drivers/gpu/drm/drm_client_modeset.c

   1 // SPDX-License-Identifier: MIT
   2 /*
   3  * Copyright 2018 Noralf Trønnes
   4  * Copyright (c) 2006-2009 Red Hat Inc.
   5  * Copyright (c) 2006-2008 Intel Corporation
   6  *   Jesse Barnes <jesse.barnes@intel.com>
   7  * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
   8  */
   9
  10 #include <linux/module.h>
  11 #include <linux/mutex.h>
  12 #include <linux/slab.h>
  13
  14 #include <drm/drm_atomic.h>
  15 #include <drm/drm_client.h>
  16 #include <drm/drm_connector.h>
  17 #include <drm/drm_crtc.h>
  18 #include <drm/drm_device.h>
  19 #include <drm/drm_drv.h>
  20 #include <drm/drm_encoder.h>
  21 #include <drm/drm_print.h>
  22
  23 #include "drm_crtc_internal.h"
  24 #include "drm_internal.h"
  25
  26 #define DRM_CLIENT_MAX_CLONED_CONNECTORS        8
  27
  28 struct drm_client_offset {
  29         int x, y;
  30 };
  31
  32 int drm_client_modeset_create(struct drm_client_dev *client)
  33 {
  34         struct drm_device *dev = client->dev;
  35         unsigned int num_crtc = dev->mode_config.num_crtc;
  36         unsigned int max_connector_count = 1;
  37         struct drm_mode_set *modeset;
  38         struct drm_crtc *crtc;
  39         unsigned int i = 0;
  40
  41         /* Add terminating zero entry to enable index less iteration */
  42         client->modesets = kcalloc(num_crtc + 1, sizeof(*client->modesets), GFP_KERNEL);
  43         if (!client->modesets)
  44                 return -ENOMEM;
  45
  46         mutex_init(&client->modeset_mutex);
  47
  48         drm_for_each_crtc(crtc, dev)
  49                 client->modesets[i++].crtc = crtc;
  50
  51         /* Cloning is only supported in the single crtc case. */
  52         if (num_crtc == 1)
  53                 max_connector_count = DRM_CLIENT_MAX_CLONED_CONNECTORS;
  54
  55         for (modeset = client->modesets; modeset->crtc; modeset++) {
  56                 modeset->connectors = kcalloc(max_connector_count,
  57                                               sizeof(*modeset->connectors), GFP_KERNEL);
  58                 if (!modeset->connectors)
  59                         goto err_free;
  60         }
  61
  62         return 0;
  63
  64 err_free:
  65         drm_client_modeset_free(client);
  66
  67         return -ENOMEM;
  68 }
  69
  70 static void drm_client_modeset_release(struct drm_client_dev *client)
  71 {
  72         struct drm_mode_set *modeset;
  73         unsigned int i;
  74
  75         drm_client_for_each_modeset(modeset, client) {
  76                 drm_mode_destroy(client->dev, modeset->mode);
  77                 modeset->mode = NULL;
  78                 modeset->fb = NULL;
  79
  80                 for (i = 0; i < modeset->num_connectors; i++) {
  81                         drm_connector_put(modeset->connectors[i]);
  82                         modeset->connectors[i] = NULL;
  83                 }
  84                 modeset->num_connectors = 0;
  85         }
  86 }
  87
  88 void drm_client_modeset_free(struct drm_client_dev *client)
  89 {
  90         struct drm_mode_set *modeset;
  91
  92         mutex_lock(&client->modeset_mutex);
  93
  94         drm_client_modeset_release(client);
  95
  96         drm_client_for_each_modeset(modeset, client)
  97                 kfree(modeset->connectors);
  98
  99         mutex_unlock(&client->modeset_mutex);
 100
 101         mutex_destroy(&client->modeset_mutex);
 102         kfree(client->modesets);
 103 }
 104
 105 static struct drm_mode_set *
 106 drm_client_find_modeset(struct drm_client_dev *client, struct drm_crtc *crtc)
 107 {
 108         struct drm_mode_set *modeset;
 109
 110         drm_client_for_each_modeset(modeset, client)
 111                 if (modeset->crtc == crtc)
 112                         return modeset;
 113
 114         return NULL;
 115 }
 116
 117 static struct drm_display_mode *
 118 drm_connector_get_tiled_mode(struct drm_connector *connector)
 119 {
 120         struct drm_display_mode *mode;
 121
 122         list_for_each_entry(mode, &connector->modes, head) {
 123                 if (mode->hdisplay == connector->tile_h_size &&
 124                     mode->vdisplay == connector->tile_v_size)
 125                         return mode;
 126         }
 127         return NULL;
 128 }
 129
 130 static struct drm_display_mode *
 131 drm_connector_fallback_non_tiled_mode(struct drm_connector *connector)
 132 {
 133         struct drm_display_mode *mode;
 134
 135         list_for_each_entry(mode, &connector->modes, head) {
 136                 if (mode->hdisplay == connector->tile_h_size &&
 137                     mode->vdisplay == connector->tile_v_size)
 138                         continue;
 139                 return mode;
 140         }
 141         return NULL;
 142 }
 143
 144 static struct drm_display_mode *
 145 drm_connector_has_preferred_mode(struct drm_connector *connector, int width, int height)
 146 {
 147         struct drm_display_mode *mode;
 148
 149         list_for_each_entry(mode, &connector->modes, head) {
 150                 if (mode->hdisplay > width ||
 151                     mode->vdisplay > height)
 152                         continue;
 153                 if (mode->type & DRM_MODE_TYPE_PREFERRED)
 154                         return mode;
 155         }
 156         return NULL;
 157 }
 158
 159 static struct drm_display_mode *
 160 drm_connector_pick_cmdline_mode(struct drm_connector *connector)
 161 {
 162         struct drm_cmdline_mode *cmdline_mode;
 163         struct drm_display_mode *mode;
 164         bool prefer_non_interlace;
 165
 166         cmdline_mode = &connector->cmdline_mode;
 167         if (cmdline_mode->specified == false)
 168                 return NULL;
 169
 170         /* attempt to find a matching mode in the list of modes
 171          *  we have gotten so far, if not add a CVT mode that conforms
 172          */
