drivers/bluetooth/btmtkuart.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 // Copyright (c) 2018 MediaTek Inc.
   3
   4 /*
   5  * Bluetooth support for MediaTek serial devices
   6  *
   7  * Author: Sean Wang <sean.wang@mediatek.com>
   8  *
   9  */
  10
  11 #include <asm/unaligned.h>
  12 #include <linux/atomic.h>
  13 #include <linux/clk.h>
  14 #include <linux/firmware.h>
  15 #include <linux/gpio/consumer.h>
  16 #include <linux/iopoll.h>
  17 #include <linux/kernel.h>
  18 #include <linux/module.h>
  19 #include <linux/of.h>
  20 #include <linux/of_device.h>
  21 #include <linux/pinctrl/consumer.h>
  22 #include <linux/pm_runtime.h>
  23 #include <linux/regulator/consumer.h>
  24 #include <linux/serdev.h>
  25 #include <linux/skbuff.h>
  26
  27 #include <net/bluetooth/bluetooth.h>
  28 #include <net/bluetooth/hci_core.h>
  29
  30 #include "h4_recv.h"
  31
  32 #define VERSION "0.2"
  33
  34 #define FIRMWARE_MT7622         "mediatek/mt7622pr2h.bin"
  35 #define FIRMWARE_MT7663         "mediatek/mt7663pr2h.bin"
  36 #define FIRMWARE_MT7668         "mediatek/mt7668pr2h.bin"
  37
  38 #define MTK_STP_TLR_SIZE        2
  39
  40 #define BTMTKUART_TX_STATE_ACTIVE       1
  41 #define BTMTKUART_TX_STATE_WAKEUP       2
  42 #define BTMTKUART_TX_WAIT_VND_EVT       3
  43 #define BTMTKUART_REQUIRED_WAKEUP       4
  44
  45 #define BTMTKUART_FLAG_STANDALONE_HW     BIT(0)
  46
  47 enum {
  48         MTK_WMT_PATCH_DWNLD = 0x1,
  49         MTK_WMT_TEST = 0x2,
  50         MTK_WMT_WAKEUP = 0x3,
  51         MTK_WMT_HIF = 0x4,
  52         MTK_WMT_FUNC_CTRL = 0x6,
  53         MTK_WMT_RST = 0x7,
  54         MTK_WMT_SEMAPHORE = 0x17,
  55 };
  56
  57 enum {
  58         BTMTK_WMT_INVALID,
  59         BTMTK_WMT_PATCH_UNDONE,
  60         BTMTK_WMT_PATCH_DONE,
  61         BTMTK_WMT_ON_UNDONE,
  62         BTMTK_WMT_ON_DONE,
  63         BTMTK_WMT_ON_PROGRESS,
  64 };
  65
  66 struct mtk_stp_hdr {
  67         u8      prefix;
  68         __be16  dlen;
  69         u8      cs;
  70 } __packed;
  71
  72 struct btmtkuart_data {
  73         unsigned int flags;
  74         const char *fwname;
  75 };
  76
  77 struct mtk_wmt_hdr {
  78         u8      dir;
  79         u8      op;
  80         __le16  dlen;
  81         u8      flag;
  82 } __packed;
  83
  84 struct mtk_hci_wmt_cmd {
  85         struct mtk_wmt_hdr hdr;
  86         u8 data[256];
  87 } __packed;
  88
  89 struct btmtk_hci_wmt_evt {
  90         struct hci_event_hdr hhdr;
  91         struct mtk_wmt_hdr whdr;
  92 } __packed;
  93
  94 struct btmtk_hci_wmt_evt_funcc {
  95         struct btmtk_hci_wmt_evt hwhdr;
  96         __be16 status;
  97 } __packed;
  98
  99 struct btmtk_tci_sleep {
 100         u8 mode;
 101         __le16 duration;
 102         __le16 host_duration;
 103         u8 host_wakeup_pin;
 104         u8 time_compensation;
 105 } __packed;
 106
 107 struct btmtk_hci_wmt_params {
 108         u8 op;
 109         u8 flag;
 110         u16 dlen;
 111         const void *data;
 112         u32 *status;
 113 };
 114
 115 struct btmtkuart_dev {
 116         struct hci_dev *hdev;
 117         struct serdev_device *serdev;
 118
 119         struct clk *clk;
 120         struct clk *osc;
 121         struct regulator *vcc;
 122         struct gpio_desc *reset;
 123         struct gpio_desc *boot;
 124         struct pinctrl *pinctrl;
 125         struct pinctrl_state *pins_runtime;
 126         struct pinctrl_state *pins_boot;
 127         speed_t desired_speed;
 128         speed_t curr_speed;
 129
 130         struct work_struct tx_work;
 131         unsigned long tx_state;
 132         struct sk_buff_head txq;
 133
 134         struct sk_buff *rx_skb;
 135         struct sk_buff *evt_skb;
 136
 137         u8      stp_pad[6];
 138         u8      stp_cursor;
 139         u16     stp_dlen;
 140
 141         const struct btmtkuart_data *data;
 142 };
 143
 144 #define btmtkuart_is_standalone(bdev)   \
 145         ((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
 146 #define btmtkuart_is_builtin_soc(bdev)  \
 147         !((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
 148
 149 static int mtk_hci_wmt_sync(struct hci_dev *hdev,
 150                             struct btmtk_hci_wmt_params *wmt_params)
 151 {
 152         struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
 153         struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
 154         u32 hlen, status = BTMTK_WMT_INVALID;
 155         struct btmtk_hci_wmt_evt *wmt_evt;
 156         struct mtk_hci_wmt_cmd wc;
 157         struct mtk_wmt_hdr *hdr;
 158         int err;
 159
 160         hlen = sizeof(*hdr) + wmt_params->dlen;
 161         if (hlen > 255)
 162                 return -EINVAL;
 163
 164         hdr = (struct mtk_wmt_hdr *)&wc;
 165         hdr->dir = 1;
 166         hdr->op = wmt_params->op;
 167         hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
 168         hdr->flag = wmt_params->flag;
 169         memcpy(wc.data, wmt_params->data, wmt_params->dlen);
 170
 171         set_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
 172
 173         err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
 174         if (err < 0) {
 175                 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
 176                 return err;
 177         }
 178
 179         /* The vendor specific WMT commands are all answered by a vendor
 180          * specific event and will not have the Command Status or Command
 181          * Complete as with usual HCI command flow control.
