clocksource: Make clocksource watchdog test safe for slow-HZ systems
[linux-2.6-microblaze.git] / arch / powerpc / kernel / rtasd.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
4  *
5  * Communication to userspace based on kernel/printk.c
6  */
7
8 #include <linux/types.h>
9 #include <linux/errno.h>
10 #include <linux/sched.h>
11 #include <linux/kernel.h>
12 #include <linux/poll.h>
13 #include <linux/proc_fs.h>
14 #include <linux/init.h>
15 #include <linux/vmalloc.h>
16 #include <linux/spinlock.h>
17 #include <linux/cpu.h>
18 #include <linux/workqueue.h>
19 #include <linux/slab.h>
20 #include <linux/topology.h>
21
22 #include <linux/uaccess.h>
23 #include <asm/io.h>
24 #include <asm/rtas.h>
25 #include <asm/prom.h>
26 #include <asm/nvram.h>
27 #include <linux/atomic.h>
28 #include <asm/machdep.h>
29 #include <asm/topology.h>
30
31
32 static DEFINE_SPINLOCK(rtasd_log_lock);
33
34 static DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
35
36 static char *rtas_log_buf;
37 static unsigned long rtas_log_start;
38 static unsigned long rtas_log_size;
39
40 static int surveillance_timeout = -1;
41
42 static unsigned int rtas_error_log_max;
43 static unsigned int rtas_error_log_buffer_max;
44
45 /* RTAS service tokens */
46 static unsigned int event_scan;
47 static unsigned int rtas_event_scan_rate;
48
49 static bool full_rtas_msgs;
50
51 /* Stop logging to nvram after first fatal error */
52 static int logging_enabled; /* Until we initialize everything,
53                              * make sure we don't try logging
54                              * anything */
55 static int error_log_cnt;
56
57 /*
58  * Since we use 32 bit RTAS, the physical address of this must be below
59  * 4G or else bad things happen. Allocate this in the kernel data and
60  * make it big enough.
61  */
62 static unsigned char logdata[RTAS_ERROR_LOG_MAX];
63
64 static char *rtas_type[] = {
65         "Unknown", "Retry", "TCE Error", "Internal Device Failure",
66         "Timeout", "Data Parity", "Address Parity", "Cache Parity",
67         "Address Invalid", "ECC Uncorrected", "ECC Corrupted",
68 };
69
70 static char *rtas_event_type(int type)
71 {
72         if ((type > 0) && (type < 11))
73                 return rtas_type[type];
74
75         switch (type) {
76                 case RTAS_TYPE_EPOW:
77                         return "EPOW";
78                 case RTAS_TYPE_PLATFORM:
79                         return "Platform Error";
80                 case RTAS_TYPE_IO:
81                         return "I/O Event";
82                 case RTAS_TYPE_INFO:
83                         return "Platform Information Event";
84                 case RTAS_TYPE_DEALLOC:
85                         return "Resource Deallocation Event";
86                 case RTAS_TYPE_DUMP:
87                         return "Dump Notification Event";
88                 case RTAS_TYPE_PRRN:
89                         return "Platform Resource Reassignment Event";
90                 case RTAS_TYPE_HOTPLUG:
91                         return "Hotplug Event";
92         }
93
94         return rtas_type[0];
95 }
96
97 /* To see this info, grep RTAS /var/log/messages and each entry
98  * will be collected together with obvious begin/end.
99  * There will be a unique identifier on the begin and end lines.
100  * This will persist across reboots.
101  *
102  * format of error logs returned from RTAS:
103  * bytes        (size)  : contents
104  * --------------------------------------------------------
105  * 0-7          (8)     : rtas_error_log
106  * 8-47         (40)    : extended info
107  * 48-51        (4)     : vendor id
108  * 52-1023 (vendor specific) : location code and debug data
109  */
110 static void printk_log_rtas(char *buf, int len)
111 {
112
113         int i,j,n = 0;
114         int perline = 16;
115         char buffer[64];
116         char * str = "RTAS event";
117
118         if (full_rtas_msgs) {
119                 printk(RTAS_DEBUG "%d -------- %s begin --------\n",
120                        error_log_cnt, str);
121
122                 /*
123                  * Print perline bytes on each line, each line will start
124                  * with RTAS and a changing number, so syslogd will
125                  * print lines that are otherwise the same.  Separate every
126                  * 4 bytes with a space.
