1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 1995 Linus Torvalds
4 * Adapted from 'alpha' version by Gary Thomas
5 * Modified by Cort Dougan (cort@cs.nmt.edu)
6 * Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
7 * Further modified for generic 8xx by Dan.
11 * bootup setup stuff..
14 #include <linux/kernel.h>
15 #include <linux/interrupt.h>
16 #include <linux/init.h>
17 #include <linux/time.h>
18 #include <linux/rtc.h>
19 #include <linux/fsl_devices.h>
22 #include <asm/8xx_immap.h>
24 #include <asm/fs_pd.h>
25 #include <mm/mmu_decl.h>
31 extern int cpm_pic_init(void);
32 extern int cpm_get_irq(void);
34 /* A place holder for time base interrupts, if they are ever enabled. */
35 static irqreturn_t timebase_interrupt(int irq, void *dev)
37 printk ("timebase_interrupt()\n");
42 /* per-board overridable init_internal_rtc() function. */
43 void __init __attribute__ ((weak))
44 init_internal_rtc(void)
46 sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
48 /* Disable the RTC one second and alarm interrupts. */
49 clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
52 setbits16(&sys_tmr->sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
56 static int __init get_freq(char *name, unsigned long *val)
58 struct device_node *cpu;
59 const unsigned int *fp;
62 /* The cpu node should have timebase and clock frequency properties */
63 cpu = of_get_cpu_node(0, NULL);
66 fp = of_get_property(cpu, name, NULL);
78 /* The decrementer counts at the system (internal) clock frequency divided by
79 * sixteen, or external oscillator divided by four. We force the processor
80 * to use system clock divided by sixteen.
82 void __init mpc8xx_calibrate_decr(void)
84 struct device_node *cpu;
85 cark8xx_t __iomem *clk_r1;
86 car8xx_t __iomem *clk_r2;
87 sitk8xx_t __iomem *sys_tmr1;
88 sit8xx_t __iomem *sys_tmr2;
91 clk_r1 = immr_map(im_clkrstk);
93 /* Unlock the SCCR. */
94 out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY);
95 out_be32(&clk_r1->cark_sccrk, KAPWR_KEY);
98 /* Force all 8xx processors to use divide by 16 processor clock. */
99 clk_r2 = immr_map(im_clkrst);
100 setbits32(&clk_r2->car_sccr, 0x02000000);
103 /* Processor frequency is MHz.
105 ppc_proc_freq = 50000000;
106 if (!get_freq("clock-frequency", &ppc_proc_freq))
107 printk(KERN_ERR "WARNING: Estimating processor frequency "
110 ppc_tb_freq = ppc_proc_freq / 16;
111 printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
113 /* Perform some more timer/timebase initialization. This used
114 * to be done elsewhere, but other changes caused it to get
115 * called more than once....that is a bad thing.
117 * First, unlock all of the registers we are going to modify.
118 * To protect them from corruption during power down, registers
119 * that are maintained by keep alive power are "locked". To
120 * modify these registers we have to write the key value to
121 * the key location associated with the register.
122 * Some boards power up with these unlocked, while others
123 * are locked. Writing anything (including the unlock code?)
124 * to the unlocked registers will lock them again. So, here
125 * we guarantee the registers are locked, then we unlock them
128 sys_tmr1 = immr_map(im_sitk);
129 out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY);
130 out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY);
131 out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY);
132 out_be32(&sys_tmr1->sitk_tbscrk, KAPWR_KEY);
133 out_be32(&sys_tmr1->sitk_rtcsck, KAPWR_KEY);
134 out_be32(&sys_tmr1->sitk_tbk, KAPWR_KEY);
135 immr_unmap(sys_tmr1);
139 /* Enabling the decrementer also enables the timebase interrupts
140 * (or from the other point of view, to get decrementer interrupts
141 * we have to enable the timebase). The decrementer interrupt
142 * is wired into the vector table, nothing to do here for that.
144 cpu = of_get_cpu_node(0, NULL);
145 virq= irq_of_parse_and_map(cpu, 0);
147 irq = virq_to_hw(virq);
149 sys_tmr2 = immr_map(im_sit);
150 out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) |
151 (TBSCR_TBF | TBSCR_TBE));
152 immr_unmap(sys_tmr2);
154 if (request_irq(virq, timebase_interrupt, IRQF_NO_THREAD, "tbint",
156 panic("Could not allocate timer IRQ!");
159 /* The RTC on the MPC8xx is an internal register.
160 * We want to protect this during power down, so we need to unlock,
161 * modify, and re-lock.
164 int mpc8xx_set_rtc_time(struct rtc_time *tm)
166 sitk8xx_t __iomem *sys_tmr1;
167 sit8xx_t __iomem *sys_tmr2;
170 sys_tmr1 = immr_map(im_sitk);
171 sys_tmr2 = immr_map(im_sit);
172 time = rtc_tm_to_time64(tm);
174 out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY);
175 out_be32(&sys_tmr2->sit_rtc, (u32)time);
176 out_be32(&sys_tmr1->sitk_rtck, ~KAPWR_KEY);
178 immr_unmap(sys_tmr2);
179 immr_unmap(sys_tmr1);
183 void mpc8xx_get_rtc_time(struct rtc_time *tm)
186 sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
188 /* Get time from the RTC. */
189 data = in_be32(&sys_tmr->sit_rtc);
190 rtc_time64_to_tm(data, tm);
195 void __noreturn mpc8xx_restart(char *cmd)
197 car8xx_t __iomem *clk_r = immr_map(im_clkrst);
202 setbits32(&clk_r->car_plprcr, 0x00000080);
203 /* Clear the ME bit in MSR to cause checkstop on machine check
205 mtmsr(mfmsr() & ~0x1000);
207 in_8(&clk_r->res[0]);
208 panic("Restart failed\n");
211 static void cpm_cascade(struct irq_desc *desc)
213 generic_handle_irq(cpm_get_irq());
216 /* Initialize the internal interrupt controllers. The number of
217 * interrupts supported can vary with the processor type, and the
218 * 82xx family can have up to 64.
219 * External interrupts can be either edge or level triggered, and
220 * need to be initialized by the appropriate driver.
222 void __init mpc8xx_pics_init(void)
226 if (mpc8xx_pic_init()) {
227 printk(KERN_ERR "Failed interrupt 8xx controller initialization\n");
231 irq = cpm_pic_init();
233 irq_set_chained_handler(irq, cpm_cascade);