drivers/gpu/drm/gma500/psb_intel_lvds.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright © 2006-2007 Intel Corporation
   4  *
   5  * Authors:
   6  *      Eric Anholt <eric@anholt.net>
   7  *      Dave Airlie <airlied@linux.ie>
   8  *      Jesse Barnes <jesse.barnes@intel.com>
   9  */
  10
  11 #include <linux/i2c.h>
  12 #include <linux/pm_runtime.h>
  13
  14 #include <drm/drm_simple_kms_helper.h>
  15
  16 #include "intel_bios.h"
  17 #include "power.h"
  18 #include "psb_drv.h"
  19 #include "psb_intel_drv.h"
  20 #include "psb_intel_reg.h"
  21
  22 /*
  23  * LVDS I2C backlight control macros
  24  */
  25 #define BRIGHTNESS_MAX_LEVEL 100
  26 #define BRIGHTNESS_MASK 0xFF
  27 #define BLC_I2C_TYPE    0x01
  28 #define BLC_PWM_TYPT    0x02
  29
  30 #define BLC_POLARITY_NORMAL 0
  31 #define BLC_POLARITY_INVERSE 1
  32
  33 #define PSB_BLC_MAX_PWM_REG_FREQ       (0xFFFE)
  34 #define PSB_BLC_MIN_PWM_REG_FREQ        (0x2)
  35 #define PSB_BLC_PWM_PRECISION_FACTOR    (10)
  36 #define PSB_BACKLIGHT_PWM_CTL_SHIFT     (16)
  37 #define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
  38
  39 struct psb_intel_lvds_priv {
  40         /*
  41          * Saved LVDO output states
  42          */
  43         uint32_t savePP_ON;
  44         uint32_t savePP_OFF;
  45         uint32_t saveLVDS;
  46         uint32_t savePP_CONTROL;
  47         uint32_t savePP_CYCLE;
  48         uint32_t savePFIT_CONTROL;
  49         uint32_t savePFIT_PGM_RATIOS;
  50         uint32_t saveBLC_PWM_CTL;
  51
  52         struct psb_intel_i2c_chan *i2c_bus;
  53         struct psb_intel_i2c_chan *ddc_bus;
  54 };
  55
  56
  57 /*
  58  * Returns the maximum level of the backlight duty cycle field.
  59  */
  60 static u32 psb_intel_lvds_get_max_backlight(struct drm_device *dev)
  61 {
  62         struct drm_psb_private *dev_priv = dev->dev_private;
  63         u32 ret;
  64
  65         if (gma_power_begin(dev, false)) {
  66                 ret = REG_READ(BLC_PWM_CTL);
  67                 gma_power_end(dev);
  68         } else /* Powered off, use the saved value */
  69                 ret = dev_priv->regs.saveBLC_PWM_CTL;
  70
  71         /* Top 15bits hold the frequency mask */
  72         ret = (ret &  BACKLIGHT_MODULATION_FREQ_MASK) >>
  73                                         BACKLIGHT_MODULATION_FREQ_SHIFT;
  74
  75         ret *= 2;       /* Return a 16bit range as needed for setting */
  76         if (ret == 0)
  77                 dev_err(dev->dev, "BL bug: Reg %08x save %08X\n",
  78                         REG_READ(BLC_PWM_CTL), dev_priv->regs.saveBLC_PWM_CTL);
  79         return ret;
  80 }
  81
  82 /*
  83  * Set LVDS backlight level by I2C command
  84  *
  85  * FIXME: at some point we need to both track this for PM and also
  86  * disable runtime pm on MRST if the brightness is nil (ie blanked)
  87  */
  88 static int psb_lvds_i2c_set_brightness(struct drm_device *dev,
  89                                         unsigned int level)
  90 {
  91         struct drm_psb_private *dev_priv =
  92                 (struct drm_psb_private *)dev->dev_private;
  93
  94         struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
  95         u8 out_buf[2];
  96         unsigned int blc_i2c_brightness;
  97
  98         struct i2c_msg msgs[] = {
  99                 {
 100                         .addr = lvds_i2c_bus->slave_addr,
 101                         .flags = 0,
 102                         .len = 2,
 103                         .buf = out_buf,
 104                 }
 105         };
 106
 107         blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
 108                              BRIGHTNESS_MASK /
 109                              BRIGHTNESS_MAX_LEVEL);
 110
 111         if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
