MIPS: Loongson64: Remove not used pci.c
[linux-2.6-microblaze.git] / drivers / gpu / drm / drm_mode_object.c
1 /*
2  * Copyright (c) 2016 Intel Corporation
3  *
4  * Permission to use, copy, modify, distribute, and sell this software and its
5  * documentation for any purpose is hereby granted without fee, provided that
6  * the above copyright notice appear in all copies and that both that copyright
7  * notice and this permission notice appear in supporting documentation, and
8  * that the name of the copyright holders not be used in advertising or
9  * publicity pertaining to distribution of the software without specific,
10  * written prior permission.  The copyright holders make no representations
11  * about the suitability of this software for any purpose.  It is provided "as
12  * is" without express or implied warranty.
13  *
14  * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15  * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16  * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17  * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18  * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20  * OF THIS SOFTWARE.
21  */
22
23 #include <linux/export.h>
24 #include <linux/uaccess.h>
25
26 #include <drm/drm_atomic.h>
27 #include <drm/drm_drv.h>
28 #include <drm/drm_device.h>
29 #include <drm/drm_file.h>
30 #include <drm/drm_mode_object.h>
31 #include <drm/drm_print.h>
32
33 #include "drm_crtc_internal.h"
34
35 /*
36  * Internal function to assign a slot in the object idr and optionally
37  * register the object into the idr.
38  */
39 int __drm_mode_object_add(struct drm_device *dev, struct drm_mode_object *obj,
40                           uint32_t obj_type, bool register_obj,
41                           void (*obj_free_cb)(struct kref *kref))
42 {
43         int ret;
44
45         WARN_ON(!dev->driver->load && dev->registered && !obj_free_cb);
46
47         mutex_lock(&dev->mode_config.idr_mutex);
48         ret = idr_alloc(&dev->mode_config.object_idr, register_obj ? obj : NULL,
49                         1, 0, GFP_KERNEL);
50         if (ret >= 0) {
51                 /*
52                  * Set up the object linking under the protection of the idr
53                  * lock so that other users can't see inconsistent state.
54                  */
55                 obj->id = ret;
56                 obj->type = obj_type;
57                 if (obj_free_cb) {
58                         obj->free_cb = obj_free_cb;
59                         kref_init(&obj->refcount);
60                 }
61         }
62         mutex_unlock(&dev->mode_config.idr_mutex);
63
64         return ret < 0 ? ret : 0;
65 }
66
67 /**
68  * drm_mode_object_add - allocate a new modeset identifier
69  * @dev: DRM device
70  * @obj: object pointer, used to generate unique ID
71  * @obj_type: object type
72  *
73  * Create a unique identifier based on @ptr in @dev's identifier space.  Used
74  * for tracking modes, CRTCs and connectors.
75  *
76  * Returns:
77  * Zero on success, error code on failure.
78  */
79 int drm_mode_object_add(struct drm_device *dev,
80                         struct drm_mode_object *obj, uint32_t obj_type)
81 {
82         return __drm_mode_object_add(dev, obj, obj_type, true, NULL);
83 }
84
85 void drm_mode_object_register(struct drm_device *dev,
86                               struct drm_mode_object *obj)
87 {
88         mutex_lock(&dev->mode_config.idr_mutex);
89         idr_replace(&dev->mode_config.object_idr, obj, obj->id);
90         mutex_unlock(&dev->mode_config.idr_mutex);
91 }
92
93 /**
94  * drm_mode_object_unregister - free a modeset identifer
95  * @dev: DRM device
96  * @object: object to free
97  *
98  * Free @id from @dev's unique identifier pool.
99  * This function can be called multiple times, and guards against
100  * multiple removals.
101  * These modeset identifiers are _not_ reference counted. Hence don't use this
102  * for reference counted modeset objects like framebuffers.
103  */
104 void drm_mode_object_unregister(struct drm_device *dev,
105                                 struct drm_mode_object *object)
106 {
107         WARN_ON(!dev->driver->load && dev->registered && !object->free_cb);
108
109         mutex_lock(&dev->mode_config.idr_mutex);
110         if (object->id) {
111                 idr_remove(&dev->mode_config.object_idr, object->id);
112                 object->id = 0;
113         }
114         mutex_unlock(&dev->mode_config.idr_mutex);
115 }
116
117 /**
118  * drm_lease_required - check types which must be leased to be used
119  * @type: type of object
120  *
121  * Returns whether the provided type of drm_mode_object must
122  * be owned or leased to be used by a process.
