arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
   4  * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
   5  */
   6
   7 #include <dt-bindings/input/linux-event-codes.h>
   8 #include <dt-bindings/pwm/pwm.h>
   9 #include "rk3399.dtsi"
  10 #include "rk3399-opp.dtsi"
  11
  12 / {
  13         aliases {
  14                 mmc0 = &sdio0;
  15                 mmc1 = &sdmmc;
  16                 mmc2 = &sdhci;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial2:1500000n8";
  21         };
  22
  23         clkin_gmac: external-gmac-clock {
  24                 compatible = "fixed-clock";
  25                 clock-frequency = <125000000>;
  26                 clock-output-names = "clkin_gmac";
  27                 #clock-cells = <0>;
  28         };
  29
  30         gpio-keys {
  31                 compatible = "gpio-keys";
  32                 autorepeat;
  33                 pinctrl-names = "default";
  34                 pinctrl-0 = <&pwrbtn>;
  35
  36                 power {
  37                         debounce-interval = <100>;
  38                         gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
  39                         label = "GPIO Key Power";
  40                         linux,code = <KEY_POWER>;
  41                         wakeup-source;
  42                 };
  43         };
  44
  45         ir-receiver {
  46                 compatible = "gpio-ir-receiver";
  47                 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
  48                 pinctrl-0 = <&ir_int>;
  49                 pinctrl-names = "default";
  50         };
  51
  52         leds {
  53                 compatible = "gpio-leds";
  54                 pinctrl-names = "default";
  55                 pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
  56
  57                 work_led: led-0 {
  58                         label = "work";
  59                         default-state = "on";
  60                         gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
  61                 };
  62
  63                 diy_led: led-1 {
  64                         label = "diy";
  65                         default-state = "off";
  66                         gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
  67                 };
  68         };
  69
  70         fan: pwm-fan {
  71                 compatible = "pwm-fan";
  72                 cooling-levels = <0 100 150 200 255>;
  73                 #cooling-cells = <2>;
  74                 fan-supply = <&vcc12v_dcin>;
  75                 pwms = <&pwm1 0 50000 0>;
  76         };
  77
  78         sdio_pwrseq: sdio-pwrseq {
  79                 compatible = "mmc-pwrseq-simple";
  80                 clocks = <&rk808 1>;
  81                 clock-names = "ext_clock";
  82                 pinctrl-names = "default";
  83                 pinctrl-0 = <&wifi_enable_h>;
  84                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
  85         };
  86
  87         sound {
  88                 compatible = "audio-graph-card";
  89                 label = "Analog";
  90                 dais = <&i2s1_p0>;
  91         };
  92
  93         sound-dit {
  94                 compatible = "audio-graph-card";
  95                 label = "SPDIF";
  96                 dais = <&spdif_p0>;
  97         };
  98
  99         spdif-dit {
 100                 compatible = "linux,spdif-dit";
 101                 #sound-dai-cells = <0>;
 102
 103                 port {
 104                         dit_p0_0: endpoint {
 105                                 remote-endpoint = <&spdif_p0_0>;
 106                         };
 107                 };
 108         };
 109
 110         vcc12v_dcin: vcc12v-dcin {
 111                 compatible = "regulator-fixed";
 112                 regulator-name = "vcc12v_dcin";
 113                 regulator-always-on;
 114                 regulator-boot-on;
 115                 regulator-min-microvolt = <12000000>;
 116                 regulator-max-microvolt = <12000000>;
 117         };
 118
 119         /* switched by pmic_sleep */
 120         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 121                 compatible = "regulator-fixed";
 122                 regulator-name = "vcc1v8_s3";
 123                 regulator-always-on;
 124                 regulator-boot-on;
 125                 regulator-min-microvolt = <1800000>;
 126                 regulator-max-microvolt = <1800000>;
 127                 vin-supply = <&vcc_1v8>;
 128         };
 129
