arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright 2020, Compass Electronics Group, LLC
   4  */
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         backlight_lvds: backlight-lvds {
  11                 compatible = "pwm-backlight";
  12                 power-supply = <&reg_lcd>;
  13                 enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>;
  14                 pwms = <&pwm2 0 50000>;
  15                 brightness-levels = <0 4 8 16 32 64 128 255>;
  16                 default-brightness-level = <6>;
  17         };
  18
  19         backlight_rgb: backlight-rgb {
  20                 compatible = "pwm-backlight";
  21                 power-supply = <&reg_lcd>;
  22                 enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
  23                 pwms = <&pwm0 0 50000>;
  24                 brightness-levels = <0 4 8 16 32 64 128 255>;
  25                 default-brightness-level = <6>;
  26         };
  27
  28         hdmi0-out {
  29                 compatible = "hdmi-connector";
  30                 type = "a";
  31
  32                 port {
  33                         hdmi0_con: endpoint {
  34                                 remote-endpoint = <&rcar_dw_hdmi0_out>;
  35                         };
  36                 };
  37         };
  38
  39         keys {
  40                 compatible = "gpio-keys";
  41
  42                 key-1 {
  43                         gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_1>;
  45                         label = "Switch-1";
  46                         wakeup-source;
  47                         debounce-interval = <20>;
  48                 };
  49                 key-2 {
  50                         gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_2>;
  52                         label = "Switch-2";
  53                         wakeup-source;
  54                         debounce-interval = <20>;
  55                 };
  56                 key-3 {
  57                         gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
  58                         linux,code = <KEY_3>;
  59                         label = "Switch-3";
  60                         wakeup-source;
  61                         debounce-interval = <20>;
  62                 };
  63                 key-4 {
  64                         gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
  65                         linux,code = <KEY_4>;
  66                         label = "Switch-4";
  67                         wakeup-source;
  68                         debounce-interval = <20>;
  69                 };
  70                 key-5 {
  71                         gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
  72                         linux,code = <KEY_5>;
  73                         label = "Switch-4";
  74                         wakeup-source;
  75                         debounce-interval = <20>;
  76                 };
  77         };
  78
  79         leds {
  80                 compatible = "gpio-leds";
  81                 pinctrl-0 = <&led_pins>;
  82                 pinctrl-names = "default";
  83
  84                 led0 {
  85                         gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
  86                         label = "LED0";
  87                         linux,default-trigger = "heartbeat";
  88                 };
  89                 led1 {
  90                         gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
  91                         label = "LED1";
  92                 };
  93                 led2 {
  94                         gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
  95                         label = "LED2";
  96                 };
  97                 led3 {
  98                         gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
  99                         label = "LED3";
 100                 };
 101         };
 102
 103         lvds {
 104                 compatible = "panel-lvds";
 105                 power-supply = <&reg_lcd_reset>;
 106                 width-mm = <223>;
 107                 height-mm = <125>;
 108                 backlight = <&backlight_lvds>;
 109                 data-mapping = "vesa-24";
 110
 111                 panel-timing {
 112                         /* 800x480@60Hz */
 113                         clock-frequency = <30000000>;
