arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
   4  * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
   5  */
   6
   7 #include <dt-bindings/input/linux-event-codes.h>
   8 #include <dt-bindings/pwm/pwm.h>
   9 #include "rk3399.dtsi"
  10 #include "rk3399-opp.dtsi"
  11
  12 / {
  13         aliases {
  14                 mmc0 = &sdio0;
  15                 mmc1 = &sdmmc;
  16                 mmc2 = &sdhci;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial2:1500000n8";
  21         };
  22
  23         clkin_gmac: external-gmac-clock {
  24                 compatible = "fixed-clock";
  25                 clock-frequency = <125000000>;
  26                 clock-output-names = "clkin_gmac";
  27                 #clock-cells = <0>;
  28         };
  29
  30         gpio-keys {
  31                 compatible = "gpio-keys";
  32                 autorepeat;
  33                 pinctrl-names = "default";
  34                 pinctrl-0 = <&pwrbtn>;
  35
  36                 power {
  37                         debounce-interval = <100>;
  38                         gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
  39                         label = "GPIO Key Power";
  40                         linux,code = <KEY_POWER>;
  41                         wakeup-source;
  42                 };
  43         };
  44
  45         ir-receiver {
  46                 compatible = "gpio-ir-receiver";
  47                 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
  48                 pinctrl-0 = <&ir_int>;
  49                 pinctrl-names = "default";
  50         };
  51
  52         leds {
  53                 compatible = "gpio-leds";
  54                 pinctrl-names = "default";
  55                 pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
  56
  57                 work_led: led-0 {
  58                         label = "work";
  59                         default-state = "on";
  60                         gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
  61                 };
  62
  63                 diy_led: led-1 {
  64                         label = "diy";
  65                         default-state = "off";
  66                         gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
  67                 };
  68         };
  69
  70         fan: pwm-fan {
  71                 compatible = "pwm-fan";
  72                 #cooling-cells = <2>;
  73                 fan-supply = <&vcc12v_dcin>;
  74                 pwms = <&pwm1 0 50000 0>;
  75         };
  76
  77         sdio_pwrseq: sdio-pwrseq {
  78                 compatible = "mmc-pwrseq-simple";
  79                 clocks = <&rk808 1>;
  80                 clock-names = "ext_clock";
  81                 pinctrl-names = "default";
  82                 pinctrl-0 = <&wifi_enable_h>;
  83                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
  84         };
  85
  86         sound {
  87                 compatible = "audio-graph-card";
  88                 label = "Analog";
  89                 dais = <&i2s1_p0>;
  90         };
  91
  92         sound-dit {
  93                 compatible = "audio-graph-card";
  94                 label = "SPDIF";
  95                 dais = <&spdif_p0>;
  96         };
  97
  98         spdif-dit {
  99                 compatible = "linux,spdif-dit";
 100                 #sound-dai-cells = <0>;
 101
 102                 port {
 103                         dit_p0_0: endpoint {
 104                                 remote-endpoint = <&spdif_p0_0>;
 105                         };
 106                 };
 107         };
 108
 109         vcc12v_dcin: vcc12v-dcin {
 110                 compatible = "regulator-fixed";
 111                 regulator-name = "vcc12v_dcin";
 112                 regulator-always-on;
 113                 regulator-boot-on;
 114                 regulator-min-microvolt = <12000000>;
 115                 regulator-max-microvolt = <12000000>;
 116         };
 117
 118         /* switched by pmic_sleep */
 119         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 120                 compatible = "regulator-fixed";
 121                 regulator-name = "vcc1v8_s3";
 122                 regulator-always-on;
 123                 regulator-boot-on;
 124                 regulator-min-microvolt = <1800000>;
 125                 regulator-max-microvolt = <1800000>;
