Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
[linux-2.6-microblaze.git] / drivers / gpu / drm / bridge / ti-tfp410.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2016 Texas Instruments
4  * Author: Jyri Sarha <jsarha@ti.com>
5  */
6
7 #include <linux/gpio/consumer.h>
8 #include <linux/i2c.h>
9 #include <linux/module.h>
10 #include <linux/of_graph.h>
11 #include <linux/platform_device.h>
12 #include <linux/workqueue.h>
13
14 #include <drm/drm_atomic_helper.h>
15 #include <drm/drm_bridge.h>
16 #include <drm/drm_crtc.h>
17 #include <drm/drm_print.h>
18 #include <drm/drm_probe_helper.h>
19
20 #define HOTPLUG_DEBOUNCE_MS             1100
21
22 struct tfp410 {
23         struct drm_bridge       bridge;
24         struct drm_connector    connector;
25
26         u32                     bus_format;
27         struct delayed_work     hpd_work;
28         struct gpio_desc        *powerdown;
29
30         struct drm_bridge_timings timings;
31         struct drm_bridge       *next_bridge;
32
33         struct device *dev;
34 };
35
36 static inline struct tfp410 *
37 drm_bridge_to_tfp410(struct drm_bridge *bridge)
38 {
39         return container_of(bridge, struct tfp410, bridge);
40 }
41
42 static inline struct tfp410 *
43 drm_connector_to_tfp410(struct drm_connector *connector)
44 {
45         return container_of(connector, struct tfp410, connector);
46 }
47
48 static int tfp410_get_modes(struct drm_connector *connector)
49 {
50         struct tfp410 *dvi = drm_connector_to_tfp410(connector);
51         struct edid *edid;
52         int ret;
53
54         if (dvi->next_bridge->ops & DRM_BRIDGE_OP_EDID) {
55                 edid = drm_bridge_get_edid(dvi->next_bridge, connector);
56                 if (!edid)
57                         DRM_INFO("EDID read failed. Fallback to standard modes\n");
58         } else {
59                 edid = NULL;
60         }
61
62         if (!edid) {
63                 /*
64                  * No EDID, fallback on the XGA standard modes and prefer a mode
65                  * pretty much anything can handle.
66                  */
67                 ret = drm_add_modes_noedid(connector, 1920, 1200);
68                 drm_set_preferred_mode(connector, 1024, 768);
69                 return ret;
70         }
71
72         drm_connector_update_edid_property(connector, edid);
73
74         ret = drm_add_edid_modes(connector, edid);
75
76         kfree(edid);
77
78         return ret;
79 }
80
81 static const struct drm_connector_helper_funcs tfp410_con_helper_funcs = {
82         .get_modes      = tfp410_get_modes,
83 };
84
85 static enum drm_connector_status
86 tfp410_connector_detect(struct drm_connector *connector, bool force)
87 {
88         struct tfp410 *dvi = drm_connector_to_tfp410(connector);
89
90         return drm_bridge_detect(dvi->next_bridge);
91 }
92
93 static const struct drm_connector_funcs tfp410_con_funcs = {
94         .detect                 = tfp410_connector_detect,
95         .fill_modes             = drm_helper_probe_single_connector_modes,
96         .destroy                = drm_connector_cleanup,
97         .reset                  = drm_atomic_helper_connector_reset,
98         .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
99         .atomic_destroy_state   = drm_atomic_helper_connector_destroy_state,
100 };
101
102 static void tfp410_hpd_work_func(struct work_struct *work)
103 {
104         struct tfp410 *dvi;
105
106         dvi = container_of(work, struct tfp410, hpd_work.work);
107
108         if (dvi->bridge.dev)
109                 drm_helper_hpd_irq_event(dvi->bridge.dev);
110 }
111
112 static void tfp410_hpd_callback(void *arg, enum drm_connector_status status)
113 {
114         struct tfp410 *dvi = arg;
115
116         mod_delayed_work(system_wq, &dvi->hpd_work,
117                          msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
118 }
119
120 static int tfp410_attach(struct drm_bridge *bridge,
121                          enum drm_bridge_attach_flags flags)
122 {
123         struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
124         int ret;
125
