wait);

        /* Note: we don't explicitly check whether there's something to read
         * here since this path may be very hot depending on what else
         * userspace is polling, or on the timeout in use. We rely solely on
         * the hrtimer/oa_poll_check_timer_cb to notify us when there are
         * samples to read.
         */
        if (stream->pollin)
                events |= EPOLLIN;

        return events;
}

/**
 * i915_perf_poll - call poll_wait() with a suitable wait queue for stream
 * @file: An i915 perf stream file
 * @wait: poll() state table
 *
 * For handling userspace polling on an i915 perf stream, this ensures
 * poll_wait() gets called with a wait queue that will be woken for new stream
 * data.
 *
 * Note: Implementation deferred to i915_perf_poll_locked()
 *
 * Returns: any poll events that are ready without sleeping
 */
static __poll_t i915_perf_poll(struct file *file, poll_table *wait)
{
        struct i915_perf_stream *stream = file->private_data;
        struct i915_perf *perf = stream->perf;
        __poll_t ret;

        mutex_lock(&perf->lock);
        ret = i915_perf_poll_locked(stream, file, wait);
        mutex_unlock(&perf->lock);

        return ret;
}

/**
 * i915_perf_enable_locked - handle `I915_PERF_IOCTL_ENABLE` ioctl
 * @stream: A disabled i915 perf stream
 *
 * [Re]enables the associated capture of data for this stream.
 *
 * If a stream was previously enabled then there's currently no intention
 * to provide userspace any guarantee about the preservation of previously
 * buffered data.
 */
static void i915_perf_enable_locked(struct i915_perf_stream *stream)
{
        if (stream->enabled)
                return;

        /* Allow stream->ops->enable() to refer to this */
        stream->enabled = true;

        if (stream->ops->enable)
                stream->ops->enable(stream);

        if (stream->hold_preemption)
                intel_context_set_nopreempt(stream->pinned_ctx);
}

/**
 * i915_perf_disable_locked - handle `I915_PERF_IOCTL_DISABLE` ioctl
 * @stream: An enabled i915 perf stream
 *
 * Disables the associated capture of data for this stream.
 *
 * The intention is that disabling an re-enabling a stream will ideally be
 * cheaper than destroying and re-opening a stream with the same configuration,
 * though there are no formal guarantees about what state or buffered data
 * must be retained between disabling and re-enabling a stream.
 *
 * Note: while a stream is disabled it's considered an error for userspace
 * to attempt to read from the stream (-EIO).
 */
static void i915_perf_disable_locked(struct i915_perf_stream *stream)
{
        if (!stream->enabled)
                return;

        /* Allow stream->ops->disable() to refer to this */
        stream->enabled = false;

        if (stream->hold_preemption)
                intel_context_clear_nopreempt(stream->pinned_ctx);

        if (stream->ops->disable)
                stream->ops->disable(stream);
}

static long i915_perf_config_locked(struct i915_perf_stream *stream,
                                    unsigned long metrics_set)
{
        struct i915_oa_config *config;
        long ret = stream->oa_config->id;

        config = i915_perf_get_oa_config(stream->perf, metrics_set);
        if (!config)
                return -EINVAL;

        if (config != stream->oa_config) {
                int err;

                /*
                 * If OA is bound to a specific context, emit the
                 * reconfiguration inline from that context. The update
                 * will then be ordered with respect to submission on that
                 * context.
                 *
                 * When set globally, we use a low priority kernel context,
                 * so it will effectively take effect when idle.
                 */
                err = emit_oa_config(stream, config, oa_context(stream));
                if (err == 0)
                        config = xchg(&stream->oa_config, config);
                else
                        ret = err;
        }

        i915_oa_config_put(config);

        return ret;
}

/**
 * i915_perf_ioctl - support ioctl() usage with i915 perf stream FDs
 * @stream: An i915 perf stream
 * @cmd: the ioctl request
 * @arg: the ioctl data
 *
 * Note: The &perf->lock mutex has been taken to serialize
 * with any non-file-operation driver hooks.
 *
 * Returns: zero on success or a negative error code. Returns -EINVAL for
 * an unknown ioctl request.
 */
static long i915_perf_ioctl_locked(struct i915_perf_stream *stream,
                                   unsigned int cmd,
                                   unsigned long arg)
{
        switch (cmd) {
        case I915_PERF_IOCTL_ENABLE:
                i915_perf_enable_locked(stream);
                return 0;
        case I915_PERF_IOCTL_DISABLE:
                i915_perf_disable_locked(stream);
                return 0;
        case I915_PERF_IOCTL_CONFIG:
                return i915_perf_config_locked(stream, arg);
        }

        return -EINVAL;
}

/**
 * i915_perf_ioctl - support ioctl() usage with i915 perf stream FDs
 * @file: An i915 perf stream file
 * @cmd: the ioctl request
 * @arg: the ioctl data
 *
 * Implementation deferred to i915_perf_ioctl_locked().
 *
 * Returns: zero on success or a negative error code. Returns -EINVAL for
 * an unknown ioctl request.
 */
static long i915_perf_ioctl(struct file *file,
                            unsigned int cmd,
                            unsigned long arg)
{
        struct i915_perf_stream *stream = file->private_data;
        struct i915_perf *perf = stream->perf;
        long ret;

        mutex_lock(&perf->lock);
        ret = i915_perf_ioctl_locked(stream, cmd, arg);
        mutex_unlock(&perf->lock);

        return ret;
}

/**
 * i915_perf_destroy_locked - destroy an i915 perf stream
 * @stream: An i915 perf stream
 *
 * Frees all resources associated with the given i915 perf @stream, disabling
 * any associated data capture in the process.
 *
 * Note: The &perf->lock mutex has been taken to serialize
 * with any non-file-operation driver hooks.
 */
static void i915_perf_destroy_locked(struct i915_perf_stream *stream)
{
        if (stream->enabled)
                i915_perf_disable_locked(stream);

        if (stream->ops->destroy)
                stream->ops->destroy(stream);

        if (stream->ctx)
                i915_gem_context_put(stream->ctx);

        kfree(stream);
}

/**
 * i915_perf_release - handles userspace close() of a stream file
 * @inode: anonymous inode associated with file
 * @file: An i915 perf stream file
 *
 * Cleans up any resources associated with an open i915 perf stream file.
 *
 * NB: close() can't really fail from the userspace point of view.
 *
 * Returns: zero on success or a negative error code.
 */
static int i915_perf_release(struct inode *inode, struct file *file)
{
        struct i915_perf_stream *stream = file->private_data;
        struct i915_perf *perf = stream->perf;

        mutex_lock(&perf->lock);
        i915_perf_destroy_locked(stream);
        mutex_unlock(&perf->lock);