 114                         hactive = <800>;
 115                         vactive = <480>;
 116                         hsync-len = <48>;
 117                         hfront-porch = <40>;
 118                         hback-porch = <40>;
 119                         vfront-porch = <13>;
 120                         vback-porch = <29>;
 121                         vsync-len = <3>;
 122                         hsync-active = <1>;
 123                         vsync-active = <1>;
 124                         de-active = <1>;
 125                         pixelclk-active = <0>;
 126                 };
 127
 128                 port {
 129                         panel_in: endpoint {
 130                                 remote-endpoint = <&lvds0_out>;
 131                         };
 132                 };
 133         };
 134
 135         rgb {
 136                 /* Different LCD with compatible timings */
 137                 compatible = "rocktech,rk070er9427";
 138                 backlight = <&backlight_rgb>;
 139                 enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 140                 power-supply = <&reg_lcd>;
 141                 port {
 142                         rgb_panel: endpoint {
 143                                 remote-endpoint = <&du_out_rgb>;
 144                         };
 145                 };
 146         };
 147
 148         reg_audio: regulator_audio {
 149                 compatible = "regulator-fixed";
 150                 regulator-name = "audio-1.8V";
 151                 regulator-min-microvolt = <1800000>;
 152                 regulator-max-microvolt = <1800000>;
 153                 gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>;
 154                 enable-active-high;
 155         };
 156
 157         reg_lcd: regulator-lcd {
 158                 compatible = "regulator-fixed";
 159                 regulator-name = "lcd_panel_pwr";
 160                 regulator-min-microvolt = <3300000>;
 161                 regulator-max-microvolt = <3300000>;
 162                 gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
 163                 enable-active-high;
 164         };
 165
 166         reg_lcd_reset: regulator-lcd-reset {
 167                 compatible = "regulator-fixed";
 168                 regulator-name = "nLCD_RESET";
 169                 regulator-min-microvolt = <3300000>;
 170                 regulator-max-microvolt = <3300000>;
 171                 gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
 172                 enable-active-high;
 173                 vin-supply = <&reg_lcd>;
 174         };
 175
 176         reg_cam0: regulator_camera {
 177                 compatible = "regulator-fixed";
 178                 regulator-name = "reg_cam0";
 179                 regulator-min-microvolt = <1800000>;
 180                 regulator-max-microvolt = <1800000>;
 181                 gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
 182                 enable-active-high;
 183         };
 184
 185         reg_cam1: regulator_camera {
 186                 compatible = "regulator-fixed";
 187                 regulator-name = "reg_cam1";
 188                 regulator-min-microvolt = <1800000>;
 189                 regulator-max-microvolt = <1800000>;
 190                 gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
 191                 enable-active-high;
 192                 startup-delay-us = <100000>;
 193         };
 194
 195         sound_card {
 196                 compatible = "audio-graph-card";
 197                 label = "rcar-sound";
 198                 dais = <&rsnd_port0>, <&rsnd_port1>;
 199         };
 200
 201         vccq_sdhi0: regulator-vccq-sdhi0 {
 202                 compatible = "regulator-gpio";
 203
 204                 regulator-name = "SDHI0 VccQ";
 205                 regulator-min-microvolt = <1800000>;
 206                 regulator-max-microvolt = <3300000>;
 207
 208                 gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
 209                 gpios-states = <1>;
 210                 states = <3300000 1>, <1800000 0>;
 211                 regulator-always-on;
 212         };
 213
 214         /* External DU dot clocks */
 215         x302_clk: x302-clock {
 216                 compatible = "fixed-clock";
 217                 #clock-cells = <0>;
 218                 clock-frequency = <33000000>;
