1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _ASM_X86_TLBFLUSH_H
3 #define _ASM_X86_TLBFLUSH_H
6 #include <linux/sched.h>
8 #include <asm/processor.h>
9 #include <asm/cpufeature.h>
10 #include <asm/special_insns.h>
12 #include <asm/invpcid.h>
14 #include <asm/processor-flags.h>
17 * The x86 feature is called PCID (Process Context IDentifier). It is similar
18 * to what is traditionally called ASID on the RISC processors.
20 * We don't use the traditional ASID implementation, where each process/mm gets
21 * its own ASID and flush/restart when we run out of ASID space.
23 * Instead we have a small per-cpu array of ASIDs and cache the last few mm's
24 * that came by on this CPU, allowing cheaper switch_mm between processes on
27 * We end up with different spaces for different things. To avoid confusion we
28 * use different names for each of them:
30 * ASID - [0, TLB_NR_DYN_ASIDS-1]
31 * the canonical identifier for an mm
33 * kPCID - [1, TLB_NR_DYN_ASIDS]
34 * the value we write into the PCID part of CR3; corresponds to the
35 * ASID+1, because PCID 0 is special.
37 * uPCID - [2048 + 1, 2048 + TLB_NR_DYN_ASIDS]
38 * for KPTI each mm has two address spaces and thus needs two
39 * PCID values, but we can still do with a single ASID denomination
40 * for each mm. Corresponds to kPCID + 2048.
44 /* There are 12 bits of space for ASIDS in CR3 */
45 #define CR3_HW_ASID_BITS 12
48 * When enabled, PAGE_TABLE_ISOLATION consumes a single bit for
49 * user/kernel switches
51 #ifdef CONFIG_PAGE_TABLE_ISOLATION
52 # define PTI_CONSUMED_PCID_BITS 1
54 # define PTI_CONSUMED_PCID_BITS 0
57 #define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS)
60 * ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid. -1 below to account
61 * for them being zero-based. Another -1 is because PCID 0 is reserved for
62 * use by non-PCID-aware users.
64 #define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2)
67 * 6 because 6 should be plenty and struct tlb_state will fit in two cache
70 #define TLB_NR_DYN_ASIDS 6
73 * Given @asid, compute kPCID
75 static inline u16 kern_pcid(u16 asid)
77 VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
79 #ifdef CONFIG_PAGE_TABLE_ISOLATION
81 * Make sure that the dynamic ASID space does not confict with the
82 * bit we are using to switch between user and kernel ASIDs.
84 BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT));
87 * The ASID being passed in here should have respected the
88 * MAX_ASID_AVAILABLE and thus never have the switch bit set.
90 VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT));
93 * The dynamically-assigned ASIDs that get passed in are small
94 * (<TLB_NR_DYN_ASIDS). They never have the high switch bit set,
95 * so do not bother to clear it.
97 * If PCID is on, ASID-aware code paths put the ASID+1 into the
98 * PCID bits. This serves two purposes. It prevents a nasty
99 * situation in which PCID-unaware code saves CR3, loads some other
100 * value (with PCID == 0), and then restores CR3, thus corrupting
101 * the TLB for ASID 0 if the saved ASID was nonzero. It also means
102 * that any bugs involving loading a PCID-enabled CR3 with
103 * CR4.PCIDE off will trigger deterministically.
109 * Given @asid, compute uPCID
111 static inline u16 user_pcid(u16 asid)
113 u16 ret = kern_pcid(asid);
114 #ifdef CONFIG_PAGE_TABLE_ISOLATION
115 ret |= 1 << X86_CR3_PTI_PCID_USER_BIT;
121 static inline unsigned long build_cr3(pgd_t *pgd, u16 asid)
123 if (static_cpu_has(X86_FEATURE_PCID)) {
124 return __sme_pa(pgd) | kern_pcid(asid);
126 VM_WARN_ON_ONCE(asid != 0);
127 return __sme_pa(pgd);
131 static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid)
133 VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
135 * Use boot_cpu_has() instead of this_cpu_has() as this function
136 * might be called during early boot. This should work even after
137 * boot because all CPU's the have same capabilities:
139 VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID));
140 return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH;
143 #ifdef CONFIG_PARAVIRT
144 #include <asm/paravirt.h>
146 #define __flush_tlb() __native_flush_tlb()
147 #define __flush_tlb_global() __native_flush_tlb_global()
148 #define __flush_tlb_one_user(addr) __native_flush_tlb_one_user(addr)
158 * cpu_tlbstate.loaded_mm should match CR3 whenever interrupts
159 * are on. This means that it may not match current->active_mm,
160 * which will contain the previous user mm when we're in lazy TLB
161 * mode even if we've already switched back to swapper_pg_dir.