 182          *
 183          * After sending the command, wait for BTMTKUART_TX_WAIT_VND_EVT
 184          * state to be cleared. The driver specific event receive routine
 185          * will clear that state and with that indicate completion of the
 186          * WMT command.
 187          */
 188         err = wait_on_bit_timeout(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT,
 189                                   TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
 190         if (err == -EINTR) {
 191                 bt_dev_err(hdev, "Execution of wmt command interrupted");
 192                 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
 193                 return err;
 194         }
 195
 196         if (err) {
 197                 bt_dev_err(hdev, "Execution of wmt command timed out");
 198                 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
 199                 return -ETIMEDOUT;
 200         }
 201
 202         /* Parse and handle the return WMT event */
 203         wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data;
 204         if (wmt_evt->whdr.op != hdr->op) {
 205                 bt_dev_err(hdev, "Wrong op received %d expected %d",
 206                            wmt_evt->whdr.op, hdr->op);
 207                 err = -EIO;
 208                 goto err_free_skb;
 209         }
 210
 211         switch (wmt_evt->whdr.op) {
 212         case MTK_WMT_SEMAPHORE:
 213                 if (wmt_evt->whdr.flag == 2)
 214                         status = BTMTK_WMT_PATCH_UNDONE;
 215                 else
 216                         status = BTMTK_WMT_PATCH_DONE;
 217                 break;
 218         case MTK_WMT_FUNC_CTRL:
 219                 wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
 220                 if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
 221                         status = BTMTK_WMT_ON_DONE;
 222                 else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
 223                         status = BTMTK_WMT_ON_PROGRESS;
 224                 else
 225                         status = BTMTK_WMT_ON_UNDONE;
 226                 break;
 227         }
 228
 229         if (wmt_params->status)
 230                 *wmt_params->status = status;
 231
 232 err_free_skb:
 233         kfree_skb(bdev->evt_skb);
 234         bdev->evt_skb = NULL;
 235
 236         return err;
 237 }
 238
 239 static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
 240 {
 241         struct btmtk_hci_wmt_params wmt_params;
 242         const struct firmware *fw;
 243         const u8 *fw_ptr;
 244         size_t fw_size;
 245         int err, dlen;
 246         u8 flag;
 247
 248         err = request_firmware(&fw, fwname, &hdev->dev);
 249         if (err < 0) {
 250                 bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
 251                 return err;
 252         }
 253
 254         fw_ptr = fw->data;
 255         fw_size = fw->size;
 256
 257         /* The size of patch header is 30 bytes, should be skip */
 258         if (fw_size < 30) {
 259                 err = -EINVAL;
 260                 goto free_fw;
 261         }
 262
 263         fw_size -= 30;
 264         fw_ptr += 30;
 265         flag = 1;
 266
 267         wmt_params.op = MTK_WMT_PATCH_DWNLD;
 268         wmt_params.status = NULL;
 269
 270         while (fw_size > 0) {
 271                 dlen = min_t(int, 250, fw_size);
 272
 273                 /* Tell device the position in sequence */
 274                 if (fw_size - dlen <= 0)
 275                         flag = 3;
 276                 else if (fw_size < fw->size - 30)
 277                         flag = 2;
 278
 279                 wmt_params.flag = flag;
 280                 wmt_params.dlen = dlen;
 281                 wmt_params.data = fw_ptr;
 282
 283                 err = mtk_hci_wmt_sync(hdev, &wmt_params);
 284                 if (err < 0) {
 285                         bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
 286                                    err);
 287                         goto free_fw;
 288                 }
 289
 290                 fw_size -= dlen;
 291                 fw_ptr += dlen;
 292         }
 293
 294         wmt_params.op = MTK_WMT_RST;
 295         wmt_params.flag = 4;
 296         wmt_params.dlen = 0;
 297         wmt_params.data = NULL;
 298         wmt_params.status = NULL;
 299
 300         /* Activate funciton the firmware providing to */
 301         err = mtk_hci_wmt_sync(hdev, &wmt_params);
 302         if (err < 0) {
 303                 bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
 304                 goto free_fw;
 305         }
 306
 307         /* Wait a few moments for firmware activation done */
 308         usleep_range(10000, 12000);
 309
 310 free_fw:
 311         release_firmware(fw);
 312         return err;
 313 }
 314
 315 static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
 316 {
 317         struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
 318         struct hci_event_hdr *hdr = (void *)skb->data;
 319         int err;
 320
 321         /* Fix up the vendor event id with 0xff for vendor specific instead
 322          * of 0xe4 so that event send via monitoring socket can be parsed
 323          * properly.
