2 * Procedures for creating, accessing and interpreting the device tree.
4 * Paul Mackerras August 1996.
5 * Copyright (C) 1996-2005 Paul Mackerras.
7 * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
8 * {engebret|bergner}@us.ibm.com
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
19 #include <linux/kernel.h>
20 #include <linux/string.h>
21 #include <linux/init.h>
22 #include <linux/threads.h>
23 #include <linux/spinlock.h>
24 #include <linux/types.h>
25 #include <linux/pci.h>
26 #include <linux/delay.h>
27 #include <linux/initrd.h>
28 #include <linux/bitops.h>
29 #include <linux/export.h>
30 #include <linux/kexec.h>
31 #include <linux/irq.h>
32 #include <linux/memblock.h>
34 #include <linux/of_fdt.h>
35 #include <linux/libfdt.h>
36 #include <linux/cpu.h>
41 #include <asm/processor.h>
44 #include <asm/kdump.h>
48 #include <asm/pgtable.h>
49 #include <asm/powernv.h>
50 #include <asm/iommu.h>
51 #include <asm/btext.h>
52 #include <asm/sections.h>
53 #include <asm/machdep.h>
54 #include <asm/pci-bridge.h>
55 #include <asm/kexec.h>
57 #include <asm/fadump.h>
58 #include <asm/epapr_hcalls.h>
59 #include <asm/firmware.h>
60 #include <asm/dt_cpu_ftrs.h>
61 #include <asm/drmem.h>
63 #include <mm/mmu_decl.h>
66 #define DBG(fmt...) printk(KERN_ERR fmt)
72 int __initdata iommu_is_off;
73 int __initdata iommu_force_on;
74 unsigned long tce_alloc_start, tce_alloc_end;
77 static phys_addr_t first_memblock_size;
78 static int __initdata boot_cpu_count;
80 static int __init early_parse_mem(char *p)
85 memory_limit = PAGE_ALIGN(memparse(p, &p));
86 DBG("memory limit = 0x%llx\n", memory_limit);
90 early_param("mem", early_parse_mem);
93 * overlaps_initrd - check for overlap with page aligned extension of
96 static inline int overlaps_initrd(unsigned long start, unsigned long size)
98 #ifdef CONFIG_BLK_DEV_INITRD
102 return (start + size) > _ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
103 start <= _ALIGN_UP(initrd_end, PAGE_SIZE);
110 * move_device_tree - move tree to an unused area, if needed.
112 * The device tree may be allocated beyond our memory limit, or inside the
113 * crash kernel region for kdump, or within the page aligned range of initrd.
114 * If so, move it out of the way.
116 static void __init move_device_tree(void)
118 unsigned long start, size;
121 DBG("-> move_device_tree\n");
123 start = __pa(initial_boot_params);
124 size = fdt_totalsize(initial_boot_params);
126 if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
127 !memblock_is_memory(start + size - 1) ||
128 overlaps_crashkernel(start, size) || overlaps_initrd(start, size)) {
129 p = memblock_alloc_raw(size, PAGE_SIZE);
131 panic("Failed to allocate %lu bytes to move device tree\n",
133 memcpy(p, initial_boot_params, size);
134 initial_boot_params = p;
135 DBG("Moved device tree to 0x%px\n", p);
138 DBG("<- move_device_tree\n");
142 * ibm,pa-features is a per-cpu property that contains a string of
143 * attribute descriptors, each of which has a 2 byte header plus up
144 * to 254 bytes worth of processor attribute bits. First header
145 * byte specifies the number of bytes following the header.
146 * Second header byte is an "attribute-specifier" type, of which
147 * zero is the only currently-defined value.
148 * Implementation: Pass in the byte and bit offset for the feature
149 * that we are interested in. The function will return -1 if the
150 * pa-features property is missing, or a 1/0 to indicate if the feature
151 * is supported/not supported. Note that the bit numbers are
152 * big-endian to match the definition in PAPR.
