1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2020, The Linux Foundation. All rights reserved.
6 #include <dt-bindings/interrupt-controller/arm-gic.h>
7 #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
8 #include <dt-bindings/clock/qcom,gcc-sm8250.h>
9 #include <dt-bindings/clock/qcom,gpucc-sm8250.h>
10 #include <dt-bindings/clock/qcom,rpmh.h>
11 #include <dt-bindings/dma/qcom-gpi.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/interconnect/qcom,osm-l3.h>
14 #include <dt-bindings/interconnect/qcom,sm8250.h>
15 #include <dt-bindings/mailbox/qcom-ipcc.h>
16 #include <dt-bindings/power/qcom-rpmpd.h>
17 #include <dt-bindings/soc/qcom,apr.h>
18 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
19 #include <dt-bindings/sound/qcom,q6afe.h>
20 #include <dt-bindings/thermal/thermal.h>
21 #include <dt-bindings/clock/qcom,camcc-sm8250.h>
22 #include <dt-bindings/clock/qcom,videocc-sm8250.h>
25 interrupt-parent = <&intc>;
77 compatible = "fixed-clock";
79 clock-frequency = <38400000>;
80 clock-output-names = "xo_board";
83 sleep_clk: sleep-clk {
84 compatible = "fixed-clock";
85 clock-frequency = <32768>;
96 compatible = "qcom,kryo485";
98 enable-method = "psci";
99 capacity-dmips-mhz = <448>;
100 dynamic-power-coefficient = <205>;
101 next-level-cache = <&L2_0>;
102 power-domains = <&CPU_PD0>;
103 power-domain-names = "psci";
104 qcom,freq-domain = <&cpufreq_hw 0>;
105 operating-points-v2 = <&cpu0_opp_table>;
106 interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
107 <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
108 #cooling-cells = <2>;
110 compatible = "cache";
111 next-level-cache = <&L3_0>;
113 compatible = "cache";
120 compatible = "qcom,kryo485";
122 enable-method = "psci";
123 capacity-dmips-mhz = <448>;
124 dynamic-power-coefficient = <205>;
125 next-level-cache = <&L2_100>;
126 power-domains = <&CPU_PD1>;
127 power-domain-names = "psci";
128 qcom,freq-domain = <&cpufreq_hw 0>;
129 operating-points-v2 = <&cpu0_opp_table>;
130 interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
131 <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
132 #cooling-cells = <2>;
134 compatible = "cache";
135 next-level-cache = <&L3_0>;
141 compatible = "qcom,kryo485";
143 enable-method = "psci";
144 capacity-dmips-mhz = <448>;
145 dynamic-power-coefficient = <205>;
146 next-level-cache = <&L2_200>;
147 power-domains = <&CPU_PD2>;
148 power-domain-names = "psci";
149 qcom,freq-domain = <&cpufreq_hw 0>;
150 operating-points-v2 = <&cpu0_opp_table>;
151 interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
152 <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
153 #cooling-cells = <2>;
155 compatible = "cache";
156 next-level-cache = <&L3_0>;
162 compatible = "qcom,kryo485";
164 enable-method = "psci";
165 capacity-dmips-mhz = <448>;
166 dynamic-power-coefficient = <205>;
167 next-level-cache = <&L2_300>;
168 power-domains = <&CPU_PD3>;
169 power-domain-names = "psci";
170 qcom,freq-domain = <&cpufreq_hw 0>;
171 operating-points-v2 = <&cpu0_opp_table>;
172 interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
173 <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
174 #cooling-cells = <2>;
176 compatible = "cache";
177 next-level-cache = <&L3_0>;
183 compatible = "qcom,kryo485";
185 enable-method = "psci";
186 capacity-dmips-mhz = <1024>;
187 dynamic-power-coefficient = <379>;
188 next-level-cache = <&L2_400>;
189 power-domains = <&CPU_PD4>;
190 power-domain-names = "psci";
191 qcom,freq-domain = <&cpufreq_hw 1>;
192 operating-points-v2 = <&cpu4_opp_table>;
193 interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
194 <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
195 #cooling-cells = <2>;
197 compatible = "cache";
198 next-level-cache = <&L3_0>;
204 compatible = "qcom,kryo485";
206 enable-method = "psci";
207 capacity-dmips-mhz = <1024>;
208 dynamic-power-coefficient = <379>;
209 next-level-cache = <&L2_500>;
210 power-domains = <&CPU_PD5>;
211 power-domain-names = "psci";
212 qcom,freq-domain = <&cpufreq_hw 1>;
213 operating-points-v2 = <&cpu4_opp_table>;
214 interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
215 <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
216 #cooling-cells = <2>;
218 compatible = "cache";
219 next-level-cache = <&L3_0>;
226 compatible = "qcom,kryo485";
228 enable-method = "psci";
229 capacity-dmips-mhz = <1024>;
230 dynamic-power-coefficient = <379>;
231 next-level-cache = <&L2_600>;
232 power-domains = <&CPU_PD6>;
233 power-domain-names = "psci";
234 qcom,freq-domain = <&cpufreq_hw 1>;
235 operating-points-v2 = <&cpu4_opp_table>;
236 interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
237 <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
238 #cooling-cells = <2>;
240 compatible = "cache";
241 next-level-cache = <&L3_0>;
247 compatible = "qcom,kryo485";
249 enable-method = "psci";
250 capacity-dmips-mhz = <1024>;
251 dynamic-power-coefficient = <444>;
252 next-level-cache = <&L2_700>;
253 power-domains = <&CPU_PD7>;
254 power-domain-names = "psci";
255 qcom,freq-domain = <&cpufreq_hw 2>;
256 operating-points-v2 = <&cpu7_opp_table>;
257 interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
258 <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
259 #cooling-cells = <2>;
261 compatible = "cache";
262 next-level-cache = <&L3_0>;
303 entry-method = "psci";
305 LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
306 compatible = "arm,idle-state";
307 idle-state-name = "silver-rail-power-collapse";
308 arm,psci-suspend-param = <0x40000004>;
309 entry-latency-us = <360>;
310 exit-latency-us = <531>;
311 min-residency-us = <3934>;
315 BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
316 compatible = "arm,idle-state";
317 idle-state-name = "gold-rail-power-collapse";
318 arm,psci-suspend-param = <0x40000004>;
319 entry-latency-us = <702>;
320 exit-latency-us = <1061>;
321 min-residency-us = <4488>;
327 CLUSTER_SLEEP_0: cluster-sleep-0 {
328 compatible = "domain-idle-state";
329 idle-state-name = "cluster-llcc-off";
330 arm,psci-suspend-param = <0x4100c244>;
331 entry-latency-us = <3264>;
332 exit-latency-us = <6562>;
333 min-residency-us = <9987>;
339 cpu0_opp_table: cpu0_opp_table {
340 compatible = "operating-points-v2";
343 cpu0_opp1: opp-300000000 {
344 opp-hz = /bits/ 64 <300000000>;
345 opp-peak-kBps = <800000 9600000>;
348 cpu0_opp2: opp-403200000 {
349 opp-hz = /bits/ 64 <403200000>;
350 opp-peak-kBps = <800000 9600000>;
353 cpu0_opp3: opp-518400000 {
354 opp-hz = /bits/ 64 <518400000>;
355 opp-peak-kBps = <800000 16588800>;
358 cpu0_opp4: opp-614400000 {
359 opp-hz = /bits/ 64 <614400000>;
360 opp-peak-kBps = <800000 16588800>;
363 cpu0_opp5: opp-691200000 {
364 opp-hz = /bits/ 64 <691200000>;
365 opp-peak-kBps = <800000 19660800>;
368 cpu0_opp6: opp-787200000 {
369 opp-hz = /bits/ 64 <787200000>;
370 opp-peak-kBps = <1804000 19660800>;
373 cpu0_opp7: opp-883200000 {
374 opp-hz = /bits/ 64 <883200000>;
375 opp-peak-kBps = <1804000 23347200>;
378 cpu0_opp8: opp-979200000 {
379 opp-hz = /bits/ 64 <979200000>;
380 opp-peak-kBps = <1804000 26419200>;
383 cpu0_opp9: opp-1075200000 {
384 opp-hz = /bits/ 64 <1075200000>;
385 opp-peak-kBps = <1804000 29491200>;
388 cpu0_opp10: opp-1171200000 {
389 opp-hz = /bits/ 64 <1171200000>;
390 opp-peak-kBps = <1804000 32563200>;
393 cpu0_opp11: opp-1248000000 {
394 opp-hz = /bits/ 64 <1248000000>;
395 opp-peak-kBps = <1804000 36249600>;
398 cpu0_opp12: opp-1344000000 {
399 opp-hz = /bits/ 64 <1344000000>;
400 opp-peak-kBps = <2188000 36249600>;
403 cpu0_opp13: opp-1420800000 {
404 opp-hz = /bits/ 64 <1420800000>;
405 opp-peak-kBps = <2188000 39321600>;
408 cpu0_opp14: opp-1516800000 {
409 opp-hz = /bits/ 64 <1516800000>;
410 opp-peak-kBps = <3072000 42393600>;
413 cpu0_opp15: opp-1612800000 {
414 opp-hz = /bits/ 64 <1612800000>;
415 opp-peak-kBps = <3072000 42393600>;
418 cpu0_opp16: opp-1708800000 {
419 opp-hz = /bits/ 64 <1708800000>;
420 opp-peak-kBps = <4068000 42393600>;
423 cpu0_opp17: opp-1804800000 {
424 opp-hz = /bits/ 64 <1804800000>;
425 opp-peak-kBps = <4068000 42393600>;
429 cpu4_opp_table: cpu4_opp_table {
430 compatible = "operating-points-v2";
433 cpu4_opp1: opp-710400000 {
434 opp-hz = /bits/ 64 <710400000>;
435 opp-peak-kBps = <1804000 19660800>;
438 cpu4_opp2: opp-825600000 {
439 opp-hz = /bits/ 64 <825600000>;
440 opp-peak-kBps = <2188000 23347200>;
443 cpu4_opp3: opp-940800000 {
444 opp-hz = /bits/ 64 <940800000>;
445 opp-peak-kBps = <2188000 26419200>;
448 cpu4_opp4: opp-1056000000 {
449 opp-hz = /bits/ 64 <1056000000>;
450 opp-peak-kBps = <3072000 26419200>;
453 cpu4_opp5: opp-1171200000 {
454 opp-hz = /bits/ 64 <1171200000>;
455 opp-peak-kBps = <3072000 29491200>;
458 cpu4_opp6: opp-1286400000 {
459 opp-hz = /bits/ 64 <1286400000>;
460 opp-peak-kBps = <4068000 29491200>;
463 cpu4_opp7: opp-1382400000 {
464 opp-hz = /bits/ 64 <1382400000>;
465 opp-peak-kBps = <4068000 32563200>;
468 cpu4_opp8: opp-1478400000 {
469 opp-hz = /bits/ 64 <1478400000>;
470 opp-peak-kBps = <4068000 32563200>;
473 cpu4_opp9: opp-1574400000 {
474 opp-hz = /bits/ 64 <1574400000>;
475 opp-peak-kBps = <5412000 39321600>;
478 cpu4_opp10: opp-1670400000 {
479 opp-hz = /bits/ 64 <1670400000>;
480 opp-peak-kBps = <5412000 42393600>;
483 cpu4_opp11: opp-1766400000 {
484 opp-hz = /bits/ 64 <1766400000>;
485 opp-peak-kBps = <5412000 45465600>;
488 cpu4_opp12: opp-1862400000 {
489 opp-hz = /bits/ 64 <1862400000>;
490 opp-peak-kBps = <6220000 45465600>;
493 cpu4_opp13: opp-1958400000 {
494 opp-hz = /bits/ 64 <1958400000>;
495 opp-peak-kBps = <6220000 48537600>;
498 cpu4_opp14: opp-2054400000 {
499 opp-hz = /bits/ 64 <2054400000>;
500 opp-peak-kBps = <7216000 48537600>;
503 cpu4_opp15: opp-2150400000 {
504 opp-hz = /bits/ 64 <2150400000>;
505 opp-peak-kBps = <7216000 51609600>;
508 cpu4_opp16: opp-2246400000 {
509 opp-hz = /bits/ 64 <2246400000>;
510 opp-peak-kBps = <7216000 51609600>;
513 cpu4_opp17: opp-2342400000 {
514 opp-hz = /bits/ 64 <2342400000>;
515 opp-peak-kBps = <8368000 51609600>;
518 cpu4_opp18: opp-2419200000 {
519 opp-hz = /bits/ 64 <2419200000>;
520 opp-peak-kBps = <8368000 51609600>;
524 cpu7_opp_table: cpu7_opp_table {
525 compatible = "operating-points-v2";
528 cpu7_opp1: opp-844800000 {
529 opp-hz = /bits/ 64 <844800000>;
530 opp-peak-kBps = <2188000 19660800>;
533 cpu7_opp2: opp-960000000 {
534 opp-hz = /bits/ 64 <960000000>;
535 opp-peak-kBps = <2188000 26419200>;
538 cpu7_opp3: opp-1075200000 {
539 opp-hz = /bits/ 64 <1075200000>;
540 opp-peak-kBps = <3072000 26419200>;
543 cpu7_opp4: opp-1190400000 {
544 opp-hz = /bits/ 64 <1190400000>;
545 opp-peak-kBps = <3072000 29491200>;
548 cpu7_opp5: opp-1305600000 {
549 opp-hz = /bits/ 64 <1305600000>;
550 opp-peak-kBps = <4068000 32563200>;
553 cpu7_opp6: opp-1401600000 {
554 opp-hz = /bits/ 64 <1401600000>;
555 opp-peak-kBps = <4068000 32563200>;
558 cpu7_opp7: opp-1516800000 {
559 opp-hz = /bits/ 64 <1516800000>;
560 opp-peak-kBps = <4068000 36249600>;
563 cpu7_opp8: opp-1632000000 {
564 opp-hz = /bits/ 64 <1632000000>;
565 opp-peak-kBps = <5412000 39321600>;
568 cpu7_opp9: opp-1747200000 {
569 opp-hz = /bits/ 64 <1708800000>;
570 opp-peak-kBps = <5412000 42393600>;
573 cpu7_opp10: opp-1862400000 {
574 opp-hz = /bits/ 64 <1862400000>;
575 opp-peak-kBps = <6220000 45465600>;
578 cpu7_opp11: opp-1977600000 {
579 opp-hz = /bits/ 64 <1977600000>;
580 opp-peak-kBps = <6220000 48537600>;
583 cpu7_opp12: opp-2073600000 {
584 opp-hz = /bits/ 64 <2073600000>;
585 opp-peak-kBps = <7216000 48537600>;
588 cpu7_opp13: opp-2169600000 {
589 opp-hz = /bits/ 64 <2169600000>;
590 opp-peak-kBps = <7216000 51609600>;
593 cpu7_opp14: opp-2265600000 {
594 opp-hz = /bits/ 64 <2265600000>;
595 opp-peak-kBps = <7216000 51609600>;
598 cpu7_opp15: opp-2361600000 {
599 opp-hz = /bits/ 64 <2361600000>;
600 opp-peak-kBps = <8368000 51609600>;
603 cpu7_opp16: opp-2457600000 {
604 opp-hz = /bits/ 64 <2457600000>;
605 opp-peak-kBps = <8368000 51609600>;
608 cpu7_opp17: opp-2553600000 {
609 opp-hz = /bits/ 64 <2553600000>;
610 opp-peak-kBps = <8368000 51609600>;
613 cpu7_opp18: opp-2649600000 {
614 opp-hz = /bits/ 64 <2649600000>;
615 opp-peak-kBps = <8368000 51609600>;
618 cpu7_opp19: opp-2745600000 {
619 opp-hz = /bits/ 64 <2745600000>;
620 opp-peak-kBps = <8368000 51609600>;
623 cpu7_opp20: opp-2841600000 {
624 opp-hz = /bits/ 64 <2841600000>;
625 opp-peak-kBps = <8368000 51609600>;
631 compatible = "qcom,scm";
637 device_type = "memory";
638 /* We expect the bootloader to fill in the size */
639 reg = <0x0 0x80000000 0x0 0x0>;
643 compatible = "arm,armv8-pmuv3";
644 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
648 compatible = "arm,psci-1.0";
652 #power-domain-cells = <0>;
653 power-domains = <&CLUSTER_PD>;
654 domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
658 #power-domain-cells = <0>;
659 power-domains = <&CLUSTER_PD>;
660 domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
664 #power-domain-cells = <0>;
665 power-domains = <&CLUSTER_PD>;
666 domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
670 #power-domain-cells = <0>;
671 power-domains = <&CLUSTER_PD>;
672 domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
676 #power-domain-cells = <0>;
677 power-domains = <&CLUSTER_PD>;
678 domain-idle-states = <&BIG_CPU_SLEEP_0>;
682 #power-domain-cells = <0>;
683 power-domains = <&CLUSTER_PD>;
684 domain-idle-states = <&BIG_CPU_SLEEP_0>;
688 #power-domain-cells = <0>;
689 power-domains = <&CLUSTER_PD>;
690 domain-idle-states = <&BIG_CPU_SLEEP_0>;
694 #power-domain-cells = <0>;
695 power-domains = <&CLUSTER_PD>;
696 domain-idle-states = <&BIG_CPU_SLEEP_0>;
699 CLUSTER_PD: cpu-cluster0 {
700 #power-domain-cells = <0>;
701 domain-idle-states = <&CLUSTER_SLEEP_0>;
706 #address-cells = <2>;
710 hyp_mem: memory@80000000 {
711 reg = <0x0 0x80000000 0x0 0x600000>;
715 xbl_aop_mem: memory@80700000 {
716 reg = <0x0 0x80700000 0x0 0x160000>;
720 cmd_db: memory@80860000 {
721 compatible = "qcom,cmd-db";
722 reg = <0x0 0x80860000 0x0 0x20000>;
726 smem_mem: memory@80900000 {
727 reg = <0x0 0x80900000 0x0 0x200000>;
731 removed_mem: memory@80b00000 {
732 reg = <0x0 0x80b00000 0x0 0x5300000>;
736 camera_mem: memory@86200000 {
737 reg = <0x0 0x86200000 0x0 0x500000>;
741 wlan_mem: memory@86700000 {
742 reg = <0x0 0x86700000 0x0 0x100000>;
746 ipa_fw_mem: memory@86800000 {
747 reg = <0x0 0x86800000 0x0 0x10000>;
751 ipa_gsi_mem: memory@86810000 {
752 reg = <0x0 0x86810000 0x0 0xa000>;
756 gpu_mem: memory@8681a000 {
757 reg = <0x0 0x8681a000 0x0 0x2000>;
761 npu_mem: memory@86900000 {
762 reg = <0x0 0x86900000 0x0 0x500000>;
766 video_mem: memory@86e00000 {
767 reg = <0x0 0x86e00000 0x0 0x500000>;
771 cvp_mem: memory@87300000 {
772 reg = <0x0 0x87300000 0x0 0x500000>;
776 cdsp_mem: memory@87800000 {
777 reg = <0x0 0x87800000 0x0 0x1400000>;
781 slpi_mem: memory@88c00000 {
782 reg = <0x0 0x88c00000 0x0 0x1500000>;
786 adsp_mem: memory@8a100000 {
787 reg = <0x0 0x8a100000 0x0 0x1d00000>;
791 spss_mem: memory@8be00000 {
792 reg = <0x0 0x8be00000 0x0 0x100000>;
796 cdsp_secure_heap: memory@8bf00000 {
797 reg = <0x0 0x8bf00000 0x0 0x4600000>;
803 compatible = "qcom,smem";
804 memory-region = <&smem_mem>;
805 hwlocks = <&tcsr_mutex 3>;
809 compatible = "qcom,smp2p";
810 qcom,smem = <443>, <429>;
811 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
812 IPCC_MPROC_SIGNAL_SMP2P
813 IRQ_TYPE_EDGE_RISING>;
814 mboxes = <&ipcc IPCC_CLIENT_LPASS
815 IPCC_MPROC_SIGNAL_SMP2P>;
817 qcom,local-pid = <0>;
818 qcom,remote-pid = <2>;
820 smp2p_adsp_out: master-kernel {
821 qcom,entry-name = "master-kernel";
822 #qcom,smem-state-cells = <1>;