 324          */
 325         if (hdr->evt == 0xe4)
 326                 hdr->evt = HCI_EV_VENDOR;
 327
 328         /* When someone waits for the WMT event, the skb is being cloned
 329          * and being processed the events from there then.
 330          */
 331         if (test_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state)) {
 332                 bdev->evt_skb = skb_clone(skb, GFP_KERNEL);
 333                 if (!bdev->evt_skb) {
 334                         err = -ENOMEM;
 335                         goto err_out;
 336                 }
 337         }
 338
 339         err = hci_recv_frame(hdev, skb);
 340         if (err < 0)
 341                 goto err_free_skb;
 342
 343         if (hdr->evt == HCI_EV_VENDOR) {
 344                 if (test_and_clear_bit(BTMTKUART_TX_WAIT_VND_EVT,
 345                                        &bdev->tx_state)) {
 346                         /* Barrier to sync with other CPUs */
 347                         smp_mb__after_atomic();
 348                         wake_up_bit(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT);
 349                 }
 350         }
 351
 352         return 0;
 353
 354 err_free_skb:
 355         kfree_skb(bdev->evt_skb);
 356         bdev->evt_skb = NULL;
 357
 358 err_out:
 359         return err;
 360 }
 361
 362 static const struct h4_recv_pkt mtk_recv_pkts[] = {
 363         { H4_RECV_ACL,      .recv = hci_recv_frame },
 364         { H4_RECV_SCO,      .recv = hci_recv_frame },
 365         { H4_RECV_EVENT,    .recv = btmtkuart_recv_event },
 366 };
 367
 368 static void btmtkuart_tx_work(struct work_struct *work)
 369 {
 370         struct btmtkuart_dev *bdev = container_of(work, struct btmtkuart_dev,
 371                                                    tx_work);
 372         struct serdev_device *serdev = bdev->serdev;
 373         struct hci_dev *hdev = bdev->hdev;
 374
 375         while (1) {
 376                 clear_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
 377
 378                 while (1) {
 379                         struct sk_buff *skb = skb_dequeue(&bdev->txq);
 380                         int len;
 381
 382                         if (!skb)
 383                                 break;
 384
 385                         len = serdev_device_write_buf(serdev, skb->data,
 386                                                       skb->len);
 387                         hdev->stat.byte_tx += len;
 388
 389                         skb_pull(skb, len);
 390                         if (skb->len > 0) {
 391                                 skb_queue_head(&bdev->txq, skb);
 392                                 break;
 393                         }
 394
 395                         switch (hci_skb_pkt_type(skb)) {
 396                         case HCI_COMMAND_PKT:
 397                                 hdev->stat.cmd_tx++;
 398                                 break;
 399                         case HCI_ACLDATA_PKT:
 400                                 hdev->stat.acl_tx++;
 401                                 break;
 402                         case HCI_SCODATA_PKT:
 403                                 hdev->stat.sco_tx++;
 404                                 break;
 405                         }
 406
 407                         kfree_skb(skb);
 408                 }
 409
 410                 if (!test_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state))
 411                         break;
 412         }
 413
 414         clear_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state);
 415 }
 416
 417 static void btmtkuart_tx_wakeup(struct btmtkuart_dev *bdev)
 418 {
 419         if (test_and_set_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state))
 420                 set_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
 421
 422         schedule_work(&bdev->tx_work);
 423 }
 424
 425 static const unsigned char *
 426 mtk_stp_split(struct btmtkuart_dev *bdev, const unsigned char *data, int count,
 427               int *sz_h4)
 428 {
 429         struct mtk_stp_hdr *shdr;
 430
 431         /* The cursor is reset when all the data of STP is consumed out */
 432         if (!bdev->stp_dlen && bdev->stp_cursor >= 6)
 433                 bdev->stp_cursor = 0;
 434
 435         /* Filling pad until all STP info is obtained */
 436         while (bdev->stp_cursor < 6 && count > 0) {
 437                 bdev->stp_pad[bdev->stp_cursor] = *data;
 438                 bdev->stp_cursor++;
 439                 data++;
 440                 count--;
 441         }
 442
 443         /* Retrieve STP info and have a sanity check */
 444         if (!bdev->stp_dlen && bdev->stp_cursor >= 6) {
 445                 shdr = (struct mtk_stp_hdr *)&bdev->stp_pad[2];
 446                 bdev->stp_dlen = be16_to_cpu(shdr->dlen) & 0x0fff;
 447
 448                 /* Resync STP when unexpected data is being read */
 449                 if (shdr->prefix != 0x80 || bdev->stp_dlen > 2048) {
 450                         bt_dev_err(bdev->hdev, "stp format unexpect (%d, %d)",
 451                                    shdr->prefix, bdev->stp_dlen);
 452                         bdev->stp_cursor = 2;
 453                         bdev->stp_dlen = 0;
 454                 }
 455         }
 456
 457         /* Directly quit when there's no data found for H4 can process */
 458         if (count <= 0)
 459                 return NULL;
 460
 461         /* Tranlate to how much the size of data H4 can handle so far */
 462         *sz_h4 = min_t(int, count, bdev->stp_dlen);
 463
 464         /* Update the remaining size of STP packet */
 465         bdev->stp_dlen -= *sz_h4;
 466
 467         /* Data points to STP payload which can be handled by H4 */
 468         return data;
 469 }
 470
 471 static int btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count)
 472 {
 473         struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
 474         const unsigned char *p_left = data, *p_h4;
 475         int sz_left = count, sz_h4, adv;
 476         int err;
 477
 478         while (sz_left > 0) {
 479                 /*  The serial data received from MT7622 BT controller is
 480                  *  at all time padded around with the STP header and tailer.
