Merge tag 'acpi-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...

[linux-2.6-microblaze.git] / arch / x86 / entry / entry_32.S

/* SPDX-License-Identifier: GPL-2.0 */
/*
 *  Copyright (C) 1991,1992  Linus Torvalds
 *
 * entry_32.S contains the system-call and low-level fault and trap handling routines.
 *
 * Stack layout while running C code:
 *      ptrace needs to have all registers on the stack.
 *      If the order here is changed, it needs to be
 *      updated in fork.c:copy_process(), signal.c:do_signal(),
 *      ptrace.c and ptrace.h
 *
 *       0(%esp) - %ebx
 *       4(%esp) - %ecx
 *       8(%esp) - %edx
 *       C(%esp) - %esi
 *      10(%esp) - %edi
 *      14(%esp) - %ebp
 *      18(%esp) - %eax
 *      1C(%esp) - %ds
 *      20(%esp) - %es
 *      24(%esp) - %fs
 *      28(%esp) - unused -- was %gs on old stackprotector kernels
 *      2C(%esp) - orig_eax
 *      30(%esp) - %eip
 *      34(%esp) - %cs
 *      38(%esp) - %eflags
 *      3C(%esp) - %oldesp
 *      40(%esp) - %oldss
 */

#include <linux/linkage.h>
#include <linux/err.h>
#include <asm/thread_info.h>
#include <asm/irqflags.h>
#include <asm/errno.h>
#include <asm/segment.h>
#include <asm/smp.h>
#include <asm/percpu.h>
#include <asm/processor-flags.h>
#include <asm/irq_vectors.h>
#include <asm/cpufeatures.h>
#include <asm/alternative.h>
#include <asm/asm.h>
#include <asm/smap.h>
#include <asm/frame.h>
#include <asm/trapnr.h>
#include <asm/nospec-branch.h>

#include "calling.h"

        .section .entry.text, "ax"

#define PTI_SWITCH_MASK         (1 << PAGE_SHIFT)

/* Unconditionally switch to user cr3 */
.macro SWITCH_TO_USER_CR3 scratch_reg:req
        ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI

        movl    %cr3, \scratch_reg
        orl     $PTI_SWITCH_MASK, \scratch_reg
        movl    \scratch_reg, %cr3
.Lend_\@:
.endm

.macro BUG_IF_WRONG_CR3 no_user_check=0
#ifdef CONFIG_DEBUG_ENTRY
        ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
        .if \no_user_check == 0
        /* coming from usermode? */
        testl   $USER_SEGMENT_RPL_MASK, PT_CS(%esp)
        jz      .Lend_\@
        .endif
        /* On user-cr3? */
        movl    %cr3, %eax
        testl   $PTI_SWITCH_MASK, %eax
        jnz     .Lend_\@
        /* From userspace with kernel cr3 - BUG */
        ud2
.Lend_\@:
#endif
.endm

/*
 * Switch to kernel cr3 if not already loaded and return current cr3 in
 * \scratch_reg
 */
.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
        ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
        movl    %cr3, \scratch_reg
        /* Test if we are already on kernel CR3 */
        testl   $PTI_SWITCH_MASK, \scratch_reg
        jz      .Lend_\@
        andl    $(~PTI_SWITCH_MASK), \scratch_reg
        movl    \scratch_reg, %cr3
        /* Return original CR3 in \scratch_reg */
        orl     $PTI_SWITCH_MASK, \scratch_reg
.Lend_\@:
.endm

#define CS_FROM_ENTRY_STACK     (1 << 31)
#define CS_FROM_USER_CR3        (1 << 30)
#define CS_FROM_KERNEL          (1 << 29)
#define CS_FROM_ESPFIX          (1 << 28)

.macro FIXUP_FRAME
        /*
         * The high bits of the CS dword (__csh) are used for CS_FROM_*.
         * Clear them in case hardware didn't do this for us.
         */
        andl    $0x0000ffff, 4*4(%esp)

#ifdef CONFIG_VM86
        testl   $X86_EFLAGS_VM, 5*4(%esp)
        jnz     .Lfrom_usermode_no_fixup_\@
#endif
        testl   $USER_SEGMENT_RPL_MASK, 4*4(%esp)
        jnz     .Lfrom_usermode_no_fixup_\@

        orl     $CS_FROM_KERNEL, 4*4(%esp)

        /*
         * When we're here from kernel mode; the (exception) stack looks like:
         *
         *  6*4(%esp) - <previous context>
         *  5*4(%esp) - flags
         *  4*4(%esp) - cs
         *  3*4(%esp) - ip
         *  2*4(%esp) - orig_eax
         *  1*4(%esp) - gs / function
         *  0*4(%esp) - fs
         *
         * Lets build a 5 entry IRET frame after that, such that struct pt_regs
         * is complete and in particular regs->sp is correct. This gives us
         * the original 6 entries as gap:
         *
         * 14*4(%esp) - <previous context>
         * 13*4(%esp) - gap / flags
         * 12*4(%esp) - gap / cs
         * 11*4(%esp) - gap / ip
         * 10*4(%esp) - gap / orig_eax
         *  9*4(%esp) - gap / gs / function
         *  8*4(%esp) - gap / fs
         *  7*4(%esp) - ss
         *  6*4(%esp) - sp
         *  5*4(%esp) - flags
         *  4*4(%esp) - cs
         *  3*4(%esp) - ip
         *  2*4(%esp) - orig_eax
         *  1*4(%esp) - gs / function
         *  0*4(%esp) - fs
         */

        pushl   %ss             # ss
        pushl   %esp            # sp (points at ss)
        addl    $7*4, (%esp)    # point sp back at the previous context
        pushl   7*4(%esp)       # flags
        pushl   7*4(%esp)       # cs
        pushl   7*4(%esp)       # ip
        pushl   7*4(%esp)       # orig_eax
        pushl   7*4(%esp)       # gs / function
        pushl   7*4(%esp)       # fs
.Lfrom_usermode_no_fixup_\@:
.endm