126         ret = drm_bridge_attach(bridge->encoder, dvi->next_bridge, bridge,
127                                 DRM_BRIDGE_ATTACH_NO_CONNECTOR);
128         if (ret < 0)
129                 return ret;
130
131         if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
132                 return 0;
133
134         if (!bridge->encoder) {
135                 dev_err(dvi->dev, "Missing encoder\n");
136                 return -ENODEV;
137         }
138
139         if (dvi->next_bridge->ops & DRM_BRIDGE_OP_DETECT)
140                 dvi->connector.polled = DRM_CONNECTOR_POLL_HPD;
141         else
142                 dvi->connector.polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
143
144         if (dvi->next_bridge->ops & DRM_BRIDGE_OP_HPD) {
145                 INIT_DELAYED_WORK(&dvi->hpd_work, tfp410_hpd_work_func);
146                 drm_bridge_hpd_enable(dvi->next_bridge, tfp410_hpd_callback,
147                                       dvi);
148         }
149
150         drm_connector_helper_add(&dvi->connector,
151                                  &tfp410_con_helper_funcs);
152         ret = drm_connector_init_with_ddc(bridge->dev, &dvi->connector,
153                                           &tfp410_con_funcs,
154                                           dvi->next_bridge->type,
155                                           dvi->next_bridge->ddc);
156         if (ret) {
157                 dev_err(dvi->dev, "drm_connector_init_with_ddc() failed: %d\n",
158                         ret);
159                 return ret;
160         }
161
162         drm_display_info_set_bus_formats(&dvi->connector.display_info,
163                                          &dvi->bus_format, 1);
164
165         drm_connector_attach_encoder(&dvi->connector, bridge->encoder);
166
167         return 0;
168 }
169
170 static void tfp410_detach(struct drm_bridge *bridge)
171 {
172         struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
173
174         if (dvi->connector.dev && dvi->next_bridge->ops & DRM_BRIDGE_OP_HPD) {
175                 drm_bridge_hpd_disable(dvi->next_bridge);
176                 cancel_delayed_work_sync(&dvi->hpd_work);
177         }
178 }
179
180 static void tfp410_enable(struct drm_bridge *bridge)
181 {
182         struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
183
184         gpiod_set_value_cansleep(dvi->powerdown, 0);
185 }
186
187 static void tfp410_disable(struct drm_bridge *bridge)
188 {
189         struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
190
191         gpiod_set_value_cansleep(dvi->powerdown, 1);
192 }
193
194 static enum drm_mode_status tfp410_mode_valid(struct drm_bridge *bridge,
195                                               const struct drm_display_info *info,
196                                               const struct drm_display_mode *mode)
197 {
198         if (mode->clock < 25000)
199                 return MODE_CLOCK_LOW;
200
201         if (mode->clock > 165000)
202                 return MODE_CLOCK_HIGH;
203
204         return MODE_OK;
205 }
206
207 static const struct drm_bridge_funcs tfp410_bridge_funcs = {
208         .attach         = tfp410_attach,
209         .detach         = tfp410_detach,
210         .enable         = tfp410_enable,
211         .disable        = tfp410_disable,
212         .mode_valid     = tfp410_mode_valid,
213 };
214
215 static const struct drm_bridge_timings tfp410_default_timings = {
216         .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
217                          | DRM_BUS_FLAG_DE_HIGH,
218         .setup_time_ps = 1200,
219         .hold_time_ps = 1300,
220 };
221
222 static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
223 {
224         struct drm_bridge_timings *timings = &dvi->timings;
225         struct device_node *ep;
226         u32 pclk_sample = 0;
227         u32 bus_width = 24;
228         u32 deskew = 0;
229
230         /* Start with defaults. */
231         *timings = tfp410_default_timings;
232
233         if (i2c)
234                 /*
235                  * In I2C mode timings are configured through the I2C interface.