 173         if (cmdline_mode->rb || cmdline_mode->margins)
 174                 goto create_mode;
 175
 176         prefer_non_interlace = !cmdline_mode->interlace;
 177 again:
 178         list_for_each_entry(mode, &connector->modes, head) {
 179                 /* Check (optional) mode name first */
 180                 if (!strcmp(mode->name, cmdline_mode->name))
 181                         return mode;
 182
 183                 /* check width/height */
 184                 if (mode->hdisplay != cmdline_mode->xres ||
 185                     mode->vdisplay != cmdline_mode->yres)
 186                         continue;
 187
 188                 if (cmdline_mode->refresh_specified) {
 189                         if (mode->vrefresh != cmdline_mode->refresh)
 190                                 continue;
 191                 }
 192
 193                 if (cmdline_mode->interlace) {
 194                         if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
 195                                 continue;
 196                 } else if (prefer_non_interlace) {
 197                         if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 198                                 continue;
 199                 }
 200                 return mode;
 201         }
 202
 203         if (prefer_non_interlace) {
 204                 prefer_non_interlace = false;
 205                 goto again;
 206         }
 207
 208 create_mode:
 209         mode = drm_mode_create_from_cmdline_mode(connector->dev, cmdline_mode);
 210         if (mode)
 211                 list_add(&mode->head, &connector->modes);
 212
 213         return mode;
 214 }
 215
 216 static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
 217 {
 218         bool enable;
 219
 220         if (connector->display_info.non_desktop)
 221                 return false;
 222
 223         if (strict)
 224                 enable = connector->status == connector_status_connected;
 225         else
 226                 enable = connector->status != connector_status_disconnected;
 227
 228         return enable;
 229 }
 230
 231 static void drm_client_connectors_enabled(struct drm_connector **connectors,
 232                                           unsigned int connector_count,
 233                                           bool *enabled)
 234 {
 235         bool any_enabled = false;
 236         struct drm_connector *connector;
 237         int i = 0;
 238
 239         for (i = 0; i < connector_count; i++) {
 240                 connector = connectors[i];
 241                 enabled[i] = drm_connector_enabled(connector, true);
 242                 DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id,
 243                               connector->display_info.non_desktop ? "non desktop" : enabled[i] ? "yes" : "no");
 244
 245                 any_enabled |= enabled[i];
 246         }
 247
 248         if (any_enabled)
 249                 return;
 250
 251         for (i = 0; i < connector_count; i++)
 252                 enabled[i] = drm_connector_enabled(connectors[i], false);
 253 }
 254
 255 static bool drm_client_target_cloned(struct drm_device *dev,
 256                                      struct drm_connector **connectors,
 257                                      unsigned int connector_count,
 258                                      struct drm_display_mode **modes,
 259                                      struct drm_client_offset *offsets,
 260                                      bool *enabled, int width, int height)
 261 {
 262         int count, i, j;
 263         bool can_clone = false;
 264         struct drm_display_mode *dmt_mode, *mode;
 265
 266         /* only contemplate cloning in the single crtc case */
 267         if (dev->mode_config.num_crtc > 1)
 268                 return false;
 269
 270         count = 0;
 271         for (i = 0; i < connector_count; i++) {
 272                 if (enabled[i])
 273                         count++;
 274         }
 275
 276         /* only contemplate cloning if more than one connector is enabled */
 277         if (count <= 1)
 278                 return false;
 279
 280         /* check the command line or if nothing common pick 1024x768 */
 281         can_clone = true;
 282         for (i = 0; i < connector_count; i++) {
 283                 if (!enabled[i])
 284                         continue;
 285                 modes[i] = drm_connector_pick_cmdline_mode(connectors[i]);
 286                 if (!modes[i]) {
 287                         can_clone = false;
 288                         break;
 289                 }
 290                 for (j = 0; j < i; j++) {
 291                         if (!enabled[j])
 292                                 continue;
 293                         if (!drm_mode_match(modes[j], modes[i],
 294                                             DRM_MODE_MATCH_TIMINGS |
 295                                             DRM_MODE_MATCH_CLOCK |
 296                                             DRM_MODE_MATCH_FLAGS |
 297                                             DRM_MODE_MATCH_3D_FLAGS))
 298                                 can_clone = false;
 299                 }
 300         }
 301
 302         if (can_clone) {
 303                 DRM_DEBUG_KMS("can clone using command line\n");
 304                 return true;
 305         }
 306
 307         /* try and find a 1024x768 mode on each connector */
 308         can_clone = true;
 309         dmt_mode = drm_mode_find_dmt(dev, 1024, 768, 60, false);
 310
 311         for (i = 0; i < connector_count; i++) {
 312                 if (!enabled[i])
 313                         continue;
 314
 315                 list_for_each_entry(mode, &connectors[i]->modes, head) {
 316                         if (drm_mode_match(mode, dmt_mode,
 317                                            DRM_MODE_MATCH_TIMINGS |
 318                                            DRM_MODE_MATCH_CLOCK |