.macro IRET_FRAME
        /*
         * We're called with %ds, %es, %fs, and %gs from the interrupted
         * frame, so we shouldn't use them.  Also, we may be in ESPFIX
         * mode and therefore have a nonzero SS base and an offset ESP,
         * so any attempt to access the stack needs to use SS.  (except for
         * accesses through %esp, which automatically use SS.)
         */
        testl $CS_FROM_KERNEL, 1*4(%esp)
        jz .Lfinished_frame_\@

        /*
         * Reconstruct the 3 entry IRET frame right after the (modified)
         * regs->sp without lowering %esp in between, such that an NMI in the
         * middle doesn't scribble our stack.
         */
        pushl   %eax
        pushl   %ecx
        movl    5*4(%esp), %eax         # (modified) regs->sp

        movl    4*4(%esp), %ecx         # flags
        movl    %ecx, %ss:-1*4(%eax)

        movl    3*4(%esp), %ecx         # cs
        andl    $0x0000ffff, %ecx
        movl    %ecx, %ss:-2*4(%eax)

        movl    2*4(%esp), %ecx         # ip
        movl    %ecx, %ss:-3*4(%eax)

        movl    1*4(%esp), %ecx         # eax
        movl    %ecx, %ss:-4*4(%eax)

        popl    %ecx
        lea     -4*4(%eax), %esp
        popl    %eax
.Lfinished_frame_\@:
.endm

.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 skip_gs=0 unwind_espfix=0
        cld
.if \skip_gs == 0
        pushl   $0
.endif
        pushl   %fs

        pushl   %eax
        movl    $(__KERNEL_PERCPU), %eax
        movl    %eax, %fs
.if \unwind_espfix > 0
        UNWIND_ESPFIX_STACK
.endif
        popl    %eax

        FIXUP_FRAME
        pushl   %es
        pushl   %ds
        pushl   \pt_regs_ax
        pushl   %ebp
        pushl   %edi
        pushl   %esi
        pushl   %edx
        pushl   %ecx
        pushl   %ebx
        movl    $(__USER_DS), %edx
        movl    %edx, %ds
        movl    %edx, %es
        /* Switch to kernel stack if necessary */
.if \switch_stacks > 0
        SWITCH_TO_KERNEL_STACK
.endif
.endm

.macro SAVE_ALL_NMI cr3_reg:req unwind_espfix=0
        SAVE_ALL unwind_espfix=\unwind_espfix

        BUG_IF_WRONG_CR3

        /*
         * Now switch the CR3 when PTI is enabled.
         *
         * We can enter with either user or kernel cr3, the code will
         * store the old cr3 in \cr3_reg and switches to the kernel cr3
         * if necessary.
         */
        SWITCH_TO_KERNEL_CR3 scratch_reg=\cr3_reg

.Lend_\@:
.endm

.macro RESTORE_INT_REGS
        popl    %ebx
        popl    %ecx
        popl    %edx
        popl    %esi
        popl    %edi
        popl    %ebp
        popl    %eax
.endm

.macro RESTORE_REGS pop=0
        RESTORE_INT_REGS
1:      popl    %ds
2:      popl    %es
3:      popl    %fs
4:      addl    $(4 + \pop), %esp       /* pop the unused "gs" slot */
        IRET_FRAME

        /*
         * There is no _ASM_EXTABLE_TYPE_REG() for ASM, however since this is
         * ASM the registers are known and we can trivially hard-code them.
         */
        _ASM_EXTABLE_TYPE(1b, 2b, EX_TYPE_POP_ZERO|EX_REG_DS)
        _ASM_EXTABLE_TYPE(2b, 3b, EX_TYPE_POP_ZERO|EX_REG_ES)
        _ASM_EXTABLE_TYPE(3b, 4b, EX_TYPE_POP_ZERO|EX_REG_FS)
.endm

.macro RESTORE_ALL_NMI cr3_reg:req pop=0
        /*
         * Now switch the CR3 when PTI is enabled.
         *
         * We enter with kernel cr3 and switch the cr3 to the value
         * stored on \cr3_reg, which is either a user or a kernel cr3.
         */
        ALTERNATIVE "jmp .Lswitched_\@", "", X86_FEATURE_PTI

        testl   $PTI_SWITCH_MASK, \cr3_reg
        jz      .Lswitched_\@

        /* User cr3 in \cr3_reg - write it to hardware cr3 */
        movl    \cr3_reg, %cr3

.Lswitched_\@:

        BUG_IF_WRONG_CR3

        RESTORE_REGS pop=\pop
.endm

.macro CHECK_AND_APPLY_ESPFIX
#ifdef CONFIG_X86_ESPFIX32
#define GDT_ESPFIX_OFFSET (GDT_ENTRY_ESPFIX_SS * 8)
#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + GDT_ESPFIX_OFFSET

