2 # SATA/PATA driver configuration
5 config HAVE_PATA_PLATFORM
8 This is an internal configuration node for any machine that
9 uses pata-platform driver to enable the relevant driver in the
10 configuration structure without having to submit endless patches
11 to update the PATA_PLATFORM entry.
14 tristate "Serial ATA and Parallel ATA drivers (libata)"
17 depends on !(M32R || M68K || S390) || BROKEN
20 If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
21 any other ATA device under Linux, say Y and make sure that you know
22 the name of your ATA host adapter (the card inside your computer
23 that "speaks" the ATA protocol, also called ATA controller),
24 because you will be asked for it.
26 NOTE: ATA enables basic SCSI support; *however*,
27 'SCSI disk support', 'SCSI tape support', or
28 'SCSI CDROM support' may also be needed,
29 depending on your hardware configuration.
33 config ATA_NONSTANDARD
37 config ATA_VERBOSE_ERROR
38 bool "Verbose ATA error reporting"
41 This option adds parsing of ATA command descriptions and error bits
42 in libata kernel output, making it easier to interpret.
43 This option will enlarge the kernel by approx. 6KB. Disable it only
44 if kernel size is more important than ease of debugging.
49 bool "ATA ACPI Support"
50 depends on ACPI && PCI
53 This option adds support for ATA-related ACPI objects.
54 These ACPI objects add the ability to retrieve taskfiles
55 from the ACPI BIOS and write them to the disk controller.
56 These objects may be related to performance, security,
57 power management, or other areas.
58 You can disable this at kernel boot time by using the
59 option libata.noacpi=1
62 bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
66 This option adds support for SATA Zero Power Optical Disc
67 Drive (ZPODD). It requires both the ODD and the platform
68 support, and if enabled, will automatically power on/off the
69 ODD when certain condition is satisfied. This does not impact
70 end user's experience of the ODD, only power is saved when
71 the ODD is not in use (i.e. no disc inside).
76 bool "SATA Port Multiplier support"
79 This option adds support for SATA Port Multipliers
80 (the SATA version of an ethernet hub, or SAS expander).
82 comment "Controllers with non-SFF native interface"
85 tristate "AHCI SATA support"
88 This option enables support for AHCI Serial ATA.
92 config SATA_AHCI_PLATFORM
93 tristate "Platform AHCI SATA support"
95 This option enables support for Platform AHCI Serial ATA
101 tristate "ST AHCI SATA support"
102 depends on SATA_AHCI_PLATFORM
104 This option enables support for ST AHCI SATA controller.
109 tristate "Freescale i.MX AHCI SATA support"
110 depends on SATA_AHCI_PLATFORM && MFD_SYSCON
112 This option enables support for the Freescale i.MX SoC's
118 tristate "Allwinner sunxi AHCI SATA support"
119 depends on ARCH_SUNXI && SATA_AHCI_PLATFORM
121 This option enables support for the Allwinner sunxi SoC's
127 tristate "Freescale 3.0Gbps SATA support"
130 This option enables support for Freescale 3.0Gbps SATA controller.
131 It can be found on MPC837x and MPC8315.
136 tristate "Initio 162x SATA support (Very Experimental)"
139 This option enables support for Initio 162x Serial ATA.
141 config SATA_ACARD_AHCI
142 tristate "ACard AHCI variant (ATP 8620)"
145 This option enables support for Acard.
150 tristate "Silicon Image 3124/3132 SATA support"
153 This option enables support for Silicon Image 3124/3132 Serial ATA.
158 bool "ATA SFF support (for legacy IDE and PATA)"
161 This option adds support for ATA controllers with SFF
162 compliant or similar programming interface.
164 SFF is the legacy IDE interface that has been around since
165 the dawn of time. Almost all PATA controllers have an
166 SFF interface. Many SATA controllers have an SFF interface
167 when configured into a legacy compatibility mode.
169 For users with exclusively modern controllers like AHCI,
170 Silicon Image 3124, or Marvell 6440, you may choose to
171 disable this unneeded SFF support.
177 comment "SFF controllers with custom DMA interface"
180 tristate "Pacific Digital ADMA support"
183 This option enables support for Pacific Digital ADMA controllers
187 config PATA_OCTEON_CF
188 tristate "OCTEON Boot Bus Compact Flash support"
189 depends on CAVIUM_OCTEON_SOC
191 This option enables a polled compact flash driver for use with
192 compact flash cards attached to the OCTEON boot bus.
