arch/arm64/boot/dts/renesas/draak.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Draak board
   4  *
   5  * Copyright (C) 2016-2018 Renesas Electronics Corp.
   6  * Copyright (C) 2017 Glider bvba
   7  */
   8
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/input/input.h>
  11
  12 / {
  13         model = "Renesas Draak board";
  14         compatible = "renesas,draak";
  15
  16         aliases {
  17                 serial0 = &scif2;
  18                 ethernet0 = &avb;
  19         };
  20
  21         audio_clkout: audio-clkout {
  22                 /*
  23                  * This is same as <&rcar_sound 0>
  24                  * but needed to avoid cs2000/rcar_sound probe dead-lock
  25                  */
  26                 compatible = "fixed-clock";
  27                 #clock-cells = <0>;
  28                 clock-frequency = <12288000>;
  29         };
  30
  31         backlight: backlight {
  32                 compatible = "pwm-backlight";
  33                 pwms = <&pwm1 0 50000>;
  34
  35                 brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
  36                 default-brightness-level = <10>;
  37
  38                 power-supply = <&reg_12p0v>;
  39                 enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
  40         };
  41
  42         chosen {
  43                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  44                 stdout-path = "serial0:115200n8";
  45         };
  46
  47         composite-in {
  48                 compatible = "composite-video-connector";
  49
  50                 port {
  51                         composite_con_in: endpoint {
  52                                 remote-endpoint = <&adv7180_in>;
  53                         };
  54                 };
  55         };
  56
  57         hdmi-in {
  58                 compatible = "hdmi-connector";
  59                 type = "a";
  60
  61                 port {
  62                         hdmi_con_in: endpoint {
  63                                 remote-endpoint = <&adv7612_in>;
  64                         };
  65                 };
  66         };
  67
  68         hdmi-out {
  69                 compatible = "hdmi-connector";
  70                 type = "a";
  71
  72                 port {
  73                         hdmi_con_out: endpoint {
  74                                 remote-endpoint = <&adv7511_out>;
  75                         };
  76                 };
  77         };
  78
  79         keys {
  80                 compatible = "gpio-keys";
  81
  82                 pinctrl-0 = <&keys_pins>;
  83                 pinctrl-names = "default";
  84
  85                 key-1 {
  86                         gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
  87                         linux,code = <KEY_1>;
  88                         label = "SW56-1";
  89                         wakeup-source;
  90                         debounce-interval = <20>;
  91                 };
  92                 key-2 {
  93                         gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
  94                         linux,code = <KEY_2>;
  95                         label = "SW56-2";
  96                         wakeup-source;
  97                         debounce-interval = <20>;
  98                 };
  99                 key-3 {
 100                         gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
 101                         linux,code = <KEY_3>;
 102                         label = "SW56-3";
 103                         wakeup-source;
 104                         debounce-interval = <20>;
 105                 };
 106                 key-4 {
 107                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 108                         linux,code = <KEY_4>;
 109                         label = "SW56-4";
 110                         wakeup-source;
 111                         debounce-interval = <20>;
 112                 };
 113         };
 114
 115         lvds-decoder {
 116                 compatible = "thine,thc63lvd1024";
 117                 vcc-supply = <&reg_3p3v>;
 118
 119                 ports {
 120                         #address-cells = <1>;
 121                         #size-cells = <0>;
 122
 123                         port@0 {
 124                                 reg = <0>;
 125                                 thc63lvd1024_in: endpoint {
 126                                         remote-endpoint = <&lvds0_out>;
 127                                 };
 128                         };
 129
 130                         port@2 {
 131                                 reg = <2>;
 132                                 thc63lvd1024_out: endpoint {
