1 // SPDX-License-Identifier: GPL-2.0+
4 * Driver for MicroAxial ADQ12-B data acquisition and control card
5 * written by jeremy theler <thelerg@ib.cnea.gov.ar>
7 * commission nacional de energia atomica
8 * universidad nacional de cuyo
11 * COMEDI - Linux Control and Measurement Device Interface
12 * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
17 * Description: Driver for MicroAxial ADQ12-B data acquisition and control card
18 * Devices: [MicroAxial] ADQ12-B (adq12b)
19 * Author: jeremy theler <thelerg@ib.cnea.gov.ar>
20 * Updated: Thu, 21 Feb 2008 02:56:27 -0300
23 * Configuration options:
24 * [0] - I/O base address (set with hardware jumpers)
26 * 0x300 1 (factory default)
32 * [1] - Analog Input unipolar/bipolar selection
33 * selection option JUB
34 * bipolar 0 2-3 (factory default)
36 * [2] - Analog Input single-ended/differential selection
37 * selection option JCHA JCHB
38 * single-ended 0 1-2 1-2 (factory default)
39 * differential 1 2-3 2-3
41 * Driver for the acquisition card ADQ12-B (without any add-on).
43 * - Analog input is subdevice 0 (16 channels single-ended or 8 differential)
44 * - Digital input is subdevice 1 (5 channels)
45 * - Digital output is subdevice 1 (8 channels)
46 * - The PACER is not supported in this version
49 #include <linux/module.h>
50 #include <linux/delay.h>
52 #include "../comedidev.h"
54 /* address scheme (page 2.17 of the manual) */
55 #define ADQ12B_CTREG 0x00
56 #define ADQ12B_CTREG_MSKP BIT(7) /* enable pacer interrupt */
57 #define ADQ12B_CTREG_GTP BIT(6) /* enable pacer */
58 #define ADQ12B_CTREG_RANGE(x) ((x) << 4)
59 #define ADQ12B_CTREG_CHAN(x) ((x) << 0)
60 #define ADQ12B_STINR 0x00
61 #define ADQ12B_STINR_OUT2 BIT(7) /* timer 2 output state */
62 #define ADQ12B_STINR_OUTP BIT(6) /* pacer output state */
63 #define ADQ12B_STINR_EOC BIT(5) /* A/D end-of-conversion */
64 #define ADQ12B_STINR_IN_MASK (0x1f << 0)
65 #define ADQ12B_OUTBR 0x04
66 #define ADQ12B_ADLOW 0x08
67 #define ADQ12B_ADHIG 0x09
68 #define ADQ12B_TIMER_BASE 0x0c
70 /* available ranges through the PGA gains */
71 static const struct comedi_lrange range_adq12b_ai_bipolar = {
80 static const struct comedi_lrange range_adq12b_ai_unipolar = {
89 struct adq12b_private {
90 unsigned int last_ctreg;
93 static int adq12b_ai_eoc(struct comedi_device *dev,
94 struct comedi_subdevice *s,
95 struct comedi_insn *insn,
96 unsigned long context)
100 status = inb(dev->iobase + ADQ12B_STINR);
101 if (status & ADQ12B_STINR_EOC)
106 static int adq12b_ai_insn_read(struct comedi_device *dev,
107 struct comedi_subdevice *s,
108 struct comedi_insn *insn,
111 struct adq12b_private *devpriv = dev->private;
112 unsigned int chan = CR_CHAN(insn->chanspec);
113 unsigned int range = CR_RANGE(insn->chanspec);
118 /* change channel and range only if it is different from the previous */
119 val = ADQ12B_CTREG_RANGE(range) | ADQ12B_CTREG_CHAN(chan);
120 if (val != devpriv->last_ctreg) {
121 outb(val, dev->iobase + ADQ12B_CTREG);
122 devpriv->last_ctreg = val;
123 usleep_range(50, 100); /* wait for the mux to settle */
126 val = inb(dev->iobase + ADQ12B_ADLOW); /* trigger A/D */
128 for (i = 0; i < insn->n; i++) {
129 ret = comedi_timeout(dev, s, insn, adq12b_ai_eoc, 0);
133 val = inb(dev->iobase + ADQ12B_ADHIG) << 8;
134 val |= inb(dev->iobase + ADQ12B_ADLOW); /* retriggers A/D */
142 static int adq12b_di_insn_bits(struct comedi_device *dev,
143 struct comedi_subdevice *s,
144 struct comedi_insn *insn, unsigned int *data)
146 /* only bits 0-4 have information about digital inputs */
147 data[1] = (inb(dev->iobase + ADQ12B_STINR) & ADQ12B_STINR_IN_MASK);
152 static int adq12b_do_insn_bits(struct comedi_device *dev,
153 struct comedi_subdevice *s,
154 struct comedi_insn *insn,
161 mask = comedi_dio_update_state(s, data);
163 for (chan = 0; chan < 8; chan++) {
164 if ((mask >> chan) & 0x01) {
165 val = (s->state >> chan) & 0x01;
166 outb((val << 3) | chan,
167 dev->iobase + ADQ12B_OUTBR);
177 static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
179 struct adq12b_private *devpriv;
180 struct comedi_subdevice *s;
183 ret = comedi_request_region(dev, it->options[0], 0x10);
187 devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
191 devpriv->last_ctreg = -1; /* force ctreg update */
193 ret = comedi_alloc_subdevices(dev, 3);
197 /* Analog Input subdevice */
198 s = &dev->subdevices[0];
199 s->type = COMEDI_SUBD_AI;
200 if (it->options[2]) {
201 s->subdev_flags = SDF_READABLE | SDF_DIFF;
204 s->subdev_flags = SDF_READABLE | SDF_GROUND;
208 s->range_table = it->options[1] ? &range_adq12b_ai_unipolar
209 : &range_adq12b_ai_bipolar;
210 s->insn_read = adq12b_ai_insn_read;
212 /* Digital Input subdevice */
213 s = &dev->subdevices[1];
214 s->type = COMEDI_SUBD_DI;
215 s->subdev_flags = SDF_READABLE;
218 s->range_table = &range_digital;
219 s->insn_bits = adq12b_di_insn_bits;
221 /* Digital Output subdevice */
222 s = &dev->subdevices[2];
223 s->type = COMEDI_SUBD_DO;
224 s->subdev_flags = SDF_WRITABLE;
227 s->range_table = &range_digital;
228 s->insn_bits = adq12b_do_insn_bits;
233 static struct comedi_driver adq12b_driver = {
234 .driver_name = "adq12b",
235 .module = THIS_MODULE,
236 .attach = adq12b_attach,
237 .detach = comedi_legacy_detach,
239 module_comedi_driver(adq12b_driver);
241 MODULE_AUTHOR("Comedi https://www.comedi.org");
242 MODULE_DESCRIPTION("Comedi low-level driver");
243 MODULE_LICENSE("GPL");