154 static struct ibm_pa_feature {
155 unsigned long cpu_features; /* CPU_FTR_xxx bit */
156 unsigned long mmu_features; /* MMU_FTR_xxx bit */
157 unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */
158 unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */
159 unsigned char pabyte; /* byte number in ibm,pa-features */
160 unsigned char pabit; /* bit number (big-endian) */
161 unsigned char invert; /* if 1, pa bit set => clear feature */
162 } ibm_pa_features[] __initdata = {
163 { .pabyte = 0, .pabit = 0, .cpu_user_ftrs = PPC_FEATURE_HAS_MMU },
164 { .pabyte = 0, .pabit = 1, .cpu_user_ftrs = PPC_FEATURE_HAS_FPU },
165 { .pabyte = 0, .pabit = 3, .cpu_features = CPU_FTR_CTRL },
166 { .pabyte = 0, .pabit = 6, .cpu_features = CPU_FTR_NOEXECUTE },
167 { .pabyte = 1, .pabit = 2, .mmu_features = MMU_FTR_CI_LARGE_PAGE },
168 #ifdef CONFIG_PPC_RADIX_MMU
169 { .pabyte = 40, .pabit = 0, .mmu_features = MMU_FTR_TYPE_RADIX },
171 { .pabyte = 1, .pabit = 1, .invert = 1, .cpu_features = CPU_FTR_NODSISRALIGN },
172 { .pabyte = 5, .pabit = 0, .cpu_features = CPU_FTR_REAL_LE,
173 .cpu_user_ftrs = PPC_FEATURE_TRUE_LE },
175 * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n),
176 * we don't want to turn on TM here, so we use the *_COMP versions
177 * which are 0 if the kernel doesn't support TM.
179 { .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
180 .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
183 static void __init scan_features(unsigned long node, const unsigned char *ftrs,
184 unsigned long tablelen,
185 struct ibm_pa_feature *fp,
186 unsigned long ft_size)
188 unsigned long i, len, bit;
190 /* find descriptor with type == 0 */
196 return; /* descriptor 0 not found */
203 /* loop over bits we know about */
204 for (i = 0; i < ft_size; ++i, ++fp) {
205 if (fp->pabyte >= ftrs[0])
207 bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
208 if (bit ^ fp->invert) {
209 cur_cpu_spec->cpu_features |= fp->cpu_features;
210 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
211 cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2;
212 cur_cpu_spec->mmu_features |= fp->mmu_features;
214 cur_cpu_spec->cpu_features &= ~fp->cpu_features;
215 cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
216 cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2;
217 cur_cpu_spec->mmu_features &= ~fp->mmu_features;
222 static void __init check_cpu_pa_features(unsigned long node)
224 const unsigned char *pa_ftrs;
227 pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
231 scan_features(node, pa_ftrs, tablelen,
232 ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
235 #ifdef CONFIG_PPC_BOOK3S_64
236 static void __init init_mmu_slb_size(unsigned long node)
238 const __be32 *slb_size_ptr;
240 slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL) ? :
241 of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
244 mmu_slb_size = be32_to_cpup(slb_size_ptr);
247 #define init_mmu_slb_size(node) do { } while(0)
250 static struct feature_property {
253 unsigned long cpu_feature;
254 unsigned long cpu_user_ftr;
255 } feature_properties[] __initdata = {
256 #ifdef CONFIG_ALTIVEC
257 {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
258 {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
259 #endif /* CONFIG_ALTIVEC */
261 /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
262 {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
263 #endif /* CONFIG_VSX */
265 {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
266 {"ibm,purr", 1, CPU_FTR_PURR, 0},
267 {"ibm,spurr", 1, CPU_FTR_SPURR, 0},
268 #endif /* CONFIG_PPC64 */
271 #if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
272 static inline void identical_pvr_fixup(unsigned long node)
275 const char *model = of_get_flat_dt_prop(node, "model", NULL);
278 * Since 440GR(x)/440EP(x) processors have the same pvr,
279 * we check the node path and set bit 28 in the cur_cpu_spec
280 * pvr for EP(x) processor version. This bit is always 0 in
281 * the "real" pvr. Then we call identify_cpu again with
282 * the new logical pvr to enable FPU support.
284 if (model && strstr(model, "440EP")) {
285 pvr = cur_cpu_spec->pvr_value | 0x8;
286 identify_cpu(0, pvr);
287 DBG("Using logical pvr %x for %s\n", pvr, model);
291 #define identical_pvr_fixup(node) do { } while(0)
294 static void __init check_cpu_feature_properties(unsigned long node)
297 struct feature_property *fp = feature_properties;
300 for (i = 0; i < (int)ARRAY_SIZE(feature_properties); ++i, ++fp) {
301 prop = of_get_flat_dt_prop(node, fp->name, NULL);
302 if (prop && be32_to_cpup(prop) >= fp->min_value) {
303 cur_cpu_spec->cpu_features |= fp->cpu_feature;
304 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
309 static int __init early_init_dt_scan_cpus(unsigned long node,
310 const char *uname, int depth,
313 const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
315 const __be32 *intserv;
319 int found_thread = 0;
321 /* We are scanning "cpu" nodes only */
322 if (type == NULL || strcmp(type, "cpu") != 0)
325 /* Get physical cpuid */
326 intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
328 intserv = of_get_flat_dt_prop(node, "reg", &len);
330 nthreads = len / sizeof(int);
333 * Now see if any of these threads match our boot cpu.