 219         };
 220
 221         x304_clk: x304-clock {
 222                 compatible = "fixed-clock";
 223                 #clock-cells = <0>;
 224                 clock-frequency = <25000000>;
 225         };
 226
 227         connector {
 228                 compatible = "usb-c-connector";
 229                 label = "USB-C";
 230                 data-role = "dual";
 231
 232                 ports {
 233                         #address-cells = <1>;
 234                         #size-cells = <0>;
 235                         port@0 {
 236                                 reg = <0>;
 237                                 hs_ep: endpoint {
 238                                         remote-endpoint = <&usb3_hs_ep>;
 239                                 };
 240                         };
 241                         port@1 {
 242                                 reg = <1>;
 243                                 ss_ep: endpoint {
 244                                         remote-endpoint = <&hd3ss3220_in_ep>;
 245                                 };
 246                         };
 247                 };
 248         };
 249 };
 250
 251 &audio_clk_a {
 252         clock-frequency = <24576000>;
 253         assigned-clocks = <&versaclock6_bb 4>;
 254         assigned-clock-rates = <24576000>;
 255 };
 256
 257 &audio_clk_b {
 258         clock-frequency = <22579200>;
 259 };
 260
 261 &can0 {
 262         pinctrl-0 = <&can0_pins>;
 263         pinctrl-names = "default";
 264         renesas,can-clock-select = <0x0>;
 265         status = "okay";
 266 };
 267
 268 &can1 {
 269         pinctrl-0 = <&can1_pins>;
 270         pinctrl-names = "default";
 271         renesas,can-clock-select = <0x0>;
 272         status = "okay";
 273 };
 274
 275 &du {
 276         pinctrl-0 = <&du_pins>;
 277         pinctrl-names = "default";
 278         status = "okay";
 279
 280         clocks = <&cpg CPG_MOD 724>,
 281                 <&cpg CPG_MOD 723>,
 282                 <&cpg CPG_MOD 722>,
 283                 <&versaclock5 1>,
 284                 <&x302_clk>,
 285                 <&versaclock5 2>;
 286         clock-names = "du.0", "du.1", "du.2",
 287                 "dclkin.0", "dclkin.1", "dclkin.2";
 288 };
 289
 290 &du_out_rgb {
 291         remote-endpoint = <&rgb_panel>;
 292 };
 293
 294 &ehci0 {
 295         dr_mode = "otg";
 296         status = "okay";
 297         clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 298 };
 299
 300 &ehci1 {
 301         status = "okay";
 302         clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 303 };
 304
 305 &hdmi0 {
 306         status = "okay";
 307         ports {
 308                 #address-cells = <1>;
 309                 #size-cells = <0>;
 310                 port@0 {
 311                         reg = <0>;
 312                         dw_hdmi0_in: endpoint {
 313                                 remote-endpoint = <&du_out_hdmi0>;
 314                         };
 315                 };
 316                 port@1 {
 317                         reg = <1>;
 318                         rcar_dw_hdmi0_out: endpoint {
 319                                 remote-endpoint = <&hdmi0_con>;
 320                         };
 321                 };
 322                 port@2 {
 323                         reg = <2>;
 324                         dw_hdmi0_snd_in: endpoint {
 325                                 remote-endpoint = <&rsnd_endpoint1>;
 326                         };
 327                 };
 328         };
 329 };
 330
 331 &hscif1 {
 332         pinctrl-0 = <&hscif1_pins>;
 333         pinctrl-names = "default";
 334         uart-has-rtscts;
 335         status = "okay";
 336 };
 337
 338 &hsusb {
 339         dr_mode = "otg";
 340         status = "okay";
 341 };
 342
 343 &i2c2 {
 344         status = "okay";
 345         clock-frequency = <100000>;
 346         pinctrl-0 = <&i2c2_pins>;
 347         pinctrl-names = "default";
 348
 349         gpio_exp2: gpio@21 {
 350                 compatible = "onnn,pca9654";
 351                 reg = <0x21>;
 352                 gpio-controller;
 353                 #gpio-cells = <2>;
 354         };
 355
 356         gpio_exp3: gpio@22 {
 357                 compatible = "onnn,pca9654";
 358                 reg = <0x22>;
 359                 gpio-controller;
 360                 #gpio-cells = <2>;
 361         };
 362
 363         gpio_exp4: gpio@23 {