825 smp2p_adsp_in: slave-kernel {
826 qcom,entry-name = "slave-kernel";
827 interrupt-controller;
828 #interrupt-cells = <2>;
833 compatible = "qcom,smp2p";
834 qcom,smem = <94>, <432>;
835 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
836 IPCC_MPROC_SIGNAL_SMP2P
837 IRQ_TYPE_EDGE_RISING>;
838 mboxes = <&ipcc IPCC_CLIENT_CDSP
839 IPCC_MPROC_SIGNAL_SMP2P>;
841 qcom,local-pid = <0>;
842 qcom,remote-pid = <5>;
844 smp2p_cdsp_out: master-kernel {
845 qcom,entry-name = "master-kernel";
846 #qcom,smem-state-cells = <1>;
849 smp2p_cdsp_in: slave-kernel {
850 qcom,entry-name = "slave-kernel";
851 interrupt-controller;
852 #interrupt-cells = <2>;
857 compatible = "qcom,smp2p";
858 qcom,smem = <481>, <430>;
859 interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
860 IPCC_MPROC_SIGNAL_SMP2P
861 IRQ_TYPE_EDGE_RISING>;
862 mboxes = <&ipcc IPCC_CLIENT_SLPI
863 IPCC_MPROC_SIGNAL_SMP2P>;
865 qcom,local-pid = <0>;
866 qcom,remote-pid = <3>;
868 smp2p_slpi_out: master-kernel {
869 qcom,entry-name = "master-kernel";
870 #qcom,smem-state-cells = <1>;
873 smp2p_slpi_in: slave-kernel {
874 qcom,entry-name = "slave-kernel";
875 interrupt-controller;
876 #interrupt-cells = <2>;
881 #address-cells = <2>;
883 ranges = <0 0 0 0 0x10 0>;
884 dma-ranges = <0 0 0 0 0x10 0>;
885 compatible = "simple-bus";
887 gcc: clock-controller@100000 {
888 compatible = "qcom,gcc-sm8250";
889 reg = <0x0 0x00100000 0x0 0x1f0000>;
892 #power-domain-cells = <1>;
893 clock-names = "bi_tcxo",
896 clocks = <&rpmhcc RPMH_CXO_CLK>,
897 <&rpmhcc RPMH_CXO_CLK_A>,
901 ipcc: mailbox@408000 {
902 compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
903 reg = <0 0x00408000 0 0x1000>;
904 interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
905 interrupt-controller;
906 #interrupt-cells = <3>;
911 compatible = "qcom,prng-ee";
912 reg = <0 0x00793000 0 0x1000>;
913 clocks = <&gcc GCC_PRNG_AHB_CLK>;
914 clock-names = "core";
917 qup_opp_table: qup-opp-table {
918 compatible = "operating-points-v2";
921 opp-hz = /bits/ 64 <50000000>;
922 required-opps = <&rpmhpd_opp_min_svs>;
926 opp-hz = /bits/ 64 <75000000>;
927 required-opps = <&rpmhpd_opp_low_svs>;
931 opp-hz = /bits/ 64 <120000000>;
932 required-opps = <&rpmhpd_opp_svs>;
936 gpi_dma2: dma-controller@800000 {
937 compatible = "qcom,sm8250-gpi-dma";
938 reg = <0 0x00800000 0 0x70000>;
939 interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
940 <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
941 <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
942 <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
943 <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
944 <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
945 <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
946 <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
947 <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
948 <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
950 dma-channel-mask = <0x3f>;
951 iommus = <&apps_smmu 0x76 0x0>;
956 qupv3_id_2: geniqup@8c0000 {
957 compatible = "qcom,geni-se-qup";
958 reg = <0x0 0x008c0000 0x0 0x6000>;
959 clock-names = "m-ahb", "s-ahb";
960 clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
961 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
962 #address-cells = <2>;
964 iommus = <&apps_smmu 0x63 0x0>;
969 compatible = "qcom,geni-i2c";
970 reg = <0 0x00880000 0 0x4000>;
972 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
973 pinctrl-names = "default";
974 pinctrl-0 = <&qup_i2c14_default>;
975 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
976 dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
977 <&gpi_dma2 1 0 QCOM_GPI_I2C>;
978 dma-names = "tx", "rx";
979 #address-cells = <1>;
985 compatible = "qcom,geni-spi";
986 reg = <0 0x00880000 0 0x4000>;
988 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
989 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
990 dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
991 <&gpi_dma2 1 0 QCOM_GPI_SPI>;
992 dma-names = "tx", "rx";
993 power-domains = <&rpmhpd SM8250_CX>;
994 operating-points-v2 = <&qup_opp_table>;
995 #address-cells = <1>;
1001 compatible = "qcom,geni-i2c";
1002 reg = <0 0x00884000 0 0x4000>;
1004 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
1005 pinctrl-names = "default";
1006 pinctrl-0 = <&qup_i2c15_default>;
1007 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
1008 dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
1009 <&gpi_dma2 1 1 QCOM_GPI_I2C>;
1010 dma-names = "tx", "rx";
1011 #address-cells = <1>;
1013 status = "disabled";
1017 compatible = "qcom,geni-spi";
1018 reg = <0 0x00884000 0 0x4000>;
1020 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
1021 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
1022 dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
1023 <&gpi_dma2 1 1 QCOM_GPI_SPI>;
1024 dma-names = "tx", "rx";
1025 power-domains = <&rpmhpd SM8250_CX>;
1026 operating-points-v2 = <&qup_opp_table>;
1027 #address-cells = <1>;
1029 status = "disabled";
1033 compatible = "qcom,geni-i2c";
1034 reg = <0 0x00888000 0 0x4000>;
1036 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
1037 pinctrl-names = "default";
1038 pinctrl-0 = <&qup_i2c16_default>;
1039 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
1040 dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
1041 <&gpi_dma2 1 2 QCOM_GPI_I2C>;
1042 dma-names = "tx", "rx";
1043 #address-cells = <1>;
1045 status = "disabled";
1049 compatible = "qcom,geni-spi";
1050 reg = <0 0x00888000 0 0x4000>;
1052 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
1053 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
1054 dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
1055 <&gpi_dma2 1 2 QCOM_GPI_SPI>;
1056 dma-names = "tx", "rx";
1057 power-domains = <&rpmhpd SM8250_CX>;
1058 operating-points-v2 = <&qup_opp_table>;
1059 #address-cells = <1>;
1061 status = "disabled";
1065 compatible = "qcom,geni-i2c";
1066 reg = <0 0x0088c000 0 0x4000>;
1068 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
1069 pinctrl-names = "default";
1070 pinctrl-0 = <&qup_i2c17_default>;
1071 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
1072 dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
1073 <&gpi_dma2 1 3 QCOM_GPI_I2C>;
1074 dma-names = "tx", "rx";
1075 #address-cells = <1>;
1077 status = "disabled";
1081 compatible = "qcom,geni-spi";
1082 reg = <0 0x0088c000 0 0x4000>;
1084 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
1085 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
1086 dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
1087 <&gpi_dma2 1 3 QCOM_GPI_SPI>;
1088 dma-names = "tx", "rx";
1089 power-domains = <&rpmhpd SM8250_CX>;
1090 operating-points-v2 = <&qup_opp_table>;
1091 #address-cells = <1>;
1093 status = "disabled";
1096 uart17: serial@88c000 {
1097 compatible = "qcom,geni-uart";
1098 reg = <0 0x0088c000 0 0x4000>;
1100 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
1101 pinctrl-names = "default";
1102 pinctrl-0 = <&qup_uart17_default>;
1103 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
1104 power-domains = <&rpmhpd SM8250_CX>;
1105 operating-points-v2 = <&qup_opp_table>;
1106 status = "disabled";
1110 compatible = "qcom,geni-i2c";
1111 reg = <0 0x00890000 0 0x4000>;
1113 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1114 pinctrl-names = "default";
1115 pinctrl-0 = <&qup_i2c18_default>;
1116 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1117 dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
1118 <&gpi_dma2 1 4 QCOM_GPI_I2C>;
1119 dma-names = "tx", "rx";
1120 #address-cells = <1>;
1122 status = "disabled";
1126 compatible = "qcom,geni-spi";
1127 reg = <0 0x00890000 0 0x4000>;
1129 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1130 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1131 dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
1132 <&gpi_dma2 1 4 QCOM_GPI_SPI>;
1133 dma-names = "tx", "rx";
1134 power-domains = <&rpmhpd SM8250_CX>;
1135 operating-points-v2 = <&qup_opp_table>;
1136 #address-cells = <1>;
1138 status = "disabled";
1141 uart18: serial@890000 {
1142 compatible = "qcom,geni-uart";
1143 reg = <0 0x00890000 0 0x4000>;
1145 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1146 pinctrl-names = "default";
1147 pinctrl-0 = <&qup_uart18_default>;
1148 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1149 power-domains = <&rpmhpd SM8250_CX>;
1150 operating-points-v2 = <&qup_opp_table>;
1151 status = "disabled";
1155 compatible = "qcom,geni-i2c";
1156 reg = <0 0x00894000 0 0x4000>;
1158 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1159 pinctrl-names = "default";
1160 pinctrl-0 = <&qup_i2c19_default>;
1161 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1162 dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
1163 <&gpi_dma2 1 5 QCOM_GPI_I2C>;
1164 dma-names = "tx", "rx";
1165 #address-cells = <1>;
1167 status = "disabled";
1171 compatible = "qcom,geni-spi";
1172 reg = <0 0x00894000 0 0x4000>;
1174 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1175 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1176 dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
1177 <&gpi_dma2 1 5 QCOM_GPI_SPI>;
1178 dma-names = "tx", "rx";
1179 power-domains = <&rpmhpd SM8250_CX>;
1180 operating-points-v2 = <&qup_opp_table>;
1181 #address-cells = <1>;
1183 status = "disabled";
1187 gpi_dma0: dma-controller@900000 {
1188 compatible = "qcom,sm8250-gpi-dma";
1189 reg = <0 0x00900000 0 0x70000>;
1190 interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
1191 <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
1192 <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
1193 <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
1194 <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
1195 <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
1196 <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
1197 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
1198 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
1199 <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
1200 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
1201 <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
1202 <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
1203 dma-channels = <15>;
1204 dma-channel-mask = <0x7ff>;
1205 iommus = <&apps_smmu 0x5b6 0x0>;
1207 status = "disabled";
1210 qupv3_id_0: geniqup@9c0000 {
1211 compatible = "qcom,geni-se-qup";
1212 reg = <0x0 0x009c0000 0x0 0x6000>;
1213 clock-names = "m-ahb", "s-ahb";
1214 clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
1215 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
1216 #address-cells = <2>;
1218 iommus = <&apps_smmu 0x5a3 0x0>;
1220 status = "disabled";
1223 compatible = "qcom,geni-i2c";
1224 reg = <0 0x00980000 0 0x4000>;
1226 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1227 pinctrl-names = "default";
1228 pinctrl-0 = <&qup_i2c0_default>;
1229 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
1230 dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
1231 <&gpi_dma0 1 0 QCOM_GPI_I2C>;
1232 dma-names = "tx", "rx";
1233 #address-cells = <1>;
1235 status = "disabled";
1239 compatible = "qcom,geni-spi";
1240 reg = <0 0x00980000 0 0x4000>;
1242 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1243 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
1244 dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
1245 <&gpi_dma0 1 0 QCOM_GPI_SPI>;
1246 dma-names = "tx", "rx";
1247 power-domains = <&rpmhpd SM8250_CX>;
1248 operating-points-v2 = <&qup_opp_table>;
1249 #address-cells = <1>;
1251 status = "disabled";
1255 compatible = "qcom,geni-i2c";
1256 reg = <0 0x00984000 0 0x4000>;
1258 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1259 pinctrl-names = "default";
1260 pinctrl-0 = <&qup_i2c1_default>;
1261 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
1262 dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
1263 <&gpi_dma0 1 1 QCOM_GPI_I2C>;
1264 dma-names = "tx", "rx";
1265 #address-cells = <1>;
1267 status = "disabled";
1271 compatible = "qcom,geni-spi";
1272 reg = <0 0x00984000 0 0x4000>;
1274 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1275 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
1276 dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
1277 <&gpi_dma0 1 1 QCOM_GPI_SPI>;
1278 dma-names = "tx", "rx";
1279 power-domains = <&rpmhpd SM8250_CX>;
1280 operating-points-v2 = <&qup_opp_table>;
1281 #address-cells = <1>;
1283 status = "disabled";
1287 compatible = "qcom,geni-i2c";
1288 reg = <0 0x00988000 0 0x4000>;
1290 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1291 pinctrl-names = "default";
1292 pinctrl-0 = <&qup_i2c2_default>;
1293 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1294 dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
1295 <&gpi_dma0 1 2 QCOM_GPI_I2C>;
1296 dma-names = "tx", "rx";
1297 #address-cells = <1>;
1299 status = "disabled";
1303 compatible = "qcom,geni-spi";
1304 reg = <0 0x00988000 0 0x4000>;
1306 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1307 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1308 dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
1309 <&gpi_dma0 1 2 QCOM_GPI_SPI>;
1310 dma-names = "tx", "rx";
1311 power-domains = <&rpmhpd SM8250_CX>;
1312 operating-points-v2 = <&qup_opp_table>;
1313 #address-cells = <1>;
1315 status = "disabled";
1318 uart2: serial@988000 {
1319 compatible = "qcom,geni-debug-uart";
1320 reg = <0 0x00988000 0 0x4000>;
1322 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1323 pinctrl-names = "default";
1324 pinctrl-0 = <&qup_uart2_default>;
1325 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1326 power-domains = <&rpmhpd SM8250_CX>;
1327 operating-points-v2 = <&qup_opp_table>;
1328 status = "disabled";
1332 compatible = "qcom,geni-i2c";
1333 reg = <0 0x0098c000 0 0x4000>;
1335 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1336 pinctrl-names = "default";
1337 pinctrl-0 = <&qup_i2c3_default>;
1338 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1339 dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
1340 <&gpi_dma0 1 3 QCOM_GPI_I2C>;
1341 dma-names = "tx", "rx";
1342 #address-cells = <1>;
1344 status = "disabled";
1348 compatible = "qcom,geni-spi";
1349 reg = <0 0x0098c000 0 0x4000>;
1351 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1352 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1353 dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
1354 <&gpi_dma0 1 3 QCOM_GPI_SPI>;
1355 dma-names = "tx", "rx";
1356 power-domains = <&rpmhpd SM8250_CX>;
1357 operating-points-v2 = <&qup_opp_table>;
1358 #address-cells = <1>;
1360 status = "disabled";
1364 compatible = "qcom,geni-i2c";
1365 reg = <0 0x00990000 0 0x4000>;
1367 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1368 pinctrl-names = "default";
1369 pinctrl-0 = <&qup_i2c4_default>;
1370 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1371 dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
1372 <&gpi_dma0 1 4 QCOM_GPI_I2C>;
1373 dma-names = "tx", "rx";
1374 #address-cells = <1>;
1376 status = "disabled";
1380 compatible = "qcom,geni-spi";
1381 reg = <0 0x00990000 0 0x4000>;
1383 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1384 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1385 dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
1386 <&gpi_dma0 1 4 QCOM_GPI_SPI>;
1387 dma-names = "tx", "rx";
1388 power-domains = <&rpmhpd SM8250_CX>;
1389 operating-points-v2 = <&qup_opp_table>;
1390 #address-cells = <1>;
1392 status = "disabled";
1396 compatible = "qcom,geni-i2c";