197 tristate "Pacific Digital SATA QStor support"
200 This option enables support for Pacific Digital Serial ATA QStor.
205 tristate "Promise SATA SX4 support (Experimental)"
208 This option enables support for Promise Serial ATA SX4.
213 bool "ATA BMDMA support"
216 This option adds support for SFF ATA controllers with BMDMA
217 capability. BMDMA stands for bus-master DMA and is the
218 de facto DMA interface for SFF controllers.
224 comment "SATA SFF controllers with BMDMA"
227 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
230 This option enables support for ICH5/6/7/8 Serial ATA
231 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
237 tristate "DesignWare Cores SATA support"
240 This option enables support for the on-chip SATA controller of the
241 AppliedMicro processor 460EX.
245 config SATA_DWC_DEBUG
246 bool "Debugging driver version"
249 This option enables debugging output in the driver.
251 config SATA_DWC_VDEBUG
252 bool "Verbose debug output"
253 depends on SATA_DWC_DEBUG
255 This option enables the taskfile dumping and NCQ debugging.
258 tristate "Calxeda Highbank SATA support"
260 This option enables support for the Calxeda Highbank SoC's
266 tristate "Marvell SATA support"
268 This option enables support for the Marvell Serial ATA family.
269 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
270 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
275 tristate "NVIDIA SATA support"
278 This option enables support for NVIDIA Serial ATA.
283 tristate "Promise SATA TX2/TX4 support"
286 This option enables support for Promise Serial ATA TX2/TX4.
291 tristate "Renesas R-Car SATA support"
293 This option enables support for Renesas R-Car Serial ATA.
298 tristate "Silicon Image SATA support"
301 This option enables support for Silicon Image Serial ATA.
306 tristate "SiS 964/965/966/180 SATA support"
310 This option enables support for SiS Serial ATA on
311 SiS 964/965/966/180 and Parallel ATA on SiS 180.
312 The PATA support for SiS 180 requires additionally to
313 enable the PATA_SIS driver in the config.
317 tristate "ServerWorks Frodo / Apple K2 SATA support"
320 This option enables support for Broadcom/Serverworks/Apple K2
326 tristate "ULi Electronics SATA support"
329 This option enables support for ULi Electronics SATA.
334 tristate "VIA SATA support"
337 This option enables support for VIA Serial ATA.
342 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
345 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
349 comment "PATA SFF controllers with BMDMA"
352 tristate "ALi PATA support"
355 This option enables support for the ALi ATA interfaces
356 found on the many ALi chipsets.
361 tristate "AMD/NVidia PATA support"
364 This option enables support for the AMD and NVidia PATA
365 interfaces found on the chipsets for Athlon/Athlon64.
369 config PATA_ARASAN_CF
370 tristate "ARASAN CompactFlash PATA Controller Support"
371 depends on DMADEVICES
374 Say Y here to support the ARASAN CompactFlash PATA controller
377 tristate "ARTOP 6210/6260 PATA support"
380 This option enables support for ARTOP PATA controllers.
385 tristate "ATI PATA support"
388 This option enables support for the ATI ATA interfaces
389 found on the many ATI chipsets.
394 tristate "ARTOP/Acard ATP867X PATA support"
397 This option enables support for ARTOP/Acard ATP867X PATA
403 tristate "Blackfin 54x ATAPI support"
404 depends on BF542 || BF548 || BF549
406 This option enables support for the built-in ATAPI controller on
407 Blackfin 54x family chips.
412 tristate "CMD64x PATA support"
415 This option enables support for the CMD64x series chips
416 except for the CMD640.
421 tristate "CS5510/5520 PATA support"
422 depends on PCI && (X86_32 || COMPILE_TEST)
424 This option enables support for the Cyrix 5510/5520
425 companion chip used with the MediaGX/Geode processor family.
430 tristate "CS5530 PATA support"
431 depends on PCI && (X86_32 || COMPILE_TEST)
433 This option enables support for the Cyrix/NatSemi/AMD CS5530
434 companion chip used with the MediaGX/Geode processor family.
439 tristate "CS5535 PATA support (Experimental)"
440 depends on PCI && X86_32
442 This option enables support for the NatSemi/AMD CS5535
443 companion chip used with the Geode processor family.
448 tristate "CS5536 PATA support"
449 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
451 This option enables support for the AMD CS5536
452 companion chip used with the Geode LX processor family.
457 tristate "Cypress CY82C693 PATA support (Very Experimental)"
460 This option enables support for the Cypress/Contaq CY82C693
461 chipset found in some Alpha systems
466 tristate "EFAR SLC90E66 support"
469 This option enables support for the EFAR SLC90E66
470 IDE controller found on some older machines.
475 tristate "Cirrus Logic EP93xx PATA support"
476 depends on ARCH_EP93XX
478 This option enables support for the PATA controller in
479 the Cirrus Logic EP9312 and EP9315 ARM CPU.
