dt-bindings: soc: bcm: use absolute path to other schema
[linux-2.6-microblaze.git] / arch / arm64 / include / asm / memory.h
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Based on arch/arm/include/asm/memory.h
4  *
5  * Copyright (C) 2000-2002 Russell King
6  * Copyright (C) 2012 ARM Ltd.
7  *
8  * Note: this file should not be included by non-asm/.h files
9  */
10 #ifndef __ASM_MEMORY_H
11 #define __ASM_MEMORY_H
12
13 #include <linux/const.h>
14 #include <linux/sizes.h>
15 #include <asm/page-def.h>
16
17 /*
18  * Size of the PCI I/O space. This must remain a power of two so that
19  * IO_SPACE_LIMIT acts as a mask for the low bits of I/O addresses.
20  */
21 #define PCI_IO_SIZE             SZ_16M
22
23 /*
24  * VMEMMAP_SIZE - allows the whole linear region to be covered by
25  *                a struct page array
26  *
27  * If we are configured with a 52-bit kernel VA then our VMEMMAP_SIZE
28  * needs to cover the memory region from the beginning of the 52-bit
29  * PAGE_OFFSET all the way to PAGE_END for 48-bit. This allows us to
30  * keep a constant PAGE_OFFSET and "fallback" to using the higher end
31  * of the VMEMMAP where 52-bit support is not available in hardware.
32  */
33 #define VMEMMAP_SHIFT   (PAGE_SHIFT - STRUCT_PAGE_MAX_SHIFT)
34 #define VMEMMAP_SIZE    ((_PAGE_END(VA_BITS_MIN) - PAGE_OFFSET) >> VMEMMAP_SHIFT)
35
36 /*
37  * PAGE_OFFSET - the virtual address of the start of the linear map, at the
38  *               start of the TTBR1 address space.
39  * PAGE_END - the end of the linear map, where all other kernel mappings begin.
40  * KIMAGE_VADDR - the virtual address of the start of the kernel image.
41  * VA_BITS - the maximum number of bits for virtual addresses.
42  */
43 #define VA_BITS                 (CONFIG_ARM64_VA_BITS)
44 #define _PAGE_OFFSET(va)        (-(UL(1) << (va)))
45 #define PAGE_OFFSET             (_PAGE_OFFSET(VA_BITS))
46 #define KIMAGE_VADDR            (MODULES_END)
47 #define MODULES_END             (MODULES_VADDR + MODULES_VSIZE)
48 #define MODULES_VADDR           (_PAGE_END(VA_BITS_MIN))
49 #define MODULES_VSIZE           (SZ_128M)
50 #define VMEMMAP_START           (-(UL(1) << (VA_BITS - VMEMMAP_SHIFT)))
51 #define VMEMMAP_END             (VMEMMAP_START + VMEMMAP_SIZE)
52 #define PCI_IO_END              (VMEMMAP_START - SZ_8M)
53 #define PCI_IO_START            (PCI_IO_END - PCI_IO_SIZE)
54 #define FIXADDR_TOP             (VMEMMAP_START - SZ_32M)
55
56 #if VA_BITS > 48
57 #define VA_BITS_MIN             (48)
58 #else
59 #define VA_BITS_MIN             (VA_BITS)
60 #endif
61
62 #define _PAGE_END(va)           (-(UL(1) << ((va) - 1)))
63
64 #define KERNEL_START            _text
65 #define KERNEL_END              _end
66
67 /*
68  * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual
69  * address space for the shadow region respectively. They can bloat the stack
70  * significantly, so double the (minimum) stack size when they are in use.
71  */
72 #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
73 #define KASAN_SHADOW_OFFSET     _AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
74 #define KASAN_SHADOW_END        ((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \
75                                         + KASAN_SHADOW_OFFSET)
76 #define PAGE_END                (KASAN_SHADOW_END - (1UL << (vabits_actual - KASAN_SHADOW_SCALE_SHIFT)))
77 #define KASAN_THREAD_SHIFT      1
78 #else
79 #define KASAN_THREAD_SHIFT      0
80 #define PAGE_END                (_PAGE_END(VA_BITS_MIN))
81 #endif /* CONFIG_KASAN */
82
83 #define MIN_THREAD_SHIFT        (14 + KASAN_THREAD_SHIFT)
84
85 /*
86  * VMAP'd stacks are allocated at page granularity, so we must ensure that such
87  * stacks are a multiple of page size.