163 * During switch_mm_irqs_off(), loaded_mm will be set to
164 * LOADED_MM_SWITCHING during the brief interrupts-off window
165 * when CR3 and loaded_mm would otherwise be inconsistent. This
166 * is for nmi_uaccess_okay()'s benefit.
168 struct mm_struct *loaded_mm;
170 #define LOADED_MM_SWITCHING ((struct mm_struct *)1UL)
172 /* Last user mm for optimizing IBPB */
174 struct mm_struct *last_user_mm;
175 unsigned long last_user_mm_ibpb;
182 * We can be in one of several states:
184 * - Actively using an mm. Our CPU's bit will be set in
185 * mm_cpumask(loaded_mm) and is_lazy == false;
187 * - Not using a real mm. loaded_mm == &init_mm. Our CPU's bit
188 * will not be set in mm_cpumask(&init_mm) and is_lazy == false.
190 * - Lazily using a real mm. loaded_mm != &init_mm, our bit
191 * is set in mm_cpumask(loaded_mm), but is_lazy == true.
192 * We're heuristically guessing that the CR3 load we
193 * skipped more than makes up for the overhead added by
199 * If set we changed the page tables in such a way that we
200 * needed an invalidation of all contexts (aka. PCIDs / ASIDs).
201 * This tells us to go invalidate all the non-loaded ctxs[]
202 * on the next context switch.
204 * The current ctx was kept up-to-date as it ran and does not
205 * need to be invalidated.
207 bool invalidate_other;
210 * Mask that contains TLB_NR_DYN_ASIDS+1 bits to indicate
211 * the corresponding user PCID needs a flush next time we
212 * switch to it; see SWITCH_TO_USER_CR3.
214 unsigned short user_pcid_flush_mask;
217 * Access to this CR4 shadow and to H/W CR4 is protected by
218 * disabling interrupts when modifying either one.
223 * This is a list of all contexts that might exist in the TLB.
224 * There is one per ASID that we use, and the ASID (what the
225 * CPU calls PCID) is the index into ctxts.
227 * For each context, ctx_id indicates which mm the TLB's user
228 * entries came from. As an invariant, the TLB will never
229 * contain entries that are out-of-date as when that mm reached
230 * the tlb_gen in the list.
232 * To be clear, this means that it's legal for the TLB code to
233 * flush the TLB without updating tlb_gen. This can happen
234 * (for now, at least) due to paravirt remote flushes.
236 * NB: context 0 is a bit special, since it's also used by
237 * various bits of init code. This is fine -- code that
238 * isn't aware of PCID will end up harmlessly flushing
241 struct tlb_context ctxs[TLB_NR_DYN_ASIDS];
243 DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
246 * Blindly accessing user memory from NMI context can be dangerous
247 * if we're in the middle of switching the current user task or
248 * switching the loaded mm. It can also be dangerous if we
249 * interrupted some kernel code that was temporarily using a
252 static inline bool nmi_uaccess_okay(void)
254 struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
255 struct mm_struct *current_mm = current->mm;
257 VM_WARN_ON_ONCE(!loaded_mm);
260 * The condition we want to check is
261 * current_mm->pgd == __va(read_cr3_pa()). This may be slow, though,
262 * if we're running in a VM with shadow paging, and nmi_uaccess_okay()
263 * is supposed to be reasonably fast.
265 * Instead, we check the almost equivalent but somewhat conservative
266 * condition below, and we rely on the fact that switch_mm_irqs_off()
267 * sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3.