        ALTERNATIVE     "jmp .Lend_\@", "", X86_BUG_ESPFIX

        movl    PT_EFLAGS(%esp), %eax           # mix EFLAGS, SS and CS
        /*
         * Warning: PT_OLDSS(%esp) contains the wrong/random values if we
         * are returning to the kernel.
         * See comments in process.c:copy_thread() for details.
         */
        movb    PT_OLDSS(%esp), %ah
        movb    PT_CS(%esp), %al
        andl    $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
        cmpl    $((SEGMENT_LDT << 8) | USER_RPL), %eax
        jne     .Lend_\@        # returning to user-space with LDT SS

        /*
         * Setup and switch to ESPFIX stack
         *
         * We're returning to userspace with a 16 bit stack. The CPU will not
         * restore the high word of ESP for us on executing iret... This is an
         * "official" bug of all the x86-compatible CPUs, which we can work
         * around to make dosemu and wine happy. We do this by preloading the
         * high word of ESP with the high word of the userspace ESP while
         * compensating for the offset by changing to the ESPFIX segment with
         * a base address that matches for the difference.
         */
        mov     %esp, %edx                      /* load kernel esp */
        mov     PT_OLDESP(%esp), %eax           /* load userspace esp */
        mov     %dx, %ax                        /* eax: new kernel esp */
        sub     %eax, %edx                      /* offset (low word is 0) */
        shr     $16, %edx
        mov     %dl, GDT_ESPFIX_SS + 4          /* bits 16..23 */
        mov     %dh, GDT_ESPFIX_SS + 7          /* bits 24..31 */
        pushl   $__ESPFIX_SS
        pushl   %eax                            /* new kernel esp */
        /*
         * Disable interrupts, but do not irqtrace this section: we
         * will soon execute iret and the tracer was already set to
         * the irqstate after the IRET:
         */
        cli
        lss     (%esp), %esp                    /* switch to espfix segment */
.Lend_\@:
#endif /* CONFIG_X86_ESPFIX32 */
.endm

/*
 * Called with pt_regs fully populated and kernel segments loaded,
 * so we can access PER_CPU and use the integer registers.
 *
 * We need to be very careful here with the %esp switch, because an NMI
 * can happen everywhere. If the NMI handler finds itself on the
 * entry-stack, it will overwrite the task-stack and everything we
 * copied there. So allocate the stack-frame on the task-stack and
 * switch to it before we do any copying.
 */

.macro SWITCH_TO_KERNEL_STACK

        BUG_IF_WRONG_CR3

        SWITCH_TO_KERNEL_CR3 scratch_reg=%eax

        /*
         * %eax now contains the entry cr3 and we carry it forward in
         * that register for the time this macro runs
         */

        /* Are we on the entry stack? Bail out if not! */
        movl    PER_CPU_VAR(cpu_entry_area), %ecx
        addl    $CPU_ENTRY_AREA_entry_stack + SIZEOF_entry_stack, %ecx
        subl    %esp, %ecx      /* ecx = (end of entry_stack) - esp */
        cmpl    $SIZEOF_entry_stack, %ecx
        jae     .Lend_\@

        /* Load stack pointer into %esi and %edi */
        movl    %esp, %esi
        movl    %esi, %edi

        /* Move %edi to the top of the entry stack */
        andl    $(MASK_entry_stack), %edi
        addl    $(SIZEOF_entry_stack), %edi

        /* Load top of task-stack into %edi */
        movl    TSS_entry2task_stack(%edi), %edi

        /* Special case - entry from kernel mode via entry stack */
#ifdef CONFIG_VM86
        movl    PT_EFLAGS(%esp), %ecx           # mix EFLAGS and CS
        movb    PT_CS(%esp), %cl
        andl    $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %ecx
#else
        movl    PT_CS(%esp), %ecx
        andl    $SEGMENT_RPL_MASK, %ecx
#endif
        cmpl    $USER_RPL, %ecx
        jb      .Lentry_from_kernel_\@

        /* Bytes to copy */
        movl    $PTREGS_SIZE, %ecx

#ifdef CONFIG_VM86
        testl   $X86_EFLAGS_VM, PT_EFLAGS(%esi)
        jz      .Lcopy_pt_regs_\@

        /*
         * Stack-frame contains 4 additional segment registers when
         * coming from VM86 mode
         */
        addl    $(4 * 4), %ecx

#endif
.Lcopy_pt_regs_\@:

        /* Allocate frame on task-stack */
        subl    %ecx, %edi

        /* Switch to task-stack */
        movl    %edi, %esp

        /*
         * We are now on the task-stack and can safely copy over the
         * stack-frame
         */
        shrl    $2, %ecx
        cld
        rep movsl

        jmp .Lend_\@

.Lentry_from_kernel_\@:

        /*
         * This handles the case when we enter the kernel from
         * kernel-mode and %esp points to the entry-stack. When this
         * happens we need to switch to the task-stack to run C code,
         * but switch back to the entry-stack again when we approach
         * iret and return to the interrupted code-path. This usually
         * happens when we hit an exception while restoring user-space
         * segment registers on the way back to user-space or when the
         * sysenter handler runs with eflags.tf set.
         *
         * When we switch to the task-stack here, we can't trust the
         * contents of the entry-stack anymore, as the exception handler
         * might be scheduled out or moved to another CPU. Therefore we
         * copy the complete entry-stack to the task-stack and set a
         * marker in the iret-frame (bit 31 of the CS dword) to detect
         * what we've done on the iret path.
         *
         * On the iret path we copy everything back and switch to the
         * entry-stack, so that the interrupted kernel code-path
         * continues on the same stack it was interrupted with.
         *
         * Be aware that an NMI can happen anytime in this code.
         *
         * %esi: Entry-Stack pointer (same as %esp)
         * %edi: Top of the task stack
         * %eax: CR3 on kernel entry
         */