1397 reg = <0 0x00994000 0 0x4000>;
1399 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1400 pinctrl-names = "default";
1401 pinctrl-0 = <&qup_i2c5_default>;
1402 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1403 dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
1404 <&gpi_dma0 1 5 QCOM_GPI_I2C>;
1405 dma-names = "tx", "rx";
1406 #address-cells = <1>;
1408 status = "disabled";
1412 compatible = "qcom,geni-spi";
1413 reg = <0 0x00994000 0 0x4000>;
1415 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1416 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1417 dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
1418 <&gpi_dma0 1 5 QCOM_GPI_SPI>;
1419 dma-names = "tx", "rx";
1420 power-domains = <&rpmhpd SM8250_CX>;
1421 operating-points-v2 = <&qup_opp_table>;
1422 #address-cells = <1>;
1424 status = "disabled";
1428 compatible = "qcom,geni-i2c";
1429 reg = <0 0x00998000 0 0x4000>;
1431 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1432 pinctrl-names = "default";
1433 pinctrl-0 = <&qup_i2c6_default>;
1434 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1435 dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
1436 <&gpi_dma0 1 6 QCOM_GPI_I2C>;
1437 dma-names = "tx", "rx";
1438 #address-cells = <1>;
1440 status = "disabled";
1444 compatible = "qcom,geni-spi";
1445 reg = <0 0x00998000 0 0x4000>;
1447 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1448 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1449 dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
1450 <&gpi_dma0 1 6 QCOM_GPI_SPI>;
1451 dma-names = "tx", "rx";
1452 power-domains = <&rpmhpd SM8250_CX>;
1453 operating-points-v2 = <&qup_opp_table>;
1454 #address-cells = <1>;
1456 status = "disabled";
1459 uart6: serial@998000 {
1460 compatible = "qcom,geni-uart";
1461 reg = <0 0x00998000 0 0x4000>;
1463 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1464 pinctrl-names = "default";
1465 pinctrl-0 = <&qup_uart6_default>;
1466 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1467 power-domains = <&rpmhpd SM8250_CX>;
1468 operating-points-v2 = <&qup_opp_table>;
1469 status = "disabled";
1473 compatible = "qcom,geni-i2c";
1474 reg = <0 0x0099c000 0 0x4000>;
1476 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1477 pinctrl-names = "default";
1478 pinctrl-0 = <&qup_i2c7_default>;
1479 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1480 dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
1481 <&gpi_dma0 1 7 QCOM_GPI_I2C>;
1482 dma-names = "tx", "rx";
1483 #address-cells = <1>;
1485 status = "disabled";
1489 compatible = "qcom,geni-spi";
1490 reg = <0 0x0099c000 0 0x4000>;
1492 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1493 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1494 dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
1495 <&gpi_dma0 1 7 QCOM_GPI_SPI>;
1496 dma-names = "tx", "rx";
1497 power-domains = <&rpmhpd SM8250_CX>;
1498 operating-points-v2 = <&qup_opp_table>;
1499 #address-cells = <1>;
1501 status = "disabled";
1505 gpi_dma1: dma-controller@a00000 {
1506 compatible = "qcom,sm8250-gpi-dma";
1507 reg = <0 0x00a00000 0 0x70000>;
1508 interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
1509 <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
1510 <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
1511 <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
1512 <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
1513 <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
1514 <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
1515 <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
1516 <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
1517 <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
1518 dma-channels = <10>;
1519 dma-channel-mask = <0x3f>;
1520 iommus = <&apps_smmu 0x56 0x0>;
1522 status = "disabled";
1525 qupv3_id_1: geniqup@ac0000 {
1526 compatible = "qcom,geni-se-qup";
1527 reg = <0x0 0x00ac0000 0x0 0x6000>;
1528 clock-names = "m-ahb", "s-ahb";
1529 clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1530 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1531 #address-cells = <2>;
1533 iommus = <&apps_smmu 0x43 0x0>;
1535 status = "disabled";
1538 compatible = "qcom,geni-i2c";
1539 reg = <0 0x00a80000 0 0x4000>;
1541 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1542 pinctrl-names = "default";
1543 pinctrl-0 = <&qup_i2c8_default>;
1544 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1545 dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
1546 <&gpi_dma1 1 0 QCOM_GPI_I2C>;
1547 dma-names = "tx", "rx";
1548 #address-cells = <1>;
1550 status = "disabled";
1554 compatible = "qcom,geni-spi";
1555 reg = <0 0x00a80000 0 0x4000>;
1557 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1558 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1559 dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
1560 <&gpi_dma1 1 0 QCOM_GPI_SPI>;
1561 dma-names = "tx", "rx";
1562 power-domains = <&rpmhpd SM8250_CX>;
1563 operating-points-v2 = <&qup_opp_table>;
1564 #address-cells = <1>;
1566 status = "disabled";
1570 compatible = "qcom,geni-i2c";
1571 reg = <0 0x00a84000 0 0x4000>;
1573 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1574 pinctrl-names = "default";
1575 pinctrl-0 = <&qup_i2c9_default>;
1576 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1577 dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
1578 <&gpi_dma1 1 1 QCOM_GPI_I2C>;
1579 dma-names = "tx", "rx";
1580 #address-cells = <1>;
1582 status = "disabled";
1586 compatible = "qcom,geni-spi";
1587 reg = <0 0x00a84000 0 0x4000>;
1589 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1590 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1591 dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
1592 <&gpi_dma1 1 1 QCOM_GPI_SPI>;
1593 dma-names = "tx", "rx";
1594 power-domains = <&rpmhpd SM8250_CX>;
1595 operating-points-v2 = <&qup_opp_table>;
1596 #address-cells = <1>;
1598 status = "disabled";
1602 compatible = "qcom,geni-i2c";
1603 reg = <0 0x00a88000 0 0x4000>;
1605 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1606 pinctrl-names = "default";
1607 pinctrl-0 = <&qup_i2c10_default>;
1608 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1609 dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
1610 <&gpi_dma1 1 2 QCOM_GPI_I2C>;
1611 dma-names = "tx", "rx";
1612 #address-cells = <1>;
1614 status = "disabled";
1618 compatible = "qcom,geni-spi";
1619 reg = <0 0x00a88000 0 0x4000>;
1621 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1622 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1623 dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
1624 <&gpi_dma1 1 2 QCOM_GPI_SPI>;
1625 dma-names = "tx", "rx";
1626 power-domains = <&rpmhpd SM8250_CX>;
1627 operating-points-v2 = <&qup_opp_table>;
1628 #address-cells = <1>;
1630 status = "disabled";
1634 compatible = "qcom,geni-i2c";
1635 reg = <0 0x00a8c000 0 0x4000>;
1637 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1638 pinctrl-names = "default";
1639 pinctrl-0 = <&qup_i2c11_default>;
1640 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1641 dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
1642 <&gpi_dma1 1 3 QCOM_GPI_I2C>;
1643 dma-names = "tx", "rx";
1644 #address-cells = <1>;
1646 status = "disabled";
1650 compatible = "qcom,geni-spi";
1651 reg = <0 0x00a8c000 0 0x4000>;
1653 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1654 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1655 dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
1656 <&gpi_dma1 1 3 QCOM_GPI_SPI>;
1657 dma-names = "tx", "rx";
1658 power-domains = <&rpmhpd SM8250_CX>;
1659 operating-points-v2 = <&qup_opp_table>;
1660 #address-cells = <1>;
1662 status = "disabled";
1666 compatible = "qcom,geni-i2c";
1667 reg = <0 0x00a90000 0 0x4000>;
1669 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1670 pinctrl-names = "default";
1671 pinctrl-0 = <&qup_i2c12_default>;
1672 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1673 dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
1674 <&gpi_dma1 1 4 QCOM_GPI_I2C>;
1675 dma-names = "tx", "rx";
1676 #address-cells = <1>;
1678 status = "disabled";
1682 compatible = "qcom,geni-spi";
1683 reg = <0 0x00a90000 0 0x4000>;
1685 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1686 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1687 dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
1688 <&gpi_dma1 1 4 QCOM_GPI_SPI>;
1689 dma-names = "tx", "rx";
1690 power-domains = <&rpmhpd SM8250_CX>;
1691 operating-points-v2 = <&qup_opp_table>;
1692 #address-cells = <1>;
1694 status = "disabled";
1697 uart12: serial@a90000 {
1698 compatible = "qcom,geni-debug-uart";
1699 reg = <0x0 0x00a90000 0x0 0x4000>;
1701 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1702 pinctrl-names = "default";
1703 pinctrl-0 = <&qup_uart12_default>;
1704 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1705 power-domains = <&rpmhpd SM8250_CX>;
1706 operating-points-v2 = <&qup_opp_table>;
1707 status = "disabled";
1711 compatible = "qcom,geni-i2c";
1712 reg = <0 0x00a94000 0 0x4000>;
1714 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1715 pinctrl-names = "default";
1716 pinctrl-0 = <&qup_i2c13_default>;
1717 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1718 dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
1719 <&gpi_dma1 1 5 QCOM_GPI_I2C>;
1720 dma-names = "tx", "rx";
1721 #address-cells = <1>;
1723 status = "disabled";
1727 compatible = "qcom,geni-spi";
1728 reg = <0 0x00a94000 0 0x4000>;
1730 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1731 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1732 dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
1733 <&gpi_dma1 1 5 QCOM_GPI_SPI>;
1734 dma-names = "tx", "rx";
1735 power-domains = <&rpmhpd SM8250_CX>;
1736 operating-points-v2 = <&qup_opp_table>;
1737 #address-cells = <1>;
1739 status = "disabled";
1743 config_noc: interconnect@1500000 {
1744 compatible = "qcom,sm8250-config-noc";
1745 reg = <0 0x01500000 0 0xa580>;
1746 #interconnect-cells = <1>;
1747 qcom,bcm-voters = <&apps_bcm_voter>;
1750 system_noc: interconnect@1620000 {
1751 compatible = "qcom,sm8250-system-noc";
1752 reg = <0 0x01620000 0 0x1c200>;
1753 #interconnect-cells = <1>;
1754 qcom,bcm-voters = <&apps_bcm_voter>;
1757 mc_virt: interconnect@163d000 {
1758 compatible = "qcom,sm8250-mc-virt";
1759 reg = <0 0x0163d000 0 0x1000>;
1760 #interconnect-cells = <1>;
1761 qcom,bcm-voters = <&apps_bcm_voter>;
1764 aggre1_noc: interconnect@16e0000 {
1765 compatible = "qcom,sm8250-aggre1-noc";
1766 reg = <0 0x016e0000 0 0x1f180>;
1767 #interconnect-cells = <1>;
1768 qcom,bcm-voters = <&apps_bcm_voter>;
1771 aggre2_noc: interconnect@1700000 {
1772 compatible = "qcom,sm8250-aggre2-noc";
1773 reg = <0 0x01700000 0 0x33000>;
1774 #interconnect-cells = <1>;
1775 qcom,bcm-voters = <&apps_bcm_voter>;
1778 compute_noc: interconnect@1733000 {
1779 compatible = "qcom,sm8250-compute-noc";
1780 reg = <0 0x01733000 0 0xa180>;
1781 #interconnect-cells = <1>;
1782 qcom,bcm-voters = <&apps_bcm_voter>;
1785 mmss_noc: interconnect@1740000 {
1786 compatible = "qcom,sm8250-mmss-noc";
1787 reg = <0 0x01740000 0 0x1f080>;
1788 #interconnect-cells = <1>;
1789 qcom,bcm-voters = <&apps_bcm_voter>;
1792 pcie0: pci@1c00000 {
1793 compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
1794 reg = <0 0x01c00000 0 0x3000>,
1795 <0 0x60000000 0 0xf1d>,
1796 <0 0x60000f20 0 0xa8>,
1797 <0 0x60001000 0 0x1000>,
1798 <0 0x60100000 0 0x100000>;
1799 reg-names = "parf", "dbi", "elbi", "atu", "config";
1800 device_type = "pci";
1801 linux,pci-domain = <0>;
1802 bus-range = <0x00 0xff>;
1805 #address-cells = <3>;
1808 ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
1809 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
1811 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
1812 interrupt-names = "msi";
1813 #interrupt-cells = <1>;
1814 interrupt-map-mask = <0 0 0 0x7>;
1815 interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1816 <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1817 <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1818 <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1820 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
1821 <&gcc GCC_PCIE_0_AUX_CLK>,
1822 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1823 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
1824 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
1825 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
1826 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
1827 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
1828 clock-names = "pipe",
1837 iommus = <&apps_smmu 0x1c00 0x7f>;
1838 iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
1839 <0x100 &apps_smmu 0x1c01 0x1>;
1841 resets = <&gcc GCC_PCIE_0_BCR>;
1842 reset-names = "pci";
1844 power-domains = <&gcc PCIE_0_GDSC>;
1846 phys = <&pcie0_lane>;
1847 phy-names = "pciephy";
1849 perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
1850 wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
1852 pinctrl-names = "default";
1853 pinctrl-0 = <&pcie0_default_state>;
1855 status = "disabled";
1858 pcie0_phy: phy@1c06000 {
1859 compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
1860 reg = <0 0x01c06000 0 0x1c0>;
1861 #address-cells = <2>;
1864 clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
1865 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1866 <&gcc GCC_PCIE_WIFI_CLKREF_EN>,
1867 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
1868 clock-names = "aux", "cfg_ahb", "ref", "refgen";
1870 resets = <&gcc GCC_PCIE_0_PHY_BCR>;
1871 reset-names = "phy";
1873 assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
1874 assigned-clock-rates = <100000000>;
1876 status = "disabled";
1878 pcie0_lane: phy@1c06200 {
1879 reg = <0 0x1c06200 0 0x170>, /* tx */
1880 <0 0x1c06400 0 0x200>, /* rx */
1881 <0 0x1c06800 0 0x1f0>, /* pcs */
1882 <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
1883 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
1884 clock-names = "pipe0";
1887 clock-output-names = "pcie_0_pipe_clk";
1891 pcie1: pci@1c08000 {
1892 compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
1893 reg = <0 0x01c08000 0 0x3000>,
1894 <0 0x40000000 0 0xf1d>,
1895 <0 0x40000f20 0 0xa8>,
1896 <0 0x40001000 0 0x1000>,
1897 <0 0x40100000 0 0x100000>;
1898 reg-names = "parf", "dbi", "elbi", "atu", "config";
1899 device_type = "pci";
1900 linux,pci-domain = <1>;
1901 bus-range = <0x00 0xff>;
1904 #address-cells = <3>;
1907 ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
1908 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
1910 interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
1911 interrupt-names = "msi";
1912 #interrupt-cells = <1>;
1913 interrupt-map-mask = <0 0 0 0x7>;
1914 interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1915 <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1916 <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1917 <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1919 clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
1920 <&gcc GCC_PCIE_1_AUX_CLK>,
1921 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1922 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
1923 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
1924 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
1925 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
1926 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
1927 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