269 if (loaded_mm != current_mm)
272 VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa()));
277 #define nmi_uaccess_okay nmi_uaccess_okay
279 /* Initialize cr4 shadow for this CPU. */
280 static inline void cr4_init_shadow(void)
282 this_cpu_write(cpu_tlbstate.cr4, __read_cr4());
285 static inline void __cr4_set(unsigned long cr4)
287 lockdep_assert_irqs_disabled();
288 this_cpu_write(cpu_tlbstate.cr4, cr4);
292 /* Set in this cpu's CR4. */
293 static inline void cr4_set_bits(unsigned long mask)
295 unsigned long cr4, flags;
297 local_irq_save(flags);
298 cr4 = this_cpu_read(cpu_tlbstate.cr4);
299 if ((cr4 | mask) != cr4)
300 __cr4_set(cr4 | mask);
301 local_irq_restore(flags);
304 /* Clear in this cpu's CR4. */
305 static inline void cr4_clear_bits(unsigned long mask)
307 unsigned long cr4, flags;
309 local_irq_save(flags);
310 cr4 = this_cpu_read(cpu_tlbstate.cr4);
311 if ((cr4 & ~mask) != cr4)
312 __cr4_set(cr4 & ~mask);
313 local_irq_restore(flags);
316 static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
320 cr4 = this_cpu_read(cpu_tlbstate.cr4);
321 __cr4_set(cr4 ^ mask);
324 /* Read the CR4 shadow. */
325 static inline unsigned long cr4_read_shadow(void)
327 return this_cpu_read(cpu_tlbstate.cr4);
331 * Mark all other ASIDs as invalid, preserves the current.
333 static inline void invalidate_other_asid(void)
335 this_cpu_write(cpu_tlbstate.invalidate_other, true);
339 * Save some of cr4 feature set we're using (e.g. Pentium 4MB
340 * enable and PPro Global page enable), so that any CPU's that boot
341 * up after us can get the correct flags. This should only be used
342 * during boot on the boot cpu.
344 extern unsigned long mmu_cr4_features;
345 extern u32 *trampoline_cr4_features;
347 static inline void cr4_set_bits_and_update_boot(unsigned long mask)
349 mmu_cr4_features |= mask;
350 if (trampoline_cr4_features)
351 *trampoline_cr4_features = mmu_cr4_features;
355 extern void initialize_tlbstate_and_flush(void);
358 * Given an ASID, flush the corresponding user ASID. We can delay this
359 * until the next time we switch to it.
361 * See SWITCH_TO_USER_CR3.
363 static inline void invalidate_user_asid(u16 asid)
365 /* There is no user ASID if address space separation is off */
366 if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION))
370 * We only have a single ASID if PCID is off and the CR3
371 * write will have flushed it.
373 if (!cpu_feature_enabled(X86_FEATURE_PCID))
376 if (!static_cpu_has(X86_FEATURE_PTI))
379 __set_bit(kern_pcid(asid),
380 (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask));
384 * flush the entire current user mapping
386 static inline void __native_flush_tlb(void)
389 * Preemption or interrupts must be disabled to protect the access
390 * to the per CPU variable and to prevent being preempted between
391 * read_cr3() and write_cr3().
393 WARN_ON_ONCE(preemptible());
395 invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid));
397 /* If current->mm == NULL then the read_cr3() "borrows" an mm */
398 native_write_cr3(__native_read_cr3());
404 static inline void __native_flush_tlb_global(void)
406 unsigned long cr4, flags;
408 if (static_cpu_has(X86_FEATURE_INVPCID)) {
410 * Using INVPCID is considerably faster than a pair of writes
411 * to CR4 sandwiched inside an IRQ flag save/restore.
413 * Note, this works with CR4.PCIDE=0 or 1.
420 * Read-modify-write to CR4 - protect it from preemption and
421 * from interrupts. (Use the raw variant because this code can
422 * be called from deep inside debugging code.)
424 raw_local_irq_save(flags);
426 cr4 = this_cpu_read(cpu_tlbstate.cr4);
428 native_write_cr4(cr4 ^ X86_CR4_PGE);
429 /* write old PGE again and flush TLBs */
430 native_write_cr4(cr4);
432 raw_local_irq_restore(flags);
436 * flush one page in the user mapping
438 static inline void __native_flush_tlb_one_user(unsigned long addr)
440 u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
442 asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
444 if (!static_cpu_has(X86_FEATURE_PTI))
448 * Some platforms #GP if we call invpcid(type=1/2) before CR4.PCIDE=1.
449 * Just use invalidate_user_asid() in case we are called early.
451 if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE))
452 invalidate_user_asid(loaded_mm_asid);
454 invpcid_flush_one(user_pcid(loaded_mm_asid), addr);
460 static inline void __flush_tlb_all(void)
463 * This is to catch users with enabled preemption and the PGE feature
464 * and don't trigger the warning in __native_flush_tlb().