        /* Release the reference the perf stream kept on the driver. */
        drm_dev_put(&perf->i915->drm);

        return 0;
}


static const struct file_operations fops = {
        .owner          = THIS_MODULE,
        .llseek         = no_llseek,
        .release        = i915_perf_release,
        .poll           = i915_perf_poll,
        .read           = i915_perf_read,
        .unlocked_ioctl = i915_perf_ioctl,
        /* Our ioctl have no arguments, so it's safe to use the same function
         * to handle 32bits compatibility.
         */
        .compat_ioctl   = i915_perf_ioctl,
};


/**
 * i915_perf_open_ioctl_locked - DRM ioctl() for userspace to open a stream FD
 * @perf: i915 perf instance
 * @param: The open parameters passed to 'DRM_I915_PERF_OPEN`
 * @props: individually validated u64 property value pairs
 * @file: drm file
 *
 * See i915_perf_ioctl_open() for interface details.
 *
 * Implements further stream config validation and stream initialization on
 * behalf of i915_perf_open_ioctl() with the &perf->lock mutex
 * taken to serialize with any non-file-operation driver hooks.
 *
 * Note: at this point the @props have only been validated in isolation and
 * it's still necessary to validate that the combination of properties makes
 * sense.
 *
 * In the case where userspace is interested in OA unit metrics then further
 * config validation and stream initialization details will be handled by
 * i915_oa_stream_init(). The code here should only validate config state that
 * will be relevant to all stream types / backends.
 *
 * Returns: zero on success or a negative error code.
 */
static int
i915_perf_open_ioctl_locked(struct i915_perf *perf,
                            struct drm_i915_perf_open_param *param,
                            struct perf_open_properties *props,
                            struct drm_file *file)
{
        struct i915_gem_context *specific_ctx = NULL;
        struct i915_perf_stream *stream = NULL;
        unsigned long f_flags = 0;
        bool privileged_op = true;
        int stream_fd;
        int ret;

        if (props->single_context) {
                u32 ctx_handle = props->ctx_handle;
                struct drm_i915_file_private *file_priv = file->driver_priv;

                specific_ctx = i915_gem_context_lookup(file_priv, ctx_handle);
                if (!specific_ctx) {
                        DRM_DEBUG("Failed to look up context with ID %u for opening perf stream\n",
                                  ctx_handle);
                        ret = -ENOENT;
                        goto err;
                }
        }

        /*
         * On Haswell the OA unit supports clock gating off for a specific
         * context and in this mode there's no visibility of metrics for the
         * rest of the system, which we consider acceptable for a
         * non-privileged client.
         *
         * For Gen8->11 the OA unit no longer supports clock gating off for a
         * specific context and the kernel can't securely stop the counters
         * from updating as system-wide / global values. Even though we can
         * filter reports based on the included context ID we can't block
         * clients from seeing the raw / global counter values via
         * MI_REPORT_PERF_COUNT commands and so consider it a privileged op to
         * enable the OA unit by default.
         *
         * For Gen12+ we gain a new OAR unit that only monitors the RCS on a
         * per context basis. So we can relax requirements there if the user
         * doesn't request global stream access (i.e. query based sampling
         * using MI_RECORD_PERF_COUNT.
         */
        if (IS_HASWELL(perf->i915) && specific_ctx)
                privileged_op = false;
        else if (IS_GEN(perf->i915, 12) && specific_ctx &&
                 (props->sample_flags & SAMPLE_OA_REPORT) == 0)
                privileged_op = false;

        if (props->hold_preemption) {
                if (!props->single_context) {
                        DRM_DEBUG("preemption disable with no context\n");
                        ret = -EINVAL;
                        goto err;
                }
                privileged_op = true;
        }

        /* Similar to perf's kernel.perf_paranoid_cpu sysctl option
         * we check a dev.i915.perf_stream_paranoid sysctl option
         * to determine if it's ok to access system wide OA counters
         * without CAP_SYS_ADMIN privileges.
         */
        if (privileged_op &&
            i915_perf_stream_paranoid && !capable(CAP_SYS_ADMIN)) {
                DRM_DEBUG("Insufficient privileges to open i915 perf stream\n");
                ret = -EACCES;
                goto err_ctx;
        }

        stream = kzalloc(sizeof(*stream), GFP_KERNEL);
        if (!stream) {
                ret = -ENOMEM;
                goto err_ctx;
        }

        stream->perf = perf;
        stream->ctx = specific_ctx;

        ret = i915_oa_stream_init(stream, param, props);
        if (ret)
                goto err_alloc;

        /* we avoid simply assigning stream->sample_flags = props->sample_flags
         * to have _stream_init check the combination of sample flags more
         * thoroughly, but still this is the expected result at this point.
         */
        if (WARN_ON(stream->sample_flags != props->sample_flags)) {
                ret = -ENODEV;
                goto err_flags;
        }

        if (param->flags & I915_PERF_FLAG_FD_CLOEXEC)
                f_flags |= O_CLOEXEC;
        if (param->flags & I915_PERF_FLAG_FD_NONBLOCK)
                f_flags |= O_NONBLOCK;

        stream_fd = anon_inode_getfd("[i915_perf]", &fops, stream, f_flags);
        if (stream_fd < 0) {
                ret = stream_fd;
                goto err_flags;
        }

        if (!(param->flags & I915_PERF_FLAG_DISABLED))
                i915_perf_enable_locked(stream);

