d734d9402c350fff9bf85a074201ed95e34cd0c1
[linux-2.6-microblaze.git] / drivers / gpu / drm / bridge / lontium-lt9611.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
4  * Copyright (c) 2019-2020. Linaro Limited.
5  */
6
7 #include <linux/gpio/consumer.h>
8 #include <linux/interrupt.h>
9 #include <linux/module.h>
10 #include <linux/of_graph.h>
11 #include <linux/platform_device.h>
12 #include <linux/regmap.h>
13 #include <linux/regulator/consumer.h>
14
15 #include <sound/hdmi-codec.h>
16
17 #include <drm/drm_atomic_helper.h>
18 #include <drm/drm_bridge.h>
19 #include <drm/drm_mipi_dsi.h>
20 #include <drm/drm_print.h>
21 #include <drm/drm_probe_helper.h>
22
23 #define EDID_SEG_SIZE   256
24 #define EDID_LEN        32
25 #define EDID_LOOP       8
26 #define KEY_DDC_ACCS_DONE 0x02
27 #define DDC_NO_ACK      0x50
28
29 #define LT9611_4LANES   0
30
31 struct lt9611 {
32         struct device *dev;
33         struct drm_bridge bridge;
34         struct drm_connector connector;
35
36         struct regmap *regmap;
37
38         struct device_node *dsi0_node;
39         struct device_node *dsi1_node;
40         struct mipi_dsi_device *dsi0;
41         struct mipi_dsi_device *dsi1;
42         struct platform_device *audio_pdev;
43
44         bool ac_mode;
45
46         struct gpio_desc *reset_gpio;
47         struct gpio_desc *enable_gpio;
48
49         bool power_on;
50         bool sleep;
51
52         struct regulator_bulk_data supplies[2];
53
54         struct i2c_client *client;
55
56         enum drm_connector_status status;
57
58         u8 edid_buf[EDID_SEG_SIZE];
59         u32 vic;
60 };
61
62 #define LT9611_PAGE_CONTROL     0xff
63
64 static const struct regmap_range_cfg lt9611_ranges[] = {
65         {
66                 .name = "register_range",
67                 .range_min =  0,
68                 .range_max = 0x85ff,
69                 .selector_reg = LT9611_PAGE_CONTROL,
70                 .selector_mask = 0xff,
71                 .selector_shift = 0,
72                 .window_start = 0,
73                 .window_len = 0x100,
74         },
75 };
76
77 static const struct regmap_config lt9611_regmap_config = {
78         .reg_bits = 8,
79         .val_bits = 8,
80         .max_register = 0xffff,
81         .ranges = lt9611_ranges,
82         .num_ranges = ARRAY_SIZE(lt9611_ranges),
83 };
84
85 struct lt9611_mode {
86         u16 hdisplay;
87         u16 vdisplay;
88         u8 vrefresh;
89         u8 lanes;
90         u8 intfs;
91 };
92
93 static struct lt9611_mode lt9611_modes[] = {
94         { 3840, 2160, 30, 4, 2 }, /* 3840x2160 24bit 30Hz 4Lane 2ports */
95         { 1920, 1080, 60, 4, 1 }, /* 1080P 24bit 60Hz 4lane 1port */
96         { 1920, 1080, 30, 3, 1 }, /* 1080P 24bit 30Hz 3lane 1port */
97         { 1920, 1080, 24, 3, 1 },
98         { 720, 480, 60, 4, 1 },
99         { 720, 576, 50, 2, 1 },
100         { 640, 480, 60, 2, 1 },
101 };
102
103 static struct lt9611 *bridge_to_lt9611(struct drm_bridge *bridge)
104 {
105         return container_of(bridge, struct lt9611, bridge);
106 }
107
108 static struct lt9611 *connector_to_lt9611(struct drm_connector *connector)
109 {
110         return container_of(connector, struct lt9611, connector);
111 }
112
113 static int lt9611_mipi_input_analog(struct lt9611 *lt9611)
114 {
115         const struct reg_sequence reg_cfg[] = {
116                 { 0x8106, 0x40 }, /* port A rx current */
117                 { 0x810a, 0xfe }, /* port A ldo voltage set */
118                 { 0x810b, 0xbf }, /* enable port A lprx */
119                 { 0x8111, 0x40 }, /* port B rx current */
120                 { 0x8115, 0xfe }, /* port B ldo voltage set */
121                 { 0x8116, 0xbf }, /* enable port B lprx */
122
123                 { 0x811c, 0x03 }, /* PortA clk lane no-LP mode */
124                 { 0x8120, 0x03 }, /* PortB clk lane with-LP mode */
125         };
126
127         return regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg));
128 }
129
130 static int lt9611_mipi_input_digital(struct lt9611 *lt9611,
131                                      const struct drm_display_mode *mode)
132 {
133         struct reg_sequence reg_cfg[] = {
134                 { 0x8300, LT9611_4LANES },
135                 { 0x830a, 0x00 },
136                 { 0x824f, 0x80 },
137                 { 0x8250, 0x10 },
138                 { 0x8302, 0x0a },
139                 { 0x8306, 0x0a },
140         };
141
142         if (mode->hdisplay == 3840)
143                 reg_cfg[1].def = 0x03;
144
145         return regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg));
146 }
147
148 static void lt9611_mipi_video_setup(struct lt9611 *lt9611,
149                                     const struct drm_display_mode *mode)
150 {
151         u32 h_total, hactive, hsync_len, hfront_porch, hsync_porch;
152         u32 v_total, vactive, vsync_len, vfront_porch, vsync_porch;
153
154         h_total = mode->htotal;
155         v_total = mode->vtotal;
156
157         hactive = mode->hdisplay;
158         hsync_len = mode->hsync_end - mode->hsync_start;
159         hfront_porch = mode->hsync_start - mode->hdisplay;
160         hsync_porch = hsync_len + mode->htotal - mode->hsync_end;
161
162         vactive = mode->vdisplay;