484 tristate "HPT 366/368 PATA support"
487 This option enables support for the HPT 366 and 368
488 PATA controllers via the new ATA layer.
493 tristate "HPT 370/370A/371/372/374/302 PATA support"
496 This option enables support for the majority of the later HPT
497 PATA controllers via the new ATA layer.
502 tristate "HPT 371N/372N/302N PATA support"
505 This option enables support for the N variant HPT PATA
506 controllers via the new ATA layer.
511 tristate "HPT 343/363 PATA support"
514 This option enables support for the HPT 343/363
515 PATA controllers via the new ATA layer
519 config PATA_HPT3X3_DMA
520 bool "HPT 343/363 DMA support"
521 depends on PATA_HPT3X3
523 This option enables DMA support for the HPT343/363
524 controllers. Enable with care as there are still some
525 problems with DMA on this chipset.
528 tristate "Acorn ICS PATA support"
529 depends on ARM && ARCH_ACORN
531 On Acorn systems, say Y here if you wish to use the ICS PATA
532 interface card. This is not required for ICS partition support.
533 If you are unsure, say N to this.
536 tristate "PATA support for Freescale iMX"
539 This option enables support for the PATA host available on Freescale
545 tristate "IT8213 PATA support (Experimental)"
548 This option enables support for the ITE 821 PATA
549 controllers via the new ATA layer.
554 tristate "IT8211/2 PATA support"
557 This option enables support for the ITE 8211 and 8212
558 PATA controllers via the new ATA layer, including RAID
564 tristate "JMicron PATA support"
567 Enable support for the JMicron IDE controller, via the new
573 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
576 Most IDE capable PowerMacs have IDE busses driven by a variant
577 of this controller which is part of the Apple chipset used on
578 most PowerMac models. Some models have multiple busses using
579 different chipsets, though generally, MacIO is one of them.
582 tristate "Marvell PATA support via legacy mode"
585 This option enables limited support for the Marvell 88SE61xx ATA
586 controllers. If you wish to use only the SATA ports then select
587 the AHCI driver alone. If you wish to the use the PATA port or
588 both SATA and PATA include this driver.
593 tristate "Freescale MPC52xx SoC internal IDE"
594 depends on PPC_MPC52xx && PPC_BESTCOMM
595 select PPC_BESTCOMM_ATA
597 This option enables support for integrated IDE controller
598 of the Freescale MPC52xx SoC.
603 tristate "NETCELL Revolution RAID support"
606 This option enables support for the Netcell Revolution RAID
612 tristate "Ninja32/Delkin Cardbus ATA support"
615 This option enables support for the Ninja32, Delkin and
616 possibly other brands of Cardbus ATA adapter
621 tristate "Nat Semi NS87415 PATA support"
624 This option enables support for the National Semiconductor
625 NS87415 PCI-IDE controller.
630 tristate "Intel PATA old PIIX support"
633 This option enables support for early PIIX PATA support.
638 tristate "OPTI FireStar PATA support (Very Experimental)"
641 This option enables DMA/PIO support for the later OPTi
642 controllers found on some old motherboards and in some
648 tristate "Promise PATA 2027x support"
651 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
656 tristate "Older Promise PATA controller support"
659 This option enables support for the Promise 20246, 20262, 20263,
660 20265 and 20267 adapters.
665 tristate "RADISYS 82600 PATA support (Experimental)"
668 This option enables support for the RADISYS 82600
669 PATA controllers via the new ATA layer
674 tristate "RDC PATA support"
677 This option enables basic support for the later RDC PATA controllers
678 controllers via the new ATA layer. For the RDC 1010, you need to
679 enable the IT821X driver instead.
684 tristate "SC1200 PATA support"
687 This option enables support for the NatSemi/AMD SC1200 SoC
688 companion chip used with the Geode processor family.
693 tristate "Toshiba's Cell Reference Set IDE support"
694 depends on PCI && PPC_CELLEB
696 This option enables support for the built-in IDE controller on
697 Toshiba Cell Reference Board.
702 tristate "Intel SCH PATA support"
705 This option enables support for Intel SCH PATA on the Intel
706 SCH (US15W, US15L, UL11L) series host controllers.
710 config PATA_SERVERWORKS
711 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
714 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
715 HT1000 PATA controllers, via the new ATA layer.
720 tristate "CMD / Silicon Image 680 PATA support"
723 This option enables support for CMD / Silicon Image 680 PATA.
728 tristate "SiS PATA support"
731 This option enables support for SiS PATA controllers
736 tristate "Toshiba Piccolo support (Experimental)"
739 Support for the Toshiba Piccolo controllers. Currently only the
740 primary channel is supported by this driver.