        /* Take a reference on the driver that will be kept with stream_fd
         * until its release.
         */
        drm_dev_get(&perf->i915->drm);

        return stream_fd;

err_flags:
        if (stream->ops->destroy)
                stream->ops->destroy(stream);
err_alloc:
        kfree(stream);
err_ctx:
        if (specific_ctx)
                i915_gem_context_put(specific_ctx);
err:
        return ret;
}

static u64 oa_exponent_to_ns(struct i915_perf *perf, int exponent)
{
        return div64_u64(1000000000ULL * (2ULL << exponent),
                         1000ULL * RUNTIME_INFO(perf->i915)->cs_timestamp_frequency_khz);
}

/**
 * read_properties_unlocked - validate + copy userspace stream open properties
 * @perf: i915 perf instance
 * @uprops: The array of u64 key value pairs given by userspace
 * @n_props: The number of key value pairs expected in @uprops
 * @props: The stream configuration built up while validating properties
 *
 * Note this function only validates properties in isolation it doesn't
 * validate that the combination of properties makes sense or that all
 * properties necessary for a particular kind of stream have been set.
 *
 * Note that there currently aren't any ordering requirements for properties so
 * we shouldn't validate or assume anything about ordering here. This doesn't
 * rule out defining new properties with ordering requirements in the future.
 */
static int read_properties_unlocked(struct i915_perf *perf,
                                    u64 __user *uprops,
                                    u32 n_props,
                                    struct perf_open_properties *props)
{
        u64 __user *uprop = uprops;
        u32 i;

        memset(props, 0, sizeof(struct perf_open_properties));

        if (!n_props) {
                DRM_DEBUG("No i915 perf properties given\n");
                return -EINVAL;
        }

        /* At the moment we only support using i915-perf on the RCS. */
        props->engine = intel_engine_lookup_user(perf->i915,
                                                 I915_ENGINE_CLASS_RENDER,
                                                 0);
        if (!props->engine) {
                DRM_DEBUG("No RENDER-capable engines\n");
                return -EINVAL;
        }

        /* Considering that ID = 0 is reserved and assuming that we don't
         * (currently) expect any configurations to ever specify duplicate
         * values for a particular property ID then the last _PROP_MAX value is
         * one greater than the maximum number of properties we expect to get
         * from userspace.
         */
        if (n_props >= DRM_I915_PERF_PROP_MAX) {
                DRM_DEBUG("More i915 perf properties specified than exist\n");
                return -EINVAL;
        }

        for (i = 0; i < n_props; i++) {
                u64 oa_period, oa_freq_hz;
                u64 id, value;
                int ret;

                ret = get_user(id, uprop);
                if (ret)
                        return ret;

                ret = get_user(value, uprop + 1);
                if (ret)
                        return ret;

                if (id == 0 || id >= DRM_I915_PERF_PROP_MAX) {
                        DRM_DEBUG("Unknown i915 perf property ID\n");
                        return -EINVAL;
                }

                switch ((enum drm_i915_perf_property_id)id) {
                case DRM_I915_PERF_PROP_CTX_HANDLE:
                        props->single_context = 1;
                        props->ctx_handle = value;
                        break;
                case DRM_I915_PERF_PROP_SAMPLE_OA:
                        if (value)
                                props->sample_flags |= SAMPLE_OA_REPORT;
                        break;
                case DRM_I915_PERF_PROP_OA_METRICS_SET:
                        if (value == 0) {
                                DRM_DEBUG("Unknown OA metric set ID\n");
                                return -EINVAL;
                        }
                        props->metrics_set = value;
                        break;
                case DRM_I915_PERF_PROP_OA_FORMAT:
                        if (value == 0 || value >= I915_OA_FORMAT_MAX) {
                                DRM_DEBUG("Out-of-range OA report format %llu\n",
                                          value);
                                return -EINVAL;
                        }
                        if (!perf->oa_formats[value].size) {
                                DRM_DEBUG("Unsupported OA report format %llu\n",
                                          value);
                                return -EINVAL;
                        }
                        props->oa_format = value;
                        break;
                case DRM_I915_PERF_PROP_OA_EXPONENT:
                        if (value > OA_EXPONENT_MAX) {
                                DRM_DEBUG("OA timer exponent too high (> %u)\n",
                                         OA_EXPONENT_MAX);
                                return -EINVAL;
                        }

                        /* Theoretically we can program the OA unit to sample
                         * e.g. every 160ns for HSW, 167ns for BDW/SKL or 104ns
                         * for BXT. We don't allow such high sampling
                         * frequencies by default unless root.
                         */

                        BUILD_BUG_ON(sizeof(oa_period) != 8);
                        oa_period = oa_exponent_to_ns(perf, value);

                        /* This check is primarily to ensure that oa_period <=
                         * UINT32_MAX (before passing to do_div which only
                         * accepts a u32 denominator), but we can also skip
                         * checking anything < 1Hz which implicitly can't be
                         * limited via an integer oa_max_sample_rate.
                         */
                        if (oa_period <= NSEC_PER_SEC) {
                                u64 tmp = NSEC_PER_SEC;
                                do_div(tmp, oa_period);
                                oa_freq_hz = tmp;
                        } else
                                oa_freq_hz = 0;

                        if (oa_freq_hz > i915_oa_max_sample_rate &&
                            !capable(CAP_SYS_ADMIN)) {
                                DRM_DEBUG("OA exponent would exceed the max sampling frequency (sysctl dev.i915.oa_max_sample_rate) %uHz without root privileges\n",
                                          i915_oa_max_sample_rate);
                                return -EACCES;
                        }