88  */
89 #if defined(CONFIG_VMAP_STACK) && (MIN_THREAD_SHIFT < PAGE_SHIFT)
90 #define THREAD_SHIFT            PAGE_SHIFT
91 #else
92 #define THREAD_SHIFT            MIN_THREAD_SHIFT
93 #endif
94
95 #if THREAD_SHIFT >= PAGE_SHIFT
96 #define THREAD_SIZE_ORDER       (THREAD_SHIFT - PAGE_SHIFT)
97 #endif
98
99 #define THREAD_SIZE             (UL(1) << THREAD_SHIFT)
100
101 /*
102  * By aligning VMAP'd stacks to 2 * THREAD_SIZE, we can detect overflow by
103  * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry
104  * assembly.
105  */
106 #ifdef CONFIG_VMAP_STACK
107 #define THREAD_ALIGN            (2 * THREAD_SIZE)
108 #else
109 #define THREAD_ALIGN            THREAD_SIZE
110 #endif
111
112 #define IRQ_STACK_SIZE          THREAD_SIZE
113
114 #define OVERFLOW_STACK_SIZE     SZ_4K
115
116 /*
117  * Alignment of kernel segments (e.g. .text, .data).
118  *
119  *  4 KB granule:  16 level 3 entries, with contiguous bit
120  * 16 KB granule:   4 level 3 entries, without contiguous bit
121  * 64 KB granule:   1 level 3 entry
122  */
123 #define SEGMENT_ALIGN           SZ_64K
124
125 /*
126  * Memory types available.
127  *
128  * IMPORTANT: MT_NORMAL must be index 0 since vm_get_page_prot() may 'or' in
129  *            the MT_NORMAL_TAGGED memory type for PROT_MTE mappings. Note
130  *            that protection_map[] only contains MT_NORMAL attributes.
131  */
132 #define MT_NORMAL               0
133 #define MT_NORMAL_TAGGED        1
134 #define MT_NORMAL_NC            2
135 #define MT_DEVICE_nGnRnE        3
136 #define MT_DEVICE_nGnRE         4
137
138 /*
139  * Memory types for Stage-2 translation
140  */
141 #define MT_S2_NORMAL            0xf
142 #define MT_S2_DEVICE_nGnRE      0x1
143
144 /*
145  * Memory types for Stage-2 translation when ID_AA64MMFR2_EL1.FWB is 0001
146  * Stage-2 enforces Normal-WB and Device-nGnRE
147  */
148 #define MT_S2_FWB_NORMAL        6
149 #define MT_S2_FWB_DEVICE_nGnRE  1
150
151 #ifdef CONFIG_ARM64_4K_PAGES
152 #define IOREMAP_MAX_ORDER       (PUD_SHIFT)
153 #else
154 #define IOREMAP_MAX_ORDER       (PMD_SHIFT)
155 #endif
156
157 /*
158  *  Open-coded (swapper_pg_dir - reserved_pg_dir) as this cannot be calculated
159  *  until link time.
160  */
161 #define RESERVED_SWAPPER_OFFSET (PAGE_SIZE)
162
163 /*
164  *  Open-coded (swapper_pg_dir - tramp_pg_dir) as this cannot be calculated
165  *  until link time.
166  */
167 #define TRAMP_SWAPPER_OFFSET    (2 * PAGE_SIZE)
168
169 #ifndef __ASSEMBLY__
170
171 #include <linux/bitops.h>
172 #include <linux/compiler.h>
173 #include <linux/mmdebug.h>
174 #include <linux/types.h>
175 #include <asm/bug.h>
176
177 extern u64                      vabits_actual;
178
179 extern s64                      memstart_addr;
180 /* PHYS_OFFSET - the physical address of the start of memory. */
181 #define PHYS_OFFSET             ({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
182
183 /* the virtual base of the kernel image */
184 extern u64                      kimage_vaddr;
185
186 /* the offset between the kernel virtual and physical mappings */
187 extern u64                      kimage_voffset;
188
189 static inline unsigned long kaslr_offset(void)
190 {
191         return kimage_vaddr - KIMAGE_VADDR;
192 }
193
194 /*
195  * Allow all memory at the discovery stage. We will clip it later.
