arch/arm64/boot/dts/qcom/qrb5165-rb5.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2020, Linaro Ltd.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/leds/common.h>
   9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  10 #include <dt-bindings/sound/qcom,q6afe.h>
  11 #include <dt-bindings/sound/qcom,q6asm.h>
  12 #include <dt-bindings/usb/pd.h>
  13 #include "sm8250.dtsi"
  14 #include "pm8150.dtsi"
  15 #include "pm8150b.dtsi"
  16 #include "pm8150l.dtsi"
  17
  18 / {
  19         model = "Qualcomm Technologies, Inc. Robotics RB5";
  20         compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
  21         qcom,msm-id = <455 0x20001>;
  22         qcom,board-id = <11 3>;
  23
  24         aliases {
  25                 serial0 = &uart12;
  26                 sdhc2 = &sdhc_2;
  27         };
  28
  29         chosen {
  30                 stdout-path = "serial0:115200n8";
  31         };
  32
  33         /* Fixed crystal oscillator dedicated to MCP2518FD */
  34         clk40M: can-clock {
  35                 compatible = "fixed-clock";
  36                 #clock-cells = <0>;
  37                 clock-frequency = <40000000>;
  38         };
  39
  40         dc12v: dc12v-regulator {
  41                 compatible = "regulator-fixed";
  42                 regulator-name = "DC12V";
  43                 regulator-min-microvolt = <12000000>;
  44                 regulator-max-microvolt = <12000000>;
  45                 regulator-always-on;
  46         };
  47
  48         hdmi-out {
  49                 compatible = "hdmi-connector";
  50                 type = "a";
  51
  52                 port {
  53                         hdmi_con: endpoint {
  54                                 remote-endpoint = <&lt9611_out>;
  55                         };
  56                 };
  57         };
  58
  59         leds {
  60                 compatible = "gpio-leds";
  61
  62                 led-user4 {
  63                         label = "green:user4";
  64                         function = LED_FUNCTION_INDICATOR;
  65                         color = <LED_COLOR_ID_GREEN>;
  66                         gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
  67                         linux,default-trigger = "panic-indicator";
  68                         default-state = "off";
  69                 };
  70
  71                 led-wlan {
  72                         label = "yellow:wlan";
  73                         function = LED_FUNCTION_WLAN;
  74                         color = <LED_COLOR_ID_YELLOW>;
  75                         gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
  76                         linux,default-trigger = "phy0tx";
  77                         default-state = "off";
  78                 };
  79
  80                 led-bt {
  81                         label = "blue:bt";
  82                         function = LED_FUNCTION_BLUETOOTH;
  83                         color = <LED_COLOR_ID_BLUE>;
  84                         gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
  85                         linux,default-trigger = "bluetooth-power";
  86                         default-state = "off";
  87                 };
  88         };
  89
  90         lt9611_1v2: lt9611-vdd12-regulator {
  91                 compatible = "regulator-fixed";
  92                 regulator-name = "LT9611_1V2";
  93
  94                 vin-supply = <&vdc_3v3>;
  95                 regulator-min-microvolt = <1200000>;
  96                 regulator-max-microvolt = <1200000>;
  97         };
  98
  99         lt9611_3v3: lt9611-3v3 {
 100                 compatible = "regulator-fixed";
 101                 regulator-name = "LT9611_3V3";
 102
 103                 vin-supply = <&vdc_3v3>;
 104                 regulator-min-microvolt = <3300000>;
 105                 regulator-max-microvolt = <3300000>;
 106                 regulator-boot-on;
 107                 regulator-always-on;
 108         };
 109
 110         thermal-zones {
 111                 conn-thermal {
 112                         polling-delay-passive = <0>;
 113                         polling-delay = <0>;
 114                         thermal-sensors = <&pm8150b_adc_tm 0>;
 115
 116                         trips {
 117                                 active-config0 {
 118                                         temperature = <125000>;
 119                                         hysteresis = <1000>;
 120                                         type = "critical";
 121                                 };
 122                         };
 123                 };
 124
 125                 pm8150l-pcb-thermal {
