1 #include <linux/bootmem.h>
2 #include <linux/linkage.h>
3 #include <linux/bitops.h>
4 #include <linux/kernel.h>
5 #include <linux/export.h>
6 #include <linux/percpu.h>
7 #include <linux/string.h>
8 #include <linux/ctype.h>
9 #include <linux/delay.h>
10 #include <linux/sched/mm.h>
11 #include <linux/sched/clock.h>
12 #include <linux/sched/task.h>
13 #include <linux/init.h>
14 #include <linux/kprobes.h>
15 #include <linux/kgdb.h>
16 #include <linux/smp.h>
18 #include <linux/syscore_ops.h>
20 #include <asm/stackprotector.h>
21 #include <asm/perf_event.h>
22 #include <asm/mmu_context.h>
23 #include <asm/archrandom.h>
24 #include <asm/hypervisor.h>
25 #include <asm/processor.h>
26 #include <asm/tlbflush.h>
27 #include <asm/debugreg.h>
28 #include <asm/sections.h>
29 #include <asm/vsyscall.h>
30 #include <linux/topology.h>
31 #include <linux/cpumask.h>
32 #include <asm/pgtable.h>
33 #include <linux/atomic.h>
34 #include <asm/proto.h>
35 #include <asm/setup.h>
38 #include <asm/fpu/internal.h>
40 #include <asm/hwcap2.h>
41 #include <linux/numa.h>
48 #include <asm/microcode.h>
49 #include <asm/microcode_intel.h>
51 #ifdef CONFIG_X86_LOCAL_APIC
52 #include <asm/uv/uv.h>
57 u32 elf_hwcap2 __read_mostly;
59 /* all of these masks are initialized in setup_cpu_local_masks() */
60 cpumask_var_t cpu_initialized_mask;
61 cpumask_var_t cpu_callout_mask;
62 cpumask_var_t cpu_callin_mask;
64 /* representing cpus for which sibling maps can be computed */
65 cpumask_var_t cpu_sibling_setup_mask;
67 /* correctly size the local cpu masks */
68 void __init setup_cpu_local_masks(void)
70 alloc_bootmem_cpumask_var(&cpu_initialized_mask);
71 alloc_bootmem_cpumask_var(&cpu_callin_mask);
72 alloc_bootmem_cpumask_var(&cpu_callout_mask);
73 alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
76 static void default_init(struct cpuinfo_x86 *c)
79 cpu_detect_cache_sizes(c);
81 /* Not much we can do here... */
82 /* Check if at least it has cpuid */
83 if (c->cpuid_level == -1) {
84 /* No cpuid. It must be an ancient CPU */
86 strcpy(c->x86_model_id, "486");
88 strcpy(c->x86_model_id, "386");
93 static const struct cpu_dev default_cpu = {
94 .c_init = default_init,
95 .c_vendor = "Unknown",
96 .c_x86_vendor = X86_VENDOR_UNKNOWN,
99 static const struct cpu_dev *this_cpu = &default_cpu;
101 DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
104 * We need valid kernel segments for data and code in long mode too
105 * IRET will check the segment types kkeil 2000/10/28
106 * Also sysret mandates a special GDT layout
108 * TLS descriptors are currently at a different place compared to i386.
109 * Hopefully nobody expects them at a fixed place (Wine?)
111 [GDT_ENTRY_KERNEL32_CS] = GDT_ENTRY_INIT(0xc09b, 0, 0xfffff),
112 [GDT_ENTRY_KERNEL_CS] = GDT_ENTRY_INIT(0xa09b, 0, 0xfffff),
113 [GDT_ENTRY_KERNEL_DS] = GDT_ENTRY_INIT(0xc093, 0, 0xfffff),
114 [GDT_ENTRY_DEFAULT_USER32_CS] = GDT_ENTRY_INIT(0xc0fb, 0, 0xfffff),
115 [GDT_ENTRY_DEFAULT_USER_DS] = GDT_ENTRY_INIT(0xc0f3, 0, 0xfffff),
116 [GDT_ENTRY_DEFAULT_USER_CS] = GDT_ENTRY_INIT(0xa0fb, 0, 0xfffff),
118 [GDT_ENTRY_KERNEL_CS] = GDT_ENTRY_INIT(0xc09a, 0, 0xfffff),
119 [GDT_ENTRY_KERNEL_DS] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
120 [GDT_ENTRY_DEFAULT_USER_CS] = GDT_ENTRY_INIT(0xc0fa, 0, 0xfffff),
121 [GDT_ENTRY_DEFAULT_USER_DS] = GDT_ENTRY_INIT(0xc0f2, 0, 0xfffff),
123 * Segments used for calling PnP BIOS have byte granularity.
124 * They code segments and data segments have fixed 64k limits,
125 * the transfer segment sizes are set at run time.
128 [GDT_ENTRY_PNPBIOS_CS32] = GDT_ENTRY_INIT(0x409a, 0, 0xffff),
130 [GDT_ENTRY_PNPBIOS_CS16] = GDT_ENTRY_INIT(0x009a, 0, 0xffff),
132 [GDT_ENTRY_PNPBIOS_DS] = GDT_ENTRY_INIT(0x0092, 0, 0xffff),
134 [GDT_ENTRY_PNPBIOS_TS1] = GDT_ENTRY_INIT(0x0092, 0, 0),
136 [GDT_ENTRY_PNPBIOS_TS2] = GDT_ENTRY_INIT(0x0092, 0, 0),
138 * The APM segments have byte granularity and their bases
139 * are set at run time. All have 64k limits.