196  */
197 #define MIN_MEMBLOCK_ADDR       0
198 #define MAX_MEMBLOCK_ADDR       U64_MAX
199
200 /*
201  * PFNs are used to describe any physical page; this means
202  * PFN 0 == physical address 0.
203  *
204  * This is the PFN of the first RAM page in the kernel
205  * direct-mapped view.  We assume this is the first page
206  * of RAM in the mem_map as well.
207  */
208 #define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
209
210 /*
211  * When dealing with data aborts, watchpoints, or instruction traps we may end
212  * up with a tagged userland pointer. Clear the tag to get a sane pointer to
213  * pass on to access_ok(), for instance.
214  */
215 #define __untagged_addr(addr)   \
216         ((__force __typeof__(addr))sign_extend64((__force u64)(addr), 55))
217
218 #define untagged_addr(addr)     ({                                      \
219         u64 __addr = (__force u64)(addr);                                       \
220         __addr &= __untagged_addr(__addr);                              \
221         (__force __typeof__(addr))__addr;                               \
222 })
223
224 #if defined(CONFIG_KASAN_SW_TAGS) || defined(CONFIG_KASAN_HW_TAGS)
225 #define __tag_shifted(tag)      ((u64)(tag) << 56)
226 #define __tag_reset(addr)       __untagged_addr(addr)
227 #define __tag_get(addr)         (__u8)((u64)(addr) >> 56)
228 #else
229 #define __tag_shifted(tag)      0UL
230 #define __tag_reset(addr)       (addr)
231 #define __tag_get(addr)         0
232 #endif /* CONFIG_KASAN_SW_TAGS || CONFIG_KASAN_HW_TAGS */
233
234 static inline const void *__tag_set(const void *addr, u8 tag)
235 {
236         u64 __addr = (u64)addr & ~__tag_shifted(0xff);
237         return (const void *)(__addr | __tag_shifted(tag));
238 }
239
240 #ifdef CONFIG_KASAN_HW_TAGS
241 #define arch_enable_tagging_sync()              mte_enable_kernel_sync()
242 #define arch_enable_tagging_async()             mte_enable_kernel_async()
243 #define arch_enable_tagging_asymm()             mte_enable_kernel_asymm()
244 #define arch_force_async_tag_fault()            mte_check_tfsr_exit()
245 #define arch_get_random_tag()                   mte_get_random_tag()
246 #define arch_get_mem_tag(addr)                  mte_get_mem_tag(addr)
247 #define arch_set_mem_tag_range(addr, size, tag, init)   \
248                         mte_set_mem_tag_range((addr), (size), (tag), (init))
249 #endif /* CONFIG_KASAN_HW_TAGS */
250
251 /*
252  * Physical vs virtual RAM address space conversion.  These are
253  * private definitions which should NOT be used outside memory.h
254  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
255  */
256
257
258 /*
259  * Check whether an arbitrary address is within the linear map, which
260  * lives in the [PAGE_OFFSET, PAGE_END) interval at the bottom of the
261  * kernel's TTBR1 address range.
262  */
263 #define __is_lm_address(addr)   (((u64)(addr) - PAGE_OFFSET) < (PAGE_END - PAGE_OFFSET))
264
265 #define __lm_to_phys(addr)      (((addr) - PAGE_OFFSET) + PHYS_OFFSET)
266 #define __kimg_to_phys(addr)    ((addr) - kimage_voffset)
267
268 #define __virt_to_phys_nodebug(x) ({                                    \
269         phys_addr_t __x = (phys_addr_t)(__tag_reset(x));                \
270         __is_lm_address(__x) ? __lm_to_phys(__x) : __kimg_to_phys(__x); \
271 })
272
273 #define __pa_symbol_nodebug(x)  __kimg_to_phys((phys_addr_t)(x))
274
275 #ifdef CONFIG_DEBUG_VIRTUAL
276 extern phys_addr_t __virt_to_phys(unsigned long x);
277 extern phys_addr_t __phys_addr_symbol(unsigned long x);
278 #else
279 #define __virt_to_phys(x)       __virt_to_phys_nodebug(x)
280 #define __phys_addr_symbol(x)   __pa_symbol_nodebug(x)
281 #endif /* CONFIG_DEBUG_VIRTUAL */
282
283 #define __phys_to_virt(x)       ((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET)
284 #define __phys_to_kimg(x)       ((unsigned long)((x) + kimage_voffset))
285
286 /*
287  * Convert a page to/from a physical address
288  */
289 #define page_to_phys(page)      (__pfn_to_phys(page_to_pfn(page)))
290 #define phys_to_page(phys)      (pfn_to_page(__phys_to_pfn(phys)))
291
292 /*
293  * Note: Drivers should NOT use these.  They are the wrong
294  * translation for translating DMA addresses.  Use the driver
295  * DMA support - see dma-mapping.h.