 481                  *
 482                  *  A full STP packet is looking like
 483                  *   -----------------------------------
 484                  *  | STP header  |  H:4   | STP tailer |
 485                  *   -----------------------------------
 486                  *  but it doesn't guarantee to contain a full H:4 packet which
 487                  *  means that it's possible for multiple STP packets forms a
 488                  *  full H:4 packet that means extra STP header + length doesn't
 489                  *  indicate a full H:4 frame, things can fragment. Whose length
 490                  *  recorded in STP header just shows up the most length the
 491                  *  H:4 engine can handle currently.
 492                  */
 493
 494                 p_h4 = mtk_stp_split(bdev, p_left, sz_left, &sz_h4);
 495                 if (!p_h4)
 496                         break;
 497
 498                 adv = p_h4 - p_left;
 499                 sz_left -= adv;
 500                 p_left += adv;
 501
 502                 bdev->rx_skb = h4_recv_buf(bdev->hdev, bdev->rx_skb, p_h4,
 503                                            sz_h4, mtk_recv_pkts,
 504                                            ARRAY_SIZE(mtk_recv_pkts));
 505                 if (IS_ERR(bdev->rx_skb)) {
 506                         err = PTR_ERR(bdev->rx_skb);
 507                         bt_dev_err(bdev->hdev,
 508                                    "Frame reassembly failed (%d)", err);
 509                         bdev->rx_skb = NULL;
 510                         return err;
 511                 }
 512
 513                 sz_left -= sz_h4;
 514                 p_left += sz_h4;
 515         }
 516
 517         return 0;
 518 }
 519
 520 static int btmtkuart_receive_buf(struct serdev_device *serdev, const u8 *data,
 521                                  size_t count)
 522 {
 523         struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
 524         int err;
 525
 526         err = btmtkuart_recv(bdev->hdev, data, count);
 527         if (err < 0)
 528                 return err;
 529
 530         bdev->hdev->stat.byte_rx += count;
 531
 532         return count;
 533 }
 534
 535 static void btmtkuart_write_wakeup(struct serdev_device *serdev)
 536 {
 537         struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
 538
 539         btmtkuart_tx_wakeup(bdev);
 540 }
 541
 542 static const struct serdev_device_ops btmtkuart_client_ops = {
 543         .receive_buf = btmtkuart_receive_buf,
 544         .write_wakeup = btmtkuart_write_wakeup,
 545 };
 546
 547 static int btmtkuart_open(struct hci_dev *hdev)
 548 {
 549         struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
 550         struct device *dev;
 551         int err;
 552
 553         err = serdev_device_open(bdev->serdev);
 554         if (err) {
 555                 bt_dev_err(hdev, "Unable to open UART device %s",
 556                            dev_name(&bdev->serdev->dev));
 557                 goto err_open;
 558         }
 559
 560         if (btmtkuart_is_standalone(bdev)) {
 561                 if (bdev->curr_speed != bdev->desired_speed)
 562                         err = serdev_device_set_baudrate(bdev->serdev,
 563                                                          115200);
 564                 else
 565                         err = serdev_device_set_baudrate(bdev->serdev,
 566                                                          bdev->desired_speed);
 567
 568                 if (err < 0) {
 569                         bt_dev_err(hdev, "Unable to set baudrate UART device %s",
 570                                    dev_name(&bdev->serdev->dev));
 571                         goto  err_serdev_close;
 572                 }
 573
 574                 serdev_device_set_flow_control(bdev->serdev, false);
 575         }
 576
 577         bdev->stp_cursor = 2;
 578         bdev->stp_dlen = 0;
 579
 580         dev = &bdev->serdev->dev;
 581
 582         /* Enable the power domain and clock the device requires */
 583         pm_runtime_enable(dev);
 584         err = pm_runtime_get_sync(dev);
 585         if (err < 0) {
 586                 pm_runtime_put_noidle(dev);
 587                 goto err_disable_rpm;
 588         }
 589
 590         err = clk_prepare_enable(bdev->clk);
 591         if (err < 0)
 592                 goto err_put_rpm;
 593
 594         return 0;
 595
 596 err_put_rpm:
 597         pm_runtime_put_sync(dev);
 598 err_disable_rpm:
 599         pm_runtime_disable(dev);
 600 err_serdev_close:
 601         serdev_device_close(bdev->serdev);