142 [GDT_ENTRY_APMBIOS_BASE] = GDT_ENTRY_INIT(0x409a, 0, 0xffff),
144 [GDT_ENTRY_APMBIOS_BASE+1] = GDT_ENTRY_INIT(0x009a, 0, 0xffff),
146 [GDT_ENTRY_APMBIOS_BASE+2] = GDT_ENTRY_INIT(0x4092, 0, 0xffff),
148 [GDT_ENTRY_ESPFIX_SS] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
149 [GDT_ENTRY_PERCPU] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
150 GDT_STACK_CANARY_INIT
153 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
155 static int __init x86_mpx_setup(char *s)
157 /* require an exact match without trailing characters */
161 /* do not emit a message if the feature is not present */
162 if (!boot_cpu_has(X86_FEATURE_MPX))
165 setup_clear_cpu_cap(X86_FEATURE_MPX);
166 pr_info("nompx: Intel Memory Protection Extensions (MPX) disabled\n");
169 __setup("nompx", x86_mpx_setup);
172 static int __init x86_nopcid_setup(char *s)
174 /* nopcid doesn't accept parameters */
178 /* do not emit a message if the feature is not present */
179 if (!boot_cpu_has(X86_FEATURE_PCID))
182 setup_clear_cpu_cap(X86_FEATURE_PCID);
183 pr_info("nopcid: PCID feature disabled\n");
186 early_param("nopcid", x86_nopcid_setup);
189 static int __init x86_noinvpcid_setup(char *s)
191 /* noinvpcid doesn't accept parameters */
195 /* do not emit a message if the feature is not present */
196 if (!boot_cpu_has(X86_FEATURE_INVPCID))
199 setup_clear_cpu_cap(X86_FEATURE_INVPCID);
200 pr_info("noinvpcid: INVPCID feature disabled\n");
203 early_param("noinvpcid", x86_noinvpcid_setup);
206 static int cachesize_override = -1;
207 static int disable_x86_serial_nr = 1;
209 static int __init cachesize_setup(char *str)
211 get_option(&str, &cachesize_override);
214 __setup("cachesize=", cachesize_setup);
216 static int __init x86_sep_setup(char *s)
218 setup_clear_cpu_cap(X86_FEATURE_SEP);
221 __setup("nosep", x86_sep_setup);
223 /* Standard macro to see if a specific flag is changeable */
224 static inline int flag_is_changeable_p(u32 flag)
229 * Cyrix and IDT cpus allow disabling of CPUID
230 * so the code below may return different results
231 * when it is executed before and after enabling
232 * the CPUID. Add "volatile" to not allow gcc to
233 * optimize the subsequent calls to this function.
235 asm volatile ("pushfl \n\t"
246 : "=&r" (f1), "=&r" (f2)
249 return ((f1^f2) & flag) != 0;
252 /* Probe for the CPUID instruction */
253 int have_cpuid_p(void)
255 return flag_is_changeable_p(X86_EFLAGS_ID);
258 static void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
260 unsigned long lo, hi;
262 if (!cpu_has(c, X86_FEATURE_PN) || !disable_x86_serial_nr)
265 /* Disable processor serial number: */
267 rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
269 wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
271 pr_notice("CPU serial number disabled.\n");
272 clear_cpu_cap(c, X86_FEATURE_PN);
274 /* Disabling the serial number may affect the cpuid level */
275 c->cpuid_level = cpuid_eax(0);
278 static int __init x86_serial_nr_setup(char *s)
280 disable_x86_serial_nr = 0;
283 __setup("serialnumber", x86_serial_nr_setup);
285 static inline int flag_is_changeable_p(u32 flag)
289 static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
294 static __init int setup_disable_smep(char *arg)
296 setup_clear_cpu_cap(X86_FEATURE_SMEP);
297 /* Check for things that depend on SMEP being enabled: */
298 check_mpx_erratum(&boot_cpu_data);
301 __setup("nosmep", setup_disable_smep);
303 static __always_inline void setup_smep(struct cpuinfo_x86 *c)
305 if (cpu_has(c, X86_FEATURE_SMEP))
306 cr4_set_bits(X86_CR4_SMEP);
309 static __init int setup_disable_smap(char *arg)
311 setup_clear_cpu_cap(X86_FEATURE_SMAP);
314 __setup("nosmap", setup_disable_smap);
316 static __always_inline void setup_smap(struct cpuinfo_x86 *c)
318 unsigned long eflags = native_save_fl();
320 /* This should have been cleared long ago */
321 BUG_ON(eflags & X86_EFLAGS_AC);
323 if (cpu_has(c, X86_FEATURE_SMAP)) {
324 #ifdef CONFIG_X86_SMAP
325 cr4_set_bits(X86_CR4_SMAP);
327 cr4_clear_bits(X86_CR4_SMAP);
332 static __always_inline void setup_umip(struct cpuinfo_x86 *c)
334 /* Check the boot processor, plus build option for UMIP. */
335 if (!cpu_feature_enabled(X86_FEATURE_UMIP))
338 /* Check the current processor's cpuid bits. */
339 if (!cpu_has(c, X86_FEATURE_UMIP))
342 cr4_set_bits(X86_CR4_UMIP);
344 pr_info("x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature\n");
350 * Make sure UMIP is disabled in case it was enabled in a
351 * previous boot (e.g., via kexec).
353 cr4_clear_bits(X86_CR4_UMIP);
357 * Protection Keys are not available in 32-bit mode.
359 static bool pku_disabled;
361 static __always_inline void setup_pku(struct cpuinfo_x86 *c)
363 /* check the boot processor, plus compile options for PKU: */
364 if (!cpu_feature_enabled(X86_FEATURE_PKU))
366 /* checks the actual processor's cpuid bits: */
367 if (!cpu_has(c, X86_FEATURE_PKU))
372 cr4_set_bits(X86_CR4_PKE);
374 * Seting X86_CR4_PKE will cause the X86_FEATURE_OSPKE
375 * cpuid bit to be set. We need to ensure that we
376 * update that bit in this CPU's "cpu_info".
381 #ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
382 static __init int setup_disable_pku(char *arg)
385 * Do not clear the X86_FEATURE_PKU bit. All of the
386 * runtime checks are against OSPKE so clearing the
389 * This way, we will see "pku" in cpuinfo, but not
390 * "ospke", which is exactly what we want. It shows
391 * that the CPU has PKU, but the OS has not enabled it.
392 * This happens to be exactly how a system would look
393 * if we disabled the config option.
395 pr_info("x86: 'nopku' specified, disabling Memory Protection Keys\n");
399 __setup("nopku", setup_disable_pku);
400 #endif /* CONFIG_X86_64 */
403 * Some CPU features depend on higher CPUID levels, which may not always
404 * be available due to CPUID level capping or broken virtualization
405 * software. Add those features to this table to auto-disable them.