123  */
124 bool drm_mode_object_lease_required(uint32_t type)
125 {
126         switch(type) {
127         case DRM_MODE_OBJECT_CRTC:
128         case DRM_MODE_OBJECT_CONNECTOR:
129         case DRM_MODE_OBJECT_PLANE:
130                 return true;
131         default:
132                 return false;
133         }
134 }
135
136 struct drm_mode_object *__drm_mode_object_find(struct drm_device *dev,
137                                                struct drm_file *file_priv,
138                                                uint32_t id, uint32_t type)
139 {
140         struct drm_mode_object *obj = NULL;
141
142         mutex_lock(&dev->mode_config.idr_mutex);
143         obj = idr_find(&dev->mode_config.object_idr, id);
144         if (obj && type != DRM_MODE_OBJECT_ANY && obj->type != type)
145                 obj = NULL;
146         if (obj && obj->id != id)
147                 obj = NULL;
148
149         if (obj && drm_mode_object_lease_required(obj->type) &&
150             !_drm_lease_held(file_priv, obj->id))
151                 obj = NULL;
152
153         if (obj && obj->free_cb) {
154                 if (!kref_get_unless_zero(&obj->refcount))
155                         obj = NULL;
156         }
157         mutex_unlock(&dev->mode_config.idr_mutex);
158
159         return obj;
160 }
161
162 /**
163  * drm_mode_object_find - look up a drm object with static lifetime
164  * @dev: drm device
165  * @file_priv: drm file
166  * @id: id of the mode object
167  * @type: type of the mode object
168  *
169  * This function is used to look up a modeset object. It will acquire a
170  * reference for reference counted objects. This reference must be dropped again
171  * by callind drm_mode_object_put().
172  */
173 struct drm_mode_object *drm_mode_object_find(struct drm_device *dev,
174                 struct drm_file *file_priv,
175                 uint32_t id, uint32_t type)
176 {
177         struct drm_mode_object *obj = NULL;
178
179         obj = __drm_mode_object_find(dev, file_priv, id, type);
180         return obj;
181 }
182 EXPORT_SYMBOL(drm_mode_object_find);
183
184 /**
185  * drm_mode_object_put - release a mode object reference
186  * @obj: DRM mode object
187  *
188  * This function decrements the object's refcount if it is a refcounted modeset
189  * object. It is a no-op on any other object. This is used to drop references
190  * acquired with drm_mode_object_get().
191  */
192 void drm_mode_object_put(struct drm_mode_object *obj)
193 {
194         if (obj->free_cb) {
195                 DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, kref_read(&obj->refcount));
196                 kref_put(&obj->refcount, obj->free_cb);
197         }
198 }
199 EXPORT_SYMBOL(drm_mode_object_put);
200
201 /**
202  * drm_mode_object_get - acquire a mode object reference
203  * @obj: DRM mode object
204  *
205  * This function increments the object's refcount if it is a refcounted modeset
206  * object. It is a no-op on any other object. References should be dropped again
207  * by calling drm_mode_object_put().
208  */
209 void drm_mode_object_get(struct drm_mode_object *obj)
210 {
211         if (obj->free_cb) {
212                 DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, kref_read(&obj->refcount));
213                 kref_get(&obj->refcount);
214         }
215 }
216 EXPORT_SYMBOL(drm_mode_object_get);
217
218 /**
219  * drm_object_attach_property - attach a property to a modeset object
220  * @obj: drm modeset object
221  * @property: property to attach
222  * @init_val: initial value of the property
223  *
224  * This attaches the given property to the modeset object with the given initial
225  * value. Currently this function cannot fail since the properties are stored in
226  * a statically sized array.
227  *
228  * Note that all properties must be attached before the object itself is
229  * registered and accessible from userspace.
230  */
231 void drm_object_attach_property(struct drm_mode_object *obj,
232                                 struct drm_property *property,
233                                 uint64_t init_val)
234 {
235         int count = obj->properties->count;
236         struct drm_device *dev = property->dev;
237
238
239         if (obj->type == DRM_MODE_OBJECT_CONNECTOR) {
240                 struct drm_connector *connector = obj_to_connector(obj);
241
242                 WARN_ON(!dev->driver->load &&
243                         connector->registration_state == DRM_CONNECTOR_REGISTERED);
244         } else {
245                 WARN_ON(!dev->driver->load && dev->registered);
246         }
247
248         if (count == DRM_OBJECT_MAX_PROPERTY) {
249                 WARN(1, "Failed to attach object property (type: 0x%x). Please "
250                         "increase DRM_OBJECT_MAX_PROPERTY by 1 for each time "
251                         "you see this message on the same object type.\n",
252                         obj->type);
253                 return;
254         }
255
256         obj->properties->properties[count] = property;
257         obj->properties->values[count] = init_val;
258         obj->properties->count++;
259 }
260 EXPORT_SYMBOL(drm_object_attach_property);
261
262 /**
263  * drm_object_property_set_value - set the value of a property
264  * @obj: drm mode object to set property value for
265  * @property: property to set
266  * @val: value the property should be set to
267  *
268  * This function sets a given property on a given object. This function only
269  * changes the software state of the property, it does not call into the
270  * driver's ->set_property callback.