 126                         polling-delay-passive = <0>;
 127                         polling-delay = <0>;
 128                         thermal-sensors = <&pm8150l_adc_tm 1>;
 129
 130                         trips {
 131                                 active-config0 {
 132                                         temperature = <50000>;
 133                                         hysteresis = <4000>;
 134                                         type = "passive";
 135                                 };
 136                         };
 137                 };
 138
 139                 skin-msm-thermal {
 140                         polling-delay-passive = <0>;
 141                         polling-delay = <0>;
 142                         thermal-sensors = <&pm8150l_adc_tm 0>;
 143
 144                         trips {
 145                                 active-config0 {
 146                                         temperature = <50000>;
 147                                         hysteresis = <4000>;
 148                                         type = "passive";
 149                                 };
 150                         };
 151                 };
 152
 153                 wifi-thermal {
 154                         polling-delay-passive = <0>;
 155                         polling-delay = <0>;
 156                         thermal-sensors = <&pm8150_adc_tm 1>;
 157
 158                         trips {
 159                                 active-config0 {
 160                                         temperature = <52000>;
 161                                         hysteresis = <4000>;
 162                                         type = "passive";
 163                                 };
 164                         };
 165                 };
 166
 167                 xo-thermal {
 168                         polling-delay-passive = <0>;
 169                         polling-delay = <0>;
 170                         thermal-sensors = <&pm8150_adc_tm 0>;
 171
 172                         trips {
 173                                 active-config0 {
 174                                         temperature = <50000>;
 175                                         hysteresis = <4000>;
 176                                         type = "passive";
 177                                 };
 178                         };
 179                 };
 180         };
 181
 182         vbat: vbat-regulator {
 183                 compatible = "regulator-fixed";
 184                 regulator-name = "VBAT";
 185                 vin-supply = <&vreg_l11c_3p3>;
 186                 regulator-min-microvolt = <4200000>;
 187                 regulator-max-microvolt = <4200000>;
 188                 regulator-always-on;
 189         };
 190
 191         vbat_som: vbat-som-regulator {
 192                 compatible = "regulator-fixed";
 193                 regulator-name = "VBAT_SOM";
 194                 vin-supply = <&dc12v>;
 195                 regulator-min-microvolt = <4200000>;
 196                 regulator-max-microvolt = <4200000>;
 197                 regulator-always-on;
 198         };
 199
 200         vdc_3v3: vdc-3v3-regulator {
 201                 compatible = "regulator-fixed";
 202                 regulator-name = "VDC_3V3";
 203                 vin-supply = <&vreg_l11c_3p3>;
 204                 regulator-min-microvolt = <3300000>;
 205                 regulator-max-microvolt = <3300000>;
 206                 regulator-always-on;
 207         };
 208
 209         vdc_5v: vdc-5v-regulator {
 210                 compatible = "regulator-fixed";
 211                 regulator-name = "VDC_5V";
 212
 213                 regulator-min-microvolt = <5000000>;
 214                 regulator-max-microvolt = <5000000>;
 215                 regulator-always-on;
 216                 vin-supply = <&vreg_l11c_3p3>;
 217         };
 218
 219         vph_pwr: vph-pwr-regulator {
 220                 compatible = "regulator-fixed";
 221                 regulator-name = "vph_pwr";
 222                 regulator-min-microvolt = <3700000>;
 223                 regulator-max-microvolt = <3700000>;
 224                 regulator-always-on;
 225         };
 226
 227         vreg_s4a_1p8: vreg-s4a-1p8 {
 228                 compatible = "regulator-fixed";
 229                 regulator-name = "vreg_s4a_1p8";
 230                 regulator-min-microvolt = <1800000>;
 231                 regulator-max-microvolt = <1800000>;
 232                 regulator-always-on;
 233         };
 234 };
 235
 236 &adsp {
 237         status = "okay";
 238         firmware-name = "qcom/sm8250/adsp.mbn";
 239 };
 240
 241 &apps_rsc {
 242         regulators-0 {
