3 * Generic Bluetooth USB driver
5 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/module.h>
25 #include <linux/usb.h>
26 #include <linux/firmware.h>
27 #include <linux/of_device.h>
28 #include <linux/of_irq.h>
29 #include <linux/suspend.h>
30 #include <asm/unaligned.h>
32 #include <net/bluetooth/bluetooth.h>
33 #include <net/bluetooth/hci_core.h>
41 static bool disable_scofix;
42 static bool force_scofix;
44 static bool reset = true;
46 static struct usb_driver btusb_driver;
48 #define BTUSB_IGNORE 0x01
49 #define BTUSB_DIGIANSWER 0x02
50 #define BTUSB_CSR 0x04
51 #define BTUSB_SNIFFER 0x08
52 #define BTUSB_BCM92035 0x10
53 #define BTUSB_BROKEN_ISOC 0x20
54 #define BTUSB_WRONG_SCO_MTU 0x40
55 #define BTUSB_ATH3012 0x80
56 #define BTUSB_INTEL 0x100
57 #define BTUSB_INTEL_BOOT 0x200
58 #define BTUSB_BCM_PATCHRAM 0x400
59 #define BTUSB_MARVELL 0x800
60 #define BTUSB_SWAVE 0x1000
61 #define BTUSB_INTEL_NEW 0x2000
62 #define BTUSB_AMP 0x4000
63 #define BTUSB_QCA_ROME 0x8000
64 #define BTUSB_BCM_APPLE 0x10000
65 #define BTUSB_REALTEK 0x20000
66 #define BTUSB_BCM2045 0x40000
67 #define BTUSB_IFNUM_2 0x80000
68 #define BTUSB_CW6622 0x100000
70 static const struct usb_device_id btusb_table[] = {
71 /* Generic Bluetooth USB device */
72 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
74 /* Generic Bluetooth AMP device */
75 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
77 /* Generic Bluetooth USB interface */
78 { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
80 /* Apple-specific (Broadcom) devices */
81 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
82 .driver_info = BTUSB_BCM_APPLE | BTUSB_IFNUM_2 },
84 /* MediaTek MT76x0E */
85 { USB_DEVICE(0x0e8d, 0x763f) },
87 /* Broadcom SoftSailing reporting vendor specific */
88 { USB_DEVICE(0x0a5c, 0x21e1) },
90 /* Apple MacBookPro 7,1 */
91 { USB_DEVICE(0x05ac, 0x8213) },
94 { USB_DEVICE(0x05ac, 0x8215) },
96 /* Apple MacBookPro6,2 */
97 { USB_DEVICE(0x05ac, 0x8218) },
99 /* Apple MacBookAir3,1, MacBookAir3,2 */
100 { USB_DEVICE(0x05ac, 0x821b) },
102 /* Apple MacBookAir4,1 */
103 { USB_DEVICE(0x05ac, 0x821f) },
105 /* Apple MacBookPro8,2 */
106 { USB_DEVICE(0x05ac, 0x821a) },
108 /* Apple MacMini5,1 */
109 { USB_DEVICE(0x05ac, 0x8281) },
111 /* AVM BlueFRITZ! USB v2.0 */
112 { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },
114 /* Bluetooth Ultraport Module from IBM */
115 { USB_DEVICE(0x04bf, 0x030a) },
117 /* ALPS Modules with non-standard id */
118 { USB_DEVICE(0x044e, 0x3001) },
119 { USB_DEVICE(0x044e, 0x3002) },
121 /* Ericsson with non-standard id */
122 { USB_DEVICE(0x0bdb, 0x1002) },
124 /* Canyon CN-BTU1 with HID interfaces */
125 { USB_DEVICE(0x0c10, 0x0000) },
127 /* Broadcom BCM20702A0 */
128 { USB_DEVICE(0x413c, 0x8197) },
130 /* Broadcom BCM20702B0 (Dynex/Insignia) */
131 { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
133 /* Broadcom BCM43142A0 (Foxconn/Lenovo) */
134 { USB_VENDOR_AND_INTERFACE_INFO(0x105b, 0xff, 0x01, 0x01),
135 .driver_info = BTUSB_BCM_PATCHRAM },
137 /* Broadcom BCM920703 (HTC Vive) */
138 { USB_VENDOR_AND_INTERFACE_INFO(0x0bb4, 0xff, 0x01, 0x01),
139 .driver_info = BTUSB_BCM_PATCHRAM },
141 /* Foxconn - Hon Hai */
142 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
143 .driver_info = BTUSB_BCM_PATCHRAM },
145 /* Lite-On Technology - Broadcom based */
146 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
147 .driver_info = BTUSB_BCM_PATCHRAM },
149 /* Broadcom devices with vendor specific id */
150 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
151 .driver_info = BTUSB_BCM_PATCHRAM },
153 /* ASUSTek Computer - Broadcom based */
154 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
155 .driver_info = BTUSB_BCM_PATCHRAM },
157 /* Belkin F8065bf - Broadcom based */
158 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
159 .driver_info = BTUSB_BCM_PATCHRAM },
161 /* IMC Networks - Broadcom based */
162 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
163 .driver_info = BTUSB_BCM_PATCHRAM },
165 /* Dell Computer - Broadcom based */
166 { USB_VENDOR_AND_INTERFACE_INFO(0x413c, 0xff, 0x01, 0x01),
167 .driver_info = BTUSB_BCM_PATCHRAM },
169 /* Toshiba Corp - Broadcom based */
170 { USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
171 .driver_info = BTUSB_BCM_PATCHRAM },
173 /* Intel Bluetooth USB Bootloader (RAM module) */
174 { USB_DEVICE(0x8087, 0x0a5a),
175 .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
177 { } /* Terminating entry */
180 MODULE_DEVICE_TABLE(usb, btusb_table);
182 static const struct usb_device_id blacklist_table[] = {
183 /* CSR BlueCore devices */
184 { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
186 /* Broadcom BCM2033 without firmware */
187 { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
189 /* Broadcom BCM2045 devices */
190 { USB_DEVICE(0x0a5c, 0x2045), .driver_info = BTUSB_BCM2045 },
192 /* Atheros 3011 with sflash firmware */
193 { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
194 { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
195 { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
196 { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
197 { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
198 { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
199 { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
201 /* Atheros AR9285 Malbec with sflash firmware */
202 { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
204 /* Atheros 3012 with sflash firmware */
205 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
206 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
207 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
208 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
209 { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
210 { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
211 { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
212 { USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 },
213 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
214 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
215 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
216 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
217 { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
218 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
219 { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
220 { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
221 { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
222 { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
223 { USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
224 { USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
225 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
226 { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
227 { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
228 { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
229 { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
230 { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
231 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
232 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
233 { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
234 { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
235 { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
236 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
237 { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
238 { USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 },
239 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
240 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
241 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
242 { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
243 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
244 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
245 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
246 { USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 },
247 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
248 { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
249 { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
250 { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
251 { USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
252 { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
253 { USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
254 { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
256 /* Atheros AR5BBU12 with sflash firmware */
257 { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
259 /* Atheros AR5BBU12 with sflash firmware */
260 { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
261 { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
263 /* QCA ROME chipset */
264 { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
265 { USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME },
266 { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
267 { USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME },
268 { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
269 { USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME },
270 { USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME },
271 { USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME },
272 { USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME },
273 { USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME },
275 /* Broadcom BCM2035 */
276 { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
277 { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
278 { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
280 /* Broadcom BCM2045 */
281 { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
282 { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },
284 /* IBM/Lenovo ThinkPad with Broadcom chip */
285 { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
286 { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },
288 /* HP laptop with Broadcom chip */
289 { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },
291 /* Dell laptop with Broadcom chip */
292 { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },
294 /* Dell Wireless 370 and 410 devices */
295 { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
296 { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },
298 /* Belkin F8T012 and F8T013 devices */
299 { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
300 { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },
302 /* Asus WL-BTD202 device */
303 { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
305 /* Kensington Bluetooth USB adapter */
306 { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },
308 /* RTX Telecom based adapters with buggy SCO support */
309 { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
310 { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
312 /* CONWISE Technology based adapters with buggy SCO support */
313 { USB_DEVICE(0x0e5e, 0x6622),
314 .driver_info = BTUSB_BROKEN_ISOC | BTUSB_CW6622},
316 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
317 { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
319 /* Digianswer devices */
