arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Google Gru-scarlet board device tree source
   4  *
   5  * Copyright 2018 Google, Inc
   6  */
   7
   8 #include "rk3399-gru.dtsi"
   9
  10 /{
  11         chassis-type = "tablet";
  12
  13         /* Power tree */
  14
  15         /* ppvar_sys children, sorted by name */
  16         pp1250_s3: pp1250-s3 {
  17                 compatible = "regulator-fixed";
  18                 regulator-name = "pp1250_s3";
  19
  20                 /* EC turns on w/ pp1250_s3_en; always on for AP */
  21                 regulator-always-on;
  22                 regulator-boot-on;
  23                 regulator-min-microvolt = <1250000>;
  24                 regulator-max-microvolt = <1250000>;
  25
  26                 vin-supply = <&ppvar_sys>;
  27         };
  28
  29         pp1250_cam: pp1250-dvdd {
  30                 compatible = "regulator-fixed";
  31                 regulator-name = "pp1250_dvdd";
  32                 pinctrl-names = "default";
  33                 pinctrl-0 = <&pp1250_cam_en>;
  34
  35                 enable-active-high;
  36                 gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
  37
  38                 /* 740us delay from gpio output high to pp1250 stable,
  39                  * rounding up to 1ms for safety.
  40                  */
  41                 startup-delay-us = <1000>;
  42                 vin-supply = <&pp1250_s3>;
  43         };
  44
  45         pp900_s0: pp900-s0 {
  46                 compatible = "regulator-fixed";
  47                 regulator-name = "pp900_s0";
  48
  49                 /* EC turns on w/ pp900_s0_en; always on for AP */
  50                 regulator-always-on;
  51                 regulator-boot-on;
  52                 regulator-min-microvolt = <900000>;
  53                 regulator-max-microvolt = <900000>;
  54
  55                 vin-supply = <&ppvar_sys>;
  56         };
  57
  58         ppvarn_lcd: ppvarn-lcd {
  59                 compatible = "regulator-fixed";
  60                 regulator-name = "ppvarn_lcd";
  61                 pinctrl-names = "default";
  62                 pinctrl-0 = <&ppvarn_lcd_en>;
  63
  64                 enable-active-high;
  65                 gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
  66                 vin-supply = <&ppvar_sys>;
  67         };
  68
  69         ppvarp_lcd: ppvarp-lcd {
  70                 compatible = "regulator-fixed";
  71                 regulator-name = "ppvarp_lcd";
  72                 pinctrl-names = "default";
  73                 pinctrl-0 = <&ppvarp_lcd_en>;
  74
  75                 enable-active-high;
  76                 gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
  77                 vin-supply = <&ppvar_sys>;
  78         };
  79
  80         /* pp1800 children, sorted by name */
  81         pp900_s3: pp900-s3 {
  82                 compatible = "regulator-fixed";
  83                 regulator-name = "pp900_s3";
  84
  85                 /* EC turns on w/ pp900_s3_en; always on for AP */
  86                 regulator-always-on;
  87                 regulator-boot-on;
  88                 regulator-min-microvolt = <900000>;
  89                 regulator-max-microvolt = <900000>;
  90
  91                 vin-supply = <&pp1800>;
  92         };
  93
  94         /* EC turns on pp1800_s3_en */
  95         pp1800_s3: pp1800 {
  96         };
  97
  98         /* pp3300 children, sorted by name */
  99         pp2800_cam: pp2800-avdd {
 100                 compatible = "regulator-fixed";
 101                 regulator-name = "pp2800_avdd";
 102                 pinctrl-names = "default";
 103                 pinctrl-0 = <&pp2800_cam_en>;
 104
 105                 enable-active-high;
 106                 gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 107                 startup-delay-us = <100>;
 108                 vin-supply = <&pp3300>;
 109         };
 110
 111         /* EC turns on pp3300_s0_en */
 112         pp3300_s0: pp3300 {
 113         };
 114
 115         /* EC turns on pp3300_s3_en */
 116         pp3300_s3: pp3300 {
 117         };
 118
 119         /*
 120          * See b/66922012
 121          *
 122          * This is a hack to make sure the Bluetooth part of the QCA6174A
 123          * is reset at boot by toggling BT_EN. At boot BT_EN is first set
 124          * to low when the bt_3v3 regulator is registered (in disabled
 125          * state). The fake regulator is configured as a supply of the
 126          * wlan_3v3 regulator below. When wlan_3v3 is enabled early in
 127          * the boot process it also enables its supply regulator bt_3v3,
 128          * which changes BT_EN to high.