407 struct cpuid_dependent_feature {
412 static const struct cpuid_dependent_feature
413 cpuid_dependent_features[] = {
414 { X86_FEATURE_MWAIT, 0x00000005 },
415 { X86_FEATURE_DCA, 0x00000009 },
416 { X86_FEATURE_XSAVE, 0x0000000d },
420 static void filter_cpuid_features(struct cpuinfo_x86 *c, bool warn)
422 const struct cpuid_dependent_feature *df;
424 for (df = cpuid_dependent_features; df->feature; df++) {
426 if (!cpu_has(c, df->feature))
429 * Note: cpuid_level is set to -1 if unavailable, but
430 * extended_extended_level is set to 0 if unavailable
431 * and the legitimate extended levels are all negative
432 * when signed; hence the weird messing around with
435 if (!((s32)df->level < 0 ?
436 (u32)df->level > (u32)c->extended_cpuid_level :
437 (s32)df->level > (s32)c->cpuid_level))
440 clear_cpu_cap(c, df->feature);
444 pr_warn("CPU: CPU feature " X86_CAP_FMT " disabled, no CPUID level 0x%x\n",
445 x86_cap_flag(df->feature), df->level);
450 * Naming convention should be: <Name> [(<Codename>)]
451 * This table only is used unless init_<vendor>() below doesn't set it;
452 * in particular, if CPUID levels 0x80000002..4 are supported, this
456 /* Look up CPU names by table lookup. */
457 static const char *table_lookup_model(struct cpuinfo_x86 *c)
460 const struct legacy_cpu_model_info *info;
462 if (c->x86_model >= 16)
463 return NULL; /* Range check */
468 info = this_cpu->legacy_models;
470 while (info->family) {
471 if (info->family == c->x86)
472 return info->model_names[c->x86_model];
476 return NULL; /* Not found */
479 __u32 cpu_caps_cleared[NCAPINTS + NBUGINTS];
480 __u32 cpu_caps_set[NCAPINTS + NBUGINTS];
482 void load_percpu_segment(int cpu)
485 loadsegment(fs, __KERNEL_PERCPU);
487 __loadsegment_simple(gs, 0);
488 wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
490 load_stack_canary_segment();
494 /* The 32-bit entry code needs to find cpu_entry_area. */
495 DEFINE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
500 * Special IST stacks which the CPU switches to when it calls
501 * an IST-marked descriptor entry. Up to 7 stacks (hardware
502 * limit), all of them are 4K, except the debug stack which
505 static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
506 [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ,
507 [DEBUG_STACK - 1] = DEBUG_STKSZ
511 /* Load the original GDT from the per-cpu structure */
512 void load_direct_gdt(int cpu)
514 struct desc_ptr gdt_descr;
516 gdt_descr.address = (long)get_cpu_gdt_rw(cpu);
517 gdt_descr.size = GDT_SIZE - 1;
518 load_gdt(&gdt_descr);
520 EXPORT_SYMBOL_GPL(load_direct_gdt);
522 /* Load a fixmap remapping of the per-cpu GDT */
523 void load_fixmap_gdt(int cpu)
525 struct desc_ptr gdt_descr;
527 gdt_descr.address = (long)get_cpu_gdt_ro(cpu);
528 gdt_descr.size = GDT_SIZE - 1;
529 load_gdt(&gdt_descr);
531 EXPORT_SYMBOL_GPL(load_fixmap_gdt);
534 * Current gdt points %fs at the "master" per-cpu area: after this,
535 * it's on the real one.
537 void switch_to_new_gdt(int cpu)
539 /* Load the original GDT */
540 load_direct_gdt(cpu);
541 /* Reload the per-cpu base */
542 load_percpu_segment(cpu);
545 static const struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
547 static void get_model_name(struct cpuinfo_x86 *c)
552 if (c->extended_cpuid_level < 0x80000004)
555 v = (unsigned int *)c->x86_model_id;
556 cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
557 cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
558 cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
559 c->x86_model_id[48] = 0;
561 /* Trim whitespace */
562 p = q = s = &c->x86_model_id[0];
568 /* Note the last non-whitespace index */
578 void cpu_detect_cache_sizes(struct cpuinfo_x86 *c)
580 unsigned int n, dummy, ebx, ecx, edx, l2size;
582 n = c->extended_cpuid_level;
584 if (n >= 0x80000005) {
585 cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
586 c->x86_cache_size = (ecx>>24) + (edx>>24);
588 /* On K8 L1 TLB is inclusive, so don't count it */
593 if (n < 0x80000006) /* Some chips just has a large L1. */
596 cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
600 c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
602 /* do processor-specific cache resizing */
603 if (this_cpu->legacy_cache_size)
604 l2size = this_cpu->legacy_cache_size(c, l2size);
606 /* Allow user to override all this if necessary. */
607 if (cachesize_override != -1)
608 l2size = cachesize_override;
611 return; /* Again, no L2 cache is possible */
614 c->x86_cache_size = l2size;
617 u16 __read_mostly tlb_lli_4k[NR_INFO];
618 u16 __read_mostly tlb_lli_2m[NR_INFO];
619 u16 __read_mostly tlb_lli_4m[NR_INFO];
620 u16 __read_mostly tlb_lld_4k[NR_INFO];
621 u16 __read_mostly tlb_lld_2m[NR_INFO];
622 u16 __read_mostly tlb_lld_4m[NR_INFO];
623 u16 __read_mostly tlb_lld_1g[NR_INFO];
625 static void cpu_detect_tlb(struct cpuinfo_x86 *c)
627 if (this_cpu->c_detect_tlb)
628 this_cpu->c_detect_tlb(c);
630 pr_info("Last level iTLB entries: 4KB %d, 2MB %d, 4MB %d\n",
631 tlb_lli_4k[ENTRIES], tlb_lli_2m[ENTRIES],
632 tlb_lli_4m[ENTRIES]);
634 pr_info("Last level dTLB entries: 4KB %d, 2MB %d, 4MB %d, 1GB %d\n",
635 tlb_lld_4k[ENTRIES], tlb_lld_2m[ENTRIES],