127                  */
128                 for (i = 0; i < len; i++) {
129                         j = i % perline;
130                         if (j == 0) {
131                                 memset(buffer, 0, sizeof(buffer));
132                                 n = sprintf(buffer, "RTAS %d:", i/perline);
133                         }
134
135                         if ((i % 4) == 0)
136                                 n += sprintf(buffer+n, " ");
137
138                         n += sprintf(buffer+n, "%02x", (unsigned char)buf[i]);
139
140                         if (j == (perline-1))
141                                 printk(KERN_DEBUG "%s\n", buffer);
142                 }
143                 if ((i % perline) != 0)
144                         printk(KERN_DEBUG "%s\n", buffer);
145
146                 printk(RTAS_DEBUG "%d -------- %s end ----------\n",
147                        error_log_cnt, str);
148         } else {
149                 struct rtas_error_log *errlog = (struct rtas_error_log *)buf;
150
151                 printk(RTAS_DEBUG "event: %d, Type: %s (%d), Severity: %d\n",
152                        error_log_cnt,
153                        rtas_event_type(rtas_error_type(errlog)),
154                        rtas_error_type(errlog),
155                        rtas_error_severity(errlog));
156         }
157 }
158
159 static int log_rtas_len(char * buf)
160 {
161         int len;
162         struct rtas_error_log *err;
163         uint32_t extended_log_length;
164
165         /* rtas fixed header */
166         len = 8;
167         err = (struct rtas_error_log *)buf;
168         extended_log_length = rtas_error_extended_log_length(err);
169         if (rtas_error_extended(err) && extended_log_length) {
170
171                 /* extended header */
172                 len += extended_log_length;
173         }
174
175         if (rtas_error_log_max == 0)
176                 rtas_error_log_max = rtas_get_error_log_max();
177
178         if (len > rtas_error_log_max)
179                 len = rtas_error_log_max;
180
181         return len;
182 }
183
184 /*
185  * First write to nvram, if fatal error, that is the only
186  * place we log the info.  The error will be picked up
187  * on the next reboot by rtasd.  If not fatal, run the
188  * method for the type of error.  Currently, only RTAS
189  * errors have methods implemented, but in the future
190  * there might be a need to store data in nvram before a
191  * call to panic().
192  *
193  * XXX We write to nvram periodically, to indicate error has
194  * been written and sync'd, but there is a possibility
195  * that if we don't shutdown correctly, a duplicate error
196  * record will be created on next reboot.
197  */
198 void pSeries_log_error(char *buf, unsigned int err_type, int fatal)
199 {
200         unsigned long offset;
201         unsigned long s;
202         int len = 0;
203
204         pr_debug("rtasd: logging event\n");
205         if (buf == NULL)
206                 return;
207
208         spin_lock_irqsave(&rtasd_log_lock, s);
209
210         /* get length and increase count */
211         switch (err_type & ERR_TYPE_MASK) {
212         case ERR_TYPE_RTAS_LOG:
213                 len = log_rtas_len(buf);
214                 if (!(err_type & ERR_FLAG_BOOT))
215                         error_log_cnt++;
216                 break;
217         case ERR_TYPE_KERNEL_PANIC:
218         default:
219                 WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
220                 spin_unlock_irqrestore(&rtasd_log_lock, s);
221                 return;
222         }
223
224 #ifdef CONFIG_PPC64
225         /* Write error to NVRAM */
226         if (logging_enabled && !(err_type & ERR_FLAG_BOOT))
227                 nvram_write_error_log(buf, len, err_type, error_log_cnt);
228 #endif /* CONFIG_PPC64 */
229
230         /*
231          * rtas errors can occur during boot, and we do want to capture
232          * those somewhere, even if nvram isn't ready (why not?), and even
233          * if rtasd isn't ready. Put them into the boot log, at least.