 129          */
 130         bt_3v3: bt-3v3 {
 131                 compatible = "regulator-fixed";
 132                 regulator-name = "bt_3v3";
 133                 pinctrl-names = "default";
 134                 pinctrl-0 = <&bt_en_1v8_l>;
 135
 136                 enable-active-high;
 137                 gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 138                 vin-supply = <&pp3300_s3>;
 139         };
 140
 141         wlan_3v3: wlan-3v3 {
 142                 compatible = "regulator-fixed";
 143                 regulator-name = "wlan_3v3";
 144                 pinctrl-names = "default";
 145                 pinctrl-0 = <&wlan_pd_1v8_l>;
 146
 147                 /*
 148                  * The WL_EN pin is driven low when the regulator is
 149                  * registered, and transitions to high when the PCIe bus
 150                  * is powered up.
 151                  */
 152                 enable-active-high;
 153                 gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 154
 155                 /*
 156                  * Require minimum 10ms from power-on (e.g., PD#) to init PCIe.
 157                  * TODO (b/64444991): how long to assert PD#?
 158                  */
 159                 regulator-enable-ramp-delay = <10000>;
 160                 /* See bt_3v3 hack above */
 161                 vin-supply = <&bt_3v3>;
 162         };
 163
 164         backlight: backlight {
 165                 compatible = "pwm-backlight";
 166                 enable-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 167                 pinctrl-names = "default";
 168                 pinctrl-0 = <&bl_en>;
 169                 pwms = <&pwm1 0 1000000 0>;
 170                 pwm-delay-us = <10000>;
 171         };
 172
 173         dmic: dmic {
 174                 compatible = "dmic-codec";
 175                 dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 176                 pinctrl-names = "default";
 177                 pinctrl-0 = <&dmic_en>;
 178                 wakeup-delay-ms = <250>;
 179         };
 180
 181         gpio_keys: gpio-keys {
 182                 compatible = "gpio-keys";
 183                 pinctrl-names = "default";
 184                 pinctrl-0 = <&pen_eject_odl>;
 185
 186                 pen-insert {
 187                         label = "Pen Insert";
 188                         /* Insert = low, eject = high */
 189                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 190                         linux,code = <SW_PEN_INSERTED>;
 191                         linux,input-type = <EV_SW>;
 192                         wakeup-source;
 193                 };
 194         };
 195 };
 196
 197 /* pp900_s0 aliases */
 198 pp900_ddrpll_ap: &pp900_s0 {
 199 };
 200 pp900_pcie: &pp900_s0 {
 201 };
 202 pp900_usb: &pp900_s0 {
 203 };
 204
 205 /* pp900_s3 aliases */
 206 pp900_emmcpll: &pp900_s3 {
 207 };
 208
 209 /* EC turns on; alias for pp1800_s0 */
 210 pp1800_pcie: &pp1800_s0 {
 211 };
 212
 213 /* On scarlet PPVAR(big_cpu, lit_cpu, gpu) need to adjust voltage ranges */
 214 &ppvar_bigcpu {
 215         ctrl-voltage-range = <800074 1299226>;
 216         regulator-min-microvolt = <800074>;
 217         regulator-max-microvolt = <1299226>;
 218 };
 219
 220 &ppvar_bigcpu_pwm {
 221         /* On scarlet ppvar big cpu use pwm3 */
 222         pwms = <&pwm3 0 3337 0>;
 223         regulator-min-microvolt = <800074>;
 224         regulator-max-microvolt = <1299226>;
 225 };
 226
 227 &ppvar_litcpu {
 228         ctrl-voltage-range = <802122 1199620>;
 229         regulator-min-microvolt = <802122>;
 230         regulator-max-microvolt = <1199620>;
 231 };
 232
 233 &ppvar_litcpu_pwm {
 234         regulator-min-microvolt = <802122>;
 235         regulator-max-microvolt = <1199620>;
 236 };
 237
 238 &ppvar_gpu {
 239         ctrl-voltage-range = <799600 1099600>;
 240         regulator-min-microvolt = <799600>;
 241         regulator-max-microvolt = <1099600>;
 242 };
 243
 244 &ppvar_gpu_pwm {
 245         regulator-min-microvolt = <799600>;
 246         regulator-max-microvolt = <1099600>;
 247 };
 248
 249 &ppvar_sd_card_io {
 250         states = <1800000 0x0>, <3300000 0x1>;
 251         regulator-max-microvolt = <3300000>;
 252 };
 253
 254 &pp3000_sd_slot {
 255         vin-supply = <&pp3300>;
 256 };