 112                 blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
 113
 114         out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
 115         out_buf[1] = (u8)blc_i2c_brightness;
 116
 117         if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1) {
 118                 dev_dbg(dev->dev, "I2C set brightness.(command, value) (%d, %d)\n",
 119                         dev_priv->lvds_bl->brightnesscmd,
 120                         blc_i2c_brightness);
 121                 return 0;
 122         }
 123
 124         dev_err(dev->dev, "I2C transfer error\n");
 125         return -1;
 126 }
 127
 128
 129 static int psb_lvds_pwm_set_brightness(struct drm_device *dev, int level)
 130 {
 131         struct drm_psb_private *dev_priv =
 132                         (struct drm_psb_private *)dev->dev_private;
 133
 134         u32 max_pwm_blc;
 135         u32 blc_pwm_duty_cycle;
 136
 137         max_pwm_blc = psb_intel_lvds_get_max_backlight(dev);
 138
 139         /*BLC_PWM_CTL Should be initiated while backlight device init*/
 140         BUG_ON(max_pwm_blc == 0);
 141
 142         blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
 143
 144         if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
 145                 blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
 146
 147         blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
 148         REG_WRITE(BLC_PWM_CTL,
 149                   (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
 150                   (blc_pwm_duty_cycle));
 151
 152         dev_info(dev->dev, "Backlight lvds set brightness %08x\n",
 153                   (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
 154                   (blc_pwm_duty_cycle));
 155
 156         return 0;
 157 }
 158
 159 /*
 160  * Set LVDS backlight level either by I2C or PWM
 161  */
 162 void psb_intel_lvds_set_brightness(struct drm_device *dev, int level)
 163 {
 164         struct drm_psb_private *dev_priv = dev->dev_private;
 165
 166         dev_dbg(dev->dev, "backlight level is %d\n", level);
 167
 168         if (!dev_priv->lvds_bl) {
 169                 dev_err(dev->dev, "NO LVDS backlight info\n");
 170                 return;
 171         }
 172
 173         if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
 174                 psb_lvds_i2c_set_brightness(dev, level);
 175         else
 176                 psb_lvds_pwm_set_brightness(dev, level);
 177 }
 178
 179 /*
 180  * Sets the backlight level.
 181  *
 182  * level: backlight level, from 0 to psb_intel_lvds_get_max_backlight().
 183  */
 184 static void psb_intel_lvds_set_backlight(struct drm_device *dev, int level)
 185 {
 186         struct drm_psb_private *dev_priv = dev->dev_private;
 187         u32 blc_pwm_ctl;
 188
 189         if (gma_power_begin(dev, false)) {
 190                 blc_pwm_ctl = REG_READ(BLC_PWM_CTL);
 191                 blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
 192                 REG_WRITE(BLC_PWM_CTL,
 193                                 (blc_pwm_ctl |
 194                                 (level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
 195                 dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl |
 196                                         (level << BACKLIGHT_DUTY_CYCLE_SHIFT));
 197                 gma_power_end(dev);
 198         } else {
 199                 blc_pwm_ctl = dev_priv->regs.saveBLC_PWM_CTL &
 200                                 ~BACKLIGHT_DUTY_CYCLE_MASK;
 201                 dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl |
 202                                         (level << BACKLIGHT_DUTY_CYCLE_SHIFT));
 203         }
 204 }
 205
 206 /*
 207  * Sets the power state for the panel.