234          */
235         if ((err_type & ERR_TYPE_MASK) == ERR_TYPE_RTAS_LOG)
236                 printk_log_rtas(buf, len);
237
238         /* Check to see if we need to or have stopped logging */
239         if (fatal || !logging_enabled) {
240                 logging_enabled = 0;
241                 WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
242                 spin_unlock_irqrestore(&rtasd_log_lock, s);
243                 return;
244         }
245
246         /* call type specific method for error */
247         switch (err_type & ERR_TYPE_MASK) {
248         case ERR_TYPE_RTAS_LOG:
249                 offset = rtas_error_log_buffer_max *
250                         ((rtas_log_start+rtas_log_size) & LOG_NUMBER_MASK);
251
252                 /* First copy over sequence number */
253                 memcpy(&rtas_log_buf[offset], (void *) &error_log_cnt, sizeof(int));
254
255                 /* Second copy over error log data */
256                 offset += sizeof(int);
257                 memcpy(&rtas_log_buf[offset], buf, len);
258
259                 if (rtas_log_size < LOG_NUMBER)
260                         rtas_log_size += 1;
261                 else
262                         rtas_log_start += 1;
263
264                 WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
265                 spin_unlock_irqrestore(&rtasd_log_lock, s);
266                 wake_up_interruptible(&rtas_log_wait);
267                 break;
268         case ERR_TYPE_KERNEL_PANIC:
269         default:
270                 WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
271                 spin_unlock_irqrestore(&rtasd_log_lock, s);
272                 return;
273         }
274 }
275
276 static void handle_rtas_event(const struct rtas_error_log *log)
277 {
278         if (!machine_is(pseries))
279                 return;
280
281         if (rtas_error_type(log) == RTAS_TYPE_PRRN)
282                 pr_info_ratelimited("Platform resource reassignment ignored.\n");
283 }
284
285 static int rtas_log_open(struct inode * inode, struct file * file)
286 {
287         return 0;
288 }
289
290 static int rtas_log_release(struct inode * inode, struct file * file)
291 {
292         return 0;
293 }
294
295 /* This will check if all events are logged, if they are then, we
296  * know that we can safely clear the events in NVRAM.
297  * Next we'll sit and wait for something else to log.
298  */
299 static ssize_t rtas_log_read(struct file * file, char __user * buf,
300                          size_t count, loff_t *ppos)
301 {
302         int error;
303         char *tmp;
304         unsigned long s;
305         unsigned long offset;
306
307         if (!buf || count < rtas_error_log_buffer_max)
308                 return -EINVAL;
309
310         count = rtas_error_log_buffer_max;
311
312         if (!access_ok(buf, count))
313                 return -EFAULT;
314
315         tmp = kmalloc(count, GFP_KERNEL);
316         if (!tmp)
317                 return -ENOMEM;
318
319         spin_lock_irqsave(&rtasd_log_lock, s);
320
321         /* if it's 0, then we know we got the last one (the one in NVRAM) */
322         while (rtas_log_size == 0) {
323                 if (file->f_flags & O_NONBLOCK) {
324                         spin_unlock_irqrestore(&rtasd_log_lock, s);
325                         error = -EAGAIN;
326                         goto out;
327                 }
328
329                 if (!logging_enabled) {
330                         spin_unlock_irqrestore(&rtasd_log_lock, s);
331                         error = -ENODATA;
332                         goto out;
333                 }
334 #ifdef CONFIG_PPC64
335                 nvram_clear_error_log();
336 #endif /* CONFIG_PPC64 */
337
338                 spin_unlock_irqrestore(&rtasd_log_lock, s);
339                 error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
340                 if (error)
341                         goto out;
342                 spin_lock_irqsave(&rtasd_log_lock, s);