 130         /* micro SD card power */
 131         vcc3v0_sd: vcc3v0-sd {
 132                 compatible = "regulator-fixed";
 133                 enable-active-high;
 134                 gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
 135                 pinctrl-names = "default";
 136                 pinctrl-0 = <&sdmmc0_pwr_h>;
 137                 regulator-name = "vcc3v0_sd";
 138                 regulator-always-on;
 139                 regulator-min-microvolt = <3000000>;
 140                 regulator-max-microvolt = <3000000>;
 141                 vin-supply = <&vcc3v3_sys>;
 142
 143                 regulator-state-mem {
 144                         regulator-off-in-suspend;
 145                 };
 146         };
 147
 148         vcc3v3_pcie: vcc3v3-pcie-regulator {
 149                 compatible = "regulator-fixed";
 150                 enable-active-high;
 151                 gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
 152                 pinctrl-names = "default";
 153                 pinctrl-0 = <&pcie_pwr_en>;
 154                 regulator-name = "vcc3v3_pcie";
 155                 regulator-always-on;
 156                 regulator-boot-on;
 157                 vin-supply = <&vcc12v_dcin>;
 158         };
 159
 160         vcc3v3_sys: vcc3v3-sys {
 161                 compatible = "regulator-fixed";
 162                 regulator-name = "vcc3v3_sys";
 163                 regulator-always-on;
 164                 regulator-boot-on;
 165                 regulator-min-microvolt = <3300000>;
 166                 regulator-max-microvolt = <3300000>;
 167                 vin-supply = <&vcc5v0_sys>;
 168         };
 169
 170         /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
 171         vcc5v0_host: vcc5v0-host-regulator {
 172                 compatible = "regulator-fixed";
 173                 enable-active-high;
 174                 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
 175                 pinctrl-names = "default";
 176                 pinctrl-0 = <&vcc5v0_host_en>;
 177                 regulator-name = "vcc5v0_host";
 178                 regulator-always-on;
 179                 vin-supply = <&vcc5v0_usb>;
 180         };
 181
 182         vcc5v0_typec: vcc5v0-typec-regulator {
 183                 compatible = "regulator-fixed";
 184                 enable-active-high;
 185                 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
 186                 pinctrl-names = "default";
 187                 pinctrl-0 = <&vcc5v0_typec_en>;
 188                 regulator-name = "vcc5v0_typec";
 189                 regulator-always-on;
 190                 vin-supply = <&vcc5v0_usb>;
 191         };
 192
 193         vcc5v0_sys: vcc5v0-sys {
 194                 compatible = "regulator-fixed";
 195                 regulator-name = "vcc5v0_sys";
 196                 regulator-always-on;
 197                 regulator-boot-on;
 198                 regulator-min-microvolt = <5000000>;
 199                 regulator-max-microvolt = <5000000>;
 200                 vin-supply = <&vcc12v_dcin>;
 201         };
 202
 203         vcc5v0_usb: vcc5v0-usb {
 204                 compatible = "regulator-fixed";
 205                 regulator-name = "vcc5v0_usb";
 206                 regulator-always-on;
 207                 regulator-boot-on;
 208                 regulator-min-microvolt = <5000000>;
 209                 regulator-max-microvolt = <5000000>;
 210                 vin-supply = <&vcc12v_dcin>;
 211         };
 212
 213         vdd_log: vdd-log {
 214                 compatible = "pwm-regulator";
 215                 pwms = <&pwm2 0 25000 1>;
 216                 regulator-name = "vdd_log";
 217                 regulator-always-on;
 218                 regulator-boot-on;
 219                 regulator-min-microvolt = <800000>;
 220                 regulator-max-microvolt = <1700000>;
 221                 vin-supply = <&vcc5v0_sys>;
 222         };
 223 };
 224
 225 &cpu_l0 {
 226         cpu-supply = <&vdd_cpu_l>;
 227 };
 228
 229 &cpu_l1 {
 230         cpu-supply = <&vdd_cpu_l>;
 231 };
 232
 233 &cpu_l2 {
 234         cpu-supply = <&vdd_cpu_l>;
 235 };
 236
 237 &cpu_l3 {
 238         cpu-supply = <&vdd_cpu_l>;
 239 };
 240
 241 &cpu_b0 {
 242         cpu-supply = <&vdd_cpu_b>;
 243 };
 244
 245 &cpu_b1 {
 246         cpu-supply = <&vdd_cpu_b>;
 247 };
 248
 249 &cpu_thermal {
 250         trips {
 251                 cpu_warm: cpu_warm {
 252                         temperature = <55000>;