 126                 vin-supply = <&vcc_1v8>;
 127         };
 128
 129         /* micro SD card power */
 130         vcc3v0_sd: vcc3v0-sd {
 131                 compatible = "regulator-fixed";
 132                 enable-active-high;
 133                 gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
 134                 pinctrl-names = "default";
 135                 pinctrl-0 = <&sdmmc0_pwr_h>;
 136                 regulator-name = "vcc3v0_sd";
 137                 regulator-always-on;
 138                 regulator-min-microvolt = <3000000>;
 139                 regulator-max-microvolt = <3000000>;
 140                 vin-supply = <&vcc3v3_sys>;
 141
 142                 regulator-state-mem {
 143                         regulator-off-in-suspend;
 144                 };
 145         };
 146
 147         vcc3v3_pcie: vcc3v3-pcie-regulator {
 148                 compatible = "regulator-fixed";
 149                 enable-active-high;
 150                 gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
 151                 pinctrl-names = "default";
 152                 pinctrl-0 = <&pcie_pwr_en>;
 153                 regulator-name = "vcc3v3_pcie";
 154                 regulator-always-on;
 155                 regulator-boot-on;
 156                 vin-supply = <&vcc12v_dcin>;
 157         };
 158
 159         vcc3v3_sys: vcc3v3-sys {
 160                 compatible = "regulator-fixed";
 161                 regulator-name = "vcc3v3_sys";
 162                 regulator-always-on;
 163                 regulator-boot-on;
 164                 regulator-min-microvolt = <3300000>;
 165                 regulator-max-microvolt = <3300000>;
 166                 vin-supply = <&vcc5v0_sys>;
 167         };
 168
 169         /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
 170         vcc5v0_host: vcc5v0-host-regulator {
 171                 compatible = "regulator-fixed";
 172                 enable-active-high;
 173                 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
 174                 pinctrl-names = "default";
 175                 pinctrl-0 = <&vcc5v0_host_en>;
 176                 regulator-name = "vcc5v0_host";
 177                 regulator-always-on;
 178                 vin-supply = <&vcc5v0_usb>;
 179         };
 180
 181         vcc5v0_typec: vcc5v0-typec-regulator {
 182                 compatible = "regulator-fixed";
 183                 enable-active-high;
 184                 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
 185                 pinctrl-names = "default";
 186                 pinctrl-0 = <&vcc5v0_typec_en>;
 187                 regulator-name = "vcc5v0_typec";
 188                 regulator-always-on;
 189                 vin-supply = <&vcc5v0_usb>;
 190         };
 191
 192         vcc5v0_sys: vcc5v0-sys {
 193                 compatible = "regulator-fixed";
 194                 regulator-name = "vcc5v0_sys";
 195                 regulator-always-on;
 196                 regulator-boot-on;
 197                 regulator-min-microvolt = <5000000>;
 198                 regulator-max-microvolt = <5000000>;
 199                 vin-supply = <&vcc12v_dcin>;
 200         };
 201
 202         vcc5v0_usb: vcc5v0-usb {
 203                 compatible = "regulator-fixed";
 204                 regulator-name = "vcc5v0_usb";
 205                 regulator-always-on;
 206                 regulator-boot-on;
 207                 regulator-min-microvolt = <5000000>;
 208                 regulator-max-microvolt = <5000000>;
 209                 vin-supply = <&vcc12v_dcin>;
 210         };
 211
 212         vdd_log: vdd-log {
 213                 compatible = "pwm-regulator";
 214                 pwms = <&pwm2 0 25000 1>;
 215                 regulator-name = "vdd_log";
 216                 regulator-always-on;
 217                 regulator-boot-on;
 218                 regulator-min-microvolt = <800000>;
 219                 regulator-max-microvolt = <1700000>;
 220                 vin-supply = <&vcc5v0_sys>;
 221         };
 222 };
 223
 224 &cpu_l0 {
 225         cpu-supply = <&vdd_cpu_l>;
 226 };
 227
 228 &cpu_l1 {
 229         cpu-supply = <&vdd_cpu_l>;
 230 };
 231
 232 &cpu_l2 {
 233         cpu-supply = <&vdd_cpu_l>;
 234 };
 235
 236 &cpu_l3 {
 237         cpu-supply = <&vdd_cpu_l>;
 238 };
 239
 240 &cpu_b0 {
 241         cpu-supply = <&vdd_cpu_b>;