334 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
336 for (i = 0; i < nthreads; i++) {
337 if (be32_to_cpu(intserv[i]) ==
338 fdt_boot_cpuid_phys(initial_boot_params)) {
339 found = boot_cpu_count;
343 /* logical cpu id is always 0 on UP kernels */
348 /* Not the boot CPU */
352 DBG("boot cpu: logical %d physical %d\n", found,
353 be32_to_cpu(intserv[found_thread]));
357 * PAPR defines "logical" PVR values for cpus that
358 * meet various levels of the architecture:
359 * 0x0f000001 Architecture version 2.04
360 * 0x0f000002 Architecture version 2.05
361 * If the cpu-version property in the cpu node contains
362 * such a value, we call identify_cpu again with the
363 * logical PVR value in order to use the cpu feature
364 * bits appropriate for the architecture level.
366 * A POWER6 partition in "POWER6 architected" mode
367 * uses the 0x0f000002 PVR value; in POWER5+ mode
368 * it uses 0x0f000001.
370 * If we're using device tree CPU feature discovery then we don't
371 * support the cpu-version property, and it's the responsibility of the
372 * firmware/hypervisor to provide the correct feature set for the
373 * architecture level via the ibm,powerpc-cpu-features binding.
375 if (!dt_cpu_ftrs_in_use()) {
376 prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
377 if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
378 identify_cpu(0, be32_to_cpup(prop));
380 check_cpu_feature_properties(node);
381 check_cpu_pa_features(node);
384 identical_pvr_fixup(node);
385 init_mmu_slb_size(node);
389 cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
390 else if (!dt_cpu_ftrs_in_use())
391 cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
392 allocate_paca(boot_cpuid);
394 set_hard_smp_processor_id(found, be32_to_cpu(intserv[found_thread]));
399 static int __init early_init_dt_scan_chosen_ppc(unsigned long node,
401 int depth, void *data)
403 const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
405 /* Use common scan routine to determine if this is the chosen node */
406 if (early_init_dt_scan_chosen(node, uname, depth, data) == 0)
410 /* check if iommu is forced on or off */
411 if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
413 if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
417 /* mem=x on the command line is the preferred mechanism */
418 lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
420 memory_limit = *lprop;
423 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
425 tce_alloc_start = *lprop;
426 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
428 tce_alloc_end = *lprop;
431 #ifdef CONFIG_KEXEC_CORE
432 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
434 crashk_res.start = *lprop;
436 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
438 crashk_res.end = crashk_res.start + *lprop - 1;
446 * Compare the range against max mem limit and update
447 * size if it cross the limit.
450 #ifdef CONFIG_SPARSEMEM
451 static bool validate_mem_limit(u64 base, u64 *size)
453 u64 max_mem = 1UL << (MAX_PHYSMEM_BITS);
457 if ((base + *size) > max_mem)
458 *size = max_mem - base;
462 static bool validate_mem_limit(u64 base, u64 *size)
468 #ifdef CONFIG_PPC_PSERIES
470 * Interpret the ibm dynamic reconfiguration memory LMBs.
471 * This contains a list of memory blocks along with NUMA affinity
474 static void __init early_init_drmem_lmb(struct drmem_lmb *lmb,
478 int is_kexec_kdump = 0, rngs;
480 base = lmb->base_addr;
481 size = drmem_lmb_size();
485 * Skip this block if the reserved bit is set in flags
486 * or if the block is not assigned to this partition.