343         }
344
345         offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK);
346         memcpy(tmp, &rtas_log_buf[offset], count);
347
348         rtas_log_start += 1;
349         rtas_log_size -= 1;
350         spin_unlock_irqrestore(&rtasd_log_lock, s);
351
352         error = copy_to_user(buf, tmp, count) ? -EFAULT : count;
353 out:
354         kfree(tmp);
355         return error;
356 }
357
358 static __poll_t rtas_log_poll(struct file *file, poll_table * wait)
359 {
360         poll_wait(file, &rtas_log_wait, wait);
361         if (rtas_log_size)
362                 return EPOLLIN | EPOLLRDNORM;
363         return 0;
364 }
365
366 static const struct proc_ops rtas_log_proc_ops = {
367         .proc_read      = rtas_log_read,
368         .proc_poll      = rtas_log_poll,
369         .proc_open      = rtas_log_open,
370         .proc_release   = rtas_log_release,
371         .proc_lseek     = noop_llseek,
372 };
373
374 static int enable_surveillance(int timeout)
375 {
376         int error;
377
378         error = rtas_set_indicator(SURVEILLANCE_TOKEN, 0, timeout);
379
380         if (error == 0)
381                 return 0;
382
383         if (error == -EINVAL) {
384                 printk(KERN_DEBUG "rtasd: surveillance not supported\n");
385                 return 0;
386         }
387
388         printk(KERN_ERR "rtasd: could not update surveillance\n");
389         return -1;
390 }
391
392 static void do_event_scan(void)
393 {
394         int error;
395         do {
396                 memset(logdata, 0, rtas_error_log_max);
397                 error = rtas_call(event_scan, 4, 1, NULL,
398                                   RTAS_EVENT_SCAN_ALL_EVENTS, 0,
399                                   __pa(logdata), rtas_error_log_max);
400                 if (error == -1) {
401                         printk(KERN_ERR "event-scan failed\n");
402                         break;
403                 }
404
405                 if (error == 0) {
406                         if (rtas_error_type((struct rtas_error_log *)logdata) !=
407                             RTAS_TYPE_PRRN)
408                                 pSeries_log_error(logdata, ERR_TYPE_RTAS_LOG,
409                                                   0);
410                         handle_rtas_event((struct rtas_error_log *)logdata);
411                 }
412
413         } while(error == 0);
414 }
415
416 static void rtas_event_scan(struct work_struct *w);
417 static DECLARE_DELAYED_WORK(event_scan_work, rtas_event_scan);
418
419 /*
420  * Delay should be at least one second since some machines have problems if
421  * we call event-scan too quickly.
422  */
423 static unsigned long event_scan_delay = 1*HZ;
424 static int first_pass = 1;
425
426 static void rtas_event_scan(struct work_struct *w)
427 {
428         unsigned int cpu;
429
430         do_event_scan();
431
432         get_online_cpus();
433
434         /* raw_ OK because just using CPU as starting point. */
435         cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask);
436         if (cpu >= nr_cpu_ids) {
437                 cpu = cpumask_first(cpu_online_mask);
438
439                 if (first_pass) {
440                         first_pass = 0;
441                         event_scan_delay = 30*HZ/rtas_event_scan_rate;
442
443                         if (surveillance_timeout != -1) {
444                                 pr_debug("rtasd: enabling surveillance\n");
445                                 enable_surveillance(surveillance_timeout);
446                                 pr_debug("rtasd: surveillance enabled\n");
447                         }
448                 }
449         }
450
451         schedule_delayed_work_on(cpu, &event_scan_work,
452                 __round_jiffies_relative(event_scan_delay, cpu));
453
454         put_online_cpus();
455 }
456
457 #ifdef CONFIG_PPC64
458 static void retrieve_nvram_error_log(void)
459 {
460         unsigned int err_type ;