                        props->oa_periodic = true;
                        props->oa_period_exponent = value;
                        break;
                case DRM_I915_PERF_PROP_HOLD_PREEMPTION:
                        props->hold_preemption = !!value;
                        break;
                case DRM_I915_PERF_PROP_MAX:
                        MISSING_CASE(id);
                        return -EINVAL;
                }

                uprop += 2;
        }

        return 0;
}

/**
 * i915_perf_open_ioctl - DRM ioctl() for userspace to open a stream FD
 * @dev: drm device
 * @data: ioctl data copied from userspace (unvalidated)
 * @file: drm file
 *
 * Validates the stream open parameters given by userspace including flags
 * and an array of u64 key, value pair properties.
 *
 * Very little is assumed up front about the nature of the stream being
 * opened (for instance we don't assume it's for periodic OA unit metrics). An
 * i915-perf stream is expected to be a suitable interface for other forms of
 * buffered data written by the GPU besides periodic OA metrics.
 *
 * Note we copy the properties from userspace outside of the i915 perf
 * mutex to avoid an awkward lockdep with mmap_sem.
 *
 * Most of the implementation details are handled by
 * i915_perf_open_ioctl_locked() after taking the &perf->lock
 * mutex for serializing with any non-file-operation driver hooks.
 *
 * Return: A newly opened i915 Perf stream file descriptor or negative
 * error code on failure.
 */
int i915_perf_open_ioctl(struct drm_device *dev, void *data,
                         struct drm_file *file)
{
        struct i915_perf *perf = &to_i915(dev)->perf;
        struct drm_i915_perf_open_param *param = data;
        struct perf_open_properties props;
        u32 known_open_flags;
        int ret;

        if (!perf->i915) {
                DRM_DEBUG("i915 perf interface not available for this system\n");
                return -ENOTSUPP;
        }

        known_open_flags = I915_PERF_FLAG_FD_CLOEXEC |
                           I915_PERF_FLAG_FD_NONBLOCK |
                           I915_PERF_FLAG_DISABLED;
        if (param->flags & ~known_open_flags) {
                DRM_DEBUG("Unknown drm_i915_perf_open_param flag\n");
                return -EINVAL;
        }

        ret = read_properties_unlocked(perf,
                                       u64_to_user_ptr(param->properties_ptr),
                                       param->num_properties,
                                       &props);
        if (ret)
                return ret;

        mutex_lock(&perf->lock);
        ret = i915_perf_open_ioctl_locked(perf, param, &props, file);
        mutex_unlock(&perf->lock);

        return ret;
}

/**
 * i915_perf_register - exposes i915-perf to userspace
 * @i915: i915 device instance
 *
 * In particular OA metric sets are advertised under a sysfs metrics/
 * directory allowing userspace to enumerate valid IDs that can be
 * used to open an i915-perf stream.
 */
void i915_perf_register(struct drm_i915_private *i915)
{
        struct i915_perf *perf = &i915->perf;
        int ret;

        if (!perf->i915)
                return;

        /* To be sure we're synchronized with an attempted
         * i915_perf_open_ioctl(); considering that we register after
         * being exposed to userspace.
         */
        mutex_lock(&perf->lock);

        perf->metrics_kobj =
                kobject_create_and_add("metrics",
                                       &i915->drm.primary->kdev->kobj);
        if (!perf->metrics_kobj)
                goto exit;

        sysfs_attr_init(&perf->test_config.sysfs_metric_id.attr);

        if (IS_TIGERLAKE(i915)) {
                i915_perf_load_test_config_tgl(i915);
        } else if (INTEL_GEN(i915) >= 11) {
                i915_perf_load_test_config_icl(i915);
        } else if (IS_CANNONLAKE(i915)) {
                i915_perf_load_test_config_cnl(i915);
        } else if (IS_COFFEELAKE(i915)) {
                if (IS_CFL_GT2(i915))
                        i915_perf_load_test_config_cflgt2(i915);
                if (IS_CFL_GT3(i915))
                        i915_perf_load_test_config_cflgt3(i915);
        } else if (IS_GEMINILAKE(i915)) {
                i915_perf_load_test_config_glk(i915);
        } else if (IS_KABYLAKE(i915)) {
                if (IS_KBL_GT2(i915))
                        i915_perf_load_test_config_kblgt2(i915);
                else if (IS_KBL_GT3(i915))
                        i915_perf_load_test_config_kblgt3(i915);
        } else if (IS_BROXTON(i915)) {
                i915_perf_load_test_config_bxt(i915);
        } else if (IS_SKYLAKE(i915)) {
                if (IS_SKL_GT2(i915))
                        i915_perf_load_test_config_sklgt2(i915);
                else if (IS_SKL_GT3(i915))
                        i915_perf_load_test_config_sklgt3(i915);
                else if (IS_SKL_GT4(i915))
                        i915_perf_load_test_config_sklgt4(i915);
        } else if (IS_CHERRYVIEW(i915)) {
                i915_perf_load_test_config_chv(i915);
        } else if (IS_BROADWELL(i915)) {
                i915_perf_load_test_config_bdw(i915);
        } else if (IS_HASWELL(i915)) {
                i915_perf_load_test_config_hsw(i915);
        }

        if (perf->test_config.id == 0)
                goto sysfs_error;

        ret = sysfs_create_group(perf->metrics_kobj,
                                 &perf->test_config.sysfs_metric);
        if (ret)
                goto sysfs_error;

        perf->test_config.perf = perf;
        kref_init(&perf->test_config.ref);

        goto exit;

sysfs_error:
        kobject_put(perf->metrics_kobj);
        perf->metrics_kobj = NULL;

exit:
        mutex_unlock(&perf->lock);
}

/**
 * i915_perf_unregister - hide i915-perf from userspace
 * @i915: i915 device instance
 *
 * i915-perf state cleanup is split up into an 'unregister' and
 * 'deinit' phase where the interface is first hidden from
 * userspace by i915_perf_unregister() before cleaning up
 * remaining state in i915_perf_fini().
 */
void i915_perf_unregister(struct drm_i915_private *i915)
{
        struct i915_perf *perf = &i915->perf;

        if (!perf->metrics_kobj)
                return;

        sysfs_remove_group(perf->metrics_kobj,
                           &perf->test_config.sysfs_metric);

        kobject_put(perf->metrics_kobj);
        perf->metrics_kobj = NULL;
}

static bool gen8_is_valid_flex_addr(struct i915_perf *perf, u32 addr)
{
        static const i915_reg_t flex_eu_regs[] = {
                EU_PERF_CNTL0,
                EU_PERF_CNTL1,
                EU_PERF_CNTL2,
                EU_PERF_CNTL3,
                EU_PERF_CNTL4,
                EU_PERF_CNTL5,
                EU_PERF_CNTL6,
        };
        int i;

        for (i = 0; i < ARRAY_SIZE(flex_eu_regs); i++) {
                if (i915_mmio_reg_offset(flex_eu_regs[i]) == addr)
                        return true;
        }
        return false;
}

