arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb10max3.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2
   3 /dts-v1/;
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/linux-event-codes.h>
   7 #include <dt-bindings/pinctrl/rockchip.h>
   8 #include "rk3566-powkiddy-rk2023.dtsi"
   9
  10 / {
  11         model = "Powkiddy RGB10MAX3";
  12         compatible = "powkiddy,rgb10max3", "rockchip,rk3566";
  13 };
  14
  15 &bluetooth {
  16         compatible = "realtek,rtl8723ds-bt";
  17 };
  18
  19 &cru {
  20         assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
  21                           <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
  22         assigned-clock-rates = <32768>, <1200000000>,
  23                                <200000000>, <126400000>;
  24 };
  25
  26 &dsi0 {
  27         panel: panel@0 {
  28                 compatible = "powkiddy,rgb10max3-panel";
  29                 reg = <0>;
  30                 backlight = <&backlight>;
  31                 iovcc-supply = <&vcc3v3_lcd0_n>;
  32                 pinctrl-0 = <&lcd_rst>;
  33                 pinctrl-names = "default";
  34                 reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
  35                 rotation = <270>;
  36                 vcc-supply = <&vcc3v3_lcd0_n>;
  37
  38                 port {
  39                         mipi_in_panel: endpoint {
  40                                 remote-endpoint = <&mipi_out_panel>;
  41                         };
  42                 };
  43         };
  44 };
  45
  46 &green_led {
  47         default-state = "on";
  48         function = LED_FUNCTION_POWER;
  49 };
  50
  51 &i2c0 {
  52         vdd_cpu: regulator@40 {
  53                 compatible = "fcs,fan53555";
  54                 reg = <0x40>;
  55                 fcs,suspend-voltage-selector = <1>;
  56                 regulator-always-on;
  57                 regulator-boot-on;
  58                 regulator-min-microvolt = <712500>;
  59                 regulator-max-microvolt = <1390000>;
  60                 regulator-name = "vdd_cpu";
  61                 regulator-ramp-delay = <2300>;
  62                 vin-supply = <&vcc_sys>;
  63                 regulator-state-mem {
  64                         regulator-off-in-suspend;
  65                 };
  66         };
  67 };
  68
  69 &leds {
  70         amber_led: led-2 {
  71                 color = <LED_COLOR_ID_AMBER>;
  72                 function = LED_FUNCTION_CHARGING;
  73                 max-brightness = <255>;
  74                 pwms = <&pwm0 0 25000 0>;
  75         };
  76 };
  77
  78 &pwm0 {
  79         pinctrl-0 = <&pwm0m1_pins>;
  80         pinctrl-names = "default";
  81         status = "okay";
  82 };
  83
  84 &red_led {
  85         default-state = "off";
  86         function = LED_FUNCTION_STATUS;
  87 };