 242 };
 243
 244 &cpu_b1 {
 245         cpu-supply = <&vdd_cpu_b>;
 246 };
 247
 248 &emmc_phy {
 249         status = "okay";
 250 };
 251
 252 &gmac {
 253         assigned-clocks = <&cru SCLK_RMII_SRC>;
 254         assigned-clock-parents = <&clkin_gmac>;
 255         clock_in_out = "input";
 256         phy-supply = <&vcc_lan>;
 257         phy-mode = "rgmii";
 258         pinctrl-names = "default";
 259         pinctrl-0 = <&rgmii_pins>;
 260         snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 261         snps,reset-active-low;
 262         snps,reset-delays-us = <0 10000 50000>;
 263         tx_delay = <0x28>;
 264         rx_delay = <0x11>;
 265         status = "okay";
 266 };
 267
 268 &hdmi {
 269         ddc-i2c-bus = <&i2c3>;
 270         pinctrl-names = "default";
 271         pinctrl-0 = <&hdmi_cec>;
 272         status = "okay";
 273 };
 274
 275 &hdmi_sound {
 276         status = "okay";
 277 };
 278
 279 &gpu {
 280         mali-supply = <&vdd_gpu>;
 281         status = "okay";
 282 };
 283
 284 &i2c0 {
 285         clock-frequency = <400000>;
 286         i2c-scl-rising-time-ns = <168>;
 287         i2c-scl-falling-time-ns = <4>;
 288         status = "okay";
 289
 290         rk808: pmic@1b {
 291                 compatible = "rockchip,rk808";
 292                 reg = <0x1b>;
 293                 interrupt-parent = <&gpio3>;
 294                 interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 295                 #clock-cells = <1>;
 296                 clock-output-names = "xin32k", "rk808-clkout2";
 297                 pinctrl-names = "default";
 298                 pinctrl-0 = <&pmic_int_l>;
 299                 rockchip,system-power-controller;
 300                 wakeup-source;
 301
 302                 vcc1-supply = <&vcc5v0_sys>;
 303                 vcc2-supply = <&vcc5v0_sys>;
 304                 vcc3-supply = <&vcc5v0_sys>;
 305                 vcc4-supply = <&vcc5v0_sys>;
 306                 vcc6-supply = <&vcc5v0_sys>;
 307                 vcc7-supply = <&vcc5v0_sys>;
 308                 vcc8-supply = <&vcc3v3_sys>;
 309                 vcc9-supply = <&vcc5v0_sys>;
 310                 vcc10-supply = <&vcc5v0_sys>;
 311                 vcc11-supply = <&vcc5v0_sys>;
 312                 vcc12-supply = <&vcc3v3_sys>;
 313                 vddio-supply = <&vcca_1v8>;
 314
 315                 regulators {
 316                         vdd_center: DCDC_REG1 {
 317                                 regulator-name = "vdd_center";
 318                                 regulator-always-on;
 319                                 regulator-boot-on;
 320                                 regulator-min-microvolt = <750000>;
 321                                 regulator-max-microvolt = <1350000>;
 322                                 regulator-ramp-delay = <6001>;
 323                                 regulator-state-mem {
 324                                         regulator-off-in-suspend;
 325                                 };
 326                         };
 327
 328                         vdd_cpu_l: DCDC_REG2 {
 329                                 regulator-name = "vdd_cpu_l";
 330                                 regulator-always-on;
 331                                 regulator-boot-on;
 332                                 regulator-min-microvolt = <750000>;
 333                                 regulator-max-microvolt = <1350000>;
 334                                 regulator-ramp-delay = <6001>;
 335                                 regulator-state-mem {
 336                                         regulator-off-in-suspend;
 337                                 };
 338                         };
 339
 340                         vcc_ddr: DCDC_REG3 {
 341                                 regulator-name = "vcc_ddr";
 342                                 regulator-always-on;
 343                                 regulator-boot-on;
 344                                 regulator-state-mem {
 345                                         regulator-on-in-suspend;
 346                                 };
 347                         };
 348
 349                         vcc_1v8: DCDC_REG4 {
 350                                 regulator-name = "vcc_1v8";
 351                                 regulator-always-on;
 352                                 regulator-boot-on;