320 { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
321 { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
323 /* CSR BlueCore Bluetooth Sniffer */
324 { USB_DEVICE(0x0a12, 0x0002),
325 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
327 /* Frontline ComProbe Bluetooth Sniffer */
328 { USB_DEVICE(0x16d3, 0x0002),
329 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
331 /* Marvell Bluetooth devices */
332 { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
333 { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
334 { USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL },
336 /* Intel Bluetooth devices */
337 { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_NEW },
338 { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
339 { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
340 { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
341 { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
342 { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL },
343 { USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_NEW },
345 /* Other Intel Bluetooth devices */
346 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
347 .driver_info = BTUSB_IGNORE },
349 /* Realtek Bluetooth devices */
350 { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
351 .driver_info = BTUSB_REALTEK },
353 /* Additional Realtek 8723AE Bluetooth devices */
354 { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
355 { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
357 /* Additional Realtek 8723BE Bluetooth devices */
358 { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
359 { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
360 { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
361 { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
362 { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
363 { USB_DEVICE(0x13d3, 0x3494), .driver_info = BTUSB_REALTEK },
365 /* Additional Realtek 8821AE Bluetooth devices */
366 { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
367 { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
368 { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
369 { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
370 { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
372 /* Silicon Wave based devices */
373 { USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
375 { } /* Terminating entry */
378 #define BTUSB_MAX_ISOC_FRAMES 10
380 #define BTUSB_INTR_RUNNING 0
381 #define BTUSB_BULK_RUNNING 1
382 #define BTUSB_ISOC_RUNNING 2
383 #define BTUSB_SUSPENDING 3
384 #define BTUSB_DID_ISO_RESUME 4
385 #define BTUSB_BOOTLOADER 5
386 #define BTUSB_DOWNLOADING 6
387 #define BTUSB_FIRMWARE_LOADED 7
388 #define BTUSB_FIRMWARE_FAILED 8
389 #define BTUSB_BOOTING 9
390 #define BTUSB_RESET_RESUME 10
391 #define BTUSB_DIAG_RUNNING 11
392 #define BTUSB_OOB_WAKE_ENABLED 12
395 struct hci_dev *hdev;
396 struct usb_device *udev;
397 struct usb_interface *intf;
398 struct usb_interface *isoc;
399 struct usb_interface *diag;
403 struct work_struct work;
404 struct work_struct waker;
406 struct usb_anchor deferred;
407 struct usb_anchor tx_anchor;
411 struct usb_anchor intr_anchor;
412 struct usb_anchor bulk_anchor;
413 struct usb_anchor isoc_anchor;
414 struct usb_anchor diag_anchor;
417 struct sk_buff *evt_skb;
418 struct sk_buff *acl_skb;
419 struct sk_buff *sco_skb;
421 struct usb_endpoint_descriptor *intr_ep;
422 struct usb_endpoint_descriptor *bulk_tx_ep;
423 struct usb_endpoint_descriptor *bulk_rx_ep;
424 struct usb_endpoint_descriptor *isoc_tx_ep;
425 struct usb_endpoint_descriptor *isoc_rx_ep;
426 struct usb_endpoint_descriptor *diag_tx_ep;
427 struct usb_endpoint_descriptor *diag_rx_ep;
432 unsigned int sco_num;
436 int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
437 int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
439 int (*setup_on_usb)(struct hci_dev *hdev);
441 int oob_wake_irq; /* irq for out-of-band wake-on-bt */
444 static inline void btusb_free_frags(struct btusb_data *data)
448 spin_lock_irqsave(&data->rxlock, flags);
450 kfree_skb(data->evt_skb);
451 data->evt_skb = NULL;
453 kfree_skb(data->acl_skb);
454 data->acl_skb = NULL;
456 kfree_skb(data->sco_skb);
457 data->sco_skb = NULL;
459 spin_unlock_irqrestore(&data->rxlock, flags);
462 static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
467 spin_lock(&data->rxlock);
474 skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
480 hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
481 hci_skb_expect(skb) = HCI_EVENT_HDR_SIZE;
484 len = min_t(uint, hci_skb_expect(skb), count);
485 skb_put_data(skb, buffer, len);
489 hci_skb_expect(skb) -= len;
491 if (skb->len == HCI_EVENT_HDR_SIZE) {
492 /* Complete event header */
493 hci_skb_expect(skb) = hci_event_hdr(skb)->plen;
495 if (skb_tailroom(skb) < hci_skb_expect(skb)) {
504 if (!hci_skb_expect(skb)) {
506 data->recv_event(data->hdev, skb);
512 spin_unlock(&data->rxlock);
517 static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
522 spin_lock(&data->rxlock);
529 skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
535 hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT;
536 hci_skb_expect(skb) = HCI_ACL_HDR_SIZE;
539 len = min_t(uint, hci_skb_expect(skb), count);
540 skb_put_data(skb, buffer, len);
544 hci_skb_expect(skb) -= len;
546 if (skb->len == HCI_ACL_HDR_SIZE) {
547 __le16 dlen = hci_acl_hdr(skb)->dlen;
549 /* Complete ACL header */
550 hci_skb_expect(skb) = __le16_to_cpu(dlen);
552 if (skb_tailroom(skb) < hci_skb_expect(skb)) {
561 if (!hci_skb_expect(skb)) {
563 hci_recv_frame(data->hdev, skb);
569 spin_unlock(&data->rxlock);
574 static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
579 spin_lock(&data->rxlock);
586 skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
592 hci_skb_pkt_type(skb) = HCI_SCODATA_PKT;
593 hci_skb_expect(skb) = HCI_SCO_HDR_SIZE;
596 len = min_t(uint, hci_skb_expect(skb), count);
597 skb_put_data(skb, buffer, len);
601 hci_skb_expect(skb) -= len;
603 if (skb->len == HCI_SCO_HDR_SIZE) {
604 /* Complete SCO header */
605 hci_skb_expect(skb) = hci_sco_hdr(skb)->dlen;
607 if (skb_tailroom(skb) < hci_skb_expect(skb)) {
616 if (!hci_skb_expect(skb)) {
618 hci_recv_frame(data->hdev, skb);
624 spin_unlock(&data->rxlock);
629 static void btusb_intr_complete(struct urb *urb)
631 struct hci_dev *hdev = urb->context;
632 struct btusb_data *data = hci_get_drvdata(hdev);
635 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
638 if (!test_bit(HCI_RUNNING, &hdev->flags))
641 if (urb->status == 0) {
642 hdev->stat.byte_rx += urb->actual_length;
644 if (btusb_recv_intr(data, urb->transfer_buffer,
645 urb->actual_length) < 0) {
646 bt_dev_err(hdev, "corrupted event packet");
649 } else if (urb->status == -ENOENT) {
650 /* Avoid suspend failed when usb_kill_urb */
654 if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
657 usb_mark_last_busy(data->udev);
658 usb_anchor_urb(urb, &data->intr_anchor);
660 err = usb_submit_urb(urb, GFP_ATOMIC);
662 /* -EPERM: urb is being killed;
663 * -ENODEV: device got disconnected
665 if (err != -EPERM && err != -ENODEV)
666 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
668 usb_unanchor_urb(urb);
672 static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
674 struct btusb_data *data = hci_get_drvdata(hdev);
680 BT_DBG("%s", hdev->name);
685 urb = usb_alloc_urb(0, mem_flags);
689 size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
691 buf = kmalloc(size, mem_flags);
697 pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);
699 usb_fill_int_urb(urb, data->udev, pipe, buf, size,
700 btusb_intr_complete, hdev, data->intr_ep->bInterval);
702 urb->transfer_flags |= URB_FREE_BUFFER;
704 usb_anchor_urb(urb, &data->intr_anchor);
706 err = usb_submit_urb(urb, mem_flags);
708 if (err != -EPERM && err != -ENODEV)
709 bt_dev_err(hdev, "urb %p submission failed (%d)",
711 usb_unanchor_urb(urb);
719 static void btusb_bulk_complete(struct urb *urb)
721 struct hci_dev *hdev = urb->context;
722 struct btusb_data *data = hci_get_drvdata(hdev);
725 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
728 if (!test_bit(HCI_RUNNING, &hdev->flags))
731 if (urb->status == 0) {
732 hdev->stat.byte_rx += urb->actual_length;
734 if (data->recv_bulk(data, urb->transfer_buffer,
735 urb->actual_length) < 0) {
736 bt_dev_err(hdev, "corrupted ACL packet");
739 } else if (urb->status == -ENOENT) {
740 /* Avoid suspend failed when usb_kill_urb */
744 if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
747 usb_anchor_urb(urb, &data->bulk_anchor);
748 usb_mark_last_busy(data->udev);
750 err = usb_submit_urb(urb, GFP_ATOMIC);
752 /* -EPERM: urb is being killed;
753 * -ENODEV: device got disconnected
755 if (err != -EPERM && err != -ENODEV)
756 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
758 usb_unanchor_urb(urb);
762 static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
764 struct btusb_data *data = hci_get_drvdata(hdev);
768 int err, size = HCI_MAX_FRAME_SIZE;
770 BT_DBG("%s", hdev->name);
772 if (!data->bulk_rx_ep)
775 urb = usb_alloc_urb(0, mem_flags);
779 buf = kmalloc(size, mem_flags);
785 pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
787 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
788 btusb_bulk_complete, hdev);
790 urb->transfer_flags |= URB_FREE_BUFFER;
792 usb_mark_last_busy(data->udev);
793 usb_anchor_urb(urb, &data->bulk_anchor);
795 err = usb_submit_urb(urb, mem_flags);
797 if (err != -EPERM && err != -ENODEV)
798 bt_dev_err(hdev, "urb %p submission failed (%d)",
800 usb_unanchor_urb(urb);
808 static void btusb_isoc_complete(struct urb *urb)
810 struct hci_dev *hdev = urb->context;
811 struct btusb_data *data = hci_get_drvdata(hdev);
814 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
817 if (!test_bit(HCI_RUNNING, &hdev->flags))
820 if (urb->status == 0) {
821 for (i = 0; i < urb->number_of_packets; i++) {
822 unsigned int offset = urb->iso_frame_desc[i].offset;
823 unsigned int length = urb->iso_frame_desc[i].actual_length;
825 if (urb->iso_frame_desc[i].status)
828 hdev->stat.byte_rx += length;
830 if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
832 bt_dev_err(hdev, "corrupted SCO packet");
836 } else if (urb->status == -ENOENT) {
837 /* Avoid suspend failed when usb_kill_urb */
841 if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
844 usb_anchor_urb(urb, &data->isoc_anchor);
846 err = usb_submit_urb(urb, GFP_ATOMIC);
848 /* -EPERM: urb is being killed;
849 * -ENODEV: device got disconnected
851 if (err != -EPERM && err != -ENODEV)
852 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
854 usb_unanchor_urb(urb);
858 static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
862 BT_DBG("len %d mtu %d", len, mtu);
864 for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
865 i++, offset += mtu, len -= mtu) {
866 urb->iso_frame_desc[i].offset = offset;
867 urb->iso_frame_desc[i].length = mtu;
870 if (len && i < BTUSB_MAX_ISOC_FRAMES) {
871 urb->iso_frame_desc[i].offset = offset;
872 urb->iso_frame_desc[i].length = len;
876 urb->number_of_packets = i;
879 static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