 243                 compatible = "qcom,pm8009-1-rpmh-regulators";
 244                 qcom,pmic-id = "f";
 245
 246                 vdd-s1-supply = <&vph_pwr>;
 247                 vdd-s2-supply = <&vph_pwr>;
 248                 vdd-l2-supply = <&vreg_s8c_1p3>;
 249                 vdd-l5-l6-supply = <&vreg_bob>;
 250                 vdd-l7-supply = <&vreg_s4a_1p8>;
 251
 252                 vreg_s2f_0p95: smps2 {
 253                         regulator-name = "vreg_s2f_0p95";
 254                         regulator-min-microvolt = <900000>;
 255                         regulator-max-microvolt = <952000>;
 256                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 257                 };
 258
 259                 vreg_l1f_1p1: ldo1 {
 260                         regulator-name = "vreg_l1f_1p1";
 261                         regulator-min-microvolt = <1104000>;
 262                         regulator-max-microvolt = <1104000>;
 263                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 264                 };
 265
 266                 vreg_l2f_1p2: ldo2 {
 267                         regulator-name = "vreg_l2f_1p2";
 268                         regulator-min-microvolt = <1200000>;
 269                         regulator-max-microvolt = <1200000>;
 270                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 271                 };
 272
 273                 vreg_l6f_2p8: ldo6 {
 274                         regulator-name = "vreg_l6f_2p8";
 275                         regulator-min-microvolt = <2800000>;
 276                         regulator-max-microvolt = <2800000>;
 277                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 278                 };
 279
 280                 vreg_l7f_1p8: ldo7 {
 281                         regulator-name = "vreg_l7f_1p8";
 282                         regulator-min-microvolt = <1800000>;
 283                         regulator-max-microvolt = <1800000>;
 284                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 285                 };
 286         };
 287
 288         regulators-1 {
 289                 compatible = "qcom,pm8150-rpmh-regulators";
 290                 qcom,pmic-id = "a";
 291
 292                 vdd-s1-supply = <&vph_pwr>;
 293                 vdd-s2-supply = <&vph_pwr>;
 294                 vdd-s3-supply = <&vph_pwr>;
 295                 vdd-s4-supply = <&vph_pwr>;
 296                 vdd-s5-supply = <&vph_pwr>;
 297                 vdd-s6-supply = <&vph_pwr>;
 298                 vdd-s7-supply = <&vph_pwr>;
 299                 vdd-s8-supply = <&vph_pwr>;
 300                 vdd-s9-supply = <&vph_pwr>;
 301                 vdd-s10-supply = <&vph_pwr>;
 302                 vdd-l2-l10-supply = <&vreg_bob>;
 303                 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
 304                 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
 305                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
 306                 vdd-l13-l16-l17-supply = <&vreg_bob>;
 307
 308                 vreg_l2a_3p1: ldo2 {
 309                         regulator-name = "vreg_l2a_3p1";
 310                         regulator-min-microvolt = <3072000>;
 311                         regulator-max-microvolt = <3072000>;
 312                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 313                 };
 314
 315                 vreg_l3a_0p9: ldo3 {
 316                         regulator-name = "vreg_l3a_0p9";
 317                         regulator-min-microvolt = <928000>;
 318                         regulator-max-microvolt = <932000>;
 319                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 320                 };
 321
 322                 vreg_l5a_0p88: ldo5 {
 323                         regulator-name = "vreg_l5a_0p88";
 324                         regulator-min-microvolt = <880000>;
 325                         regulator-max-microvolt = <880000>;
 326                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 327                 };
 328
 329                 vreg_l6a_1p2: ldo6 {
 330                         regulator-name = "vreg_l6a_1p2";
 331                         regulator-min-microvolt = <1200000>;
 332                         regulator-max-microvolt = <1200000>;
 333                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 334                 };
 335
 336                 vreg_l7a_1p7: ldo7 {
 337                         regulator-name = "vreg_l7a_1p7";
 338                         regulator-min-microvolt = <1704000>;
 339                         regulator-max-microvolt = <1800000>;
 340                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 341                 };
