Merge tag 'v5.18'
[linux-2.6-microblaze.git] / drivers / block / paride / bpck.c
1 /* 
2         bpck.c  (c) 1996-8  Grant R. Guenther <grant@torque.net>
3                             Under the terms of the GNU General Public License.
4
5         bpck.c is a low-level protocol driver for the MicroSolutions 
6         "backpack" parallel port IDE adapter.  
7
8 */
9
10 /* Changes:
11
12         1.01    GRG 1998.05.05 init_proto, release_proto, pi->delay 
13         1.02    GRG 1998.08.15 default pi->delay returned to 4
14
15 */
16
17 #define BPCK_VERSION    "1.02" 
18
19 #include <linux/module.h>
20 #include <linux/init.h>
21 #include <linux/delay.h>
22 #include <linux/kernel.h>
23 #include <linux/types.h>
24 #include <linux/wait.h>
25 #include <asm/io.h>
26
27 #include "paride.h"
28
29 #undef r2
30 #undef w2
31 #undef PC
32
33 #define PC                      pi->private
34 #define r2()                    (PC=(in_p(2) & 0xff))
35 #define w2(byte)                {out_p(2,byte); PC = byte;}
36 #define t2(pat)                 {PC ^= pat; out_p(2,PC);}
37 #define e2()                    {PC &= 0xfe; out_p(2,PC);}
38 #define o2()                    {PC |= 1; out_p(2,PC);}
39
40 #define j44(l,h)     (((l>>3)&0x7)|((l>>4)&0x8)|((h<<1)&0x70)|(h&0x80))
41
42 /* cont = 0 - access the IDE register file 
43    cont = 1 - access the IDE command set 
44    cont = 2 - use internal bpck register addressing
45 */
46
47 static int  cont_map[3] = { 0x40, 0x48, 0 };
48
49 static int bpck_read_regr( PIA *pi, int cont, int regr )
50
51 {       int r, l, h;
52
53         r = regr + cont_map[cont];
54
55         switch (pi->mode) {
56
57         case 0: w0(r & 0xf); w0(r); t2(2); t2(4);
58                 l = r1();
59                 t2(4);
60                 h = r1();
61                 return j44(l,h);
62
63         case 1: w0(r & 0xf); w0(r); t2(2);
64                 e2(); t2(0x20);
65                 t2(4); h = r0();
66                 t2(1); t2(0x20);
67                 return h;
68
69         case 2:
70         case 3:
71         case 4: w0(r); w2(9); w2(0); w2(0x20);
72                 h = r4();
73                 w2(0);
74                 return h;
75
76         }
77         return -1;
78 }       
79
80 static void bpck_write_regr( PIA *pi, int cont, int regr, int val )
81
82 {       int     r;
83
84         r = regr + cont_map[cont];
85
86         switch (pi->mode) {
87
88         case 0:
89         case 1: w0(r);
90                 t2(2);
91                 w0(val);
92                 o2(); t2(4); t2(1);
93                 break;
94
95         case 2:
96         case 3:
97         case 4: w0(r); w2(9); w2(0);
98                 w0(val); w2(1); w2(3); w2(0);
99                 break;
100
101         }
102 }
103
104 /* These macros access the bpck registers in native addressing */
105
106 #define WR(r,v)         bpck_write_regr(pi,2,r,v)
107 #define RR(r)           (bpck_read_regr(pi,2,r))
108
109 static void bpck_write_block( PIA *pi, char * buf, int count )
110
111 {       int i;
112
113         switch (pi->mode) {
114
115         case 0: WR(4,0x40);
116                 w0(0x40); t2(2); t2(1);
117                 for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
118                 WR(4,0);
119                 break;
120
121         case 1: WR(4,0x50);
122                 w0(0x40); t2(2); t2(1);
123                 for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
124                 WR(4,0x10);
125                 break;
126
127         case 2: WR(4,0x48);
128                 w0(0x40); w2(9); w2(0); w2(1);
129                 for (i=0;i<count;i++) w4(buf[i]);
130                 w2(0);
131                 WR(4,8);
132                 break;
133
134         case 3: WR(4,0x48);
135                 w0(0x40); w2(9); w2(0); w2(1);
136                 for (i=0;i<count/2;i++) w4w(((u16 *)buf)[i]);
137                 w2(0);
138                 WR(4,8);
139                 break;
140  
141         case 4: WR(4,0x48);
142                 w0(0x40); w2(9); w2(0); w2(1);
143                 for (i=0;i<count/4;i++) w4l(((u32 *)buf)[i]);
144                 w2(0);
145                 WR(4,8);
146                 break;
147         }
148 }
149
150 static void bpck_read_block( PIA *pi, char * buf, int count )
151
152 {       int i, l, h;
153
154         switch (pi->mode) {
155
156         case 0: WR(4,0x40);
157                 w0(0x40); t2(2);
158                 for (i=0;i<count;i++) {
159                     t2(4); l = r1();
160                     t2(4); h = r1();
161                     buf[i] = j44(l,h);
162                 }
163                 WR(4,0);
164                 break;
165