 319                                            DRM_MODE_MATCH_FLAGS |
 320                                            DRM_MODE_MATCH_3D_FLAGS))
 321                                 modes[i] = mode;
 322                 }
 323                 if (!modes[i])
 324                         can_clone = false;
 325         }
 326
 327         if (can_clone) {
 328                 DRM_DEBUG_KMS("can clone using 1024x768\n");
 329                 return true;
 330         }
 331         DRM_INFO("kms: can't enable cloning when we probably wanted to.\n");
 332         return false;
 333 }
 334
 335 static int drm_client_get_tile_offsets(struct drm_connector **connectors,
 336                                        unsigned int connector_count,
 337                                        struct drm_display_mode **modes,
 338                                        struct drm_client_offset *offsets,
 339                                        int idx,
 340                                        int h_idx, int v_idx)
 341 {
 342         struct drm_connector *connector;
 343         int i;
 344         int hoffset = 0, voffset = 0;
 345
 346         for (i = 0; i < connector_count; i++) {
 347                 connector = connectors[i];
 348                 if (!connector->has_tile)
 349                         continue;
 350
 351                 if (!modes[i] && (h_idx || v_idx)) {
 352                         DRM_DEBUG_KMS("no modes for connector tiled %d %d\n", i,
 353                                       connector->base.id);
 354                         continue;
 355                 }
 356                 if (connector->tile_h_loc < h_idx)
 357                         hoffset += modes[i]->hdisplay;
 358
 359                 if (connector->tile_v_loc < v_idx)
 360                         voffset += modes[i]->vdisplay;
 361         }
 362         offsets[idx].x = hoffset;
 363         offsets[idx].y = voffset;
 364         DRM_DEBUG_KMS("returned %d %d for %d %d\n", hoffset, voffset, h_idx, v_idx);
 365         return 0;
 366 }
 367
 368 static bool drm_client_target_preferred(struct drm_connector **connectors,
 369                                         unsigned int connector_count,
 370                                         struct drm_display_mode **modes,
 371                                         struct drm_client_offset *offsets,
 372                                         bool *enabled, int width, int height)
 373 {
 374         const u64 mask = BIT_ULL(connector_count) - 1;
 375         struct drm_connector *connector;
 376         u64 conn_configured = 0;
 377         int tile_pass = 0;
 378         int num_tiled_conns = 0;
 379         int i;
 380
 381         for (i = 0; i < connector_count; i++) {
 382                 if (connectors[i]->has_tile &&
 383                     connectors[i]->status == connector_status_connected)
 384                         num_tiled_conns++;
 385         }
 386
 387 retry:
 388         for (i = 0; i < connector_count; i++) {
 389                 connector = connectors[i];
 390
 391                 if (conn_configured & BIT_ULL(i))
 392                         continue;
 393
 394                 if (enabled[i] == false) {
 395                         conn_configured |= BIT_ULL(i);
 396                         continue;
 397                 }
 398
 399                 /* first pass over all the untiled connectors */
 400                 if (tile_pass == 0 && connector->has_tile)
 401                         continue;
 402
 403                 if (tile_pass == 1) {
 404                         if (connector->tile_h_loc != 0 ||
 405                             connector->tile_v_loc != 0)
 406                                 continue;
 407
 408                 } else {
 409                         if (connector->tile_h_loc != tile_pass - 1 &&
 410                             connector->tile_v_loc != tile_pass - 1)
 411                         /* if this tile_pass doesn't cover any of the tiles - keep going */
 412                                 continue;
 413
 414                         /*
 415                          * find the tile offsets for this pass - need to find
 416                          * all tiles left and above
 417                          */
 418                         drm_client_get_tile_offsets(connectors, connector_count, modes, offsets, i,
 419                                                     connector->tile_h_loc, connector->tile_v_loc);
 420                 }
 421                 DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
 422                               connector->base.id);
 423
 424                 /* got for command line mode first */
 425                 modes[i] = drm_connector_pick_cmdline_mode(connector);
 426                 if (!modes[i]) {
 427                         DRM_DEBUG_KMS("looking for preferred mode on connector %d %d\n",
 428                                       connector->base.id, connector->tile_group ? connector->tile_group->id : 0);
 429                         modes[i] = drm_connector_has_preferred_mode(connector, width, height);
 430                 }
 431                 /* No preferred modes, pick one off the list */
 432                 if (!modes[i] && !list_empty(&connector->modes)) {
 433                         list_for_each_entry(modes[i], &connector->modes, head)
 434                                 break;
 435                 }
 436                 /*
 437                  * In case of tiled mode if all tiles not present fallback to
 438                  * first available non tiled mode.
 439                  * After all tiles are present, try to find the tiled mode
 440                  * for all and if tiled mode not present due to fbcon size
 441                  * limitations, use first non tiled mode only for
 442                  * tile 0,0 and set to no mode for all other tiles.