881 struct btusb_data *data = hci_get_drvdata(hdev);
887 BT_DBG("%s", hdev->name);
889 if (!data->isoc_rx_ep)
892 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
896 size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
897 BTUSB_MAX_ISOC_FRAMES;
899 buf = kmalloc(size, mem_flags);
905 pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
907 usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
908 hdev, data->isoc_rx_ep->bInterval);
910 urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
912 __fill_isoc_descriptor(urb, size,
913 le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
915 usb_anchor_urb(urb, &data->isoc_anchor);
917 err = usb_submit_urb(urb, mem_flags);
919 if (err != -EPERM && err != -ENODEV)
920 bt_dev_err(hdev, "urb %p submission failed (%d)",
922 usb_unanchor_urb(urb);
930 static void btusb_diag_complete(struct urb *urb)
932 struct hci_dev *hdev = urb->context;
933 struct btusb_data *data = hci_get_drvdata(hdev);
936 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
939 if (urb->status == 0) {
942 skb = bt_skb_alloc(urb->actual_length, GFP_ATOMIC);
944 skb_put_data(skb, urb->transfer_buffer,
946 hci_recv_diag(hdev, skb);
948 } else if (urb->status == -ENOENT) {
949 /* Avoid suspend failed when usb_kill_urb */
953 if (!test_bit(BTUSB_DIAG_RUNNING, &data->flags))
956 usb_anchor_urb(urb, &data->diag_anchor);
957 usb_mark_last_busy(data->udev);
959 err = usb_submit_urb(urb, GFP_ATOMIC);
961 /* -EPERM: urb is being killed;
962 * -ENODEV: device got disconnected
964 if (err != -EPERM && err != -ENODEV)
965 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
967 usb_unanchor_urb(urb);
971 static int btusb_submit_diag_urb(struct hci_dev *hdev, gfp_t mem_flags)
973 struct btusb_data *data = hci_get_drvdata(hdev);
977 int err, size = HCI_MAX_FRAME_SIZE;
979 BT_DBG("%s", hdev->name);
981 if (!data->diag_rx_ep)
984 urb = usb_alloc_urb(0, mem_flags);
988 buf = kmalloc(size, mem_flags);
994 pipe = usb_rcvbulkpipe(data->udev, data->diag_rx_ep->bEndpointAddress);
996 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
997 btusb_diag_complete, hdev);
999 urb->transfer_flags |= URB_FREE_BUFFER;
1001 usb_mark_last_busy(data->udev);
1002 usb_anchor_urb(urb, &data->diag_anchor);
1004 err = usb_submit_urb(urb, mem_flags);
1006 if (err != -EPERM && err != -ENODEV)
1007 bt_dev_err(hdev, "urb %p submission failed (%d)",
1009 usb_unanchor_urb(urb);
1017 static void btusb_tx_complete(struct urb *urb)
1019 struct sk_buff *skb = urb->context;
1020 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
1021 struct btusb_data *data = hci_get_drvdata(hdev);
1023 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1024 urb->actual_length);
1026 if (!test_bit(HCI_RUNNING, &hdev->flags))
1030 hdev->stat.byte_tx += urb->transfer_buffer_length;
1032 hdev->stat.err_tx++;
1035 spin_lock(&data->txlock);
1036 data->tx_in_flight--;
1037 spin_unlock(&data->txlock);
1039 kfree(urb->setup_packet);
1044 static void btusb_isoc_tx_complete(struct urb *urb)
1046 struct sk_buff *skb = urb->context;
1047 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
1049 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1050 urb->actual_length);
1052 if (!test_bit(HCI_RUNNING, &hdev->flags))
1056 hdev->stat.byte_tx += urb->transfer_buffer_length;
1058 hdev->stat.err_tx++;
1061 kfree(urb->setup_packet);
1066 static int btusb_open(struct hci_dev *hdev)
1068 struct btusb_data *data = hci_get_drvdata(hdev);
1071 BT_DBG("%s", hdev->name);
1073 err = usb_autopm_get_interface(data->intf);
1077 /* Patching USB firmware files prior to starting any URBs of HCI path
1078 * It is more safe to use USB bulk channel for downloading USB patch
1080 if (data->setup_on_usb) {
1081 err = data->setup_on_usb(hdev);
1086 data->intf->needs_remote_wakeup = 1;
1087 /* device specific wakeup source enabled and required for USB
1088 * remote wakeup while host is suspended
1090 device_wakeup_enable(&data->udev->dev);
1092 if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
1095 err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
1099 err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1101 usb_kill_anchored_urbs(&data->intr_anchor);
1105 set_bit(BTUSB_BULK_RUNNING, &data->flags);
1106 btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1109 if (!btusb_submit_diag_urb(hdev, GFP_KERNEL))
1110 set_bit(BTUSB_DIAG_RUNNING, &data->flags);
1114 usb_autopm_put_interface(data->intf);
1118 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1119 usb_autopm_put_interface(data->intf);
1123 static void btusb_stop_traffic(struct btusb_data *data)
1125 usb_kill_anchored_urbs(&data->intr_anchor);
1126 usb_kill_anchored_urbs(&data->bulk_anchor);
1127 usb_kill_anchored_urbs(&data->isoc_anchor);
1128 usb_kill_anchored_urbs(&data->diag_anchor);
1131 static int btusb_close(struct hci_dev *hdev)
1133 struct btusb_data *data = hci_get_drvdata(hdev);
1136 BT_DBG("%s", hdev->name);
1138 cancel_work_sync(&data->work);
1139 cancel_work_sync(&data->waker);
1141 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1142 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
1143 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1144 clear_bit(BTUSB_DIAG_RUNNING, &data->flags);
1146 btusb_stop_traffic(data);
1147 btusb_free_frags(data);
1149 err = usb_autopm_get_interface(data->intf);
1153 data->intf->needs_remote_wakeup = 0;
1154 device_wakeup_disable(&data->udev->dev);
1155 usb_autopm_put_interface(data->intf);
1158 usb_scuttle_anchored_urbs(&data->deferred);
1162 static int btusb_flush(struct hci_dev *hdev)
1164 struct btusb_data *data = hci_get_drvdata(hdev);
1166 BT_DBG("%s", hdev->name);
1168 usb_kill_anchored_urbs(&data->tx_anchor);
1169 btusb_free_frags(data);
1174 static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
1176 struct btusb_data *data = hci_get_drvdata(hdev);
1177 struct usb_ctrlrequest *dr;
1181 urb = usb_alloc_urb(0, GFP_KERNEL);
1183 return ERR_PTR(-ENOMEM);
1185 dr = kmalloc(sizeof(*dr), GFP_KERNEL);
1188 return ERR_PTR(-ENOMEM);
1191 dr->bRequestType = data->cmdreq_type;
1192 dr->bRequest = data->cmdreq;
1195 dr->wLength = __cpu_to_le16(skb->len);
1197 pipe = usb_sndctrlpipe(data->udev, 0x00);
1199 usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
1200 skb->data, skb->len, btusb_tx_complete, skb);
1202 skb->dev = (void *)hdev;
1207 static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb)
1209 struct btusb_data *data = hci_get_drvdata(hdev);
1213 if (!data->bulk_tx_ep)
1214 return ERR_PTR(-ENODEV);
1216 urb = usb_alloc_urb(0, GFP_KERNEL);
1218 return ERR_PTR(-ENOMEM);
1220 pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
1222 usb_fill_bulk_urb(urb, data->udev, pipe,
1223 skb->data, skb->len, btusb_tx_complete, skb);
1225 skb->dev = (void *)hdev;
1230 static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
1232 struct btusb_data *data = hci_get_drvdata(hdev);
1236 if (!data->isoc_tx_ep)
1237 return ERR_PTR(-ENODEV);
1239 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
1241 return ERR_PTR(-ENOMEM);
1243 pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress);
1245 usb_fill_int_urb(urb, data->udev, pipe,
1246 skb->data, skb->len, btusb_isoc_tx_complete,
1247 skb, data->isoc_tx_ep->bInterval);
1249 urb->transfer_flags = URB_ISO_ASAP;
1251 __fill_isoc_descriptor(urb, skb->len,
1252 le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
1254 skb->dev = (void *)hdev;
1259 static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb)
1261 struct btusb_data *data = hci_get_drvdata(hdev);
1264 usb_anchor_urb(urb, &data->tx_anchor);
1266 err = usb_submit_urb(urb, GFP_KERNEL);
1268 if (err != -EPERM && err != -ENODEV)
1269 bt_dev_err(hdev, "urb %p submission failed (%d)",
1271 kfree(urb->setup_packet);
1272 usb_unanchor_urb(urb);
1274 usb_mark_last_busy(data->udev);
1281 static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb)
1283 struct btusb_data *data = hci_get_drvdata(hdev);
1284 unsigned long flags;
1287 spin_lock_irqsave(&data->txlock, flags);
1288 suspending = test_bit(BTUSB_SUSPENDING, &data->flags);
1290 data->tx_in_flight++;
1291 spin_unlock_irqrestore(&data->txlock, flags);
1294 return submit_tx_urb(hdev, urb);
1296 usb_anchor_urb(urb, &data->deferred);
1297 schedule_work(&data->waker);
1303 static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
1307 BT_DBG("%s", hdev->name);
1309 switch (hci_skb_pkt_type(skb)) {
1310 case HCI_COMMAND_PKT:
1311 urb = alloc_ctrl_urb(hdev, skb);
1313 return PTR_ERR(urb);
1315 hdev->stat.cmd_tx++;
1316 return submit_or_queue_tx_urb(hdev, urb);
1318 case HCI_ACLDATA_PKT:
1319 urb = alloc_bulk_urb(hdev, skb);
1321 return PTR_ERR(urb);
1323 hdev->stat.acl_tx++;
1324 return submit_or_queue_tx_urb(hdev, urb);
1326 case HCI_SCODATA_PKT:
1327 if (hci_conn_num(hdev, SCO_LINK) < 1)
1330 urb = alloc_isoc_urb(hdev, skb);
1332 return PTR_ERR(urb);
1334 hdev->stat.sco_tx++;
1335 return submit_tx_urb(hdev, urb);
1341 static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
1343 struct btusb_data *data = hci_get_drvdata(hdev);
1345 BT_DBG("%s evt %d", hdev->name, evt);
1347 if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
1348 data->sco_num = hci_conn_num(hdev, SCO_LINK);
1349 schedule_work(&data->work);
1353 static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
1355 struct btusb_data *data = hci_get_drvdata(hdev);
1356 struct usb_interface *intf = data->isoc;
1357 struct usb_endpoint_descriptor *ep_desc;
1363 err = usb_set_interface(data->udev, 1, altsetting);
1365 bt_dev_err(hdev, "setting interface failed (%d)", -err);
1369 data->isoc_altsetting = altsetting;
1371 data->isoc_tx_ep = NULL;
1372 data->isoc_rx_ep = NULL;
1374 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
1375 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
1377 if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
1378 data->isoc_tx_ep = ep_desc;
1382 if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
1383 data->isoc_rx_ep = ep_desc;
1388 if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
1389 bt_dev_err(hdev, "invalid SCO descriptors");
1396 static void btusb_work(struct work_struct *work)
1398 struct btusb_data *data = container_of(work, struct btusb_data, work);
1399 struct hci_dev *hdev = data->hdev;
1403 if (data->sco_num > 0) {
1404 if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
1405 err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
1407 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1408 usb_kill_anchored_urbs(&data->isoc_anchor);
1412 set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
1415 if (hdev->voice_setting & 0x0020) {
1416 static const int alts[3] = { 2, 4, 5 };
1418 new_alts = alts[data->sco_num - 1];
1420 new_alts = data->sco_num;
1423 if (data->isoc_altsetting != new_alts) {
1424 unsigned long flags;
1426 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1427 usb_kill_anchored_urbs(&data->isoc_anchor);
1429 /* When isochronous alternate setting needs to be
1430 * changed, because SCO connection has been added
1431 * or removed, a packet fragment may be left in the
1432 * reassembling state. This could lead to wrongly
1433 * assembled fragments.