636 tlb_lld_4m[ENTRIES], tlb_lld_1g[ENTRIES]);
639 void detect_ht(struct cpuinfo_x86 *c)
642 u32 eax, ebx, ecx, edx;
643 int index_msb, core_bits;
646 if (!cpu_has(c, X86_FEATURE_HT))
649 if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
652 if (cpu_has(c, X86_FEATURE_XTOPOLOGY))
655 cpuid(1, &eax, &ebx, &ecx, &edx);
657 smp_num_siblings = (ebx & 0xff0000) >> 16;
659 if (smp_num_siblings == 1) {
660 pr_info_once("CPU0: Hyper-Threading is disabled\n");
664 if (smp_num_siblings <= 1)
667 index_msb = get_count_order(smp_num_siblings);
668 c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, index_msb);
670 smp_num_siblings = smp_num_siblings / c->x86_max_cores;
672 index_msb = get_count_order(smp_num_siblings);
674 core_bits = get_count_order(c->x86_max_cores);
676 c->cpu_core_id = apic->phys_pkg_id(c->initial_apicid, index_msb) &
677 ((1 << core_bits) - 1);
680 if (!printed && (c->x86_max_cores * smp_num_siblings) > 1) {
681 pr_info("CPU: Physical Processor ID: %d\n",
683 pr_info("CPU: Processor Core ID: %d\n",
690 static void get_cpu_vendor(struct cpuinfo_x86 *c)
692 char *v = c->x86_vendor_id;
695 for (i = 0; i < X86_VENDOR_NUM; i++) {
699 if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
700 (cpu_devs[i]->c_ident[1] &&
701 !strcmp(v, cpu_devs[i]->c_ident[1]))) {
703 this_cpu = cpu_devs[i];
704 c->x86_vendor = this_cpu->c_x86_vendor;
709 pr_err_once("CPU: vendor_id '%s' unknown, using generic init.\n" \
710 "CPU: Your system may be unstable.\n", v);
712 c->x86_vendor = X86_VENDOR_UNKNOWN;
713 this_cpu = &default_cpu;
716 void cpu_detect(struct cpuinfo_x86 *c)
718 /* Get vendor name */
719 cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
720 (unsigned int *)&c->x86_vendor_id[0],
721 (unsigned int *)&c->x86_vendor_id[8],
722 (unsigned int *)&c->x86_vendor_id[4]);
725 /* Intel-defined flags: level 0x00000001 */
726 if (c->cpuid_level >= 0x00000001) {
727 u32 junk, tfms, cap0, misc;
729 cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
730 c->x86 = x86_family(tfms);
731 c->x86_model = x86_model(tfms);
732 c->x86_mask = x86_stepping(tfms);
734 if (cap0 & (1<<19)) {
735 c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
736 c->x86_cache_alignment = c->x86_clflush_size;
741 static void apply_forced_caps(struct cpuinfo_x86 *c)
745 for (i = 0; i < NCAPINTS + NBUGINTS; i++) {
746 c->x86_capability[i] &= ~cpu_caps_cleared[i];
747 c->x86_capability[i] |= cpu_caps_set[i];
751 void get_cpu_cap(struct cpuinfo_x86 *c)
753 u32 eax, ebx, ecx, edx;
755 /* Intel-defined flags: level 0x00000001 */
756 if (c->cpuid_level >= 0x00000001) {
757 cpuid(0x00000001, &eax, &ebx, &ecx, &edx);
759 c->x86_capability[CPUID_1_ECX] = ecx;
760 c->x86_capability[CPUID_1_EDX] = edx;
763 /* Thermal and Power Management Leaf: level 0x00000006 (eax) */
764 if (c->cpuid_level >= 0x00000006)
765 c->x86_capability[CPUID_6_EAX] = cpuid_eax(0x00000006);
767 /* Additional Intel-defined flags: level 0x00000007 */
768 if (c->cpuid_level >= 0x00000007) {
769 cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx);
770 c->x86_capability[CPUID_7_0_EBX] = ebx;
771 c->x86_capability[CPUID_7_ECX] = ecx;
774 /* Extended state features: level 0x0000000d */
775 if (c->cpuid_level >= 0x0000000d) {
776 cpuid_count(0x0000000d, 1, &eax, &ebx, &ecx, &edx);
778 c->x86_capability[CPUID_D_1_EAX] = eax;
781 /* Additional Intel-defined flags: level 0x0000000F */
782 if (c->cpuid_level >= 0x0000000F) {
784 /* QoS sub-leaf, EAX=0Fh, ECX=0 */
785 cpuid_count(0x0000000F, 0, &eax, &ebx, &ecx, &edx);
786 c->x86_capability[CPUID_F_0_EDX] = edx;
788 if (cpu_has(c, X86_FEATURE_CQM_LLC)) {
789 /* will be overridden if occupancy monitoring exists */
790 c->x86_cache_max_rmid = ebx;
792 /* QoS sub-leaf, EAX=0Fh, ECX=1 */
793 cpuid_count(0x0000000F, 1, &eax, &ebx, &ecx, &edx);
794 c->x86_capability[CPUID_F_1_EDX] = edx;
796 if ((cpu_has(c, X86_FEATURE_CQM_OCCUP_LLC)) ||
797 ((cpu_has(c, X86_FEATURE_CQM_MBM_TOTAL)) ||
798 (cpu_has(c, X86_FEATURE_CQM_MBM_LOCAL)))) {
799 c->x86_cache_max_rmid = ecx;
800 c->x86_cache_occ_scale = ebx;
803 c->x86_cache_max_rmid = -1;
804 c->x86_cache_occ_scale = -1;
808 /* AMD-defined flags: level 0x80000001 */
809 eax = cpuid_eax(0x80000000);
810 c->extended_cpuid_level = eax;
812 if ((eax & 0xffff0000) == 0x80000000) {
813 if (eax >= 0x80000001) {
814 cpuid(0x80000001, &eax, &ebx, &ecx, &edx);
816 c->x86_capability[CPUID_8000_0001_ECX] = ecx;
817 c->x86_capability[CPUID_8000_0001_EDX] = edx;
821 if (c->extended_cpuid_level >= 0x80000007) {
822 cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
824 c->x86_capability[CPUID_8000_0007_EBX] = ebx;
828 if (c->extended_cpuid_level >= 0x80000008) {
829 cpuid(0x80000008, &eax, &ebx, &ecx, &edx);
831 c->x86_virt_bits = (eax >> 8) & 0xff;
832 c->x86_phys_bits = eax & 0xff;
833 c->x86_capability[CPUID_8000_0008_EBX] = ebx;
836 else if (cpu_has(c, X86_FEATURE_PAE) || cpu_has(c, X86_FEATURE_PSE36))
837 c->x86_phys_bits = 36;
840 if (c->extended_cpuid_level >= 0x8000000a)
841 c->x86_capability[CPUID_8000_000A_EDX] = cpuid_edx(0x8000000a);
843 init_scattered_cpuid_features(c);
846 * Clear/Set all flags overridden by options, after probe.