 133                                         remote-endpoint = <&adv7511_in>;
 134                                 };
 135                         };
 136                 };
 137         };
 138
 139         memory@48000000 {
 140                 device_type = "memory";
 141                 /* first 128MB is reserved for secure area. */
 142                 reg = <0x0 0x48000000 0x0 0x18000000>;
 143         };
 144
 145         reg_1p8v: regulator-1p8v {
 146                 compatible = "regulator-fixed";
 147                 regulator-name = "fixed-1.8V";
 148                 regulator-min-microvolt = <1800000>;
 149                 regulator-max-microvolt = <1800000>;
 150                 regulator-boot-on;
 151                 regulator-always-on;
 152         };
 153
 154         reg_3p3v: regulator-3p3v {
 155                 compatible = "regulator-fixed";
 156                 regulator-name = "fixed-3.3V";
 157                 regulator-min-microvolt = <3300000>;
 158                 regulator-max-microvolt = <3300000>;
 159                 regulator-boot-on;
 160                 regulator-always-on;
 161         };
 162
 163         reg_12p0v: regulator-12p0v {
 164                 compatible = "regulator-fixed";
 165                 regulator-name = "D12.0V";
 166                 regulator-min-microvolt = <12000000>;
 167                 regulator-max-microvolt = <12000000>;
 168                 regulator-boot-on;
 169                 regulator-always-on;
 170         };
 171
 172         sound_card: sound {
 173                 compatible = "audio-graph-card";
 174
 175                 dais = <&rsnd_port0     /* ak4613 */
 176                         /* HDMI is not yet supported */
 177                 >;
 178         };
 179
 180         vga {
 181                 compatible = "vga-connector";
 182
 183                 port {
 184                         vga_in: endpoint {
 185                                 remote-endpoint = <&adv7123_out>;
 186                         };
 187                 };
 188         };
 189
 190         vga-encoder {
 191                 compatible = "adi,adv7123";
 192
 193                 ports {
 194                         #address-cells = <1>;
 195                         #size-cells = <0>;
 196
 197                         port@0 {
 198                                 reg = <0>;
 199                                 adv7123_in: endpoint {
 200                                         remote-endpoint = <&du_out_rgb>;
 201                                 };
 202                         };
 203                         port@1 {
 204                                 reg = <1>;
 205                                 adv7123_out: endpoint {
 206                                         remote-endpoint = <&vga_in>;
 207                                 };
 208                         };
 209                 };
 210         };
 211
 212         x12_clk: x12 {
 213                 compatible = "fixed-clock";
 214                 #clock-cells = <0>;
 215                 clock-frequency = <74250000>;
 216         };
 217
 218         x19_clk: x19 {
 219                 compatible = "fixed-clock";
 220                 #clock-cells = <0>;
 221                 clock-frequency = <24576000>;
 222         };
 223 };
 224
 225 &audio_clk_b {
 226         /*
 227          * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB,
 228          * and R-Car Sound uses AUDIO_CLKB.
 229          * Note is that schematic indicates VI4_FIELD conection only
 230          * not AUDIO_CLKB at SoC page.
 231          * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60.
 232          * SW60 should be 1-2.
 233          */
 234
 235         clock-frequency = <22579200>;
 236 };
 237
 238 &avb {
 239         pinctrl-0 = <&avb0_pins>;
 240         pinctrl-names = "default";
 241         renesas,no-ether-link;
 242         phy-handle = <&phy0>;
 243         status = "okay";
 244
 245         phy0: ethernet-phy@0 {
 246                 compatible = "ethernet-phy-id0022.1622",
 247                              "ethernet-phy-ieee802.3-c22";
 248                 rxc-skew-ps = <1500>;
 249                 reg = <0>;
 250                 interrupt-parent = <&gpio5>;
 251                 interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 252                 reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
 253                 /*
 254                  * TX clock internal delay mode is required for reliable
 255                  * 1Gbps communication using the KSZ9031RNX phy present on
 256                  * the Draak board, however, TX clock internal delay mode
 257                  * isn't supported on R-Car D3(e).  Thus, limit speed to
 258                  * 100Mbps for reliable communication.