 253                         hysteresis = <2000>;
 254                         type = "active";
 255                 };
 256
 257                 cpu_hot: cpu_hot {
 258                         temperature = <65000>;
 259                         hysteresis = <2000>;
 260                         type = "active";
 261                 };
 262         };
 263
 264         cooling-maps {
 265                 map2 {
 266                         trip = <&cpu_warm>;
 267                         cooling-device = <&fan THERMAL_NO_LIMIT 1>;
 268                 };
 269
 270                 map3 {
 271                         trip = <&cpu_hot>;
 272                         cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
 273                 };
 274         };
 275 };
 276
 277 &emmc_phy {
 278         status = "okay";
 279 };
 280
 281 &gmac {
 282         assigned-clocks = <&cru SCLK_RMII_SRC>;
 283         assigned-clock-parents = <&clkin_gmac>;
 284         clock_in_out = "input";
 285         phy-supply = <&vcc_lan>;
 286         phy-mode = "rgmii";
 287         pinctrl-names = "default";
 288         pinctrl-0 = <&rgmii_pins>;
 289         snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 290         snps,reset-active-low;
 291         snps,reset-delays-us = <0 10000 50000>;
 292         tx_delay = <0x28>;
 293         rx_delay = <0x11>;
 294         status = "okay";
 295 };
 296
 297 &hdmi {
 298         ddc-i2c-bus = <&i2c3>;
 299         pinctrl-names = "default";
 300         pinctrl-0 = <&hdmi_cec>;
 301         status = "okay";
 302 };
 303
 304 &hdmi_sound {
 305         status = "okay";
 306 };
 307
 308 &gpu {
 309         mali-supply = <&vdd_gpu>;
 310         status = "okay";
 311 };
 312
 313 &i2c0 {
 314         clock-frequency = <400000>;
 315         i2c-scl-rising-time-ns = <168>;
 316         i2c-scl-falling-time-ns = <4>;
 317         status = "okay";
 318
 319         rk808: pmic@1b {
 320                 compatible = "rockchip,rk808";
 321                 reg = <0x1b>;
 322                 interrupt-parent = <&gpio3>;
 323                 interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 324                 #clock-cells = <1>;
 325                 clock-output-names = "xin32k", "rk808-clkout2";
 326                 pinctrl-names = "default";
 327                 pinctrl-0 = <&pmic_int_l>;
 328                 rockchip,system-power-controller;
 329                 wakeup-source;
 330
 331                 vcc1-supply = <&vcc5v0_sys>;
 332                 vcc2-supply = <&vcc5v0_sys>;
 333                 vcc3-supply = <&vcc5v0_sys>;
 334                 vcc4-supply = <&vcc5v0_sys>;
 335                 vcc6-supply = <&vcc5v0_sys>;
 336                 vcc7-supply = <&vcc5v0_sys>;
 337                 vcc8-supply = <&vcc3v3_sys>;
 338                 vcc9-supply = <&vcc5v0_sys>;
 339                 vcc10-supply = <&vcc5v0_sys>;
 340                 vcc11-supply = <&vcc5v0_sys>;
 341                 vcc12-supply = <&vcc3v3_sys>;
 342                 vddio-supply = <&vcca_1v8>;
 343
 344                 regulators {
 345                         vdd_center: DCDC_REG1 {
 346                                 regulator-name = "vdd_center";
 347                                 regulator-always-on;
 348                                 regulator-boot-on;
 349                                 regulator-min-microvolt = <750000>;
 350                                 regulator-max-microvolt = <1350000>;
 351                                 regulator-ramp-delay = <6001>;
 352                                 regulator-state-mem {
 353                                         regulator-off-in-suspend;
 354                                 };
 355                         };
 356
 357                         vdd_cpu_l: DCDC_REG2 {
 358                                 regulator-name = "vdd_cpu_l";
 359                                 regulator-always-on;
 360                                 regulator-boot-on;
 361                                 regulator-min-microvolt = <750000>;
 362                                 regulator-max-microvolt = <1350000>;
 363                                 regulator-ramp-delay = <6001>;
 364                                 regulator-state-mem {
 365                                         regulator-off-in-suspend;
 366                                 };
 367                         };
 368
 369                         vcc_ddr: DCDC_REG3 {
 370                                 regulator-name = "vcc_ddr";