 342
 343                 vreg_l9a_1p2: ldo9 {
 344                         regulator-name = "vreg_l9a_1p2";
 345                         regulator-min-microvolt = <1200000>;
 346                         regulator-max-microvolt = <1200000>;
 347                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 348                 };
 349
 350                 vreg_l10a_1p8: ldo10 {
 351                         regulator-name = "vreg_l10a_1p8";
 352                         regulator-min-microvolt = <1800000>;
 353                         regulator-max-microvolt = <1800000>;
 354                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 355                 };
 356
 357                 vreg_l12a_1p8: ldo12 {
 358                         regulator-name = "vreg_l12a_1p8";
 359                         regulator-min-microvolt = <1800000>;
 360                         regulator-max-microvolt = <1800000>;
 361                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 362                 };
 363
 364                 vreg_l13a_ts_3p0: ldo13 {
 365                         regulator-name = "vreg_l13a_ts_3p0";
 366                         regulator-min-microvolt = <3008000>;
 367                         regulator-max-microvolt = <3008000>;
 368                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 369                 };
 370
 371                 vreg_l14a_1p8: ldo14 {
 372                         regulator-name = "vreg_l14a_1p8";
 373                         regulator-min-microvolt = <1800000>;
 374                         regulator-max-microvolt = <1880000>;
 375                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 376                 };
 377
 378                 vreg_l15a_1p8: ldo15 {
 379                         regulator-name = "vreg_l15a_1p8";
 380                         regulator-min-microvolt = <1800000>;
 381                         regulator-max-microvolt = <1800000>;
 382                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 383                 };
 384
 385                 vreg_l16a_2p7: ldo16 {
 386                         regulator-name = "vreg_l16a_2p7";
 387                         regulator-min-microvolt = <2704000>;
 388                         regulator-max-microvolt = <2960000>;
 389                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 390                 };
 391
 392                 vreg_l17a_3p0: ldo17 {
 393                         regulator-name = "vreg_l17a_3p0";
 394                         regulator-min-microvolt = <2856000>;
 395                         regulator-max-microvolt = <3008000>;
 396                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 397                 };
 398
 399                 vreg_l18a_0p92: ldo18 {
 400                         regulator-name = "vreg_l18a_0p92";
 401                         regulator-min-microvolt = <800000>;
 402                         regulator-max-microvolt = <912000>;
 403                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 404                 };
 405
 406                 vreg_s5a_1p9: smps5 {
 407                         regulator-name = "vreg_s5a_1p9";
 408                         regulator-min-microvolt = <1904000>;
 409                         regulator-max-microvolt = <2000000>;
 410                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 411                 };
 412
 413                 vreg_s6a_0p95: smps6 {
 414                         regulator-name = "vreg_s6a_0p95";
 415                         regulator-min-microvolt = <920000>;
 416                         regulator-max-microvolt = <1128000>;
 417                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 418                 };
 419         };
 420
 421         regulators-2 {
 422                 compatible = "qcom,pm8150l-rpmh-regulators";
 423                 qcom,pmic-id = "c";
 424
 425                 vdd-s1-supply = <&vph_pwr>;
 426                 vdd-s2-supply = <&vph_pwr>;
 427                 vdd-s3-supply = <&vph_pwr>;
 428                 vdd-s4-supply = <&vph_pwr>;
 429                 vdd-s5-supply = <&vph_pwr>;
 430                 vdd-s6-supply = <&vph_pwr>;
 431                 vdd-s7-supply = <&vph_pwr>;
 432                 vdd-s8-supply = <&vph_pwr>;
 433                 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
 434                 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
 435                 vdd-l4-l5-l6-supply = <&vreg_bob>;
 436                 vdd-l7-l11-supply = <&vreg_bob>;
 437                 vdd-l9-l10-supply = <&vreg_bob>;
 438                 vdd-bob-supply = <&vph_pwr>;