#define ADDR_IN_RANGE(addr, start, end) \
        ((addr) >= (start) && \
         (addr) <= (end))

#define REG_IN_RANGE(addr, start, end) \
        ((addr) >= i915_mmio_reg_offset(start) && \
         (addr) <= i915_mmio_reg_offset(end))

#define REG_EQUAL(addr, mmio) \
        ((addr) == i915_mmio_reg_offset(mmio))

static bool gen7_is_valid_b_counter_addr(struct i915_perf *perf, u32 addr)
{
        return REG_IN_RANGE(addr, OASTARTTRIG1, OASTARTTRIG8) ||
               REG_IN_RANGE(addr, OAREPORTTRIG1, OAREPORTTRIG8) ||
               REG_IN_RANGE(addr, OACEC0_0, OACEC7_1);
}

static bool gen7_is_valid_mux_addr(struct i915_perf *perf, u32 addr)
{
        return REG_EQUAL(addr, HALF_SLICE_CHICKEN2) ||
               REG_IN_RANGE(addr, MICRO_BP0_0, NOA_WRITE) ||
               REG_IN_RANGE(addr, OA_PERFCNT1_LO, OA_PERFCNT2_HI) ||
               REG_IN_RANGE(addr, OA_PERFMATRIX_LO, OA_PERFMATRIX_HI);
}

static bool gen8_is_valid_mux_addr(struct i915_perf *perf, u32 addr)
{
        return gen7_is_valid_mux_addr(perf, addr) ||
               REG_EQUAL(addr, WAIT_FOR_RC6_EXIT) ||
               REG_IN_RANGE(addr, RPM_CONFIG0, NOA_CONFIG(8));
}

static bool gen10_is_valid_mux_addr(struct i915_perf *perf, u32 addr)
{
        return gen8_is_valid_mux_addr(perf, addr) ||
               REG_EQUAL(addr, GEN10_NOA_WRITE_HIGH) ||
               REG_IN_RANGE(addr, OA_PERFCNT3_LO, OA_PERFCNT4_HI);
}

static bool hsw_is_valid_mux_addr(struct i915_perf *perf, u32 addr)
{
        return gen7_is_valid_mux_addr(perf, addr) ||
               ADDR_IN_RANGE(addr, 0x25100, 0x2FF90) ||
               REG_IN_RANGE(addr, HSW_MBVID2_NOA0, HSW_MBVID2_NOA9) ||
               REG_EQUAL(addr, HSW_MBVID2_MISR0);
}

static bool chv_is_valid_mux_addr(struct i915_perf *perf, u32 addr)
{
        return gen7_is_valid_mux_addr(perf, addr) ||
               ADDR_IN_RANGE(addr, 0x182300, 0x1823A4);
}

static bool gen12_is_valid_b_counter_addr(struct i915_perf *perf, u32 addr)
{
        return REG_IN_RANGE(addr, GEN12_OAG_OASTARTTRIG1, GEN12_OAG_OASTARTTRIG8) ||
               REG_IN_RANGE(addr, GEN12_OAG_OAREPORTTRIG1, GEN12_OAG_OAREPORTTRIG8) ||
               REG_IN_RANGE(addr, GEN12_OAG_CEC0_0, GEN12_OAG_CEC7_1) ||
               REG_IN_RANGE(addr, GEN12_OAG_SCEC0_0, GEN12_OAG_SCEC7_1) ||
               REG_EQUAL(addr, GEN12_OAA_DBG_REG) ||
               REG_EQUAL(addr, GEN12_OAG_OA_PESS) ||
               REG_EQUAL(addr, GEN12_OAG_SPCTR_CNF);
}

static bool gen12_is_valid_mux_addr(struct i915_perf *perf, u32 addr)
{
        return REG_EQUAL(addr, NOA_WRITE) ||
               REG_EQUAL(addr, GEN10_NOA_WRITE_HIGH) ||
               REG_EQUAL(addr, GDT_CHICKEN_BITS) ||
               REG_EQUAL(addr, WAIT_FOR_RC6_EXIT) ||
               REG_EQUAL(addr, RPM_CONFIG0) ||
               REG_EQUAL(addr, RPM_CONFIG1) ||
               REG_IN_RANGE(addr, NOA_CONFIG(0), NOA_CONFIG(8));
}

static u32 mask_reg_value(u32 reg, u32 val)
{
        /* HALF_SLICE_CHICKEN2 is programmed with a the
         * WaDisableSTUnitPowerOptimization workaround. Make sure the value
         * programmed by userspace doesn't change this.
         */
        if (REG_EQUAL(reg, HALF_SLICE_CHICKEN2))
                val = val & ~_MASKED_BIT_ENABLE(GEN8_ST_PO_DISABLE);

        /* WAIT_FOR_RC6_EXIT has only one bit fullfilling the function
         * indicated by its name and a bunch of selection fields used by OA
         * configs.
         */
        if (REG_EQUAL(reg, WAIT_FOR_RC6_EXIT))
                val = val & ~_MASKED_BIT_ENABLE(HSW_WAIT_FOR_RC6_EXIT_ENABLE);

        return val;
}

static struct i915_oa_reg *alloc_oa_regs(struct i915_perf *perf,
                                         bool (*is_valid)(struct i915_perf *perf, u32 addr),
                                         u32 __user *regs,
                                         u32 n_regs)
{
        struct i915_oa_reg *oa_regs;
        int err;
        u32 i;

        if (!n_regs)
                return NULL;

        if (!access_ok(regs, n_regs * sizeof(u32) * 2))
                return ERR_PTR(-EFAULT);