 371                                 regulator-always-on;
 372                                 regulator-boot-on;
 373                                 regulator-state-mem {
 374                                         regulator-on-in-suspend;
 375                                 };
 376                         };
 377
 378                         vcc_1v8: DCDC_REG4 {
 379                                 regulator-name = "vcc_1v8";
 380                                 regulator-always-on;
 381                                 regulator-boot-on;
 382                                 regulator-min-microvolt = <1800000>;
 383                                 regulator-max-microvolt = <1800000>;
 384                                 regulator-state-mem {
 385                                         regulator-on-in-suspend;
 386                                         regulator-suspend-microvolt = <1800000>;
 387                                 };
 388                         };
 389
 390                         vcc1v8_dvp: LDO_REG1 {
 391                                 regulator-name = "vcc1v8_dvp";
 392                                 regulator-always-on;
 393                                 regulator-boot-on;
 394                                 regulator-min-microvolt = <1800000>;
 395                                 regulator-max-microvolt = <1800000>;
 396                                 regulator-state-mem {
 397                                         regulator-off-in-suspend;
 398                                 };
 399                         };
 400
 401                         vcc3v0_touch: LDO_REG2 {
 402                                 regulator-name = "vcc3v0_touch";
 403                                 regulator-always-on;
 404                                 regulator-boot-on;
 405                                 regulator-min-microvolt = <3000000>;
 406                                 regulator-max-microvolt = <3000000>;
 407                                 regulator-state-mem {
 408                                         regulator-off-in-suspend;
 409                                 };
 410                         };
 411
 412                         vcca_1v8: LDO_REG3 {
 413                                 regulator-name = "vcca_1v8";
 414                                 regulator-always-on;
 415                                 regulator-boot-on;
 416                                 regulator-min-microvolt = <1800000>;
 417                                 regulator-max-microvolt = <1800000>;
 418                                 regulator-state-mem {
 419                                         regulator-on-in-suspend;
 420                                         regulator-suspend-microvolt = <1800000>;
 421                                 };
 422                         };
 423
 424                         vcc_sdio: LDO_REG4 {
 425                                 regulator-name = "vcc_sdio";
 426                                 regulator-always-on;
 427                                 regulator-boot-on;
 428                                 regulator-min-microvolt = <1800000>;
 429                                 regulator-max-microvolt = <3000000>;
 430                                 regulator-state-mem {
 431                                         regulator-on-in-suspend;
 432                                         regulator-suspend-microvolt = <3000000>;
 433                                 };
 434                         };
 435
 436                         vcca3v0_codec: LDO_REG5 {
 437                                 regulator-name = "vcca3v0_codec";
 438                                 regulator-always-on;
 439                                 regulator-boot-on;
 440                                 regulator-min-microvolt = <3000000>;
 441                                 regulator-max-microvolt = <3000000>;
 442                                 regulator-state-mem {
 443                                         regulator-off-in-suspend;
 444                                 };
 445                         };
 446
 447                         vcc_1v5: LDO_REG6 {
 448                                 regulator-name = "vcc_1v5";
 449                                 regulator-always-on;
 450                                 regulator-boot-on;
 451                                 regulator-min-microvolt = <1500000>;
 452                                 regulator-max-microvolt = <1500000>;
 453                                 regulator-state-mem {
 454                                         regulator-on-in-suspend;