 353                                 regulator-min-microvolt = <1800000>;
 354                                 regulator-max-microvolt = <1800000>;
 355                                 regulator-state-mem {
 356                                         regulator-on-in-suspend;
 357                                         regulator-suspend-microvolt = <1800000>;
 358                                 };
 359                         };
 360
 361                         vcc1v8_dvp: LDO_REG1 {
 362                                 regulator-name = "vcc1v8_dvp";
 363                                 regulator-always-on;
 364                                 regulator-boot-on;
 365                                 regulator-min-microvolt = <1800000>;
 366                                 regulator-max-microvolt = <1800000>;
 367                                 regulator-state-mem {
 368                                         regulator-off-in-suspend;
 369                                 };
 370                         };
 371
 372                         vcc3v0_touch: LDO_REG2 {
 373                                 regulator-name = "vcc3v0_touch";
 374                                 regulator-always-on;
 375                                 regulator-boot-on;
 376                                 regulator-min-microvolt = <3000000>;
 377                                 regulator-max-microvolt = <3000000>;
 378                                 regulator-state-mem {
 379                                         regulator-off-in-suspend;
 380                                 };
 381                         };
 382
 383                         vcca_1v8: LDO_REG3 {
 384                                 regulator-name = "vcca_1v8";
 385                                 regulator-always-on;
 386                                 regulator-boot-on;
 387                                 regulator-min-microvolt = <1800000>;
 388                                 regulator-max-microvolt = <1800000>;
 389                                 regulator-state-mem {
 390                                         regulator-on-in-suspend;
 391                                         regulator-suspend-microvolt = <1800000>;
 392                                 };
 393                         };
 394
 395                         vcc_sdio: LDO_REG4 {
 396                                 regulator-name = "vcc_sdio";
 397                                 regulator-always-on;
 398                                 regulator-boot-on;
 399                                 regulator-min-microvolt = <1800000>;
 400                                 regulator-max-microvolt = <3000000>;
 401                                 regulator-state-mem {
 402                                         regulator-on-in-suspend;
 403                                         regulator-suspend-microvolt = <3000000>;
 404                                 };
 405                         };
 406
 407                         vcca3v0_codec: LDO_REG5 {
 408                                 regulator-name = "vcca3v0_codec";
 409                                 regulator-always-on;
 410                                 regulator-boot-on;
 411                                 regulator-min-microvolt = <3000000>;
 412                                 regulator-max-microvolt = <3000000>;
 413                                 regulator-state-mem {
 414                                         regulator-off-in-suspend;
 415                                 };
 416                         };
 417
 418                         vcc_1v5: LDO_REG6 {
 419                                 regulator-name = "vcc_1v5";
 420                                 regulator-always-on;
 421                                 regulator-boot-on;
 422                                 regulator-min-microvolt = <1500000>;
 423                                 regulator-max-microvolt = <1500000>;
 424                                 regulator-state-mem {
 425                                         regulator-on-in-suspend;
 426                                         regulator-suspend-microvolt = <1500000>;
 427                                 };
 428                         };
 429
 430                         vcca1v8_codec: LDO_REG7 {
 431                                 regulator-name = "vcca1v8_codec";
 432                                 regulator-always-on;
 433                                 regulator-boot-on;