 259                  */
 260                 max-speed = <100>;
 261         };
 262 };
 263
 264 &can0 {
 265         pinctrl-0 = <&can0_pins>;
 266         pinctrl-names = "default";
 267         status = "okay";
 268 };
 269
 270 &can1 {
 271         pinctrl-0 = <&can1_pins>;
 272         pinctrl-names = "default";
 273         status = "okay";
 274 };
 275
 276 &du {
 277         pinctrl-0 = <&du_pins>;
 278         pinctrl-names = "default";
 279         status = "okay";
 280
 281         clocks = <&cpg CPG_MOD 724>,
 282                  <&cpg CPG_MOD 723>,
 283                  <&x12_clk>;
 284         clock-names = "du.0", "du.1", "dclkin.0";
 285
 286         ports {
 287                 port@0 {
 288                         du_out_rgb: endpoint {
 289                                 remote-endpoint = <&adv7123_in>;
 290                         };
 291                 };
 292         };
 293 };
 294
 295 &ehci0 {
 296         dr_mode = "host";
 297         status = "okay";
 298 };
 299
 300 &extal_clk {
 301         clock-frequency = <48000000>;
 302 };
 303
 304 &hsusb {
 305         dr_mode = "host";
 306         status = "okay";
 307 };
 308
 309 &i2c0 {
 310         pinctrl-0 = <&i2c0_pins>;
 311         pinctrl-names = "default";
 312         status = "okay";
 313
 314         ak4613: codec@10 {
 315                 compatible = "asahi-kasei,ak4613";
 316                 #sound-dai-cells = <0>;
 317                 reg = <0x10>;
 318                 clocks = <&rcar_sound 0>; /* audio_clkout */
 319
 320                 asahi-kasei,in1-single-end;
 321                 asahi-kasei,in2-single-end;
 322                 asahi-kasei,out1-single-end;
 323                 asahi-kasei,out2-single-end;
 324                 asahi-kasei,out3-single-end;
 325                 asahi-kasei,out4-single-end;
 326                 asahi-kasei,out5-single-end;
 327                 asahi-kasei,out6-single-end;
 328
 329                 port {
 330                         ak4613_endpoint: endpoint {
 331                                 remote-endpoint = <&rsnd_for_ak4613>;
 332                         };
 333                 };
 334         };
 335
 336         composite-in@20 {
 337                 compatible = "adi,adv7180cp";
 338                 reg = <0x20>;
 339
 340                 ports {
 341                         #address-cells = <1>;
 342                         #size-cells = <0>;
 343
 344                         port@0 {
 345                                 reg = <0>;
 346                                 adv7180_in: endpoint {
 347                                         remote-endpoint = <&composite_con_in>;
 348                                 };
 349                         };
 350
 351                         port@3 {
 352                                 reg = <3>;
 353
 354                                 /*
 355                                  * The VIN4 video input path is shared between
 356                                  * CVBS and HDMI inputs through SW[49-53]
 357                                  * switches.
 358                                  *
 359                                  * CVBS is the default selection, link it to
 360                                  * VIN4 here.
 361                                  */
 362                                 adv7180_out: endpoint {
 363                                         remote-endpoint = <&vin4_in>;
 364                                 };
 365                         };
 366                 };
 367
 368         };
 369
 370         hdmi-encoder@39 {
 371                 compatible = "adi,adv7511w";
 372                 reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
 373                 reg-names = "main", "edid", "cec", "packet";
 374                 interrupt-parent = <&gpio1>;
 375                 interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 376
 377                 adi,input-depth = <8>;
 378                 adi,input-colorspace = "rgb";
 379                 adi,input-clock = "1x";
 380
 381                 ports {
 382                         #address-cells = <1>;
 383                         #size-cells = <0>;
 384
 385                         port@0 {
 386                                 reg = <0>;
 387                                 adv7511_in: endpoint {
 388                                         remote-endpoint = <&thc63lvd1024_out>;
 389                                 };
 390                         };
 391
 392                         port@1 {
 393                                 reg = <1>;
 394                                 adv7511_out: endpoint {
 395                                         remote-endpoint = <&hdmi_con_out>;
 396                                 };
 397                         };
 398                 };
 399         };
 400
 401         hdmi-decoder@4c {
 402                 compatible = "adi,adv7612";
 403                 reg = <0x4c>;
 404                 default-input = <0>;
 405
 406                 ports {
 407                         #address-cells = <1>;
 408                         #size-cells = <0>;
 409
 410                         port@0 {
 411                                 reg = <0>;
 412
 413                                 adv7612_in: endpoint {
 414                                         remote-endpoint = <&hdmi_con_in>;
 415                                 };
 416                         };
 417
 418                         port@2 {
 419                                 reg = <2>;
 420
 421                                 /*
 422                                  * The VIN4 video input path is shared between
 423                                  * CVBS and HDMI inputs through SW[49-53]
 424                                  * switches.
 425                                  *
 426                                  * CVBS is the default selection, leave HDMI
 427                                  * not connected here.