466 VM_WARN_ON_ONCE(preemptible());
468 if (boot_cpu_has(X86_FEATURE_PGE)) {
469 __flush_tlb_global();
472 * !PGE -> !PCID (setup_pcid()), thus every flush is total.
479 * flush one page in the kernel mapping
481 static inline void __flush_tlb_one_kernel(unsigned long addr)
483 count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
486 * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its
487 * paravirt equivalent. Even with PCID, this is sufficient: we only
488 * use PCID if we also use global PTEs for the kernel mapping, and
489 * INVLPG flushes global translations across all address spaces.
491 * If PTI is on, then the kernel is mapped with non-global PTEs, and
492 * __flush_tlb_one_user() will flush the given address for the current
493 * kernel address space and for its usermode counterpart, but it does
494 * not flush it for other address spaces.
496 __flush_tlb_one_user(addr);
498 if (!static_cpu_has(X86_FEATURE_PTI))
502 * See above. We need to propagate the flush to all other address
503 * spaces. In principle, we only need to propagate it to kernelmode
504 * address spaces, but the extra bookkeeping we would need is not
507 invalidate_other_asid();
510 #define TLB_FLUSH_ALL -1UL
515 * - flush_tlb_all() flushes all processes TLBs
516 * - flush_tlb_mm(mm) flushes the specified mm context TLB's
517 * - flush_tlb_page(vma, vmaddr) flushes one page
518 * - flush_tlb_range(vma, start, end) flushes a range of pages
519 * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
520 * - flush_tlb_others(cpumask, info) flushes TLBs on other cpus
522 * ..but the i386 has somewhat limited tlb flushing capabilities,
523 * and page-granular flushes are available only on i486 and up.
525 struct flush_tlb_info {
527 * We support several kinds of flushes.
529 * - Fully flush a single mm. .mm will be set, .end will be
530 * TLB_FLUSH_ALL, and .new_tlb_gen will be the tlb_gen to
531 * which the IPI sender is trying to catch us up.
533 * - Partially flush a single mm. .mm will be set, .start and
534 * .end will indicate the range, and .new_tlb_gen will be set
535 * such that the changes between generation .new_tlb_gen-1 and
536 * .new_tlb_gen are entirely contained in the indicated range.
538 * - Fully flush all mms whose tlb_gens have been updated. .mm
539 * will be NULL, .end will be TLB_FLUSH_ALL, and .new_tlb_gen
542 struct mm_struct *mm;
546 unsigned int stride_shift;
550 #define local_flush_tlb() __flush_tlb()
552 #define flush_tlb_mm(mm) \
553 flush_tlb_mm_range(mm, 0UL, TLB_FLUSH_ALL, 0UL, true)
555 #define flush_tlb_range(vma, start, end) \
556 flush_tlb_mm_range((vma)->vm_mm, start, end, \
557 ((vma)->vm_flags & VM_HUGETLB) \
558 ? huge_page_shift(hstate_vma(vma)) \
561 extern void flush_tlb_all(void);
562 extern void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
563 unsigned long end, unsigned int stride_shift,
565 extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
567 static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long a)
569 flush_tlb_mm_range(vma->vm_mm, a, a + PAGE_SIZE, PAGE_SHIFT, false);
572 void native_flush_tlb_others(const struct cpumask *cpumask,
573 const struct flush_tlb_info *info);
575 static inline u64 inc_mm_tlb_gen(struct mm_struct *mm)
578 * Bump the generation count. This also serves as a full barrier
579 * that synchronizes with switch_mm(): callers are required to order
580 * their read of mm_cpumask after their writes to the paging
583 return atomic64_inc_return(&mm->context.tlb_gen);
586 static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch,
587 struct mm_struct *mm)
590 cpumask_or(&batch->cpumask, &batch->cpumask, mm_cpumask(mm));
593 extern void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch);
595 #ifndef CONFIG_PARAVIRT
596 #define flush_tlb_others(mask, info) \
597 native_flush_tlb_others(mask, info)
599 #define paravirt_tlb_remove_table(tlb, page) \
600 tlb_remove_page(tlb, (void *)(page))
603 #endif /* _ASM_X86_TLBFLUSH_H */