166         case 1: WR(4,0x50);
167                 w0(0x40); t2(2); t2(0x20);
168                 for(i=0;i<count;i++) { t2(4); buf[i] = r0(); }
169                 t2(1); t2(0x20);
170                 WR(4,0x10);
171                 break;
172
173         case 2: WR(4,0x48);
174                 w0(0x40); w2(9); w2(0); w2(0x20);
175                 for (i=0;i<count;i++) buf[i] = r4();
176                 w2(0);
177                 WR(4,8);
178                 break;
179
180         case 3: WR(4,0x48);
181                 w0(0x40); w2(9); w2(0); w2(0x20);
182                 for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
183                 w2(0);
184                 WR(4,8);
185                 break;
186
187         case 4: WR(4,0x48);
188                 w0(0x40); w2(9); w2(0); w2(0x20);
189                 for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
190                 w2(0);
191                 WR(4,8);
192                 break;
193
194         }
195 }
196
197 static int bpck_probe_unit ( PIA *pi )
198
199 {       int o1, o0, f7, id;
200         int t, s;
201
202         id = pi->unit;
203         s = 0;
204         w2(4); w2(0xe); r2(); t2(2); 
205         o1 = r1()&0xf8;
206         o0 = r0();
207         w0(255-id); w2(4); w0(id);
208         t2(8); t2(8); t2(8);
209         t2(2); t = r1()&0xf8;
210         f7 = ((id % 8) == 7);
211         if ((f7) || (t != o1)) { t2(2); s = r1()&0xf8; }
212         if ((t == o1) && ((!f7) || (s == o1)))  {
213                 w2(0x4c); w0(o0);
214                 return 0;       
215         }
216         t2(8); w0(0); t2(2); w2(0x4c); w0(o0);
217         return 1;
218 }
219         
220 static void bpck_connect ( PIA *pi  )
221
222 {       pi->saved_r0 = r0();
223         w0(0xff-pi->unit); w2(4); w0(pi->unit);
224         t2(8); t2(8); t2(8); 
225         t2(2); t2(2);
226         
227         switch (pi->mode) {
228
229         case 0: t2(8); WR(4,0);
230                 break;
231
232         case 1: t2(8); WR(4,0x10);
233                 break;
234
235         case 2:
236         case 3:
237         case 4: w2(0); WR(4,8);
238                 break;
239
240         }
241
242         WR(5,8);
243
244         if (pi->devtype == PI_PCD) {
245                 WR(0x46,0x10);          /* fiddle with ESS logic ??? */
246                 WR(0x4c,0x38);
247                 WR(0x4d,0x88);
248                 WR(0x46,0xa0);
249                 WR(0x41,0);
250                 WR(0x4e,8);
251                 }
252 }
253
254 static void bpck_disconnect ( PIA *pi )
255
256 {       w0(0); 
257         if (pi->mode >= 2) { w2(9); w2(0); } else t2(2);
258         w2(0x4c); w0(pi->saved_r0);
259
260
261 static void bpck_force_spp ( PIA *pi )
262
263 /* This fakes the EPP protocol to turn off EPP ... */
264
265 {       pi->saved_r0 = r0();
266         w0(0xff-pi->unit); w2(4); w0(pi->unit);
267         t2(8); t2(8); t2(8); 
268         t2(2); t2(2);
269
270         w2(0); 
271         w0(4); w2(9); w2(0); 
272         w0(0); w2(1); w2(3); w2(0);     
273         w0(0); w2(9); w2(0);
274         w2(0x4c); w0(pi->saved_r0);
275 }
276
277 #define TEST_LEN  16
278
279 static int bpck_test_proto( PIA *pi, char * scratch, int verbose )
280
281 {       int i, e, l, h, om;
282         char buf[TEST_LEN];
283
284         bpck_force_spp(pi);
285
286         switch (pi->mode) {
287
288         case 0: bpck_connect(pi);
289                 WR(0x13,0x7f);
290                 w0(0x13); t2(2);
291                 for(i=0;i<TEST_LEN;i++) {
292                     t2(4); l = r1();
293                     t2(4); h = r1();
294                     buf[i] = j44(l,h);
295                 }
296                 bpck_disconnect(pi);
297                 break;
298
299         case 1: bpck_connect(pi);
300                 WR(0x13,0x7f);
301                 w0(0x13); t2(2); t2(0x20);
302                 for(i=0;i<TEST_LEN;i++) { t2(4); buf[i] = r0(); }
303                 t2(1); t2(0x20);
304                 bpck_disconnect(pi);
305                 break;
306
307         case 2:
308         case 3:
309         case 4: om = pi->mode;
310                 pi->mode = 0;
311                 bpck_connect(pi);
312                 WR(7,3);
313                 WR(4,8);
314                 bpck_disconnect(pi);
315
316                 pi->mode = om;
317                 bpck_connect(pi);
318                 w0(0x13); w2(9); w2(1); w0(0); w2(3); w2(0); w2(0xe0);
319
320                 switch (pi->mode) {
321                   case 2: for (i=0;i<TEST_LEN;i++) buf[i] = r4();
322                           break;
323                   case 3: for (i=0;i<TEST_LEN/2;i++) ((u16 *)buf)[i] = r4w();