 439
 440                 vreg_bob: bob {
 441                         regulator-name = "vreg_bob";
 442                         regulator-min-microvolt = <3008000>;
 443                         regulator-max-microvolt = <4000000>;
 444                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 445                 };
 446
 447                 vreg_l1c_1p8: ldo1 {
 448                         regulator-name = "vreg_l1c_1p8";
 449                         regulator-min-microvolt = <1800000>;
 450                         regulator-max-microvolt = <1800000>;
 451                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 452                 };
 453
 454                 vreg_l2c_1p2: ldo2 {
 455                         regulator-name = "vreg_l2c_1p2";
 456                         regulator-min-microvolt = <1200000>;
 457                         regulator-max-microvolt = <1200000>;
 458                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 459                 };
 460
 461                 vreg_l3c_0p8: ldo3 {
 462                         regulator-name = "vreg_l3c_0p8";
 463                         regulator-min-microvolt = <800000>;
 464                         regulator-max-microvolt = <800000>;
 465                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 466                 };
 467
 468                 vreg_l4c_1p7: ldo4 {
 469                         regulator-name = "vreg_l4c_1p7";
 470                         regulator-min-microvolt = <1704000>;
 471                         regulator-max-microvolt = <2928000>;
 472                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 473                 };
 474
 475                 vreg_l5c_1p8: ldo5 {
 476                         regulator-name = "vreg_l5c_1p8";
 477                         regulator-min-microvolt = <1800000>;
 478                         regulator-max-microvolt = <2928000>;
 479                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 480                 };
 481
 482                 vreg_l6c_2p96: ldo6 {
 483                         regulator-name = "vreg_l6c_2p96";
 484                         regulator-min-microvolt = <1800000>;
 485                         regulator-max-microvolt = <2960000>;
 486                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 487                 };
 488
 489                 vreg_l7c_cam_vcm0_2p85: ldo7 {
 490                         regulator-name = "vreg_l7c_cam_vcm0_2p85";
 491                         regulator-min-microvolt = <2856000>;
 492                         regulator-max-microvolt = <3104000>;
 493                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 494                 };
 495
 496                 vreg_l8c_1p8: ldo8 {
 497                         regulator-name = "vreg_l8c_1p8";
 498                         regulator-min-microvolt = <1800000>;
 499                         regulator-max-microvolt = <1800000>;
 500                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 501                 };
 502
 503                 vreg_l9c_2p96: ldo9 {
 504                         regulator-name = "vreg_l9c_2p96";
 505                         regulator-min-microvolt = <2704000>;
 506                         regulator-max-microvolt = <2960000>;
 507                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 508                 };
 509
 510                 vreg_l10c_3p0: ldo10 {
 511                         regulator-name = "vreg_l10c_3p0";
 512                         regulator-min-microvolt = <3000000>;
 513                         regulator-max-microvolt = <3000000>;
 514                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 515                 };
 516
 517                 vreg_l11c_3p3: ldo11 {
 518                         regulator-name = "vreg_l11c_3p3";
 519                         regulator-min-microvolt = <3296000>;
 520                         regulator-max-microvolt = <3296000>;
 521                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 522                         regulator-always-on;
 523                 };
 524
 525                 vreg_s8c_1p3: smps8 {
 526                         regulator-name = "vreg_s8c_1p3";
 527                         regulator-min-microvolt = <1352000>;
 528                         regulator-max-microvolt = <1352000>;
 529                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 530                 };
 531         };
 532 };
 533
 534 &cdsp {
 535         status = "okay";
 536         firmware-name = "qcom/sm8250/cdsp.mbn";
 537 };
 538
 539 &gmu {
 540         status = "okay";
 541 };
 542
 543 &gpu {