1928 clock-names = "pipe",
1938 assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
1939 assigned-clock-rates = <19200000>;
1941 iommus = <&apps_smmu 0x1c80 0x7f>;
1942 iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
1943 <0x100 &apps_smmu 0x1c81 0x1>;
1945 resets = <&gcc GCC_PCIE_1_BCR>;
1946 reset-names = "pci";
1948 power-domains = <&gcc PCIE_1_GDSC>;
1950 phys = <&pcie1_lane>;
1951 phy-names = "pciephy";
1953 perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
1954 wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
1956 pinctrl-names = "default";
1957 pinctrl-0 = <&pcie1_default_state>;
1959 status = "disabled";
1962 pcie1_phy: phy@1c0e000 {
1963 compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
1964 reg = <0 0x01c0e000 0 0x1c0>;
1965 #address-cells = <2>;
1968 clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
1969 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1970 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
1971 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
1972 clock-names = "aux", "cfg_ahb", "ref", "refgen";
1974 resets = <&gcc GCC_PCIE_1_PHY_BCR>;
1975 reset-names = "phy";
1977 assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
1978 assigned-clock-rates = <100000000>;
1980 status = "disabled";
1982 pcie1_lane: phy@1c0e200 {
1983 reg = <0 0x1c0e200 0 0x170>, /* tx0 */
1984 <0 0x1c0e400 0 0x200>, /* rx0 */
1985 <0 0x1c0ea00 0 0x1f0>, /* pcs */
1986 <0 0x1c0e600 0 0x170>, /* tx1 */
1987 <0 0x1c0e800 0 0x200>, /* rx1 */
1988 <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
1989 clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
1990 clock-names = "pipe0";
1993 clock-output-names = "pcie_1_pipe_clk";
1997 pcie2: pci@1c10000 {
1998 compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
1999 reg = <0 0x01c10000 0 0x3000>,
2000 <0 0x64000000 0 0xf1d>,
2001 <0 0x64000f20 0 0xa8>,
2002 <0 0x64001000 0 0x1000>,
2003 <0 0x64100000 0 0x100000>;
2004 reg-names = "parf", "dbi", "elbi", "atu", "config";
2005 device_type = "pci";
2006 linux,pci-domain = <2>;
2007 bus-range = <0x00 0xff>;
2010 #address-cells = <3>;
2013 ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
2014 <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
2016 interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
2017 interrupt-names = "msi";
2018 #interrupt-cells = <1>;
2019 interrupt-map-mask = <0 0 0 0x7>;
2020 interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
2021 <0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
2022 <0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
2023 <0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
2025 clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
2026 <&gcc GCC_PCIE_2_AUX_CLK>,
2027 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
2028 <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
2029 <&gcc GCC_PCIE_2_SLV_AXI_CLK>,
2030 <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
2031 <&gcc GCC_PCIE_MDM_CLKREF_EN>,
2032 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
2033 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
2034 clock-names = "pipe",
2044 assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
2045 assigned-clock-rates = <19200000>;
2047 iommus = <&apps_smmu 0x1d00 0x7f>;
2048 iommu-map = <0x0 &apps_smmu 0x1d00 0x1>,
2049 <0x100 &apps_smmu 0x1d01 0x1>;
2051 resets = <&gcc GCC_PCIE_2_BCR>;
2052 reset-names = "pci";
2054 power-domains = <&gcc PCIE_2_GDSC>;
2056 phys = <&pcie2_lane>;
2057 phy-names = "pciephy";
2059 perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
2060 wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
2062 pinctrl-names = "default";
2063 pinctrl-0 = <&pcie2_default_state>;
2065 status = "disabled";
2068 pcie2_phy: phy@1c16000 {
2069 compatible = "qcom,sm8250-qmp-modem-pcie-phy";
2070 reg = <0 0x1c16000 0 0x1c0>;
2071 #address-cells = <2>;
2074 clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
2075 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
2076 <&gcc GCC_PCIE_MDM_CLKREF_EN>,
2077 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
2078 clock-names = "aux", "cfg_ahb", "ref", "refgen";
2080 resets = <&gcc GCC_PCIE_2_PHY_BCR>;
2081 reset-names = "phy";
2083 assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
2084 assigned-clock-rates = <100000000>;
2086 status = "disabled";
2088 pcie2_lane: phy@1c16200 {
2089 reg = <0 0x1c16200 0 0x170>, /* tx0 */
2090 <0 0x1c16400 0 0x200>, /* rx0 */
2091 <0 0x1c16a00 0 0x1f0>, /* pcs */
2092 <0 0x1c16600 0 0x170>, /* tx1 */
2093 <0 0x1c16800 0 0x200>, /* rx1 */
2094 <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
2095 clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
2096 clock-names = "pipe0";
2099 clock-output-names = "pcie_2_pipe_clk";
2103 ufs_mem_hc: ufshc@1d84000 {
2104 compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
2106 reg = <0 0x01d84000 0 0x3000>;
2107 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
2108 phys = <&ufs_mem_phy_lanes>;
2109 phy-names = "ufsphy";
2110 lanes-per-direction = <2>;
2112 resets = <&gcc GCC_UFS_PHY_BCR>;
2113 reset-names = "rst";
2115 power-domains = <&gcc UFS_PHY_GDSC>;
2117 iommus = <&apps_smmu 0x0e0 0>, <&apps_smmu 0x4e0 0>;
2125 "tx_lane0_sync_clk",
2126 "rx_lane0_sync_clk",
2127 "rx_lane1_sync_clk";
2129 <&gcc GCC_UFS_PHY_AXI_CLK>,
2130 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
2131 <&gcc GCC_UFS_PHY_AHB_CLK>,
2132 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
2133 <&rpmhcc RPMH_CXO_CLK>,
2134 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
2135 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
2136 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
2138 <37500000 300000000>,
2141 <37500000 300000000>,
2147 status = "disabled";
2150 ufs_mem_phy: phy@1d87000 {
2151 compatible = "qcom,sm8250-qmp-ufs-phy";
2152 reg = <0 0x01d87000 0 0x1c0>;
2153 #address-cells = <2>;
2156 clock-names = "ref",
2158 clocks = <&rpmhcc RPMH_CXO_CLK>,
2159 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
2161 resets = <&ufs_mem_hc 0>;
2162 reset-names = "ufsphy";
2163 status = "disabled";
2165 ufs_mem_phy_lanes: phy@1d87400 {
2166 reg = <0 0x01d87400 0 0x108>,
2167 <0 0x01d87600 0 0x1e0>,
2168 <0 0x01d87c00 0 0x1dc>,
2169 <0 0x01d87800 0 0x108>,
2170 <0 0x01d87a00 0 0x1e0>;
2175 ipa_virt: interconnect@1e00000 {
2176 compatible = "qcom,sm8250-ipa-virt";
2177 reg = <0 0x01e00000 0 0x1000>;
2178 #interconnect-cells = <1>;
2179 qcom,bcm-voters = <&apps_bcm_voter>;
2182 tcsr_mutex: hwlock@1f40000 {
2183 compatible = "qcom,tcsr-mutex";
2184 reg = <0x0 0x01f40000 0x0 0x40000>;
2185 #hwlock-cells = <1>;
2188 wsamacro: codec@3240000 {
2189 compatible = "qcom,sm8250-lpass-wsa-macro";
2190 reg = <0 0x03240000 0 0x1000>;
2191 clocks = <&audiocc 1>,
2193 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2194 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2198 clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
2201 clock-frequency = <9600000>;
2202 clock-output-names = "mclk";
2203 #sound-dai-cells = <1>;
2205 pinctrl-names = "default";
2206 pinctrl-0 = <&wsa_swr_active>;
2209 swr0: soundwire-controller@3250000 {
2210 reg = <0 0x03250000 0 0x2000>;
2211 compatible = "qcom,soundwire-v1.5.1";
2212 interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
2213 clocks = <&wsamacro>;
2214 clock-names = "iface";
2216 qcom,din-ports = <2>;
2217 qcom,dout-ports = <6>;
2219 qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
2220 qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
2221 qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
2222 qcom,ports-block-pack-mode = /bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>;
2224 #sound-dai-cells = <1>;
2225 #address-cells = <2>;
2229 audiocc: clock-controller@3300000 {
2230 compatible = "qcom,sm8250-lpass-audiocc";
2231 reg = <0 0x03300000 0 0x30000>;
2233 clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2234 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2235 <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2236 clock-names = "core", "audio", "bus";
2239 vamacro: codec@3370000 {
2240 compatible = "qcom,sm8250-lpass-va-macro";
2241 reg = <0 0x03370000 0 0x1000>;
2242 clocks = <&aoncc 0>,
2243 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2244 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2246 clock-names = "mclk", "macro", "dcodec";
2249 clock-frequency = <9600000>;
2250 clock-output-names = "fsgen";
2251 #sound-dai-cells = <1>;
2254 rxmacro: rxmacro@3200000 {
2255 pinctrl-names = "default";
2256 pinctrl-0 = <&rx_swr_active>;
2257 compatible = "qcom,sm8250-lpass-rx-macro";
2258 reg = <0 0x3200000 0 0x1000>;
2259 status = "disabled";
2261 clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2262 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2263 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2264 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2267 clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2270 clock-frequency = <9600000>;
2271 clock-output-names = "mclk";
2272 #sound-dai-cells = <1>;
2275 swr1: soundwire-controller@3210000 {
2276 reg = <0 0x3210000 0 0x2000>;
2277 compatible = "qcom,soundwire-v1.5.1";
2278 status = "disabled";
2279 interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
2280 clocks = <&rxmacro>;
2281 clock-names = "iface";
2283 qcom,din-ports = <0>;
2284 qcom,dout-ports = <5>;
2286 qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1F 0x1F 0x07 0x00>;
2287 qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
2288 qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
2289 qcom,ports-hstart = /bits/ 8 <0xFF 0x03 0xFF 0xFF 0xFF>;
2290 qcom,ports-hstop = /bits/ 8 <0xFF 0x06 0xFF 0xFF 0xFF>;
2291 qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xFF 0xFF>;
2292 qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0x00 0x01 0xFF 0xFF>;
2293 qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
2294 qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0x00>;
2296 #sound-dai-cells = <1>;
2297 #address-cells = <2>;
2301 txmacro: txmacro@3220000 {
2302 pinctrl-names = "default";
2303 pinctrl-0 = <&tx_swr_active>;
2304 compatible = "qcom,sm8250-lpass-tx-macro";
2305 reg = <0 0x3220000 0 0x1000>;
2306 status = "disabled";
2308 clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2309 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2310 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2311 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2314 clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2317 clock-frequency = <9600000>;
2318 clock-output-names = "mclk";
2319 #address-cells = <2>;
2321 #sound-dai-cells = <1>;
2325 swr2: soundwire-controller@3230000 {
2326 reg = <0 0x3230000 0 0x2000>;
2327 compatible = "qcom,soundwire-v1.5.1";
2328 interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
2329 interrupt-names = "core";
2330 status = "disabled";
2332 clocks = <&txmacro>;
2333 clock-names = "iface";
2336 qcom,din-ports = <5>;
2337 qcom,dout-ports = <0>;
2338 qcom,ports-sinterval-low = /bits/ 8 <0xFF 0x01 0x01 0x03 0x03>;
2339 qcom,ports-offset1 = /bits/ 8 <0xFF 0x01 0x00 0x02 0x00>;
2340 qcom,ports-offset2 = /bits/ 8 <0xFF 0x00 0x00 0x00 0x00>;
2341 qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
2342 qcom,ports-hstart = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
2343 qcom,ports-hstop = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
2344 qcom,ports-word-length = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
2345 qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
2346 qcom,ports-lane-control = /bits/ 8 <0xFF 0x00 0x01 0x00 0x01>;
2347 qcom,port-offset = <1>;
2348 #sound-dai-cells = <1>;
2349 #address-cells = <2>;
2353 aoncc: clock-controller@3380000 {
2354 compatible = "qcom,sm8250-lpass-aoncc";
2355 reg = <0 0x03380000 0 0x40000>;
2357 clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2358 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2359 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2360 clock-names = "core", "audio", "bus";
2363 lpass_tlmm: pinctrl@33c0000{
2364 compatible = "qcom,sm8250-lpass-lpi-pinctrl";
2365 reg = <0 0x033c0000 0x0 0x20000>,
2366 <0 0x03550000 0x0 0x10000>;
2369 gpio-ranges = <&lpass_tlmm 0 0 14>;
2371 clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2372 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2373 clock-names = "core", "audio";
2375 wsa_swr_active: wsa-swr-active-pins {
2378 function = "wsa_swr_clk";
2379 drive-strength = <2>;
2386 function = "wsa_swr_data";
2387 drive-strength = <2>;
2394 wsa_swr_sleep: wsa-swr-sleep-pins {
2397 function = "wsa_swr_clk";
2398 drive-strength = <2>;
2405 function = "wsa_swr_data";
2406 drive-strength = <2>;
2413 dmic01_active: dmic01-active-pins {
2416 function = "dmic1_clk";
2417 drive-strength = <8>;
2422 function = "dmic1_data";
2423 drive-strength = <8>;
2428 dmic01_sleep: dmic01-sleep-pins {
2431 function = "dmic1_clk";
2432 drive-strength = <2>;
2439 function = "dmic1_data";
2440 drive-strength = <2>;
2446 rx_swr_active: rx_swr-active-pins {
2449 function = "swr_rx_clk";
2450 drive-strength = <2>;
2456 pins = "gpio4", "gpio5";
2457 function = "swr_rx_data";
2458 drive-strength = <2>;
2464 tx_swr_active: tx_swr-active-pins {
2467 function = "swr_tx_clk";
2468 drive-strength = <2>;
2474 pins = "gpio1", "gpio2";
2475 function = "swr_tx_data";
2476 drive-strength = <2>;
2482 tx_swr_sleep: tx_swr-sleep-pins {
2485 function = "swr_tx_clk";
2486 drive-strength = <2>;
2493 function = "swr_tx_data";
2494 drive-strength = <2>;
2501 function = "swr_tx_data";
2502 drive-strength = <2>;
2510 compatible = "qcom,adreno-650.2",
2513 reg = <0 0x03d00000 0 0x40000>;
2514 reg-names = "kgsl_3d0_reg_memory";
2516 interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
2518 iommus = <&adreno_smmu 0 0x401>;
2520 operating-points-v2 = <&gpu_opp_table>;
2524 status = "disabled";
2527 memory-region = <&gpu_mem>;
2530 /* note: downstream checks gpu binning for 670 Mhz */
2531 gpu_opp_table: opp-table {
2532 compatible = "operating-points-v2";
2535 opp-hz = /bits/ 64 <670000000>;
2536 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
2540 opp-hz = /bits/ 64 <587000000>;
2541 opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
2545 opp-hz = /bits/ 64 <525000000>;
2546 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
2550 opp-hz = /bits/ 64 <490000000>;
2551 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
2555 opp-hz = /bits/ 64 <441600000>;
2556 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
2560 opp-hz = /bits/ 64 <400000000>;
2561 opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2565 opp-hz = /bits/ 64 <305000000>;
2566 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2572 compatible="qcom,adreno-gmu-650.2", "qcom,adreno-gmu";
2574 reg = <0 0x03d6a000 0 0x30000>,
2575 <0 0x3de0000 0 0x10000>,
2576 <0 0xb290000 0 0x10000>,
2577 <0 0xb490000 0 0x10000>;
2578 reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq";
2580 interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
2581 <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
2582 interrupt-names = "hfi", "gmu";
2584 clocks = <&gpucc GPU_CC_AHB_CLK>,
2585 <&gpucc GPU_CC_CX_GMU_CLK>,
2586 <&gpucc GPU_CC_CXO_CLK>,
2587 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
2588 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
2589 clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
2591 power-domains = <&gpucc GPU_CX_GDSC>,
2592 <&gpucc GPU_GX_GDSC>;
2593 power-domain-names = "cx", "gx";
2595 iommus = <&adreno_smmu 5 0x400>;
2597 operating-points-v2 = <&gmu_opp_table>;
