Merge tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda...
[linux-2.6-microblaze.git] / arch / mips / kernel / sync-r4k.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Count register synchronisation.
4  *
5  * All CPUs will have their count registers synchronised to the CPU0 next time
6  * value. This can cause a small timewarp for CPU0. All other CPU's should
7  * not have done anything significant (but they may have had interrupts
8  * enabled briefly - prom_smp_finish() should not be responsible for enabling
9  * interrupts...)
10  */
11
12 #include <linux/kernel.h>
13 #include <linux/irqflags.h>
14 #include <linux/cpumask.h>
15
16 #include <asm/r4k-timer.h>
17 #include <linux/atomic.h>
18 #include <asm/barrier.h>
19 #include <asm/mipsregs.h>
20
21 static unsigned int initcount = 0;
22 static atomic_t count_count_start = ATOMIC_INIT(0);
23 static atomic_t count_count_stop = ATOMIC_INIT(0);
24
25 #define COUNTON 100
26 #define NR_LOOPS 3
27
28 void synchronise_count_master(int cpu)
29 {
30         int i;
31         unsigned long flags;
32
33         pr_info("Synchronize counters for CPU %u: ", cpu);
34
35         local_irq_save(flags);
36
37         /*
38          * We loop a few times to get a primed instruction cache,
39          * then the last pass is more or less synchronised and
40          * the master and slaves each set their cycle counters to a known
41          * value all at once. This reduces the chance of having random offsets
42          * between the processors, and guarantees that the maximum
43          * delay between the cycle counters is never bigger than
44          * the latency of information-passing (cachelines) between
45          * two CPUs.
46          */
47
48         for (i = 0; i < NR_LOOPS; i++) {
49                 /* slaves loop on '!= 2' */
50                 while (atomic_read(&count_count_start) != 1)
51                         mb();
52                 atomic_set(&count_count_stop, 0);
53                 smp_wmb();
54
55                 /* Let the slave writes its count register */
56                 atomic_inc(&count_count_start);
57
58                 /* Count will be initialised to current timer */
59                 if (i == 1)
60                         initcount = read_c0_count();
61
62                 /*
63                  * Everyone initialises count in the last loop:
64                  */
65                 if (i == NR_LOOPS-1)
66                         write_c0_count(initcount);
67
68                 /*
69                  * Wait for slave to leave the synchronization point:
70                  */
71                 while (atomic_read(&count_count_stop) != 1)
72                         mb();
73                 atomic_set(&count_count_start, 0);
74                 smp_wmb();
75                 atomic_inc(&count_count_stop);
76         }
77         /* Arrange for an interrupt in a short while */
78         write_c0_compare(read_c0_count() + COUNTON);
79
80         local_irq_restore(flags);
81
82         /*
83          * i386 code reported the skew here, but the
84          * count registers were almost certainly out of sync
85          * so no point in alarming people
86          */
87         pr_cont("done.\n");
88 }
89
90 void synchronise_count_slave(int cpu)
91 {
92         int i;
93         unsigned long flags;
94
95         local_irq_save(flags);
96
97         /*
98          * Not every cpu is online at the time this gets called,
99          * so we first wait for the master to say everyone is ready
100          */
101
102         for (i = 0; i < NR_LOOPS; i++) {
103                 atomic_inc(&count_count_start);
104                 while (atomic_read(&count_count_start) != 2)
105                         mb();
106
107                 /*
108                  * Everyone initialises count in the last loop:
109                  */
110                 if (i == NR_LOOPS-1)
111                         write_c0_count(initcount);
112
113                 atomic_inc(&count_count_stop);
114                 while (atomic_read(&count_count_stop) != 2)
115                         mb();
116         }
117         /* Arrange for an interrupt in a short while */
118         write_c0_compare(read_c0_count() + COUNTON);
119
120         local_irq_restore(flags);
121 }
122 #undef NR_LOOPS