1435 * Clear outstanding fragment when selecting a new
1436 * alternate setting.
1438 spin_lock_irqsave(&data->rxlock, flags);
1439 kfree_skb(data->sco_skb);
1440 data->sco_skb = NULL;
1441 spin_unlock_irqrestore(&data->rxlock, flags);
1443 if (__set_isoc_interface(hdev, new_alts) < 0)
1447 if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
1448 if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
1449 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1451 btusb_submit_isoc_urb(hdev, GFP_KERNEL);
1454 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1455 usb_kill_anchored_urbs(&data->isoc_anchor);
1457 __set_isoc_interface(hdev, 0);
1458 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
1459 usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
1463 static void btusb_waker(struct work_struct *work)
1465 struct btusb_data *data = container_of(work, struct btusb_data, waker);
1468 err = usb_autopm_get_interface(data->intf);
1472 usb_autopm_put_interface(data->intf);
1475 static int btusb_setup_bcm92035(struct hci_dev *hdev)
1477 struct sk_buff *skb;
1480 BT_DBG("%s", hdev->name);
1482 skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
1484 bt_dev_err(hdev, "BCM92035 command failed (%ld)", PTR_ERR(skb));
1491 static int btusb_setup_csr(struct hci_dev *hdev)
1493 struct hci_rp_read_local_version *rp;
1494 struct sk_buff *skb;
1496 BT_DBG("%s", hdev->name);
1498 skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
1501 int err = PTR_ERR(skb);
1502 bt_dev_err(hdev, "CSR: Local version failed (%d)", err);
1506 if (skb->len != sizeof(struct hci_rp_read_local_version)) {
1507 bt_dev_err(hdev, "CSR: Local version length mismatch");
1512 rp = (struct hci_rp_read_local_version *)skb->data;
1514 /* Detect controllers which aren't real CSR ones. */
1515 if (le16_to_cpu(rp->manufacturer) != 10 ||
1516 le16_to_cpu(rp->lmp_subver) == 0x0c5c) {
1517 /* Clear the reset quirk since this is not an actual
1518 * early Bluetooth 1.1 device from CSR.
1520 clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
1522 /* These fake CSR controllers have all a broken
1523 * stored link key handling and so just disable it.
1525 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
1533 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
1534 struct intel_version *ver)
1536 const struct firmware *fw;
1540 snprintf(fwname, sizeof(fwname),
1541 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1542 ver->hw_platform, ver->hw_variant, ver->hw_revision,
1543 ver->fw_variant, ver->fw_revision, ver->fw_build_num,
1544 ver->fw_build_ww, ver->fw_build_yy);
1546 ret = request_firmware(&fw, fwname, &hdev->dev);
1548 if (ret == -EINVAL) {
1549 BT_ERR("%s Intel firmware file request failed (%d)",
1554 BT_ERR("%s failed to open Intel firmware file: %s(%d)",
1555 hdev->name, fwname, ret);
1557 /* If the correct firmware patch file is not found, use the
1558 * default firmware patch file instead
1560 snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
1561 ver->hw_platform, ver->hw_variant);
1562 if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
1563 BT_ERR("%s failed to open default Intel fw file: %s",
1564 hdev->name, fwname);
1569 bt_dev_info(hdev, "Intel Bluetooth firmware file: %s", fwname);
1574 static int btusb_setup_intel_patching(struct hci_dev *hdev,
1575 const struct firmware *fw,
1576 const u8 **fw_ptr, int *disable_patch)
1578 struct sk_buff *skb;
1579 struct hci_command_hdr *cmd;
1580 const u8 *cmd_param;
1581 struct hci_event_hdr *evt = NULL;
1582 const u8 *evt_param = NULL;
1583 int remain = fw->size - (*fw_ptr - fw->data);
1585 /* The first byte indicates the types of the patch command or event.
1586 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1587 * in the current firmware buffer doesn't start with 0x01 or
1588 * the size of remain buffer is smaller than HCI command header,
1589 * the firmware file is corrupted and it should stop the patching
1592 if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
1593 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name);
1599 cmd = (struct hci_command_hdr *)(*fw_ptr);
1600 *fw_ptr += sizeof(*cmd);
1601 remain -= sizeof(*cmd);
1603 /* Ensure that the remain firmware data is long enough than the length
1604 * of command parameter. If not, the firmware file is corrupted.
1606 if (remain < cmd->plen) {
1607 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name);
1611 /* If there is a command that loads a patch in the firmware
1612 * file, then enable the patch upon success, otherwise just
1613 * disable the manufacturer mode, for example patch activation
1614 * is not required when the default firmware patch file is used
1615 * because there are no patch data to load.
1617 if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
1620 cmd_param = *fw_ptr;
1621 *fw_ptr += cmd->plen;
1622 remain -= cmd->plen;
1624 /* This reads the expected events when the above command is sent to the
1625 * device. Some vendor commands expects more than one events, for
1626 * example command status event followed by vendor specific event.
1627 * For this case, it only keeps the last expected event. so the command
1628 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1629 * last expected event.
1631 while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
1635 evt = (struct hci_event_hdr *)(*fw_ptr);
1636 *fw_ptr += sizeof(*evt);
1637 remain -= sizeof(*evt);
1639 if (remain < evt->plen) {
1640 BT_ERR("%s Intel fw corrupted: invalid evt len",
1645 evt_param = *fw_ptr;
1646 *fw_ptr += evt->plen;
1647 remain -= evt->plen;
1650 /* Every HCI commands in the firmware file has its correspond event.
1651 * If event is not found or remain is smaller than zero, the firmware
1652 * file is corrupted.
1654 if (!evt || !evt_param || remain < 0) {
1655 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name);
1659 skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
1660 cmd_param, evt->evt, HCI_INIT_TIMEOUT);
1662 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
1663 hdev->name, cmd->opcode, PTR_ERR(skb));
1664 return PTR_ERR(skb);
1667 /* It ensures that the returned event matches the event data read from
1668 * the firmware file. At fist, it checks the length and then
1669 * the contents of the event.
1671 if (skb->len != evt->plen) {
1672 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name,
1673 le16_to_cpu(cmd->opcode));
1678 if (memcmp(skb->data, evt_param, evt->plen)) {
1679 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
1680 hdev->name, le16_to_cpu(cmd->opcode));
1689 static int btusb_setup_intel(struct hci_dev *hdev)
1691 struct sk_buff *skb;
1692 const struct firmware *fw;
1694 int disable_patch, err;
1695 struct intel_version ver;
1697 BT_DBG("%s", hdev->name);
1699 /* The controller has a bug with the first HCI command sent to it
1700 * returning number of completed commands as zero. This would stall the
1701 * command processing in the Bluetooth core.
1703 * As a workaround, send HCI Reset command first which will reset the
1704 * number of completed commands and allow normal command processing
1707 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
1709 BT_ERR("%s sending initial HCI reset command failed (%ld)",
1710 hdev->name, PTR_ERR(skb));
1711 return PTR_ERR(skb);
1715 /* Read Intel specific controller version first to allow selection of
1716 * which firmware file to load.
1718 * The returned information are hardware variant and revision plus
1719 * firmware variant, revision and build number.
1721 err = btintel_read_version(hdev, &ver);
1725 bt_dev_info(hdev, "read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
1726 ver.hw_platform, ver.hw_variant, ver.hw_revision,
1727 ver.fw_variant, ver.fw_revision, ver.fw_build_num,
1728 ver.fw_build_ww, ver.fw_build_yy, ver.fw_patch_num);
1730 /* fw_patch_num indicates the version of patch the device currently
1731 * have. If there is no patch data in the device, it is always 0x00.
1732 * So, if it is other than 0x00, no need to patch the device again.
1734 if (ver.fw_patch_num) {
1735 bt_dev_info(hdev, "Intel device is already patched. "
1736 "patch num: %02x", ver.fw_patch_num);
1740 /* Opens the firmware patch file based on the firmware version read
1741 * from the controller. If it fails to open the matching firmware
1742 * patch file, it tries to open the default firmware patch file.
1743 * If no patch file is found, allow the device to operate without
1746 fw = btusb_setup_intel_get_fw(hdev, &ver);
1751 /* Enable the manufacturer mode of the controller.
1752 * Only while this mode is enabled, the driver can download the
1753 * firmware patch data and configuration parameters.