163         vsync_len = mode->vsync_end - mode->vsync_start;
164         vfront_porch = mode->vsync_start - mode->vdisplay;
165         vsync_porch = vsync_len + mode->vtotal - mode->vsync_end;
166
167         regmap_write(lt9611->regmap, 0x830d, (u8)(v_total / 256));
168         regmap_write(lt9611->regmap, 0x830e, (u8)(v_total % 256));
169
170         regmap_write(lt9611->regmap, 0x830f, (u8)(vactive / 256));
171         regmap_write(lt9611->regmap, 0x8310, (u8)(vactive % 256));
172
173         regmap_write(lt9611->regmap, 0x8311, (u8)(h_total / 256));
174         regmap_write(lt9611->regmap, 0x8312, (u8)(h_total % 256));
175
176         regmap_write(lt9611->regmap, 0x8313, (u8)(hactive / 256));
177         regmap_write(lt9611->regmap, 0x8314, (u8)(hactive % 256));
178
179         regmap_write(lt9611->regmap, 0x8315, (u8)(vsync_len % 256));
180         regmap_write(lt9611->regmap, 0x8316, (u8)(hsync_len % 256));
181
182         regmap_write(lt9611->regmap, 0x8317, (u8)(vfront_porch % 256));
183
184         regmap_write(lt9611->regmap, 0x8318, (u8)(vsync_porch % 256));
185
186         regmap_write(lt9611->regmap, 0x8319, (u8)(hfront_porch % 256));
187
188         regmap_write(lt9611->regmap, 0x831a, (u8)(hsync_porch / 256));
189         regmap_write(lt9611->regmap, 0x831b, (u8)(hsync_porch % 256));
190 }
191
192 static void lt9611_pcr_setup(struct lt9611 *lt9611, const struct drm_display_mode *mode)
193 {
194         const struct reg_sequence reg_cfg[] = {
195                 { 0x830b, 0x01 },
196                 { 0x830c, 0x10 },
197                 { 0x8348, 0x00 },
198                 { 0x8349, 0x81 },
199
200                 /* stage 1 */
201                 { 0x8321, 0x4a },
202                 { 0x8324, 0x71 },
203                 { 0x8325, 0x30 },
204                 { 0x832a, 0x01 },
205
206                 /* stage 2 */
207                 { 0x834a, 0x40 },
208                 { 0x831d, 0x10 },
209
210                 /* MK limit */
211                 { 0x832d, 0x38 },
212                 { 0x8331, 0x08 },
213         };
214         const struct reg_sequence reg_cfg2[] = {
215                 { 0x830b, 0x03 },
216                 { 0x830c, 0xd0 },
217                 { 0x8348, 0x03 },
218                 { 0x8349, 0xe0 },
219                 { 0x8324, 0x72 },
220                 { 0x8325, 0x00 },
221                 { 0x832a, 0x01 },
222                 { 0x834a, 0x10 },
223                 { 0x831d, 0x10 },
224                 { 0x8326, 0x37 },
225         };
226
227         regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg));
228
229         switch (mode->hdisplay) {
230         case 640:
231                 regmap_write(lt9611->regmap, 0x8326, 0x14);
232                 break;
233         case 1920:
234                 regmap_write(lt9611->regmap, 0x8326, 0x37);
235                 break;
236         case 3840:
237                 regmap_multi_reg_write(lt9611->regmap, reg_cfg2, ARRAY_SIZE(reg_cfg2));
238                 break;
239         }
240
241         /* pcr rst */
242         regmap_write(lt9611->regmap, 0x8011, 0x5a);
243         regmap_write(lt9611->regmap, 0x8011, 0xfa);
244 }
245
246 static int lt9611_pll_setup(struct lt9611 *lt9611, const struct drm_display_mode *mode)
247 {
248         unsigned int pclk = mode->clock;
249         const struct reg_sequence reg_cfg[] = {
250                 /* txpll init */
251                 { 0x8123, 0x40 },
252                 { 0x8124, 0x64 },
253                 { 0x8125, 0x80 },
254                 { 0x8126, 0x55 },
255                 { 0x812c, 0x37 },
256                 { 0x812f, 0x01 },
257                 { 0x8126, 0x55 },
258                 { 0x8127, 0x66 },
259                 { 0x8128, 0x88 },
260         };
261
262         regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg));
263
264         if (pclk > 150000)
265                 regmap_write(lt9611->regmap, 0x812d, 0x88);
266         else if (pclk > 70000)
267                 regmap_write(lt9611->regmap, 0x812d, 0x99);
268         else
269                 regmap_write(lt9611->regmap, 0x812d, 0xaa);
270
271         /*
272          * first divide pclk by 2 first
273          *  - write divide by 64k to 19:16 bits which means shift by 17
274          *  - write divide by 256 to 15:8 bits which means shift by 9
275          *  - write remainder to 7:0 bits, which means shift by 1
276          */
277         regmap_write(lt9611->regmap, 0x82e3, pclk >> 17); /* pclk[19:16] */
278         regmap_write(lt9611->regmap, 0x82e4, pclk >> 9);  /* pclk[15:8]  */
279         regmap_write(lt9611->regmap, 0x82e5, pclk >> 1);  /* pclk[7:0]   */
280
281         regmap_write(lt9611->regmap, 0x82de, 0x20);
282         regmap_write(lt9611->regmap, 0x82de, 0xe0);
283
284         regmap_write(lt9611->regmap, 0x8016, 0xf1);
285         regmap_write(lt9611->regmap, 0x8016, 0xf3);
286
287         return 0;
288 }
289
290 static int lt9611_read_video_check(struct lt9611 *lt9611, unsigned int reg)
291 {
292         unsigned int temp, temp2;
293         int ret;
294
295         ret = regmap_read(lt9611->regmap, reg, &temp);
296         if (ret)
297                 return ret;
298         temp <<= 8;
299         ret = regmap_read(lt9611->regmap, reg + 1, &temp2);
300         if (ret)
301                 return ret;