2599 status = "disabled";
2601 gmu_opp_table: opp-table {
2602 compatible = "operating-points-v2";
2605 opp-hz = /bits/ 64 <200000000>;
2606 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
2611 gpucc: clock-controller@3d90000 {
2612 compatible = "qcom,sm8250-gpucc";
2613 reg = <0 0x03d90000 0 0x9000>;
2614 clocks = <&rpmhcc RPMH_CXO_CLK>,
2615 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
2616 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
2617 clock-names = "bi_tcxo",
2618 "gcc_gpu_gpll0_clk_src",
2619 "gcc_gpu_gpll0_div_clk_src";
2622 #power-domain-cells = <1>;
2625 adreno_smmu: iommu@3da0000 {
2626 compatible = "qcom,sm8250-smmu-500", "arm,mmu-500";
2627 reg = <0 0x03da0000 0 0x10000>;
2629 #global-interrupts = <2>;
2630 interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
2631 <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
2632 <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
2633 <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
2634 <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
2635 <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
2636 <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
2637 <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
2638 <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
2639 <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
2640 clocks = <&gpucc GPU_CC_AHB_CLK>,
2641 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
2642 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
2643 clock-names = "ahb", "bus", "iface";
2645 power-domains = <&gpucc GPU_CX_GDSC>;
2648 slpi: remoteproc@5c00000 {
2649 compatible = "qcom,sm8250-slpi-pas";
2650 reg = <0 0x05c00000 0 0x4000>;
2652 interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
2653 <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
2654 <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
2655 <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
2656 <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
2657 interrupt-names = "wdog", "fatal", "ready",
2658 "handover", "stop-ack";
2660 clocks = <&rpmhcc RPMH_CXO_CLK>;
2663 power-domains = <&rpmhpd SM8250_LCX>,
2664 <&rpmhpd SM8250_LMX>;
2665 power-domain-names = "lcx", "lmx";
2667 memory-region = <&slpi_mem>;
2669 qcom,qmp = <&aoss_qmp>;
2671 qcom,smem-states = <&smp2p_slpi_out 0>;
2672 qcom,smem-state-names = "stop";
2674 status = "disabled";
2677 interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
2678 IPCC_MPROC_SIGNAL_GLINK_QMP
2679 IRQ_TYPE_EDGE_RISING>;
2680 mboxes = <&ipcc IPCC_CLIENT_SLPI
2681 IPCC_MPROC_SIGNAL_GLINK_QMP>;
2684 qcom,remote-pid = <3>;
2687 compatible = "qcom,fastrpc";
2688 qcom,glink-channels = "fastrpcglink-apps-dsp";
2690 qcom,non-secure-domain;
2691 #address-cells = <1>;
2695 compatible = "qcom,fastrpc-compute-cb";
2697 iommus = <&apps_smmu 0x0541 0x0>;
2701 compatible = "qcom,fastrpc-compute-cb";
2703 iommus = <&apps_smmu 0x0542 0x0>;
2707 compatible = "qcom,fastrpc-compute-cb";
2709 iommus = <&apps_smmu 0x0543 0x0>;
2710 /* note: shared-cb = <4> in downstream */
2716 cdsp: remoteproc@8300000 {
2717 compatible = "qcom,sm8250-cdsp-pas";
2718 reg = <0 0x08300000 0 0x10000>;
2720 interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
2721 <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
2722 <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
2723 <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
2724 <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
2725 interrupt-names = "wdog", "fatal", "ready",
2726 "handover", "stop-ack";
2728 clocks = <&rpmhcc RPMH_CXO_CLK>;
2731 power-domains = <&rpmhpd SM8250_CX>;
2733 memory-region = <&cdsp_mem>;
2735 qcom,qmp = <&aoss_qmp>;
2737 qcom,smem-states = <&smp2p_cdsp_out 0>;
2738 qcom,smem-state-names = "stop";
2740 status = "disabled";
2743 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
2744 IPCC_MPROC_SIGNAL_GLINK_QMP
2745 IRQ_TYPE_EDGE_RISING>;
2746 mboxes = <&ipcc IPCC_CLIENT_CDSP
2747 IPCC_MPROC_SIGNAL_GLINK_QMP>;
2750 qcom,remote-pid = <5>;
2753 compatible = "qcom,fastrpc";
2754 qcom,glink-channels = "fastrpcglink-apps-dsp";
2756 qcom,non-secure-domain;
2757 #address-cells = <1>;
2761 compatible = "qcom,fastrpc-compute-cb";
2763 iommus = <&apps_smmu 0x1001 0x0460>;
2767 compatible = "qcom,fastrpc-compute-cb";
2769 iommus = <&apps_smmu 0x1002 0x0460>;
2773 compatible = "qcom,fastrpc-compute-cb";
2775 iommus = <&apps_smmu 0x1003 0x0460>;
2779 compatible = "qcom,fastrpc-compute-cb";
2781 iommus = <&apps_smmu 0x1004 0x0460>;
2785 compatible = "qcom,fastrpc-compute-cb";
2787 iommus = <&apps_smmu 0x1005 0x0460>;
2791 compatible = "qcom,fastrpc-compute-cb";
2793 iommus = <&apps_smmu 0x1006 0x0460>;
2797 compatible = "qcom,fastrpc-compute-cb";
2799 iommus = <&apps_smmu 0x1007 0x0460>;
2803 compatible = "qcom,fastrpc-compute-cb";
2805 iommus = <&apps_smmu 0x1008 0x0460>;
2808 /* note: secure cb9 in downstream */
2816 usb_1_hsphy: phy@88e3000 {
2817 compatible = "qcom,sm8250-usb-hs-phy",
2818 "qcom,usb-snps-hs-7nm-phy";
2819 reg = <0 0x088e3000 0 0x400>;
2820 status = "disabled";
2823 clocks = <&rpmhcc RPMH_CXO_CLK>;
2824 clock-names = "ref";
2826 resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2829 usb_2_hsphy: phy@88e4000 {
2830 compatible = "qcom,sm8250-usb-hs-phy",
2831 "qcom,usb-snps-hs-7nm-phy";
2832 reg = <0 0x088e4000 0 0x400>;
2833 status = "disabled";
2836 clocks = <&rpmhcc RPMH_CXO_CLK>;
2837 clock-names = "ref";
2839 resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
2842 usb_1_qmpphy: phy@88e9000 {
2843 compatible = "qcom,sm8250-qmp-usb3-dp-phy";
2844 reg = <0 0x088e9000 0 0x200>,
2845 <0 0x088e8000 0 0x40>,
2846 <0 0x088ea000 0 0x200>;
2847 status = "disabled";
2848 #address-cells = <2>;
2852 clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2853 <&rpmhcc RPMH_CXO_CLK>,
2854 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
2855 clock-names = "aux", "ref_clk_src", "com_aux";
2857 resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
2858 <&gcc GCC_USB3_PHY_PRIM_BCR>;
2859 reset-names = "phy", "common";
2861 usb_1_ssphy: usb3-phy@88e9200 {
2862 reg = <0 0x088e9200 0 0x200>,
2863 <0 0x088e9400 0 0x200>,
2864 <0 0x088e9c00 0 0x400>,
2865 <0 0x088e9600 0 0x200>,
2866 <0 0x088e9800 0 0x200>,
2867 <0 0x088e9a00 0 0x100>;
2870 clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2871 clock-names = "pipe0";
2872 clock-output-names = "usb3_phy_pipe_clk_src";
2875 dp_phy: dp-phy@88ea200 {
2876 reg = <0 0x088ea200 0 0x200>,
2877 <0 0x088ea400 0 0x200>,
2878 <0 0x088eac00 0 0x400>,
2879 <0 0x088ea600 0 0x200>,
2880 <0 0x088ea800 0 0x200>,
2881 <0 0x088eaa00 0 0x100>;
2884 clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2885 clock-names = "pipe0";
2886 clock-output-names = "usb3_phy_pipe_clk_src";
2890 usb_2_qmpphy: phy@88eb000 {
2891 compatible = "qcom,sm8250-qmp-usb3-uni-phy";
2892 reg = <0 0x088eb000 0 0x200>;
2893 status = "disabled";
2894 #address-cells = <2>;
2898 clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
2899 <&rpmhcc RPMH_CXO_CLK>,
2900 <&gcc GCC_USB3_SEC_CLKREF_EN>,
2901 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
2902 clock-names = "aux", "ref_clk_src", "ref", "com_aux";
2904 resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
2905 <&gcc GCC_USB3_PHY_SEC_BCR>;
2906 reset-names = "phy", "common";
2908 usb_2_ssphy: phy@88eb200 {
2909 reg = <0 0x088eb200 0 0x200>,
2910 <0 0x088eb400 0 0x200>,
2911 <0 0x088eb800 0 0x800>;
2914 clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
2915 clock-names = "pipe0";
2916 clock-output-names = "usb3_uni_phy_pipe_clk_src";
2920 sdhc_2: sdhci@8804000 {
2921 compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
2922 reg = <0 0x08804000 0 0x1000>;
2924 interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
2925 <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
2926 interrupt-names = "hc_irq", "pwr_irq";
2928 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2929 <&gcc GCC_SDCC2_APPS_CLK>,
2930 <&rpmhcc RPMH_CXO_CLK>;
2931 clock-names = "iface", "core", "xo";
2932 iommus = <&apps_smmu 0x4a0 0x0>;
2933 qcom,dll-config = <0x0007642c>;
2934 qcom,ddr-config = <0x80040868>;
2935 power-domains = <&rpmhpd SM8250_CX>;
2936 operating-points-v2 = <&sdhc2_opp_table>;
2938 status = "disabled";
2940 sdhc2_opp_table: sdhc2-opp-table {
2941 compatible = "operating-points-v2";
2944 opp-hz = /bits/ 64 <19200000>;
2945 required-opps = <&rpmhpd_opp_min_svs>;
2949 opp-hz = /bits/ 64 <50000000>;
2950 required-opps = <&rpmhpd_opp_low_svs>;
2954 opp-hz = /bits/ 64 <100000000>;
2955 required-opps = <&rpmhpd_opp_svs>;
2959 opp-hz = /bits/ 64 <202000000>;
2960 required-opps = <&rpmhpd_opp_svs_l1>;
2965 dc_noc: interconnect@90c0000 {
2966 compatible = "qcom,sm8250-dc-noc";
2967 reg = <0 0x090c0000 0 0x4200>;
2968 #interconnect-cells = <1>;
2969 qcom,bcm-voters = <&apps_bcm_voter>;
2972 gem_noc: interconnect@9100000 {
2973 compatible = "qcom,sm8250-gem-noc";
2974 reg = <0 0x09100000 0 0xb4000>;
2975 #interconnect-cells = <1>;
2976 qcom,bcm-voters = <&apps_bcm_voter>;
2979 npu_noc: interconnect@9990000 {
2980 compatible = "qcom,sm8250-npu-noc";
2981 reg = <0 0x09990000 0 0x1600>;
2982 #interconnect-cells = <1>;
2983 qcom,bcm-voters = <&apps_bcm_voter>;
2986 usb_1: usb@a6f8800 {
2987 compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
2988 reg = <0 0x0a6f8800 0 0x400>;
2989 status = "disabled";
2990 #address-cells = <2>;
2995 clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
2996 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
2997 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
2998 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2999 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
3000 <&gcc GCC_USB3_SEC_CLKREF_EN>;
3001 clock-names = "cfg_noc", "core", "iface", "mock_utmi",
3004 assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
3005 <&gcc GCC_USB30_PRIM_MASTER_CLK>;
3006 assigned-clock-rates = <19200000>, <200000000>;
3008 interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
3009 <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
3010 <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
3011 <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
3012 interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
3013 "dm_hs_phy_irq", "ss_phy_irq";
3015 power-domains = <&gcc USB30_PRIM_GDSC>;
3017 resets = <&gcc GCC_USB30_PRIM_BCR>;
3019 usb_1_dwc3: usb@a600000 {
3020 compatible = "snps,dwc3";
3021 reg = <0 0x0a600000 0 0xcd00>;
3022 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
3023 iommus = <&apps_smmu 0x0 0x0>;
3024 snps,dis_u2_susphy_quirk;
3025 snps,dis_enblslpm_quirk;
3026 phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
3027 phy-names = "usb2-phy", "usb3-phy";
3031 system-cache-controller@9200000 {
3032 compatible = "qcom,sm8250-llcc";
3033 reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>;
3034 reg-names = "llcc_base", "llcc_broadcast_base";
3037 usb_2: usb@a8f8800 {
3038 compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
3039 reg = <0 0x0a8f8800 0 0x400>;
3040 status = "disabled";
3041 #address-cells = <2>;
3046 clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
3047 <&gcc GCC_USB30_SEC_MASTER_CLK>,
3048 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
3049 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
3050 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
3051 <&gcc GCC_USB3_SEC_CLKREF_EN>;
3052 clock-names = "cfg_noc", "core", "iface", "mock_utmi",
3055 assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
3056 <&gcc GCC_USB30_SEC_MASTER_CLK>;
3057 assigned-clock-rates = <19200000>, <200000000>;
3059 interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
3060 <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
3061 <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
3062 <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
3063 interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
3064 "dm_hs_phy_irq", "ss_phy_irq";
3066 power-domains = <&gcc USB30_SEC_GDSC>;
3068 resets = <&gcc GCC_USB30_SEC_BCR>;
3070 usb_2_dwc3: usb@a800000 {
3071 compatible = "snps,dwc3";
3072 reg = <0 0x0a800000 0 0xcd00>;
3073 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
3074 iommus = <&apps_smmu 0x20 0>;
3075 snps,dis_u2_susphy_quirk;
3076 snps,dis_enblslpm_quirk;
3077 phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
3078 phy-names = "usb2-phy", "usb3-phy";
3082 venus: video-codec@aa00000 {
3083 compatible = "qcom,sm8250-venus";
3084 reg = <0 0x0aa00000 0 0x100000>;
3085 interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
3086 power-domains = <&videocc MVS0C_GDSC>,
3087 <&videocc MVS0_GDSC>,
3088 <&rpmhpd SM8250_MX>;
3089 power-domain-names = "venus", "vcodec0", "mx";
3090 operating-points-v2 = <&venus_opp_table>;
3092 clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
3093 <&videocc VIDEO_CC_MVS0C_CLK>,
3094 <&videocc VIDEO_CC_MVS0_CLK>;
3095 clock-names = "iface", "core", "vcodec0_core";
3097 interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>,
3098 <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>;
3099 interconnect-names = "cpu-cfg", "video-mem";
3101 iommus = <&apps_smmu 0x2100 0x0400>;
3102 memory-region = <&video_mem>;
3104 resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
3105 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
3106 reset-names = "bus", "core";
3108 status = "disabled";
3111 compatible = "venus-decoder";
3115 compatible = "venus-encoder";
3118 venus_opp_table: venus-opp-table {
3119 compatible = "operating-points-v2";
3122 opp-hz = /bits/ 64 <720000000>;
3123 required-opps = <&rpmhpd_opp_low_svs>;
3127 opp-hz = /bits/ 64 <1014000000>;
3128 required-opps = <&rpmhpd_opp_svs>;
3132 opp-hz = /bits/ 64 <1098000000>;
3133 required-opps = <&rpmhpd_opp_svs_l1>;
3137 opp-hz = /bits/ 64 <1332000000>;
3138 required-opps = <&rpmhpd_opp_nom>;
3143 videocc: clock-controller@abf0000 {
3144 compatible = "qcom,sm8250-videocc";
3145 reg = <0 0x0abf0000 0 0x10000>;
3146 clocks = <&gcc GCC_VIDEO_AHB_CLK>,
3147 <&rpmhcc RPMH_CXO_CLK>,
3148 <&rpmhcc RPMH_CXO_CLK_A>;
3149 power-domains = <&rpmhpd SM8250_MMCX>;
3150 required-opps = <&rpmhpd_opp_low_svs>;
3151 clock-names = "iface", "bi_tcxo", "bi_tcxo_ao";
3154 #power-domain-cells = <1>;
3158 compatible = "qcom,sm8250-cci";
3159 #address-cells = <1>;
3162 reg = <0 0x0ac4f000 0 0x1000>;
3163 interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
3164 power-domains = <&camcc TITAN_TOP_GDSC>;
3166 clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
3167 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
3168 <&camcc CAM_CC_CPAS_AHB_CLK>,
3169 <&camcc CAM_CC_CCI_0_CLK>,
3170 <&camcc CAM_CC_CCI_0_CLK_SRC>;
3171 clock-names = "camnoc_axi",
3177 pinctrl-0 = <&cci0_default>;
3178 pinctrl-1 = <&cci0_sleep>;
3179 pinctrl-names = "default", "sleep";
3181 status = "disabled";
3183 cci0_i2c0: i2c-bus@0 {
3185 clock-frequency = <1000000>;
3186 #address-cells = <1>;
3190 cci0_i2c1: i2c-bus@1 {
3192 clock-frequency = <1000000>;
3193 #address-cells = <1>;
3199 compatible = "qcom,sm8250-cci";
3200 #address-cells = <1>;
3203 reg = <0 0x0ac50000 0 0x1000>;
3204 interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
3205 power-domains = <&camcc TITAN_TOP_GDSC>;
3207 clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
3208 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
3209 <&camcc CAM_CC_CPAS_AHB_CLK>,
3210 <&camcc CAM_CC_CCI_1_CLK>,
3211 <&camcc CAM_CC_CCI_1_CLK_SRC>;
3212 clock-names = "camnoc_axi",
3218 pinctrl-0 = <&cci1_default>;
3219 pinctrl-1 = <&cci1_sleep>;
3220 pinctrl-names = "default", "sleep";