271  *
272  * Note that atomic drivers should not have any need to call this, the core will
273  * ensure consistency of values reported back to userspace through the
274  * appropriate ->atomic_get_property callback. Only legacy drivers should call
275  * this function to update the tracked value (after clamping and other
276  * restrictions have been applied).
277  *
278  * Returns:
279  * Zero on success, error code on failure.
280  */
281 int drm_object_property_set_value(struct drm_mode_object *obj,
282                                   struct drm_property *property, uint64_t val)
283 {
284         int i;
285
286         WARN_ON(drm_drv_uses_atomic_modeset(property->dev) &&
287                 !(property->flags & DRM_MODE_PROP_IMMUTABLE));
288
289         for (i = 0; i < obj->properties->count; i++) {
290                 if (obj->properties->properties[i] == property) {
291                         obj->properties->values[i] = val;
292                         return 0;
293                 }
294         }
295
296         return -EINVAL;
297 }
298 EXPORT_SYMBOL(drm_object_property_set_value);
299
300 static int __drm_object_property_get_value(struct drm_mode_object *obj,
301                                            struct drm_property *property,
302                                            uint64_t *val)
303 {
304         int i;
305
306         /* read-only properties bypass atomic mechanism and still store
307          * their value in obj->properties->values[].. mostly to avoid
308          * having to deal w/ EDID and similar props in atomic paths:
309          */
310         if (drm_drv_uses_atomic_modeset(property->dev) &&
311                         !(property->flags & DRM_MODE_PROP_IMMUTABLE))
312                 return drm_atomic_get_property(obj, property, val);
313
314         for (i = 0; i < obj->properties->count; i++) {
315                 if (obj->properties->properties[i] == property) {
316                         *val = obj->properties->values[i];
317                         return 0;
318                 }
319
320         }
321
322         return -EINVAL;
323 }
324
325 /**
326  * drm_object_property_get_value - retrieve the value of a property
327  * @obj: drm mode object to get property value from
328  * @property: property to retrieve
329  * @val: storage for the property value
330  *
331  * This function retrieves the softare state of the given property for the given
332  * property. Since there is no driver callback to retrieve the current property
333  * value this might be out of sync with the hardware, depending upon the driver
334  * and property.
335  *
336  * Atomic drivers should never call this function directly, the core will read
337  * out property values through the various ->atomic_get_property callbacks.
338  *
339  * Returns:
340  * Zero on success, error code on failure.
341  */
342 int drm_object_property_get_value(struct drm_mode_object *obj,
343                                   struct drm_property *property, uint64_t *val)
344 {
345         WARN_ON(drm_drv_uses_atomic_modeset(property->dev));
346
347         return __drm_object_property_get_value(obj, property, val);
348 }
349 EXPORT_SYMBOL(drm_object_property_get_value);
350
351 /* helper for getconnector and getproperties ioctls */
352 int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic,
353                                    uint32_t __user *prop_ptr,
354                                    uint64_t __user *prop_values,
355                                    uint32_t *arg_count_props)
356 {
357         int i, ret, count;
358
359         for (i = 0, count = 0; i < obj->properties->count; i++) {
360                 struct drm_property *prop = obj->properties->properties[i];
361                 uint64_t val;
362
363                 if ((prop->flags & DRM_MODE_PROP_ATOMIC) && !atomic)
364                         continue;
365
366                 if (*arg_count_props > count) {
367                         ret = __drm_object_property_get_value(obj, prop, &val);
368                         if (ret)
369                                 return ret;
370
371                         if (put_user(prop->base.id, prop_ptr + count))
372                                 return -EFAULT;
373
374                         if (put_user(val, prop_values + count))
375                                 return -EFAULT;
376                 }
377
378                 count++;
379         }
380         *arg_count_props = count;
381
382         return 0;
383 }
384
385 /**
386  * drm_mode_obj_get_properties_ioctl - get the current value of a object's property
387  * @dev: DRM device
388  * @data: ioctl data
389  * @file_priv: DRM file info
390  *
391  * This function retrieves the current value for an object's property. Compared
392  * to the connector specific ioctl this one is extended to also work on crtc and
393  * plane objects.
394  *
395  * Called by the user via ioctl.
396  *
397  * Returns:
398  * Zero on success, negative errno on failure.