 602 err_open:
 603         return err;
 604 }
 605
 606 static int btmtkuart_close(struct hci_dev *hdev)
 607 {
 608         struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
 609         struct device *dev = &bdev->serdev->dev;
 610
 611         /* Shutdown the clock and power domain the device requires */
 612         clk_disable_unprepare(bdev->clk);
 613         pm_runtime_put_sync(dev);
 614         pm_runtime_disable(dev);
 615
 616         serdev_device_close(bdev->serdev);
 617
 618         return 0;
 619 }
 620
 621 static int btmtkuart_flush(struct hci_dev *hdev)
 622 {
 623         struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
 624
 625         /* Flush any pending characters */
 626         serdev_device_write_flush(bdev->serdev);
 627         skb_queue_purge(&bdev->txq);
 628
 629         cancel_work_sync(&bdev->tx_work);
 630
 631         kfree_skb(bdev->rx_skb);
 632         bdev->rx_skb = NULL;
 633
 634         bdev->stp_cursor = 2;
 635         bdev->stp_dlen = 0;
 636
 637         return 0;
 638 }
 639
 640 static int btmtkuart_func_query(struct hci_dev *hdev)
 641 {
 642         struct btmtk_hci_wmt_params wmt_params;
 643         int status, err;
 644         u8 param = 0;
 645
 646         /* Query whether the function is enabled */
 647         wmt_params.op = MTK_WMT_FUNC_CTRL;
 648         wmt_params.flag = 4;
 649         wmt_params.dlen = sizeof(param);
 650         wmt_params.data = &param;
 651         wmt_params.status = &status;
 652
 653         err = mtk_hci_wmt_sync(hdev, &wmt_params);
 654         if (err < 0) {
 655                 bt_dev_err(hdev, "Failed to query function status (%d)", err);
 656                 return err;
 657         }
 658
 659         return status;
 660 }
 661
 662 static int btmtkuart_change_baudrate(struct hci_dev *hdev)
 663 {
 664         struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
 665         struct btmtk_hci_wmt_params wmt_params;
 666         __le32 baudrate;
 667         u8 param;
 668         int err;
 669
 670         /* Indicate the device to enter the probe state the host is
 671          * ready to change a new baudrate.
 672          */
 673         baudrate = cpu_to_le32(bdev->desired_speed);
 674         wmt_params.op = MTK_WMT_HIF;
 675         wmt_params.flag = 1;
 676         wmt_params.dlen = 4;
 677         wmt_params.data = &baudrate;
 678         wmt_params.status = NULL;
 679
 680         err = mtk_hci_wmt_sync(hdev, &wmt_params);
 681         if (err < 0) {
 682                 bt_dev_err(hdev, "Failed to device baudrate (%d)", err);
 683                 return err;
 684         }
 685
 686         err = serdev_device_set_baudrate(bdev->serdev,
 687                                          bdev->desired_speed);
 688         if (err < 0) {
 689                 bt_dev_err(hdev, "Failed to set up host baudrate (%d)",
 690                            err);
 691                 return err;
 692         }
 693
 694         serdev_device_set_flow_control(bdev->serdev, false);
 695
 696         /* Send a dummy byte 0xff to activate the new baudrate */
 697         param = 0xff;
 698         err = serdev_device_write_buf(bdev->serdev, &param, sizeof(param));
 699         if (err < 0 || err < sizeof(param))
 700                 return err;
 701
 702         serdev_device_wait_until_sent(bdev->serdev, 0);
 703
 704         /* Wait some time for the device changing baudrate done */
 705         usleep_range(20000, 22000);
 706
 707         /* Test the new baudrate */
 708         wmt_params.op = MTK_WMT_TEST;
 709         wmt_params.flag = 7;
 710         wmt_params.dlen = 0;
 711         wmt_params.data = NULL;
 712         wmt_params.status = NULL;
 713
 714         err = mtk_hci_wmt_sync(hdev, &wmt_params);
 715         if (err < 0) {
 716                 bt_dev_err(hdev, "Failed to test new baudrate (%d)",
 717                            err);
 718                 return err;
 719         }
 720
 721         bdev->curr_speed = bdev->desired_speed;
 722
 723         return 0;
 724 }
 725
 726 static int btmtkuart_setup(struct hci_dev *hdev)
 727 {
 728         struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
 729         struct btmtk_hci_wmt_params wmt_params;
 730         ktime_t calltime, delta, rettime;
 731         struct btmtk_tci_sleep tci_sleep;
 732         unsigned long long duration;
 733         struct sk_buff *skb;
 734         int err, status;
 735         u8 param = 0x1;
 736
 737         calltime = ktime_get();
 738
 739         /* Wakeup MCUSYS is required for certain devices before we start to
 740          * do any setups.