 434                                 regulator-min-microvolt = <1800000>;
 435                                 regulator-max-microvolt = <1800000>;
 436                                 regulator-state-mem {
 437                                         regulator-off-in-suspend;
 438                                 };
 439                         };
 440
 441                         vcc_3v0: LDO_REG8 {
 442                                 regulator-name = "vcc_3v0";
 443                                 regulator-always-on;
 444                                 regulator-boot-on;
 445                                 regulator-min-microvolt = <3000000>;
 446                                 regulator-max-microvolt = <3000000>;
 447                                 regulator-state-mem {
 448                                         regulator-on-in-suspend;
 449                                         regulator-suspend-microvolt = <3000000>;
 450                                 };
 451                         };
 452
 453                         vcc3v3_s3: vcc_lan: SWITCH_REG1 {
 454                                 regulator-name = "vcc3v3_s3";
 455                                 regulator-always-on;
 456                                 regulator-boot-on;
 457                                 regulator-state-mem {
 458                                         regulator-off-in-suspend;
 459                                 };
 460                         };
 461
 462                         vcc3v3_s0: SWITCH_REG2 {
 463                                 regulator-name = "vcc3v3_s0";
 464                                 regulator-always-on;
 465                                 regulator-boot-on;
 466                                 regulator-state-mem {
 467                                         regulator-off-in-suspend;
 468                                 };
 469                         };
 470                 };
 471         };
 472
 473         vdd_cpu_b: regulator@40 {
 474                 compatible = "silergy,syr827";
 475                 reg = <0x40>;
 476                 fcs,suspend-voltage-selector = <1>;
 477                 pinctrl-names = "default";
 478                 pinctrl-0 = <&vsel1_pin>;
 479                 regulator-name = "vdd_cpu_b";
 480                 regulator-min-microvolt = <712500>;
 481                 regulator-max-microvolt = <1500000>;
 482                 regulator-ramp-delay = <1000>;
 483                 regulator-always-on;
 484                 regulator-boot-on;
 485                 vin-supply = <&vcc5v0_sys>;
 486
 487                 regulator-state-mem {
 488                         regulator-off-in-suspend;
 489                 };
 490         };
 491
 492         vdd_gpu: regulator@41 {
 493                 compatible = "silergy,syr828";
 494                 reg = <0x41>;
 495                 fcs,suspend-voltage-selector = <1>;
 496                 pinctrl-names = "default";
 497                 pinctrl-0 = <&vsel2_pin>;
 498                 regulator-name = "vdd_gpu";
 499                 regulator-min-microvolt = <712500>;
 500                 regulator-max-microvolt = <1500000>;
 501                 regulator-ramp-delay = <1000>;
 502                 regulator-always-on;
 503                 regulator-boot-on;
 504                 vin-supply = <&vcc5v0_sys>;
 505
 506                 regulator-state-mem {
 507                         regulator-off-in-suspend;
 508                 };
 509         };
 510 };
 511
 512 &i2c1 {
 513         i2c-scl-rising-time-ns = <300>;
 514         i2c-scl-falling-time-ns = <15>;
 515         status = "okay";
 516 };
 517
 518 &i2c3 {
 519         i2c-scl-rising-time-ns = <450>;
 520         i2c-scl-falling-time-ns = <15>;
 521         status = "okay";
 522 };
 523
 524 &i2c4 {
 525         i2c-scl-rising-time-ns = <600>;
 526         i2c-scl-falling-time-ns = <20>;
 527         status = "okay";
 528
 529         fusb0: typec-portc@22 {
 530                 compatible = "fcs,fusb302";
 531                 reg = <0x22>;
 532                 interrupt-parent = <&gpio1>;
 533                 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 534                 pinctrl-names = "default";
 535                 pinctrl-0 = <&fusb0_int>;
 536                 vbus-supply = <&vcc5v0_typec>;
 537                 status = "okay";
 538         };
 539 };