1755 err = btintel_enter_mfg(hdev);
1757 release_firmware(fw);
1763 /* The firmware data file consists of list of Intel specific HCI
1764 * commands and its expected events. The first byte indicates the
1765 * type of the message, either HCI command or HCI event.
1767 * It reads the command and its expected event from the firmware file,
1768 * and send to the controller. Once __hci_cmd_sync_ev() returns,
1769 * the returned event is compared with the event read from the firmware
1770 * file and it will continue until all the messages are downloaded to
1773 * Once the firmware patching is completed successfully,
1774 * the manufacturer mode is disabled with reset and activating the
1777 * If the firmware patching fails, the manufacturer mode is
1778 * disabled with reset and deactivating the patch.
1780 * If the default patch file is used, no reset is done when disabling
1783 while (fw->size > fw_ptr - fw->data) {
1786 ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
1789 goto exit_mfg_deactivate;
1792 release_firmware(fw);
1795 goto exit_mfg_disable;
1797 /* Patching completed successfully and disable the manufacturer mode
1798 * with reset and activate the downloaded firmware patches.
1800 err = btintel_exit_mfg(hdev, true, true);
1804 bt_dev_info(hdev, "Intel firmware patch completed and activated");
1809 /* Disable the manufacturer mode without reset */
1810 err = btintel_exit_mfg(hdev, false, false);
1814 bt_dev_info(hdev, "Intel firmware patch completed");
1818 exit_mfg_deactivate:
1819 release_firmware(fw);
1821 /* Patching failed. Disable the manufacturer mode with reset and
1822 * deactivate the downloaded firmware patches.
1824 err = btintel_exit_mfg(hdev, true, false);
1828 bt_dev_info(hdev, "Intel firmware patch completed and deactivated");
1831 /* Set the event mask for Intel specific vendor events. This enables
1832 * a few extra events that are useful during general operation.
1834 btintel_set_event_mask_mfg(hdev, false);
1836 btintel_check_bdaddr(hdev);
1840 static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
1842 struct sk_buff *skb;
1843 struct hci_event_hdr *hdr;
1844 struct hci_ev_cmd_complete *evt;
1846 skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
1850 hdr = skb_put(skb, sizeof(*hdr));
1851 hdr->evt = HCI_EV_CMD_COMPLETE;
1852 hdr->plen = sizeof(*evt) + 1;
1854 evt = skb_put(skb, sizeof(*evt));
1856 evt->opcode = cpu_to_le16(opcode);
1858 skb_put_u8(skb, 0x00);
1860 hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
1862 return hci_recv_frame(hdev, skb);
1865 static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
1868 /* When the device is in bootloader mode, then it can send
1869 * events via the bulk endpoint. These events are treated the
1870 * same way as the ones received from the interrupt endpoint.
1872 if (test_bit(BTUSB_BOOTLOADER, &data->flags))
1873 return btusb_recv_intr(data, buffer, count);
1875 return btusb_recv_bulk(data, buffer, count);
1878 static void btusb_intel_bootup(struct btusb_data *data, const void *ptr,
1881 const struct intel_bootup *evt = ptr;
1883 if (len != sizeof(*evt))
1886 if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
1887 smp_mb__after_atomic();
1888 wake_up_bit(&data->flags, BTUSB_BOOTING);
1892 static void btusb_intel_secure_send_result(struct btusb_data *data,
1893 const void *ptr, unsigned int len)
1895 const struct intel_secure_send_result *evt = ptr;
1897 if (len != sizeof(*evt))
1901 set_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
1903 if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) &&
1904 test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
1905 smp_mb__after_atomic();
1906 wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
1910 static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
1912 struct btusb_data *data = hci_get_drvdata(hdev);
1914 if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
1915 struct hci_event_hdr *hdr = (void *)skb->data;
1917 if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
1919 const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
1920 unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
1922 switch (skb->data[2]) {
1924 /* When switching to the operational firmware
1925 * the device sends a vendor specific event
1926 * indicating that the bootup completed.
1928 btusb_intel_bootup(data, ptr, len);
1931 /* When the firmware loading completes the
1932 * device sends out a vendor specific event
1933 * indicating the result of the firmware
1936 btusb_intel_secure_send_result(data, ptr, len);
1942 return hci_recv_frame(hdev, skb);
1945 static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
1947 struct btusb_data *data = hci_get_drvdata(hdev);
1950 BT_DBG("%s", hdev->name);
1952 switch (hci_skb_pkt_type(skb)) {
1953 case HCI_COMMAND_PKT:
1954 if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
1955 struct hci_command_hdr *cmd = (void *)skb->data;
1956 __u16 opcode = le16_to_cpu(cmd->opcode);
1958 /* When in bootloader mode and the command 0xfc09
1959 * is received, it needs to be send down the
1960 * bulk endpoint. So allocate a bulk URB instead.
1962 if (opcode == 0xfc09)
1963 urb = alloc_bulk_urb(hdev, skb);
1965 urb = alloc_ctrl_urb(hdev, skb);
1967 /* When the 0xfc01 command is issued to boot into
1968 * the operational firmware, it will actually not
1969 * send a command complete event. To keep the flow
1970 * control working inject that event here.
1972 if (opcode == 0xfc01)
1973 inject_cmd_complete(hdev, opcode);
1975 urb = alloc_ctrl_urb(hdev, skb);
1978 return PTR_ERR(urb);
1980 hdev->stat.cmd_tx++;
1981 return submit_or_queue_tx_urb(hdev, urb);
1983 case HCI_ACLDATA_PKT:
1984 urb = alloc_bulk_urb(hdev, skb);
1986 return PTR_ERR(urb);
1988 hdev->stat.acl_tx++;
1989 return submit_or_queue_tx_urb(hdev, urb);
1991 case HCI_SCODATA_PKT:
1992 if (hci_conn_num(hdev, SCO_LINK) < 1)
1995 urb = alloc_isoc_urb(hdev, skb);
1997 return PTR_ERR(urb);
1999 hdev->stat.sco_tx++;
2000 return submit_tx_urb(hdev, urb);
2006 static int btusb_setup_intel_new(struct hci_dev *hdev)
2008 static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
2009 0x00, 0x08, 0x04, 0x00 };
2010 struct btusb_data *data = hci_get_drvdata(hdev);
2011 struct sk_buff *skb;
2012 struct intel_version ver;
2013 struct intel_boot_params *params;
2014 const struct firmware *fw;
2018 ktime_t calltime, delta, rettime;
2019 unsigned long long duration;
2022 BT_DBG("%s", hdev->name);
2024 calltime = ktime_get();
2026 /* Read the Intel version information to determine if the device
2027 * is in bootloader mode or if it already has operational firmware
2030 err = btintel_read_version(hdev, &ver);
2034 /* The hardware platform number has a fixed value of 0x37 and
2035 * for now only accept this single value.
2037 if (ver.hw_platform != 0x37) {
2038 BT_ERR("%s: Unsupported Intel hardware platform (%u)",
2039 hdev->name, ver.hw_platform);
2043 /* Check for supported iBT hardware variants of this firmware
2046 * This check has been put in place to ensure correct forward
2047 * compatibility options when newer hardware variants come along.
2049 switch (ver.hw_variant) {
2050 case 0x0b: /* SfP */
2051 case 0x0c: /* WsP */
2052 case 0x11: /* JfP */
2053 case 0x12: /* ThP */
2056 BT_ERR("%s: Unsupported Intel hardware variant (%u)",
2057 hdev->name, ver.hw_variant);
2061 btintel_version_info(hdev, &ver);
2063 /* The firmware variant determines if the device is in bootloader
2064 * mode or is running operational firmware. The value 0x06 identifies
2065 * the bootloader and the value 0x23 identifies the operational
2068 * When the operational firmware is already present, then only
2069 * the check for valid Bluetooth device address is needed. This
2070 * determines if the device will be added as configured or
2071 * unconfigured controller.
2073 * It is not possible to use the Secure Boot Parameters in this
2074 * case since that command is only available in bootloader mode.
2076 if (ver.fw_variant == 0x23) {
2077 clear_bit(BTUSB_BOOTLOADER, &data->flags);
2078 btintel_check_bdaddr(hdev);
2082 /* If the device is not in bootloader mode, then the only possible
2083 * choice is to return an error and abort the device initialization.
2085 if (ver.fw_variant != 0x06) {
2086 BT_ERR("%s: Unsupported Intel firmware variant (%u)",
2087 hdev->name, ver.fw_variant);
2091 /* Read the secure boot parameters to identify the operating
2092 * details of the bootloader.
2094 skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
2096 BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
2097 hdev->name, PTR_ERR(skb));
2098 return PTR_ERR(skb);
2101 if (skb->len != sizeof(*params)) {
2102 BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
2107 params = (struct intel_boot_params *)skb->data;
2109 bt_dev_info(hdev, "Device revision is %u",
2110 le16_to_cpu(params->dev_revid));
2112 bt_dev_info(hdev, "Secure boot is %s",
2113 params->secure_boot ? "enabled" : "disabled");
2115 bt_dev_info(hdev, "OTP lock is %s",
2116 params->otp_lock ? "enabled" : "disabled");
2118 bt_dev_info(hdev, "API lock is %s",
2119 params->api_lock ? "enabled" : "disabled");
2121 bt_dev_info(hdev, "Debug lock is %s",
2122 params->debug_lock ? "enabled" : "disabled");
2124 bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
2125 params->min_fw_build_nn, params->min_fw_build_cw,
2126 2000 + params->min_fw_build_yy);
2128 /* It is required that every single firmware fragment is acknowledged
2129 * with a command complete event. If the boot parameters indicate
2130 * that this bootloader does not send them, then abort the setup.
2132 if (params->limited_cce != 0x00) {
2133 BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
2134 hdev->name, params->limited_cce);
2139 /* If the OTP has no valid Bluetooth device address, then there will
2140 * also be no valid address for the operational firmware.