236                  * As the driver doesn't support I2C configuration yet, we just
237                  * go with the defaults (BSEL=1, DSEL=1, DKEN=0, EDGE=1).
238                  */
239                 return 0;
240
241         /*
242          * In non-I2C mode, timings are configured through the BSEL, DSEL, DKEN
243          * and EDGE pins. They are specified in DT through endpoint properties
244          * and vendor-specific properties.
245          */
246         ep = of_graph_get_endpoint_by_regs(dvi->dev->of_node, 0, 0);
247         if (!ep)
248                 return -EINVAL;
249
250         /* Get the sampling edge from the endpoint. */
251         of_property_read_u32(ep, "pclk-sample", &pclk_sample);
252         of_property_read_u32(ep, "bus-width", &bus_width);
253         of_node_put(ep);
254
255         timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;
256
257         switch (pclk_sample) {
258         case 0:
259                 timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
260                                          |  DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;
261                 break;
262         case 1:
263                 timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
264                                          |  DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE;
265                 break;
266         default:
267                 return -EINVAL;
268         }
269
270         switch (bus_width) {
271         case 12:
272                 dvi->bus_format = MEDIA_BUS_FMT_RGB888_2X12_LE;
273                 break;
274         case 24:
275                 dvi->bus_format = MEDIA_BUS_FMT_RGB888_1X24;
276                 break;
277         default:
278                 return -EINVAL;
279         }
280
281         /* Get the setup and hold time from vendor-specific properties. */
282         of_property_read_u32(dvi->dev->of_node, "ti,deskew", &deskew);
283         if (deskew > 7)
284                 return -EINVAL;
285
286         timings->setup_time_ps = 1200 - 350 * ((s32)deskew - 4);
287         timings->hold_time_ps = max(0, 1300 + 350 * ((s32)deskew - 4));
288
289         return 0;
290 }
291
292 static int tfp410_init(struct device *dev, bool i2c)
293 {
294         struct device_node *node;
295         struct tfp410 *dvi;
296         int ret;
297
298         if (!dev->of_node) {
299                 dev_err(dev, "device-tree data is missing\n");
300                 return -ENXIO;
301         }
302
303         dvi = devm_kzalloc(dev, sizeof(*dvi), GFP_KERNEL);
304         if (!dvi)
305                 return -ENOMEM;
306
307         dvi->dev = dev;
308         dev_set_drvdata(dev, dvi);
309
310         dvi->bridge.funcs = &tfp410_bridge_funcs;
311         dvi->bridge.of_node = dev->of_node;
312         dvi->bridge.timings = &dvi->timings;
313         dvi->bridge.type = DRM_MODE_CONNECTOR_DVID;
314
315         ret = tfp410_parse_timings(dvi, i2c);
316         if (ret)
317                 return ret;
318
319         /* Get the next bridge, connected to port@1. */
320         node = of_graph_get_remote_node(dev->of_node, 1, -1);
321         if (!node)
322                 return -ENODEV;
323
324         dvi->next_bridge = of_drm_find_bridge(node);
325         of_node_put(node);
326
327         if (!dvi->next_bridge)
328                 return -EPROBE_DEFER;
329
330         /* Get the powerdown GPIO. */
331         dvi->powerdown = devm_gpiod_get_optional(dev, "powerdown",
332                                                  GPIOD_OUT_HIGH);
333         if (IS_ERR(dvi->powerdown)) {
334                 dev_err(dev, "failed to parse powerdown gpio\n");
335                 return PTR_ERR(dvi->powerdown);
336         }
337