 741          */
 742         if (test_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state)) {
 743                 wmt_params.op = MTK_WMT_WAKEUP;
 744                 wmt_params.flag = 3;
 745                 wmt_params.dlen = 0;
 746                 wmt_params.data = NULL;
 747                 wmt_params.status = NULL;
 748
 749                 err = mtk_hci_wmt_sync(hdev, &wmt_params);
 750                 if (err < 0) {
 751                         bt_dev_err(hdev, "Failed to wakeup the chip (%d)", err);
 752                         return err;
 753                 }
 754
 755                 clear_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
 756         }
 757
 758         if (btmtkuart_is_standalone(bdev))
 759                 btmtkuart_change_baudrate(hdev);
 760
 761         /* Query whether the firmware is already download */
 762         wmt_params.op = MTK_WMT_SEMAPHORE;
 763         wmt_params.flag = 1;
 764         wmt_params.dlen = 0;
 765         wmt_params.data = NULL;
 766         wmt_params.status = &status;
 767
 768         err = mtk_hci_wmt_sync(hdev, &wmt_params);
 769         if (err < 0) {
 770                 bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
 771                 return err;
 772         }
 773
 774         if (status == BTMTK_WMT_PATCH_DONE) {
 775                 bt_dev_info(hdev, "Firmware already downloaded");
 776                 goto ignore_setup_fw;
 777         }
 778
 779         /* Setup a firmware which the device definitely requires */
 780         err = mtk_setup_firmware(hdev, bdev->data->fwname);
 781         if (err < 0)
 782                 return err;
 783
 784 ignore_setup_fw:
 785         /* Query whether the device is already enabled */
 786         err = readx_poll_timeout(btmtkuart_func_query, hdev, status,
 787                                  status < 0 || status != BTMTK_WMT_ON_PROGRESS,
 788                                  2000, 5000000);
 789         /* -ETIMEDOUT happens */
 790         if (err < 0)
 791                 return err;
 792
 793         /* The other errors happen in btusb_mtk_func_query */
 794         if (status < 0)
 795                 return status;
 796
 797         if (status == BTMTK_WMT_ON_DONE) {
 798                 bt_dev_info(hdev, "function already on");
 799                 goto ignore_func_on;
 800         }
 801
 802         /* Enable Bluetooth protocol */
 803         wmt_params.op = MTK_WMT_FUNC_CTRL;
 804         wmt_params.flag = 0;
 805         wmt_params.dlen = sizeof(param);
 806         wmt_params.data = &param;
 807         wmt_params.status = NULL;
 808
 809         err = mtk_hci_wmt_sync(hdev, &wmt_params);
 810         if (err < 0) {
 811                 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
 812                 return err;
 813         }
 814
 815 ignore_func_on:
 816         /* Apply the low power environment setup */
 817         tci_sleep.mode = 0x5;
 818         tci_sleep.duration = cpu_to_le16(0x640);
 819         tci_sleep.host_duration = cpu_to_le16(0x640);
 820         tci_sleep.host_wakeup_pin = 0;
 821         tci_sleep.time_compensation = 0;
 822
 823         skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
 824                              HCI_INIT_TIMEOUT);
 825         if (IS_ERR(skb)) {
 826                 err = PTR_ERR(skb);
 827                 bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
 828                 return err;
 829         }
 830         kfree_skb(skb);
 831
 832         rettime = ktime_get();
 833         delta = ktime_sub(rettime, calltime);
 834         duration = (unsigned long long)ktime_to_ns(delta) >> 10;
 835
 836         bt_dev_info(hdev, "Device setup in %llu usecs", duration);
 837
 838         return 0;
 839 }
 840
 841 static int btmtkuart_shutdown(struct hci_dev *hdev)
 842 {
 843         struct btmtk_hci_wmt_params wmt_params;
 844         u8 param = 0x0;
 845         int err;
 846
 847         /* Disable the device */
 848         wmt_params.op = MTK_WMT_FUNC_CTRL;
 849         wmt_params.flag = 0;
 850         wmt_params.dlen = sizeof(param);
 851         wmt_params.data = &param;
 852         wmt_params.status = NULL;
 853
 854         err = mtk_hci_wmt_sync(hdev, &wmt_params);
 855         if (err < 0) {
 856                 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
 857                 return err;
 858         }
 859
 860         return 0;
 861 }
 862
 863 static int btmtkuart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 864 {
 865         struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
 866         struct mtk_stp_hdr *shdr;
 867         int err, dlen, type = 0;
 868
 869         /* Prepend skb with frame type */
 870         memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
 871
 872         /* Make sure that there is enough rooms for STP header and trailer */
 873         if (unlikely(skb_headroom(skb) < sizeof(*shdr)) ||
 874             (skb_tailroom(skb) < MTK_STP_TLR_SIZE)) {
 875                 err = pskb_expand_head(skb, sizeof(*shdr), MTK_STP_TLR_SIZE,
 876                                        GFP_ATOMIC);
 877                 if (err < 0)
 878                         return err;
 879         }
 880
 881         /* Add the STP header */
 882         dlen = skb->len;
 883         shdr = skb_push(skb, sizeof(*shdr));
 884         shdr->prefix = 0x80;