 544         status = "okay";
 545
 546         zap-shader {
 547                 memory-region = <&gpu_mem>;
 548                 firmware-name = "qcom/sm8250/a650_zap.mbn";
 549         };
 550 };
 551
 552 /* LS-I2C0 */
 553 &i2c4 {
 554         status = "okay";
 555 };
 556
 557 &i2c5 {
 558         status = "okay";
 559         clock-frequency = <400000>;
 560
 561         lt9611_codec: hdmi-bridge@2b {
 562                 compatible = "lontium,lt9611uxc";
 563                 reg = <0x2b>;
 564                 #sound-dai-cells = <1>;
 565
 566                 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
 567
 568                 reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
 569
 570                 vdd-supply = <&lt9611_1v2>;
 571                 vcc-supply = <&lt9611_3v3>;
 572
 573                 pinctrl-names = "default";
 574                 pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
 575
 576                 ports {
 577                         #address-cells = <1>;
 578                         #size-cells = <0>;
 579
 580                         port@0 {
 581                                 reg = <0>;
 582
 583                                 lt9611_a: endpoint {
 584                                         remote-endpoint = <&mdss_dsi0_out>;
 585                                 };
 586                         };
 587
 588 #if 0
 589                         port@1 {
 590                                 reg = <1>;
 591
 592                                 lt9611_b: endpoint {
 593                                         remote-endpoint = <&mdss_dsi1_out>;
 594                                 };
 595                         };
 596 #endif
 597
 598                         port@2 {
 599                                 reg = <2>;
 600
 601                                 lt9611_out: endpoint {
 602                                         remote-endpoint = <&hdmi_con>;
 603                                 };
 604                         };
 605
 606                 };
 607         };
 608 };
 609
 610 /* LS-I2C1 */
 611 &i2c15 {
 612         status = "okay";
 613
 614         typec-mux@1c {
 615                 compatible = "onnn,nb7vpq904m";
 616                 reg = <0x1c>;
 617
 618                 vcc-supply = <&vreg_s4a_1p8>;
 619
 620                 retimer-switch;
 621                 orientation-switch;
 622
 623                 ports {
 624                         #address-cells = <1>;
 625                         #size-cells = <0>;
 626
 627                         port@0 {
 628                                 reg = <0>;
 629
 630                                 redriver_usb_con_ss: endpoint {
 631                                         remote-endpoint = <&pm8150b_typec_mux_in>;
 632                                 };
 633                         };
 634
 635                         port@1 {
 636                                 reg = <1>;
 637
 638                                 redriver_phy_con_ss: endpoint {
 639                                         remote-endpoint = <&usb_1_qmpphy_out>;
 640                                         data-lanes = <0 1 2 3>;
 641                                 };
 642                         };
 643
 644                         port@2 {
 645                                 reg = <2>;
 646
 647                                 redriver_usb_con_sbu: endpoint {
 648                                         remote-endpoint = <&pm8150b_typec_sbu_out>;
 649                                 };
 650                         };
 651                 };
 652         };
 653 };
 654
 655 &mdss {
 656         status = "okay";
 657 };
 658
 659 &mdss_dp {
 660         status = "okay";
 661 };
 662
 663 &mdss_dp_out {
 664         data-lanes = <0 1>;
 665         remote-endpoint = <&usb_1_qmpphy_dp_in>;
 666 };
 667
 668 &mdss_dsi0 {
 669         status = "okay";
 670         vdda-supply = <&vreg_l9a_1p2>;
 671
 672 #if 0
 673         qcom,dual-dsi-mode;
 674         qcom,master-dsi;
 675 #endif
 676
 677         ports {
 678                 port@1 {
 679                         endpoint {
 680                                 remote-endpoint = <&lt9611_a>;
 681                                 data-lanes = <0 1 2 3>;
 682                         };
 683                 };
 684         };
 685 };
 686
 687 &mdss_dsi0_phy {
 688         status = "okay";
 689         vdds-supply = <&vreg_l5a_0p88>;
 690 };
 691
 692 &pm8150_adc {
 693         channel@4c {
 694                 reg = <ADC5_XO_THERM_100K_PU>;
 695                 qcom,ratiometric;
 696                 qcom,hw-settle-time = <200>;
 697                 label = "xo_therm";
 698         };
