drivers/char/tpm/st33zp24/spi.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * STMicroelectronics TPM SPI Linux driver for TPM ST33ZP24
   4  * Copyright (C) 2009 - 2016 STMicroelectronics
   5  */
   6
   7 #include <linux/module.h>
   8 #include <linux/spi/spi.h>
   9 #include <linux/of.h>
  10 #include <linux/acpi.h>
  11 #include <linux/tpm.h>
  12
  13 #include "../tpm.h"
  14 #include "st33zp24.h"
  15
  16 #define TPM_DATA_FIFO           0x24
  17 #define TPM_INTF_CAPABILITY     0x14
  18
  19 #define TPM_DUMMY_BYTE          0x00
  20
  21 #define MAX_SPI_LATENCY         15
  22 #define LOCALITY0               0
  23
  24 #define ST33ZP24_OK                                     0x5A
  25 #define ST33ZP24_UNDEFINED_ERR                          0x80
  26 #define ST33ZP24_BADLOCALITY                            0x81
  27 #define ST33ZP24_TISREGISTER_UNKNOWN                    0x82
  28 #define ST33ZP24_LOCALITY_NOT_ACTIVATED                 0x83
  29 #define ST33ZP24_HASH_END_BEFORE_HASH_START             0x84
  30 #define ST33ZP24_BAD_COMMAND_ORDER                      0x85
  31 #define ST33ZP24_INCORECT_RECEIVED_LENGTH               0x86
  32 #define ST33ZP24_TPM_FIFO_OVERFLOW                      0x89
  33 #define ST33ZP24_UNEXPECTED_READ_FIFO                   0x8A
  34 #define ST33ZP24_UNEXPECTED_WRITE_FIFO                  0x8B
  35 #define ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END    0x90
  36 #define ST33ZP24_DUMMY_BYTES                            0x00
  37
  38 /*
  39  * TPM command can be up to 2048 byte, A TPM response can be up to
  40  * 1024 byte.
  41  * Between command and response, there are latency byte (up to 15
  42  * usually on st33zp24 2 are enough).
  43  *
  44  * Overall when sending a command and expecting an answer we need if
  45  * worst case:
  46  * 2048 (for the TPM command) + 1024 (for the TPM answer).  We need
  47  * some latency byte before the answer is available (max 15).
  48  * We have 2048 + 1024 + 15.
  49  */
  50 #define ST33ZP24_SPI_BUFFER_SIZE (ST33ZP24_BUFSIZE + (ST33ZP24_BUFSIZE / 2) +\
  51                                   MAX_SPI_LATENCY)
  52
  53
  54 struct st33zp24_spi_phy {
  55         struct spi_device *spi_device;
  56
  57         u8 tx_buf[ST33ZP24_SPI_BUFFER_SIZE];
  58         u8 rx_buf[ST33ZP24_SPI_BUFFER_SIZE];
  59
  60         int latency;
  61 };
  62
  63 static int st33zp24_status_to_errno(u8 code)
  64 {
  65         switch (code) {
  66         case ST33ZP24_OK:
  67                 return 0;
  68         case ST33ZP24_UNDEFINED_ERR:
  69         case ST33ZP24_BADLOCALITY:
  70         case ST33ZP24_TISREGISTER_UNKNOWN:
  71         case ST33ZP24_LOCALITY_NOT_ACTIVATED:
  72         case ST33ZP24_HASH_END_BEFORE_HASH_START:
  73         case ST33ZP24_BAD_COMMAND_ORDER:
  74         case ST33ZP24_UNEXPECTED_READ_FIFO:
  75         case ST33ZP24_UNEXPECTED_WRITE_FIFO:
  76         case ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END:
  77                 return -EPROTO;
  78         case ST33ZP24_INCORECT_RECEIVED_LENGTH:
  79         case ST33ZP24_TPM_FIFO_OVERFLOW:
  80                 return -EMSGSIZE;
  81         case ST33ZP24_DUMMY_BYTES:
  82                 return -ENOSYS;
  83         }
  84         return code;
  85 }
  86
  87 /*
  88  * st33zp24_spi_send
  89  * Send byte to the TIS register according to the ST33ZP24 SPI protocol.
