2 * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
3 * Copyright (C) 2006 Atmark Techno, Inc.
5 * This file is subject to the terms and conditions of the GNU General Public
6 * License. See the file "COPYING" in the main directory of this archive
10 #include <linux/dma-map-ops.h>
11 #include <linux/memblock.h>
12 #include <linux/init.h>
13 #include <linux/kernel.h>
14 #include <linux/mm.h> /* mem_init */
15 #include <linux/initrd.h>
16 #include <linux/pagemap.h>
17 #include <linux/pfn.h>
18 #include <linux/slab.h>
19 #include <linux/swap.h>
20 #include <linux/export.h>
23 #include <asm/mmu_context.h>
24 #include <asm/pgalloc.h>
25 #include <asm/sections.h>
27 #include <asm/fixmap.h>
29 /* Use for MMU and noMMU because of PCI generic code */
33 unsigned int __page_offset;
34 EXPORT_SYMBOL(__page_offset);
35 #endif /* CONFIG_MMU */
40 * Initialize the bootmem system and give it all the memory we
43 unsigned long memory_start;
44 EXPORT_SYMBOL(memory_start);
45 unsigned long memory_size;
46 EXPORT_SYMBOL(memory_size);
47 unsigned long lowmem_size;
49 EXPORT_SYMBOL(min_low_pfn);
50 EXPORT_SYMBOL(max_low_pfn);
53 static void __init highmem_init(void)
55 pr_debug("%x\n", (u32)PKMAP_BASE);
56 map_page(PKMAP_BASE, 0, 0); /* XXX gross */
57 pkmap_page_table = virt_to_kpte(PKMAP_BASE);
60 static void highmem_setup(void)
64 for (pfn = max_low_pfn; pfn < max_pfn; ++pfn) {
65 struct page *page = pfn_to_page(pfn);
67 /* FIXME not sure about */
68 if (!memblock_is_reserved(pfn << PAGE_SHIFT))
69 free_highmem_page(page);
72 #endif /* CONFIG_HIGHMEM */
75 * paging_init() sets up the page tables - in fact we've already done this.
77 static void __init paging_init(void)
79 unsigned long zones_size[MAX_NR_ZONES];
84 for (idx = 0; idx < __end_of_fixed_addresses; idx++)
88 /* Clean every zones */
89 memset(zones_size, 0, sizeof(zones_size));
94 zones_size[ZONE_DMA] = max_low_pfn;
95 zones_size[ZONE_HIGHMEM] = max_pfn;
97 zones_size[ZONE_DMA] = max_pfn;
100 /* We don't have holes in memory map */
101 free_area_init(zones_size);
104 void __init setup_memory(void)
107 u32 kernel_align_start, kernel_align_size;
108 phys_addr_t start, end;
111 /* Find main memory where is the kernel */
112 for_each_mem_range(i, &start, &end) {
113 memory_start = start;
114 lowmem_size = end - start;
115 if ((memory_start <= (u32)_text) &&
116 ((u32)_text <= (memory_start + lowmem_size - 1))) {
117 memory_size = lowmem_size;
118 PAGE_OFFSET = memory_start;
119 pr_info("%s: Main mem: 0x%x, size 0x%08x\n",
120 __func__, (u32) memory_start,
126 if (!memory_start || !memory_size) {
127 panic("%s: Missing memory setting 0x%08x, size=0x%08x\n",
128 __func__, (u32) memory_start, (u32) memory_size);
131 /* reservation of region where is the kernel */
132 kernel_align_start = PAGE_DOWN((u32)_text);
133 /* ALIGN can be remove because _end in vmlinux.lds.S is align */
134 kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
135 pr_info("%s: kernel addr:0x%08x-0x%08x size=0x%08x\n",
136 __func__, kernel_align_start, kernel_align_start
137 + kernel_align_size, kernel_align_size);
138 memblock_reserve(kernel_align_start, kernel_align_size);
142 * start: base phys address of kernel - page align
143 * end: base phys address of kernel - page align
145 * min_low_pfn - the first page (mm/bootmem.c - node_boot_start)
147 * max_mapnr - the first unused page (mm/bootmem.c - node_low_pfn)
150 /* memory start is from the kernel end (aligned) to higher addr */
151 min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */
152 /* RAM is assumed contiguous */
153 max_mapnr = memory_size >> PAGE_SHIFT;
154 max_low_pfn = ((u64)memory_start + (u64)lowmem_size) >> PAGE_SHIFT;
155 max_pfn = ((u64)memory_start + (u64)memory_size) >> PAGE_SHIFT;
157 pr_info("%s: max_mapnr: %#lx\n", __func__, max_mapnr);
158 pr_info("%s: min_low_pfn: %#lx\n", __func__, min_low_pfn);
159 pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
160 pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn);
165 void __init mem_init(void)
167 high_memory = (void *)__va(memory_start + lowmem_size - 1);
169 /* this will put all memory onto the freelists */
171 #ifdef CONFIG_HIGHMEM
175 mem_init_print_info(NULL);
180 int page_is_ram(unsigned long pfn)
182 return __range_ok(pfn, 0);
185 int page_is_ram(unsigned long pfn)
187 return pfn < max_low_pfn;
191 * Check for command-line options that affect what MMU_init will do.