302
303         return (temp + temp2);
304 }
305
306 static int lt9611_video_check(struct lt9611 *lt9611)
307 {
308         u32 v_total, vactive, hactive_a, hactive_b, h_total_sysclk;
309         int temp;
310
311         /* top module video check */
312
313         /* vactive */
314         temp = lt9611_read_video_check(lt9611, 0x8282);
315         if (temp < 0)
316                 goto end;
317         vactive = temp;
318
319         /* v_total */
320         temp = lt9611_read_video_check(lt9611, 0x826c);
321         if (temp < 0)
322                 goto end;
323         v_total = temp;
324
325         /* h_total_sysclk */
326         temp = lt9611_read_video_check(lt9611, 0x8286);
327         if (temp < 0)
328                 goto end;
329         h_total_sysclk = temp;
330
331         /* hactive_a */
332         temp = lt9611_read_video_check(lt9611, 0x8382);
333         if (temp < 0)
334                 goto end;
335         hactive_a = temp / 3;
336
337         /* hactive_b */
338         temp = lt9611_read_video_check(lt9611, 0x8386);
339         if (temp < 0)
340                 goto end;
341         hactive_b = temp / 3;
342
343         dev_info(lt9611->dev,
344                  "video check: hactive_a=%d, hactive_b=%d, vactive=%d, v_total=%d, h_total_sysclk=%d\n",
345                  hactive_a, hactive_b, vactive, v_total, h_total_sysclk);
346
347         return 0;
348
349 end:
350         dev_err(lt9611->dev, "read video check error\n");
351         return temp;
352 }
353
354 static void lt9611_hdmi_tx_digital(struct lt9611 *lt9611)
355 {
356         regmap_write(lt9611->regmap, 0x8443, 0x46 - lt9611->vic);
357         regmap_write(lt9611->regmap, 0x8447, lt9611->vic);
358         regmap_write(lt9611->regmap, 0x843d, 0x0a); /* UD1 infoframe */
359
360         regmap_write(lt9611->regmap, 0x82d6, 0x8c);
361         regmap_write(lt9611->regmap, 0x82d7, 0x04);
362 }
363
364 static void lt9611_hdmi_tx_phy(struct lt9611 *lt9611)
365 {
366         struct reg_sequence reg_cfg[] = {
367                 { 0x8130, 0x6a },
368                 { 0x8131, 0x44 }, /* HDMI DC mode */
369                 { 0x8132, 0x4a },
370                 { 0x8133, 0x0b },
371                 { 0x8134, 0x00 },
372                 { 0x8135, 0x00 },
373                 { 0x8136, 0x00 },
374                 { 0x8137, 0x44 },
375                 { 0x813f, 0x0f },
376                 { 0x8140, 0xa0 },
377                 { 0x8141, 0xa0 },
378                 { 0x8142, 0xa0 },
379                 { 0x8143, 0xa0 },
380                 { 0x8144, 0x0a },
381         };
382
383         /* HDMI AC mode */
384         if (lt9611->ac_mode)
385                 reg_cfg[2].def = 0x73;
386
387         regmap_multi_reg_write(lt9611->regmap, reg_cfg, ARRAY_SIZE(reg_cfg));
388 }
389
390 static irqreturn_t lt9611_irq_thread_handler(int irq, void *dev_id)
391 {
392         struct lt9611 *lt9611 = dev_id;
393         unsigned int irq_flag0 = 0;
394         unsigned int irq_flag3 = 0;
395
396         regmap_read(lt9611->regmap, 0x820f, &irq_flag3);
397         regmap_read(lt9611->regmap, 0x820c, &irq_flag0);
398
399         /* hpd changed low */
400         if (irq_flag3 & 0x80) {
401                 dev_info(lt9611->dev, "hdmi cable disconnected\n");
402
403                 regmap_write(lt9611->regmap, 0x8207, 0xbf);
404                 regmap_write(lt9611->regmap, 0x8207, 0x3f);
405         }
406
407         /* hpd changed high */
408         if (irq_flag3 & 0x40) {
409                 dev_info(lt9611->dev, "hdmi cable connected\n");
410
411                 regmap_write(lt9611->regmap, 0x8207, 0x7f);
412                 regmap_write(lt9611->regmap, 0x8207, 0x3f);
413         }
414
415         if (irq_flag3 & 0xc0 && lt9611->bridge.dev)
416                 drm_kms_helper_hotplug_event(lt9611->bridge.dev);
417
418         /* video input changed */
419         if (irq_flag0 & 0x01) {
420                 dev_info(lt9611->dev, "video input changed\n");
421                 regmap_write(lt9611->regmap, 0x829e, 0xff);
422                 regmap_write(lt9611->regmap, 0x829e, 0xf7);
423                 regmap_write(lt9611->regmap, 0x8204, 0xff);
424                 regmap_write(lt9611->regmap, 0x8204, 0xfe);
425         }
426
427         return IRQ_HANDLED;
428 }
429
430 static void lt9611_enable_hpd_interrupts(struct lt9611 *lt9611)
431 {
432         unsigned int val;
433
434         regmap_read(lt9611->regmap, 0x8203, &val);
435
436         val &= ~0xc0;
437         regmap_write(lt9611->regmap, 0x8203, val);
438         regmap_write(lt9611->regmap, 0x8207, 0xff); /* clear */
439         regmap_write(lt9611->regmap, 0x8207, 0x3f);
440 }
441
442 static void lt9611_sleep_setup(struct lt9611 *lt9611)
443 {
444         const struct reg_sequence sleep_setup[] = {
445                 { 0x8024, 0x76 },
446                 { 0x8023, 0x01 },
447                 { 0x8157, 0x03 }, /* set addr pin as output */
448                 { 0x8149, 0x0b },
449                 { 0x8151, 0x30 }, /* disable IRQ */
450                 { 0x8102, 0x48 }, /* MIPI Rx power down */
451                 { 0x8123, 0x80 },
452                 { 0x8130, 0x00 },
453                 { 0x8100, 0x01 }, /* bandgap power down */
454                 { 0x8101, 0x00 }, /* system clk power down */