 699
 700         channel@4e {
 701                 reg = <ADC5_AMUX_THM2_100K_PU>;
 702                 qcom,ratiometric;
 703                 qcom,hw-settle-time = <200>;
 704                 label = "wifi_therm";
 705         };
 706 };
 707
 708 &pm8150_adc_tm {
 709         status = "okay";
 710
 711         xo-therm@0 {
 712                 reg = <0>;
 713                 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
 714                 qcom,ratiometric;
 715                 qcom,hw-settle-time-us = <200>;
 716         };
 717
 718         wifi-therm@1 {
 719                 reg = <1>;
 720                 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
 721                 qcom,ratiometric;
 722                 qcom,hw-settle-time-us = <200>;
 723         };
 724 };
 725
 726 &pcie0 {
 727         status = "okay";
 728 };
 729
 730 &pcie0_phy {
 731         status = "okay";
 732         vdda-phy-supply = <&vreg_l5a_0p88>;
 733         vdda-pll-supply = <&vreg_l9a_1p2>;
 734 };
 735
 736 &pcie1 {
 737         status = "okay";
 738 };
 739
 740 &pcie1_phy {
 741         status = "okay";
 742         vdda-phy-supply = <&vreg_l5a_0p88>;
 743         vdda-pll-supply = <&vreg_l9a_1p2>;
 744 };
 745
 746 &pcie2 {
 747         status = "okay";
 748 };
 749
 750 &pcie2_phy {
 751         status = "okay";
 752         vdda-phy-supply = <&vreg_l5a_0p88>;
 753         vdda-pll-supply = <&vreg_l9a_1p2>;
 754 };
 755
 756 &pm8150_gpios {
 757         gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
 758         gpio-line-names =
 759                 "NC",
 760                 "OPTION2",
 761                 "PM_GPIO-F",
 762                 "PM_SLP_CLK_IN",
 763                 "OPTION1",
 764                 "VOL_UP_N",
 765                 "PM8250_GPIO7", /* Blue LED */
 766                 "SP_ARI_PWR_ALARM",
 767                 "GPIO_9_P", /* Yellow LED */
 768                 "GPIO_10_P"; /* Green LED */
 769 };
 770
 771 &pm8150b_adc {
 772         channel@4f {
 773                 reg = <ADC5_AMUX_THM3_100K_PU>;
 774                 qcom,ratiometric;
 775                 qcom,hw-settle-time = <200>;
 776                 label = "conn_therm";
 777         };
 778 };
 779
 780 &pm8150b_adc_tm {
 781         status = "okay";
 782
 783         conn-therm@0 {
 784                 reg = <0>;
 785                 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
 786                 qcom,ratiometric;
 787                 qcom,hw-settle-time-us = <200>;
 788         };
 789 };
 790
 791 &pm8150b_gpios {
 792         gpio-line-names =
 793                 "NC",
 794                 "NC",
 795                 "NC",
 796                 "NC",
 797                 "HAP_BOOST_EN", /* SOM */
 798                 "SMB_STAT", /* SOM */
 799                 "NC",
 800                 "NC",
 801                 "SDM_FORCE_USB_BOOT",
 802                 "NC",
 803                 "NC",
 804                 "NC";
 805 };
 806
 807 &pm8150l_adc {
 808         channel@4e {
 809                 reg = <ADC5_AMUX_THM2_100K_PU>;
 810                 qcom,ratiometric;
 811                 qcom,hw-settle-time = <200>;
 812                 label = "skin_msm_therm";
 813         };
 814
 815         channel@4f {
 816                 reg = <ADC5_AMUX_THM3_100K_PU>;
 817                 qcom,ratiometric;
 818                 qcom,hw-settle-time = <200>;
 819                 label = "pm8150l_therm";
 820         };
 821 };
 822
 823 &pm8150l_adc_tm {
 824         status = "okay";
 825
 826         skin-msm-therm@0 {
 827                 reg = <0>;
 828                 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
 829                 qcom,ratiometric;
 830                 qcom,hw-settle-time-us = <200>;
 831         };
 832
 833         pm8150l-therm@1 {
 834                 reg = <1>;
 835                 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
 836                 qcom,ratiometric;
 837                 qcom,hw-settle-time-us = <200>;
 838         };
 839 };
 840
 841 &pm8150l_gpios {
 842         gpio-line-names =
 843                 "NC",
 844                 "PM3003A_EN",
 845                 "NC",
 846                 "NC",
 847                 "PM_GPIO5", /* HDMI RST_N */
 848                 "PM_GPIO-A", /* PWM */
 849                 "PM_GPIO7",
 850                 "NC",
 851                 "NC",
 852                 "PM_GPIO-B",
 853                 "NC",
 854                 "PM3003A_MODE";
 855
 856         lt9611_rst_pin: lt9611-rst-state {
 857                 pins = "gpio5";
 858                 function = "normal";
 859
 860                 output-high;