 208  */
 209 static void psb_intel_lvds_set_power(struct drm_device *dev, bool on)
 210 {
 211         struct drm_psb_private *dev_priv = dev->dev_private;
 212         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 213         u32 pp_status;
 214
 215         if (!gma_power_begin(dev, true)) {
 216                 dev_err(dev->dev, "set power, chip off!\n");
 217                 return;
 218         }
 219
 220         if (on) {
 221                 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
 222                           POWER_TARGET_ON);
 223                 do {
 224                         pp_status = REG_READ(PP_STATUS);
 225                 } while ((pp_status & PP_ON) == 0);
 226
 227                 psb_intel_lvds_set_backlight(dev,
 228                                              mode_dev->backlight_duty_cycle);
 229         } else {
 230                 psb_intel_lvds_set_backlight(dev, 0);
 231
 232                 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
 233                           ~POWER_TARGET_ON);
 234                 do {
 235                         pp_status = REG_READ(PP_STATUS);
 236                 } while (pp_status & PP_ON);
 237         }
 238
 239         gma_power_end(dev);
 240 }
 241
 242 static void psb_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
 243 {
 244         struct drm_device *dev = encoder->dev;
 245
 246         if (mode == DRM_MODE_DPMS_ON)
 247                 psb_intel_lvds_set_power(dev, true);
 248         else
 249                 psb_intel_lvds_set_power(dev, false);
 250
 251         /* XXX: We never power down the LVDS pairs. */
 252 }
 253
 254 static void psb_intel_lvds_save(struct drm_connector *connector)
 255 {
 256         struct drm_device *dev = connector->dev;
 257         struct drm_psb_private *dev_priv =
 258                 (struct drm_psb_private *)dev->dev_private;
 259         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 260         struct psb_intel_lvds_priv *lvds_priv =
 261                 (struct psb_intel_lvds_priv *)gma_encoder->dev_priv;
 262
 263         lvds_priv->savePP_ON = REG_READ(LVDSPP_ON);
 264         lvds_priv->savePP_OFF = REG_READ(LVDSPP_OFF);
 265         lvds_priv->saveLVDS = REG_READ(LVDS);
 266         lvds_priv->savePP_CONTROL = REG_READ(PP_CONTROL);
 267         lvds_priv->savePP_CYCLE = REG_READ(PP_CYCLE);
 268         /*lvds_priv->savePP_DIVISOR = REG_READ(PP_DIVISOR);*/
 269         lvds_priv->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
 270         lvds_priv->savePFIT_CONTROL = REG_READ(PFIT_CONTROL);
 271         lvds_priv->savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS);
 272
 273         /*TODO: move backlight_duty_cycle to psb_intel_lvds_priv*/
 274         dev_priv->backlight_duty_cycle = (dev_priv->regs.saveBLC_PWM_CTL &
 275                                                 BACKLIGHT_DUTY_CYCLE_MASK);
 276
 277         /*
 278          * If the light is off at server startup,
 279          * just make it full brightness
 280          */
 281         if (dev_priv->backlight_duty_cycle == 0)
 282                 dev_priv->backlight_duty_cycle =
 283                 psb_intel_lvds_get_max_backlight(dev);
 284
 285         dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
 286                         lvds_priv->savePP_ON,
 287                         lvds_priv->savePP_OFF,
 288                         lvds_priv->saveLVDS,
 289                         lvds_priv->savePP_CONTROL,
 290                         lvds_priv->savePP_CYCLE,
 291                         lvds_priv->saveBLC_PWM_CTL);
 292 }
 293
 294 static void psb_intel_lvds_restore(struct drm_connector *connector)
 295 {
 296         struct drm_device *dev = connector->dev;
 297         u32 pp_status;
 298         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 299         struct psb_intel_lvds_priv *lvds_priv =
 300                 (struct psb_intel_lvds_priv *)gma_encoder->dev_priv;
 301
 302         dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
 303                         lvds_priv->savePP_ON,
 304                         lvds_priv->savePP_OFF,
 305                         lvds_priv->saveLVDS,
 306                         lvds_priv->savePP_CONTROL,
 307                         lvds_priv->savePP_CYCLE,
 308                         lvds_priv->saveBLC_PWM_CTL);