 428                                  */
 429                                 adv7612_out: endpoint {
 430                                         pclk-sample = <0>;
 431                                         hsync-active = <0>;
 432                                         vsync-active = <0>;
 433                                 };
 434                         };
 435                 };
 436         };
 437
 438         cs2000: clk-multiplier@4f {
 439                 #clock-cells = <0>;
 440                 compatible = "cirrus,cs2000-cp";
 441                 reg = <0x4f>;
 442                 clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */
 443                 clock-names = "clk_in", "ref_clk";
 444
 445                 assigned-clocks = <&cs2000>;
 446                 assigned-clock-rates = <24576000>; /* 1/1 divide */
 447         };
 448
 449         eeprom@50 {
 450                 compatible = "rohm,br24t01", "atmel,24c01";
 451                 reg = <0x50>;
 452                 pagesize = <8>;
 453         };
 454 };
 455
 456 &i2c1 {
 457         pinctrl-0 = <&i2c1_pins>;
 458         pinctrl-names = "default";
 459         status = "okay";
 460 };
 461
 462 &lvds0 {
 463         status = "okay";
 464
 465         clocks = <&cpg CPG_MOD 727>,
 466                  <&x12_clk>,
 467                  <&extal_clk>;
 468         clock-names = "fck", "dclkin.0", "extal";
 469
 470         ports {
 471                 port@1 {
 472                         lvds0_out: endpoint {
 473                                 remote-endpoint = <&thc63lvd1024_in>;
 474                         };
 475                 };
 476         };
 477 };
 478
 479 &lvds1 {
 480         /*
 481          * Even though the LVDS1 output is not connected, the encoder must be
 482          * enabled to supply a pixel clock to the DU for the DPAD output when
 483          * LVDS0 is in use.
 484          */
 485         status = "okay";
 486
 487         clocks = <&cpg CPG_MOD 727>,
 488                  <&x12_clk>,
 489                  <&extal_clk>;
 490         clock-names = "fck", "dclkin.0", "extal";
 491 };
 492
 493 &ohci0 {
 494         dr_mode = "host";
 495         status = "okay";
 496 };
 497
 498 &pfc {
 499         avb0_pins: avb {
 500                 groups = "avb0_link", "avb0_mdio", "avb0_mii";
 501                 function = "avb0";
 502         };
 503
 504         can0_pins: can0 {
 505                 groups = "can0_data_a";
 506                 function = "can0";
 507         };
 508
 509         can1_pins: can1 {
 510                 groups = "can1_data_a";
 511                 function = "can1";
 512         };
 513
 514         du_pins: du {
 515                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 516                 function = "du";
 517         };
 518
 519         i2c0_pins: i2c0 {
 520                 groups = "i2c0";
 521                 function = "i2c0";
 522         };
 523
 524         i2c1_pins: i2c1 {
 525                 groups = "i2c1";
 526                 function = "i2c1";
 527         };
 528
 529         keys_pins: keys {
 530                 pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15";
 531                 bias-pull-up;
 532         };
 533
 534         pwm0_pins: pwm0 {
 535                 groups = "pwm0_c";
 536                 function = "pwm0";
 537         };
 538
 539         pwm1_pins: pwm1 {
 540                 groups = "pwm1_c";
 541                 function = "pwm1";
 542         };
 543
 544         rpc_pins: rpc {
 545                 groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
 546                          "rpc_int";
 547                 function = "rpc";
 548         };
 549
 550         scif2_pins: scif2 {
 551                 groups = "scif2_data";
 552                 function = "scif2";
 553         };
 554
 555         sdhi2_pins: sd2 {
 556                 groups = "mmc_data8", "mmc_ctrl";
 557                 function = "mmc";
 558                 power-source = <1800>;
 559         };
 560
 561         sdhi2_pins_uhs: sd2_uhs {
 562                 groups = "mmc_data8", "mmc_ctrl";
 563                 function = "mmc";
 564                 power-source = <1800>;
 565         };
 566
 567         sound_pins: sound {
 568                 groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a";
 569                 function = "ssi";
 570         };
 571
 572         sound_clk_pins: sound-clk {
 573                 groups = "audio_clk_a", "audio_clk_b",
 574                          "audio_clkout", "audio_clkout1";
 575                 function = "audio_clk";
 576         };
 577
 578         usb0_pins: usb0 {
 579                 groups = "usb0";
 580                 function = "usb0";
 581         };
 582
 583         vin4_pins_cvbs: vin4 {
 584                 groups = "vin4_data8", "vin4_sync", "vin4_clk";
 585                 function = "vin4";
 586         };
 587 };
 588
 589 &pwm0 {
 590         pinctrl-0 = <&pwm0_pins>;
 591         pinctrl-names = "default";
 592
 593         status = "okay";
 594 };