488 if ((lmb->flags & DRCONF_MEM_RESERVED) ||
489 !(lmb->flags & DRCONF_MEM_ASSIGNED))
495 if (is_kexec_kdump) {
497 * For each memblock in ibm,dynamic-memory, a
498 * corresponding entry in linux,drconf-usable-memory
499 * property contains a counter 'p' followed by 'p'
500 * (base, size) duple. Now read the counter from
501 * linux,drconf-usable-memory property
503 rngs = dt_mem_next_cell(dt_root_size_cells, usm);
504 if (!rngs) /* there are no (base, size) duple */
509 if (is_kexec_kdump) {
510 base = dt_mem_next_cell(dt_root_addr_cells, usm);
511 size = dt_mem_next_cell(dt_root_size_cells, usm);
515 if (base >= 0x80000000ul)
517 if ((base + size) > 0x80000000ul)
518 size = 0x80000000ul - base;
521 DBG("Adding: %llx -> %llx\n", base, size);
522 if (validate_mem_limit(base, &size))
523 memblock_add(base, size);
526 #endif /* CONFIG_PPC_PSERIES */
528 static int __init early_init_dt_scan_memory_ppc(unsigned long node,
530 int depth, void *data)
532 #ifdef CONFIG_PPC_PSERIES
534 strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) {
535 walk_drmem_lmbs_early(node, early_init_drmem_lmb);
540 return early_init_dt_scan_memory(node, uname, depth, data);
544 * For a relocatable kernel, we need to get the memstart_addr first,
545 * then use it to calculate the virtual kernel start address. This has
546 * to happen at a very early stage (before machine_init). In this case,
547 * we just want to get the memstart_address and would not like to mess the
548 * memblock at this stage. So introduce a variable to skip the memblock_add()
551 #ifdef CONFIG_RELOCATABLE
552 static int add_mem_to_memblock = 1;
554 #define add_mem_to_memblock 1
557 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
561 if (base >= 0x80000000ul)
563 if ((base + size) > 0x80000000ul)
564 size = 0x80000000ul - base;
567 /* Keep track of the beginning of memory -and- the size of
568 * the very first block in the device-tree as it represents
569 * the RMA on ppc64 server
571 if (base < memstart_addr) {
572 memstart_addr = base;
573 first_memblock_size = size;
576 /* Add the chunk to the MEMBLOCK list */
577 if (add_mem_to_memblock) {
578 if (validate_mem_limit(base, &size))
579 memblock_add(base, size);
583 static void __init early_reserve_mem_dt(void)
585 unsigned long i, dt_root;
589 early_init_fdt_reserve_self();
590 early_init_fdt_scan_reserved_mem();
592 dt_root = of_get_flat_dt_root();
594 prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len);
599 DBG("Found new-style reserved-ranges\n");
601 /* Each reserved range is an (address,size) pair, 2 cells each,
602 * totalling 4 cells per range. */
603 for (i = 0; i < len / (sizeof(*prop) * 4); i++) {
606 base = of_read_number(prop + (i * 4) + 0, 2);
607 size = of_read_number(prop + (i * 4) + 2, 2);
610 DBG("reserving: %llx -> %llx\n", base, size);
611 memblock_reserve(base, size);
616 static void __init early_reserve_mem(void)
620 reserve_map = (__be64 *)(((unsigned long)initial_boot_params) +
621 fdt_off_mem_rsvmap(initial_boot_params));
623 /* Look for the new "reserved-regions" property in the DT */
624 early_reserve_mem_dt();
626 #ifdef CONFIG_BLK_DEV_INITRD
627 /* Then reserve the initrd, if any */
628 if (initrd_start && (initrd_end > initrd_start)) {
629 memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
630 _ALIGN_UP(initrd_end, PAGE_SIZE) -
631 _ALIGN_DOWN(initrd_start, PAGE_SIZE));
633 #endif /* CONFIG_BLK_DEV_INITRD */
637 * Handle the case where we might be booting from an old kexec
638 * image that setup the mem_rsvmap as pairs of 32-bit values
640 if (be64_to_cpup(reserve_map) > 0xffffffffull) {
641 u32 base_32, size_32;
642 __be32 *reserve_map_32 = (__be32 *)reserve_map;
644 DBG("Found old 32-bit reserve map\n");
647 base_32 = be32_to_cpup(reserve_map_32++);
648 size_32 = be32_to_cpup(reserve_map_32++);
651 DBG("reserving: %x -> %x\n", base_32, size_32);
652 memblock_reserve(base_32, size_32);
659 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
660 static bool tm_disabled __initdata;
662 static int __init parse_ppc_tm(char *str)
666 if (kstrtobool(str, &res))
673 early_param("ppc_tm", parse_ppc_tm);
675 static void __init tm_init(void)
678 pr_info("Disabling hardware transactional memory (HTM)\n");
679 cur_cpu_spec->cpu_user_features2 &=
680 ~(PPC_FEATURE2_HTM_NOSC | PPC_FEATURE2_HTM);
681 cur_cpu_spec->cpu_features &= ~CPU_FTR_TM;
688 static void tm_init(void) { }
689 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
691 void __init early_init_devtree(void *params)
695 DBG(" -> early_init_devtree(%px)\n", params);
697 /* Too early to BUG_ON(), do it by hand */
698 if (!early_init_dt_verify(params))
699 panic("BUG: Failed verifying flat device tree, bad version?");
701 #ifdef CONFIG_PPC_RTAS
702 /* Some machines might need RTAS info for debugging, grab it now. */
703 of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
706 #ifdef CONFIG_PPC_POWERNV
707 /* Some machines might need OPAL info for debugging, grab it now. */
708 of_scan_flat_dt(early_init_dt_scan_opal, NULL);
711 #ifdef CONFIG_FA_DUMP
712 /* scan tree to see if dump is active during last boot */
713 of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL);
716 /* Retrieve various informations from the /chosen node of the
717 * device-tree, including the platform type, initrd location and
718 * size, TCE reserve, and more ...