847 * This needs to happen each time we re-probe, which may happen
848 * several times during CPU initialization.
850 apply_forced_caps(c);
853 static void identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
859 * First of all, decide if this is a 486 or higher
860 * It's a 486 if we can modify the AC flag
862 if (flag_is_changeable_p(X86_EFLAGS_AC))
867 for (i = 0; i < X86_VENDOR_NUM; i++)
868 if (cpu_devs[i] && cpu_devs[i]->c_identify) {
869 c->x86_vendor_id[0] = 0;
870 cpu_devs[i]->c_identify(c);
871 if (c->x86_vendor_id[0]) {
880 * Do minimum CPU detection early.
881 * Fields really needed: vendor, cpuid_level, family, model, mask,
883 * The others are not touched to avoid unwanted side effects.
885 * WARNING: this function is only called on the boot CPU. Don't add code
886 * here that is supposed to run on all CPUs.
888 static void __init early_identify_cpu(struct cpuinfo_x86 *c)
891 c->x86_clflush_size = 64;
892 c->x86_phys_bits = 36;
893 c->x86_virt_bits = 48;
895 c->x86_clflush_size = 32;
896 c->x86_phys_bits = 32;
897 c->x86_virt_bits = 32;
899 c->x86_cache_alignment = c->x86_clflush_size;
901 memset(&c->x86_capability, 0, sizeof c->x86_capability);
902 c->extended_cpuid_level = 0;
904 /* cyrix could have cpuid enabled via c_identify()*/
905 if (have_cpuid_p()) {
909 setup_force_cpu_cap(X86_FEATURE_CPUID);
911 if (this_cpu->c_early_init)
912 this_cpu->c_early_init(c);
915 filter_cpuid_features(c, false);
917 if (this_cpu->c_bsp_init)
918 this_cpu->c_bsp_init(c);
920 identify_cpu_without_cpuid(c);
921 setup_clear_cpu_cap(X86_FEATURE_CPUID);
924 setup_force_cpu_cap(X86_FEATURE_ALWAYS);
926 if (c->x86_vendor != X86_VENDOR_AMD)
927 setup_force_cpu_bug(X86_BUG_CPU_MELTDOWN);
933 * Regardless of whether PCID is enumerated, the SDM says
934 * that it can't be enabled in 32-bit mode.
936 setup_clear_cpu_cap(X86_FEATURE_PCID);
940 void __init early_cpu_init(void)
942 const struct cpu_dev *const *cdev;
945 #ifdef CONFIG_PROCESSOR_SELECT
946 pr_info("KERNEL supported cpus:\n");
949 for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) {
950 const struct cpu_dev *cpudev = *cdev;
952 if (count >= X86_VENDOR_NUM)
954 cpu_devs[count] = cpudev;
957 #ifdef CONFIG_PROCESSOR_SELECT
961 for (j = 0; j < 2; j++) {
962 if (!cpudev->c_ident[j])
964 pr_info(" %s %s\n", cpudev->c_vendor,
970 early_identify_cpu(&boot_cpu_data);
974 * The NOPL instruction is supposed to exist on all CPUs of family >= 6;
975 * unfortunately, that's not true in practice because of early VIA
976 * chips and (more importantly) broken virtualizers that are not easy
977 * to detect. In the latter case it doesn't even *fail* reliably, so
978 * probing for it doesn't even work. Disable it completely on 32-bit
979 * unless we can find a reliable way to detect all the broken cases.
980 * Enable it explicitly on 64-bit for non-constant inputs of cpu_has().
982 static void detect_nopl(struct cpuinfo_x86 *c)
985 clear_cpu_cap(c, X86_FEATURE_NOPL);
987 set_cpu_cap(c, X86_FEATURE_NOPL);
991 static void detect_null_seg_behavior(struct cpuinfo_x86 *c)
995 * Empirically, writing zero to a segment selector on AMD does
996 * not clear the base, whereas writing zero to a segment
997 * selector on Intel does clear the base. Intel's behavior
998 * allows slightly faster context switches in the common case
999 * where GS is unused by the prev and next threads.
1001 * Since neither vendor documents this anywhere that I can see,
1002 * detect it directly instead of hardcoding the choice by
1005 * I've designated AMD's behavior as the "bug" because it's
1006 * counterintuitive and less friendly.
1009 unsigned long old_base, tmp;
1010 rdmsrl(MSR_FS_BASE, old_base);
1011 wrmsrl(MSR_FS_BASE, 1);
1013 rdmsrl(MSR_FS_BASE, tmp);
1015 set_cpu_bug(c, X86_BUG_NULL_SEG);
1016 wrmsrl(MSR_FS_BASE, old_base);
1020 static void generic_identify(struct cpuinfo_x86 *c)
1022 c->extended_cpuid_level = 0;
1024 if (!have_cpuid_p())
1025 identify_cpu_without_cpuid(c);
1027 /* cyrix could have cpuid enabled via c_identify()*/
1028 if (!have_cpuid_p())
1037 if (c->cpuid_level >= 0x00000001) {
1038 c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
1039 #ifdef CONFIG_X86_32
1041 c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
1043 c->apicid = c->initial_apicid;
1046 c->phys_proc_id = c->initial_apicid;
1049 get_model_name(c); /* Default name */
1053 detect_null_seg_behavior(c);
1056 * ESPFIX is a strange bug. All real CPUs have it. Paravirt
1057 * systems that run Linux at CPL > 0 may or may not have the
1058 * issue, but, even if they have the issue, there's absolutely
1059 * nothing we can do about it because we can't use the real IRET
1062 * NB: For the time being, only 32-bit kernels support
1063 * X86_BUG_ESPFIX as such. 64-bit kernels directly choose
1064 * whether to apply espfix using paravirt hooks. If any
1065 * non-paravirt system ever shows up that does *not* have the
1066 * ESPFIX issue, we can change this.