 257
 258 ap_i2c_dig: &i2c2 {
 259         status = "okay";
 260
 261         clock-frequency = <400000>;
 262
 263         /* These are relatively safe rise/fall times. */
 264         i2c-scl-falling-time-ns = <50>;
 265         i2c-scl-rising-time-ns = <300>;
 266
 267         digitizer: digitizer@9 {
 268                 compatible = "hid-over-i2c";
 269                 reg = <0x9>;
 270                 interrupt-parent = <&gpio1>;
 271                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 272                 hid-descr-addr = <0x1>;
 273                 pinctrl-names = "default";
 274                 pinctrl-0 = <&pen_int_odl &pen_reset_l>;
 275         };
 276 };
 277
 278 &ap_i2c_ts {
 279         touchscreen: touchscreen@10 {
 280                 compatible = "elan,ekth3500";
 281                 reg = <0x10>;
 282                 interrupt-parent = <&gpio1>;
 283                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 284                 pinctrl-names = "default";
 285                 pinctrl-0 = <&touch_int_l &touch_reset_l>;
 286                 reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 287         };
 288 };
 289
 290 camera: &i2c7 {
 291         status = "okay";
 292
 293         clock-frequency = <400000>;
 294
 295         /* These are relatively safe rise/fall times; TODO: measure */
 296         i2c-scl-falling-time-ns = <50>;
 297         i2c-scl-rising-time-ns = <300>;
 298
 299         /* 24M mclk is shared between world and user cameras */
 300         pinctrl-0 = <&i2c7_xfer &test_clkout1>;
 301
 302         /* Rear-facing camera */
 303         wcam: camera@36 {
 304                 compatible = "ovti,ov5695";
 305                 reg = <0x36>;
 306                 pinctrl-names = "default";
 307                 pinctrl-0 = <&wcam_rst>;
 308
 309                 clocks = <&cru SCLK_TESTCLKOUT1>;
 310                 clock-names = "xvclk";
 311
 312                 avdd-supply = <&pp2800_cam>;
 313                 dvdd-supply = <&pp1250_cam>;
 314                 dovdd-supply = <&pp1800_s0>;
 315                 reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
 316
 317                 port {
 318                         wcam_out: endpoint {
 319                                 remote-endpoint = <&mipi_in_wcam>;
 320                                 data-lanes = <1 2>;
 321                         };
 322                 };
 323         };
 324
 325         /* Front-facing camera */
 326         ucam: camera@3c {
 327                 compatible = "ovti,ov2685";
 328                 reg = <0x3c>;
 329                 pinctrl-names = "default";
 330                 pinctrl-0 = <&ucam_rst>;
 331
 332                 clocks = <&cru SCLK_TESTCLKOUT1>;
 333                 clock-names = "xvclk";
 334
 335                 avdd-supply = <&pp2800_cam>;
 336                 dovdd-supply = <&pp1800_s0>;
 337                 dvdd-supply = <&pp1800_s0>;
 338                 reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 339
 340                 port {
 341                         ucam_out: endpoint {
 342                                 remote-endpoint = <&mipi_in_ucam>;
 343                                 data-lanes = <1>;
 344                         };
 345                 };
 346         };
 347 };
 348
 349 &cdn_dp {
 350         extcon = <&usbc_extcon0>;
 351         phys = <&tcphy0_dp>;
 352 };
 353
 354 &cpu_alert0 {
 355         temperature = <66000>;
 356 };
 357
 358 &cpu_alert1 {
 359         temperature = <71000>;
 360 };
 361
 362 &cros_ec {
 363         interrupt-parent = <&gpio1>;
 364         interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 365 };
 366
 367 &cru {
 368         assigned-clocks =
 369                 <&cru PLL_GPLL>, <&cru PLL_CPLL>,
 370                 <&cru PLL_NPLL>,
 371                 <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
 372                 <&cru PCLK_PERIHP>,
 373                 <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
 374                 <&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
 375                 <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
 376                 <&cru ACLK_VIO>,
 377                 <&cru ACLK_GIC_PRE>,
 378                 <&cru PCLK_DDR>,
 379                 <&cru ACLK_HDCP>;