461         int rc ;
462
463         /* See if we have any error stored in NVRAM */
464         memset(logdata, 0, rtas_error_log_max);
465         rc = nvram_read_error_log(logdata, rtas_error_log_max,
466                                   &err_type, &error_log_cnt);
467         /* We can use rtas_log_buf now */
468         logging_enabled = 1;
469         if (!rc) {
470                 if (err_type != ERR_FLAG_ALREADY_LOGGED) {
471                         pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0);
472                 }
473         }
474 }
475 #else /* CONFIG_PPC64 */
476 static void retrieve_nvram_error_log(void)
477 {
478 }
479 #endif /* CONFIG_PPC64 */
480
481 static void start_event_scan(void)
482 {
483         printk(KERN_DEBUG "RTAS daemon started\n");
484         pr_debug("rtasd: will sleep for %d milliseconds\n",
485                  (30000 / rtas_event_scan_rate));
486
487         /* Retrieve errors from nvram if any */
488         retrieve_nvram_error_log();
489
490         schedule_delayed_work_on(cpumask_first(cpu_online_mask),
491                                  &event_scan_work, event_scan_delay);
492 }
493
494 /* Cancel the rtas event scan work */
495 void rtas_cancel_event_scan(void)
496 {
497         cancel_delayed_work_sync(&event_scan_work);
498 }
499 EXPORT_SYMBOL_GPL(rtas_cancel_event_scan);
500
501 static int __init rtas_event_scan_init(void)
502 {
503         if (!machine_is(pseries) && !machine_is(chrp))
504                 return 0;
505
506         /* No RTAS */
507         event_scan = rtas_token("event-scan");
508         if (event_scan == RTAS_UNKNOWN_SERVICE) {
509                 printk(KERN_INFO "rtasd: No event-scan on system\n");
510                 return -ENODEV;
511         }
512
513         rtas_event_scan_rate = rtas_token("rtas-event-scan-rate");
514         if (rtas_event_scan_rate == RTAS_UNKNOWN_SERVICE) {
515                 printk(KERN_ERR "rtasd: no rtas-event-scan-rate on system\n");
516                 return -ENODEV;
517         }
518
519         if (!rtas_event_scan_rate) {
520                 /* Broken firmware: take a rate of zero to mean don't scan */
521                 printk(KERN_DEBUG "rtasd: scan rate is 0, not scanning\n");
522                 return 0;
523         }
524
525         /* Make room for the sequence number */
526         rtas_error_log_max = rtas_get_error_log_max();
527         rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int);
528
529         rtas_log_buf = vmalloc(array_size(LOG_NUMBER,
530                                           rtas_error_log_buffer_max));
531         if (!rtas_log_buf) {
532                 printk(KERN_ERR "rtasd: no memory\n");
533                 return -ENOMEM;
534         }
535
536         start_event_scan();
537
538         return 0;
539 }
540 arch_initcall(rtas_event_scan_init);
541
542 static int __init rtas_init(void)
543 {
544         struct proc_dir_entry *entry;
545
546         if (!machine_is(pseries) && !machine_is(chrp))
547                 return 0;
548
549         if (!rtas_log_buf)
550                 return -ENODEV;
551
552         entry = proc_create("powerpc/rtas/error_log", 0400, NULL,
553                             &rtas_log_proc_ops);
554         if (!entry)
555                 printk(KERN_ERR "Failed to create error_log proc entry\n");
556
557         return 0;
558 }
559 __initcall(rtas_init);
560
561 static int __init surveillance_setup(char *str)
562 {
563         int i;
564
565         /* We only do surveillance on pseries */
566         if (!machine_is(pseries))
567                 return 0;
568
569         if (get_option(&str,&i)) {
570                 if (i >= 0 && i <= 255)
571                         surveillance_timeout = i;
572         }
573
574         return 1;
575 }
576 __setup("surveillance=", surveillance_setup);
577
578 static int __init rtasmsgs_setup(char *str)
579 {
580         return (kstrtobool(str, &full_rtas_msgs) == 0);
581 }
582 __setup("rtasmsgs=", rtasmsgs_setup);