 885         shdr->dlen = cpu_to_be16((dlen & 0x0fff) | (type << 12));
 886         shdr->cs = 0;           /* MT7622 doesn't care about checksum value */
 887
 888         /* Add the STP trailer */
 889         skb_put_zero(skb, MTK_STP_TLR_SIZE);
 890
 891         skb_queue_tail(&bdev->txq, skb);
 892
 893         btmtkuart_tx_wakeup(bdev);
 894         return 0;
 895 }
 896
 897 static int btmtkuart_parse_dt(struct serdev_device *serdev)
 898 {
 899         struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
 900         struct device_node *node = serdev->dev.of_node;
 901         u32 speed = 921600;
 902         int err;
 903
 904         if (btmtkuart_is_standalone(bdev)) {
 905                 of_property_read_u32(node, "current-speed", &speed);
 906
 907                 bdev->desired_speed = speed;
 908
 909                 bdev->vcc = devm_regulator_get(&serdev->dev, "vcc");
 910                 if (IS_ERR(bdev->vcc)) {
 911                         err = PTR_ERR(bdev->vcc);
 912                         return err;
 913                 }
 914
 915                 bdev->osc = devm_clk_get_optional(&serdev->dev, "osc");
 916                 if (IS_ERR(bdev->osc)) {
 917                         err = PTR_ERR(bdev->osc);
 918                         return err;
 919                 }
 920
 921                 bdev->boot = devm_gpiod_get_optional(&serdev->dev, "boot",
 922                                                      GPIOD_OUT_LOW);
 923                 if (IS_ERR(bdev->boot)) {
 924                         err = PTR_ERR(bdev->boot);
 925                         return err;
 926                 }
 927
 928                 bdev->pinctrl = devm_pinctrl_get(&serdev->dev);
 929                 if (IS_ERR(bdev->pinctrl)) {
 930                         err = PTR_ERR(bdev->pinctrl);
 931                         return err;
 932                 }
 933
 934                 bdev->pins_boot = pinctrl_lookup_state(bdev->pinctrl,
 935                                                        "default");
 936                 if (IS_ERR(bdev->pins_boot) && !bdev->boot) {
 937                         err = PTR_ERR(bdev->pins_boot);
 938                         dev_err(&serdev->dev,
 939                                 "Should assign RXD to LOW at boot stage\n");
 940                         return err;
 941                 }
 942
 943                 bdev->pins_runtime = pinctrl_lookup_state(bdev->pinctrl,
 944                                                           "runtime");
 945                 if (IS_ERR(bdev->pins_runtime)) {
 946                         err = PTR_ERR(bdev->pins_runtime);
 947                         return err;
 948                 }
 949
 950                 bdev->reset = devm_gpiod_get_optional(&serdev->dev, "reset",
 951                                                       GPIOD_OUT_LOW);
 952                 if (IS_ERR(bdev->reset)) {
 953                         err = PTR_ERR(bdev->reset);
 954                         return err;
 955                 }
 956         } else if (btmtkuart_is_builtin_soc(bdev)) {
 957                 bdev->clk = devm_clk_get(&serdev->dev, "ref");
 958                 if (IS_ERR(bdev->clk))
 959                         return PTR_ERR(bdev->clk);
 960         }
 961
 962         return 0;
 963 }
 964
 965 static int btmtkuart_probe(struct serdev_device *serdev)
 966 {
 967         struct btmtkuart_dev *bdev;
 968         struct hci_dev *hdev;
 969         int err;
 970
 971         bdev = devm_kzalloc(&serdev->dev, sizeof(*bdev), GFP_KERNEL);
 972         if (!bdev)
 973                 return -ENOMEM;
 974
 975         bdev->data = of_device_get_match_data(&serdev->dev);
 976         if (!bdev->data)
 977                 return -ENODEV;
 978
 979         bdev->serdev = serdev;
 980         serdev_device_set_drvdata(serdev, bdev);
 981
 982         serdev_device_set_client_ops(serdev, &btmtkuart_client_ops);
 983
 984         err = btmtkuart_parse_dt(serdev);
 985         if (err < 0)
 986                 return err;
 987
 988         INIT_WORK(&bdev->tx_work, btmtkuart_tx_work);
 989         skb_queue_head_init(&bdev->txq);
 990
 991         /* Initialize and register HCI device */
 992         hdev = hci_alloc_dev();
 993         if (!hdev) {
 994                 dev_err(&serdev->dev, "Can't allocate HCI device\n");
 995                 return -ENOMEM;
 996         }
 997
 998         bdev->hdev = hdev;
 999
1000         hdev->bus = HCI_UART;
1001         hci_set_drvdata(hdev, bdev);
1002
1003         hdev->open     = btmtkuart_open;
1004         hdev->close    = btmtkuart_close;
1005         hdev->flush    = btmtkuart_flush;
1006         hdev->setup    = btmtkuart_setup;
1007         hdev->shutdown = btmtkuart_shutdown;
1008         hdev->send     = btmtkuart_send_frame;
1009         SET_HCIDEV_DEV(hdev, &serdev->dev);
1010
1011         hdev->manufacturer = 70;
1012         set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
1013
1014         if (btmtkuart_is_standalone(bdev)) {
1015                 err = clk_prepare_enable(bdev->osc);
1016                 if (err < 0)
1017                         goto err_hci_free_dev;
1018
1019                 if (bdev->boot) {
1020                         gpiod_set_value_cansleep(bdev->boot, 1);
1021                 } else {
1022                         /* Switch to the specific pin state for the booting
1023                          * requires.