 443                  */
 444                 if (connector->has_tile) {
 445                         if (num_tiled_conns <
 446                             connector->num_h_tile * connector->num_v_tile ||
 447                             (connector->tile_h_loc == 0 &&
 448                              connector->tile_v_loc == 0 &&
 449                              !drm_connector_get_tiled_mode(connector))) {
 450                                 DRM_DEBUG_KMS("Falling back to non tiled mode on Connector %d\n",
 451                                               connector->base.id);
 452                                 modes[i] = drm_connector_fallback_non_tiled_mode(connector);
 453                         } else {
 454                                 modes[i] = drm_connector_get_tiled_mode(connector);
 455                         }
 456                 }
 457
 458                 DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name :
 459                           "none");
 460                 conn_configured |= BIT_ULL(i);
 461         }
 462
 463         if ((conn_configured & mask) != mask) {
 464                 tile_pass++;
 465                 goto retry;
 466         }
 467         return true;
 468 }
 469
 470 static bool connector_has_possible_crtc(struct drm_connector *connector,
 471                                         struct drm_crtc *crtc)
 472 {
 473         struct drm_encoder *encoder;
 474
 475         drm_connector_for_each_possible_encoder(connector, encoder) {
 476                 if (encoder->possible_crtcs & drm_crtc_mask(crtc))
 477                         return true;
 478         }
 479
 480         return false;
 481 }
 482
 483 static int drm_client_pick_crtcs(struct drm_client_dev *client,
 484                                  struct drm_connector **connectors,
 485                                  unsigned int connector_count,
 486                                  struct drm_crtc **best_crtcs,
 487                                  struct drm_display_mode **modes,
 488                                  int n, int width, int height)
 489 {
 490         struct drm_device *dev = client->dev;
 491         struct drm_connector *connector;
 492         int my_score, best_score, score;
 493         struct drm_crtc **crtcs, *crtc;
 494         struct drm_mode_set *modeset;
 495         int o;
 496
 497         if (n == connector_count)
 498                 return 0;
 499
 500         connector = connectors[n];
 501
 502         best_crtcs[n] = NULL;
 503         best_score = drm_client_pick_crtcs(client, connectors, connector_count,
 504                                            best_crtcs, modes, n + 1, width, height);
 505         if (modes[n] == NULL)
 506                 return best_score;
 507
 508         crtcs = kcalloc(connector_count, sizeof(*crtcs), GFP_KERNEL);
 509         if (!crtcs)
 510                 return best_score;
 511
 512         my_score = 1;
 513         if (connector->status == connector_status_connected)
 514                 my_score++;
 515         if (connector->cmdline_mode.specified)
 516                 my_score++;
 517         if (drm_connector_has_preferred_mode(connector, width, height))
 518                 my_score++;
 519
 520         /*
 521          * select a crtc for this connector and then attempt to configure
 522          * remaining connectors
 523          */
 524         drm_client_for_each_modeset(modeset, client) {
 525                 crtc = modeset->crtc;
 526
 527                 if (!connector_has_possible_crtc(connector, crtc))
 528                         continue;
 529
 530                 for (o = 0; o < n; o++)
 531                         if (best_crtcs[o] == crtc)
 532                                 break;
 533
 534                 if (o < n) {
 535                         /* ignore cloning unless only a single crtc */
 536                         if (dev->mode_config.num_crtc > 1)
 537                                 continue;
 538
 539                         if (!drm_mode_equal(modes[o], modes[n]))
 540                                 continue;
 541                 }
 542
 543                 crtcs[n] = crtc;
 544                 memcpy(crtcs, best_crtcs, n * sizeof(*crtcs));
 545                 score = my_score + drm_client_pick_crtcs(client, connectors, connector_count,
 546                                                          crtcs, modes, n + 1, width, height);
 547                 if (score > best_score) {
 548                         best_score = score;
 549                         memcpy(best_crtcs, crtcs, connector_count * sizeof(*crtcs));
 550                 }
 551         }
 552
 553         kfree(crtcs);
 554         return best_score;
 555 }
 556
 557 /* Try to read the BIOS display configuration and use it for the initial config */
 558 static bool drm_client_firmware_config(struct drm_client_dev *client,
 559                                        struct drm_connector **connectors,
 560                                        unsigned int connector_count,
 561                                        struct drm_crtc **crtcs,
 562                                        struct drm_display_mode **modes,
 563                                        struct drm_client_offset *offsets,
 564                                        bool *enabled, int width, int height)
 565 {
 566         unsigned int count = min_t(unsigned int, connector_count, BITS_PER_LONG);
 567         unsigned long conn_configured, conn_seq, mask;
 568         struct drm_device *dev = client->dev;
 569         int i, j;
 570         bool *save_enabled;
 571         bool fallback = true, ret = true;
 572         int num_connectors_enabled = 0;
 573         int num_connectors_detected = 0;
 574         int num_tiled_conns = 0;
 575         struct drm_modeset_acquire_ctx ctx;
 576
 577         if (!drm_drv_uses_atomic_modeset(dev))
 578                 return false;
 579
 580         save_enabled = kcalloc(count, sizeof(bool), GFP_KERNEL);
 581         if (!save_enabled)
 582                 return false;
 583
 584         drm_modeset_acquire_init(&ctx, 0);
 585
 586         while (drm_modeset_lock_all_ctx(dev, &ctx) != 0)
 587                 drm_modeset_backoff(&ctx);
 588
 589         memcpy(save_enabled, enabled, count);
 590         mask = GENMASK(count - 1, 0);
 591         conn_configured = 0;
 592         for (i = 0; i < count; i++) {
 593                 if (connectors[i]->has_tile &&
 594                     connectors[i]->status == connector_status_connected)
 595                         num_tiled_conns++;
 596         }
 597 retry:
 598         conn_seq = conn_configured;
 599         for (i = 0; i < count; i++) {
 600                 struct drm_connector *connector;
 601                 struct drm_encoder *encoder;
 602                 struct drm_crtc *new_crtc;
 603
 604                 connector = connectors[i];
 605
 606                 if (conn_configured & BIT(i))
 607                         continue;
 608
 609                 if (conn_seq == 0 && !connector->has_tile)
 610                         continue;
 611
 612                 if (connector->status == connector_status_connected)
 613                         num_connectors_detected++;
 614
 615                 if (!enabled[i]) {
 616                         DRM_DEBUG_KMS("connector %s not enabled, skipping\n",
 617                                       connector->name);
 618                         conn_configured |= BIT(i);
 619                         continue;
 620                 }
 621
 622                 if (connector->force == DRM_FORCE_OFF) {
 623                         DRM_DEBUG_KMS("connector %s is disabled by user, skipping\n",
 624                                       connector->name);
 625                         enabled[i] = false;
 626                         continue;
 627                 }
 628
 629                 encoder = connector->state->best_encoder;
 630                 if (!encoder || WARN_ON(!connector->state->crtc)) {
 631                         if (connector->force > DRM_FORCE_OFF)
 632                                 goto bail;
 633
 634                         DRM_DEBUG_KMS("connector %s has no encoder or crtc, skipping\n",
 635                                       connector->name);
 636                         enabled[i] = false;
 637                         conn_configured |= BIT(i);
 638                         continue;
 639                 }
 640
 641                 num_connectors_enabled++;
 642
 643                 new_crtc = connector->state->crtc;
 644
 645                 /*
 646                  * Make sure we're not trying to drive multiple connectors
 647                  * with a single CRTC, since our cloning support may not
 648                  * match the BIOS.