338         /*  Register the DRM bridge. */
339         drm_bridge_add(&dvi->bridge);
340
341         return 0;
342 }
343
344 static int tfp410_fini(struct device *dev)
345 {
346         struct tfp410 *dvi = dev_get_drvdata(dev);
347
348         drm_bridge_remove(&dvi->bridge);
349
350         return 0;
351 }
352
353 static int tfp410_probe(struct platform_device *pdev)
354 {
355         return tfp410_init(&pdev->dev, false);
356 }
357
358 static int tfp410_remove(struct platform_device *pdev)
359 {
360         return tfp410_fini(&pdev->dev);
361 }
362
363 static const struct of_device_id tfp410_match[] = {
364         { .compatible = "ti,tfp410" },
365         {},
366 };
367 MODULE_DEVICE_TABLE(of, tfp410_match);
368
369 static struct platform_driver tfp410_platform_driver = {
370         .probe  = tfp410_probe,
371         .remove = tfp410_remove,
372         .driver = {
373                 .name           = "tfp410-bridge",
374                 .of_match_table = tfp410_match,
375         },
376 };
377
378 #if IS_ENABLED(CONFIG_I2C)
379 /* There is currently no i2c functionality. */
380 static int tfp410_i2c_probe(struct i2c_client *client,
381                             const struct i2c_device_id *id)
382 {
383         int reg;
384
385         if (!client->dev.of_node ||
386             of_property_read_u32(client->dev.of_node, "reg", &reg)) {
387                 dev_err(&client->dev,
388                         "Can't get i2c reg property from device-tree\n");
389                 return -ENXIO;
390         }
391
392         return tfp410_init(&client->dev, true);
393 }
394
395 static int tfp410_i2c_remove(struct i2c_client *client)
396 {
397         return tfp410_fini(&client->dev);
398 }
399
400 static const struct i2c_device_id tfp410_i2c_ids[] = {
401         { "tfp410", 0 },
402         { }
403 };
404 MODULE_DEVICE_TABLE(i2c, tfp410_i2c_ids);
405
406 static struct i2c_driver tfp410_i2c_driver = {
407         .driver = {
408                 .name   = "tfp410",
409                 .of_match_table = of_match_ptr(tfp410_match),
410         },
411         .id_table       = tfp410_i2c_ids,
412         .probe          = tfp410_i2c_probe,
413         .remove         = tfp410_i2c_remove,
414 };
415 #endif /* IS_ENABLED(CONFIG_I2C) */
416
417 static struct {
418         uint i2c:1;
419         uint platform:1;
420 }  tfp410_registered_driver;
421
422 static int __init tfp410_module_init(void)
423 {
424         int ret;
425
426 #if IS_ENABLED(CONFIG_I2C)
427         ret = i2c_add_driver(&tfp410_i2c_driver);
428         if (ret)
429                 pr_err("%s: registering i2c driver failed: %d",
430                        __func__, ret);
431         else
432                 tfp410_registered_driver.i2c = 1;
433 #endif
434
435         ret = platform_driver_register(&tfp410_platform_driver);
436         if (ret)
437                 pr_err("%s: registering platform driver failed: %d",
438                        __func__, ret);
439         else
440                 tfp410_registered_driver.platform = 1;
441
442         if (tfp410_registered_driver.i2c ||
443             tfp410_registered_driver.platform)
444                 return 0;
445
446         return ret;
447 }
448 module_init(tfp410_module_init);
449
450 static void __exit tfp410_module_exit(void)
451 {
452 #if IS_ENABLED(CONFIG_I2C)
453         if (tfp410_registered_driver.i2c)
454                 i2c_del_driver(&tfp410_i2c_driver);
455 #endif
456         if (tfp410_registered_driver.platform)
457                 platform_driver_unregister(&tfp410_platform_driver);
458 }
459 module_exit(tfp410_module_exit);
460
461 MODULE_AUTHOR("Jyri Sarha <jsarha@ti.com>");
462 MODULE_DESCRIPTION("TI TFP410 DVI bridge driver");
463 MODULE_LICENSE("GPL");