2142 if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) {
2143 bt_dev_info(hdev, "No device address configured");
2144 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
2147 /* With this Intel bootloader only the hardware variant and device
2148 * revision information are used to select the right firmware for SfP
2151 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
2153 * Currently the supported hardware variants are:
2154 * 11 (0x0b) for iBT3.0 (LnP/SfP)
2155 * 12 (0x0c) for iBT3.5 (WsP)
2157 * For ThP/JfP and for future SKU's, the FW name varies based on HW
2158 * variant, HW revision and FW revision, as these are dependent on CNVi
2159 * and RF Combination.
2161 * 17 (0x11) for iBT3.5 (JfP)
2162 * 18 (0x12) for iBT3.5 (ThP)
2164 * The firmware file name for these will be
2165 * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
2168 switch (ver.hw_variant) {
2169 case 0x0b: /* SfP */
2170 case 0x0c: /* WsP */
2171 snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
2172 le16_to_cpu(ver.hw_variant),
2173 le16_to_cpu(params->dev_revid));
2175 case 0x11: /* JfP */
2176 case 0x12: /* ThP */
2177 snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.sfi",
2178 le16_to_cpu(ver.hw_variant),
2179 le16_to_cpu(ver.hw_revision),
2180 le16_to_cpu(ver.fw_revision));
2183 BT_ERR("%s: Unsupported Intel firmware naming", hdev->name);
2187 err = request_firmware(&fw, fwname, &hdev->dev);
2189 BT_ERR("%s: Failed to load Intel firmware file (%d)",
2195 bt_dev_info(hdev, "Found device firmware: %s", fwname);
2197 /* Save the DDC file name for later use to apply once the firmware
2198 * downloading is done.
2200 switch (ver.hw_variant) {
2201 case 0x0b: /* SfP */
2202 case 0x0c: /* WsP */
2203 snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
2204 le16_to_cpu(ver.hw_variant),
2205 le16_to_cpu(params->dev_revid));
2207 case 0x11: /* JfP */
2208 case 0x12: /* ThP */
2209 snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.ddc",
2210 le16_to_cpu(ver.hw_variant),
2211 le16_to_cpu(ver.hw_revision),
2212 le16_to_cpu(ver.fw_revision));
2215 BT_ERR("%s: Unsupported Intel firmware naming", hdev->name);
2221 if (fw->size < 644) {
2222 BT_ERR("%s: Invalid size of firmware file (%zu)",
2223 hdev->name, fw->size);
2228 set_bit(BTUSB_DOWNLOADING, &data->flags);
2230 /* Start the firmware download transaction with the Init fragment
2231 * represented by the 128 bytes of CSS header.
2233 err = btintel_secure_send(hdev, 0x00, 128, fw->data);
2235 BT_ERR("%s: Failed to send firmware header (%d)",
2240 /* Send the 256 bytes of public key information from the firmware
2241 * as the PKey fragment.
2243 err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
2245 BT_ERR("%s: Failed to send firmware public key (%d)",
2250 /* Send the 256 bytes of signature information from the firmware
2251 * as the Sign fragment.
2253 err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
2255 BT_ERR("%s: Failed to send firmware signature (%d)",
2260 fw_ptr = fw->data + 644;
2263 while (fw_ptr - fw->data < fw->size) {
2264 struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
2266 frag_len += sizeof(*cmd) + cmd->plen;
2268 /* The parameter length of the secure send command requires
2269 * a 4 byte alignment. It happens so that the firmware file
2270 * contains proper Intel_NOP commands to align the fragments
2273 * Send set of commands with 4 byte alignment from the
2274 * firmware data buffer as a single Data fragement.
2276 if (!(frag_len % 4)) {
2277 err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
2279 BT_ERR("%s: Failed to send firmware data (%d)",
2289 set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
2291 bt_dev_info(hdev, "Waiting for firmware download to complete");
2293 /* Before switching the device into operational mode and with that
2294 * booting the loaded firmware, wait for the bootloader notification
2295 * that all fragments have been successfully received.
2297 * When the event processing receives the notification, then the
2298 * BTUSB_DOWNLOADING flag will be cleared.
2300 * The firmware loading should not take longer than 5 seconds
2301 * and thus just timeout if that happens and fail the setup
2304 err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
2306 msecs_to_jiffies(5000));
2307 if (err == -EINTR) {
2308 BT_ERR("%s: Firmware loading interrupted", hdev->name);
2313 BT_ERR("%s: Firmware loading timeout", hdev->name);
2318 if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
2319 BT_ERR("%s: Firmware loading failed", hdev->name);
2324 rettime = ktime_get();
2325 delta = ktime_sub(rettime, calltime);
2326 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2328 bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
2331 release_firmware(fw);
2336 calltime = ktime_get();
2338 set_bit(BTUSB_BOOTING, &data->flags);
2340 skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
2343 return PTR_ERR(skb);
2347 /* The bootloader will not indicate when the device is ready. This
2348 * is done by the operational firmware sending bootup notification.
2350 * Booting into operational firmware should not take longer than
2351 * 1 second. However if that happens, then just fail the setup
2352 * since something went wrong.
2354 bt_dev_info(hdev, "Waiting for device to boot");
2356 err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
2358 msecs_to_jiffies(1000));
2360 if (err == -EINTR) {
2361 BT_ERR("%s: Device boot interrupted", hdev->name);
2366 BT_ERR("%s: Device boot timeout", hdev->name);
2370 rettime = ktime_get();
2371 delta = ktime_sub(rettime, calltime);
2372 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2374 bt_dev_info(hdev, "Device booted in %llu usecs", duration);
2376 clear_bit(BTUSB_BOOTLOADER, &data->flags);
2378 /* Once the device is running in operational mode, it needs to apply
2379 * the device configuration (DDC) parameters.
2381 * The device can work without DDC parameters, so even if it fails
2382 * to load the file, no need to fail the setup.
2384 btintel_load_ddc_config(hdev, fwname);
2386 /* Set the event mask for Intel specific vendor events. This enables
2387 * a few extra events that are useful during general operation. It
2388 * does not enable any debugging related events.
2390 * The device will function correctly without these events enabled
2391 * and thus no need to fail the setup.
2393 btintel_set_event_mask(hdev, false);
2398 static int btusb_shutdown_intel(struct hci_dev *hdev)
2400 struct sk_buff *skb;
2403 /* Some platforms have an issue with BT LED when the interface is
2404 * down or BT radio is turned off, which takes 5 seconds to BT LED
2405 * goes off. This command turns off the BT LED immediately.
2407 skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
2410 BT_ERR("%s: turning off Intel device LED failed (%ld)",
2420 /* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
2421 static int marvell_config_oob_wake(struct hci_dev *hdev)
2423 struct sk_buff *skb;
2424 struct btusb_data *data = hci_get_drvdata(hdev);
2425 struct device *dev = &data->udev->dev;
2426 u16 pin, gap, opcode;
2430 /* Move on if no wakeup pin specified */
2431 if (of_property_read_u16(dev->of_node, "marvell,wakeup-pin", &pin) ||
2432 of_property_read_u16(dev->of_node, "marvell,wakeup-gap-ms", &gap))
2435 /* Vendor specific command to configure a GPIO as wake-up pin */
2436 opcode = hci_opcode_pack(0x3F, 0x59);
2437 cmd[0] = opcode & 0xFF;
2438 cmd[1] = opcode >> 8;
2439 cmd[2] = 2; /* length of parameters that follow */
2441 cmd[4] = gap; /* time in ms, for which wakeup pin should be asserted */
2443 skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
2445 bt_dev_err(hdev, "%s: No memory\n", __func__);
2449 skb_put_data(skb, cmd, sizeof(cmd));
2450 hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
2452 ret = btusb_send_frame(hdev, skb);
2454 bt_dev_err(hdev, "%s: configuration failed\n", __func__);
2463 static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
2464 const bdaddr_t *bdaddr)
2466 struct sk_buff *skb;
2471 buf[1] = sizeof(bdaddr_t);
2472 memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
2474 skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
2477 bt_dev_err(hdev, "changing Marvell device address failed (%ld)",
2486 static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
2487 const bdaddr_t *bdaddr)
2489 struct sk_buff *skb;
2496 buf[3] = sizeof(bdaddr_t);
2497 memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
2499 skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
2502 bt_dev_err(hdev, "Change address command failed (%ld)", ret);
2510 #define QCA_DFU_PACKET_LEN 4096
2512 #define QCA_GET_TARGET_VERSION 0x09
2513 #define QCA_CHECK_STATUS 0x05
2514 #define QCA_DFU_DOWNLOAD 0x01
2516 #define QCA_SYSCFG_UPDATED 0x40
2517 #define QCA_PATCH_UPDATED 0x80
2518 #define QCA_DFU_TIMEOUT 3000
2520 struct qca_version {
2522 __le32 patch_version;
2528 struct qca_rampatch_version {
2530 __le16 patch_version;
2533 struct qca_device_info {
2535 u8 rampatch_hdr; /* length of header in rampatch */
2536 u8 nvm_hdr; /* length of header in NVM */
2537 u8 ver_offset; /* offset of version structure in rampatch */
2540 static const struct qca_device_info qca_devices_table[] = {
2541 { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
2542 { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
2543 { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
2544 { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
2545 { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
2546 { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
2549 static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request,
2550 void *data, u16 size)
2552 struct btusb_data *btdata = hci_get_drvdata(hdev);
2553 struct usb_device *udev = btdata->udev;
2557 buf = kmalloc(size, GFP_KERNEL);
2561 /* Found some of USB hosts have IOT issues with ours so that we should
2562 * not wait until HCI layer is ready.
2564 pipe = usb_rcvctrlpipe(udev, 0);
2565 err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
2566 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
2568 bt_dev_err(hdev, "Failed to access otp area (%d)", err);
2572 memcpy(data, buf, size);
2580 static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
2581 const struct firmware *firmware,
2584 struct btusb_data *btdata = hci_get_drvdata(hdev);
2585 struct usb_device *udev = btdata->udev;
2586 size_t count, size, sent = 0;
2590 buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
2594 count = firmware->size;
2596 size = min_t(size_t, count, hdr_size);
2597 memcpy(buf, firmware->data, size);
2599 /* USB patches should go down to controller through USB path
2600 * because binary format fits to go down through USB channel.