 649                  */
 650                 for (j = 0; j < count; j++) {
 651                         if (crtcs[j] == new_crtc) {
 652                                 DRM_DEBUG_KMS("fallback: cloned configuration\n");
 653                                 goto bail;
 654                         }
 655                 }
 656
 657                 DRM_DEBUG_KMS("looking for cmdline mode on connector %s\n",
 658                               connector->name);
 659
 660                 /* go for command line mode first */
 661                 modes[i] = drm_connector_pick_cmdline_mode(connector);
 662
 663                 /* try for preferred next */
 664                 if (!modes[i]) {
 665                         DRM_DEBUG_KMS("looking for preferred mode on connector %s %d\n",
 666                                       connector->name, connector->has_tile);
 667                         modes[i] = drm_connector_has_preferred_mode(connector, width, height);
 668                 }
 669
 670                 /* No preferred mode marked by the EDID? Are there any modes? */
 671                 if (!modes[i] && !list_empty(&connector->modes)) {
 672                         DRM_DEBUG_KMS("using first mode listed on connector %s\n",
 673                                       connector->name);
 674                         modes[i] = list_first_entry(&connector->modes,
 675                                                     struct drm_display_mode,
 676                                                     head);
 677                 }
 678
 679                 /* last resort: use current mode */
 680                 if (!modes[i]) {
 681                         /*
 682                          * IMPORTANT: We want to use the adjusted mode (i.e.
 683                          * after the panel fitter upscaling) as the initial
 684                          * config, not the input mode, which is what crtc->mode
 685                          * usually contains. But since our current
 686                          * code puts a mode derived from the post-pfit timings
 687                          * into crtc->mode this works out correctly.
 688                          *
 689                          * This is crtc->mode and not crtc->state->mode for the
 690                          * fastboot check to work correctly.
 691                          */
 692                         DRM_DEBUG_KMS("looking for current mode on connector %s\n",
 693                                       connector->name);
 694                         modes[i] = &connector->state->crtc->mode;
 695                 }
 696                 /*
 697                  * In case of tiled modes, if all tiles are not present
 698                  * then fallback to a non tiled mode.
 699                  */
 700                 if (connector->has_tile &&
 701                     num_tiled_conns < connector->num_h_tile * connector->num_v_tile) {
 702                         DRM_DEBUG_KMS("Falling back to non tiled mode on Connector %d\n",
 703                                       connector->base.id);
 704                         modes[i] = drm_connector_fallback_non_tiled_mode(connector);
 705                 }
 706                 crtcs[i] = new_crtc;
 707
 708                 DRM_DEBUG_KMS("connector %s on [CRTC:%d:%s]: %dx%d%s\n",
 709                               connector->name,
 710                               connector->state->crtc->base.id,
 711                               connector->state->crtc->name,
 712                               modes[i]->hdisplay, modes[i]->vdisplay,
 713                               modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "");
 714
 715                 fallback = false;
 716                 conn_configured |= BIT(i);
 717         }
 718
 719         if ((conn_configured & mask) != mask && conn_configured != conn_seq)
 720                 goto retry;
 721
 722         /*
 723          * If the BIOS didn't enable everything it could, fall back to have the
 724          * same user experiencing of lighting up as much as possible like the
 725          * fbdev helper library.
 726          */
 727         if (num_connectors_enabled != num_connectors_detected &&
 728             num_connectors_enabled < dev->mode_config.num_crtc) {
 729                 DRM_DEBUG_KMS("fallback: Not all outputs enabled\n");
 730                 DRM_DEBUG_KMS("Enabled: %i, detected: %i\n", num_connectors_enabled,
 731                               num_connectors_detected);
 732                 fallback = true;
 733         }
 734
 735         if (fallback) {
 736 bail:
 737                 DRM_DEBUG_KMS("Not using firmware configuration\n");
 738                 memcpy(enabled, save_enabled, count);
 739                 ret = false;
 740         }
 741
 742         drm_modeset_drop_locks(&ctx);
 743         drm_modeset_acquire_fini(&ctx);
 744
 745         kfree(save_enabled);
 746         return ret;
 747 }
 748
 749 /**
 750  * drm_client_modeset_probe() - Probe for displays
 751  * @client: DRM client
 752  * @width: Maximum display mode width (optional)
 753  * @height: Maximum display mode height (optional)
 754  *
 755  * This function sets up display pipelines for enabled connectors and stores the
 756  * config in the client's modeset array.
 757  *
 758  * Returns:
 759  * Zero on success or negative error code on failure.