745 tristate "Compaq Triflex PATA support"
748 Enable support for the Compaq 'Triflex' IDE controller as found
749 on many Compaq Pentium-Pro systems, via the new ATA layer.
754 tristate "VIA PATA support"
757 This option enables support for the VIA PATA interfaces
758 found on the many VIA chipsets.
763 tristate "PXA DMA-capable PATA support"
766 This option enables support for harddrive attached to PXA CPU's bus.
768 NOTE: This driver utilizes PXA DMA controller, in case your hardware
769 is not capable of doing MWDMA, use pata_platform instead.
774 tristate "Winbond SL82C105 PATA support"
777 This option enables support for SL82C105 PATA devices found in the
778 Netwinder and some other systems
784 comment "PIO-only SFF controllers"
787 tristate "Atmel AVR32 PATA support (Experimental)"
788 depends on AVR32 && PLATFORM_AT32AP
790 This option enables support for the IDE devices on the
791 Atmel AT32AP platform.
796 tristate "PATA support for AT91SAM9260"
797 depends on ARM && ARCH_AT91
799 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
803 config PATA_CMD640_PCI
804 tristate "CMD640 PCI PATA support (Experimental)"
807 This option enables support for the CMD640 PCI IDE
808 interface chip. Only the primary channel is currently
814 tristate "ISA Plug and Play PATA support"
817 This option enables support for ISA plug & play ATA
818 controllers such as those found on old soundcards.
822 config PATA_IXP4XX_CF
823 tristate "IXP4XX Compact Flash support"
824 depends on ARCH_IXP4XX
826 This option enables support for a Compact Flash connected on
827 the ixp4xx expansion bus. This driver had been written for
828 Loft/Avila boards in mind but can work with others.
833 tristate "Intel PATA MPIIX support"
836 This option enables support for MPIIX PATA support.
841 tristate "Nat Semi NS87410 PATA support"
844 This option enables support for the National Semiconductor
845 NS87410 PCI-IDE controller.
850 tristate "OPTI621/6215 PATA support (Very Experimental)"
853 This option enables full PIO support for the early Opti ATA
854 controllers found on some old motherboards.
859 tristate "Palm LifeDrive PATA support"
860 depends on MACH_PALMLD
862 This option enables support for Palm LifeDrive's internal ATA
863 port via the new ATA layer.
868 tristate "PCMCIA PATA support"
871 This option enables support for PCMCIA ATA interfaces, including
872 compact flash card adapters via the new ATA layer.
877 tristate "Generic platform device PATA support"
878 depends on EXPERT || PPC || HAVE_PATA_PLATFORM
880 This option enables support for generic directly connected ATA
881 devices commonly found on embedded systems.
885 config PATA_OF_PLATFORM
886 tristate "OpenFirmware platform device PATA support"
887 depends on PATA_PLATFORM && OF
889 This option enables support for generic directly connected ATA
890 devices commonly found on embedded systems with OpenFirmware
896 tristate "QDI VLB PATA support"
900 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
903 tristate "RouterBoard 532 PATA CompactFlash support"
904 depends on MIKROTIK_RB532
906 This option enables support for the RouterBoard 532
907 PATA CompactFlash controller.
912 tristate "PC Tech RZ1000 PATA support"
915 This option enables basic support for the PC Tech RZ1000/1
916 PATA controllers via the new ATA layer
920 config PATA_SAMSUNG_CF
921 tristate "Samsung SoC PATA support"
922 depends on SAMSUNG_DEV_IDE
924 This option enables basic support for Samsung's S3C/S5P board
925 PATA controllers via the new ATA layer
929 config PATA_WINBOND_VLB
930 tristate "Winbond W83759A VLB PATA support (Experimental)"
934 Support for the Winbond W83759A controller on Vesa Local Bus
937 comment "Generic fallback / legacy drivers"
940 tristate "ACPI firmware driver for PATA"
941 depends on ATA_ACPI && ATA_BMDMA
943 This option enables an ACPI method driver which drives
944 motherboard PATA controller interfaces through the ACPI
945 firmware in the BIOS. This driver can sometimes handle
946 otherwise unsupported hardware.
949 tristate "Generic ATA support"
950 depends on PCI && ATA_BMDMA
952 This option enables support for generic BIOS configured
953 ATA controllers via the new ATA layer
958 tristate "Legacy ISA PATA support (Experimental)"
959 depends on (ISA || PCI)
961 This option enables support for ISA/VLB/PCI bus legacy PATA
962 ports and allows them to be accessed via the new ATA layer.