2601 * USB control path is for patching headers and USB bulk is for
2604 pipe = usb_sndctrlpipe(udev, 0);
2605 err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
2606 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
2608 bt_dev_err(hdev, "Failed to send headers (%d)", err);
2616 size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
2618 memcpy(buf, firmware->data + sent, size);
2620 pipe = usb_sndbulkpipe(udev, 0x02);
2621 err = usb_bulk_msg(udev, pipe, buf, size, &len,
2624 bt_dev_err(hdev, "Failed to send body at %zd of %zd (%d)",
2625 sent, firmware->size, err);
2630 bt_dev_err(hdev, "Failed to get bulk buffer");
2644 static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
2645 struct qca_version *ver,
2646 const struct qca_device_info *info)
2648 struct qca_rampatch_version *rver;
2649 const struct firmware *fw;
2650 u32 ver_rom, ver_patch;
2651 u16 rver_rom, rver_patch;
2655 ver_rom = le32_to_cpu(ver->rom_version);
2656 ver_patch = le32_to_cpu(ver->patch_version);
2658 snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);
2660 err = request_firmware(&fw, fwname, &hdev->dev);
2662 bt_dev_err(hdev, "failed to request rampatch file: %s (%d)",
2667 bt_dev_info(hdev, "using rampatch file: %s", fwname);
2669 rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
2670 rver_rom = le16_to_cpu(rver->rom_version);
2671 rver_patch = le16_to_cpu(rver->patch_version);
2673 bt_dev_info(hdev, "QCA: patch rome 0x%x build 0x%x, "
2674 "firmware rome 0x%x build 0x%x",
2675 rver_rom, rver_patch, ver_rom, ver_patch);
2677 if (rver_rom != ver_rom || rver_patch <= ver_patch) {
2678 bt_dev_err(hdev, "rampatch file version did not match with firmware");
2683 err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
2686 release_firmware(fw);
2691 static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
2692 struct qca_version *ver,
2693 const struct qca_device_info *info)
2695 const struct firmware *fw;
2699 snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
2700 le32_to_cpu(ver->rom_version));
2702 err = request_firmware(&fw, fwname, &hdev->dev);
2704 bt_dev_err(hdev, "failed to request NVM file: %s (%d)",
2709 bt_dev_info(hdev, "using NVM file: %s", fwname);
2711 err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
2713 release_firmware(fw);
2718 static int btusb_setup_qca(struct hci_dev *hdev)
2720 const struct qca_device_info *info = NULL;
2721 struct qca_version ver;
2726 err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver,
2731 ver_rom = le32_to_cpu(ver.rom_version);
2732 for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
2733 if (ver_rom == qca_devices_table[i].rom_version)
2734 info = &qca_devices_table[i];
2737 bt_dev_err(hdev, "don't support firmware rome 0x%x", ver_rom);
2741 err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status,
2746 if (!(status & QCA_PATCH_UPDATED)) {
2747 err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
2752 if (!(status & QCA_SYSCFG_UPDATED)) {
2753 err = btusb_setup_qca_load_nvm(hdev, &ver, info);
2761 #ifdef CONFIG_BT_HCIBTUSB_BCM
2762 static inline int __set_diag_interface(struct hci_dev *hdev)
2764 struct btusb_data *data = hci_get_drvdata(hdev);
2765 struct usb_interface *intf = data->diag;
2771 data->diag_tx_ep = NULL;
2772 data->diag_rx_ep = NULL;
2774 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
2775 struct usb_endpoint_descriptor *ep_desc;
2777 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
2779 if (!data->diag_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
2780 data->diag_tx_ep = ep_desc;
2784 if (!data->diag_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
2785 data->diag_rx_ep = ep_desc;
2790 if (!data->diag_tx_ep || !data->diag_rx_ep) {
2791 bt_dev_err(hdev, "invalid diagnostic descriptors");
2798 static struct urb *alloc_diag_urb(struct hci_dev *hdev, bool enable)
2800 struct btusb_data *data = hci_get_drvdata(hdev);
2801 struct sk_buff *skb;
2805 if (!data->diag_tx_ep)
2806 return ERR_PTR(-ENODEV);
2808 urb = usb_alloc_urb(0, GFP_KERNEL);
2810 return ERR_PTR(-ENOMEM);
2812 skb = bt_skb_alloc(2, GFP_KERNEL);
2815 return ERR_PTR(-ENOMEM);
2818 skb_put_u8(skb, 0xf0);
2819 skb_put_u8(skb, enable);
2821 pipe = usb_sndbulkpipe(data->udev, data->diag_tx_ep->bEndpointAddress);
2823 usb_fill_bulk_urb(urb, data->udev, pipe,
2824 skb->data, skb->len, btusb_tx_complete, skb);
2826 skb->dev = (void *)hdev;
2831 static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
2833 struct btusb_data *data = hci_get_drvdata(hdev);
2839 if (!test_bit(HCI_RUNNING, &hdev->flags))
2842 urb = alloc_diag_urb(hdev, enable);
2844 return PTR_ERR(urb);
2846 return submit_or_queue_tx_urb(hdev, urb);
2851 static irqreturn_t btusb_oob_wake_handler(int irq, void *priv)
2853 struct btusb_data *data = priv;
2855 pm_wakeup_event(&data->udev->dev, 0);
2858 /* Disable only if not already disabled (keep it balanced) */
2859 if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
2860 disable_irq_nosync(irq);
2861 disable_irq_wake(irq);
2866 static const struct of_device_id btusb_match_table[] = {
2867 { .compatible = "usb1286,204e" },
2870 MODULE_DEVICE_TABLE(of, btusb_match_table);
2872 /* Use an oob wakeup pin? */
2873 static int btusb_config_oob_wake(struct hci_dev *hdev)
2875 struct btusb_data *data = hci_get_drvdata(hdev);
2876 struct device *dev = &data->udev->dev;
2879 clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
2881 if (!of_match_device(btusb_match_table, dev))
2884 /* Move on if no IRQ specified */
2885 irq = of_irq_get_byname(dev->of_node, "wakeup");
2887 bt_dev_dbg(hdev, "%s: no OOB Wakeup IRQ in DT", __func__);
2891 ret = devm_request_irq(&hdev->dev, irq, btusb_oob_wake_handler,
2892 0, "OOB Wake-on-BT", data);
2894 bt_dev_err(hdev, "%s: IRQ request failed", __func__);
2898 ret = device_init_wakeup(dev, true);
2900 bt_dev_err(hdev, "%s: failed to init_wakeup", __func__);
2904 data->oob_wake_irq = irq;
2906 bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq);
2911 static int btusb_probe(struct usb_interface *intf,
2912 const struct usb_device_id *id)
2914 struct usb_endpoint_descriptor *ep_desc;
2915 struct btusb_data *data;
2916 struct hci_dev *hdev;
2917 unsigned ifnum_base;
2920 BT_DBG("intf %p id %p", intf, id);
2922 /* interface numbers are hardcoded in the spec */
2923 if (intf->cur_altsetting->desc.bInterfaceNumber != 0) {
2924 if (!(id->driver_info & BTUSB_IFNUM_2))
2926 if (intf->cur_altsetting->desc.bInterfaceNumber != 2)
2930 ifnum_base = intf->cur_altsetting->desc.bInterfaceNumber;
2932 if (!id->driver_info) {
2933 const struct usb_device_id *match;
2935 match = usb_match_id(intf, blacklist_table);
2940 if (id->driver_info == BTUSB_IGNORE)
2943 if (id->driver_info & BTUSB_ATH3012) {
2944 struct usb_device *udev = interface_to_usbdev(intf);
2946 /* Old firmware would otherwise let ath3k driver load
2947 * patch and sysconfig files
2949 if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
2953 data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
2957 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
2958 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
2960 if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
2961 data->intr_ep = ep_desc;
2965 if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
2966 data->bulk_tx_ep = ep_desc;
2970 if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
2971 data->bulk_rx_ep = ep_desc;
2976 if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
2979 if (id->driver_info & BTUSB_AMP) {
2980 data->cmdreq_type = USB_TYPE_CLASS | 0x01;
2981 data->cmdreq = 0x2b;
2983 data->cmdreq_type = USB_TYPE_CLASS;
2984 data->cmdreq = 0x00;
2987 data->udev = interface_to_usbdev(intf);
2990 INIT_WORK(&data->work, btusb_work);
2991 INIT_WORK(&data->waker, btusb_waker);
2992 init_usb_anchor(&data->deferred);
2993 init_usb_anchor(&data->tx_anchor);
2994 spin_lock_init(&data->txlock);
2996 init_usb_anchor(&data->intr_anchor);
2997 init_usb_anchor(&data->bulk_anchor);
2998 init_usb_anchor(&data->isoc_anchor);
2999 init_usb_anchor(&data->diag_anchor);
3000 spin_lock_init(&data->rxlock);
3002 if (id->driver_info & BTUSB_INTEL_NEW) {
3003 data->recv_event = btusb_recv_event_intel;
3004 data->recv_bulk = btusb_recv_bulk_intel;
3005 set_bit(BTUSB_BOOTLOADER, &data->flags);
3007 data->recv_event = hci_recv_frame;
3008 data->recv_bulk = btusb_recv_bulk;
3011 hdev = hci_alloc_dev();
3015 hdev->bus = HCI_USB;
3016 hci_set_drvdata(hdev, data);
3018 if (id->driver_info & BTUSB_AMP)
3019 hdev->dev_type = HCI_AMP;
3021 hdev->dev_type = HCI_PRIMARY;
3025 SET_HCIDEV_DEV(hdev, &intf->dev);
3027 hdev->open = btusb_open;
3028 hdev->close = btusb_close;
3029 hdev->flush = btusb_flush;
3030 hdev->send = btusb_send_frame;
3031 hdev->notify = btusb_notify;
3034 err = btusb_config_oob_wake(hdev);
3038 /* Marvell devices may need a specific chip configuration */
3039 if (id->driver_info & BTUSB_MARVELL && data->oob_wake_irq) {
3040 err = marvell_config_oob_wake(hdev);
3045 if (id->driver_info & BTUSB_CW6622)
3046 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
3048 if (id->driver_info & BTUSB_BCM2045)
3049 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
3051 if (id->driver_info & BTUSB_BCM92035)
3052 hdev->setup = btusb_setup_bcm92035;
3054 #ifdef CONFIG_BT_HCIBTUSB_BCM
3055 if (id->driver_info & BTUSB_BCM_PATCHRAM) {
3056 hdev->manufacturer = 15;
3057 hdev->setup = btbcm_setup_patchram;
3058 hdev->set_diag = btusb_bcm_set_diag;
3059 hdev->set_bdaddr = btbcm_set_bdaddr;
3061 /* Broadcom LM_DIAG Interface numbers are hardcoded */
3062 data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
3065 if (id->driver_info & BTUSB_BCM_APPLE) {
3066 hdev->manufacturer = 15;
3067 hdev->setup = btbcm_setup_apple;
3068 hdev->set_diag = btusb_bcm_set_diag;
3070 /* Broadcom LM_DIAG Interface numbers are hardcoded */
3071 data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
3075 if (id->driver_info & BTUSB_INTEL) {
3076 hdev->manufacturer = 2;
3077 hdev->setup = btusb_setup_intel;
3078 hdev->shutdown = btusb_shutdown_intel;
3079 hdev->set_diag = btintel_set_diag_mfg;
3080 hdev->set_bdaddr = btintel_set_bdaddr;
3081 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
3082 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
3083 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
3086 if (id->driver_info & BTUSB_INTEL_NEW) {
3087 hdev->manufacturer = 2;
3088 hdev->send = btusb_send_frame_intel;
3089 hdev->setup = btusb_setup_intel_new;
3090 hdev->hw_error = btintel_hw_error;
3091 hdev->set_diag = btintel_set_diag;
3092 hdev->set_bdaddr = btintel_set_bdaddr;
3093 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
3094 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
3097 if (id->driver_info & BTUSB_MARVELL)
3098 hdev->set_bdaddr = btusb_set_bdaddr_marvell;
3100 if (id->driver_info & BTUSB_SWAVE) {
3101 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
3102 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
3105 if (id->driver_info & BTUSB_INTEL_BOOT) {
3106 hdev->manufacturer = 2;
3107 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
3110 if (id->driver_info & BTUSB_ATH3012) {
3111 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
3112 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
3113 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
3116 if (id->driver_info & BTUSB_QCA_ROME) {
3117 data->setup_on_usb = btusb_setup_qca;
3118 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
3120 /* QCA Rome devices lose their updated firmware over suspend,
3121 * but the USB hub doesn't notice any status change.