        /* Calculate number of bytes on the entry stack in %ecx */
        movl    %esi, %ecx

        /* %ecx to the top of entry-stack */
        andl    $(MASK_entry_stack), %ecx
        addl    $(SIZEOF_entry_stack), %ecx

        /* Number of bytes on the entry stack to %ecx */
        sub     %esi, %ecx

        /* Mark stackframe as coming from entry stack */
        orl     $CS_FROM_ENTRY_STACK, PT_CS(%esp)

        /*
         * Test the cr3 used to enter the kernel and add a marker
         * so that we can switch back to it before iret.
         */
        testl   $PTI_SWITCH_MASK, %eax
        jz      .Lcopy_pt_regs_\@
        orl     $CS_FROM_USER_CR3, PT_CS(%esp)

        /*
         * %esi and %edi are unchanged, %ecx contains the number of
         * bytes to copy. The code at .Lcopy_pt_regs_\@ will allocate
         * the stack-frame on task-stack and copy everything over
         */
        jmp .Lcopy_pt_regs_\@

.Lend_\@:
.endm

/*
 * Switch back from the kernel stack to the entry stack.
 *
 * The %esp register must point to pt_regs on the task stack. It will
 * first calculate the size of the stack-frame to copy, depending on
 * whether we return to VM86 mode or not. With that it uses 'rep movsl'
 * to copy the contents of the stack over to the entry stack.
 *
 * We must be very careful here, as we can't trust the contents of the
 * task-stack once we switched to the entry-stack. When an NMI happens
 * while on the entry-stack, the NMI handler will switch back to the top
 * of the task stack, overwriting our stack-frame we are about to copy.
 * Therefore we switch the stack only after everything is copied over.
 */
.macro SWITCH_TO_ENTRY_STACK

        /* Bytes to copy */
        movl    $PTREGS_SIZE, %ecx

#ifdef CONFIG_VM86
        testl   $(X86_EFLAGS_VM), PT_EFLAGS(%esp)
        jz      .Lcopy_pt_regs_\@

        /* Additional 4 registers to copy when returning to VM86 mode */
        addl    $(4 * 4), %ecx

.Lcopy_pt_regs_\@:
#endif

        /* Initialize source and destination for movsl */
        movl    PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %edi
        subl    %ecx, %edi
        movl    %esp, %esi

        /* Save future stack pointer in %ebx */
        movl    %edi, %ebx

        /* Copy over the stack-frame */
        shrl    $2, %ecx
        cld
        rep movsl

        /*
         * Switch to entry-stack - needs to happen after everything is
         * copied because the NMI handler will overwrite the task-stack
         * when on entry-stack
         */
        movl    %ebx, %esp

.Lend_\@:
.endm

/*
 * This macro handles the case when we return to kernel-mode on the iret
 * path and have to switch back to the entry stack and/or user-cr3
 *
 * See the comments below the .Lentry_from_kernel_\@ label in the
 * SWITCH_TO_KERNEL_STACK macro for more details.
 */
.macro PARANOID_EXIT_TO_KERNEL_MODE

        /*
         * Test if we entered the kernel with the entry-stack. Most
         * likely we did not, because this code only runs on the
         * return-to-kernel path.
         */
        testl   $CS_FROM_ENTRY_STACK, PT_CS(%esp)
        jz      .Lend_\@

        /* Unlikely slow-path */

        /* Clear marker from stack-frame */
        andl    $(~CS_FROM_ENTRY_STACK), PT_CS(%esp)

        /* Copy the remaining task-stack contents to entry-stack */
        movl    %esp, %esi
        movl    PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %edi

        /* Bytes on the task-stack to ecx */
        movl    PER_CPU_VAR(cpu_tss_rw + TSS_sp1), %ecx
        subl    %esi, %ecx

        /* Allocate stack-frame on entry-stack */
        subl    %ecx, %edi

        /*
         * Save future stack-pointer, we must not switch until the
         * copy is done, otherwise the NMI handler could destroy the
         * contents of the task-stack we are about to copy.
         */
        movl    %edi, %ebx

        /* Do the copy */
        shrl    $2, %ecx
        cld
        rep movsl

        /* Safe to switch to entry-stack now */
        movl    %ebx, %esp

        /*
         * We came from entry-stack and need to check if we also need to
         * switch back to user cr3.
         */
        testl   $CS_FROM_USER_CR3, PT_CS(%esp)
        jz      .Lend_\@

        /* Clear marker from stack-frame */
        andl    $(~CS_FROM_USER_CR3), PT_CS(%esp)

        SWITCH_TO_USER_CR3 scratch_reg=%eax

.Lend_\@:
.endm

/**
 * idtentry - Macro to generate entry stubs for simple IDT entries
 * @vector:             Vector number
 * @asmsym:             ASM symbol for the entry point
 * @cfunc:              C function to be called
 * @has_error_code:     Hardware pushed error code on stack
 */
.macro idtentry vector asmsym cfunc has_error_code:req
SYM_CODE_START(\asmsym)
        ASM_CLAC
        cld

        .if \has_error_code == 0
                pushl   $0              /* Clear the error code */
        .endif

        /* Push the C-function address into the GS slot */
        pushl   $\cfunc
        /* Invoke the common exception entry */
        jmp     handle_exception
SYM_CODE_END(\asmsym)
.endm