3222 status = "disabled";
3224 cci1_i2c0: i2c-bus@0 {
3226 clock-frequency = <1000000>;
3227 #address-cells = <1>;
3231 cci1_i2c1: i2c-bus@1 {
3233 clock-frequency = <1000000>;
3234 #address-cells = <1>;
3239 camss: camss@ac6a000 {
3240 compatible = "qcom,sm8250-camss";
3241 status = "disabled";
3243 reg = <0 0xac6a000 0 0x2000>,
3244 <0 0xac6c000 0 0x2000>,
3245 <0 0xac6e000 0 0x1000>,
3246 <0 0xac70000 0 0x1000>,
3247 <0 0xac72000 0 0x1000>,
3248 <0 0xac74000 0 0x1000>,
3249 <0 0xacb4000 0 0xd000>,
3250 <0 0xacc3000 0 0xd000>,
3251 <0 0xacd9000 0 0x2200>,
3252 <0 0xacdb200 0 0x2200>;
3253 reg-names = "csiphy0",
3264 interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
3265 <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
3266 <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
3267 <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
3268 <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
3269 <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
3270 <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
3271 <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
3272 <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
3273 <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
3274 <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
3275 <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
3276 <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
3277 <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
3278 interrupt-names = "csiphy0",
3293 power-domains = <&camcc IFE_0_GDSC>,
3294 <&camcc IFE_1_GDSC>,
3295 <&camcc TITAN_TOP_GDSC>;
3297 clocks = <&gcc GCC_CAMERA_AHB_CLK>,
3298 <&gcc GCC_CAMERA_HF_AXI_CLK>,
3299 <&gcc GCC_CAMERA_SF_AXI_CLK>,
3300 <&camcc CAM_CC_CAMNOC_AXI_CLK>,
3301 <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
3302 <&camcc CAM_CC_CORE_AHB_CLK>,
3303 <&camcc CAM_CC_CPAS_AHB_CLK>,
3304 <&camcc CAM_CC_CSIPHY0_CLK>,
3305 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
3306 <&camcc CAM_CC_CSIPHY1_CLK>,
3307 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
3308 <&camcc CAM_CC_CSIPHY2_CLK>,
3309 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
3310 <&camcc CAM_CC_CSIPHY3_CLK>,
3311 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
3312 <&camcc CAM_CC_CSIPHY4_CLK>,
3313 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
3314 <&camcc CAM_CC_CSIPHY5_CLK>,
3315 <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
3316 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
3317 <&camcc CAM_CC_IFE_0_AHB_CLK>,
3318 <&camcc CAM_CC_IFE_0_AXI_CLK>,
3319 <&camcc CAM_CC_IFE_0_CLK>,
3320 <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
3321 <&camcc CAM_CC_IFE_0_CSID_CLK>,
3322 <&camcc CAM_CC_IFE_0_AREG_CLK>,
3323 <&camcc CAM_CC_IFE_1_AHB_CLK>,
3324 <&camcc CAM_CC_IFE_1_AXI_CLK>,
3325 <&camcc CAM_CC_IFE_1_CLK>,
3326 <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
3327 <&camcc CAM_CC_IFE_1_CSID_CLK>,
3328 <&camcc CAM_CC_IFE_1_AREG_CLK>,
3329 <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
3330 <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
3331 <&camcc CAM_CC_IFE_LITE_CLK>,
3332 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
3333 <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
3335 clock-names = "cam_ahb_clk",
3373 iommus = <&apps_smmu 0x800 0x400>,
3374 <&apps_smmu 0x801 0x400>,
3375 <&apps_smmu 0x840 0x400>,
3376 <&apps_smmu 0x841 0x400>,
3377 <&apps_smmu 0xc00 0x400>,
3378 <&apps_smmu 0xc01 0x400>,
3379 <&apps_smmu 0xc40 0x400>,
3380 <&apps_smmu 0xc41 0x400>;
3382 interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>,
3383 <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>,
3384 <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>,
3385 <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>;
3386 interconnect-names = "cam_ahb",
3392 camcc: clock-controller@ad00000 {
3393 compatible = "qcom,sm8250-camcc";
3394 reg = <0 0x0ad00000 0 0x10000>;
3395 clocks = <&gcc GCC_CAMERA_AHB_CLK>,
3396 <&rpmhcc RPMH_CXO_CLK>,
3397 <&rpmhcc RPMH_CXO_CLK_A>,
3399 clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
3400 power-domains = <&rpmhpd SM8250_MMCX>;
3401 required-opps = <&rpmhpd_opp_low_svs>;
3404 #power-domain-cells = <1>;
3407 mdss: mdss@ae00000 {
3408 compatible = "qcom,sm8250-mdss";
3409 reg = <0 0x0ae00000 0 0x1000>;
3412 interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
3413 <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
3414 interconnect-names = "mdp0-mem", "mdp1-mem";
3416 power-domains = <&dispcc MDSS_GDSC>;
3418 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3419 <&gcc GCC_DISP_HF_AXI_CLK>,
3420 <&gcc GCC_DISP_SF_AXI_CLK>,
3421 <&dispcc DISP_CC_MDSS_MDP_CLK>;
3422 clock-names = "iface", "bus", "nrt_bus", "core";
3424 assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
3425 assigned-clock-rates = <460000000>;
3427 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
3428 interrupt-controller;
3429 #interrupt-cells = <1>;
3431 iommus = <&apps_smmu 0x820 0x402>;
3433 status = "disabled";
3435 #address-cells = <2>;
3439 mdss_mdp: mdp@ae01000 {
3440 compatible = "qcom,sm8250-dpu";
3441 reg = <0 0x0ae01000 0 0x8f000>,
3442 <0 0x0aeb0000 0 0x2008>;
3443 reg-names = "mdp", "vbif";
3445 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3446 <&gcc GCC_DISP_HF_AXI_CLK>,
3447 <&dispcc DISP_CC_MDSS_MDP_CLK>,
3448 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
3449 clock-names = "iface", "bus", "core", "vsync";
3451 assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
3452 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
3453 assigned-clock-rates = <460000000>,
3456 operating-points-v2 = <&mdp_opp_table>;
3457 power-domains = <&rpmhpd SM8250_MMCX>;
3459 interrupt-parent = <&mdss>;
3463 #address-cells = <1>;
3468 dpu_intf1_out: endpoint {
3469 remote-endpoint = <&dsi0_in>;
3475 dpu_intf2_out: endpoint {
3476 remote-endpoint = <&dsi1_in>;
3481 mdp_opp_table: mdp-opp-table {
3482 compatible = "operating-points-v2";
3485 opp-hz = /bits/ 64 <200000000>;
3486 required-opps = <&rpmhpd_opp_low_svs>;
3490 opp-hz = /bits/ 64 <300000000>;
3491 required-opps = <&rpmhpd_opp_svs>;
3495 opp-hz = /bits/ 64 <345000000>;
3496 required-opps = <&rpmhpd_opp_svs_l1>;
3500 opp-hz = /bits/ 64 <460000000>;
3501 required-opps = <&rpmhpd_opp_nom>;
3507 compatible = "qcom,mdss-dsi-ctrl";
3508 reg = <0 0x0ae94000 0 0x400>;
3509 reg-names = "dsi_ctrl";
3511 interrupt-parent = <&mdss>;
3514 clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
3515 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
3516 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
3517 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
3518 <&dispcc DISP_CC_MDSS_AHB_CLK>,
3519 <&gcc GCC_DISP_HF_AXI_CLK>;
3520 clock-names = "byte",
3527 assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
3528 assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
3530 operating-points-v2 = <&dsi_opp_table>;
3531 power-domains = <&rpmhpd SM8250_MMCX>;
3536 status = "disabled";
3538 #address-cells = <1>;
3542 #address-cells = <1>;
3548 remote-endpoint = <&dpu_intf1_out>;
3554 dsi0_out: endpoint {
3560 dsi0_phy: dsi-phy@ae94400 {
3561 compatible = "qcom,dsi-phy-7nm";
3562 reg = <0 0x0ae94400 0 0x200>,
3563 <0 0x0ae94600 0 0x280>,
3564 <0 0x0ae94900 0 0x260>;
3565 reg-names = "dsi_phy",
3572 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3573 <&rpmhcc RPMH_CXO_CLK>;
3574 clock-names = "iface", "ref";
3576 status = "disabled";
3580 compatible = "qcom,mdss-dsi-ctrl";
3581 reg = <0 0x0ae96000 0 0x400>;
3582 reg-names = "dsi_ctrl";
3584 interrupt-parent = <&mdss>;
3587 clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
3588 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
3589 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
3590 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
3591 <&dispcc DISP_CC_MDSS_AHB_CLK>,
3592 <&gcc GCC_DISP_HF_AXI_CLK>;
3593 clock-names = "byte",
3600 assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
3601 assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
3603 operating-points-v2 = <&dsi_opp_table>;
3604 power-domains = <&rpmhpd SM8250_MMCX>;
3609 status = "disabled";
3611 #address-cells = <1>;
3615 #address-cells = <1>;
3621 remote-endpoint = <&dpu_intf2_out>;
3627 dsi1_out: endpoint {
3633 dsi1_phy: dsi-phy@ae96400 {
3634 compatible = "qcom,dsi-phy-7nm";
3635 reg = <0 0x0ae96400 0 0x200>,
3636 <0 0x0ae96600 0 0x280>,
3637 <0 0x0ae96900 0 0x260>;
3638 reg-names = "dsi_phy",
3645 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3646 <&rpmhcc RPMH_CXO_CLK>;
3647 clock-names = "iface", "ref";
3649 status = "disabled";
3651 dsi_opp_table: dsi-opp-table {
3652 compatible = "operating-points-v2";
3655 opp-hz = /bits/ 64 <187500000>;
3656 required-opps = <&rpmhpd_opp_low_svs>;
3660 opp-hz = /bits/ 64 <300000000>;
3661 required-opps = <&rpmhpd_opp_svs>;
3665 opp-hz = /bits/ 64 <358000000>;
3666 required-opps = <&rpmhpd_opp_svs_l1>;
3672 dispcc: clock-controller@af00000 {
3673 compatible = "qcom,sm8250-dispcc";
3674 reg = <0 0x0af00000 0 0x10000>;
3675 power-domains = <&rpmhpd SM8250_MMCX>;
3676 required-opps = <&rpmhpd_opp_low_svs>;
3677 clocks = <&rpmhcc RPMH_CXO_CLK>,
3684 clock-names = "bi_tcxo",
3685 "dsi0_phy_pll_out_byteclk",
3686 "dsi0_phy_pll_out_dsiclk",
3687 "dsi1_phy_pll_out_byteclk",
3688 "dsi1_phy_pll_out_dsiclk",
3689 "dp_phy_pll_link_clk",
3690 "dp_phy_pll_vco_div_clk";
3693 #power-domain-cells = <1>;
3696 pdc: interrupt-controller@b220000 {
3697 compatible = "qcom,sm8250-pdc", "qcom,pdc";
3698 reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
3699 qcom,pdc-ranges = <0 480 94>, <94 609 31>,
3700 <125 63 1>, <126 716 12>;
3701 #interrupt-cells = <2>;
3702 interrupt-parent = <&intc>;
3703 interrupt-controller;
3706 tsens0: thermal-sensor@c263000 {
3707 compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
3708 reg = <0 0x0c263000 0 0x1ff>, /* TM */
3709 <0 0x0c222000 0 0x1ff>; /* SROT */
3710 #qcom,sensors = <16>;
3711 interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
3712 <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
3713 interrupt-names = "uplow", "critical";
3714 #thermal-sensor-cells = <1>;
3717 tsens1: thermal-sensor@c265000 {
3718 compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
3719 reg = <0 0x0c265000 0 0x1ff>, /* TM */
3720 <0 0x0c223000 0 0x1ff>; /* SROT */
3721 #qcom,sensors = <9>;
3722 interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
3723 <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
3724 interrupt-names = "uplow", "critical";
3725 #thermal-sensor-cells = <1>;
3728 aoss_qmp: power-controller@c300000 {
3729 compatible = "qcom,sm8250-aoss-qmp";
3730 reg = <0 0x0c300000 0 0x400>;
3731 interrupts-extended = <&ipcc IPCC_CLIENT_AOP
3732 IPCC_MPROC_SIGNAL_GLINK_QMP
3733 IRQ_TYPE_EDGE_RISING>;
3734 mboxes = <&ipcc IPCC_CLIENT_AOP
3735 IPCC_MPROC_SIGNAL_GLINK_QMP>;
3741 compatible = "qcom,rpmh-stats";
3742 reg = <0 0x0c3f0000 0 0x400>;
3745 spmi_bus: spmi@c440000 {
3746 compatible = "qcom,spmi-pmic-arb";
3747 reg = <0x0 0x0c440000 0x0 0x0001100>,
3748 <0x0 0x0c600000 0x0 0x2000000>,
3749 <0x0 0x0e600000 0x0 0x0100000>,
3750 <0x0 0x0e700000 0x0 0x00a0000>,
3751 <0x0 0x0c40a000 0x0 0x0026000>;
3752 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
3753 interrupt-names = "periph_irq";
3754 interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
3757 #address-cells = <2>;
3759 interrupt-controller;
3760 #interrupt-cells = <4>;
3763 tlmm: pinctrl@f100000 {
3764 compatible = "qcom,sm8250-pinctrl";
3765 reg = <0 0x0f100000 0 0x300000>,
3766 <0 0x0f500000 0 0x300000>,
3767 <0 0x0f900000 0 0x300000>;
3768 reg-names = "west", "south", "north";
3769 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
3772 interrupt-controller;
3773 #interrupt-cells = <2>;
3774 gpio-ranges = <&tlmm 0 0 181>;
3775 wakeup-parent = <&pdc>;
3777 cci0_default: cci0-default {
3778 cci0_i2c0_default: cci0-i2c0-default {
3780 pins = "gpio101", "gpio102";
3781 function = "cci_i2c";
3784 drive-strength = <2>; /* 2 mA */
3787 cci0_i2c1_default: cci0-i2c1-default {
3789 pins = "gpio103", "gpio104";
3790 function = "cci_i2c";
3793 drive-strength = <2>; /* 2 mA */
3797 cci0_sleep: cci0-sleep {
3798 cci0_i2c0_sleep: cci0-i2c0-sleep {
3800 pins = "gpio101", "gpio102";
3801 function = "cci_i2c";
3803 drive-strength = <2>; /* 2 mA */
3807 cci0_i2c1_sleep: cci0-i2c1-sleep {
3809 pins = "gpio103", "gpio104";
3810 function = "cci_i2c";
3812 drive-strength = <2>; /* 2 mA */
3817 cci1_default: cci1-default {
3818 cci1_i2c0_default: cci1-i2c0-default {
3820 pins = "gpio105","gpio106";
3821 function = "cci_i2c";
3824 drive-strength = <2>; /* 2 mA */
3827 cci1_i2c1_default: cci1-i2c1-default {
3829 pins = "gpio107","gpio108";
3830 function = "cci_i2c";
3833 drive-strength = <2>; /* 2 mA */
3837 cci1_sleep: cci1-sleep {
3838 cci1_i2c0_sleep: cci1-i2c0-sleep {
3840 pins = "gpio105","gpio106";
3841 function = "cci_i2c";
3844 drive-strength = <2>; /* 2 mA */
3847 cci1_i2c1_sleep: cci1-i2c1-sleep {
3849 pins = "gpio107","gpio108";
3850 function = "cci_i2c";
3853 drive-strength = <2>; /* 2 mA */
3857 pri_mi2s_active: pri-mi2s-active {
3860 function = "mi2s0_sck";
3861 drive-strength = <8>;
3867 function = "mi2s0_ws";
3868 drive-strength = <8>;
3874 function = "mi2s0_data0";
3875 drive-strength = <8>;
3882 function = "mi2s0_data1";
3883 drive-strength = <8>;
3888 qup_i2c0_default: qup-i2c0-default {
3890 pins = "gpio28", "gpio29";
3895 pins = "gpio28", "gpio29";
3896 drive-strength = <2>;
3901 qup_i2c1_default: qup-i2c1-default {
3903 pins = "gpio4", "gpio5";
3908 pins = "gpio4", "gpio5";
3909 drive-strength = <2>;
3914 qup_i2c2_default: qup-i2c2-default {
3916 pins = "gpio115", "gpio116";
3921 pins = "gpio115", "gpio116";
3922 drive-strength = <2>;
3927 qup_i2c3_default: qup-i2c3-default {
3929 pins = "gpio119", "gpio120";
3934 pins = "gpio119", "gpio120";
3935 drive-strength = <2>;
3940 qup_i2c4_default: qup-i2c4-default {
3942 pins = "gpio8", "gpio9";
3947 pins = "gpio8", "gpio9";
3948 drive-strength = <2>;
3953 qup_i2c5_default: qup-i2c5-default {
3955 pins = "gpio12", "gpio13";
3960 pins = "gpio12", "gpio13";
3961 drive-strength = <2>;
3966 qup_i2c6_default: qup-i2c6-default {
3968 pins = "gpio16", "gpio17";
3973 pins = "gpio16", "gpio17";
3974 drive-strength = <2>;
3979 qup_i2c7_default: qup-i2c7-default {
3981 pins = "gpio20", "gpio21";
3986 pins = "gpio20", "gpio21";
3987 drive-strength = <2>;
3992 qup_i2c8_default: qup-i2c8-default {
3994 pins = "gpio24", "gpio25";
3999 pins = "gpio24", "gpio25";
4000 drive-strength = <2>;
4005 qup_i2c9_default: qup-i2c9-default {
4007 pins = "gpio125", "gpio126";
4012 pins = "gpio125", "gpio126";
4013 drive-strength = <2>;
4018 qup_i2c10_default: qup-i2c10-default {
4020 pins = "gpio129", "gpio130";
4025 pins = "gpio129", "gpio130";
4026 drive-strength = <2>;
4031 qup_i2c11_default: qup-i2c11-default {
4033 pins = "gpio60", "gpio61";
4038 pins = "gpio60", "gpio61";
4039 drive-strength = <2>;
4044 qup_i2c12_default: qup-i2c12-default {
4046 pins = "gpio32", "gpio33";
4051 pins = "gpio32", "gpio33";
4052 drive-strength = <2>;
4057 qup_i2c13_default: qup-i2c13-default {
4059 pins = "gpio36", "gpio37";
4064 pins = "gpio36", "gpio37";
4065 drive-strength = <2>;
4070 qup_i2c14_default: qup-i2c14-default {
4072 pins = "gpio40", "gpio41";
4077 pins = "gpio40", "gpio41";
4078 drive-strength = <2>;
4083 qup_i2c15_default: qup-i2c15-default {
4085 pins = "gpio44", "gpio45";
4090 pins = "gpio44", "gpio45";
4091 drive-strength = <2>;
4096 qup_i2c16_default: qup-i2c16-default {
4098 pins = "gpio48", "gpio49";