720 of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line);
722 /* Scan memory nodes and rebuild MEMBLOCKs */
723 of_scan_flat_dt(early_init_dt_scan_root, NULL);
724 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
728 /* make sure we've parsed cmdline for mem= before this */
730 first_memblock_size = min_t(u64, first_memblock_size, memory_limit);
731 setup_initial_memory_limit(memstart_addr, first_memblock_size);
732 /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
733 memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
734 /* If relocatable, reserve first 32k for interrupt vectors etc. */
735 if (PHYSICAL_START > MEMORY_START)
736 memblock_reserve(MEMORY_START, 0x8000);
737 reserve_kdump_trampoline();
738 #ifdef CONFIG_FA_DUMP
740 * If we fail to reserve memory for firmware-assisted dump then
741 * fallback to kexec based kdump.
743 if (fadump_reserve_mem() == 0)
745 reserve_crashkernel();
748 /* Ensure that total memory size is page-aligned. */
749 limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
750 memblock_enforce_memory_limit(limit);
752 memblock_allow_resize();
755 DBG("Phys. mem: %llx\n", (unsigned long long)memblock_phys_mem_size());
757 /* We may need to relocate the flat tree, do it now.
758 * FIXME .. and the initrd too? */
761 allocate_paca_ptrs();
763 DBG("Scanning CPUs ...\n");
767 /* Retrieve CPU related informations from the flat tree
768 * (altivec support, boot CPU ID, ...)
770 of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
771 if (boot_cpuid < 0) {
772 printk("Failed to identify boot CPU !\n");
776 #if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
777 /* We'll later wait for secondaries to check in; there are
778 * NCPUS-1 non-boot CPUs :-)
780 spinning_secondaries = boot_cpu_count - 1;
783 mmu_early_init_devtree();
785 #ifdef CONFIG_PPC_POWERNV
786 /* Scan and build the list of machine check recoverable ranges */
787 of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL);
789 epapr_paravirt_early_init();
791 /* Now try to figure out if we are running on LPAR and so on */
792 pseries_probe_fw_features();
794 #ifdef CONFIG_PPC_PS3
795 /* Identify PS3 firmware */
796 if (of_flat_dt_is_compatible(of_get_flat_dt_root(), "sony,ps3"))
797 powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE;
802 DBG(" <- early_init_devtree()\n");
805 #ifdef CONFIG_RELOCATABLE
807 * This function run before early_init_devtree, so we have to init
808 * initial_boot_params.
810 void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
812 /* Setup flat device-tree pointer */
813 initial_boot_params = params;
816 * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid
819 add_mem_to_memblock = 0;
820 of_scan_flat_dt(early_init_dt_scan_root, NULL);
821 of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
822 add_mem_to_memblock = 1;
825 *size = first_memblock_size;
831 * New implementation of the OF "find" APIs, return a refcounted
832 * object, call of_node_put() when done. The device tree and list
833 * are protected by a rw_lock.
835 * Note that property management will need some locking as well,
836 * this isn't dealt with yet.
841 * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device
842 * @np: device node of the device
844 * This looks for a property "ibm,chip-id" in the node or any
845 * of its parents and returns its content, or -1 if it cannot
848 int of_get_ibm_chip_id(struct device_node *np)
855 * Skiboot may produce memory nodes that contain more than one
856 * cell in chip-id, we only read the first one here.
858 if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) {
863 np = of_get_next_parent(np);
867 EXPORT_SYMBOL(of_get_ibm_chip_id);
870 * cpu_to_chip_id - Return the cpus chip-id
871 * @cpu: The logical cpu number.
873 * Return the value of the ibm,chip-id property corresponding to the given
874 * logical cpu number. If the chip-id can not be found, returns -1.
876 int cpu_to_chip_id(int cpu)
878 struct device_node *np;
880 np = of_get_cpu_node(cpu, NULL);
885 return of_get_ibm_chip_id(np);
887 EXPORT_SYMBOL(cpu_to_chip_id);
889 bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
893 * Early firmware scanning must use this rather than
894 * get_hard_smp_processor_id because we don't have pacas allocated
895 * until memory topology is discovered.
897 if (cpu_to_phys_id != NULL)
898 return (int)phys_id == cpu_to_phys_id[cpu];
901 return (int)phys_id == get_hard_smp_processor_id(cpu);