.macro idtentry_irq vector cfunc
        .p2align CONFIG_X86_L1_CACHE_SHIFT
SYM_CODE_START_LOCAL(asm_\cfunc)
        ASM_CLAC
        SAVE_ALL switch_stacks=1
        ENCODE_FRAME_POINTER
        movl    %esp, %eax
        movl    PT_ORIG_EAX(%esp), %edx         /* get the vector from stack */
        movl    $-1, PT_ORIG_EAX(%esp)          /* no syscall to restart */
        call    \cfunc
        jmp     handle_exception_return
SYM_CODE_END(asm_\cfunc)
.endm

.macro idtentry_sysvec vector cfunc
        idtentry \vector asm_\cfunc \cfunc has_error_code=0
.endm

/*
 * Include the defines which emit the idt entries which are shared
 * shared between 32 and 64 bit and emit the __irqentry_text_* markers
 * so the stacktrace boundary checks work.
 */
        .align 16
        .globl __irqentry_text_start
__irqentry_text_start:

#include <asm/idtentry.h>

        .align 16
        .globl __irqentry_text_end
__irqentry_text_end:

/*
 * %eax: prev task
 * %edx: next task
 */
.pushsection .text, "ax"
SYM_CODE_START(__switch_to_asm)
        /*
         * Save callee-saved registers
         * This must match the order in struct inactive_task_frame
         */
        pushl   %ebp
        pushl   %ebx
        pushl   %edi
        pushl   %esi
        /*
         * Flags are saved to prevent AC leakage. This could go
         * away if objtool would have 32bit support to verify
         * the STAC/CLAC correctness.
         */
        pushfl

        /* switch stack */
        movl    %esp, TASK_threadsp(%eax)
        movl    TASK_threadsp(%edx), %esp

#ifdef CONFIG_STACKPROTECTOR
        movl    TASK_stack_canary(%edx), %ebx
        movl    %ebx, PER_CPU_VAR(__stack_chk_guard)
#endif

        /*
         * When switching from a shallower to a deeper call stack
         * the RSB may either underflow or use entries populated
         * with userspace addresses. On CPUs where those concerns
         * exist, overwrite the RSB with entries which capture
         * speculative execution to prevent attack.
         */
        FILL_RETURN_BUFFER %ebx, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW

        /* Restore flags or the incoming task to restore AC state. */
        popfl
        /* restore callee-saved registers */
        popl    %esi
        popl    %edi
        popl    %ebx
        popl    %ebp

        jmp     __switch_to
SYM_CODE_END(__switch_to_asm)
.popsection

/*
 * The unwinder expects the last frame on the stack to always be at the same
 * offset from the end of the page, which allows it to validate the stack.
 * Calling schedule_tail() directly would break that convention because its an
 * asmlinkage function so its argument has to be pushed on the stack.  This
 * wrapper creates a proper "end of stack" frame header before the call.
 */
.pushsection .text, "ax"
SYM_FUNC_START(schedule_tail_wrapper)
        FRAME_BEGIN

        pushl   %eax
        call    schedule_tail
        popl    %eax

        FRAME_END
        RET
SYM_FUNC_END(schedule_tail_wrapper)
.popsection

/*
 * A newly forked process directly context switches into this address.
 *
 * eax: prev task we switched from
 * ebx: kernel thread func (NULL for user thread)
 * edi: kernel thread arg
 */
.pushsection .text, "ax"
SYM_CODE_START(ret_from_fork)
        call    schedule_tail_wrapper

        testl   %ebx, %ebx
        jnz     1f              /* kernel threads are uncommon */

2:
        /* When we fork, we trace the syscall return in the child, too. */
        movl    %esp, %eax
        call    syscall_exit_to_user_mode
        jmp     .Lsyscall_32_done

        /* kernel thread */
1:      movl    %edi, %eax
        CALL_NOSPEC ebx
        /*
         * A kernel thread is allowed to return here after successfully
         * calling kernel_execve().  Exit to userspace to complete the execve()
         * syscall.
         */
        movl    $0, PT_EAX(%esp)
        jmp     2b
SYM_CODE_END(ret_from_fork)
.popsection

SYM_ENTRY(__begin_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
/*
 * All code from here through __end_SYSENTER_singlestep_region is subject
 * to being single-stepped if a user program sets TF and executes SYSENTER.
 * There is absolutely nothing that we can do to prevent this from happening
 * (thanks Intel!).  To keep our handling of this situation as simple as
 * possible, we handle TF just like AC and NT, except that our #DB handler
 * will ignore all of the single-step traps generated in this range.
 */

/*
 * 32-bit SYSENTER entry.
 *
 * 32-bit system calls through the vDSO's __kernel_vsyscall enter here
 * if X86_FEATURE_SEP is available.  This is the preferred system call
 * entry on 32-bit systems.
 *
 * The SYSENTER instruction, in principle, should *only* occur in the
 * vDSO.  In practice, a small number of Android devices were shipped
 * with a copy of Bionic that inlined a SYSENTER instruction.  This
 * never happened in any of Google's Bionic versions -- it only happened
 * in a narrow range of Intel-provided versions.
 *
 * SYSENTER loads SS, ESP, CS, and EIP from previously programmed MSRs.
 * IF and VM in RFLAGS are cleared (IOW: interrupts are off).
 * SYSENTER does not save anything on the stack,
 * and does not save old EIP (!!!), ESP, or EFLAGS.
 *
 * To avoid losing track of EFLAGS.VM (and thus potentially corrupting
 * user and/or vm86 state), we explicitly disable the SYSENTER
 * instruction in vm86 mode by reprogramming the MSRs.
 *
 * Arguments:
 * eax  system call number
 * ebx  arg1
 * ecx  arg2
 * edx  arg3
 * esi  arg4
 * edi  arg5
 * ebp  user stack
 * 0(%ebp) arg6
 */
SYM_FUNC_START(entry_SYSENTER_32)
        /*
         * On entry-stack with all userspace-regs live - save and
         * restore eflags and %eax to use it as scratch-reg for the cr3
         * switch.
         */
        pushfl
        pushl   %eax
        BUG_IF_WRONG_CR3 no_user_check=1
        SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
        popl    %eax
        popfl