455         };
456
457         regmap_multi_reg_write(lt9611->regmap,
458                                sleep_setup, ARRAY_SIZE(sleep_setup));
459         lt9611->sleep = true;
460 }
461
462 static int lt9611_power_on(struct lt9611 *lt9611)
463 {
464         int ret;
465         const struct reg_sequence seq[] = {
466                 /* LT9611_System_Init */
467                 { 0x8101, 0x18 }, /* sel xtal clock */
468
469                 /* timer for frequency meter */
470                 { 0x821b, 0x69 }, /* timer 2 */
471                 { 0x821c, 0x78 },
472                 { 0x82cb, 0x69 }, /* timer 1 */
473                 { 0x82cc, 0x78 },
474
475                 /* irq init */
476                 { 0x8251, 0x01 },
477                 { 0x8258, 0x0a }, /* hpd irq */
478                 { 0x8259, 0x80 }, /* hpd debounce width */
479                 { 0x829e, 0xf7 }, /* video check irq */
480
481                 /* power consumption for work */
482                 { 0x8004, 0xf0 },
483                 { 0x8006, 0xf0 },
484                 { 0x800a, 0x80 },
485                 { 0x800b, 0x40 },
486                 { 0x800d, 0xef },
487                 { 0x8011, 0xfa },
488         };
489
490         if (lt9611->power_on)
491                 return 0;
492
493         ret = regmap_multi_reg_write(lt9611->regmap, seq, ARRAY_SIZE(seq));
494         if (!ret)
495                 lt9611->power_on = true;
496
497         return ret;
498 }
499
500 static int lt9611_power_off(struct lt9611 *lt9611)
501 {
502         int ret;
503
504         ret = regmap_write(lt9611->regmap, 0x8130, 0x6a);
505         if (!ret)
506                 lt9611->power_on = false;
507
508         return ret;
509 }
510
511 static void lt9611_reset(struct lt9611 *lt9611)
512 {
513         gpiod_set_value_cansleep(lt9611->reset_gpio, 1);
514         msleep(20);
515
516         gpiod_set_value_cansleep(lt9611->reset_gpio, 0);
517         msleep(20);
518
519         gpiod_set_value_cansleep(lt9611->reset_gpio, 1);
520         msleep(100);
521 }
522
523 static void lt9611_assert_5v(struct lt9611 *lt9611)
524 {
525         if (!lt9611->enable_gpio)
526                 return;
527
528         gpiod_set_value_cansleep(lt9611->enable_gpio, 1);
529         msleep(20);
530 }
531
532 static int lt9611_regulator_init(struct lt9611 *lt9611)
533 {
534         int ret;
535
536         lt9611->supplies[0].supply = "vdd";
537         lt9611->supplies[1].supply = "vcc";
538
539         ret = devm_regulator_bulk_get(lt9611->dev, 2, lt9611->supplies);
540         if (ret < 0)
541                 return ret;
542
543         return regulator_set_load(lt9611->supplies[0].consumer, 300000);
544 }
545
546 static int lt9611_regulator_enable(struct lt9611 *lt9611)
547 {
548         int ret;
549
550         ret = regulator_enable(lt9611->supplies[0].consumer);
551         if (ret < 0)
552                 return ret;
553
554         usleep_range(1000, 10000);
555
556         ret = regulator_enable(lt9611->supplies[1].consumer);
557         if (ret < 0) {
558                 regulator_disable(lt9611->supplies[0].consumer);
559                 return ret;
560         }
561
562         return 0;
563 }
564
565 static struct lt9611_mode *lt9611_find_mode(const struct drm_display_mode *mode)
566 {
567         int i;
568
569         for (i = 0; i < ARRAY_SIZE(lt9611_modes); i++) {
570                 if (lt9611_modes[i].hdisplay == mode->hdisplay &&
571                     lt9611_modes[i].vdisplay == mode->vdisplay &&
572                     lt9611_modes[i].vrefresh == drm_mode_vrefresh(mode)) {
573                         return &lt9611_modes[i];
574                 }
575         }
576
577         return NULL;
578 }
579
580 /* connector funcs */
581 static enum drm_connector_status
582 lt9611_connector_detect(struct drm_connector *connector, bool force)
583 {
584         struct lt9611 *lt9611 = connector_to_lt9611(connector);
585         unsigned int reg_val = 0;
586         int connected = 0;
587
588         regmap_read(lt9611->regmap, 0x825e, &reg_val);
589         connected  = (reg_val & BIT(2));
590
591         lt9611->status = connected ?  connector_status_connected :
592                                 connector_status_disconnected;
593
594         return lt9611->status;
595 }
596
597 static int lt9611_read_edid(struct lt9611 *lt9611)
598 {
599         unsigned int temp;
600         int ret = 0;
601         int i, j;
602
603         /* memset to clear old buffer, if any */
604         memset(lt9611->edid_buf, 0, sizeof(lt9611->edid_buf));
605
606         regmap_write(lt9611->regmap, 0x8503, 0xc9);
607
608         /* 0xA0 is EDID device address */
609         regmap_write(lt9611->regmap, 0x8504, 0xa0);
610         /* 0x00 is EDID offset address */
611         regmap_write(lt9611->regmap, 0x8505, 0x00);
612
613         /* length for read */
614         regmap_write(lt9611->regmap, 0x8506, EDID_LEN);
615         regmap_write(lt9611->regmap, 0x8514, 0x7f);
616
617         for (i = 0; i < EDID_LOOP; i++) {
618                 /* offset address */
619                 regmap_write(lt9611->regmap, 0x8505, i * EDID_LEN);
620                 regmap_write(lt9611->regmap, 0x8507, 0x36);
621                 regmap_write(lt9611->regmap, 0x8507, 0x31);