 540
 541 &i2s0 {
 542         rockchip,playback-channels = <8>;
 543         rockchip,capture-channels = <8>;
 544         status = "okay";
 545 };
 546
 547 &i2s1 {
 548         rockchip,playback-channels = <2>;
 549         rockchip,capture-channels = <2>;
 550         status = "okay";
 551
 552         i2s1_p0: port {
 553                 i2s1_p0_0: endpoint {
 554                         dai-format = "i2s";
 555                         mclk-fs = <256>;
 556                         remote-endpoint = <&es8316_p0_0>;
 557                 };
 558         };
 559 };
 560
 561 &i2s2 {
 562         status = "okay";
 563 };
 564
 565 &io_domains {
 566         status = "okay";
 567
 568         bt656-supply = <&vcc1v8_dvp>;
 569         audio-supply = <&vcc_3v0>;
 570         sdmmc-supply = <&vcc_sdio>;
 571         gpio1830-supply = <&vcc_3v0>;
 572 };
 573
 574 &pcie0 {
 575         ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 576         num-lanes = <4>;
 577         pinctrl-names = "default";
 578         pinctrl-0 = <&pcie_perst>;
 579         vpcie12v-supply = <&vcc12v_dcin>;
 580         vpcie3v3-supply = <&vcc3v3_pcie>;
 581         status = "okay";
 582 };
 583
 584 &pcie_phy {
 585         status = "okay";
 586 };
 587
 588 &pmu_io_domains {
 589         pmu1830-supply = <&vcc_3v0>;
 590         status = "okay";
 591 };
 592
 593 &pinctrl {
 594         bt {
 595                 bt_enable_h: bt-enable-h {
 596                         rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 597                 };
 598
 599                 bt_host_wake_l: bt-host-wake-l {
 600                         rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
 601                 };
 602
 603                 bt_wake_l: bt-wake-l {
 604                         rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 605                 };
 606         };
 607
 608         buttons {
 609                 pwrbtn: pwrbtn {
 610                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 611                 };
 612         };
 613
 614         fusb302x {
 615                 fusb0_int: fusb0-int {
 616                         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 617                 };
 618         };
 619
 620         ir {
 621                 ir_int: ir-int {
 622                         rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 623                 };
 624         };
 625
 626         leds {
 627                 work_led_pin: work-led-pin {
 628                         rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 629                 };
 630
 631                 diy_led_pin: diy-led-pin {
 632                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 633                 };
 634         };
 635
 636         pcie {
 637                 pcie_perst: pcie-perst {
 638                         rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 639                 };
 640
 641                 pcie_pwr_en: pcie-pwr-en {
 642                         rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 643                 };
 644         };
 645
 646         pmic {
 647                 pmic_int_l: pmic-int-l {
 648                         rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 649                 };
 650
 651                 vsel1_pin: vsel1-pin {
 652                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 653                 };
 654
 655                 vsel2_pin: vsel2-pin {
 656                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 657                 };
 658         };
 659
 660         sdcard {
 661                 sdmmc0_pwr_h: sdmmc0-pwr-h {
 662                         rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 663                 };
 664
 665         };
 666
 667         sdio-pwrseq {
 668                 wifi_enable_h: wifi-enable-h {
 669                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 670                 };
 671         };
 672
 673         usb-typec {
 674                 vcc5v0_typec_en: vcc5v0_typec_en {
 675                         rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 676                 };
 677         };
 678
 679         usb2 {
 680                 vcc5v0_host_en: vcc5v0-host-en {
 681                         rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 682                 };