 380         assigned-clock-rates =
 381                 <600000000>, <1600000000>,
 382                 <1000000000>,
 383                 <150000000>, <75000000>,
 384                 <37500000>,
 385                 <100000000>, <100000000>,
 386                 <50000000>, <800000000>,
 387                 <100000000>, <50000000>,
 388                 <400000000>,
 389                 <200000000>,
 390                 <200000000>,
 391                 <400000000>;
 392 };
 393
 394 /* The center supply is fixed to .9V on scarlet */
 395 &dmc {
 396         center-supply = <&pp900_s0>;
 397 };
 398
 399 /* We don't need .925 V for 928 MHz on scarlet */
 400 &dmc_opp_table {
 401         opp03 {
 402                 opp-microvolt = <900000>;
 403         };
 404 };
 405
 406 &gpio0 {
 407         gpio-line-names = /* GPIO0 A 0-7 */
 408                           "CLK_32K_AP",
 409                           "EC_IN_RW_OD",
 410                           "SPK_PA_EN",
 411                           "WLAN_PERST_1V8_L",
 412                           "WLAN_PD_1V8_L",
 413                           "WLAN_RF_KILL_1V8_L",
 414                           "BIGCPU_DVS_PWM",
 415                           "SD_CD_L_JTAG_EN",
 416
 417                           /* GPIO0 B 0-5 */
 418                           "BT_EN_BT_RF_KILL_1V8_L",
 419                           "PMUIO2_33_18_L_PP3300_S0_EN",
 420                           "TOUCH_RESET_L",
 421                           "AP_EC_WARM_RESET_REQ",
 422                           "PEN_RESET_L",
 423                           /*
 424                            * AP_FLASH_WP_L is crossystem ABI. Schematics call
 425                            * it AP_FLASH_WP_R_ODL.
 426                            */
 427                           "AP_FLASH_WP_L";
 428 };
 429
 430 &gpio1 {
 431         gpio-line-names = /* GPIO1 A 0-7 */
 432                           "PEN_INT_ODL",
 433                           "PEN_EJECT_ODL",
 434                           "BT_HOST_WAKE_1V8_L",
 435                           "WLAN_HOST_WAKE_1V8_L",
 436                           "TOUCH_INT_ODL",
 437                           "AP_EC_S3_S0_L",
 438                           "AP_EC_OVERTEMP",
 439                           "AP_SPI_FLASH_MISO",
 440
 441                           /* GPIO1 B 0-7 */
 442                           "AP_SPI_FLASH_MOSI_R",
 443                           "AP_SPI_FLASH_CLK_R",
 444                           "AP_SPI_FLASH_CS_L_R",
 445                           "SD_CARD_DET_ODL",
 446                           "",
 447                           "AP_EXPANSION_IO1",
 448                           "AP_EXPANSION_IO2",
 449                           "AP_I2C_DISP_SDA",
 450
 451                           /* GPIO1 C 0-7 */
 452                           "AP_I2C_DISP_SCL",
 453                           "H1_INT_ODL",
 454                           "EC_AP_INT_ODL",
 455                           "LITCPU_DVS_PWM",
 456                           "AP_I2C_AUDIO_SDA",
 457                           "AP_I2C_AUDIO_SCL",
 458                           "AP_EXPANSION_IO3",
 459                           "HEADSET_INT_ODL",
 460
 461                           /* GPIO1 D0 */
 462                           "AP_EXPANSION_IO4";
 463 };
 464
 465 &gpio2 {
 466         gpio-line-names = /* GPIO2 A 0-7 */
 467                           "AP_I2C_PEN_SDA",
 468                           "AP_I2C_PEN_SCL",
 469                           "SD_IO_PWR_EN",
 470                           "UCAM_RST_L",
 471                           "PP1250_CAM_EN",
 472                           "WCAM_RST_L",
 473                           "AP_EXPANSION_IO5",
 474                           "AP_I2C_CAM_SDA",
 475
 476                           /* GPIO2 B 0-7 */
 477                           "AP_I2C_CAM_SCL",
 478                           "AP_H1_SPI_MISO",
 479                           "AP_H1_SPI_MOSI",
 480                           "AP_H1_SPI_CLK",
 481                           "AP_H1_SPI_CS_L",
 482                           "",
 483                           "",
 484                           "",
 485
 486                           /* GPIO2 C 0-7 */
 487                           "UART_EXPANSION_TX_AP_RX",
 488                           "UART_AP_TX_EXPANSION_RX",
 489                           "UART_EXPANSION_RTS_AP_CTS",