        /* Stack empty again, switch to task stack */
        movl    TSS_entry2task_stack(%esp), %esp

.Lsysenter_past_esp:
        pushl   $__USER_DS              /* pt_regs->ss */
        pushl   $0                      /* pt_regs->sp (placeholder) */
        pushfl                          /* pt_regs->flags (except IF = 0) */
        pushl   $__USER_CS              /* pt_regs->cs */
        pushl   $0                      /* pt_regs->ip = 0 (placeholder) */
        pushl   %eax                    /* pt_regs->orig_ax */
        SAVE_ALL pt_regs_ax=$-ENOSYS    /* save rest, stack already switched */

        /*
         * SYSENTER doesn't filter flags, so we need to clear NT, AC
         * and TF ourselves.  To save a few cycles, we can check whether
         * either was set instead of doing an unconditional popfq.
         * This needs to happen before enabling interrupts so that
         * we don't get preempted with NT set.
         *
         * If TF is set, we will single-step all the way to here -- do_debug
         * will ignore all the traps.  (Yes, this is slow, but so is
         * single-stepping in general.  This allows us to avoid having
         * a more complicated code to handle the case where a user program
         * forces us to single-step through the SYSENTER entry code.)
         *
         * NB.: .Lsysenter_fix_flags is a label with the code under it moved
         * out-of-line as an optimization: NT is unlikely to be set in the
         * majority of the cases and instead of polluting the I$ unnecessarily,
         * we're keeping that code behind a branch which will predict as
         * not-taken and therefore its instructions won't be fetched.
         */
        testl   $X86_EFLAGS_NT|X86_EFLAGS_AC|X86_EFLAGS_TF, PT_EFLAGS(%esp)
        jnz     .Lsysenter_fix_flags
.Lsysenter_flags_fixed:

        movl    %esp, %eax
        call    do_SYSENTER_32
        testl   %eax, %eax
        jz      .Lsyscall_32_done

        STACKLEAK_ERASE

        /* Opportunistic SYSEXIT */

        /*
         * Setup entry stack - we keep the pointer in %eax and do the
         * switch after almost all user-state is restored.
         */

        /* Load entry stack pointer and allocate frame for eflags/eax */
        movl    PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %eax
        subl    $(2*4), %eax

        /* Copy eflags and eax to entry stack */
        movl    PT_EFLAGS(%esp), %edi
        movl    PT_EAX(%esp), %esi
        movl    %edi, (%eax)
        movl    %esi, 4(%eax)

        /* Restore user registers and segments */
        movl    PT_EIP(%esp), %edx      /* pt_regs->ip */
        movl    PT_OLDESP(%esp), %ecx   /* pt_regs->sp */
1:      mov     PT_FS(%esp), %fs

        popl    %ebx                    /* pt_regs->bx */
        addl    $2*4, %esp              /* skip pt_regs->cx and pt_regs->dx */
        popl    %esi                    /* pt_regs->si */
        popl    %edi                    /* pt_regs->di */
        popl    %ebp                    /* pt_regs->bp */

        /* Switch to entry stack */
        movl    %eax, %esp

        /* Now ready to switch the cr3 */
        SWITCH_TO_USER_CR3 scratch_reg=%eax

        /*
         * Restore all flags except IF. (We restore IF separately because
         * STI gives a one-instruction window in which we won't be interrupted,
         * whereas POPF does not.)
         */
        btrl    $X86_EFLAGS_IF_BIT, (%esp)
        BUG_IF_WRONG_CR3 no_user_check=1
        popfl
        popl    %eax

        /*
         * Return back to the vDSO, which will pop ecx and edx.
         * Don't bother with DS and ES (they already contain __USER_DS).
         */
        sti
        sysexit

2:      movl    $0, PT_FS(%esp)
        jmp     1b
        _ASM_EXTABLE(1b, 2b)

.Lsysenter_fix_flags:
        pushl   $X86_EFLAGS_FIXED
        popfl
        jmp     .Lsysenter_flags_fixed
SYM_ENTRY(__end_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
SYM_FUNC_END(entry_SYSENTER_32)

/*
 * 32-bit legacy system call entry.
 *
 * 32-bit x86 Linux system calls traditionally used the INT $0x80
 * instruction.  INT $0x80 lands here.
 *
 * This entry point can be used by any 32-bit perform system calls.
 * Instances of INT $0x80 can be found inline in various programs and
 * libraries.  It is also used by the vDSO's __kernel_vsyscall
 * fallback for hardware that doesn't support a faster entry method.
 * Restarted 32-bit system calls also fall back to INT $0x80
 * regardless of what instruction was originally used to do the system
 * call.  (64-bit programs can use INT $0x80 as well, but they can
 * only run on 64-bit kernels and therefore land in
 * entry_INT80_compat.)
 *
 * This is considered a slow path.  It is not used by most libc
 * implementations on modern hardware except during process startup.
 *
 * Arguments:
 * eax  system call number
 * ebx  arg1
 * ecx  arg2
 * edx  arg3
 * esi  arg4
 * edi  arg5
 * ebp  arg6
 */
SYM_FUNC_START(entry_INT80_32)
        ASM_CLAC
        pushl   %eax                    /* pt_regs->orig_ax */