  90  * @param: phy_id, the phy description
  91  * @param: tpm_register, the tpm tis register where the data should be written
  92  * @param: tpm_data, the tpm_data to write inside the tpm_register
  93  * @param: tpm_size, The length of the data
  94  * @return: should be zero if success else a negative error code.
  95  */
  96 static int st33zp24_spi_send(void *phy_id, u8 tpm_register, u8 *tpm_data,
  97                              int tpm_size)
  98 {
  99         int total_length = 0, ret = 0;
 100         struct st33zp24_spi_phy *phy = phy_id;
 101         struct spi_device *dev = phy->spi_device;
 102         struct spi_transfer spi_xfer = {
 103                 .tx_buf = phy->tx_buf,
 104                 .rx_buf = phy->rx_buf,
 105         };
 106
 107         /* Pre-Header */
 108         phy->tx_buf[total_length++] = TPM_WRITE_DIRECTION | LOCALITY0;
 109         phy->tx_buf[total_length++] = tpm_register;
 110
 111         if (tpm_size > 0 && tpm_register == TPM_DATA_FIFO) {
 112                 phy->tx_buf[total_length++] = tpm_size >> 8;
 113                 phy->tx_buf[total_length++] = tpm_size;
 114         }
 115
 116         memcpy(&phy->tx_buf[total_length], tpm_data, tpm_size);
 117         total_length += tpm_size;
 118
 119         memset(&phy->tx_buf[total_length], TPM_DUMMY_BYTE, phy->latency);
 120
 121         spi_xfer.len = total_length + phy->latency;
 122
 123         ret = spi_sync_transfer(dev, &spi_xfer, 1);
 124         if (ret == 0)
 125                 ret = phy->rx_buf[total_length + phy->latency - 1];
 126
 127         return st33zp24_status_to_errno(ret);
 128 } /* st33zp24_spi_send() */
 129
 130 /*
 131  * st33zp24_spi_read8_recv
 132  * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
 133  * @param: phy_id, the phy description
 134  * @param: tpm_register, the tpm tis register where the data should be read
 135  * @param: tpm_data, the TPM response
 136  * @param: tpm_size, tpm TPM response size to read.
 137  * @return: should be zero if success else a negative error code.
 138  */
 139 static int st33zp24_spi_read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data,
 140                                   int tpm_size)
 141 {
 142         int total_length = 0, ret;
 143         struct st33zp24_spi_phy *phy = phy_id;
 144         struct spi_device *dev = phy->spi_device;
 145         struct spi_transfer spi_xfer = {
 146                 .tx_buf = phy->tx_buf,
 147                 .rx_buf = phy->rx_buf,
 148         };
 149
 150         /* Pre-Header */
 151         phy->tx_buf[total_length++] = LOCALITY0;
 152         phy->tx_buf[total_length++] = tpm_register;
 153
 154         memset(&phy->tx_buf[total_length], TPM_DUMMY_BYTE,
 155                phy->latency + tpm_size);
 156
 157         spi_xfer.len = total_length + phy->latency + tpm_size;
 158
 159         /* header + status byte + size of the data + status byte */
 160         ret = spi_sync_transfer(dev, &spi_xfer, 1);
 161         if (tpm_size > 0 && ret == 0) {
 162                 ret = phy->rx_buf[total_length + phy->latency - 1];
 163
 164                 memcpy(tpm_data, phy->rx_buf + total_length + phy->latency,
 165                        tpm_size);
 166         }
 167
 168         return ret;
 169 } /* st33zp24_spi_read8_reg() */
 170
 171 /*
 172  * st33zp24_spi_recv
 173  * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
 174  * @param: phy_id, the phy description
 175  * @param: tpm_register, the tpm tis register where the data should be read
 176  * @param: tpm_data, the TPM response
 177  * @param: tpm_size, tpm TPM response size to read.
 178  * @return: number of byte read successfully: should be one if success.