4103 pins = "gpio48", "gpio49";
4104 drive-strength = <2>;
4109 qup_i2c17_default: qup-i2c17-default {
4111 pins = "gpio52", "gpio53";
4116 pins = "gpio52", "gpio53";
4117 drive-strength = <2>;
4122 qup_i2c18_default: qup-i2c18-default {
4124 pins = "gpio56", "gpio57";
4129 pins = "gpio56", "gpio57";
4130 drive-strength = <2>;
4135 qup_i2c19_default: qup-i2c19-default {
4137 pins = "gpio0", "gpio1";
4142 pins = "gpio0", "gpio1";
4143 drive-strength = <2>;
4148 qup_spi0_cs: qup-spi0-cs {
4153 qup_spi0_cs_gpio: qup-spi0-cs-gpio {
4158 qup_spi0_data_clk: qup-spi0-data-clk {
4159 pins = "gpio28", "gpio29",
4164 qup_spi1_cs: qup-spi1-cs {
4169 qup_spi1_cs_gpio: qup-spi1-cs-gpio {
4174 qup_spi1_data_clk: qup-spi1-data-clk {
4175 pins = "gpio4", "gpio5",
4180 qup_spi2_cs: qup-spi2-cs {
4185 qup_spi2_cs_gpio: qup-spi2-cs-gpio {
4190 qup_spi2_data_clk: qup-spi2-data-clk {
4191 pins = "gpio115", "gpio116",
4196 qup_spi3_cs: qup-spi3-cs {
4201 qup_spi3_cs_gpio: qup-spi3-cs-gpio {
4206 qup_spi3_data_clk: qup-spi3-data-clk {
4207 pins = "gpio119", "gpio120",
4212 qup_spi4_cs: qup-spi4-cs {
4217 qup_spi4_cs_gpio: qup-spi4-cs-gpio {
4222 qup_spi4_data_clk: qup-spi4-data-clk {
4223 pins = "gpio8", "gpio9",
4228 qup_spi5_cs: qup-spi5-cs {
4233 qup_spi5_cs_gpio: qup-spi5-cs-gpio {
4238 qup_spi5_data_clk: qup-spi5-data-clk {
4239 pins = "gpio12", "gpio13",
4244 qup_spi6_cs: qup-spi6-cs {
4249 qup_spi6_cs_gpio: qup-spi6-cs-gpio {
4254 qup_spi6_data_clk: qup-spi6-data-clk {
4255 pins = "gpio16", "gpio17",
4260 qup_spi7_cs: qup-spi7-cs {
4265 qup_spi7_cs_gpio: qup-spi7-cs-gpio {
4270 qup_spi7_data_clk: qup-spi7-data-clk {
4271 pins = "gpio20", "gpio21",
4276 qup_spi8_cs: qup-spi8-cs {
4281 qup_spi8_cs_gpio: qup-spi8-cs-gpio {
4286 qup_spi8_data_clk: qup-spi8-data-clk {
4287 pins = "gpio24", "gpio25",
4292 qup_spi9_cs: qup-spi9-cs {
4297 qup_spi9_cs_gpio: qup-spi9-cs-gpio {
4302 qup_spi9_data_clk: qup-spi9-data-clk {
4303 pins = "gpio125", "gpio126",
4308 qup_spi10_cs: qup-spi10-cs {
4313 qup_spi10_cs_gpio: qup-spi10-cs-gpio {
4318 qup_spi10_data_clk: qup-spi10-data-clk {
4319 pins = "gpio129", "gpio130",
4324 qup_spi11_cs: qup-spi11-cs {
4329 qup_spi11_cs_gpio: qup-spi11-cs-gpio {
4334 qup_spi11_data_clk: qup-spi11-data-clk {
4335 pins = "gpio60", "gpio61",
4340 qup_spi12_cs: qup-spi12-cs {
4345 qup_spi12_cs_gpio: qup-spi12-cs-gpio {
4350 qup_spi12_data_clk: qup-spi12-data-clk {
4351 pins = "gpio32", "gpio33",
4356 qup_spi13_cs: qup-spi13-cs {
4361 qup_spi13_cs_gpio: qup-spi13-cs-gpio {
4366 qup_spi13_data_clk: qup-spi13-data-clk {
4367 pins = "gpio36", "gpio37",
4372 qup_spi14_cs: qup-spi14-cs {
4377 qup_spi14_cs_gpio: qup-spi14-cs-gpio {
4382 qup_spi14_data_clk: qup-spi14-data-clk {
4383 pins = "gpio40", "gpio41",
4388 qup_spi15_cs: qup-spi15-cs {
4393 qup_spi15_cs_gpio: qup-spi15-cs-gpio {
4398 qup_spi15_data_clk: qup-spi15-data-clk {
4399 pins = "gpio44", "gpio45",
4404 qup_spi16_cs: qup-spi16-cs {
4409 qup_spi16_cs_gpio: qup-spi16-cs-gpio {
4414 qup_spi16_data_clk: qup-spi16-data-clk {
4415 pins = "gpio48", "gpio49",
4420 qup_spi17_cs: qup-spi17-cs {
4425 qup_spi17_cs_gpio: qup-spi17-cs-gpio {
4430 qup_spi17_data_clk: qup-spi17-data-clk {
4431 pins = "gpio52", "gpio53",
4436 qup_spi18_cs: qup-spi18-cs {
4441 qup_spi18_cs_gpio: qup-spi18-cs-gpio {
4446 qup_spi18_data_clk: qup-spi18-data-clk {
4447 pins = "gpio56", "gpio57",
4452 qup_spi19_cs: qup-spi19-cs {
4457 qup_spi19_cs_gpio: qup-spi19-cs-gpio {
4462 qup_spi19_data_clk: qup-spi19-data-clk {
4463 pins = "gpio0", "gpio1",
4468 qup_uart2_default: qup-uart2-default {
4470 pins = "gpio117", "gpio118";
4475 qup_uart6_default: qup-uart6-default {
4477 pins = "gpio16", "gpio17",
4483 qup_uart12_default: qup-uart12-default {
4485 pins = "gpio34", "gpio35";
4490 qup_uart17_default: qup-uart17-default {
4492 pins = "gpio52", "gpio53",
4498 qup_uart18_default: qup-uart18-default {
4500 pins = "gpio58", "gpio59";
4505 tert_mi2s_active: tert-mi2s-active {
4508 function = "mi2s2_sck";
4509 drive-strength = <8>;
4515 function = "mi2s2_data0";
4516 drive-strength = <8>;
4523 function = "mi2s2_ws";
4524 drive-strength = <8>;
4529 sdc2_sleep_state: sdc2-sleep {
4532 drive-strength = <2>;
4538 drive-strength = <2>;
4544 drive-strength = <2>;
4549 pcie0_default_state: pcie0-default {
4553 drive-strength = <2>;
4559 function = "pci_e0";
4560 drive-strength = <2>;
4567 drive-strength = <2>;
4572 pcie1_default_state: pcie1-default {
4576 drive-strength = <2>;
4582 function = "pci_e1";
4583 drive-strength = <2>;
4590 drive-strength = <2>;
4595 pcie2_default_state: pcie2-default {
4599 drive-strength = <2>;
4605 function = "pci_e2";
4606 drive-strength = <2>;
4613 drive-strength = <2>;
4619 apps_smmu: iommu@15000000 {
4620 compatible = "qcom,sm8250-smmu-500", "arm,mmu-500";
4621 reg = <0 0x15000000 0 0x100000>;
4623 #global-interrupts = <2>;
4624 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
4625 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
4626 <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
4627 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
4628 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
4629 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
4630 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
4631 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
4632 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
4633 <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
4634 <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
4635 <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
4636 <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
4637 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
4638 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
4639 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
4640 <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
4641 <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
4642 <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
4643 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
4644 <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
4645 <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
4646 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
4647 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
4648 <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
4649 <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
4650 <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
4651 <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
4652 <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
4653 <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
4654 <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
4655 <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
4656 <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
4657 <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
4658 <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
4659 <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
4660 <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
4661 <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
4662 <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
4663 <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
4664 <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
4665 <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
4666 <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
4667 <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
4668 <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
4669 <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
4670 <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
4671 <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
4672 <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
4673 <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
4674 <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
4675 <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
4676 <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
4677 <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
4678 <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
4679 <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
4680 <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
4681 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
4682 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
4683 <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
4684 <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
4685 <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
4686 <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
4687 <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
4688 <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
4689 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
4690 <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
4691 <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
4692 <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
4693 <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
4694 <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
4695 <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
4696 <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
4697 <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
4698 <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
4699 <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
4700 <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
4701 <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
4702 <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
4703 <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
4704 <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
4705 <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
4706 <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
4707 <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
4708 <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
4709 <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
4710 <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
4711 <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
4712 <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
4713 <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
4714 <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
4715 <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
4716 <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
4717 <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
4718 <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
4719 <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
4720 <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
4721 <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
4724 adsp: remoteproc@17300000 {
4725 compatible = "qcom,sm8250-adsp-pas";
4726 reg = <0 0x17300000 0 0x100>;
4728 interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
4729 <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
4730 <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
4731 <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
4732 <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
4733 interrupt-names = "wdog", "fatal", "ready",
4734 "handover", "stop-ack";
4736 clocks = <&rpmhcc RPMH_CXO_CLK>;
4739 power-domains = <&rpmhpd SM8250_LCX>,
4740 <&rpmhpd SM8250_LMX>;
4741 power-domain-names = "lcx", "lmx";
4743 memory-region = <&adsp_mem>;
4745 qcom,qmp = <&aoss_qmp>;
4747 qcom,smem-states = <&smp2p_adsp_out 0>;
4748 qcom,smem-state-names = "stop";
4750 status = "disabled";
4753 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
4754 IPCC_MPROC_SIGNAL_GLINK_QMP
4755 IRQ_TYPE_EDGE_RISING>;
4756 mboxes = <&ipcc IPCC_CLIENT_LPASS
4757 IPCC_MPROC_SIGNAL_GLINK_QMP>;
4760 qcom,remote-pid = <2>;
4763 compatible = "qcom,apr-v2";
4764 qcom,glink-channels = "apr_audio_svc";
4765 qcom,domain = <APR_DOMAIN_ADSP>;
4766 #address-cells = <1>;
4770 reg = <APR_SVC_ADSP_CORE>;
4771 compatible = "qcom,q6core";
4772 qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
4775 q6afe: apr-service@4 {
4776 compatible = "qcom,q6afe";
4777 reg = <APR_SVC_AFE>;
4778 qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
4780 compatible = "qcom,q6afe-dais";
4781 #address-cells = <1>;
4783 #sound-dai-cells = <1>;
4787 compatible = "qcom,q6afe-clocks";
4792 q6asm: apr-service@7 {
4793 compatible = "qcom,q6asm";
4794 reg = <APR_SVC_ASM>;
4795 qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
4797 compatible = "qcom,q6asm-dais";
4798 #address-cells = <1>;
4800 #sound-dai-cells = <1>;
4801 iommus = <&apps_smmu 0x1801 0x0>;
4805 q6adm: apr-service@8 {
4806 compatible = "qcom,q6adm";
4807 reg = <APR_SVC_ADM>;
4808 qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
4809 q6routing: routing {
4810 compatible = "qcom,q6adm-routing";
4811 #sound-dai-cells = <0>;
4817 compatible = "qcom,fastrpc";
4818 qcom,glink-channels = "fastrpcglink-apps-dsp";
4820 qcom,non-secure-domain;
4821 #address-cells = <1>;
4825 compatible = "qcom,fastrpc-compute-cb";
4827 iommus = <&apps_smmu 0x1803 0x0>;
4831 compatible = "qcom,fastrpc-compute-cb";
4833 iommus = <&apps_smmu 0x1804 0x0>;
4837 compatible = "qcom,fastrpc-compute-cb";
4839 iommus = <&apps_smmu 0x1805 0x0>;
4845 intc: interrupt-controller@17a00000 {
4846 compatible = "arm,gic-v3";
4847 #interrupt-cells = <3>;
4848 interrupt-controller;
4849 reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
4850 <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
4851 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
4855 compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
4856 reg = <0 0x17c10000 0 0x1000>;
4857 clocks = <&sleep_clk>;
4858 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
4862 #address-cells = <2>;
4865 compatible = "arm,armv7-timer-mem";
4866 reg = <0x0 0x17c20000 0x0 0x1000>;
4867 clock-frequency = <19200000>;
4871 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
4872 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
4873 reg = <0x0 0x17c21000 0x0 0x1000>,
4874 <0x0 0x17c22000 0x0 0x1000>;
4879 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
4880 reg = <0x0 0x17c23000 0x0 0x1000>;
4881 status = "disabled";
4886 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
4887 reg = <0x0 0x17c25000 0x0 0x1000>;
4888 status = "disabled";
4893 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
4894 reg = <0x0 0x17c27000 0x0 0x1000>;
4895 status = "disabled";
4900 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
4901 reg = <0x0 0x17c29000 0x0 0x1000>;
4902 status = "disabled";
4907 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
4908 reg = <0x0 0x17c2b000 0x0 0x1000>;
4909 status = "disabled";
4914 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
4915 reg = <0x0 0x17c2d000 0x0 0x1000>;
4916 status = "disabled";
4920 apps_rsc: rsc@18200000 {
4922 compatible = "qcom,rpmh-rsc";
4923 reg = <0x0 0x18200000 0x0 0x10000>,
4924 <0x0 0x18210000 0x0 0x10000>,
4925 <0x0 0x18220000 0x0 0x10000>;
4926 reg-names = "drv-0", "drv-1", "drv-2";
4927 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
4928 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
4929 <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
4930 qcom,tcs-offset = <0xd00>;
4932 qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
4933 <WAKE_TCS 3>, <CONTROL_TCS 1>;
4935 rpmhcc: clock-controller {
4936 compatible = "qcom,sm8250-rpmh-clk";
4939 clocks = <&xo_board>;
4942 rpmhpd: power-controller {
4943 compatible = "qcom,sm8250-rpmhpd";
4944 #power-domain-cells = <1>;
4945 operating-points-v2 = <&rpmhpd_opp_table>;
4947 rpmhpd_opp_table: opp-table {
4948 compatible = "operating-points-v2";