 309
 310         REG_WRITE(BLC_PWM_CTL, lvds_priv->saveBLC_PWM_CTL);
 311         REG_WRITE(PFIT_CONTROL, lvds_priv->savePFIT_CONTROL);
 312         REG_WRITE(PFIT_PGM_RATIOS, lvds_priv->savePFIT_PGM_RATIOS);
 313         REG_WRITE(LVDSPP_ON, lvds_priv->savePP_ON);
 314         REG_WRITE(LVDSPP_OFF, lvds_priv->savePP_OFF);
 315         /*REG_WRITE(PP_DIVISOR, lvds_priv->savePP_DIVISOR);*/
 316         REG_WRITE(PP_CYCLE, lvds_priv->savePP_CYCLE);
 317         REG_WRITE(PP_CONTROL, lvds_priv->savePP_CONTROL);
 318         REG_WRITE(LVDS, lvds_priv->saveLVDS);
 319
 320         if (lvds_priv->savePP_CONTROL & POWER_TARGET_ON) {
 321                 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
 322                         POWER_TARGET_ON);
 323                 do {
 324                         pp_status = REG_READ(PP_STATUS);
 325                 } while ((pp_status & PP_ON) == 0);
 326         } else {
 327                 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
 328                         ~POWER_TARGET_ON);
 329                 do {
 330                         pp_status = REG_READ(PP_STATUS);
 331                 } while (pp_status & PP_ON);
 332         }
 333 }
 334
 335 enum drm_mode_status psb_intel_lvds_mode_valid(struct drm_connector *connector,
 336                                  struct drm_display_mode *mode)
 337 {
 338         struct drm_psb_private *dev_priv = connector->dev->dev_private;
 339         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 340         struct drm_display_mode *fixed_mode =
 341                                         dev_priv->mode_dev.panel_fixed_mode;
 342
 343         if (gma_encoder->type == INTEL_OUTPUT_MIPI2)
 344                 fixed_mode = dev_priv->mode_dev.panel_fixed_mode2;
 345
 346         /* just in case */
 347         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 348                 return MODE_NO_DBLESCAN;
 349
 350         /* just in case */
 351         if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 352                 return MODE_NO_INTERLACE;
 353
 354         if (fixed_mode) {
 355                 if (mode->hdisplay > fixed_mode->hdisplay)
 356                         return MODE_PANEL;
 357                 if (mode->vdisplay > fixed_mode->vdisplay)
 358                         return MODE_PANEL;
 359         }
 360         return MODE_OK;
 361 }
 362
 363 bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder,
 364                                   const struct drm_display_mode *mode,
 365                                   struct drm_display_mode *adjusted_mode)
 366 {
 367         struct drm_device *dev = encoder->dev;
 368         struct drm_psb_private *dev_priv = dev->dev_private;
 369         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 370         struct gma_crtc *gma_crtc = to_gma_crtc(encoder->crtc);
 371         struct drm_encoder *tmp_encoder;
 372         struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
 373         struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
 374
 375         if (gma_encoder->type == INTEL_OUTPUT_MIPI2)
 376                 panel_fixed_mode = mode_dev->panel_fixed_mode2;
 377
 378         /* PSB requires the LVDS is on pipe B, MRST has only one pipe anyway */
 379         if (!IS_MRST(dev) && gma_crtc->pipe == 0) {
 380                 pr_err("Can't support LVDS on pipe A\n");
 381                 return false;
 382         }
 383         if (IS_MRST(dev) && gma_crtc->pipe != 0) {
 384                 pr_err("Must use PIPE A\n");
 385                 return false;
 386         }
 387         /* Should never happen!! */
 388         list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
 389                             head) {
 390                 if (tmp_encoder != encoder
 391                     && tmp_encoder->crtc == encoder->crtc) {
 392                         pr_err("Can't enable LVDS and another encoder on the same pipe\n");
 393                         return false;
 394                 }
 395         }
 396
 397         /*
 398          * If we have timings from the BIOS for the panel, put them in
 399          * to the adjusted mode.  The CRTC will be set up for this mode,
 400          * with the panel scaling set up to source from the H/VDisplay
 401          * of the original mode.