622                 regmap_write(lt9611->regmap, 0x8507, 0x37);
623                 usleep_range(5000, 10000);
624
625                 regmap_read(lt9611->regmap, 0x8540, &temp);
626
627                 if (temp & KEY_DDC_ACCS_DONE) {
628                         for (j = 0; j < EDID_LEN; j++) {
629                                 regmap_read(lt9611->regmap, 0x8583, &temp);
630                                 lt9611->edid_buf[i * EDID_LEN + j] = temp;
631                         }
632
633                 } else if (temp & DDC_NO_ACK) { /* DDC No Ack or Abitration lost */
634                         dev_err(lt9611->dev, "read edid failed: no ack\n");
635                         ret = -EIO;
636                         goto end;
637
638                 } else {
639                         dev_err(lt9611->dev, "read edid failed: access not done\n");
640                         ret = -EIO;
641                         goto end;
642                 }
643         }
644
645 end:
646         regmap_write(lt9611->regmap, 0x8507, 0x1f);
647         return ret;
648 }
649
650 static int
651 lt9611_get_edid_block(void *data, u8 *buf, unsigned int block, size_t len)
652 {
653         struct lt9611 *lt9611 = data;
654         int ret;
655
656         if (len > 128)
657                 return -EINVAL;
658
659         /* supports up to 1 extension block */
660         /* TODO: add support for more extension blocks */
661         if (block > 1)
662                 return -EINVAL;
663
664         if (block == 0) {
665                 ret = lt9611_read_edid(lt9611);
666                 if (ret) {
667                         dev_err(lt9611->dev, "edid read failed\n");
668                         return ret;
669                 }
670         }
671
672         block %= 2;
673         memcpy(buf, lt9611->edid_buf + (block * 128), len);
674
675         return 0;
676 }
677
678 static int lt9611_connector_get_modes(struct drm_connector *connector)
679 {
680         struct lt9611 *lt9611 = connector_to_lt9611(connector);
681         unsigned int count;
682         struct edid *edid;
683
684         lt9611_power_on(lt9611);
685         edid = drm_do_get_edid(connector, lt9611_get_edid_block, lt9611);
686         drm_connector_update_edid_property(connector, edid);
687         count = drm_add_edid_modes(connector, edid);
688         kfree(edid);
689
690         return count;
691 }
692
693 static enum drm_mode_status
694 lt9611_connector_mode_valid(struct drm_connector *connector,
695                             struct drm_display_mode *mode)
696 {
697         struct lt9611_mode *lt9611_mode = lt9611_find_mode(mode);
698
699         return lt9611_mode ? MODE_OK : MODE_BAD;
700 }
701
702 /* bridge funcs */
703 static void lt9611_bridge_enable(struct drm_bridge *bridge)
704 {
705         struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
706
707         if (lt9611_power_on(lt9611)) {
708                 dev_err(lt9611->dev, "power on failed\n");
709                 return;
710         }
711
712         lt9611_mipi_input_analog(lt9611);
713         lt9611_hdmi_tx_digital(lt9611);
714         lt9611_hdmi_tx_phy(lt9611);
715
716         msleep(500);
717
718         lt9611_video_check(lt9611);
719
720         /* Enable HDMI output */
721         regmap_write(lt9611->regmap, 0x8130, 0xea);
722 }
723
724 static void lt9611_bridge_disable(struct drm_bridge *bridge)
725 {
726         struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
727         int ret;
728
729         /* Disable HDMI output */
730         ret = regmap_write(lt9611->regmap, 0x8130, 0x6a);
731         if (ret) {
732                 dev_err(lt9611->dev, "video on failed\n");
733                 return;
734         }
735
736         if (lt9611_power_off(lt9611)) {
737                 dev_err(lt9611->dev, "power on failed\n");
738                 return;
739         }
740 }
741
742 static struct
743 drm_connector_helper_funcs lt9611_bridge_connector_helper_funcs = {
744         .get_modes = lt9611_connector_get_modes,
745         .mode_valid = lt9611_connector_mode_valid,
746 };
747
748 static const struct drm_connector_funcs lt9611_bridge_connector_funcs = {
749         .fill_modes = drm_helper_probe_single_connector_modes,
750         .detect = lt9611_connector_detect,
751         .destroy = drm_connector_cleanup,
752         .reset = drm_atomic_helper_connector_reset,
753         .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
754         .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
755 };
756
757 static struct mipi_dsi_device *lt9611_attach_dsi(struct lt9611 *lt9611,
758                                                  struct device_node *dsi_node)
759 {
760         const struct mipi_dsi_device_info info = { "lt9611", 0, NULL };
761         struct mipi_dsi_device *dsi;
762         struct mipi_dsi_host *host;
763         int ret;
764
765         host = of_find_mipi_dsi_host_by_node(dsi_node);
766         if (!host) {
767                 dev_err(lt9611->dev, "failed to find dsi host\n");
768                 return ERR_PTR(-EPROBE_DEFER);
769         }
770
771         dsi = mipi_dsi_device_register_full(host, &info);
772         if (IS_ERR(dsi)) {
773                 dev_err(lt9611->dev, "failed to create dsi device\n");