296  */
297 #define virt_to_phys virt_to_phys
298 static inline phys_addr_t virt_to_phys(const volatile void *x)
299 {
300         return __virt_to_phys((unsigned long)(x));
301 }
302
303 #define phys_to_virt phys_to_virt
304 static inline void *phys_to_virt(phys_addr_t x)
305 {
306         return (void *)(__phys_to_virt(x));
307 }
308
309 /*
310  * Drivers should NOT use these either.
311  */
312 #define __pa(x)                 __virt_to_phys((unsigned long)(x))
313 #define __pa_symbol(x)          __phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0))
314 #define __pa_nodebug(x)         __virt_to_phys_nodebug((unsigned long)(x))
315 #define __va(x)                 ((void *)__phys_to_virt((phys_addr_t)(x)))
316 #define pfn_to_kaddr(pfn)       __va((pfn) << PAGE_SHIFT)
317 #define virt_to_pfn(x)          __phys_to_pfn(__virt_to_phys((unsigned long)(x)))
318 #define sym_to_pfn(x)           __phys_to_pfn(__pa_symbol(x))
319
320 /*
321  *  virt_to_page(x)     convert a _valid_ virtual address to struct page *
322  *  virt_addr_valid(x)  indicates whether a virtual address is valid
323  */
324 #define ARCH_PFN_OFFSET         ((unsigned long)PHYS_PFN_OFFSET)
325
326 #if defined(CONFIG_DEBUG_VIRTUAL)
327 #define page_to_virt(x) ({                                              \
328         __typeof__(x) __page = x;                                       \
329         void *__addr = __va(page_to_phys(__page));                      \
330         (void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\
331 })
332 #define virt_to_page(x)         pfn_to_page(virt_to_pfn(x))
333 #else
334 #define page_to_virt(x) ({                                              \
335         __typeof__(x) __page = x;                                       \
336         u64 __idx = ((u64)__page - VMEMMAP_START) / sizeof(struct page);\
337         u64 __addr = PAGE_OFFSET + (__idx * PAGE_SIZE);                 \
338         (void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\
339 })
340
341 #define virt_to_page(x) ({                                              \
342         u64 __idx = (__tag_reset((u64)x) - PAGE_OFFSET) / PAGE_SIZE;    \
343         u64 __addr = VMEMMAP_START + (__idx * sizeof(struct page));     \
344         (struct page *)__addr;                                          \
345 })
346 #endif /* CONFIG_DEBUG_VIRTUAL */
347
348 #define virt_addr_valid(addr)   ({                                      \
349         __typeof__(addr) __addr = __tag_reset(addr);                    \
350         __is_lm_address(__addr) && pfn_is_map_memory(virt_to_pfn(__addr));      \
351 })
352
353 void dump_mem_limit(void);
354 #endif /* !ASSEMBLY */
355
356 /*
357  * Given that the GIC architecture permits ITS implementations that can only be
358  * configured with a LPI table address once, GICv3 systems with many CPUs may
359  * end up reserving a lot of different regions after a kexec for their LPI
360  * tables (one per CPU), as we are forced to reuse the same memory after kexec
361  * (and thus reserve it persistently with EFI beforehand)
362  */
363 #if defined(CONFIG_EFI) && defined(CONFIG_ARM_GIC_V3_ITS)
364 # define INIT_MEMBLOCK_RESERVED_REGIONS (INIT_MEMBLOCK_REGIONS + NR_CPUS + 1)
365 #endif
366
367 #include <asm-generic/memory_model.h>
368
369 #endif /* __ASM_MEMORY_H */