 179  */
 180 static int st33zp24_spi_recv(void *phy_id, u8 tpm_register, u8 *tpm_data,
 181                              int tpm_size)
 182 {
 183         int ret;
 184
 185         ret = st33zp24_spi_read8_reg(phy_id, tpm_register, tpm_data, tpm_size);
 186         if (!st33zp24_status_to_errno(ret))
 187                 return tpm_size;
 188         return ret;
 189 } /* st33zp24_spi_recv() */
 190
 191 static int st33zp24_spi_evaluate_latency(void *phy_id)
 192 {
 193         struct st33zp24_spi_phy *phy = phy_id;
 194         int latency = 1, status = 0;
 195         u8 data = 0;
 196
 197         while (!status && latency < MAX_SPI_LATENCY) {
 198                 phy->latency = latency;
 199                 status = st33zp24_spi_read8_reg(phy_id, TPM_INTF_CAPABILITY,
 200                                                 &data, 1);
 201                 latency++;
 202         }
 203         if (status < 0)
 204                 return status;
 205         if (latency == MAX_SPI_LATENCY)
 206                 return -ENODEV;
 207
 208         return latency - 1;
 209 } /* evaluate_latency() */
 210
 211 static const struct st33zp24_phy_ops spi_phy_ops = {
 212         .send = st33zp24_spi_send,
 213         .recv = st33zp24_spi_recv,
 214 };
 215
 216 /*
 217  * st33zp24_spi_probe initialize the TPM device
 218  * @param: dev, the spi_device description (TPM SPI description).
 219  * @return: 0 in case of success.
 220  *       or a negative value describing the error.
 221  */
 222 static int st33zp24_spi_probe(struct spi_device *dev)
 223 {
 224         struct st33zp24_spi_phy *phy;
 225
 226         phy = devm_kzalloc(&dev->dev, sizeof(struct st33zp24_spi_phy),
 227                            GFP_KERNEL);
 228         if (!phy)
 229                 return -ENOMEM;
 230
 231         phy->spi_device = dev;
 232
 233         phy->latency = st33zp24_spi_evaluate_latency(phy);
 234         if (phy->latency <= 0)
 235                 return -ENODEV;
 236
 237         return st33zp24_probe(phy, &spi_phy_ops, &dev->dev, dev->irq);
 238 }
 239
 240 /*
 241  * st33zp24_spi_remove remove the TPM device
 242  * @param: client, the spi_device description (TPM SPI description).
 243  * @return: 0 in case of success.
 244  */
 245 static void st33zp24_spi_remove(struct spi_device *dev)
 246 {
 247         struct tpm_chip *chip = spi_get_drvdata(dev);
 248
 249         st33zp24_remove(chip);
 250 }
 251
 252 static const struct spi_device_id st33zp24_spi_id[] = {
 253         {TPM_ST33_SPI, 0},
 254         {}
 255 };
 256 MODULE_DEVICE_TABLE(spi, st33zp24_spi_id);
 257
 258 static const struct of_device_id of_st33zp24_spi_match[] __maybe_unused = {
 259         { .compatible = "st,st33zp24-spi", },
 260         {}
 261 };
 262 MODULE_DEVICE_TABLE(of, of_st33zp24_spi_match);
 263
 264 static const struct acpi_device_id st33zp24_spi_acpi_match[] __maybe_unused = {
 265         {"SMO3324"},
 266         {}
 267 };
 268 MODULE_DEVICE_TABLE(acpi, st33zp24_spi_acpi_match);
 269
 270 static SIMPLE_DEV_PM_OPS(st33zp24_spi_ops, st33zp24_pm_suspend,
 271                          st33zp24_pm_resume);
 272
 273 static struct spi_driver st33zp24_spi_driver = {
 274         .driver = {
 275                 .name = "st33zp24-spi",
 276                 .pm = &st33zp24_spi_ops,
 277                 .of_match_table = of_match_ptr(of_st33zp24_spi_match),
 278                 .acpi_match_table = ACPI_PTR(st33zp24_spi_acpi_match),
 279         },
 280         .probe = st33zp24_spi_probe,
 281         .remove = st33zp24_spi_remove,
 282         .id_table = st33zp24_spi_id,
 283 };
 284
 285 module_spi_driver(st33zp24_spi_driver);
 286
 287 MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)");
 288 MODULE_DESCRIPTION("STM TPM 1.2 SPI ST33 Driver");
 289 MODULE_VERSION("1.3.0");
 290 MODULE_LICENSE("GPL");