774                 return dsi;
775         }
776
777         dsi->lanes = 4;
778         dsi->format = MIPI_DSI_FMT_RGB888;
779         dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
780                           MIPI_DSI_MODE_VIDEO_HSE;
781
782         ret = mipi_dsi_attach(dsi);
783         if (ret < 0) {
784                 dev_err(lt9611->dev, "failed to attach dsi to host\n");
785                 mipi_dsi_device_unregister(dsi);
786                 return ERR_PTR(ret);
787         }
788
789         return dsi;
790 }
791
792 static void lt9611_bridge_detach(struct drm_bridge *bridge)
793 {
794         struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
795
796         if (lt9611->dsi1) {
797                 mipi_dsi_detach(lt9611->dsi1);
798                 mipi_dsi_device_unregister(lt9611->dsi1);
799         }
800
801         mipi_dsi_detach(lt9611->dsi0);
802         mipi_dsi_device_unregister(lt9611->dsi0);
803 }
804
805 static int lt9611_connector_init(struct drm_bridge *bridge, struct lt9611 *lt9611)
806 {
807         int ret;
808
809         ret = drm_connector_init(bridge->dev, &lt9611->connector,
810                                  &lt9611_bridge_connector_funcs,
811                                  DRM_MODE_CONNECTOR_HDMIA);
812         if (ret) {
813                 DRM_ERROR("Failed to initialize connector with drm\n");
814                 return ret;
815         }
816
817         drm_connector_helper_add(&lt9611->connector,
818                                  &lt9611_bridge_connector_helper_funcs);
819         drm_connector_attach_encoder(&lt9611->connector, bridge->encoder);
820
821         if (!bridge->encoder) {
822                 DRM_ERROR("Parent encoder object not found");
823                 return -ENODEV;
824         }
825
826         return 0;
827 }
828
829 static int lt9611_bridge_attach(struct drm_bridge *bridge,
830                                 enum drm_bridge_attach_flags flags)
831 {
832         struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
833         int ret;
834
835         if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
836                 ret = lt9611_connector_init(bridge, lt9611);
837                 if (ret < 0)
838                         return ret;
839         }
840
841         /* Attach primary DSI */
842         lt9611->dsi0 = lt9611_attach_dsi(lt9611, lt9611->dsi0_node);
843         if (IS_ERR(lt9611->dsi0))
844                 return PTR_ERR(lt9611->dsi0);
845
846         /* Attach secondary DSI, if specified */
847         if (lt9611->dsi1_node) {
848                 lt9611->dsi1 = lt9611_attach_dsi(lt9611, lt9611->dsi1_node);
849                 if (IS_ERR(lt9611->dsi1)) {
850                         ret = PTR_ERR(lt9611->dsi1);
851                         goto err_unregister_dsi0;
852                 }
853         }
854
855         return 0;
856
857 err_unregister_dsi0:
858         lt9611_bridge_detach(bridge);
859         drm_connector_cleanup(&lt9611->connector);
860         mipi_dsi_device_unregister(lt9611->dsi0);
861
862         return ret;
863 }
864
865 static enum drm_mode_status lt9611_bridge_mode_valid(struct drm_bridge *bridge,
866                                                      const struct drm_display_info *info,
867                                                      const struct drm_display_mode *mode)
868 {
869         struct lt9611_mode *lt9611_mode = lt9611_find_mode(mode);
870
871         return lt9611_mode ? MODE_OK : MODE_BAD;
872 }
873
874 static void lt9611_bridge_pre_enable(struct drm_bridge *bridge)
875 {
876         struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
877
878         if (!lt9611->sleep)
879                 return;
880
881         lt9611_reset(lt9611);
882         regmap_write(lt9611->regmap, 0x80ee, 0x01);
883
884         lt9611->sleep = false;
885 }
886
887 static void lt9611_bridge_post_disable(struct drm_bridge *bridge)
888 {
889         struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
890
891         lt9611_sleep_setup(lt9611);
892 }
893
894 static void lt9611_bridge_mode_set(struct drm_bridge *bridge,
895                                    const struct drm_display_mode *mode,
896                                    const struct drm_display_mode *adj_mode)
897 {
898         struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
899         struct hdmi_avi_infoframe avi_frame;
900         int ret;
901
902         lt9611_bridge_pre_enable(bridge);
903
904         lt9611_mipi_input_digital(lt9611, mode);
905         lt9611_pll_setup(lt9611, mode);
906         lt9611_mipi_video_setup(lt9611, mode);
907         lt9611_pcr_setup(lt9611, mode);
908
909         ret = drm_hdmi_avi_infoframe_from_display_mode(&avi_frame,
910                                                        &lt9611->connector,
911                                                        mode);
912         if (!ret)
913                 lt9611->vic = avi_frame.video_code;
914 }
915
916 static enum drm_connector_status lt9611_bridge_detect(struct drm_bridge *bridge)
917 {
918         struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
919         unsigned int reg_val = 0;
920         int connected;
921
922         regmap_read(lt9611->regmap, 0x825e, &reg_val);