399  */
400 int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data,
401                                       struct drm_file *file_priv)
402 {
403         struct drm_mode_obj_get_properties *arg = data;
404         struct drm_mode_object *obj;
405         int ret = 0;
406
407         if (!drm_core_check_feature(dev, DRIVER_MODESET))
408                 return -EOPNOTSUPP;
409
410         drm_modeset_lock_all(dev);
411
412         obj = drm_mode_object_find(dev, file_priv, arg->obj_id, arg->obj_type);
413         if (!obj) {
414                 ret = -ENOENT;
415                 goto out;
416         }
417         if (!obj->properties) {
418                 ret = -EINVAL;
419                 goto out_unref;
420         }
421
422         ret = drm_mode_object_get_properties(obj, file_priv->atomic,
423                         (uint32_t __user *)(unsigned long)(arg->props_ptr),
424                         (uint64_t __user *)(unsigned long)(arg->prop_values_ptr),
425                         &arg->count_props);
426
427 out_unref:
428         drm_mode_object_put(obj);
429 out:
430         drm_modeset_unlock_all(dev);
431         return ret;
432 }
433
434 struct drm_property *drm_mode_obj_find_prop_id(struct drm_mode_object *obj,
435                                                uint32_t prop_id)
436 {
437         int i;
438
439         for (i = 0; i < obj->properties->count; i++)
440                 if (obj->properties->properties[i]->base.id == prop_id)
441                         return obj->properties->properties[i];
442
443         return NULL;
444 }
445
446 static int set_property_legacy(struct drm_mode_object *obj,
447                                struct drm_property *prop,
448                                uint64_t prop_value)
449 {
450         struct drm_device *dev = prop->dev;
451         struct drm_mode_object *ref;
452         int ret = -EINVAL;
453
454         if (!drm_property_change_valid_get(prop, prop_value, &ref))
455                 return -EINVAL;
456
457         drm_modeset_lock_all(dev);
458         switch (obj->type) {
459         case DRM_MODE_OBJECT_CONNECTOR:
460                 ret = drm_connector_set_obj_prop(obj, prop, prop_value);
461                 break;
462         case DRM_MODE_OBJECT_CRTC:
463                 ret = drm_mode_crtc_set_obj_prop(obj, prop, prop_value);
464                 break;
465         case DRM_MODE_OBJECT_PLANE:
466                 ret = drm_mode_plane_set_obj_prop(obj_to_plane(obj),
467                                                   prop, prop_value);
468                 break;
469         }
470         drm_property_change_valid_put(prop, ref);
471         drm_modeset_unlock_all(dev);
472
473         return ret;
474 }
475
476 static int set_property_atomic(struct drm_mode_object *obj,
477                                struct drm_file *file_priv,
478                                struct drm_property *prop,
479                                uint64_t prop_value)
480 {
481         struct drm_device *dev = prop->dev;
482         struct drm_atomic_state *state;
483         struct drm_modeset_acquire_ctx ctx;
484         int ret;
485
486         state = drm_atomic_state_alloc(dev);
487         if (!state)
488                 return -ENOMEM;
489
490         drm_modeset_acquire_init(&ctx, 0);
491         state->acquire_ctx = &ctx;
492
493 retry:
494         if (prop == state->dev->mode_config.dpms_property) {
495                 if (obj->type != DRM_MODE_OBJECT_CONNECTOR) {
496                         ret = -EINVAL;
497                         goto out;
498                 }
499
500                 ret = drm_atomic_connector_commit_dpms(state,
501                                                        obj_to_connector(obj),
502                                                        prop_value);
503         } else {
504                 ret = drm_atomic_set_property(state, file_priv, obj, prop, prop_value);
505                 if (ret)
506                         goto out;
507                 ret = drm_atomic_commit(state);
508         }
509 out:
510         if (ret == -EDEADLK) {
511                 drm_atomic_state_clear(state);
512                 drm_modeset_backoff(&ctx);
513                 goto retry;
514         }
515
516         drm_atomic_state_put(state);
517
518         drm_modeset_drop_locks(&ctx);
519         drm_modeset_acquire_fini(&ctx);
520
521         return ret;
522 }
523
524 int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
525                                     struct drm_file *file_priv)
526 {
527         struct drm_mode_obj_set_property *arg = data;
528         struct drm_mode_object *arg_obj;
529         struct drm_property *property;
530         int ret = -EINVAL;
531
532         if (!drm_core_check_feature(dev, DRIVER_MODESET))
533                 return -EOPNOTSUPP;
534
535         arg_obj = drm_mode_object_find(dev, file_priv, arg->obj_id, arg->obj_type);
536         if (!arg_obj)
537                 return -ENOENT;
538
539         if (!arg_obj->properties)
540                 goto out_unref;
541
542         property = drm_mode_obj_find_prop_id(arg_obj, arg->prop_id);
543         if (!property)
544                 goto out_unref;
545
546         if (drm_drv_uses_atomic_modeset(property->dev))
547                 ret = set_property_atomic(arg_obj, file_priv, property, arg->value);
548         else
549                 ret = set_property_legacy(arg_obj, property, arg->value);
550
551 out_unref:
552         drm_mode_object_put(arg_obj);
553         return ret;
554 }