1068 #ifdef CONFIG_X86_32
1069 # ifdef CONFIG_PARAVIRT
1071 extern void native_iret(void);
1072 if (pv_cpu_ops.iret == native_iret)
1073 set_cpu_bug(c, X86_BUG_ESPFIX);
1076 set_cpu_bug(c, X86_BUG_ESPFIX);
1081 static void x86_init_cache_qos(struct cpuinfo_x86 *c)
1084 * The heavy lifting of max_rmid and cache_occ_scale are handled
1085 * in get_cpu_cap(). Here we just set the max_rmid for the boot_cpu
1086 * in case CQM bits really aren't there in this CPU.
1088 if (c != &boot_cpu_data) {
1089 boot_cpu_data.x86_cache_max_rmid =
1090 min(boot_cpu_data.x86_cache_max_rmid,
1091 c->x86_cache_max_rmid);
1096 * Validate that ACPI/mptables have the same information about the
1097 * effective APIC id and update the package map.
1099 static void validate_apic_and_package_id(struct cpuinfo_x86 *c)
1102 unsigned int apicid, cpu = smp_processor_id();
1104 apicid = apic->cpu_present_to_apicid(cpu);
1106 if (apicid != c->apicid) {
1107 pr_err(FW_BUG "CPU%u: APIC id mismatch. Firmware: %x APIC: %x\n",
1108 cpu, apicid, c->initial_apicid);
1110 BUG_ON(topology_update_package_map(c->phys_proc_id, cpu));
1112 c->logical_proc_id = 0;
1117 * This does the hard work of actually picking apart the CPU stuff...
1119 static void identify_cpu(struct cpuinfo_x86 *c)
1123 c->loops_per_jiffy = loops_per_jiffy;
1124 c->x86_cache_size = -1;
1125 c->x86_vendor = X86_VENDOR_UNKNOWN;
1126 c->x86_model = c->x86_mask = 0; /* So far unknown... */
1127 c->x86_vendor_id[0] = '\0'; /* Unset */
1128 c->x86_model_id[0] = '\0'; /* Unset */
1129 c->x86_max_cores = 1;
1130 c->x86_coreid_bits = 0;
1132 #ifdef CONFIG_X86_64
1133 c->x86_clflush_size = 64;
1134 c->x86_phys_bits = 36;
1135 c->x86_virt_bits = 48;
1137 c->cpuid_level = -1; /* CPUID not detected */
1138 c->x86_clflush_size = 32;
1139 c->x86_phys_bits = 32;
1140 c->x86_virt_bits = 32;
1142 c->x86_cache_alignment = c->x86_clflush_size;
1143 memset(&c->x86_capability, 0, sizeof c->x86_capability);
1145 generic_identify(c);
1147 if (this_cpu->c_identify)
1148 this_cpu->c_identify(c);
1150 /* Clear/Set all flags overridden by options, after probe */
1151 apply_forced_caps(c);
1153 #ifdef CONFIG_X86_64
1154 c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
1158 * Vendor-specific initialization. In this section we
1159 * canonicalize the feature flags, meaning if there are
1160 * features a certain CPU supports which CPUID doesn't
1161 * tell us, CPUID claiming incorrect flags, or other bugs,
1162 * we handle them here.
1164 * At the end of this section, c->x86_capability better
1165 * indicate the features this CPU genuinely supports!
1167 if (this_cpu->c_init)
1168 this_cpu->c_init(c);
1170 /* Disable the PN if appropriate */
1171 squash_the_stupid_serial_number(c);
1173 /* Set up SMEP/SMAP/UMIP */
1179 * The vendor-specific functions might have changed features.
1180 * Now we do "generic changes."
1183 /* Filter out anything that depends on CPUID levels we don't have */
1184 filter_cpuid_features(c, true);
1186 /* If the model name is still unset, do table lookup. */
1187 if (!c->x86_model_id[0]) {
1189 p = table_lookup_model(c);
1191 strcpy(c->x86_model_id, p);
1193 /* Last resort... */
1194 sprintf(c->x86_model_id, "%02x/%02x",
1195 c->x86, c->x86_model);
1198 #ifdef CONFIG_X86_64
1203 x86_init_cache_qos(c);
1207 * Clear/Set all flags overridden by options, need do it
1208 * before following smp all cpus cap AND.
1210 apply_forced_caps(c);
1213 * On SMP, boot_cpu_data holds the common feature set between
1214 * all CPUs; so make sure that we indicate which features are
1215 * common between the CPUs. The first time this routine gets
1216 * executed, c == &boot_cpu_data.
1218 if (c != &boot_cpu_data) {
1219 /* AND the already accumulated flags with these */
1220 for (i = 0; i < NCAPINTS; i++)
1221 boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
1223 /* OR, i.e. replicate the bug flags */
1224 for (i = NCAPINTS; i < NCAPINTS + NBUGINTS; i++)
1225 c->x86_capability[i] |= boot_cpu_data.x86_capability[i];
1228 /* Init Machine Check Exception if available. */
1231 select_idle_routine(c);
1234 numa_add_cpu(smp_processor_id());
1239 * Set up the CPU state needed to execute SYSENTER/SYSEXIT instructions
1240 * on 32-bit kernels:
1242 #ifdef CONFIG_X86_32
1243 void enable_sep_cpu(void)
1245 struct tss_struct *tss;
1248 if (!boot_cpu_has(X86_FEATURE_SEP))
1252 tss = &per_cpu(cpu_tss_rw, cpu);
1255 * We cache MSR_IA32_SYSENTER_CS's value in the TSS's ss1 field --
1256 * see the big comment in struct x86_hw_tss's definition.