 760  */
 761 int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width, unsigned int height)
 762 {
 763         struct drm_connector *connector, **connectors = NULL;
 764         struct drm_connector_list_iter conn_iter;
 765         struct drm_device *dev = client->dev;
 766         unsigned int total_modes_count = 0;
 767         struct drm_client_offset *offsets;
 768         unsigned int connector_count = 0;
 769         struct drm_display_mode **modes;
 770         struct drm_crtc **crtcs;
 771         int i, ret = 0;
 772         bool *enabled;
 773
 774         DRM_DEBUG_KMS("\n");
 775
 776         if (!width)
 777                 width = dev->mode_config.max_width;
 778         if (!height)
 779                 height = dev->mode_config.max_height;
 780
 781         drm_connector_list_iter_begin(dev, &conn_iter);
 782         drm_client_for_each_connector_iter(connector, &conn_iter) {
 783                 struct drm_connector **tmp;
 784
 785                 tmp = krealloc(connectors, (connector_count + 1) * sizeof(*connectors), GFP_KERNEL);
 786                 if (!tmp) {
 787                         ret = -ENOMEM;
 788                         goto free_connectors;
 789                 }
 790
 791                 connectors = tmp;
 792                 drm_connector_get(connector);
 793                 connectors[connector_count++] = connector;
 794         }
 795         drm_connector_list_iter_end(&conn_iter);
 796
 797         if (!connector_count)
 798                 return 0;
 799
 800         crtcs = kcalloc(connector_count, sizeof(*crtcs), GFP_KERNEL);
 801         modes = kcalloc(connector_count, sizeof(*modes), GFP_KERNEL);
 802         offsets = kcalloc(connector_count, sizeof(*offsets), GFP_KERNEL);
 803         enabled = kcalloc(connector_count, sizeof(bool), GFP_KERNEL);
 804         if (!crtcs || !modes || !enabled || !offsets) {
 805                 DRM_ERROR("Memory allocation failed\n");
 806                 ret = -ENOMEM;
 807                 goto out;
 808         }
 809
 810         mutex_lock(&client->modeset_mutex);
 811
 812         mutex_lock(&dev->mode_config.mutex);
 813         for (i = 0; i < connector_count; i++)
 814                 total_modes_count += connectors[i]->funcs->fill_modes(connectors[i], width, height);
 815         if (!total_modes_count)
 816                 DRM_DEBUG_KMS("No connectors reported connected with modes\n");
 817         drm_client_connectors_enabled(connectors, connector_count, enabled);
 818
 819         if (!drm_client_firmware_config(client, connectors, connector_count, crtcs,
 820                                         modes, offsets, enabled, width, height)) {
 821                 memset(modes, 0, connector_count * sizeof(*modes));
 822                 memset(crtcs, 0, connector_count * sizeof(*crtcs));
 823                 memset(offsets, 0, connector_count * sizeof(*offsets));
 824
 825                 if (!drm_client_target_cloned(dev, connectors, connector_count, modes,
 826                                               offsets, enabled, width, height) &&
 827                     !drm_client_target_preferred(connectors, connector_count, modes,
 828                                                  offsets, enabled, width, height))
 829                         DRM_ERROR("Unable to find initial modes\n");
 830
 831                 DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n",
 832                               width, height);
 833
 834                 drm_client_pick_crtcs(client, connectors, connector_count,
 835                                       crtcs, modes, 0, width, height);
 836         }
 837         mutex_unlock(&dev->mode_config.mutex);
 838
 839         drm_client_modeset_release(client);
 840
 841         for (i = 0; i < connector_count; i++) {
 842                 struct drm_display_mode *mode = modes[i];
 843                 struct drm_crtc *crtc = crtcs[i];
 844                 struct drm_client_offset *offset = &offsets[i];
 845
 846                 if (mode && crtc) {
 847                         struct drm_mode_set *modeset = drm_client_find_modeset(client, crtc);
 848                         struct drm_connector *connector = connectors[i];
 849
 850                         DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n",
 851                                       mode->name, crtc->base.id, offset->x, offset->y);
 852
 853                         if (WARN_ON_ONCE(modeset->num_connectors == DRM_CLIENT_MAX_CLONED_CONNECTORS ||
 854                                          (dev->mode_config.num_crtc > 1 && modeset->num_connectors == 1))) {
 855                                 ret = -EINVAL;
 856                                 break;
 857                         }
 858
 859                         modeset->mode = drm_mode_duplicate(dev, mode);
 860                         drm_connector_get(connector);
 861                         modeset->connectors[modeset->num_connectors++] = connector;
 862                         modeset->x = offset->x;
 863                         modeset->y = offset->y;
 864                 }
 865         }
 866
 867         mutex_unlock(&client->modeset_mutex);
 868 out:
 869         kfree(crtcs);
 870         kfree(modes);
 871         kfree(offsets);
 872         kfree(enabled);
 873 free_connectors:
 874         for (i = 0; i < connector_count; i++)
 875                 drm_connector_put(connectors[i]);
 876         kfree(connectors);
 877
 878         return ret;
 879 }
 880 EXPORT_SYMBOL(drm_client_modeset_probe);
 881
 882 /**
 883  * drm_client_rotation() - Check the initial rotation value
 884  * @modeset: DRM modeset
 885  * @rotation: Returned rotation value
 886  *
 887  * This function checks if the primary plane in @modeset can hw rotate
 888  * to match the rotation needed on its connector.
 889  *
 890  * Note: Currently only 0 and 180 degrees are supported.
 891  *
 892  * Return:
 893  * True if the plane can do the rotation, false otherwise.