 455                                         regulator-suspend-microvolt = <1500000>;
 456                                 };
 457                         };
 458
 459                         vcca1v8_codec: LDO_REG7 {
 460                                 regulator-name = "vcca1v8_codec";
 461                                 regulator-always-on;
 462                                 regulator-boot-on;
 463                                 regulator-min-microvolt = <1800000>;
 464                                 regulator-max-microvolt = <1800000>;
 465                                 regulator-state-mem {
 466                                         regulator-off-in-suspend;
 467                                 };
 468                         };
 469
 470                         vcc_3v0: LDO_REG8 {
 471                                 regulator-name = "vcc_3v0";
 472                                 regulator-always-on;
 473                                 regulator-boot-on;
 474                                 regulator-min-microvolt = <3000000>;
 475                                 regulator-max-microvolt = <3000000>;
 476                                 regulator-state-mem {
 477                                         regulator-on-in-suspend;
 478                                         regulator-suspend-microvolt = <3000000>;
 479                                 };
 480                         };
 481
 482                         vcc3v3_s3: vcc_lan: SWITCH_REG1 {
 483                                 regulator-name = "vcc3v3_s3";
 484                                 regulator-always-on;
 485                                 regulator-boot-on;
 486                                 regulator-state-mem {
 487                                         regulator-off-in-suspend;
 488                                 };
 489                         };
 490
 491                         vcc3v3_s0: SWITCH_REG2 {
 492                                 regulator-name = "vcc3v3_s0";
 493                                 regulator-always-on;
 494                                 regulator-boot-on;
 495                                 regulator-state-mem {
 496                                         regulator-off-in-suspend;
 497                                 };
 498                         };
 499                 };
 500         };
 501
 502         vdd_cpu_b: regulator@40 {
 503                 compatible = "silergy,syr827";
 504                 reg = <0x40>;
 505                 fcs,suspend-voltage-selector = <1>;
 506                 pinctrl-names = "default";
 507                 pinctrl-0 = <&vsel1_pin>;
 508                 regulator-name = "vdd_cpu_b";
 509                 regulator-min-microvolt = <712500>;
 510                 regulator-max-microvolt = <1500000>;
 511                 regulator-ramp-delay = <1000>;
 512                 regulator-always-on;
 513                 regulator-boot-on;
 514                 vin-supply = <&vcc5v0_sys>;
 515
 516                 regulator-state-mem {
 517                         regulator-off-in-suspend;
 518                 };
 519         };
 520
 521         vdd_gpu: regulator@41 {
 522                 compatible = "silergy,syr828";
 523                 reg = <0x41>;
 524                 fcs,suspend-voltage-selector = <1>;
 525                 pinctrl-names = "default";
 526                 pinctrl-0 = <&vsel2_pin>;
 527                 regulator-name = "vdd_gpu";
 528                 regulator-min-microvolt = <712500>;
 529                 regulator-max-microvolt = <1500000>;
 530                 regulator-ramp-delay = <1000>;
 531                 regulator-always-on;
 532                 regulator-boot-on;
 533                 vin-supply = <&vcc5v0_sys>;
 534
 535                 regulator-state-mem {
 536                         regulator-off-in-suspend;
 537                 };
 538         };
 539 };
 540
 541 &i2c1 {
 542         i2c-scl-rising-time-ns = <300>;
 543         i2c-scl-falling-time-ns = <15>;
 544         status = "okay";
 545 };
 546
 547 &i2c3 {
 548         i2c-scl-rising-time-ns = <450>;
 549         i2c-scl-falling-time-ns = <15>;
 550         status = "okay";
 551 };
 552
 553 &i2c4 {
 554         i2c-scl-rising-time-ns = <600>;
 555         i2c-scl-falling-time-ns = <20>;
 556         status = "okay";
 557
 558         fusb0: typec-portc@22 {
 559                 compatible = "fcs,fusb302";
 560                 reg = <0x22>;
 561                 interrupt-parent = <&gpio1>;