193 static void mm_cmdline_setup(void)
195 unsigned long maxmem = 0;
198 /* Look for mem= option on command line */
199 p = strstr(cmd_line, "mem=");
202 maxmem = memparse(p, &p);
203 if (maxmem && memory_size > maxmem) {
204 memory_size = maxmem;
205 memblock.memory.regions[0].size = memory_size;
211 * MMU_init_hw does the chip-specific initialization of the MMU hardware.
213 static void __init mmu_init_hw(void)
216 * The Zone Protection Register (ZPR) defines how protection will
217 * be applied to every page which is a member of a given zone. At
218 * present, we utilize only two of the zones.
219 * The zone index bits (of ZSEL) in the PTE are used for software
220 * indicators, except the LSB. For user access, zone 1 is used,
221 * for kernel access, zone 0 is used. We set all but zone 1
222 * to zero, allowing only kernel access as indicated in the PTE.
223 * For zone 1, we set a 01 binary (a value of 10 will not work)
224 * to allow user access as indicated in the PTE. This also allows
225 * kernel access as indicated in the PTE.
227 __asm__ __volatile__ ("ori r11, r0, 0x10000000;" \
233 * MMU_init sets up the basic memory mappings for the kernel,
234 * including both RAM and possibly some I/O regions,
235 * and sets up the page tables and the MMU hardware ready to go.
238 /* called from head.S */
239 asmlinkage void __init mmu_init(void)
241 unsigned int kstart, ksize;
243 if (!memblock.reserved.cnt) {
244 pr_emerg("Error memory count\n");
245 machine_restart(NULL);
248 if ((u32) memblock.memory.regions[0].size < 0x400000) {
249 pr_emerg("Memory must be greater than 4MB\n");
250 machine_restart(NULL);
253 if ((u32) memblock.memory.regions[0].size < kernel_tlb) {
254 pr_emerg("Kernel size is greater than memory node\n");
255 machine_restart(NULL);
258 /* Find main memory where the kernel is */
259 memory_start = (u32) memblock.memory.regions[0].base;
260 lowmem_size = memory_size = (u32) memblock.memory.regions[0].size;
262 if (lowmem_size > CONFIG_LOWMEM_SIZE) {
263 lowmem_size = CONFIG_LOWMEM_SIZE;
264 #ifndef CONFIG_HIGHMEM
265 memory_size = lowmem_size;
269 mm_cmdline_setup(); /* FIXME parse args from command line - not used */
272 * Map out the kernel text/data/bss from the available physical
275 kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
277 ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
278 memblock_reserve(kstart, ksize);
280 #if defined(CONFIG_BLK_DEV_INITRD)
281 /* Remove the init RAM disk from the available memory. */
284 size = initrd_end - initrd_start;
285 memblock_reserve(__virt_to_phys(initrd_start), size);
287 #endif /* CONFIG_BLK_DEV_INITRD */
289 /* Initialize the MMU hardware */
292 /* Map in all of RAM starting at CONFIG_KERNEL_START */
295 /* Extend vmalloc and ioremap area as big as possible */
296 #ifdef CONFIG_HIGHMEM
297 ioremap_base = ioremap_bot = PKMAP_BASE;
299 ioremap_base = ioremap_bot = FIXADDR_START;
302 /* Initialize the context management stuff */
305 /* Shortly after that, the entire linear mapping will be available */
306 /* This will also cause that unflatten device tree will be allocated
307 * inside 768MB limit */
308 memblock_set_current_limit(memory_start + lowmem_size - 1);
312 /* CMA initialization */
313 dma_contiguous_reserve(memory_start + lowmem_size - 1);
316 /* This is only called until mem_init is done. */
317 void __init *early_get_page(void)
320 * Mem start + kernel_tlb -> here is limit
321 * because of mem mapping from head.S
323 return memblock_alloc_try_nid_raw(PAGE_SIZE, PAGE_SIZE,
324 MEMBLOCK_LOW_LIMIT, memory_start + kernel_tlb,
328 #endif /* CONFIG_MMU */
330 void * __ref zalloc_maybe_bootmem(size_t size, gfp_t mask)
335 p = kzalloc(size, mask);
337 p = memblock_alloc(size, SMP_CACHE_BYTES);
339 panic("%s: Failed to allocate %zu bytes\n",