        /* No is_valid function means we're not allowing any register to be programmed. */
        GEM_BUG_ON(!is_valid);
        if (!is_valid)
                return ERR_PTR(-EINVAL);

        oa_regs = kmalloc_array(n_regs, sizeof(*oa_regs), GFP_KERNEL);
        if (!oa_regs)
                return ERR_PTR(-ENOMEM);

        for (i = 0; i < n_regs; i++) {
                u32 addr, value;

                err = get_user(addr, regs);
                if (err)
                        goto addr_err;

                if (!is_valid(perf, addr)) {
                        DRM_DEBUG("Invalid oa_reg address: %X\n", addr);
                        err = -EINVAL;
                        goto addr_err;
                }

                err = get_user(value, regs + 1);
                if (err)
                        goto addr_err;

                oa_regs[i].addr = _MMIO(addr);
                oa_regs[i].value = mask_reg_value(addr, value);

                regs += 2;
        }

        return oa_regs;

addr_err:
        kfree(oa_regs);
        return ERR_PTR(err);
}

static ssize_t show_dynamic_id(struct device *dev,
                               struct device_attribute *attr,
                               char *buf)
{
        struct i915_oa_config *oa_config =
                container_of(attr, typeof(*oa_config), sysfs_metric_id);

        return sprintf(buf, "%d\n", oa_config->id);
}

static int create_dynamic_oa_sysfs_entry(struct i915_perf *perf,
                                         struct i915_oa_config *oa_config)
{
        sysfs_attr_init(&oa_config->sysfs_metric_id.attr);
        oa_config->sysfs_metric_id.attr.name = "id";
        oa_config->sysfs_metric_id.attr.mode = S_IRUGO;
        oa_config->sysfs_metric_id.show = show_dynamic_id;
        oa_config->sysfs_metric_id.store = NULL;

        oa_config->attrs[0] = &oa_config->sysfs_metric_id.attr;
        oa_config->attrs[1] = NULL;

        oa_config->sysfs_metric.name = oa_config->uuid;
        oa_config->sysfs_metric.attrs = oa_config->attrs;

        return sysfs_create_group(perf->metrics_kobj,
                                  &oa_config->sysfs_metric);
}

/**
 * i915_perf_add_config_ioctl - DRM ioctl() for userspace to add a new OA config
 * @dev: drm device
 * @data: ioctl data (pointer to struct drm_i915_perf_oa_config) copied from
 *        userspace (unvalidated)
 * @file: drm file
 *
 * Validates the submitted OA register to be saved into a new OA config that
 * can then be used for programming the OA unit and its NOA network.
 *
 * Returns: A new allocated config number to be used with the perf open ioctl
 * or a negative error code on failure.
 */
int i915_perf_add_config_ioctl(struct drm_device *dev, void *data,
                               struct drm_file *file)
{
        struct i915_perf *perf = &to_i915(dev)->perf;
        struct drm_i915_perf_oa_config *args = data;
        struct i915_oa_config *oa_config, *tmp;
        struct i915_oa_reg *regs;
        int err, id;

        if (!perf->i915) {
                DRM_DEBUG("i915 perf interface not available for this system\n");
                return -ENOTSUPP;
        }

        if (!perf->metrics_kobj) {
                DRM_DEBUG("OA metrics weren't advertised via sysfs\n");
                return -EINVAL;
        }

        if (i915_perf_stream_paranoid && !capable(CAP_SYS_ADMIN)) {
                DRM_DEBUG("Insufficient privileges to add i915 OA config\n");
                return -EACCES;
        }

        if ((!args->mux_regs_ptr || !args->n_mux_regs) &&
            (!args->boolean_regs_ptr || !args->n_boolean_regs) &&
            (!args->flex_regs_ptr || !args->n_flex_regs)) {
                DRM_DEBUG("No OA registers given\n");
                return -EINVAL;
        }

        oa_config = kzalloc(sizeof(*oa_config), GFP_KERNEL);
        if (!oa_config) {
                DRM_DEBUG("Failed to allocate memory for the OA config\n");
                return -ENOMEM;
        }

        oa_config->perf = perf;
        kref_init(&oa_config->ref);

        if (!uuid_is_valid(args->uuid)) {
                DRM_DEBUG("Invalid uuid format for OA config\n");
                err = -EINVAL;
                goto reg_err;
        }

        /* Last character in oa_config->uuid will be 0 because oa_config is
         * kzalloc.
         */
        memcpy(oa_config->uuid, args->uuid, sizeof(args->uuid));

        oa_config->mux_regs_len = args->n_mux_regs;
        regs = alloc_oa_regs(perf,
                             perf->ops.is_valid_mux_reg,
                             u64_to_user_ptr(args->mux_regs_ptr),
                             args->n_mux_regs);

        if (IS_ERR(regs)) {
                DRM_DEBUG("Failed to create OA config for mux_regs\n");
                err = PTR_ERR(regs);
                goto reg_err;
        }
        oa_config->mux_regs = regs;

        oa_config->b_counter_regs_len = args->n_boolean_regs;
        regs = alloc_oa_regs(perf,
                             perf->ops.is_valid_b_counter_reg,
                             u64_to_user_ptr(args->boolean_regs_ptr),
                             args->n_boolean_regs);

        if (IS_ERR(regs)) {
                DRM_DEBUG("Failed to create OA config for b_counter_regs\n");
                err = PTR_ERR(regs);
                goto reg_err;
        }
        oa_config->b_counter_regs = regs;

        if (INTEL_GEN(perf->i915) < 8) {
                if (args->n_flex_regs != 0) {
                        err = -EINVAL;
                        goto reg_err;
                }
        } else {
                oa_config->flex_regs_len = args->n_flex_regs;
                regs = alloc_oa_regs(perf,
                                     perf->ops.is_valid_flex_reg,
                                     u64_to_user_ptr(args->flex_regs_ptr),
                                     args->n_flex_regs);

                if (IS_ERR(regs)) {
                        DRM_DEBUG("Failed to create OA config for flex_regs\n");
                        err = PTR_ERR(regs);
                        goto reg_err;
                }
                oa_config->flex_regs = regs;
        }

        err = mutex_lock_interruptible(&perf->metrics_lock);
        if (err)
                goto reg_err;