923         connected  = reg_val & BIT(2);
924
925         lt9611->status = connected ?  connector_status_connected :
926                                 connector_status_disconnected;
927
928         return lt9611->status;
929 }
930
931 static struct edid *lt9611_bridge_get_edid(struct drm_bridge *bridge,
932                                            struct drm_connector *connector)
933 {
934         struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
935
936         lt9611_power_on(lt9611);
937         return drm_do_get_edid(connector, lt9611_get_edid_block, lt9611);
938 }
939
940 static void lt9611_bridge_hpd_enable(struct drm_bridge *bridge)
941 {
942         struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
943
944         lt9611_enable_hpd_interrupts(lt9611);
945 }
946
947 static const struct drm_bridge_funcs lt9611_bridge_funcs = {
948         .attach = lt9611_bridge_attach,
949         .detach = lt9611_bridge_detach,
950         .mode_valid = lt9611_bridge_mode_valid,
951         .enable = lt9611_bridge_enable,
952         .disable = lt9611_bridge_disable,
953         .post_disable = lt9611_bridge_post_disable,
954         .mode_set = lt9611_bridge_mode_set,
955         .detect = lt9611_bridge_detect,
956         .get_edid = lt9611_bridge_get_edid,
957         .hpd_enable = lt9611_bridge_hpd_enable,
958 };
959
960 static int lt9611_parse_dt(struct device *dev,
961                            struct lt9611 *lt9611)
962 {
963         lt9611->dsi0_node = of_graph_get_remote_node(dev->of_node, 0, -1);
964         if (!lt9611->dsi0_node) {
965                 dev_err(lt9611->dev, "failed to get remote node for primary dsi\n");
966                 return -ENODEV;
967         }
968
969         lt9611->dsi1_node = of_graph_get_remote_node(dev->of_node, 1, -1);
970
971         lt9611->ac_mode = of_property_read_bool(dev->of_node, "lt,ac-mode");
972
973         return 0;
974 }
975
976 static int lt9611_gpio_init(struct lt9611 *lt9611)
977 {
978         struct device *dev = lt9611->dev;
979
980         lt9611->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
981         if (IS_ERR(lt9611->reset_gpio)) {
982                 dev_err(dev, "failed to acquire reset gpio\n");
983                 return PTR_ERR(lt9611->reset_gpio);
984         }
985
986         lt9611->enable_gpio = devm_gpiod_get_optional(dev, "enable",
987                                                       GPIOD_OUT_LOW);
988         if (IS_ERR(lt9611->enable_gpio)) {
989                 dev_err(dev, "failed to acquire enable gpio\n");
990                 return PTR_ERR(lt9611->enable_gpio);
991         }
992
993         return 0;
994 }
995
996 static int lt9611_read_device_rev(struct lt9611 *lt9611)
997 {
998         unsigned int rev;
999         int ret;
1000
1001         regmap_write(lt9611->regmap, 0x80ee, 0x01);
1002         ret = regmap_read(lt9611->regmap, 0x8002, &rev);
1003         if (ret)
1004                 dev_err(lt9611->dev, "failed to read revision: %d\n", ret);
1005         else
1006                 dev_info(lt9611->dev, "LT9611 revision: 0x%x\n", rev);
1007
1008         return ret;
1009 }
1010
1011 static int lt9611_hdmi_hw_params(struct device *dev, void *data,
1012                                  struct hdmi_codec_daifmt *fmt,
1013                                  struct hdmi_codec_params *hparms)
1014 {
1015         struct lt9611 *lt9611 = data;
1016
1017         if (hparms->sample_rate == 48000)
1018                 regmap_write(lt9611->regmap, 0x840f, 0x2b);
1019         else if (hparms->sample_rate == 96000)
1020                 regmap_write(lt9611->regmap, 0x840f, 0xab);
1021         else
1022                 return -EINVAL;
1023
1024         regmap_write(lt9611->regmap, 0x8435, 0x00);
1025         regmap_write(lt9611->regmap, 0x8436, 0x18);
1026         regmap_write(lt9611->regmap, 0x8437, 0x00);
1027
1028         return 0;
1029 }
1030
1031 static int lt9611_audio_startup(struct device *dev, void *data)
1032 {
1033         struct lt9611 *lt9611 = data;
1034
1035         regmap_write(lt9611->regmap, 0x82d6, 0x8c);
1036         regmap_write(lt9611->regmap, 0x82d7, 0x04);
1037
1038         regmap_write(lt9611->regmap, 0x8406, 0x08);
1039         regmap_write(lt9611->regmap, 0x8407, 0x10);
1040
1041         regmap_write(lt9611->regmap, 0x8434, 0xd5);
1042
1043         return 0;
1044 }
1045
1046 static void lt9611_audio_shutdown(struct device *dev, void *data)
1047 {
1048         struct lt9611 *lt9611 = data;
1049
1050         regmap_write(lt9611->regmap, 0x8406, 0x00);
1051         regmap_write(lt9611->regmap, 0x8407, 0x00);
1052 }
1053
1054 static int lt9611_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
1055                                       struct device_node *endpoint)
1056 {
1057         struct of_endpoint of_ep;
1058         int ret;
1059
1060         ret = of_graph_parse_endpoint(endpoint, &of_ep);
1061         if (ret < 0)
1062                 return ret;
1063
1064         /*
1065          * HDMI sound should be located as reg = <2>
1066          * Then, it is sound port 0
1067          */
1068         if (of_ep.port == 2)
1069                 return 0;
1070
1071         return -EINVAL;
1072 }
1073
1074 static const struct hdmi_codec_ops lt9611_codec_ops = {
