arch/mips/kernel/idle.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * MIPS idle loop and WAIT instruction support.
   4  *
   5  * Copyright (C) xxxx  the Anonymous
   6  * Copyright (C) 1994 - 2006 Ralf Baechle
   7  * Copyright (C) 2003, 2004  Maciej W. Rozycki
   8  * Copyright (C) 2001, 2004, 2011, 2012  MIPS Technologies, Inc.
   9  */
  10 #include <linux/cpu.h>
  11 #include <linux/export.h>
  12 #include <linux/init.h>
  13 #include <linux/irqflags.h>
  14 #include <linux/printk.h>
  15 #include <linux/sched.h>
  16 #include <asm/cpu.h>
  17 #include <asm/cpu-info.h>
  18 #include <asm/cpu-type.h>
  19 #include <asm/idle.h>
  20 #include <asm/mipsregs.h>
  21
  22 /*
  23  * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
  24  * the implementation of the "wait" feature differs between CPU families. This
  25  * points to the function that implements CPU specific wait.
  26  * The wait instruction stops the pipeline and reduces the power consumption of
  27  * the CPU very much.
  28  */
  29 void (*cpu_wait)(void);
  30 EXPORT_SYMBOL(cpu_wait);
  31
  32 static void __cpuidle r3081_wait(void)
  33 {
  34         unsigned long cfg = read_c0_conf();
  35         write_c0_conf(cfg | R30XX_CONF_HALT);
  36 }
  37
  38 void __cpuidle r4k_wait(void)
  39 {
  40         raw_local_irq_enable();
  41         __r4k_wait();
  42         raw_local_irq_disable();
  43 }
  44
  45 /*
  46  * This variant is preferable as it allows testing need_resched and going to
  47  * sleep depending on the outcome atomically.  Unfortunately the "It is
  48  * implementation-dependent whether the pipeline restarts when a non-enabled
  49  * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
  50  * using this version a gamble.
  51  */
  52 void __cpuidle r4k_wait_irqoff(void)
  53 {
  54         if (!need_resched())
  55                 __asm__(
  56                 "       .set    push            \n"
  57                 "       .set    arch=r4000      \n"
  58                 "       wait                    \n"
  59                 "       .set    pop             \n");
  60 }
  61
  62 /*
  63  * The RM7000 variant has to handle erratum 38.  The workaround is to not
  64  * have any pending stores when the WAIT instruction is executed.
  65  */
  66 static void __cpuidle rm7k_wait_irqoff(void)
  67 {
  68         if (!need_resched())
  69                 __asm__(
  70                 "       .set    push                                    \n"
  71                 "       .set    arch=r4000                              \n"
  72                 "       .set    noat                                    \n"
  73                 "       mfc0    $1, $12                                 \n"
  74                 "       sync                                            \n"
  75                 "       mtc0    $1, $12         # stalls until W stage  \n"
  76                 "       wait                                            \n"
  77                 "       mtc0    $1, $12         # stalls until W stage  \n"
  78                 "       .set    pop                                     \n");
  79 }
  80
  81 /*
  82  * Au1 'wait' is only useful when the 32kHz counter is used as timer,
  83  * since coreclock (and the cp0 counter) stops upon executing it. Only an
  84  * interrupt can wake it, so they must be enabled before entering idle modes.
  85  */
  86 static void __cpuidle au1k_wait(void)
  87 {
  88         unsigned long c0status = read_c0_status() | 1;  /* irqs on */
  89
  90         __asm__(
  91         "       .set    push                    \n"
  92         "       .set    arch=r4000              \n"
  93         "       cache   0x14, 0(%0)             \n"
  94         "       cache   0x14, 32(%0)            \n"
  95         "       sync                            \n"
  96         "       mtc0    %1, $12                 \n" /* wr c0status */
  97         "       wait                            \n"
  98         "       nop                             \n"
  99         "       nop                             \n"
 100         "       nop                             \n"
 101         "       nop                             \n"
 102         "       .set    pop                     \n"
 103         : : "r" (au1k_wait), "r" (c0status));
 104
 105         raw_local_irq_disable();
 106 }
 107
 108 static int __initdata nowait;
 109
 110 static int __init wait_disable(char *s)
 111 {
 112         nowait = 1;
 113
 114         return 1;
 115 }
 116
 117 __setup("nowait", wait_disable);
 118
 119 void __init check_wait(void)
 120 {
 121         struct cpuinfo_mips *c = &current_cpu_data;
 122
 123         if (nowait) {
 124                 printk("Wait instruction disabled.\n");
 125                 return;
 126         }
 127
 128         /*
 129          * MIPSr6 specifies that masked interrupts should unblock an executing
 130          * wait instruction, and thus that it is safe for us to use
 131          * r4k_wait_irqoff. Yippee!