 490                           "UART_AP_RTS_EXPANSION_CTS",
 491                           "AP_SPI_EC_MISO",
 492                           "AP_SPI_EC_MOSI",
 493                           "AP_SPI_EC_CLK",
 494                           "AP_SPI_EC_CS_L",
 495
 496                           /* GPIO2 D 0-4 */
 497                           "PP2800_CAM_EN",
 498                           "CLK_24M_CAM",
 499                           "WLAN_PCIE_CLKREQ_1V8_L",
 500                           "",
 501                           "SD_PWR_3000_1800_L";
 502 };
 503
 504 &gpio3 {
 505         gpio-line-names = /* GPIO3 A 0-7 */
 506                           "",
 507                           "",
 508                           "",
 509                           "",
 510                           "",
 511                           "",
 512                           "",
 513                           "",
 514
 515                           /* GPIO3 B 0-7 */
 516                           "",
 517                           "",
 518                           "",
 519                           "",
 520                           "",
 521                           "",
 522                           "",
 523                           "",
 524
 525                           /* GPIO3 C 0-7 */
 526                           "",
 527                           "",
 528                           "",
 529                           "",
 530                           "",
 531                           "",
 532                           "",
 533                           "",
 534
 535                           /* GPIO3 D 0-7 */
 536                           "I2S0_SCLK",
 537                           "I2S0_LRCK_RX",
 538                           "I2S0_LRCK_TX",
 539                           "I2S0_SDI_0",
 540                           "STRAP_LCDBIAS_L",
 541                           "STRAP_FEATURE_1",
 542                           "STRAP_FEATURE_2",
 543                           "I2S0_SDO_0";
 544 };
 545
 546 &gpio4 {
 547         gpio-line-names = /* GPIO4 A 0-7 */
 548                           "I2S_MCLK",
 549                           "AP_I2C_EXPANSION_SDA",
 550                           "AP_I2C_EXPANSION_SCL",
 551                           "DMIC_EN",
 552                           "",
 553                           "",
 554                           "",
 555                           "",
 556
 557                           /* GPIO4 B 0-7 */
 558                           "",
 559                           "",
 560                           "",
 561                           "",
 562                           "",
 563                           "",
 564                           "",
 565                           "",
 566
 567                           /* GPIO4 C 0-7 */
 568                           "AP_I2C_TS_SDA",
 569                           "AP_I2C_TS_SCL",
 570                           "GPU_DVS_PWM",
 571                           "UART_DBG_TX_AP_RX",
 572                           "UART_AP_TX_DBG_RX",
 573                           "BL_EN",
 574                           "BL_PWM",
 575                           "",
 576
 577                           /* GPIO4 D 0-5 */
 578                           "",
 579                           "DISPLAY_RST_L",
 580                           "",
 581                           "PPVARP_LCD_EN",
 582                           "PPVARN_LCD_EN",
 583                           "SD_SLOT_PWR_EN";
 584 };
 585
 586 &i2c_tunnel {
 587         google,remote-bus = <0>;
 588 };
 589
 590 &io_domains {
 591         bt656-supply = <&pp1800_s0>;            /* APIO2_VDD;  2a 2b */
 592         audio-supply = <&pp1800_s0>;            /* APIO5_VDD;  3d 4a */
 593         gpio1830-supply = <&pp1800_s0>;         /* APIO4_VDD;  4c 4d */
 594 };
 595
 596 &isp0 {
 597         status = "okay";
 598
 599         ports {
 600                 port@0 {
 601                         mipi_in_wcam: endpoint@0 {
 602                                 reg = <0>;
 603                                 remote-endpoint = <&wcam_out>;
 604                                 data-lanes = <1 2>;
 605                         };
 606
 607                         mipi_in_ucam: endpoint@1 {
 608                                 reg = <1>;
 609                                 remote-endpoint = <&ucam_out>;