 364                 compatible = "onnn,pca9654";
 365                 reg = <0x23>;
 366                 gpio-controller;
 367                 #gpio-cells = <2>;
 368         };
 369
 370         versaclock6_bb: clock-controller@6a {
 371                 compatible = "idt,5p49v6965";
 372                 reg = <0x6a>;
 373                 #clock-cells = <1>;
 374                 clocks = <&x304_clk>;
 375                 clock-names = "xin";
 376                 /* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */
 377                 assigned-clocks = <&versaclock6_bb 1>,
 378                                    <&versaclock6_bb 2>,
 379                                    <&versaclock6_bb 3>,
 380                                    <&versaclock6_bb 4>;
 381                 assigned-clock-rates =  <24000000>, <24000000>, <24000000>, <24576000>;
 382         };
 383 };
 384
 385 &i2c0 {
 386         status = "okay";
 387         clock-frequency = <400000>;
 388
 389         pinctrl-0 = <&i2c0_pins>;
 390         pinctrl-names = "default";
 391 };
 392
 393 &i2c5 {
 394         status = "okay";
 395         clock-frequency = <100000>;
 396         pinctrl-0 = <&i2c5_pins>;
 397         pinctrl-names = "default";
 398
 399         codec: wm8962@1a {
 400                 compatible = "wlf,wm8962";
 401                 reg = <0x1a>;
 402                 DCVDD-supply = <&reg_audio>;
 403                 DBVDD-supply = <&reg_audio>;
 404                 AVDD-supply = <&reg_audio>;
 405                 CPVDD-supply = <&reg_audio>;
 406                 MICVDD-supply = <&reg_audio>;
 407                 PLLVDD-supply = <&reg_audio>;
 408                 SPKVDD1-supply = <&reg_audio>;
 409                 SPKVDD2-supply = <&reg_audio>;
 410                 gpio-cfg = <
 411                         0x0000 /* 0:Default */
 412                         0x0000 /* 1:Default */
 413                         0x0000 /* 2:Default */
 414                         0x0000 /* 3:Default */
 415                         0x0000 /* 4:Default */
 416                         0x0000 /* 5:Default */
 417                 >;
 418                 port {
 419                         wm8962_endpoint: endpoint {
 420                                 remote-endpoint = <&rsnd_endpoint0>;
 421                         };
 422                 };
 423         };
 424
 425         /* 0 - lcd_reset */
 426         /* 1 - lcd_pwr */
 427         /* 2 - lcd_select */
 428         /* 3 - backlight-enable */
 429         /* 4 - Touch_shdwn */
 430         /* 5 - LCD_H_pol */
 431         /* 6 - lcd_V_pol */
 432         gpio_exp1: gpio@20 {
 433                 compatible = "onnn,pca9654";
 434                 reg = <0x20>;
 435                 gpio-controller;
 436                 #gpio-cells = <2>;
 437         };
 438
 439         touchscreen@26 {
 440                 compatible = "ilitek,ili2117";
 441                 reg = <0x26>;
 442                 interrupt-parent = <&gpio5>;
 443                 interrupts = <9 IRQ_TYPE_EDGE_RISING>;
 444                 wakeup-source;
 445         };
 446
 447         hd3ss3220@47 {
 448                 compatible = "ti,hd3ss3220";
 449                 reg = <0x47>;
 450                 interrupt-parent = <&gpio6>;
 451                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 452
 453                 ports {
 454                         #address-cells = <1>;
 455                         #size-cells = <0>;
 456                         port@0 {
 457                                 reg = <0>;
 458                                 hd3ss3220_in_ep: endpoint {
 459                                         remote-endpoint = <&ss_ep>;
 460                                 };
 461                         };
 462                         port@1 {
 463                                 reg = <1>;
 464                                 hd3ss3220_out_ep: endpoint {
 465                                         remote-endpoint = <&usb3_role_switch>;
 466                                 };
 467                         };
 468                 };
 469         };
 470 };
 471
 472 &lvds0 {
 473         status = "okay";
 474
 475         ports {
 476                 port@1 {
 477                         lvds0_out: endpoint {
 478                                 remote-endpoint = <&panel_in>;
 479                         };
 480                 };