1024                          */
1025                         pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
1026                 }
1027
1028                 /* Power on */
1029                 err = regulator_enable(bdev->vcc);
1030                 if (err < 0)
1031                         goto err_clk_disable_unprepare;
1032
1033                 /* Reset if the reset-gpios is available otherwise the board
1034                  * -level design should be guaranteed.
1035                  */
1036                 if (bdev->reset) {
1037                         gpiod_set_value_cansleep(bdev->reset, 1);
1038                         usleep_range(1000, 2000);
1039                         gpiod_set_value_cansleep(bdev->reset, 0);
1040                 }
1041
1042                 /* Wait some time until device got ready and switch to the pin
1043                  * mode the device requires for UART transfers.
1044                  */
1045                 msleep(50);
1046
1047                 if (bdev->boot)
1048                         devm_gpiod_put(&serdev->dev, bdev->boot);
1049
1050                 pinctrl_select_state(bdev->pinctrl, bdev->pins_runtime);
1051
1052                 /* A standalone device doesn't depends on power domain on SoC,
1053                  * so mark it as no callbacks.
1054                  */
1055                 pm_runtime_no_callbacks(&serdev->dev);
1056
1057                 set_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
1058         }
1059
1060         err = hci_register_dev(hdev);
1061         if (err < 0) {
1062                 dev_err(&serdev->dev, "Can't register HCI device\n");
1063                 goto err_regulator_disable;
1064         }
1065
1066         return 0;
1067
1068 err_regulator_disable:
1069         if (btmtkuart_is_standalone(bdev))
1070                 regulator_disable(bdev->vcc);
1071 err_clk_disable_unprepare:
1072         if (btmtkuart_is_standalone(bdev))
1073                 clk_disable_unprepare(bdev->osc);
1074 err_hci_free_dev:
1075         hci_free_dev(hdev);
1076
1077         return err;
1078 }
1079
1080 static void btmtkuart_remove(struct serdev_device *serdev)
1081 {
1082         struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
1083         struct hci_dev *hdev = bdev->hdev;
1084
1085         if (btmtkuart_is_standalone(bdev)) {
1086                 regulator_disable(bdev->vcc);
1087                 clk_disable_unprepare(bdev->osc);
1088         }
1089
1090         hci_unregister_dev(hdev);
1091         hci_free_dev(hdev);
1092 }
1093
1094 static const struct btmtkuart_data mt7622_data = {
1095         .fwname = FIRMWARE_MT7622,
1096 };
1097
1098 static const struct btmtkuart_data mt7663_data = {
1099         .flags = BTMTKUART_FLAG_STANDALONE_HW,
1100         .fwname = FIRMWARE_MT7663,
1101 };
1102
1103 static const struct btmtkuart_data mt7668_data = {
1104         .flags = BTMTKUART_FLAG_STANDALONE_HW,
1105         .fwname = FIRMWARE_MT7668,
1106 };
1107
1108 #ifdef CONFIG_OF
1109 static const struct of_device_id mtk_of_match_table[] = {
1110         { .compatible = "mediatek,mt7622-bluetooth", .data = &mt7622_data},
1111         { .compatible = "mediatek,mt7663u-bluetooth", .data = &mt7663_data},
1112         { .compatible = "mediatek,mt7668u-bluetooth", .data = &mt7668_data},
1113         { }
1114 };
1115 MODULE_DEVICE_TABLE(of, mtk_of_match_table);
1116 #endif
1117
1118 static struct serdev_device_driver btmtkuart_driver = {
1119         .probe = btmtkuart_probe,
1120         .remove = btmtkuart_remove,
1121         .driver = {
1122                 .name = "btmtkuart",
1123                 .of_match_table = of_match_ptr(mtk_of_match_table),
1124         },
1125 };
1126
1127 module_serdev_device_driver(btmtkuart_driver);
1128
1129 MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
1130 MODULE_DESCRIPTION("MediaTek Bluetooth Serial driver ver " VERSION);
1131 MODULE_VERSION(VERSION);
1132 MODULE_LICENSE("GPL");
1133 MODULE_FIRMWARE(FIRMWARE_MT7622);
1134 MODULE_FIRMWARE(FIRMWARE_MT7663);
1135 MODULE_FIRMWARE(FIRMWARE_MT7668);