3122 * Explicitly request a device reset on resume.
3124 set_bit(BTUSB_RESET_RESUME, &data->flags);
3127 #ifdef CONFIG_BT_HCIBTUSB_RTL
3128 if (id->driver_info & BTUSB_REALTEK) {
3129 hdev->setup = btrtl_setup_realtek;
3131 /* Realtek devices lose their updated firmware over suspend,
3132 * but the USB hub doesn't notice any status change.
3133 * Explicitly request a device reset on resume.
3135 set_bit(BTUSB_RESET_RESUME, &data->flags);
3139 if (id->driver_info & BTUSB_AMP) {
3140 /* AMP controllers do not support SCO packets */
3143 /* Interface orders are hardcoded in the specification */
3144 data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
3148 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
3150 if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
3151 if (!disable_scofix)
3152 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
3155 if (id->driver_info & BTUSB_BROKEN_ISOC)
3158 if (id->driver_info & BTUSB_DIGIANSWER) {
3159 data->cmdreq_type = USB_TYPE_VENDOR;
3160 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
3163 if (id->driver_info & BTUSB_CSR) {
3164 struct usb_device *udev = data->udev;
3165 u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
3167 /* Old firmware would otherwise execute USB reset */
3168 if (bcdDevice < 0x117)
3169 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
3171 /* Fake CSR devices with broken commands */
3172 if (bcdDevice <= 0x100 || bcdDevice == 0x134)
3173 hdev->setup = btusb_setup_csr;
3175 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
3178 if (id->driver_info & BTUSB_SNIFFER) {
3179 struct usb_device *udev = data->udev;
3181 /* New sniffer firmware has crippled HCI interface */
3182 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
3183 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
3186 if (id->driver_info & BTUSB_INTEL_BOOT) {
3187 /* A bug in the bootloader causes that interrupt interface is
3188 * only enabled after receiving SetInterface(0, AltSetting=0).
3190 err = usb_set_interface(data->udev, 0, 0);
3192 BT_ERR("failed to set interface 0, alt 0 %d", err);
3198 err = usb_driver_claim_interface(&btusb_driver,
3204 #ifdef CONFIG_BT_HCIBTUSB_BCM
3206 if (!usb_driver_claim_interface(&btusb_driver,
3208 __set_diag_interface(hdev);
3214 err = hci_register_dev(hdev);
3218 usb_set_intfdata(intf, data);
3227 static void btusb_disconnect(struct usb_interface *intf)
3229 struct btusb_data *data = usb_get_intfdata(intf);
3230 struct hci_dev *hdev;
3232 BT_DBG("intf %p", intf);
3238 usb_set_intfdata(data->intf, NULL);
3241 usb_set_intfdata(data->isoc, NULL);
3244 usb_set_intfdata(data->diag, NULL);
3246 hci_unregister_dev(hdev);
3248 if (intf == data->intf) {
3250 usb_driver_release_interface(&btusb_driver, data->isoc);
3252 usb_driver_release_interface(&btusb_driver, data->diag);
3253 } else if (intf == data->isoc) {
3255 usb_driver_release_interface(&btusb_driver, data->diag);
3256 usb_driver_release_interface(&btusb_driver, data->intf);
3257 } else if (intf == data->diag) {
3258 usb_driver_release_interface(&btusb_driver, data->intf);
3260 usb_driver_release_interface(&btusb_driver, data->isoc);
3263 if (data->oob_wake_irq)
3264 device_init_wakeup(&data->udev->dev, false);
3270 static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
3272 struct btusb_data *data = usb_get_intfdata(intf);
3274 BT_DBG("intf %p", intf);
3276 if (data->suspend_count++)
3279 spin_lock_irq(&data->txlock);
3280 if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
3281 set_bit(BTUSB_SUSPENDING, &data->flags);
3282 spin_unlock_irq(&data->txlock);
3284 spin_unlock_irq(&data->txlock);
3285 data->suspend_count--;
3289 cancel_work_sync(&data->work);
3291 btusb_stop_traffic(data);
3292 usb_kill_anchored_urbs(&data->tx_anchor);
3294 if (data->oob_wake_irq && device_may_wakeup(&data->udev->dev)) {
3295 set_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
3296 enable_irq_wake(data->oob_wake_irq);
3297 enable_irq(data->oob_wake_irq);
3300 /* Optionally request a device reset on resume, but only when
3301 * wakeups are disabled. If wakeups are enabled we assume the
3302 * device will stay powered up throughout suspend.
3304 if (test_bit(BTUSB_RESET_RESUME, &data->flags) &&
3305 !device_may_wakeup(&data->udev->dev))
3306 data->udev->reset_resume = 1;
3311 static void play_deferred(struct btusb_data *data)
3316 while ((urb = usb_get_from_anchor(&data->deferred))) {
3317 usb_anchor_urb(urb, &data->tx_anchor);
3319 err = usb_submit_urb(urb, GFP_ATOMIC);
3321 if (err != -EPERM && err != -ENODEV)
3322 BT_ERR("%s urb %p submission failed (%d)",
3323 data->hdev->name, urb, -err);
3324 kfree(urb->setup_packet);
3325 usb_unanchor_urb(urb);
3330 data->tx_in_flight++;
3334 /* Cleanup the rest deferred urbs. */
3335 while ((urb = usb_get_from_anchor(&data->deferred))) {
3336 kfree(urb->setup_packet);
3341 static int btusb_resume(struct usb_interface *intf)
3343 struct btusb_data *data = usb_get_intfdata(intf);
3344 struct hci_dev *hdev = data->hdev;
3347 BT_DBG("intf %p", intf);
3349 if (--data->suspend_count)
3352 /* Disable only if not already disabled (keep it balanced) */
3353 if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
3354 disable_irq(data->oob_wake_irq);
3355 disable_irq_wake(data->oob_wake_irq);
3358 if (!test_bit(HCI_RUNNING, &hdev->flags))
3361 if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
3362 err = btusb_submit_intr_urb(hdev, GFP_NOIO);
3364 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
3369 if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
3370 err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
3372 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
3376 btusb_submit_bulk_urb(hdev, GFP_NOIO);
3379 if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
3380 if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
3381 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
3383 btusb_submit_isoc_urb(hdev, GFP_NOIO);
3386 spin_lock_irq(&data->txlock);
3387 play_deferred(data);
3388 clear_bit(BTUSB_SUSPENDING, &data->flags);
3389 spin_unlock_irq(&data->txlock);
3390 schedule_work(&data->work);
3395 usb_scuttle_anchored_urbs(&data->deferred);
3397 spin_lock_irq(&data->txlock);
3398 clear_bit(BTUSB_SUSPENDING, &data->flags);
3399 spin_unlock_irq(&data->txlock);
3405 static struct usb_driver btusb_driver = {
3407 .probe = btusb_probe,
3408 .disconnect = btusb_disconnect,
3410 .suspend = btusb_suspend,
3411 .resume = btusb_resume,
3413 .id_table = btusb_table,
3414 .supports_autosuspend = 1,
3415 .disable_hub_initiated_lpm = 1,
3418 module_usb_driver(btusb_driver);
3420 module_param(disable_scofix, bool, 0644);
3421 MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
3423 module_param(force_scofix, bool, 0644);
3424 MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
3426 module_param(reset, bool, 0644);
3427 MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
3429 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3430 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
3431 MODULE_VERSION(VERSION);
3432 MODULE_LICENSE("GPL");