 402          */
 403         if (panel_fixed_mode != NULL) {
 404                 adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
 405                 adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
 406                 adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
 407                 adjusted_mode->htotal = panel_fixed_mode->htotal;
 408                 adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
 409                 adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
 410                 adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
 411                 adjusted_mode->vtotal = panel_fixed_mode->vtotal;
 412                 adjusted_mode->clock = panel_fixed_mode->clock;
 413                 drm_mode_set_crtcinfo(adjusted_mode,
 414                                       CRTC_INTERLACE_HALVE_V);
 415         }
 416
 417         /*
 418          * XXX: It would be nice to support lower refresh rates on the
 419          * panels to reduce power consumption, and perhaps match the
 420          * user's requested refresh rate.
 421          */
 422
 423         return true;
 424 }
 425
 426 static void psb_intel_lvds_prepare(struct drm_encoder *encoder)
 427 {
 428         struct drm_device *dev = encoder->dev;
 429         struct drm_psb_private *dev_priv = dev->dev_private;
 430         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 431
 432         if (!gma_power_begin(dev, true))
 433                 return;
 434
 435         mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
 436         mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
 437                                           BACKLIGHT_DUTY_CYCLE_MASK);
 438
 439         psb_intel_lvds_set_power(dev, false);
 440
 441         gma_power_end(dev);
 442 }
 443
 444 static void psb_intel_lvds_commit(struct drm_encoder *encoder)
 445 {
 446         struct drm_device *dev = encoder->dev;
 447         struct drm_psb_private *dev_priv = dev->dev_private;
 448         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 449
 450         if (mode_dev->backlight_duty_cycle == 0)
 451                 mode_dev->backlight_duty_cycle =
 452                     psb_intel_lvds_get_max_backlight(dev);
 453
 454         psb_intel_lvds_set_power(dev, true);
 455 }
 456
 457 static void psb_intel_lvds_mode_set(struct drm_encoder *encoder,
 458                                 struct drm_display_mode *mode,
 459                                 struct drm_display_mode *adjusted_mode)
 460 {
 461         struct drm_device *dev = encoder->dev;
 462         struct drm_psb_private *dev_priv = dev->dev_private;
 463         u32 pfit_control;
 464
 465         /*
 466          * The LVDS pin pair will already have been turned on in the
 467          * psb_intel_crtc_mode_set since it has a large impact on the DPLL
 468          * settings.
 469          */
 470
 471         /*
 472          * Enable automatic panel scaling so that non-native modes fill the
 473          * screen.  Should be enabled before the pipe is enabled, according to
 474          * register description and PRM.
 475          */
 476         if (mode->hdisplay != adjusted_mode->hdisplay ||
 477             mode->vdisplay != adjusted_mode->vdisplay)
 478                 pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
 479                                 HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
 480                                 HORIZ_INTERP_BILINEAR);
 481         else
 482                 pfit_control = 0;
 483
 484         if (dev_priv->lvds_dither)
 485                 pfit_control |= PANEL_8TO6_DITHER_ENABLE;
 486
 487         REG_WRITE(PFIT_CONTROL, pfit_control);
 488 }
 489
 490 /*
 491  * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
 492  */
 493 static int psb_intel_lvds_get_modes(struct drm_connector *connector)
 494 {
 495         struct drm_device *dev = connector->dev;
 496         struct drm_psb_private *dev_priv = dev->dev_private;
 497         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 498         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 499         struct psb_intel_lvds_priv *lvds_priv = gma_encoder->dev_priv;
 500         int ret = 0;
 501
 502         if (!IS_MRST(dev))
 503                 ret = psb_intel_ddc_get_modes(connector, &lvds_priv->i2c_bus->adapter);
 504
 505         if (ret)
 506                 return ret;
 507
 508         if (mode_dev->panel_fixed_mode != NULL) {
 509                 struct drm_display_mode *mode =
 510                     drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
 511                 drm_mode_probed_add(connector, mode);
 512                 return 1;
 513         }
 514
 515         return 0;
 516 }
 517
 518 /**
 519  * psb_intel_lvds_destroy - unregister and free LVDS structures
 520  * @connector: connector to free
 521  *
 522  * Unregister the DDC bus for this connector then free the driver private
 523  * structure.