        /* We shouldn't have too many configs, so this iteration shouldn't be
         * too costly.
         */
        idr_for_each_entry(&perf->metrics_idr, tmp, id) {
                if (!strcmp(tmp->uuid, oa_config->uuid)) {
                        DRM_DEBUG("OA config already exists with this uuid\n");
                        err = -EADDRINUSE;
                        goto sysfs_err;
                }
        }

        err = create_dynamic_oa_sysfs_entry(perf, oa_config);
        if (err) {
                DRM_DEBUG("Failed to create sysfs entry for OA config\n");
                goto sysfs_err;
        }

        /* Config id 0 is invalid, id 1 for kernel stored test config. */
        oa_config->id = idr_alloc(&perf->metrics_idr,
                                  oa_config, 2,
                                  0, GFP_KERNEL);
        if (oa_config->id < 0) {
                DRM_DEBUG("Failed to create sysfs entry for OA config\n");
                err = oa_config->id;
                goto sysfs_err;
        }

        mutex_unlock(&perf->metrics_lock);

        DRM_DEBUG("Added config %s id=%i\n", oa_config->uuid, oa_config->id);

        return oa_config->id;

sysfs_err:
        mutex_unlock(&perf->metrics_lock);
reg_err:
        i915_oa_config_put(oa_config);
        DRM_DEBUG("Failed to add new OA config\n");
        return err;
}

/**
 * i915_perf_remove_config_ioctl - DRM ioctl() for userspace to remove an OA config
 * @dev: drm device
 * @data: ioctl data (pointer to u64 integer) copied from userspace
 * @file: drm file
 *
 * Configs can be removed while being used, the will stop appearing in sysfs
 * and their content will be freed when the stream using the config is closed.
 *
 * Returns: 0 on success or a negative error code on failure.
 */
int i915_perf_remove_config_ioctl(struct drm_device *dev, void *data,
                                  struct drm_file *file)
{
        struct i915_perf *perf = &to_i915(dev)->perf;
        u64 *arg = data;
        struct i915_oa_config *oa_config;
        int ret;

        if (!perf->i915) {
                DRM_DEBUG("i915 perf interface not available for this system\n");
                return -ENOTSUPP;
        }

        if (i915_perf_stream_paranoid && !capable(CAP_SYS_ADMIN)) {
                DRM_DEBUG("Insufficient privileges to remove i915 OA config\n");
                return -EACCES;
        }

        ret = mutex_lock_interruptible(&perf->metrics_lock);
        if (ret)
                return ret;

        oa_config = idr_find(&perf->metrics_idr, *arg);
        if (!oa_config) {
                DRM_DEBUG("Failed to remove unknown OA config\n");
                ret = -ENOENT;
                goto err_unlock;
        }

        GEM_BUG_ON(*arg != oa_config->id);

        sysfs_remove_group(perf->metrics_kobj, &oa_config->sysfs_metric);

        idr_remove(&perf->metrics_idr, *arg);

        mutex_unlock(&perf->metrics_lock);

        DRM_DEBUG("Removed config %s id=%i\n", oa_config->uuid, oa_config->id);

        i915_oa_config_put(oa_config);

        return 0;

err_unlock:
        mutex_unlock(&perf->metrics_lock);
        return ret;
}

static struct ctl_table oa_table[] = {
        {
         .procname = "perf_stream_paranoid",
         .data = &i915_perf_stream_paranoid,
         .maxlen = sizeof(i915_perf_stream_paranoid),
         .mode = 0644,
         .proc_handler = proc_dointvec_minmax,
         .extra1 = SYSCTL_ZERO,
         .extra2 = SYSCTL_ONE,
         },
        {
         .procname = "oa_max_sample_rate",
         .data = &i915_oa_max_sample_rate,
         .maxlen = sizeof(i915_oa_max_sample_rate),
         .mode = 0644,
         .proc_handler = proc_dointvec_minmax,
         .extra1 = SYSCTL_ZERO,
         .extra2 = &oa_sample_rate_hard_limit,
         },
        {}
};

static struct ctl_table i915_root[] = {
        {
         .procname = "i915",
         .maxlen = 0,
         .mode = 0555,
         .child = oa_table,
         },
        {}
};

static struct ctl_table dev_root[] = {
        {
         .procname = "dev",
         .maxlen = 0,
         .mode = 0555,
         .child = i915_root,
         },
        {}
};

/**
 * i915_perf_init - initialize i915-perf state on module bind
 * @i915: i915 device instance
 *
 * Initializes i915-perf state without exposing anything to userspace.
 *
 * Note: i915-perf initialization is split into an 'init' and 'register'
 * phase with the i915_perf_register() exposing state to userspace.
 */
void i915_perf_init(struct drm_i915_private *i915)
{
        struct i915_perf *perf = &i915->perf;

        /* XXX const struct i915_perf_ops! */

        if (IS_HASWELL(i915)) {
                perf->ops.is_valid_b_counter_reg = gen7_is_valid_b_counter_addr;
                perf->ops.is_valid_mux_reg = hsw_is_valid_mux_addr;
                perf->ops.is_valid_flex_reg = NULL;
                perf->ops.enable_metric_set = hsw_enable_metric_set;
                perf->ops.disable_metric_set = hsw_disable_metric_set;
                perf->ops.oa_enable = gen7_oa_enable;
                perf->ops.oa_disable = gen7_oa_disable;
                perf->ops.read = gen7_oa_read;
                perf->ops.oa_hw_tail_read = gen7_oa_hw_tail_read;

                perf->oa_formats = hsw_oa_formats;
        } else if (HAS_LOGICAL_RING_CONTEXTS(i915)) {
                /* Note: that although we could theoretically also support the
                 * legacy ringbuffer mode on BDW (and earlier iterations of
                 * this driver, before upstreaming did this) it didn't seem
                 * worth the complexity to maintain now that BDW+ enable
                 * execlist mode by default.
                 */
                perf->ops.read = gen8_oa_read;

                if (IS_GEN_RANGE(i915, 8, 9)) {
                        perf->oa_formats = gen8_plus_oa_formats;