 610                                 data-lanes = <1>;
 611                         };
 612                 };
 613         };
 614 };
 615
 616 &isp0_mmu {
 617         status = "okay";
 618 };
 619
 620 &max98357a {
 621         sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
 622 };
 623
 624 &mipi_dphy_rx0 {
 625         status = "okay";
 626 };
 627
 628 &mipi_dsi {
 629         status = "okay";
 630         clock-master;
 631
 632         ports {
 633                 mipi_out: port@1 {
 634                         reg = <1>;
 635
 636                         mipi_out_panel: endpoint {
 637                                 remote-endpoint = <&mipi_in_panel>;
 638                         };
 639                 };
 640         };
 641
 642         mipi_panel: panel@0 {
 643                 /* 2 different panels are used, compatibles are in dts files */
 644                 reg = <0>;
 645                 backlight = <&backlight>;
 646                 enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
 647                 pinctrl-names = "default";
 648                 pinctrl-0 = <&display_rst_l>;
 649
 650                 ports {
 651                         #address-cells = <1>;
 652                         #size-cells = <0>;
 653
 654                         port@0 {
 655                                 reg = <0>;
 656
 657                                 mipi_in_panel: endpoint {
 658                                         remote-endpoint = <&mipi_out_panel>;
 659                                 };
 660                         };
 661
 662                         port@1 {
 663                                 reg = <1>;
 664
 665                                 mipi1_in_panel: endpoint@1 {
 666                                         remote-endpoint = <&mipi1_out_panel>;
 667                                 };
 668                         };
 669                 };
 670         };
 671 };
 672
 673 &mipi_dsi1 {
 674         status = "okay";
 675
 676         ports {
 677                 mipi1_out: port@1 {
 678                         reg = <1>;
 679
 680                         mipi1_out_panel: endpoint {
 681                                 remote-endpoint = <&mipi1_in_panel>;
 682                         };
 683                 };
 684         };
 685 };
 686
 687 &pcie0 {
 688         ep-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
 689
 690         /* PERST# asserted in S3 */
 691         pcie-reset-suspend = <1>;
 692
 693         vpcie3v3-supply = <&wlan_3v3>;
 694         vpcie1v8-supply = <&pp1800_pcie>;
 695 };
 696
 697 &sdmmc {
 698         cd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 699 };
 700
 701 &sound {
 702         rockchip,codec = <&max98357a &dmic &codec &cdn_dp>;
 703 };
 704
 705 &spi2 {
 706         status = "okay";
 707
 708         cr50@0 {
 709                 compatible = "google,cr50";
 710                 reg = <0>;
 711                 interrupt-parent = <&gpio1>;
 712                 interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 713                 pinctrl-names = "default";
 714                 pinctrl-0 = <&h1_int_od_l>;
 715                 spi-max-frequency = <800000>;
 716         };
 717 };
 718
 719 &usb_host0_ohci {
 720         #address-cells = <1>;
 721         #size-cells = <0>;
 722
 723         qca_bt: bluetooth@1 {
 724                 compatible = "usbcf3,e300", "usb4ca,301a";
 725                 reg = <1>;
 726                 pinctrl-names = "default";
 727                 pinctrl-0 = <&bt_host_wake_l>;
 728                 interrupt-parent = <&gpio1>;
 729                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 730                 interrupt-names = "wakeup";
 731         };
 732 };
 733
 734 /* PINCTRL OVERRIDES */
 735 &ec_ap_int_l {
 736         rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
 737 };
 738
 739 &ap_fw_wp {
 740         rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 741 };
 742
 743 &bl_en {
 744         rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 745 };
 746
 747 &bt_host_wake_l {
 748         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 749 };
 750
 751 &ec_ap_int_l {
 752         rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
 753 };
 754
 755 &headset_int_l {
 756         rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