 524  */
 525 void psb_intel_lvds_destroy(struct drm_connector *connector)
 526 {
 527         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 528         struct psb_intel_lvds_priv *lvds_priv = gma_encoder->dev_priv;
 529
 530         psb_intel_i2c_destroy(lvds_priv->ddc_bus);
 531         drm_connector_unregister(connector);
 532         drm_connector_cleanup(connector);
 533         kfree(connector);
 534 }
 535
 536 int psb_intel_lvds_set_property(struct drm_connector *connector,
 537                                        struct drm_property *property,
 538                                        uint64_t value)
 539 {
 540         struct drm_encoder *encoder = connector->encoder;
 541
 542         if (!encoder)
 543                 return -1;
 544
 545         if (!strcmp(property->name, "scaling mode")) {
 546                 struct gma_crtc *crtc = to_gma_crtc(encoder->crtc);
 547                 uint64_t curval;
 548
 549                 if (!crtc)
 550                         goto set_prop_error;
 551
 552                 switch (value) {
 553                 case DRM_MODE_SCALE_FULLSCREEN:
 554                         break;
 555                 case DRM_MODE_SCALE_NO_SCALE:
 556                         break;
 557                 case DRM_MODE_SCALE_ASPECT:
 558                         break;
 559                 default:
 560                         goto set_prop_error;
 561                 }
 562
 563                 if (drm_object_property_get_value(&connector->base,
 564                                                      property,
 565                                                      &curval))
 566                         goto set_prop_error;
 567
 568                 if (curval == value)
 569                         goto set_prop_done;
 570
 571                 if (drm_object_property_set_value(&connector->base,
 572                                                         property,
 573                                                         value))
 574                         goto set_prop_error;
 575
 576                 if (crtc->saved_mode.hdisplay != 0 &&
 577                     crtc->saved_mode.vdisplay != 0) {
 578                         if (!drm_crtc_helper_set_mode(encoder->crtc,
 579                                                       &crtc->saved_mode,
 580                                                       encoder->crtc->x,
 581                                                       encoder->crtc->y,
 582                                                       encoder->crtc->primary->fb))
 583                                 goto set_prop_error;
 584                 }
 585         } else if (!strcmp(property->name, "backlight")) {
 586                 if (drm_object_property_set_value(&connector->base,
 587                                                         property,
 588                                                         value))
 589                         goto set_prop_error;
 590                 else
 591                         gma_backlight_set(encoder->dev, value);
 592         } else if (!strcmp(property->name, "DPMS")) {
 593                 const struct drm_encoder_helper_funcs *hfuncs
 594                                                 = encoder->helper_private;
 595                 hfuncs->dpms(encoder, value);
 596         }
 597
 598 set_prop_done:
 599         return 0;
 600 set_prop_error:
 601         return -1;
 602 }
 603
 604 static const struct drm_encoder_helper_funcs psb_intel_lvds_helper_funcs = {
 605         .dpms = psb_intel_lvds_encoder_dpms,
 606         .mode_fixup = psb_intel_lvds_mode_fixup,
 607         .prepare = psb_intel_lvds_prepare,
 608         .mode_set = psb_intel_lvds_mode_set,
 609         .commit = psb_intel_lvds_commit,
 610 };
 611
 612 const struct drm_connector_helper_funcs
 613                                 psb_intel_lvds_connector_helper_funcs = {
 614         .get_modes = psb_intel_lvds_get_modes,
 615         .mode_valid = psb_intel_lvds_mode_valid,
 616         .best_encoder = gma_best_encoder,
 617 };
 618
 619 const struct drm_connector_funcs psb_intel_lvds_connector_funcs = {
 620         .dpms = drm_helper_connector_dpms,
 621         .fill_modes = drm_helper_probe_single_connector_modes,
 622         .set_property = psb_intel_lvds_set_property,
 623         .destroy = psb_intel_lvds_destroy,
 624 };
 625
 626 /**
 627  * psb_intel_lvds_init - setup LVDS connectors on this device
 628  * @dev: drm device
 629  * @mode_dev: mode device
 630  *
 631  * Create the connector, register the LVDS DDC bus, and try to figure out what
 632  * modes we can display on the LVDS panel (if present).