 481         };
 482 };
 483
 484 &ohci0 {
 485         dr_mode = "otg";
 486         status = "okay";
 487 };
 488
 489 &ohci1 {
 490         status = "okay";
 491 };
 492
 493 &pciec0 {
 494         status = "okay";
 495 };
 496
 497 &pciec1 {
 498         status = "okay";
 499 };
 500
 501 &pcie_bus_clk {
 502         clock-frequency = <100000000>;
 503 };
 504
 505 &pfc {
 506         can0_pins: can0 {
 507                 groups = "can0_data_a";
 508                 function = "can0";
 509         };
 510
 511         can1_pins: can1 {
 512                 groups = "can1_data";
 513                 function = "can1";
 514         };
 515
 516         du_pins: du {
 517                 groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
 518                 function = "du";
 519         };
 520
 521         i2c2_pins: i2c2 {
 522                 groups = "i2c2_a";
 523                 function = "i2c2";
 524         };
 525
 526         i2c5_pins: i2c5 {
 527                 groups = "i2c5";
 528                 function = "i2c5";
 529         };
 530
 531         led_pins: leds {
 532                 /* GP_0_4 , AVS1, AVS2, GP_7_3 */
 533                 pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
 534                 bias-pull-down;
 535         };
 536
 537         pwm0_pins: pwm0 {
 538                 groups = "pwm0";
 539                 function = "pwm0";
 540         };
 541
 542         pwm2_pins: pwm2 {
 543                 groups = "pwm2_a";
 544                 function = "pwm2_a";
 545         };
 546
 547         sdhi0_pins: sd0 {
 548                 groups = "sdhi0_data4", "sdhi0_ctrl";
 549                 function = "sdhi0";
 550                 power-source = <3300>;
 551         };
 552
 553         sdhi0_pins_uhs: sd0_uhs {
 554                 groups = "sdhi0_data4", "sdhi0_ctrl";
 555                 function = "sdhi0";
 556                 power-source = <1800>;
 557         };
 558
 559         sound_pins: sound {
 560                 groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
 561                 function = "ssi";
 562         };
 563
 564         sound_clk_pins: sound_clk {
 565                 groups = "audio_clk_a_a";
 566                 function = "audio_clk";
 567         };
 568
 569         usb0_pins: usb0 {
 570                 mux {
 571                         groups = "usb0";
 572                         function = "usb0";
 573                 };
 574         };
 575
 576         usb1_pins: usb1 {
 577                 mux {
 578                         groups = "usb1";
 579                         function = "usb1";
 580                 };
 581         };
 582
 583         usb30_pins: usb30 {
 584                 mux {
 585                         groups = "usb30";
 586                         function = "usb30";
 587                 };
 588         };
 589 };
 590
 591 &pwm0 {
 592         pinctrl-0 = <&pwm0_pins>;
 593         pinctrl-names = "default";
 594         status = "okay";
 595 };
 596
 597 &pwm2 {
 598         pinctrl-0 = <&pwm2_pins>;
 599         pinctrl-names = "default";
 600         status = "okay";
 601 };
 602
 603 &rcar_sound {
 604         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 605         pinctrl-names = "default";
 606
 607         /* Single DAI */
 608         #sound-dai-cells = <0>;
 609
 610         /* audio_clkout0/1/2/3 */
 611         #clock-cells = <1>;
 612         clock-frequency = <11289600>;
 613
 614         status = "okay";
 615
 616         clocks = <&cpg CPG_MOD 1005>,
 617                  <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
 618                  <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
 619                  <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
 620                  <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
 621                  <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
 622                  <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
 623                  <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
 624                  <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
 625                  <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
 626                  <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
 627                  <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
