1 /* SPDX-License-Identifier: GPL-2.0 */
3 * Intel OnChip System Fabric MailBox access support
6 #ifndef IOSF_MBI_SYMS_H
7 #define IOSF_MBI_SYMS_H
9 #include <linux/notifier.h>
11 #define MBI_MCR_OFFSET 0xD0
12 #define MBI_MDR_OFFSET 0xD4
13 #define MBI_MCRX_OFFSET 0xD8
15 #define MBI_RD_MASK 0xFEFFFFFF
16 #define MBI_WR_MASK 0X01000000
18 #define MBI_MASK_HI 0xFFFFFF00
19 #define MBI_MASK_LO 0x000000FF
20 #define MBI_ENABLE 0xF0
22 /* IOSF SB read/write opcodes */
23 #define MBI_MMIO_READ 0x00
24 #define MBI_MMIO_WRITE 0x01
25 #define MBI_CFG_READ 0x04
26 #define MBI_CFG_WRITE 0x05
27 #define MBI_CR_READ 0x06
28 #define MBI_CR_WRITE 0x07
29 #define MBI_REG_READ 0x10
30 #define MBI_REG_WRITE 0x11
31 #define MBI_ESRAM_READ 0x12
32 #define MBI_ESRAM_WRITE 0x13
34 /* Baytrail available units */
35 #define BT_MBI_UNIT_AUNIT 0x00
36 #define BT_MBI_UNIT_SMC 0x01
37 #define BT_MBI_UNIT_CPU 0x02
38 #define BT_MBI_UNIT_BUNIT 0x03
39 #define BT_MBI_UNIT_PMC 0x04
40 #define BT_MBI_UNIT_GFX 0x06
41 #define BT_MBI_UNIT_SMI 0x0C
42 #define BT_MBI_UNIT_CCK 0x14
43 #define BT_MBI_UNIT_USB 0x43
44 #define BT_MBI_UNIT_SATA 0xA3
45 #define BT_MBI_UNIT_PCIE 0xA6
47 /* Quark available units */
48 #define QRK_MBI_UNIT_HBA 0x00
49 #define QRK_MBI_UNIT_HB 0x03
50 #define QRK_MBI_UNIT_RMU 0x04
51 #define QRK_MBI_UNIT_MM 0x05
52 #define QRK_MBI_UNIT_SOC 0x31
54 /* Action values for the pmic_bus_access_notifier functions */
55 #define MBI_PMIC_BUS_ACCESS_BEGIN 1
56 #define MBI_PMIC_BUS_ACCESS_END 2
58 #if IS_ENABLED(CONFIG_IOSF_MBI)
60 bool iosf_mbi_available(void);
63 * iosf_mbi_read() - MailBox Interface read command
64 * @port: port indicating subunit being accessed
65 * @opcode: port specific read or write opcode
66 * @offset: register address offset
67 * @mdr: register data to be read
69 * Locking is handled by spinlock - cannot sleep.
70 * Return: Nonzero on error
72 int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr);
75 * iosf_mbi_write() - MailBox unmasked write command
76 * @port: port indicating subunit being accessed
77 * @opcode: port specific read or write opcode
78 * @offset: register address offset
79 * @mdr: register data to be written
81 * Locking is handled by spinlock - cannot sleep.
82 * Return: Nonzero on error
84 int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr);
87 * iosf_mbi_modify() - MailBox masked write command
88 * @port: port indicating subunit being accessed
89 * @opcode: port specific read or write opcode
90 * @offset: register address offset
91 * @mdr: register data being modified
92 * @mask: mask indicating bits in mdr to be modified
94 * Locking is handled by spinlock - cannot sleep.
95 * Return: Nonzero on error
97 int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask);
100 * iosf_mbi_punit_acquire() - Acquire access to the P-Unit
102 * One some systems the P-Unit accesses the PMIC to change various voltages
103 * through the same bus as other kernel drivers use for e.g. battery monitoring.