 633  */
 634 void psb_intel_lvds_init(struct drm_device *dev,
 635                          struct psb_intel_mode_device *mode_dev)
 636 {
 637         struct gma_encoder *gma_encoder;
 638         struct gma_connector *gma_connector;
 639         struct psb_intel_lvds_priv *lvds_priv;
 640         struct drm_connector *connector;
 641         struct drm_encoder *encoder;
 642         struct drm_display_mode *scan;  /* *modes, *bios_mode; */
 643         struct drm_crtc *crtc;
 644         struct drm_psb_private *dev_priv = dev->dev_private;
 645         u32 lvds;
 646         int pipe;
 647
 648         gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL);
 649         if (!gma_encoder) {
 650                 dev_err(dev->dev, "gma_encoder allocation error\n");
 651                 return;
 652         }
 653
 654         gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL);
 655         if (!gma_connector) {
 656                 dev_err(dev->dev, "gma_connector allocation error\n");
 657                 goto failed_encoder;
 658         }
 659
 660         lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL);
 661         if (!lvds_priv) {
 662                 dev_err(dev->dev, "LVDS private allocation error\n");
 663                 goto failed_connector;
 664         }
 665
 666         gma_encoder->dev_priv = lvds_priv;
 667
 668         connector = &gma_connector->base;
 669         gma_connector->save = psb_intel_lvds_save;
 670         gma_connector->restore = psb_intel_lvds_restore;
 671
 672         encoder = &gma_encoder->base;
 673         drm_connector_init(dev, connector,
 674                            &psb_intel_lvds_connector_funcs,
 675                            DRM_MODE_CONNECTOR_LVDS);
 676
 677         drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS);
 678
 679         gma_connector_attach_encoder(gma_connector, gma_encoder);
 680         gma_encoder->type = INTEL_OUTPUT_LVDS;
 681
 682         drm_encoder_helper_add(encoder, &psb_intel_lvds_helper_funcs);
 683         drm_connector_helper_add(connector,
 684                                  &psb_intel_lvds_connector_helper_funcs);
 685         connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 686         connector->interlace_allowed = false;
 687         connector->doublescan_allowed = false;
 688
 689         /*Attach connector properties*/
 690         drm_object_attach_property(&connector->base,
 691                                       dev->mode_config.scaling_mode_property,
 692                                       DRM_MODE_SCALE_FULLSCREEN);
 693         drm_object_attach_property(&connector->base,
 694                                       dev_priv->backlight_property,
 695                                       BRIGHTNESS_MAX_LEVEL);
 696
 697         /*
 698          * Set up I2C bus
 699          * FIXME: distroy i2c_bus when exit
 700          */
 701         lvds_priv->i2c_bus = psb_intel_i2c_create(dev, GPIOB, "LVDSBLC_B");
 702         if (!lvds_priv->i2c_bus) {
 703                 dev_printk(KERN_ERR,
 704                         dev->dev, "I2C bus registration failed.\n");
 705                 goto failed_blc_i2c;
 706         }
 707         lvds_priv->i2c_bus->slave_addr = 0x2C;
 708         dev_priv->lvds_i2c_bus =  lvds_priv->i2c_bus;
 709
 710         /*
 711          * LVDS discovery:
 712          * 1) check for EDID on DDC
 713          * 2) check for VBT data
 714          * 3) check to see if LVDS is already on
 715          *    if none of the above, no panel
 716          * 4) make sure lid is open
 717          *    if closed, act like it's not there for now
 718          */
 719
 720         /* Set up the DDC bus. */
 721         lvds_priv->ddc_bus = psb_intel_i2c_create(dev, GPIOC, "LVDSDDC_C");
 722         if (!lvds_priv->ddc_bus) {
 723                 dev_printk(KERN_ERR, dev->dev,
 724                            "DDC bus registration " "failed.\n");
 725                 goto failed_ddc;
 726         }
 727
 728         /*
 729          * Attempt to get the fixed panel mode from DDC.  Assume that the
 730          * preferred mode is the right one.