 894  */
 895 bool drm_client_rotation(struct drm_mode_set *modeset, unsigned int *rotation)
 896 {
 897         struct drm_connector *connector = modeset->connectors[0];
 898         struct drm_plane *plane = modeset->crtc->primary;
 899         struct drm_cmdline_mode *cmdline;
 900         u64 valid_mask = 0;
 901         unsigned int i;
 902
 903         if (!modeset->num_connectors)
 904                 return false;
 905
 906         switch (connector->display_info.panel_orientation) {
 907         case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
 908                 *rotation = DRM_MODE_ROTATE_180;
 909                 break;
 910         case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
 911                 *rotation = DRM_MODE_ROTATE_90;
 912                 break;
 913         case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
 914                 *rotation = DRM_MODE_ROTATE_270;
 915                 break;
 916         default:
 917                 *rotation = DRM_MODE_ROTATE_0;
 918         }
 919
 920         /**
 921          * The panel already defined the default rotation
 922          * through its orientation. Whatever has been provided
 923          * on the command line needs to be added to that.
 924          *
 925          * Unfortunately, the rotations are at different bit
 926          * indices, so the math to add them up are not as
 927          * trivial as they could.
 928          *
 929          * Reflections on the other hand are pretty trivial to deal with, a
 930          * simple XOR between the two handle the addition nicely.
 931          */
 932         cmdline = &connector->cmdline_mode;
 933         if (cmdline->specified && cmdline->rotation_reflection) {
 934                 unsigned int cmdline_rest, panel_rest;
 935                 unsigned int cmdline_rot, panel_rot;
 936                 unsigned int sum_rot, sum_rest;
 937
 938                 panel_rot = ilog2(*rotation & DRM_MODE_ROTATE_MASK);
 939                 cmdline_rot = ilog2(cmdline->rotation_reflection & DRM_MODE_ROTATE_MASK);
 940                 sum_rot = (panel_rot + cmdline_rot) % 4;
 941
 942                 panel_rest = *rotation & ~DRM_MODE_ROTATE_MASK;
 943                 cmdline_rest = cmdline->rotation_reflection & ~DRM_MODE_ROTATE_MASK;
 944                 sum_rest = panel_rest ^ cmdline_rest;
 945
 946                 *rotation = (1 << sum_rot) | sum_rest;
 947         }
 948
 949         /*
 950          * TODO: support 90 / 270 degree hardware rotation,
 951          * depending on the hardware this may require the framebuffer
 952          * to be in a specific tiling format.
 953          */
 954         if ((*rotation & DRM_MODE_ROTATE_MASK) != DRM_MODE_ROTATE_180 ||
 955             !plane->rotation_property)
 956                 return false;
 957
 958         for (i = 0; i < plane->rotation_property->num_values; i++)
 959                 valid_mask |= (1ULL << plane->rotation_property->values[i]);
 960
 961         if (!(*rotation & valid_mask))
 962                 return false;
 963
 964         return true;
 965 }
 966 EXPORT_SYMBOL(drm_client_rotation);
 967
 968 static int drm_client_modeset_commit_atomic(struct drm_client_dev *client, bool active)
 969 {
 970         struct drm_device *dev = client->dev;
 971         struct drm_plane *plane;
 972         struct drm_atomic_state *state;
 973         struct drm_modeset_acquire_ctx ctx;
 974         struct drm_mode_set *mode_set;
 975         int ret;
 976
 977         drm_modeset_acquire_init(&ctx, 0);
 978
 979         state = drm_atomic_state_alloc(dev);
 980         if (!state) {
 981                 ret = -ENOMEM;
 982                 goto out_ctx;
 983         }
 984
 985         state->acquire_ctx = &ctx;
 986 retry:
 987         drm_for_each_plane(plane, dev) {
 988                 struct drm_plane_state *plane_state;
 989
 990                 plane_state = drm_atomic_get_plane_state(state, plane);
 991                 if (IS_ERR(plane_state)) {
 992                         ret = PTR_ERR(plane_state);
 993                         goto out_state;
 994                 }
 995
 996                 plane_state->rotation = DRM_MODE_ROTATE_0;
 997
 998                 /* disable non-primary: */
 999                 if (plane->type == DRM_PLANE_TYPE_PRIMARY)
1000                         continue;
1001
1002                 ret = __drm_atomic_helper_disable_plane(plane, plane_state);
1003                 if (ret != 0)
1004                         goto out_state;
1005         }
1006
1007         drm_client_for_each_modeset(mode_set, client) {
1008                 struct drm_plane *primary = mode_set->crtc->primary;
1009                 unsigned int rotation;
1010
1011                 if (drm_client_rotation(mode_set, &rotation)) {
1012                         struct drm_plane_state *plane_state;
1013
1014                         /* Cannot fail as we've already gotten the plane state above */
1015                         plane_state = drm_atomic_get_new_plane_state(state, primary);
1016                         plane_state->rotation = rotation;
1017                 }
1018
1019                 ret = __drm_atomic_helper_set_config(mode_set, state);
1020                 if (ret != 0)
1021                         goto out_state;
1022
1023                 /*
1024                  * __drm_atomic_helper_set_config() sets active when a
1025                  * mode is set, unconditionally clear it if we force DPMS off
1026                  */
1027                 if (!active) {
1028                         struct drm_crtc *crtc = mode_set->crtc;
1029                         struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
