clk: core: replace clk_{readl,writel} with {readl,writel}
[linux-2.6-microblaze.git] / arch / mips / kernel / vmlinux.lds.S
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #include <asm/asm-offsets.h>
3 #include <asm/thread_info.h>
4
5 #define PAGE_SIZE _PAGE_SIZE
6
7 /*
8  * Put .bss..swapper_pg_dir as the first thing in .bss. This will
9  * ensure that it has .bss alignment (64K).
10  */
11 #define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir)
12
13 #include <asm-generic/vmlinux.lds.h>
14
15 #undef mips
16 #define mips mips
17 OUTPUT_ARCH(mips)
18 ENTRY(kernel_entry)
19 PHDRS {
20         text PT_LOAD FLAGS(7);  /* RWX */
21 #ifndef CONFIG_CAVIUM_OCTEON_SOC
22         note PT_NOTE FLAGS(4);  /* R__ */
23 #endif /* CAVIUM_OCTEON_SOC */
24 }
25
26 #ifdef CONFIG_32BIT
27         #ifdef CONFIG_CPU_LITTLE_ENDIAN
28                 jiffies  = jiffies_64;
29         #else
30                 jiffies  = jiffies_64 + 4;
31         #endif
32 #else
33         jiffies  = jiffies_64;
34 #endif
35
36 SECTIONS
37 {
38 #ifdef CONFIG_BOOT_ELF64
39         /* Read-only sections, merged into text segment: */
40         /* . = 0xc000000000000000; */
41
42         /* This is the value for an Origin kernel, taken from an IRIX kernel.  */
43         /* . = 0xc00000000001c000; */
44
45         /* Set the vaddr for the text segment to a value
46          *   >= 0xa800 0000 0001 9000 if no symmon is going to configured
47          *   >= 0xa800 0000 0030 0000 otherwise
48          */
49
50         /* . = 0xa800000000300000; */
51         . = 0xffffffff80300000;
52 #endif
53         . = VMLINUX_LOAD_ADDRESS;
54         /* read-only */
55         _text = .;      /* Text and read-only data */
56         .text : {
57                 TEXT_TEXT
58                 SCHED_TEXT
59                 CPUIDLE_TEXT
60                 LOCK_TEXT
61                 KPROBES_TEXT
62                 IRQENTRY_TEXT
63                 SOFTIRQENTRY_TEXT
64                 *(.text.*)
65                 *(.fixup)
66                 *(.gnu.warning)
67         } :text = 0
68         _etext = .;     /* End of text section */
69
70         EXCEPTION_TABLE(16)
71
72         /* Exception table for data bus errors */
73         __dbe_table : {
74                 __start___dbe_table = .;
75                 KEEP(*(__dbe_table))
76                 __stop___dbe_table = .;
77         }
78
79 #ifdef CONFIG_CAVIUM_OCTEON_SOC
80 #define NOTES_HEADER
81 #else /* CONFIG_CAVIUM_OCTEON_SOC */
82 #define NOTES_HEADER :note
83 #endif /* CONFIG_CAVIUM_OCTEON_SOC */
84         NOTES :text NOTES_HEADER
85         .dummy : { *(.dummy) } :text
86
87         _sdata = .;                     /* Start of data section */
88         RODATA
89
90         /* writeable */
91         .data : {       /* Data */
92                 . = . + DATAOFFSET;             /* for CONFIG_MAPPED_KERNEL */
93
94                 INIT_TASK_DATA(THREAD_SIZE)
95                 NOSAVE_DATA
96                 CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
97                 READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
98                 DATA_DATA
99                 CONSTRUCTORS
100         }
101         BUG_TABLE
102         _gp = . + 0x8000;
103         .lit8 : {
104                 *(.lit8)
105         }
106         .lit4 : {
107                 *(.lit4)
108         }
109         /* We want the small data sections together, so single-instruction offsets
110            can access them all, and initialized data all before uninitialized, so
111            we can shorten the on-disk segment size.  */
112         .sdata : {
113                 *(.sdata)
114         }
115         _edata =  .;                    /* End of data section */
116
117         /* will be freed after init */
118         . = ALIGN(PAGE_SIZE);           /* Init code and data */
119         __init_begin = .;
120         INIT_TEXT_SECTION(PAGE_SIZE)
121         INIT_DATA_SECTION(16)
122
123         . = ALIGN(4);
124         .mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
125                 __mips_machines_start = .;
126                 KEEP(*(.mips.machines.init))
127                 __mips_machines_end = .;
128         }
129
130         /* .exit.text is discarded at runtime, not link time, to deal with
131          * references from .rodata
132          */
133         .exit.text : {
134                 EXIT_TEXT
135         }
136         .exit.data : {
137                 EXIT_DATA
138         }
139 #ifdef CONFIG_SMP
140         PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
141 #endif
142
143 #ifdef CONFIG_RELOCATABLE
144         . = ALIGN(4);
145
146         .data.reloc : {
147                 _relocation_start = .;
148                 /*
149                  * Space for relocation table
150                  * This needs to be filled so that the
151                  * relocs tool can overwrite the content.
152                  * An invalid value is left at the start of the
153                  * section to abort relocation if the table
154                  * has not been filled in.
155                  */
156                 LONG(0xFFFFFFFF);
157                 FILL(0);
158                 . += CONFIG_RELOCATION_TABLE_SIZE - 4;
159                 _relocation_end = .;
160         }
161 #endif
162
163 #ifdef CONFIG_MIPS_RAW_APPENDED_DTB
164         __appended_dtb = .;
165         /* leave space for appended DTB */
166         . += 0x100000;
167 #elif defined(CONFIG_MIPS_ELF_APPENDED_DTB)
168         .appended_dtb : AT(ADDR(.appended_dtb) - LOAD_OFFSET) {
169                 *(.appended_dtb)
170                 KEEP(*(.appended_dtb))
171         }
172 #endif
173         /*
174          * Align to 64K in attempt to eliminate holes before the
175          * .bss..swapper_pg_dir section at the start of .bss.  This
176          * also satisfies PAGE_SIZE alignment as the largest page size
177          * allowed is 64K.
178          */
179         . = ALIGN(0x10000);
180         __init_end = .;
181         /* freed after init ends here */
182
183         /*
184          * Force .bss to 64K alignment so that .bss..swapper_pg_dir
185          * gets that alignment.  .sbss should be empty, so there will be
186          * no holes after __init_end. */
187         BSS_SECTION(0, 0x10000, 8)
188
189         _end = . ;
190
191         /* These mark the ABI of the kernel for debuggers.  */
192         .mdebug.abi32 : {
193                 KEEP(*(.mdebug.abi32))
194         }
195         .mdebug.abi64 : {
196                 KEEP(*(.mdebug.abi64))
197         }
198
199         /* This is the MIPS specific mdebug section.  */
200         .mdebug : {
201                 *(.mdebug)
202         }
203
204         STABS_DEBUG
205         DWARF_DEBUG
206
207         /* These must appear regardless of  .  */
208         .gptab.sdata : {
209                 *(.gptab.data)
210                 *(.gptab.sdata)
211         }
212         .gptab.sbss : {
213                 *(.gptab.bss)
214                 *(.gptab.sbss)
215         }
216
217         /* Sections to be discarded */
218         DISCARDS
219         /DISCARD/ : {
220                 /* ABI crap starts here */
221                 *(.MIPS.abiflags)
222                 *(.MIPS.options)
223                 *(.options)
224                 *(.pdr)
225                 *(.reginfo)
226                 *(.eh_frame)
227         }
228 }