 562                 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 563                 pinctrl-names = "default";
 564                 pinctrl-0 = <&fusb0_int>;
 565                 vbus-supply = <&vcc5v0_typec>;
 566                 status = "okay";
 567         };
 568 };
 569
 570 &i2s0 {
 571         rockchip,playback-channels = <8>;
 572         rockchip,capture-channels = <8>;
 573         status = "okay";
 574 };
 575
 576 &i2s1 {
 577         rockchip,playback-channels = <2>;
 578         rockchip,capture-channels = <2>;
 579         status = "okay";
 580
 581         i2s1_p0: port {
 582                 i2s1_p0_0: endpoint {
 583                         dai-format = "i2s";
 584                         mclk-fs = <256>;
 585                         remote-endpoint = <&es8316_p0_0>;
 586                 };
 587         };
 588 };
 589
 590 &i2s2 {
 591         status = "okay";
 592 };
 593
 594 &io_domains {
 595         status = "okay";
 596
 597         bt656-supply = <&vcc1v8_dvp>;
 598         audio-supply = <&vcc_3v0>;
 599         sdmmc-supply = <&vcc_sdio>;
 600         gpio1830-supply = <&vcc_3v0>;
 601 };
 602
 603 &pcie0 {
 604         ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 605         num-lanes = <4>;
 606         pinctrl-names = "default";
 607         pinctrl-0 = <&pcie_perst>;
 608         vpcie12v-supply = <&vcc12v_dcin>;
 609         vpcie3v3-supply = <&vcc3v3_pcie>;
 610         status = "okay";
 611 };
 612
 613 &pcie_phy {
 614         status = "okay";
 615 };
 616
 617 &pmu_io_domains {
 618         pmu1830-supply = <&vcc_3v0>;
 619         status = "okay";
 620 };
 621
 622 &pinctrl {
 623         bt {
 624                 bt_enable_h: bt-enable-h {
 625                         rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 626                 };
 627
 628                 bt_host_wake_l: bt-host-wake-l {
 629                         rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
 630                 };
 631
 632                 bt_wake_l: bt-wake-l {
 633                         rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 634                 };
 635         };
 636
 637         buttons {
 638                 pwrbtn: pwrbtn {
 639                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 640                 };
 641         };
 642
 643         fusb302x {
 644                 fusb0_int: fusb0-int {
 645                         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 646                 };
 647         };
 648
 649         ir {
 650                 ir_int: ir-int {
 651                         rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 652                 };
 653         };
 654
 655         leds {
 656                 work_led_pin: work-led-pin {
 657                         rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 658                 };
 659
 660                 diy_led_pin: diy-led-pin {
 661                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 662                 };
 663         };
 664
 665         pcie {
 666                 pcie_perst: pcie-perst {
 667                         rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 668                 };
 669
 670                 pcie_pwr_en: pcie-pwr-en {
 671                         rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 672                 };
 673         };
 674
 675         pmic {
 676                 pmic_int_l: pmic-int-l {
 677                         rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 678                 };
 679
 680                 vsel1_pin: vsel1-pin {
 681                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 682                 };
 683
 684                 vsel2_pin: vsel2-pin {
 685                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 686                 };
 687         };
 688
 689         sdcard {
 690                 sdmmc0_pwr_h: sdmmc0-pwr-h {
 691                         rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 692                 };
 693
 694         };
 695
 696         sdio-pwrseq {
 697                 wifi_enable_h: wifi-enable-h {
 698                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 699                 };
 700         };
 701
 702         usb-typec {
 703                 vcc5v0_typec_en: vcc5v0_typec_en {
 704                         rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 705                 };
 706         };
 707
 708         usb2 {