324                           break;
325                   case 4: for (i=0;i<TEST_LEN/4;i++) ((u32 *)buf)[i] = r4l();
326                           break;
327                 }
328
329                 w2(0);
330                 WR(7,0);
331                 bpck_disconnect(pi);
332
333                 break;
334
335         }
336
337         if (verbose) {
338             printk("%s: bpck: 0x%x unit %d mode %d: ",
339                    pi->device,pi->port,pi->unit,pi->mode);
340             for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]);
341             printk("\n");
342         }
343
344         e = 0;
345         for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++;
346         return e;
347 }
348
349 static void bpck_read_eeprom ( PIA *pi, char * buf )
350
351 {       int i, j, k, p, v, f, om, od;
352
353         bpck_force_spp(pi);
354
355         om = pi->mode;  od = pi->delay;
356         pi->mode = 0; pi->delay = 6;
357
358         bpck_connect(pi);
359         
360         WR(4,0);
361         for (i=0;i<64;i++) {
362             WR(6,8);  
363             WR(6,0xc);
364             p = 0x100;
365             for (k=0;k<9;k++) {
366                 f = (((i + 0x180) & p) != 0) * 2;
367                 WR(6,f+0xc); 
368                 WR(6,f+0xd); 
369                 WR(6,f+0xc);
370                 p = (p >> 1);
371             }
372             for (j=0;j<2;j++) {
373                 v = 0;
374                 for (k=0;k<8;k++) {
375                     WR(6,0xc); 
376                     WR(6,0xd); 
377                     WR(6,0xc); 
378                     f = RR(0);
379                     v = 2*v + (f == 0x84);
380                 }
381                 buf[2*i+1-j] = v;
382             }
383         }
384         WR(6,8);
385         WR(6,0);
386         WR(5,8);
387
388         bpck_disconnect(pi);
389
390         if (om >= 2) {
391                 bpck_connect(pi);
392                 WR(7,3);
393                 WR(4,8);
394                 bpck_disconnect(pi);
395         }
396
397         pi->mode = om; pi->delay = od;
398 }
399
400 static int bpck_test_port ( PIA *pi )   /* check for 8-bit port */
401
402 {       int     i, r, m;
403
404         w2(0x2c); i = r0(); w0(255-i); r = r0(); w0(i);
405         m = -1;
406         if (r == i) m = 2;
407         if (r == (255-i)) m = 0;
408
409         w2(0xc); i = r0(); w0(255-i); r = r0(); w0(i);
410         if (r != (255-i)) m = -1;
411         
412         if (m == 0) { w2(6); w2(0xc); r = r0(); w0(0xaa); w0(r); w0(0xaa); }
413         if (m == 2) { w2(0x26); w2(0xc); }
414
415         if (m == -1) return 0;
416         return 5;
417 }
418
419 static void bpck_log_adapter( PIA *pi, char * scratch, int verbose )
420
421 {       char    *mode_string[5] = { "4-bit","8-bit","EPP-8",
422                                     "EPP-16","EPP-32" };
423
424 #ifdef DUMP_EEPROM
425         int i;
426 #endif
427
428         bpck_read_eeprom(pi,scratch);
429
430 #ifdef DUMP_EEPROM
431         if (verbose) {
432            for(i=0;i<128;i++)
433                 if ((scratch[i] < ' ') || (scratch[i] > '~'))
434                     scratch[i] = '.';
435            printk("%s: bpck EEPROM: %64.64s\n",pi->device,scratch);
436            printk("%s:              %64.64s\n",pi->device,&scratch[64]);
437         }
438 #endif
439
440         printk("%s: bpck %s, backpack %8.8s unit %d",
441                 pi->device,BPCK_VERSION,&scratch[110],pi->unit);
442         printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port,
443                 pi->mode,mode_string[pi->mode],pi->delay);
444 }
445
446 static struct pi_protocol bpck = {
447         .owner          = THIS_MODULE,
448         .name           = "bpck",
449         .max_mode       = 5,
450         .epp_first      = 2,
451         .default_delay  = 4,
452         .max_units      = 255,
453         .write_regr     = bpck_write_regr,
454         .read_regr      = bpck_read_regr,
455         .write_block    = bpck_write_block,
456         .read_block     = bpck_read_block,
457         .connect        = bpck_connect,
458         .disconnect     = bpck_disconnect,
459         .test_port      = bpck_test_port,
460         .probe_unit     = bpck_probe_unit,
461         .test_proto     = bpck_test_proto,
462         .log_adapter    = bpck_log_adapter,
463 };
464
465 static int __init bpck_init(void)
466 {
467         return paride_register(&bpck);
468 }
469
470 static void __exit bpck_exit(void)
471 {
472         paride_unregister(&bpck);
473 }
474
475 MODULE_LICENSE("GPL");
476 module_init(bpck_init)
477 module_exit(bpck_exit)