4950 rpmhpd_opp_ret: opp1 {
4951 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
4954 rpmhpd_opp_min_svs: opp2 {
4955 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
4958 rpmhpd_opp_low_svs: opp3 {
4959 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
4962 rpmhpd_opp_svs: opp4 {
4963 opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
4966 rpmhpd_opp_svs_l1: opp5 {
4967 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
4970 rpmhpd_opp_nom: opp6 {
4971 opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
4974 rpmhpd_opp_nom_l1: opp7 {
4975 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
4978 rpmhpd_opp_nom_l2: opp8 {
4979 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
4982 rpmhpd_opp_turbo: opp9 {
4983 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
4986 rpmhpd_opp_turbo_l1: opp10 {
4987 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
4992 apps_bcm_voter: bcm-voter {
4993 compatible = "qcom,bcm-voter";
4997 epss_l3: interconnect@18590000 {
4998 compatible = "qcom,sm8250-epss-l3";
4999 reg = <0 0x18590000 0 0x1000>;
5001 clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
5002 clock-names = "xo", "alternate";
5004 #interconnect-cells = <1>;
5007 cpufreq_hw: cpufreq@18591000 {
5008 compatible = "qcom,sm8250-cpufreq-epss", "qcom,cpufreq-epss";
5009 reg = <0 0x18591000 0 0x1000>,
5010 <0 0x18592000 0 0x1000>,
5011 <0 0x18593000 0 0x1000>;
5012 reg-names = "freq-domain0", "freq-domain1",
5015 clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
5016 clock-names = "xo", "alternate";
5017 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
5018 <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
5019 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
5020 interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
5021 #freq-domain-cells = <1>;
5026 compatible = "arm,armv8-timer";
5027 interrupts = <GIC_PPI 13
5028 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5030 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5032 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5034 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
5039 polling-delay-passive = <250>;
5040 polling-delay = <1000>;
5042 thermal-sensors = <&tsens0 1>;
5045 cpu0_alert0: trip-point0 {
5046 temperature = <90000>;
5047 hysteresis = <2000>;
5051 cpu0_alert1: trip-point1 {
5052 temperature = <95000>;
5053 hysteresis = <2000>;
5057 cpu0_crit: cpu_crit {
5058 temperature = <110000>;
5059 hysteresis = <1000>;
5066 trip = <&cpu0_alert0>;
5067 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5068 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5069 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5070 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5073 trip = <&cpu0_alert1>;
5074 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5075 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5076 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5077 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5083 polling-delay-passive = <250>;
5084 polling-delay = <1000>;
5086 thermal-sensors = <&tsens0 2>;
5089 cpu1_alert0: trip-point0 {
5090 temperature = <90000>;
5091 hysteresis = <2000>;
5095 cpu1_alert1: trip-point1 {
5096 temperature = <95000>;
5097 hysteresis = <2000>;
5101 cpu1_crit: cpu_crit {
5102 temperature = <110000>;
5103 hysteresis = <1000>;
5110 trip = <&cpu1_alert0>;
5111 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5112 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5113 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5114 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5117 trip = <&cpu1_alert1>;
5118 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5119 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5120 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5121 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5127 polling-delay-passive = <250>;
5128 polling-delay = <1000>;
5130 thermal-sensors = <&tsens0 3>;
5133 cpu2_alert0: trip-point0 {
5134 temperature = <90000>;
5135 hysteresis = <2000>;
5139 cpu2_alert1: trip-point1 {
5140 temperature = <95000>;
5141 hysteresis = <2000>;
5145 cpu2_crit: cpu_crit {
5146 temperature = <110000>;
5147 hysteresis = <1000>;
5154 trip = <&cpu2_alert0>;
5155 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5156 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5157 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5158 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5161 trip = <&cpu2_alert1>;
5162 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5163 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5164 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5165 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5171 polling-delay-passive = <250>;
5172 polling-delay = <1000>;
5174 thermal-sensors = <&tsens0 4>;
5177 cpu3_alert0: trip-point0 {
5178 temperature = <90000>;
5179 hysteresis = <2000>;
5183 cpu3_alert1: trip-point1 {
5184 temperature = <95000>;
5185 hysteresis = <2000>;
5189 cpu3_crit: cpu_crit {
5190 temperature = <110000>;
5191 hysteresis = <1000>;
5198 trip = <&cpu3_alert0>;
5199 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5200 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5201 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5202 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5205 trip = <&cpu3_alert1>;
5206 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5207 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5208 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5209 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5215 polling-delay-passive = <250>;
5216 polling-delay = <1000>;
5218 thermal-sensors = <&tsens0 7>;
5221 cpu4_top_alert0: trip-point0 {
5222 temperature = <90000>;
5223 hysteresis = <2000>;
5227 cpu4_top_alert1: trip-point1 {
5228 temperature = <95000>;
5229 hysteresis = <2000>;
5233 cpu4_top_crit: cpu_crit {
5234 temperature = <110000>;
5235 hysteresis = <1000>;
5242 trip = <&cpu4_top_alert0>;
5243 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5244 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5245 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5246 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5249 trip = <&cpu4_top_alert1>;
5250 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5251 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5252 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5253 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5259 polling-delay-passive = <250>;
5260 polling-delay = <1000>;
5262 thermal-sensors = <&tsens0 8>;
5265 cpu5_top_alert0: trip-point0 {
5266 temperature = <90000>;
5267 hysteresis = <2000>;
5271 cpu5_top_alert1: trip-point1 {
5272 temperature = <95000>;
5273 hysteresis = <2000>;
5277 cpu5_top_crit: cpu_crit {
5278 temperature = <110000>;
5279 hysteresis = <1000>;
5286 trip = <&cpu5_top_alert0>;
5287 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5288 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5289 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5290 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5293 trip = <&cpu5_top_alert1>;
5294 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5295 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5296 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5297 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5303 polling-delay-passive = <250>;
5304 polling-delay = <1000>;
5306 thermal-sensors = <&tsens0 9>;
5309 cpu6_top_alert0: trip-point0 {
5310 temperature = <90000>;
5311 hysteresis = <2000>;
5315 cpu6_top_alert1: trip-point1 {
5316 temperature = <95000>;
5317 hysteresis = <2000>;
5321 cpu6_top_crit: cpu_crit {
5322 temperature = <110000>;
5323 hysteresis = <1000>;
5330 trip = <&cpu6_top_alert0>;
5331 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5332 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5333 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5334 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5337 trip = <&cpu6_top_alert1>;
5338 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5339 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5340 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5341 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5347 polling-delay-passive = <250>;
5348 polling-delay = <1000>;
5350 thermal-sensors = <&tsens0 10>;
5353 cpu7_top_alert0: trip-point0 {
5354 temperature = <90000>;
5355 hysteresis = <2000>;
5359 cpu7_top_alert1: trip-point1 {
5360 temperature = <95000>;
5361 hysteresis = <2000>;
5365 cpu7_top_crit: cpu_crit {
5366 temperature = <110000>;
5367 hysteresis = <1000>;
5374 trip = <&cpu7_top_alert0>;
5375 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5376 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5377 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5378 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5381 trip = <&cpu7_top_alert1>;
5382 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5383 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5384 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5385 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5390 cpu4-bottom-thermal {
5391 polling-delay-passive = <250>;
5392 polling-delay = <1000>;
5394 thermal-sensors = <&tsens0 11>;
5397 cpu4_bottom_alert0: trip-point0 {
5398 temperature = <90000>;
5399 hysteresis = <2000>;
5403 cpu4_bottom_alert1: trip-point1 {
5404 temperature = <95000>;
5405 hysteresis = <2000>;
5409 cpu4_bottom_crit: cpu_crit {
5410 temperature = <110000>;
5411 hysteresis = <1000>;
5418 trip = <&cpu4_bottom_alert0>;
5419 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5420 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5421 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5422 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5425 trip = <&cpu4_bottom_alert1>;
5426 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5427 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5428 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5429 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5434 cpu5-bottom-thermal {
5435 polling-delay-passive = <250>;
5436 polling-delay = <1000>;
5438 thermal-sensors = <&tsens0 12>;
5441 cpu5_bottom_alert0: trip-point0 {
5442 temperature = <90000>;
5443 hysteresis = <2000>;
5447 cpu5_bottom_alert1: trip-point1 {
5448 temperature = <95000>;
5449 hysteresis = <2000>;
5453 cpu5_bottom_crit: cpu_crit {
5454 temperature = <110000>;
5455 hysteresis = <1000>;
5462 trip = <&cpu5_bottom_alert0>;
5463 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5464 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5465 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5466 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5469 trip = <&cpu5_bottom_alert1>;
5470 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5471 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5472 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5473 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5478 cpu6-bottom-thermal {
5479 polling-delay-passive = <250>;
5480 polling-delay = <1000>;
5482 thermal-sensors = <&tsens0 13>;
5485 cpu6_bottom_alert0: trip-point0 {
5486 temperature = <90000>;
5487 hysteresis = <2000>;
5491 cpu6_bottom_alert1: trip-point1 {
5492 temperature = <95000>;
5493 hysteresis = <2000>;
5497 cpu6_bottom_crit: cpu_crit {
5498 temperature = <110000>;
5499 hysteresis = <1000>;
5506 trip = <&cpu6_bottom_alert0>;
5507 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5508 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5509 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5510 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5513 trip = <&cpu6_bottom_alert1>;
5514 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5515 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5516 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5517 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5522 cpu7-bottom-thermal {
5523 polling-delay-passive = <250>;
5524 polling-delay = <1000>;
5526 thermal-sensors = <&tsens0 14>;
5529 cpu7_bottom_alert0: trip-point0 {
5530 temperature = <90000>;
5531 hysteresis = <2000>;
5535 cpu7_bottom_alert1: trip-point1 {
5536 temperature = <95000>;
5537 hysteresis = <2000>;
5541 cpu7_bottom_crit: cpu_crit {
5542 temperature = <110000>;
5543 hysteresis = <1000>;
5550 trip = <&cpu7_bottom_alert0>;
5551 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5552 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5553 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5554 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5557 trip = <&cpu7_bottom_alert1>;
5558 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5559 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5560 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5561 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5567 polling-delay-passive = <250>;
5568 polling-delay = <1000>;
5570 thermal-sensors = <&tsens0 0>;
5573 aoss0_alert0: trip-point0 {
5574 temperature = <90000>;
5575 hysteresis = <2000>;
5582 polling-delay-passive = <250>;
5583 polling-delay = <1000>;
5585 thermal-sensors = <&tsens0 5>;
5588 cluster0_alert0: trip-point0 {
5589 temperature = <90000>;
5590 hysteresis = <2000>;
5593 cluster0_crit: cluster0_crit {
5594 temperature = <110000>;
5595 hysteresis = <2000>;
5602 polling-delay-passive = <250>;
5603 polling-delay = <1000>;
5605 thermal-sensors = <&tsens0 6>;
5608 cluster1_alert0: trip-point0 {
5609 temperature = <90000>;
5610 hysteresis = <2000>;
5613 cluster1_crit: cluster1_crit {
5614 temperature = <110000>;
5615 hysteresis = <2000>;
5622 polling-delay-passive = <250>;
5623 polling-delay = <1000>;
5625 thermal-sensors = <&tsens0 15>;
5628 gpu1_alert0: trip-point0 {
5629 temperature = <90000>;
5630 hysteresis = <2000>;
5637 polling-delay-passive = <250>;
5638 polling-delay = <1000>;
5640 thermal-sensors = <&tsens1 0>;
5643 aoss1_alert0: trip-point0 {
5644 temperature = <90000>;
5645 hysteresis = <2000>;
5652 polling-delay-passive = <250>;
5653 polling-delay = <1000>;
5655 thermal-sensors = <&tsens1 1>;
5658 wlan_alert0: trip-point0 {
5659 temperature = <90000>;
5660 hysteresis = <2000>;
5667 polling-delay-passive = <250>;
5668 polling-delay = <1000>;
5670 thermal-sensors = <&tsens1 2>;
5673 video_alert0: trip-point0 {
5674 temperature = <90000>;
5675 hysteresis = <2000>;
5682 polling-delay-passive = <250>;
5683 polling-delay = <1000>;
5685 thermal-sensors = <&tsens1 3>;
5688 mem_alert0: trip-point0 {
5689 temperature = <90000>;
5690 hysteresis = <2000>;
5697 polling-delay-passive = <250>;
5698 polling-delay = <1000>;
5700 thermal-sensors = <&tsens1 4>;
5703 q6_hvx_alert0: trip-point0 {
5704 temperature = <90000>;
5705 hysteresis = <2000>;
5712 polling-delay-passive = <250>;
5713 polling-delay = <1000>;
5715 thermal-sensors = <&tsens1 5>;
5718 camera_alert0: trip-point0 {
5719 temperature = <90000>;
5720 hysteresis = <2000>;
5727 polling-delay-passive = <250>;
5728 polling-delay = <1000>;
5730 thermal-sensors = <&tsens1 6>;
5733 compute_alert0: trip-point0 {
5734 temperature = <90000>;
5735 hysteresis = <2000>;
5742 polling-delay-passive = <250>;
5743 polling-delay = <1000>;
5745 thermal-sensors = <&tsens1 7>;
5748 npu_alert0: trip-point0 {
5749 temperature = <90000>;
5750 hysteresis = <2000>;
5756 gpu-bottom-thermal {
5757 polling-delay-passive = <250>;
5758 polling-delay = <1000>;
5760 thermal-sensors = <&tsens1 8>;
5763 gpu2_alert0: trip-point0 {
5764 temperature = <90000>;
5765 hysteresis = <2000>;