1 // SPDX-License-Identifier: GPL-2.0-only
3 * Keystone broadcast clock-event
5 * Copyright 2013 Texas Instruments, Inc.
7 * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
10 #include <linux/clk.h>
11 #include <linux/clockchips.h>
12 #include <linux/clocksource.h>
13 #include <linux/interrupt.h>
14 #include <linux/of_address.h>
15 #include <linux/of_irq.h>
17 #define TIMER_NAME "timer-keystone"
19 /* Timer register offsets */
26 #define INTCTLSTAT 0x44
28 /* Timer register bitfields */
29 #define TCR_ENAMODE_MASK 0xC0
30 #define TCR_ENAMODE_ONESHOT_MASK 0x40
31 #define TCR_ENAMODE_PERIODIC_MASK 0x80
33 #define TGCR_TIM_UNRESET_MASK 0x03
34 #define INTCTLSTAT_ENINT_MASK 0x01
37 * struct keystone_timer: holds timer's data
38 * @base: timer memory base address
39 * @hz_period: cycles per HZ period
40 * @event_dev: event device based on timer
42 static struct keystone_timer {
44 unsigned long hz_period;
45 struct clock_event_device event_dev;
48 static inline u32 keystone_timer_readl(unsigned long rg)
50 return readl_relaxed(timer.base + rg);
53 static inline void keystone_timer_writel(u32 val, unsigned long rg)
55 writel_relaxed(val, timer.base + rg);
59 * keystone_timer_barrier: write memory barrier
60 * use explicit barrier to avoid using readl/writel non relaxed function
61 * variants, because in our case non relaxed variants hide the true places
62 * where barrier is needed.
64 static inline void keystone_timer_barrier(void)
70 * keystone_timer_config: configures timer to work in oneshot/periodic modes.
71 * @ mask: mask of the mode to configure
72 * @ period: cycles number to configure for
74 static int keystone_timer_config(u64 period, int mask)
79 tcr = keystone_timer_readl(TCR);
80 off = tcr & ~(TCR_ENAMODE_MASK);
86 keystone_timer_writel(off, TCR);
87 /* here we have to be sure the timer has been disabled */
88 keystone_timer_barrier();
90 /* reset counter to zero, set new period */
91 keystone_timer_writel(0, TIM12);
92 keystone_timer_writel(0, TIM34);
93 keystone_timer_writel(period & 0xffffffff, PRD12);
94 keystone_timer_writel(period >> 32, PRD34);
98 * here we have to be sure that CNTLO, CNTHI, PRDLO, PRDHI registers
101 keystone_timer_barrier();
102 keystone_timer_writel(tcr, TCR);
106 static void keystone_timer_disable(void)
110 tcr = keystone_timer_readl(TCR);
113 tcr &= ~(TCR_ENAMODE_MASK);
114 keystone_timer_writel(tcr, TCR);
117 static irqreturn_t keystone_timer_interrupt(int irq, void *dev_id)
119 struct clock_event_device *evt = dev_id;
121 evt->event_handler(evt);
125 static int keystone_set_next_event(unsigned long cycles,
126 struct clock_event_device *evt)
128 return keystone_timer_config(cycles, TCR_ENAMODE_ONESHOT_MASK);
131 static int keystone_shutdown(struct clock_event_device *evt)
133 keystone_timer_disable();
137 static int keystone_set_periodic(struct clock_event_device *evt)
139 keystone_timer_config(timer.hz_period, TCR_ENAMODE_PERIODIC_MASK);
143 static int __init keystone_timer_init(struct device_node *np)
145 struct clock_event_device *event_dev = &timer.event_dev;
150 irq = irq_of_parse_and_map(np, 0);
152 pr_err("%s: failed to map interrupts\n", __func__);
156 timer.base = of_iomap(np, 0);
158 pr_err("%s: failed to map registers\n", __func__);
162 clk = of_clk_get(np, 0);
164 pr_err("%s: failed to get clock\n", __func__);
169 error = clk_prepare_enable(clk);
171 pr_err("%s: failed to enable clock\n", __func__);
175 rate = clk_get_rate(clk);
177 /* disable, use internal clock source */
178 keystone_timer_writel(0, TCR);
179 /* here we have to be sure the timer has been disabled */
180 keystone_timer_barrier();
182 /* reset timer as 64-bit, no pre-scaler, plus features are disabled */
183 keystone_timer_writel(0, TGCR);
186 keystone_timer_writel(TGCR_TIM_UNRESET_MASK, TGCR);
188 /* init counter to zero */
189 keystone_timer_writel(0, TIM12);
190 keystone_timer_writel(0, TIM34);
192 timer.hz_period = DIV_ROUND_UP(rate, HZ);
194 /* enable timer interrupts */
195 keystone_timer_writel(INTCTLSTAT_ENINT_MASK, INTCTLSTAT);
197 error = request_irq(irq, keystone_timer_interrupt, IRQF_TIMER,
198 TIMER_NAME, event_dev);
200 pr_err("%s: failed to setup irq\n", __func__);
204 /* setup clockevent */
205 event_dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
206 event_dev->set_next_event = keystone_set_next_event;
207 event_dev->set_state_shutdown = keystone_shutdown;
208 event_dev->set_state_periodic = keystone_set_periodic;
209 event_dev->set_state_oneshot = keystone_shutdown;
210 event_dev->cpumask = cpu_possible_mask;
211 event_dev->owner = THIS_MODULE;
212 event_dev->name = TIMER_NAME;
213 event_dev->irq = irq;
215 clockevents_config_and_register(event_dev, rate, 1, ULONG_MAX);
217 pr_info("keystone timer clock @%lu Hz\n", rate);
225 TIMER_OF_DECLARE(keystone_timer, "ti,keystone-timer",
226 keystone_timer_init);