1075         .hw_params      = lt9611_hdmi_hw_params,
1076         .audio_shutdown = lt9611_audio_shutdown,
1077         .audio_startup  = lt9611_audio_startup,
1078         .get_dai_id     = lt9611_hdmi_i2s_get_dai_id,
1079 };
1080
1081 static struct hdmi_codec_pdata codec_data = {
1082         .ops = &lt9611_codec_ops,
1083         .max_i2s_channels = 8,
1084         .i2s = 1,
1085 };
1086
1087 static int lt9611_audio_init(struct device *dev, struct lt9611 *lt9611)
1088 {
1089         codec_data.data = lt9611;
1090         lt9611->audio_pdev =
1091                 platform_device_register_data(dev, HDMI_CODEC_DRV_NAME,
1092                                               PLATFORM_DEVID_AUTO,
1093                                               &codec_data, sizeof(codec_data));
1094
1095         return PTR_ERR_OR_ZERO(lt9611->audio_pdev);
1096 }
1097
1098 static void lt9611_audio_exit(struct lt9611 *lt9611)
1099 {
1100         if (lt9611->audio_pdev) {
1101                 platform_device_unregister(lt9611->audio_pdev);
1102                 lt9611->audio_pdev = NULL;
1103         }
1104 }
1105
1106 static int lt9611_probe(struct i2c_client *client,
1107                         const struct i2c_device_id *id)
1108 {
1109         struct lt9611 *lt9611;
1110         struct device *dev = &client->dev;
1111         int ret;
1112
1113         if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
1114                 dev_err(dev, "device doesn't support I2C\n");
1115                 return -ENODEV;
1116         }
1117
1118         lt9611 = devm_kzalloc(dev, sizeof(*lt9611), GFP_KERNEL);
1119         if (!lt9611)
1120                 return -ENOMEM;
1121
1122         lt9611->dev = &client->dev;
1123         lt9611->client = client;
1124         lt9611->sleep = false;
1125
1126         lt9611->regmap = devm_regmap_init_i2c(client, &lt9611_regmap_config);
1127         if (IS_ERR(lt9611->regmap)) {
1128                 dev_err(lt9611->dev, "regmap i2c init failed\n");
1129                 return PTR_ERR(lt9611->regmap);
1130         }
1131
1132         ret = lt9611_parse_dt(&client->dev, lt9611);
1133         if (ret) {
1134                 dev_err(dev, "failed to parse device tree\n");
1135                 return ret;
1136         }
1137
1138         ret = lt9611_gpio_init(lt9611);
1139         if (ret < 0)
1140                 goto err_of_put;
1141
1142         ret = lt9611_regulator_init(lt9611);
1143         if (ret < 0)
1144                 goto err_of_put;
1145
1146         lt9611_assert_5v(lt9611);
1147
1148         ret = lt9611_regulator_enable(lt9611);
1149         if (ret)
1150                 goto err_of_put;
1151
1152         lt9611_reset(lt9611);
1153
1154         ret = lt9611_read_device_rev(lt9611);
1155         if (ret) {
1156                 dev_err(dev, "failed to read chip rev\n");
1157                 goto err_disable_regulators;
1158         }
1159
1160         ret = devm_request_threaded_irq(dev, client->irq, NULL,
1161                                         lt9611_irq_thread_handler,
1162                                         IRQF_ONESHOT, "lt9611", lt9611);
1163         if (ret) {
1164                 dev_err(dev, "failed to request irq\n");
1165                 goto err_disable_regulators;
1166         }
1167
1168         i2c_set_clientdata(client, lt9611);
1169
1170         lt9611->bridge.funcs = &lt9611_bridge_funcs;
1171         lt9611->bridge.of_node = client->dev.of_node;
1172         lt9611->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID |
1173                              DRM_BRIDGE_OP_HPD | DRM_BRIDGE_OP_MODES;
1174         lt9611->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
1175
1176         drm_bridge_add(&lt9611->bridge);
1177
1178         lt9611_enable_hpd_interrupts(lt9611);
1179
1180         return lt9611_audio_init(dev, lt9611);
1181
1182 err_disable_regulators:
1183         regulator_bulk_disable(ARRAY_SIZE(lt9611->supplies), lt9611->supplies);
1184
1185 err_of_put:
1186         of_node_put(lt9611->dsi1_node);
1187         of_node_put(lt9611->dsi0_node);
1188
1189         return ret;
1190 }
1191
1192 static int lt9611_remove(struct i2c_client *client)
1193 {
1194         struct lt9611 *lt9611 = i2c_get_clientdata(client);
1195
1196         disable_irq(client->irq);
1197         lt9611_audio_exit(lt9611);
1198         drm_bridge_remove(&lt9611->bridge);
1199
1200         regulator_bulk_disable(ARRAY_SIZE(lt9611->supplies), lt9611->supplies);
1201
1202         of_node_put(lt9611->dsi1_node);
1203         of_node_put(lt9611->dsi0_node);
1204
1205         return 0;
1206 }
1207
1208 static struct i2c_device_id lt9611_id[] = {
1209         { "lontium,lt9611", 0 },
1210         {}
1211 };
1212
1213 static const struct of_device_id lt9611_match_table[] = {
1214         { .compatible = "lontium,lt9611" },
1215         { }
1216 };
1217 MODULE_DEVICE_TABLE(of, lt9611_match_table);
1218
1219 static struct i2c_driver lt9611_driver = {
1220         .driver = {
1221                 .name = "lt9611",
1222                 .of_match_table = lt9611_match_table,
1223         },
1224         .probe = lt9611_probe,
1225         .remove = lt9611_remove,
1226         .id_table = lt9611_id,
1227 };
1228 module_i2c_driver(lt9611_driver);
1229
1230 MODULE_LICENSE("GPL v2");