        SAVE_ALL pt_regs_ax=$-ENOSYS switch_stacks=1    /* save rest */

        movl    %esp, %eax
        call    do_int80_syscall_32
.Lsyscall_32_done:
        STACKLEAK_ERASE

restore_all_switch_stack:
        SWITCH_TO_ENTRY_STACK
        CHECK_AND_APPLY_ESPFIX

        /* Switch back to user CR3 */
        SWITCH_TO_USER_CR3 scratch_reg=%eax

        BUG_IF_WRONG_CR3

        /* Restore user state */
        RESTORE_REGS pop=4                      # skip orig_eax/error_code
.Lirq_return:
        /*
         * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization
         * when returning from IPI handler and when returning from
         * scheduler to user-space.
         */
        iret

.Lasm_iret_error:
        pushl   $0                              # no error code
        pushl   $iret_error

#ifdef CONFIG_DEBUG_ENTRY
        /*
         * The stack-frame here is the one that iret faulted on, so its a
         * return-to-user frame. We are on kernel-cr3 because we come here from
         * the fixup code. This confuses the CR3 checker, so switch to user-cr3
         * as the checker expects it.
         */
        pushl   %eax
        SWITCH_TO_USER_CR3 scratch_reg=%eax
        popl    %eax
#endif

        jmp     handle_exception

        _ASM_EXTABLE(.Lirq_return, .Lasm_iret_error)
SYM_FUNC_END(entry_INT80_32)

.macro FIXUP_ESPFIX_STACK
/*
 * Switch back for ESPFIX stack to the normal zerobased stack
 *
 * We can't call C functions using the ESPFIX stack. This code reads
 * the high word of the segment base from the GDT and swiches to the
 * normal stack and adjusts ESP with the matching offset.
 *
 * We might be on user CR3 here, so percpu data is not mapped and we can't
 * access the GDT through the percpu segment.  Instead, use SGDT to find
 * the cpu_entry_area alias of the GDT.
 */
#ifdef CONFIG_X86_ESPFIX32
        /* fixup the stack */
        pushl   %ecx
        subl    $2*4, %esp
        sgdt    (%esp)
        movl    2(%esp), %ecx                           /* GDT address */
        /*
         * Careful: ECX is a linear pointer, so we need to force base
         * zero.  %cs is the only known-linear segment we have right now.
         */
        mov     %cs:GDT_ESPFIX_OFFSET + 4(%ecx), %al    /* bits 16..23 */
        mov     %cs:GDT_ESPFIX_OFFSET + 7(%ecx), %ah    /* bits 24..31 */
        shl     $16, %eax
        addl    $2*4, %esp
        popl    %ecx
        addl    %esp, %eax                      /* the adjusted stack pointer */
        pushl   $__KERNEL_DS
        pushl   %eax
        lss     (%esp), %esp                    /* switch to the normal stack segment */
#endif
.endm

.macro UNWIND_ESPFIX_STACK
        /* It's safe to clobber %eax, all other regs need to be preserved */
#ifdef CONFIG_X86_ESPFIX32
        movl    %ss, %eax
        /* see if on espfix stack */
        cmpw    $__ESPFIX_SS, %ax
        jne     .Lno_fixup_\@
        /* switch to normal stack */
        FIXUP_ESPFIX_STACK
.Lno_fixup_\@:
#endif
.endm

SYM_CODE_START_LOCAL_NOALIGN(handle_exception)
        /* the function address is in %gs's slot on the stack */
        SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1
        ENCODE_FRAME_POINTER

        movl    PT_GS(%esp), %edi               # get the function address

        /* fixup orig %eax */
        movl    PT_ORIG_EAX(%esp), %edx         # get the error code
        movl    $-1, PT_ORIG_EAX(%esp)          # no syscall to restart

        movl    %esp, %eax                      # pt_regs pointer
        CALL_NOSPEC edi

handle_exception_return:
#ifdef CONFIG_VM86
        movl    PT_EFLAGS(%esp), %eax           # mix EFLAGS and CS
        movb    PT_CS(%esp), %al
        andl    $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
#else
        /*
         * We can be coming here from child spawned by kernel_thread().
         */
        movl    PT_CS(%esp), %eax
        andl    $SEGMENT_RPL_MASK, %eax
#endif
        cmpl    $USER_RPL, %eax                 # returning to v8086 or userspace ?
        jnb     ret_to_user

        PARANOID_EXIT_TO_KERNEL_MODE
        BUG_IF_WRONG_CR3
        RESTORE_REGS 4
        jmp     .Lirq_return

ret_to_user:
        movl    %esp, %eax
        jmp     restore_all_switch_stack
SYM_CODE_END(handle_exception)

