arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
   4  */
   5
   6 /dts-v1/;
   7 #include "rk3399-puma.dtsi"
   8
   9 / {
  10         model = "Theobroma Systems RK3399-Q7 SoM";
  11         compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
  12
  13         aliases {
  14                 mmc1 = &sdmmc;
  15         };
  16
  17         chosen {
  18                 stdout-path = "serial0:115200n8";
  19         };
  20
  21         leds {
  22                 pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
  23
  24                 sd_card_led: led-1 {
  25                         label = "sd_card_led";
  26                         gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
  27                         linux,default-trigger = "mmc0";
  28                 };
  29         };
  30
  31         i2s0-sound {
  32                 compatible = "simple-audio-card";
  33                 simple-audio-card,format = "i2s";
  34                 simple-audio-card,name = "Haikou,I2S-codec";
  35                 simple-audio-card,mclk-fs = <512>;
  36
  37                 simple-audio-card,codec {
  38                         clocks = <&sgtl5000_clk>;
  39                         sound-dai = <&sgtl5000>;
  40                 };
  41
  42                 simple-audio-card,cpu {
  43                         bitclock-master;
  44                         frame-master;
  45                         sound-dai = <&i2s0>;
  46                 };
  47         };
  48
  49         sgtl5000_clk: sgtl5000-oscillator  {
  50                         compatible = "fixed-clock";
  51                         #clock-cells = <0>;
  52                         clock-frequency  = <24576000>;
  53         };
  54
  55         dc_12v: dc-12v {
  56                 compatible = "regulator-fixed";
  57                 regulator-name = "dc_12v";
  58                 regulator-always-on;
  59                 regulator-boot-on;
  60                 regulator-min-microvolt = <12000000>;
  61                 regulator-max-microvolt = <12000000>;
  62         };
  63
  64         vcc3v3_baseboard: vcc3v3-baseboard {
  65                 compatible = "regulator-fixed";
  66                 regulator-name = "vcc3v3_baseboard";
  67                 regulator-always-on;
  68                 regulator-boot-on;
  69                 regulator-min-microvolt = <3300000>;
  70                 regulator-max-microvolt = <3300000>;
  71                 vin-supply = <&dc_12v>;
  72         };
  73
  74         vcc5v0_baseboard: vcc5v0-baseboard {
  75                 compatible = "regulator-fixed";
  76                 regulator-name = "vcc5v0_baseboard";
  77                 regulator-always-on;
  78                 regulator-boot-on;
  79                 regulator-min-microvolt = <5000000>;
  80                 regulator-max-microvolt = <5000000>;
  81                 vin-supply = <&dc_12v>;
  82         };
  83
  84         vcc5v0_otg: vcc5v0-otg-regulator {
  85                 compatible = "regulator-fixed";
  86                 enable-active-high;
  87                 gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
  88                 pinctrl-names = "default";
  89                 pinctrl-0 = <&otg_vbus_drv>;
  90                 regulator-name = "vcc5v0_otg";
  91                 regulator-always-on;
  92         };
  93
  94         vdda_codec: vdda-codec {
  95                 compatible = "regulator-fixed";
  96                 regulator-name = "vdda_codec";
  97                 regulator-boot-on;
  98                 regulator-min-microvolt = <3300000>;
  99                 regulator-max-microvolt = <3300000>;
 100                 vin-supply = <&vcc5v0_baseboard>;
 101         };
 102
 103         vddd_codec: vddd-codec {
 104                 compatible = "regulator-fixed";
 105                 regulator-name = "vddd_codec";
 106                 regulator-boot-on;
 107                 regulator-min-microvolt = <1600000>;
 108                 regulator-max-microvolt = <1600000>;
 109                 vin-supply = <&vcc5v0_baseboard>;
 110         };
 111 };
 112
 113 &hdmi {