 709                 vcc5v0_host_en: vcc5v0-host-en {
 710                         rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 711                 };
 712         };
 713 };
 714
 715 &pwm0 {
 716         status = "okay";
 717 };
 718
 719 &pwm1 {
 720         status = "okay";
 721 };
 722
 723 &pwm2 {
 724         status = "okay";
 725 };
 726
 727 &saradc {
 728         vref-supply = <&vcca1v8_s3>;
 729         status = "okay";
 730 };
 731
 732 &sdio0 {
 733         bus-width = <4>;
 734         cap-sd-highspeed;
 735         cap-sdio-irq;
 736         disable-wp;
 737         keep-power-in-suspend;
 738         mmc-pwrseq = <&sdio_pwrseq>;
 739         non-removable;
 740         pinctrl-names = "default";
 741         pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 742         sd-uhs-sdr104;
 743         status = "okay";
 744 };
 745
 746 &sdmmc {
 747         bus-width = <4>;
 748         cap-sd-highspeed;
 749         cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 750         disable-wp;
 751         max-frequency = <150000000>;
 752         pinctrl-names = "default";
 753         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
 754         vmmc-supply = <&vcc3v0_sd>;
 755         vqmmc-supply = <&vcc_sdio>;
 756         status = "okay";
 757 };
 758
 759 &sdhci {
 760         bus-width = <8>;
 761         mmc-hs200-1_8v;
 762         non-removable;
 763         status = "okay";
 764 };
 765
 766 &spdif {
 767         pinctrl-0 = <&spdif_bus_1>;
 768
 769         spdif_p0: port {
 770                 spdif_p0_0: endpoint {
 771                         remote-endpoint = <&dit_p0_0>;
 772                 };
 773         };
 774 };
 775
 776 &spi1 {
 777         status = "okay";
 778
 779         flash@0 {
 780                 compatible = "jedec,spi-nor";
 781                 reg = <0>;
 782                 spi-max-frequency = <10000000>;
 783         };
 784 };
 785
 786 &tcphy0 {
 787         status = "okay";
 788 };
 789
 790 &tcphy1 {
 791         status = "okay";
 792 };
 793
 794 &tsadc {
 795         /* tshut mode 0:CRU 1:GPIO */
 796         rockchip,hw-tshut-mode = <1>;
 797         /* tshut polarity 0:LOW 1:HIGH */
 798         rockchip,hw-tshut-polarity = <1>;
 799         status = "okay";
 800 };
 801
 802 &u2phy0 {
 803         status = "okay";
 804
 805         u2phy0_otg: otg-port {
 806                 status = "okay";
 807         };
 808
 809         u2phy0_host: host-port {
 810                 phy-supply = <&vcc5v0_host>;
 811                 status = "okay";
 812         };
 813 };
 814
 815 &u2phy1 {
 816         status = "okay";
 817
 818         u2phy1_otg: otg-port {
 819                 status = "okay";
 820         };
 821
 822         u2phy1_host: host-port {
 823                 phy-supply = <&vcc5v0_host>;
 824                 status = "okay";
 825         };
 826 };
 827
 828 &uart0 {
 829         pinctrl-names = "default";
 830         pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 831         status = "okay";
 832
 833         bluetooth {
 834                 compatible = "brcm,bcm43438-bt";
 835                 clocks = <&rk808 1>;
 836                 clock-names = "lpo";
 837                 device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 838                 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 839                 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
 840                 pinctrl-names = "default";
 841                 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
 842                 vbat-supply = <&vcc3v3_sys>;
 843                 vddio-supply = <&vcc_1v8>;
 844         };
 845 };
 846
 847 &uart2 {
 848         status = "okay";
 849 };
 850
 851 &usb_host0_ehci {
 852         status = "okay";
 853 };
 854
 855 &usb_host0_ohci {
 856         status = "okay";
 857 };
 858
 859 &usb_host1_ehci {
 860         status = "okay";
 861 };
 862
 863 &usb_host1_ohci {
 864         status = "okay";
 865 };
 866
 867 &usbdrd3_0 {
 868         status = "okay";
 869 };
 870
 871 &usbdrd_dwc3_0 {
 872         status = "okay";
 873         dr_mode = "host";
 874 };
 875
 876 &usbdrd3_1 {
 877         status = "okay";
 878 };
 879
 880 &usbdrd_dwc3_1 {
 881         status = "okay";
 882         dr_mode = "host";
 883 };
 884
 885 &vopb {
 886         status = "okay";
 887 };
 888
 889 &vopb_mmu {
 890         status = "okay";
 891 };
 892
 893 &vopl {
 894         status = "okay";
 895 };
 896
 897 &vopl_mmu {
 898         status = "okay";
 899 };