 132          */
 133         if (cpu_has_mips_r6) {
 134                 cpu_wait = r4k_wait_irqoff;
 135                 return;
 136         }
 137
 138         switch (current_cpu_type()) {
 139         case CPU_R3081:
 140         case CPU_R3081E:
 141                 cpu_wait = r3081_wait;
 142                 break;
 143         case CPU_R4200:
 144 /*      case CPU_R4300: */
 145         case CPU_R4600:
 146         case CPU_R4640:
 147         case CPU_R4650:
 148         case CPU_R4700:
 149         case CPU_R5000:
 150         case CPU_R5500:
 151         case CPU_NEVADA:
 152         case CPU_4KC:
 153         case CPU_4KEC:
 154         case CPU_4KSC:
 155         case CPU_5KC:
 156         case CPU_5KE:
 157         case CPU_25KF:
 158         case CPU_PR4450:
 159         case CPU_BMIPS3300:
 160         case CPU_BMIPS4350:
 161         case CPU_BMIPS4380:
 162         case CPU_CAVIUM_OCTEON:
 163         case CPU_CAVIUM_OCTEON_PLUS:
 164         case CPU_CAVIUM_OCTEON2:
 165         case CPU_CAVIUM_OCTEON3:
 166         case CPU_XBURST:
 167         case CPU_LOONGSON32:
 168                 cpu_wait = r4k_wait;
 169                 break;
 170         case CPU_LOONGSON64:
 171                 if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >=
 172                                 (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) ||
 173                                 (c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
 174                         cpu_wait = r4k_wait;
 175                 break;
 176
 177         case CPU_BMIPS5000:
 178                 cpu_wait = r4k_wait_irqoff;
 179                 break;
 180         case CPU_RM7000:
 181                 cpu_wait = rm7k_wait_irqoff;
 182                 break;
 183
 184         case CPU_PROAPTIV:
 185         case CPU_P5600:
 186                 /*
 187                  * Incoming Fast Debug Channel (FDC) data during a wait
 188                  * instruction causes the wait never to resume, even if an
 189                  * interrupt is received. Avoid using wait at all if FDC data is
 190                  * likely to be received.
 191                  */
 192                 if (IS_ENABLED(CONFIG_MIPS_EJTAG_FDC_TTY))
 193                         break;
 194                 fallthrough;
 195         case CPU_M14KC:
 196         case CPU_M14KEC:
 197         case CPU_24K:
 198         case CPU_34K:
 199         case CPU_1004K:
 200         case CPU_1074K:
 201         case CPU_INTERAPTIV:
 202         case CPU_M5150:
 203         case CPU_QEMU_GENERIC:
 204                 cpu_wait = r4k_wait;
 205                 if (read_c0_config7() & MIPS_CONF7_WII)
 206                         cpu_wait = r4k_wait_irqoff;
 207                 break;
 208
 209         case CPU_74K:
 210                 cpu_wait = r4k_wait;
 211                 if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
 212                         cpu_wait = r4k_wait_irqoff;
 213                 break;
 214
 215         case CPU_TX49XX:
 216                 cpu_wait = r4k_wait_irqoff;
 217                 break;
 218         case CPU_ALCHEMY:
 219                 cpu_wait = au1k_wait;
 220                 break;
 221         case CPU_20KC:
 222                 /*
 223                  * WAIT on Rev1.0 has E1, E2, E3 and E16.
 224                  * WAIT on Rev2.0 and Rev3.0 has E16.
 225                  * Rev3.1 WAIT is nop, why bother
 226                  */
 227                 if ((c->processor_id & 0xff) <= 0x64)
 228                         break;
 229
 230                 /*
 231                  * Another rev is incrementing c0_count at a reduced clock
 232                  * rate while in WAIT mode.  So we basically have the choice
 233                  * between using the cp0 timer as clocksource or avoiding
 234                  * the WAIT instruction.  Until more details are known,
 235                  * disable the use of WAIT for 20Kc entirely.
 236                    cpu_wait = r4k_wait;
 237                  */
 238                 break;
 239         default:
 240                 break;
 241         }
 242 }
 243
 244 __cpuidle void arch_cpu_idle(void)
 245 {
 246         if (cpu_wait)
 247                 cpu_wait();
 248 }
 249
 250 #ifdef CONFIG_CPU_IDLE
 251
 252 __cpuidle int mips_cpuidle_wait_enter(struct cpuidle_device *dev,
 253                                       struct cpuidle_driver *drv, int index)
 254 {
 255         arch_cpu_idle();
 256         return index;
 257 }
 258
 259 #endif