 114         ddc-i2c-bus = <&i2c3>;
 115         status = "okay";
 116 };
 117
 118 &i2c1 {
 119         status = "okay";
 120         clock-frequency = <400000>;
 121 };
 122
 123 &i2c2 {
 124         status = "okay";
 125         clock-frequency = <400000>;
 126 };
 127
 128 &i2c3 {
 129         i2c-scl-rising-time-ns = <450>;
 130         i2c-scl-falling-time-ns = <15>;
 131         status = "okay";
 132 };
 133
 134 &i2c4 {
 135         status = "okay";
 136         clock-frequency = <400000>;
 137
 138         sgtl5000: codec@a {
 139                 compatible = "fsl,sgtl5000";
 140                 reg = <0x0a>;
 141                 clocks = <&sgtl5000_clk>;
 142                 #sound-dai-cells = <0>;
 143                 VDDA-supply = <&vdda_codec>;
 144                 VDDIO-supply = <&vdda_codec>;
 145                 VDDD-supply = <&vddd_codec>;
 146                 status = "okay";
 147         };
 148 };
 149
 150 &i2c6 {
 151         status = "okay";
 152         clock-frequency = <400000>;
 153 };
 154
 155 &pcie_phy {
 156         status = "okay";
 157 };
 158
 159 &pcie0 {
 160         ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
 161         num-lanes = <4>;
 162         pinctrl-names = "default";
 163         pinctrl-0 = <&pcie_clkreqn_cpm>;
 164         status = "okay";
 165 };
 166
 167 &pinctrl {
 168         pinctrl-names = "default";
 169         pinctrl-0 = <&haikou_pin_hog>;
 170
 171         hog {
 172                 haikou_pin_hog: haikou-pin-hog {
 173                         rockchip,pins =
 174                           /* LID_BTN */
 175                           <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
 176                           /* BATLOW# */
 177                           <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
 178                           /* SLP_BTN# */
 179                           <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
 180                           /* BIOS_DISABLE# */
 181                           <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
 182                 };
 183         };
 184
 185         leds {
 186                 sd_card_led_pin: sd-card-led-pin {
 187                         rockchip,pins =
 188                           <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 189                 };
 190         };
 191
 192         usb2 {
 193                 otg_vbus_drv: otg-vbus-drv {
 194                         rockchip,pins =
 195                           <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 196                 };
 197         };
 198 };
 199
 200 &pwm0 {
 201         status = "okay";
 202 };
 203
 204 &sdmmc {
 205         bus-width = <4>;
 206         cap-mmc-highspeed;
 207         cap-sd-highspeed;
 208         cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 209         disable-wp;
 210         max-frequency = <150000000>;
 211         pinctrl-names = "default";
 212         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 213         vmmc-supply = <&vcc3v3_baseboard>;
 214         status = "okay";
 215 };
 216
 217 &spi5 {
 218         status = "okay";
 219 };
 220
 221 &tcphy0 {
 222         status = "okay";
 223 };
 224
 225 &u2phy0 {
 226         status = "okay";
 227 };
 228
 229 &usbdrd3_0 {
 230         status = "okay";
 231 };
 232
 233 &usbdrd_dwc3_0 {
 234         dr_mode = "otg";
 235         status = "okay";
 236 };
 237
 238 &u2phy0_host {
 239         phy-supply = <&vcc5v0_otg>;
 240         status = "okay";
 241 };
 242
 243 &uart0 {
 244         pinctrl-names = "default";
 245         pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 246         status = "okay";
 247 };
 248
 249 &uart2 {
 250         status = "okay";
 251 };
 252
 253 &usb_host0_ehci {
 254         status = "okay";
 255 };
 256
 257 &usb_host0_ohci {
 258         status = "okay";
 259 };
 260
 261 &vopb {
 262         status = "okay";
 263 };
 264
 265 &vopb_mmu {
 266         status = "okay";
 267 };
 268
 269 &vopl {
 270         status = "okay";
 271 };
 272
 273 &vopl_mmu {
 274         status = "okay";
 275 };