 757 };
 758
 759 &i2s0_8ch_bus {
 760         rockchip,pins =
 761                 <3 RK_PD0 1 &pcfg_pull_none_6ma>,
 762                 <3 RK_PD1 1 &pcfg_pull_none_6ma>,
 763                 <3 RK_PD2 1 &pcfg_pull_none_6ma>,
 764                 <3 RK_PD3 1 &pcfg_pull_none_6ma>,
 765                 <3 RK_PD7 1 &pcfg_pull_none_6ma>,
 766                 <4 RK_PA0 1 &pcfg_pull_none_6ma>;
 767 };
 768
 769 /* there is no external pull up, so need to set this pin pull up */
 770 &sdmmc_cd_pin {
 771         rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
 772 };
 773
 774 &sd_pwr_1800_sel {
 775         rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
 776 };
 777
 778 &sdmode_en {
 779         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
 780 };
 781
 782 &touch_reset_l {
 783         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
 784 };
 785
 786 &touch_int_l {
 787         rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
 788 };
 789
 790 &pinctrl {
 791         pinctrl-0 = <
 792                 &ap_pwroff      /* AP will auto-assert this when in S3 */
 793                 &clk_32k        /* This pin is always 32k on gru boards */
 794                 &wlan_rf_kill_1v8_l
 795         >;
 796
 797         pcfg_pull_none_6ma: pcfg-pull-none-6ma {
 798                 bias-disable;
 799                 drive-strength = <6>;
 800         };
 801
 802         camera {
 803                 pp1250_cam_en: pp1250-dvdd {
 804                         rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 805                 };
 806
 807                 pp2800_cam_en: pp2800-avdd {
 808                         rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 809                 };
 810
 811                 ucam_rst: ucam_rst {
 812                         rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 813                 };
 814
 815                 wcam_rst: wcam_rst {
 816                         rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 817                 };
 818         };
 819
 820         digitizer {
 821                 pen_int_odl: pen-int-odl {
 822                         rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
 823                 };
 824
 825                 pen_reset_l: pen-reset-l {
 826                         rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
 827                 };
 828         };
 829
 830         discrete-regulators {
 831                 display_rst_l: display-rst-l {
 832                         rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>;
 833                 };
 834
 835                 ppvarp_lcd_en: ppvarp-lcd-en {
 836                         rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 837                 };
 838
 839                 ppvarn_lcd_en: ppvarn-lcd-en {
 840                         rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 841                 };
 842         };
 843
 844         dmic {
 845                 dmic_en: dmic-en {
 846                         rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 847                 };
 848         };
 849
 850         pen {
 851                 pen_eject_odl: pen-eject-odl {
 852                         rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 853                 };
 854         };
 855
 856         tpm {
 857                 h1_int_od_l: h1-int-od-l {
 858                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
 859                 };
 860         };
 861 };
 862
 863 &wifi {
 864         bt_en_1v8_l: bt-en-1v8-l {
 865                 rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 866         };
 867
 868         wlan_pd_1v8_l: wlan-pd-1v8-l {
 869                 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 870         };
 871
 872         /* Default pull-up, but just to be clear */
 873         wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l {
 874                 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 875         };
 876
 877         wifi_perst_l: wifi-perst-l {
 878                 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 879         };
 880
 881         wlan_host_wake_l: wlan-host-wake-l {
 882                 rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 883         };
 884 };