 595
 596 &pwm1 {
 597         pinctrl-0 = <&pwm1_pins>;
 598         pinctrl-names = "default";
 599
 600         status = "okay";
 601 };
 602
 603 &rcar_sound {
 604         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 605         pinctrl-names = "default";
 606
 607         /* Single DAI */
 608         #sound-dai-cells = <0>;
 609
 610         /* audio_clkout0/1 */
 611         #clock-cells = <1>;
 612         clock-frequency = <12288000 11289600>;
 613
 614         status = "okay";
 615
 616         clocks = <&cpg CPG_MOD 1005>,
 617                  <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
 618                  <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
 619                  <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
 620                  <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
 621                  <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 622                  <&cs2000>, <&audio_clk_b>,
 623                  <&cpg CPG_CORE R8A77995_CLK_ZA2>;
 624
 625         ports {
 626                 rsnd_port0: port {
 627                         rsnd_for_ak4613: endpoint {
 628                                 remote-endpoint = <&ak4613_endpoint>;
 629                                 dai-format = "left_j";
 630                                 bitclock-master = <&rsnd_for_ak4613>;
 631                                 frame-master = <&rsnd_for_ak4613>;
 632                                 playback = <&ssi3>, <&src5>, <&dvc0>;
 633                                 capture  = <&ssi4>, <&src6>, <&dvc1>;
 634                         };
 635                 };
 636         };
 637 };
 638
 639 &rpc {
 640         pinctrl-0 = <&rpc_pins>;
 641         pinctrl-names = "default";
 642
 643         /* Left disabled.  To be enabled by firmware when unlocked. */
 644
 645         flash@0 {
 646                 compatible = "cypress,hyperflash", "cfi-flash";
 647                 reg = <0>;
 648
 649                 partitions {
 650                         compatible = "fixed-partitions";
 651                         #address-cells = <1>;
 652                         #size-cells = <1>;
 653
 654                         bootparam@0 {
 655                                 reg = <0x00000000 0x040000>;
 656                                 read-only;
 657                         };
 658                         bl2@40000 {
 659                                 reg = <0x00040000 0x140000>;
 660                                 read-only;
 661                         };
 662                         cert_header_sa6@180000 {
 663                                 reg = <0x00180000 0x040000>;
 664                                 read-only;
 665                         };
 666                         bl31@1c0000 {
 667                                 reg = <0x001c0000 0x040000>;
 668                                 read-only;
 669                         };
 670                         tee@200000 {
 671                                 reg = <0x00200000 0x440000>;
 672                                 read-only;
 673                         };
 674                         uboot@640000 {
 675                                 reg = <0x00640000 0x100000>;
 676                                 read-only;
 677                         };
 678                         dtb@740000 {
 679                                 reg = <0x00740000 0x080000>;
 680                         };
 681                         kernel@7c0000 {
 682                                 reg = <0x007c0000 0x1400000>;
 683                         };
 684                         user@1bc0000 {
 685                                 reg = <0x01bc0000 0x2440000>;
 686                         };
 687                 };
 688         };
 689 };
 690
 691 &rwdt {
 692         timeout-sec = <60>;
 693         status = "okay";
 694 };
 695
 696 &scif2 {
 697         pinctrl-0 = <&scif2_pins>;
 698         pinctrl-names = "default";
 699
 700         status = "okay";
 701 };
 702
 703 &sdhi2 {
 704         /* used for on-board eMMC */
 705         pinctrl-0 = <&sdhi2_pins>;
 706         pinctrl-1 = <&sdhi2_pins_uhs>;
 707         pinctrl-names = "default", "state_uhs";
 708
 709         vmmc-supply = <&reg_3p3v>;
 710         vqmmc-supply = <&reg_1p8v>;
 711         bus-width = <8>;
 712         mmc-hs200-1_8v;
 713         no-sd;
 714         no-sdio;
 715         non-removable;
 716         status = "okay";
 717 };
 718
 719 &ssi4 {
 720         shared-pin;
 721 };
 722
 723 &usb2_phy0 {
 724         pinctrl-0 = <&usb0_pins>;
 725         pinctrl-names = "default";
 726
 727         renesas,no-otg-pins;
 728         status = "okay";
 729 };
 730
 731 &vin4 {
 732         pinctrl-0 = <&vin4_pins_cvbs>;
 733         pinctrl-names = "default";
 734
 735         status = "okay";
 736
 737         ports {
 738                 port {
 739                         vin4_in: endpoint {
 740                                 remote-endpoint = <&adv7180_out>;
 741                         };
 742                 };
 743         };
 744 };