 628                  <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
 629                  <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 630                  <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
 631                  <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
 632
 633         ports {
 634                 #address-cells = <1>;
 635                 #size-cells = <0>;
 636                 rsnd_port0: port@0 {
 637                         reg = <0>;
 638                         rsnd_endpoint0: endpoint {
 639                                 remote-endpoint = <&wm8962_endpoint>;
 640
 641                                 dai-format = "i2s";
 642                                 bitclock-master = <&rsnd_endpoint0>;
 643                                 frame-master = <&rsnd_endpoint0>;
 644
 645                                 playback = <&ssi1 &dvc1 &src1>;
 646                                 capture = <&ssi0>;
 647                         };
 648                 };
 649                 rsnd_port1: port@1 {
 650                     reg = <0x01>;
 651                         rsnd_endpoint1: endpoint {
 652                                 remote-endpoint = <&dw_hdmi0_snd_in>;
 653
 654                                 dai-format = "i2s";
 655                                 bitclock-master = <&rsnd_endpoint1>;
 656                                 frame-master = <&rsnd_endpoint1>;
 657
 658                                 playback = <&ssi2>;
 659                         };
 660                 };
 661         };
 662 };
 663
 664 &rwdt {
 665         status = "okay";
 666         timeout-sec = <60>;
 667 };
 668
 669 &scif0 {
 670         pinctrl-0 = <&scif0_pins>;
 671         pinctrl-names = "default";
 672         status = "okay";
 673 };
 674
 675 &scif5 {
 676         pinctrl-0 = <&scif5_pins>;
 677         pinctrl-names = "default";
 678         status = "okay";
 679 };
 680
 681 &scif_clk {
 682         clock-frequency = <14745600>;
 683 };
 684
 685 &sdhi0 {
 686         pinctrl-0 = <&sdhi0_pins>;
 687         pinctrl-1 = <&sdhi0_pins_uhs>;
 688         pinctrl-names = "default", "state_uhs";
 689         vmmc-supply = <&reg_3p3v>;
 690         vqmmc-supply = <&vccq_sdhi0>;
 691         cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 692         bus-width = <4>;
 693         sd-uhs-sdr50;
 694         sd-uhs-sdr104;
 695         status = "okay";
 696 };
 697
 698 &ssi1 {
 699         shared-pin;
 700 };
 701
 702 &tmu0 {
 703         status = "okay";
 704 };
 705
 706 &tmu1 {
 707         status = "okay";
 708 };
 709
 710 &tmu2 {
 711         status = "okay";
 712 };
 713
 714 &tmu3 {
 715         status = "okay";
 716 };
 717
 718 &tmu4 {
 719         status = "okay";
 720 };
 721
 722 &usb2_phy0 {
 723         pinctrl-0 = <&usb0_pins>;
 724         pinctrl-names = "default";
 725         status = "okay";
 726 };
 727
 728 &usb2_phy1 {
 729         pinctrl-0 = <&usb1_pins>;
 730         pinctrl-names = "default";
 731         status = "okay";
 732 };
 733
 734 &usb3_peri0 {
 735         companion = <&xhci0>;
 736         status = "okay";
 737         usb-role-switch;
 738
 739         ports {
 740                 #address-cells = <1>;
 741                 #size-cells = <0>;
 742                 port@0 {
 743                         reg = <0>;
 744                         usb3_hs_ep: endpoint {
 745                                 remote-endpoint = <&hs_ep>;
 746                         };
 747                 };
 748                 port@1 {
 749                         reg = <1>;
 750                         usb3_role_switch: endpoint {
 751                                 remote-endpoint = <&hd3ss3220_out_ep>;
 752                         };
 753                 };
 754         };
 755 };
 756
 757 &usb3_phy0 {
 758         status = "okay";
 759 };
 760
 761 &vin0 {
 762         status = "okay";
 763 };
 764 &vin1 {
 765         status = "okay";
 766 };
 767 &vin2 {
 768         status = "okay";
 769 };
 770 &vin3 {
 771         status = "okay";
 772 };
 773 &vin4 {
 774         status = "okay";
 775 };
 776 &vin5 {
 777         status = "okay";
 778 };
 779 &vin6 {
 780         status = "okay";
 781 };
 782 &vin7 {
 783         status = "okay";
 784 };
 785
 786 &xhci0
 787 {
 788         pinctrl-0 = <&usb30_pins>;
 789         pinctrl-names = "default";
 790         status = "okay";
 791 };