 683         };
 684 };
 685
 686 &pwm0 {
 687         status = "okay";
 688 };
 689
 690 &pwm1 {
 691         status = "okay";
 692 };
 693
 694 &pwm2 {
 695         status = "okay";
 696 };
 697
 698 &saradc {
 699         vref-supply = <&vcca1v8_s3>;
 700         status = "okay";
 701 };
 702
 703 &sdio0 {
 704         bus-width = <4>;
 705         cap-sd-highspeed;
 706         cap-sdio-irq;
 707         disable-wp;
 708         keep-power-in-suspend;
 709         mmc-pwrseq = <&sdio_pwrseq>;
 710         non-removable;
 711         pinctrl-names = "default";
 712         pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 713         sd-uhs-sdr104;
 714         status = "okay";
 715 };
 716
 717 &sdmmc {
 718         bus-width = <4>;
 719         cap-sd-highspeed;
 720         cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 721         disable-wp;
 722         max-frequency = <150000000>;
 723         pinctrl-names = "default";
 724         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
 725         vmmc-supply = <&vcc3v0_sd>;
 726         vqmmc-supply = <&vcc_sdio>;
 727         status = "okay";
 728 };
 729
 730 &sdhci {
 731         bus-width = <8>;
 732         mmc-hs200-1_8v;
 733         non-removable;
 734         status = "okay";
 735 };
 736
 737 &spdif {
 738         pinctrl-0 = <&spdif_bus_1>;
 739
 740         spdif_p0: port {
 741                 spdif_p0_0: endpoint {
 742                         remote-endpoint = <&dit_p0_0>;
 743                 };
 744         };
 745 };
 746
 747 &spi1 {
 748         status = "okay";
 749
 750         flash@0 {
 751                 compatible = "jedec,spi-nor";
 752                 reg = <0>;
 753                 spi-max-frequency = <10000000>;
 754         };
 755 };
 756
 757 &tcphy0 {
 758         status = "okay";
 759 };
 760
 761 &tcphy1 {
 762         status = "okay";
 763 };
 764
 765 &tsadc {
 766         /* tshut mode 0:CRU 1:GPIO */
 767         rockchip,hw-tshut-mode = <1>;
 768         /* tshut polarity 0:LOW 1:HIGH */
 769         rockchip,hw-tshut-polarity = <1>;
 770         status = "okay";
 771 };
 772
 773 &u2phy0 {
 774         status = "okay";
 775
 776         u2phy0_otg: otg-port {
 777                 status = "okay";
 778         };
 779
 780         u2phy0_host: host-port {
 781                 phy-supply = <&vcc5v0_host>;
 782                 status = "okay";
 783         };
 784 };
 785
 786 &u2phy1 {
 787         status = "okay";
 788
 789         u2phy1_otg: otg-port {
 790                 status = "okay";
 791         };
 792
 793         u2phy1_host: host-port {
 794                 phy-supply = <&vcc5v0_host>;
 795                 status = "okay";
 796         };
 797 };
 798
 799 &uart0 {
 800         pinctrl-names = "default";
 801         pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 802         status = "okay";
 803
 804         bluetooth {
 805                 compatible = "brcm,bcm43438-bt";
 806                 clocks = <&rk808 1>;
 807                 clock-names = "lpo";
 808                 device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 809                 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 810                 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
 811                 pinctrl-names = "default";
 812                 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
 813                 vbat-supply = <&vcc3v3_sys>;
 814                 vddio-supply = <&vcc_1v8>;
 815         };
 816 };
 817
 818 &uart2 {
 819         status = "okay";
 820 };
 821
 822 &usb_host0_ehci {
 823         status = "okay";
 824 };
 825
 826 &usb_host0_ohci {
 827         status = "okay";
 828 };
 829
 830 &usb_host1_ehci {
 831         status = "okay";
 832 };
 833
 834 &usb_host1_ohci {
 835         status = "okay";
 836 };
 837
 838 &usbdrd3_0 {
 839         status = "okay";
 840 };
 841
 842 &usbdrd_dwc3_0 {
 843         status = "okay";
 844         dr_mode = "host";
 845 };
 846
 847 &usbdrd3_1 {
 848         status = "okay";
 849 };
 850
 851 &usbdrd_dwc3_1 {
 852         status = "okay";
 853         dr_mode = "host";
 854 };
 855
 856 &vopb {
 857         status = "okay";
 858 };
 859
 860 &vopb_mmu {
 861         status = "okay";
 862 };
 863
 864 &vopl {
 865         status = "okay";
 866 };
 867
 868 &vopl_mmu {
 869         status = "okay";
 870 };