1259 tss->x86_tss.ss1 = __KERNEL_CS;
1260 wrmsr(MSR_IA32_SYSENTER_CS, tss->x86_tss.ss1, 0);
1261 wrmsr(MSR_IA32_SYSENTER_ESP, (unsigned long)(cpu_entry_stack(cpu) + 1), 0);
1262 wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
1268 void __init identify_boot_cpu(void)
1270 identify_cpu(&boot_cpu_data);
1271 #ifdef CONFIG_X86_32
1275 cpu_detect_tlb(&boot_cpu_data);
1278 void identify_secondary_cpu(struct cpuinfo_x86 *c)
1280 BUG_ON(c == &boot_cpu_data);
1282 #ifdef CONFIG_X86_32
1286 validate_apic_and_package_id(c);
1289 static __init int setup_noclflush(char *arg)
1291 setup_clear_cpu_cap(X86_FEATURE_CLFLUSH);
1292 setup_clear_cpu_cap(X86_FEATURE_CLFLUSHOPT);
1295 __setup("noclflush", setup_noclflush);
1297 void print_cpu_info(struct cpuinfo_x86 *c)
1299 const char *vendor = NULL;
1301 if (c->x86_vendor < X86_VENDOR_NUM) {
1302 vendor = this_cpu->c_vendor;
1304 if (c->cpuid_level >= 0)
1305 vendor = c->x86_vendor_id;
1308 if (vendor && !strstr(c->x86_model_id, vendor))
1309 pr_cont("%s ", vendor);
1311 if (c->x86_model_id[0])
1312 pr_cont("%s", c->x86_model_id);
1314 pr_cont("%d86", c->x86);
1316 pr_cont(" (family: 0x%x, model: 0x%x", c->x86, c->x86_model);
1318 if (c->x86_mask || c->cpuid_level >= 0)
1319 pr_cont(", stepping: 0x%x)\n", c->x86_mask);
1325 * clearcpuid= was already parsed in fpu__init_parse_early_param.
1326 * But we need to keep a dummy __setup around otherwise it would
1327 * show up as an environment variable for init.
1329 static __init int setup_clearcpuid(char *arg)
1333 __setup("clearcpuid=", setup_clearcpuid);
1335 #ifdef CONFIG_X86_64
1336 DEFINE_PER_CPU_FIRST(union irq_stack_union,
1337 irq_stack_union) __aligned(PAGE_SIZE) __visible;
1340 * The following percpu variables are hot. Align current_task to
1341 * cacheline size such that they fall in the same cacheline.
1343 DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned =
1345 EXPORT_PER_CPU_SYMBOL(current_task);
1347 DEFINE_PER_CPU(char *, irq_stack_ptr) =
1348 init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE;
1350 DEFINE_PER_CPU(unsigned int, irq_count) __visible = -1;
1352 DEFINE_PER_CPU(int, __preempt_count) = INIT_PREEMPT_COUNT;
1353 EXPORT_PER_CPU_SYMBOL(__preempt_count);
1355 /* May not be marked __init: used by software suspend */
1356 void syscall_init(void)
1358 extern char _entry_trampoline[];
1359 extern char entry_SYSCALL_64_trampoline[];
1361 int cpu = smp_processor_id();
1362 unsigned long SYSCALL64_entry_trampoline =
1363 (unsigned long)get_cpu_entry_area(cpu)->entry_trampoline +
1364 (entry_SYSCALL_64_trampoline - _entry_trampoline);
1366 wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
1367 if (static_cpu_has(X86_FEATURE_PTI))
1368 wrmsrl(MSR_LSTAR, SYSCALL64_entry_trampoline);
1370 wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
1372 #ifdef CONFIG_IA32_EMULATION
1373 wrmsrl(MSR_CSTAR, (unsigned long)entry_SYSCALL_compat);
1375 * This only works on Intel CPUs.
1376 * On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP.
1377 * This does not cause SYSENTER to jump to the wrong location, because
1378 * AMD doesn't allow SYSENTER in long mode (either 32- or 64-bit).
1380 wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
1381 wrmsrl_safe(MSR_IA32_SYSENTER_ESP, (unsigned long)(cpu_entry_stack(cpu) + 1));
1382 wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
1384 wrmsrl(MSR_CSTAR, (unsigned long)ignore_sysret);
1385 wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
1386 wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
1387 wrmsrl_safe(MSR_IA32_SYSENTER_EIP, 0ULL);
1390 /* Flags to clear on syscall */
1391 wrmsrl(MSR_SYSCALL_MASK,
1392 X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|
1393 X86_EFLAGS_IOPL|X86_EFLAGS_AC|X86_EFLAGS_NT);
1397 * Copies of the original ist values from the tss are only accessed during
1398 * debugging, no special alignment required.
1400 DEFINE_PER_CPU(struct orig_ist, orig_ist);
1402 static DEFINE_PER_CPU(unsigned long, debug_stack_addr);
1403 DEFINE_PER_CPU(int, debug_stack_usage);
1405 int is_debug_stack(unsigned long addr)
1407 return __this_cpu_read(debug_stack_usage) ||
1408 (addr <= __this_cpu_read(debug_stack_addr) &&
1409 addr > (__this_cpu_read(debug_stack_addr) - DEBUG_STKSZ));
1411 NOKPROBE_SYMBOL(is_debug_stack);
1413 DEFINE_PER_CPU(u32, debug_idt_ctr);
1415 void debug_stack_set_zero(void)
1417 this_cpu_inc(debug_idt_ctr);
1420 NOKPROBE_SYMBOL(debug_stack_set_zero);
1422 void debug_stack_reset(void)
1424 if (WARN_ON(!this_cpu_read(debug_idt_ctr)))
1426 if (this_cpu_dec_return(debug_idt_ctr) == 0)
1429 NOKPROBE_SYMBOL(debug_stack_reset);
1431 #else /* CONFIG_X86_64 */
1433 DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
1434 EXPORT_PER_CPU_SYMBOL(current_task);
1435 DEFINE_PER_CPU(int, __preempt_count) = INIT_PREEMPT_COUNT;
1436 EXPORT_PER_CPU_SYMBOL(__preempt_count);
1439 * On x86_32, vm86 modifies tss.sp0, so sp0 isn't a reliable way to find
1440 * the top of the kernel stack. Use an extra percpu variable to track the
1441 * top of the kernel stack directly.