 731          */
 732         mutex_lock(&dev->mode_config.mutex);
 733         psb_intel_ddc_get_modes(connector, &lvds_priv->ddc_bus->adapter);
 734         list_for_each_entry(scan, &connector->probed_modes, head) {
 735                 if (scan->type & DRM_MODE_TYPE_PREFERRED) {
 736                         mode_dev->panel_fixed_mode =
 737                             drm_mode_duplicate(dev, scan);
 738                         DRM_DEBUG_KMS("Using mode from DDC\n");
 739                         goto out;       /* FIXME: check for quirks */
 740                 }
 741         }
 742
 743         /* Failed to get EDID, what about VBT? do we need this? */
 744         if (dev_priv->lfp_lvds_vbt_mode) {
 745                 mode_dev->panel_fixed_mode =
 746                         drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
 747
 748                 if (mode_dev->panel_fixed_mode) {
 749                         mode_dev->panel_fixed_mode->type |=
 750                                 DRM_MODE_TYPE_PREFERRED;
 751                         DRM_DEBUG_KMS("Using mode from VBT\n");
 752                         goto out;
 753                 }
 754         }
 755
 756         /*
 757          * If we didn't get EDID, try checking if the panel is already turned
 758          * on.  If so, assume that whatever is currently programmed is the
 759          * correct mode.
 760          */
 761         lvds = REG_READ(LVDS);
 762         pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
 763         crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
 764
 765         if (crtc && (lvds & LVDS_PORT_EN)) {
 766                 mode_dev->panel_fixed_mode =
 767                     psb_intel_crtc_mode_get(dev, crtc);
 768                 if (mode_dev->panel_fixed_mode) {
 769                         mode_dev->panel_fixed_mode->type |=
 770                             DRM_MODE_TYPE_PREFERRED;
 771                         DRM_DEBUG_KMS("Using pre-programmed mode\n");
 772                         goto out;       /* FIXME: check for quirks */
 773                 }
 774         }
 775
 776         /* If we still don't have a mode after all that, give up. */
 777         if (!mode_dev->panel_fixed_mode) {
 778                 dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
 779                 goto failed_find;
 780         }
 781
 782         /*
 783          * Blacklist machines with BIOSes that list an LVDS panel without
 784          * actually having one.
 785          */
 786 out:
 787         mutex_unlock(&dev->mode_config.mutex);
 788         drm_connector_register(connector);
 789         return;
 790
 791 failed_find:
 792         mutex_unlock(&dev->mode_config.mutex);
 793         psb_intel_i2c_destroy(lvds_priv->ddc_bus);
 794 failed_ddc:
 795         psb_intel_i2c_destroy(lvds_priv->i2c_bus);
 796 failed_blc_i2c:
 797         drm_encoder_cleanup(encoder);
 798         drm_connector_cleanup(connector);
 799 failed_connector:
 800         kfree(gma_connector);
 801 failed_encoder:
 802         kfree(gma_encoder);
 803 }
 804