1030
1031                         crtc_state->active = false;
1032                 }
1033         }
1034
1035         ret = drm_atomic_commit(state);
1036
1037 out_state:
1038         if (ret == -EDEADLK)
1039                 goto backoff;
1040
1041         drm_atomic_state_put(state);
1042 out_ctx:
1043         drm_modeset_drop_locks(&ctx);
1044         drm_modeset_acquire_fini(&ctx);
1045
1046         return ret;
1047
1048 backoff:
1049         drm_atomic_state_clear(state);
1050         drm_modeset_backoff(&ctx);
1051
1052         goto retry;
1053 }
1054
1055 static int drm_client_modeset_commit_legacy(struct drm_client_dev *client)
1056 {
1057         struct drm_device *dev = client->dev;
1058         struct drm_mode_set *mode_set;
1059         struct drm_plane *plane;
1060         int ret = 0;
1061
1062         drm_modeset_lock_all(dev);
1063         drm_for_each_plane(plane, dev) {
1064                 if (plane->type != DRM_PLANE_TYPE_PRIMARY)
1065                         drm_plane_force_disable(plane);
1066
1067                 if (plane->rotation_property)
1068                         drm_mode_plane_set_obj_prop(plane,
1069                                                     plane->rotation_property,
1070                                                     DRM_MODE_ROTATE_0);
1071         }
1072
1073         drm_client_for_each_modeset(mode_set, client) {
1074                 struct drm_crtc *crtc = mode_set->crtc;
1075
1076                 if (crtc->funcs->cursor_set2) {
1077                         ret = crtc->funcs->cursor_set2(crtc, NULL, 0, 0, 0, 0, 0);
1078                         if (ret)
1079                                 goto out;
1080                 } else if (crtc->funcs->cursor_set) {
1081                         ret = crtc->funcs->cursor_set(crtc, NULL, 0, 0, 0);
1082                         if (ret)
1083                                 goto out;
1084                 }
1085
1086                 ret = drm_mode_set_config_internal(mode_set);
1087                 if (ret)
1088                         goto out;
1089         }
1090 out:
1091         drm_modeset_unlock_all(dev);
1092
1093         return ret;
1094 }
1095
1096 /**
1097  * drm_client_modeset_commit_force() - Force commit CRTC configuration
1098  * @client: DRM client
1099  *
1100  * Commit modeset configuration to crtcs without checking if there is a DRM master.
1101  *
1102  * Returns:
1103  * Zero on success or negative error code on failure.
1104  */
1105 int drm_client_modeset_commit_force(struct drm_client_dev *client)
1106 {
1107         struct drm_device *dev = client->dev;
1108         int ret;
1109
1110         mutex_lock(&client->modeset_mutex);
1111         if (drm_drv_uses_atomic_modeset(dev))
1112                 ret = drm_client_modeset_commit_atomic(client, true);
1113         else
1114                 ret = drm_client_modeset_commit_legacy(client);
1115         mutex_unlock(&client->modeset_mutex);
1116
1117         return ret;
1118 }
1119 EXPORT_SYMBOL(drm_client_modeset_commit_force);
1120
1121 /**
1122  * drm_client_modeset_commit() - Commit CRTC configuration
1123  * @client: DRM client
1124  *
1125  * Commit modeset configuration to crtcs.
1126  *
1127  * Returns:
1128  * Zero on success or negative error code on failure.
1129  */
1130 int drm_client_modeset_commit(struct drm_client_dev *client)
1131 {
1132         struct drm_device *dev = client->dev;
1133         int ret;
1134
1135         if (!drm_master_internal_acquire(dev))
1136                 return -EBUSY;
1137
1138         ret = drm_client_modeset_commit_force(client);
1139
1140         drm_master_internal_release(dev);
1141
1142         return ret;
1143 }
1144 EXPORT_SYMBOL(drm_client_modeset_commit);
1145
1146 static void drm_client_modeset_dpms_legacy(struct drm_client_dev *client, int dpms_mode)
1147 {
1148         struct drm_device *dev = client->dev;
1149         struct drm_connector *connector;
1150         struct drm_mode_set *modeset;
1151         int j;
1152
1153         drm_modeset_lock_all(dev);
1154         drm_client_for_each_modeset(modeset, client) {
1155                 if (!modeset->crtc->enabled)
1156                         continue;
1157
1158                 for (j = 0; j < modeset->num_connectors; j++) {
1159                         connector = modeset->connectors[j];
1160                         connector->funcs->dpms(connector, dpms_mode);
1161                         drm_object_property_set_value(&connector->base,
1162                                 dev->mode_config.dpms_property, dpms_mode);
1163                 }
1164         }
1165         drm_modeset_unlock_all(dev);
1166 }
1167
1168 /**
1169  * drm_client_modeset_dpms() - Set DPMS mode
1170  * @client: DRM client
1171  * @mode: DPMS mode
1172  *
1173  * Note: For atomic drivers @mode is reduced to on/off.
1174  *
1175  * Returns:
1176  * Zero on success or negative error code on failure.
1177  */
1178 int drm_client_modeset_dpms(struct drm_client_dev *client, int mode)
1179 {
1180         struct drm_device *dev = client->dev;
1181         int ret = 0;
1182
1183         if (!drm_master_internal_acquire(dev))
1184                 return -EBUSY;
1185
1186         mutex_lock(&client->modeset_mutex);
1187         if (drm_drv_uses_atomic_modeset(dev))
1188                 ret = drm_client_modeset_commit_atomic(client, mode == DRM_MODE_DPMS_ON);
1189         else
1190                 drm_client_modeset_dpms_legacy(client, mode);
1191         mutex_unlock(&client->modeset_mutex);
1192
1193         drm_master_internal_release(dev);
1194
1195         return ret;
1196 }
1197 EXPORT_SYMBOL(drm_client_modeset_dpms);