1443 DEFINE_PER_CPU(unsigned long, cpu_current_top_of_stack) =
1444 (unsigned long)&init_thread_union + THREAD_SIZE;
1445 EXPORT_PER_CPU_SYMBOL(cpu_current_top_of_stack);
1447 #ifdef CONFIG_CC_STACKPROTECTOR
1448 DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
1451 #endif /* CONFIG_X86_64 */
1454 * Clear all 6 debug registers:
1456 static void clear_all_debug_regs(void)
1460 for (i = 0; i < 8; i++) {
1461 /* Ignore db4, db5 */
1462 if ((i == 4) || (i == 5))
1471 * Restore debug regs if using kgdbwait and you have a kernel debugger
1472 * connection established.
1474 static void dbg_restore_debug_regs(void)
1476 if (unlikely(kgdb_connected && arch_kgdb_ops.correct_hw_break))
1477 arch_kgdb_ops.correct_hw_break();
1479 #else /* ! CONFIG_KGDB */
1480 #define dbg_restore_debug_regs()
1481 #endif /* ! CONFIG_KGDB */
1483 static void wait_for_master_cpu(int cpu)
1487 * wait for ACK from master CPU before continuing
1488 * with AP initialization
1490 WARN_ON(cpumask_test_and_set_cpu(cpu, cpu_initialized_mask));
1491 while (!cpumask_test_cpu(cpu, cpu_callout_mask))
1497 * cpu_init() initializes state that is per-CPU. Some data is already
1498 * initialized (naturally) in the bootstrap process, such as the GDT
1499 * and IDT. We reload them nevertheless, this function acts as a
1500 * 'CPU state barrier', nothing should get across.
1501 * A lot of state is already set up in PDA init for 64 bit
1503 #ifdef CONFIG_X86_64
1507 struct orig_ist *oist;
1508 struct task_struct *me;
1509 struct tss_struct *t;
1511 int cpu = raw_smp_processor_id();
1514 wait_for_master_cpu(cpu);
1517 * Initialize the CR4 shadow before doing anything that could
1525 t = &per_cpu(cpu_tss_rw, cpu);
1526 oist = &per_cpu(orig_ist, cpu);
1529 if (this_cpu_read(numa_node) == 0 &&
1530 early_cpu_to_node(cpu) != NUMA_NO_NODE)
1531 set_numa_node(early_cpu_to_node(cpu));
1536 pr_debug("Initializing CPU#%d\n", cpu);
1538 cr4_clear_bits(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
1541 * Initialize the per-CPU GDT with the boot GDT,
1542 * and set up the GDT descriptor:
1545 switch_to_new_gdt(cpu);
1550 memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
1553 wrmsrl(MSR_FS_BASE, 0);
1554 wrmsrl(MSR_KERNEL_GS_BASE, 0);
1561 * set up and load the per-CPU TSS
1563 if (!oist->ist[0]) {
1564 char *estacks = get_cpu_entry_area(cpu)->exception_stacks;
1566 for (v = 0; v < N_EXCEPTION_STACKS; v++) {
1567 estacks += exception_stack_sizes[v];
1568 oist->ist[v] = t->x86_tss.ist[v] =
1569 (unsigned long)estacks;
1570 if (v == DEBUG_STACK-1)
1571 per_cpu(debug_stack_addr, cpu) = (unsigned long)estacks;
1575 t->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
1578 * <= is required because the CPU will access up to
1579 * 8 bits beyond the end of the IO permission bitmap.
1581 for (i = 0; i <= IO_BITMAP_LONGS; i++)
1582 t->io_bitmap[i] = ~0UL;
1585 me->active_mm = &init_mm;
1587 initialize_tlbstate_and_flush();
1588 enter_lazy_tlb(&init_mm, me);
1591 * Initialize the TSS. sp0 points to the entry trampoline stack
1592 * regardless of what task is running.
1594 set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
1596 load_sp0((unsigned long)(cpu_entry_stack(cpu) + 1));
1598 load_mm_ldt(&init_mm);
1600 clear_all_debug_regs();
1601 dbg_restore_debug_regs();
1608 load_fixmap_gdt(cpu);
1615 int cpu = smp_processor_id();
1616 struct task_struct *curr = current;
1617 struct tss_struct *t = &per_cpu(cpu_tss_rw, cpu);
1619 wait_for_master_cpu(cpu);
1622 * Initialize the CR4 shadow before doing anything that could
1627 show_ucode_info_early();
1629 pr_info("Initializing CPU#%d\n", cpu);
1631 if (cpu_feature_enabled(X86_FEATURE_VME) ||
1632 boot_cpu_has(X86_FEATURE_TSC) ||
1633 boot_cpu_has(X86_FEATURE_DE))
1634 cr4_clear_bits(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
1637 switch_to_new_gdt(cpu);
1640 * Set up and load the per-CPU TSS and LDT
1643 curr->active_mm = &init_mm;
1645 initialize_tlbstate_and_flush();
1646 enter_lazy_tlb(&init_mm, curr);
1649 * Initialize the TSS. Don't bother initializing sp0, as the initial
1650 * task never enters user mode.
1652 set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
1655 load_mm_ldt(&init_mm);
1657 t->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
1659 #ifdef CONFIG_DOUBLEFAULT
1660 /* Set up doublefault TSS pointer in the GDT */
1661 __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
1664 clear_all_debug_regs();
1665 dbg_restore_debug_regs();
1669 load_fixmap_gdt(cpu);
1673 static void bsp_resume(void)
1675 if (this_cpu->c_bsp_resume)
1676 this_cpu->c_bsp_resume(&boot_cpu_data);
1679 static struct syscore_ops cpu_syscore_ops = {
1680 .resume = bsp_resume,
1683 static int __init init_cpu_syscore(void)
1685 register_syscore_ops(&cpu_syscore_ops);
1688 core_initcall(init_cpu_syscore);