SYM_CODE_START(asm_exc_double_fault)
1:
        /*
         * This is a task gate handler, not an interrupt gate handler.
         * The error code is on the stack, but the stack is otherwise
         * empty.  Interrupts are off.  Our state is sane with the following
         * exceptions:
         *
         *  - CR0.TS is set.  "TS" literally means "task switched".
         *  - EFLAGS.NT is set because we're a "nested task".
         *  - The doublefault TSS has back_link set and has been marked busy.
         *  - TR points to the doublefault TSS and the normal TSS is busy.
         *  - CR3 is the normal kernel PGD.  This would be delightful, except
         *    that the CPU didn't bother to save the old CR3 anywhere.  This
         *    would make it very awkward to return back to the context we came
         *    from.
         *
         * The rest of EFLAGS is sanitized for us, so we don't need to
         * worry about AC or DF.
         *
         * Don't even bother popping the error code.  It's always zero,
         * and ignoring it makes us a bit more robust against buggy
         * hypervisor task gate implementations.
         *
         * We will manually undo the task switch instead of doing a
         * task-switching IRET.
         */

        clts                            /* clear CR0.TS */
        pushl   $X86_EFLAGS_FIXED
        popfl                           /* clear EFLAGS.NT */

        call    doublefault_shim

        /* We don't support returning, so we have no IRET here. */
1:
        hlt
        jmp 1b
SYM_CODE_END(asm_exc_double_fault)

/*
 * NMI is doubly nasty.  It can happen on the first instruction of
 * entry_SYSENTER_32 (just like #DB), but it can also interrupt the beginning
 * of the #DB handler even if that #DB in turn hit before entry_SYSENTER_32
 * switched stacks.  We handle both conditions by simply checking whether we
 * interrupted kernel code running on the SYSENTER stack.
 */
SYM_CODE_START(asm_exc_nmi)
        ASM_CLAC

#ifdef CONFIG_X86_ESPFIX32
        /*
         * ESPFIX_SS is only ever set on the return to user path
         * after we've switched to the entry stack.
         */
        pushl   %eax
        movl    %ss, %eax
        cmpw    $__ESPFIX_SS, %ax
        popl    %eax
        je      .Lnmi_espfix_stack
#endif

        pushl   %eax                            # pt_regs->orig_ax
        SAVE_ALL_NMI cr3_reg=%edi
        ENCODE_FRAME_POINTER
        xorl    %edx, %edx                      # zero error code
        movl    %esp, %eax                      # pt_regs pointer

        /* Are we currently on the SYSENTER stack? */
        movl    PER_CPU_VAR(cpu_entry_area), %ecx
        addl    $CPU_ENTRY_AREA_entry_stack + SIZEOF_entry_stack, %ecx
        subl    %eax, %ecx      /* ecx = (end of entry_stack) - esp */
        cmpl    $SIZEOF_entry_stack, %ecx
        jb      .Lnmi_from_sysenter_stack

        /* Not on SYSENTER stack. */
        call    exc_nmi
        jmp     .Lnmi_return

.Lnmi_from_sysenter_stack:
        /*
         * We're on the SYSENTER stack.  Switch off.  No one (not even debug)
         * is using the thread stack right now, so it's safe for us to use it.
         */
        movl    %esp, %ebx
        movl    PER_CPU_VAR(cpu_current_top_of_stack), %esp
        call    exc_nmi
        movl    %ebx, %esp

.Lnmi_return:
#ifdef CONFIG_X86_ESPFIX32
        testl   $CS_FROM_ESPFIX, PT_CS(%esp)
        jnz     .Lnmi_from_espfix
#endif

        CHECK_AND_APPLY_ESPFIX
        RESTORE_ALL_NMI cr3_reg=%edi pop=4
        jmp     .Lirq_return

#ifdef CONFIG_X86_ESPFIX32
.Lnmi_espfix_stack:
        /*
         * Create the pointer to LSS back
         */
        pushl   %ss
        pushl   %esp
        addl    $4, (%esp)

        /* Copy the (short) IRET frame */
        pushl   4*4(%esp)       # flags
        pushl   4*4(%esp)       # cs
        pushl   4*4(%esp)       # ip

        pushl   %eax            # orig_ax

        SAVE_ALL_NMI cr3_reg=%edi unwind_espfix=1
        ENCODE_FRAME_POINTER

        /* clear CS_FROM_KERNEL, set CS_FROM_ESPFIX */
        xorl    $(CS_FROM_ESPFIX | CS_FROM_KERNEL), PT_CS(%esp)

        xorl    %edx, %edx                      # zero error code
        movl    %esp, %eax                      # pt_regs pointer
        jmp     .Lnmi_from_sysenter_stack

.Lnmi_from_espfix:
        RESTORE_ALL_NMI cr3_reg=%edi
        /*
         * Because we cleared CS_FROM_KERNEL, IRET_FRAME 'forgot' to
         * fix up the gap and long frame:
         *
         *  3 - original frame  (exception)
         *  2 - ESPFIX block    (above)
         *  6 - gap             (FIXUP_FRAME)
         *  5 - long frame      (FIXUP_FRAME)
         *  1 - orig_ax
         */
        lss     (1+5+6)*4(%esp), %esp                   # back to espfix stack
        jmp     .Lirq_return
#endif
SYM_CODE_END(asm_exc_nmi)

.pushsection .text, "ax"
SYM_CODE_START(rewind_stack_and_make_dead)
        /* Prevent any naive code from trying to unwind to our caller. */
        xorl    %ebp, %ebp

        movl    PER_CPU_VAR(cpu_current_top_of_stack), %esi
        leal    -TOP_OF_KERNEL_STACK_PADDING-PTREGS_SIZE(%esi), %esp

        call    make_task_dead
1:      jmp 1b
SYM_CODE_END(rewind_stack_and_make_dead)
.popsection