105 * If a driver sends requests to the P-Unit which require the P-Unit to access
106 * the PMIC bus while another driver is also accessing the PMIC bus various bad
109 * Call this function before sending requests to the P-Unit which may make it
110 * access the PMIC, be it through iosf_mbi* functions or through other means.
111 * This function will block all kernel access to the PMIC I2C bus, so that the
112 * P-Unit can safely access the PMIC over the shared I2C bus.
114 * Note on these systems the i2c-bus driver will request a semaphore from the
115 * P-Unit for exclusive access to the PMIC bus when i2c drivers are accessing
116 * it, but this does not appear to be sufficient, we still need to avoid making
117 * certain P-Unit requests during the access window to avoid problems.
119 * This function locks a mutex, as such it may sleep.
121 void iosf_mbi_punit_acquire(void);
124 * iosf_mbi_punit_release() - Release access to the P-Unit
126 void iosf_mbi_punit_release(void);
129 * iosf_mbi_block_punit_i2c_access() - Block P-Unit accesses to the PMIC bus
131 * Call this function to block P-Unit access to the PMIC I2C bus, so that the
132 * kernel can safely access the PMIC over the shared I2C bus.
134 * This function acquires the P-Unit bus semaphore and notifies
135 * pmic_bus_access_notifier listeners that they may no longer access the
136 * P-Unit in a way which may cause it to access the shared I2C bus.
138 * Note this function may be called multiple times and the bus will not
139 * be released until iosf_mbi_unblock_punit_i2c_access() has been called the
140 * same amount of times.
142 * Return: Nonzero on error
144 int iosf_mbi_block_punit_i2c_access(void);
147 * iosf_mbi_unblock_punit_i2c_access() - Release PMIC I2C bus block
149 * Release i2c access block gotten through iosf_mbi_block_punit_i2c_access().
151 void iosf_mbi_unblock_punit_i2c_access(void);
154 * iosf_mbi_register_pmic_bus_access_notifier - Register PMIC bus notifier
156 * This function can be used by drivers which may need to acquire P-Unit
157 * managed resources from interrupt context, where iosf_mbi_punit_acquire()
160 * This function allows a driver to register a notifier to get notified (in a
161 * process context) before other drivers start accessing the PMIC bus.
163 * This allows the driver to acquire any resources, which it may need during
164 * the window the other driver is accessing the PMIC, before hand.
166 * @nb: notifier_block to register
168 int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb);
171 * iosf_mbi_register_pmic_bus_access_notifier - Unregister PMIC bus notifier
173 * @nb: notifier_block to unregister
175 int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb);
178 * iosf_mbi_unregister_pmic_bus_access_notifier_unlocked - Unregister PMIC bus
181 * Like iosf_mbi_unregister_pmic_bus_access_notifier(), but for use when the
182 * caller has already called iosf_mbi_punit_acquire() itself.
184 * @nb: notifier_block to unregister
186 int iosf_mbi_unregister_pmic_bus_access_notifier_unlocked(
187 struct notifier_block *nb);
190 * iosf_mbi_assert_punit_acquired - Assert that the P-Unit has been acquired.
192 void iosf_mbi_assert_punit_acquired(void);
194 #else /* CONFIG_IOSF_MBI is not enabled */
196 bool iosf_mbi_available(void)
202 int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
204 WARN(1, "IOSF_MBI driver not available");
209 int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
211 WARN(1, "IOSF_MBI driver not available");
216 int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
218 WARN(1, "IOSF_MBI driver not available");
222 static inline void iosf_mbi_punit_acquire(void) {}
223 static inline void iosf_mbi_punit_release(void) {}
226 int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb)
232 int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb)
238 iosf_mbi_unregister_pmic_bus_access_notifier_unlocked(struct notifier_block *nb)
244 int iosf_mbi_call_pmic_bus_access_notifier_chain(unsigned long val, void *v)
249 static inline void iosf_mbi_assert_punit_acquired(void) {}
251 #endif /* CONFIG_IOSF_MBI */
253 #endif /* IOSF_MBI_SYMS_H */