                        perf->ops.is_valid_b_counter_reg =
                                gen7_is_valid_b_counter_addr;
                        perf->ops.is_valid_mux_reg =
                                gen8_is_valid_mux_addr;
                        perf->ops.is_valid_flex_reg =
                                gen8_is_valid_flex_addr;

                        if (IS_CHERRYVIEW(i915)) {
                                perf->ops.is_valid_mux_reg =
                                        chv_is_valid_mux_addr;
                        }

                        perf->ops.oa_enable = gen8_oa_enable;
                        perf->ops.oa_disable = gen8_oa_disable;
                        perf->ops.enable_metric_set = gen8_enable_metric_set;
                        perf->ops.disable_metric_set = gen8_disable_metric_set;
                        perf->ops.oa_hw_tail_read = gen8_oa_hw_tail_read;

                        if (IS_GEN(i915, 8)) {
                                perf->ctx_oactxctrl_offset = 0x120;
                                perf->ctx_flexeu0_offset = 0x2ce;

                                perf->gen8_valid_ctx_bit = BIT(25);
                        } else {
                                perf->ctx_oactxctrl_offset = 0x128;
                                perf->ctx_flexeu0_offset = 0x3de;

                                perf->gen8_valid_ctx_bit = BIT(16);
                        }
                } else if (IS_GEN_RANGE(i915, 10, 11)) {
                        perf->oa_formats = gen8_plus_oa_formats;

                        perf->ops.is_valid_b_counter_reg =
                                gen7_is_valid_b_counter_addr;
                        perf->ops.is_valid_mux_reg =
                                gen10_is_valid_mux_addr;
                        perf->ops.is_valid_flex_reg =
                                gen8_is_valid_flex_addr;

                        perf->ops.oa_enable = gen8_oa_enable;
                        perf->ops.oa_disable = gen8_oa_disable;
                        perf->ops.enable_metric_set = gen8_enable_metric_set;
                        perf->ops.disable_metric_set = gen10_disable_metric_set;
                        perf->ops.oa_hw_tail_read = gen8_oa_hw_tail_read;

                        if (IS_GEN(i915, 10)) {
                                perf->ctx_oactxctrl_offset = 0x128;
                                perf->ctx_flexeu0_offset = 0x3de;
                        } else {
                                perf->ctx_oactxctrl_offset = 0x124;
                                perf->ctx_flexeu0_offset = 0x78e;
                        }
                        perf->gen8_valid_ctx_bit = BIT(16);
                } else if (IS_GEN(i915, 12)) {
                        perf->oa_formats = gen12_oa_formats;

                        perf->ops.is_valid_b_counter_reg =
                                gen12_is_valid_b_counter_addr;
                        perf->ops.is_valid_mux_reg =
                                gen12_is_valid_mux_addr;
                        perf->ops.is_valid_flex_reg =
                                gen8_is_valid_flex_addr;

                        perf->ops.oa_enable = gen12_oa_enable;
                        perf->ops.oa_disable = gen12_oa_disable;
                        perf->ops.enable_metric_set = gen12_enable_metric_set;
                        perf->ops.disable_metric_set = gen12_disable_metric_set;
                        perf->ops.oa_hw_tail_read = gen12_oa_hw_tail_read;

                        perf->ctx_flexeu0_offset = 0;
                        perf->ctx_oactxctrl_offset = 0x144;
                }
        }

        if (perf->ops.enable_metric_set) {
                mutex_init(&perf->lock);

                oa_sample_rate_hard_limit = 1000 *
                        (RUNTIME_INFO(i915)->cs_timestamp_frequency_khz / 2);

                mutex_init(&perf->metrics_lock);
                idr_init(&perf->metrics_idr);

                /* We set up some ratelimit state to potentially throttle any
                 * _NOTES about spurious, invalid OA reports which we don't
                 * forward to userspace.
                 *
                 * We print a _NOTE about any throttling when closing the
                 * stream instead of waiting until driver _fini which no one
                 * would ever see.
                 *
                 * Using the same limiting factors as printk_ratelimit()
                 */
                ratelimit_state_init(&perf->spurious_report_rs, 5 * HZ, 10);
                /* Since we use a DRM_NOTE for spurious reports it would be
                 * inconsistent to let __ratelimit() automatically print a
                 * warning for throttling.
                 */
                ratelimit_set_flags(&perf->spurious_report_rs,
                                    RATELIMIT_MSG_ON_RELEASE);

                atomic64_set(&perf->noa_programming_delay,
                             500 * 1000 /* 500us */);

                perf->i915 = i915;
        }
}

static int destroy_config(int id, void *p, void *data)
{
        i915_oa_config_put(p);
        return 0;
}

void i915_perf_sysctl_register(void)
{
        sysctl_header = register_sysctl_table(dev_root);
}

void i915_perf_sysctl_unregister(void)
{
        unregister_sysctl_table(sysctl_header);
}

/**
 * i915_perf_fini - Counter part to i915_perf_init()
 * @i915: i915 device instance
 */
void i915_perf_fini(struct drm_i915_private *i915)
{
        struct i915_perf *perf = &i915->perf;

        if (!perf->i915)
                return;

        idr_for_each(&perf->metrics_idr, destroy_config, perf);
        idr_destroy(&perf->metrics_idr);

        memset(&perf->ops, 0, sizeof(perf->ops));
        perf->i915 = NULL;
}

/**
 * i915_perf_ioctl_version - Version of the i915-perf subsystem
 *
 * This version number is used by userspace to detect available features.
 */
int i915_perf_ioctl_version(void)
{
        /*
         * 1: Initial version
         *   I915_PERF_IOCTL_ENABLE
         *   I915_PERF_IOCTL_DISABLE
         *
         * 2: Added runtime modification of OA config.
         *   I915_PERF_IOCTL_CONFIG
         *
         * 3: Add DRM_I915_PERF_PROP_HOLD_PREEMPTION parameter to hold
         *    preemption on a particular context so that performance data is
         *    accessible from a delta of MI_RPC reports without looking at the
         *    OA buffer.
         */
        return 3;
}

#if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
#include "selftests/i915_perf.c"
#endif