 861                 input-disable;
 862                 power-source = <0>;
 863         };
 864 };
 865
 866 &pm8150l_lpg {
 867         status = "okay";
 868
 869         #address-cells = <1>;
 870         #size-cells = <0>;
 871
 872         led@1 {
 873                 reg = <1>;
 874                 color = <LED_COLOR_ID_GREEN>;
 875                 function = LED_FUNCTION_HEARTBEAT;
 876                 function-enumerator = <3>;
 877
 878                 linux,default-trigger = "heartbeat";
 879                 default-state = "on";
 880         };
 881
 882         led@2 {
 883                 reg = <2>;
 884                 color = <LED_COLOR_ID_GREEN>;
 885                 function = LED_FUNCTION_INDICATOR;
 886                 function-enumerator = <2>;
 887                 default-state = "on";
 888         };
 889
 890         led@3 {
 891                 reg = <3>;
 892                 color = <LED_COLOR_ID_GREEN>;
 893                 function = LED_FUNCTION_INDICATOR;
 894                 function-enumerator = <1>;
 895         };
 896 };
 897
 898 &pon_pwrkey {
 899         status = "okay";
 900 };
 901
 902 &pon_resin {
 903         status = "okay";
 904
 905         linux,code = <KEY_VOLUMEDOWN>;
 906 };
 907
 908 &qupv3_id_0 {
 909         status = "okay";
 910 };
 911
 912 &qupv3_id_1 {
 913         status = "okay";
 914 };
 915
 916 &qupv3_id_2 {
 917         status = "okay";
 918 };
 919
 920 &q6afedai {
 921         dai@16 {
 922                 reg = <PRIMARY_MI2S_RX>;
 923                 qcom,sd-lines = <0 1 2 3>;
 924         };
 925 };
 926
 927 /* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
 928 &q6afedai {
 929         dai@20 {
 930                 reg = <TERTIARY_MI2S_RX>;
 931                 qcom,sd-lines = <0>;
 932         };
 933 };
 934
 935 &q6asmdai {
 936         dai@0 {
 937                 reg = <0>;
 938         };
 939
 940         dai@1 {
 941                 reg = <1>;
 942         };
 943
 944         dai@2 {
 945                 reg = <2>;
 946         };
 947 };
 948
 949 &sdhc_2 {
 950         status = "okay";
 951         pinctrl-names = "default";
 952         pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
 953         vmmc-supply = <&vreg_l9c_2p96>;
 954         vqmmc-supply = <&vreg_l6c_2p96>;
 955         cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
 956         bus-width = <4>;
 957         no-sdio;
 958         no-mmc;
 959 };
 960
 961 &sound {
 962         compatible = "qcom,qrb5165-rb5-sndcard";
 963         pinctrl-0 = <&tert_mi2s_active>;
 964         pinctrl-names = "default";
 965         model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
 966         audio-routing =
 967                 "SpkrLeft IN", "WSA_SPK1 OUT",
 968                 "SpkrRight IN", "WSA_SPK2 OUT",
 969                 "VA DMIC0", "vdd-micb",
 970                 "VA DMIC1", "vdd-micb",
 971                 "MM_DL1",  "MultiMedia1 Playback",
 972                 "MM_DL2",  "MultiMedia2 Playback",
 973                 "MultiMedia3 Capture", "MM_UL3";
 974
 975         mm1-dai-link {
 976                 link-name = "MultiMedia1";
 977                 cpu {
 978                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
 979                 };
 980         };
 981
 982         mm2-dai-link {
 983                 link-name = "MultiMedia2";
 984                 cpu {
 985                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
 986                 };
 987         };
 988
 989         mm3-dai-link {
 990                 link-name = "MultiMedia3";
 991                 cpu {
 992                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
 993                 };
 994         };
 995
 996         hdmi-dai-link {
 997                 link-name = "HDMI Playback";
 998                 cpu {
 999                         sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
1000                 };
1001
1002                 platform {
1003                         sound-dai = <&q6routing>;
1004                 };
1005
1006                 codec {
1007                         sound-dai = <&lt9611_codec 0>;
1008                 };
1009         };
1010
1011         dma-dai-link {
1012                 link-name = "WSA Playback";
1013                 cpu {
1014                         sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
1015                 };
1016
1017                 platform {
1018                         sound-dai = <&q6routing>;
1019                 };
1020
1021                 codec {
1022                         sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
1023                 };
1024         };
1025
1026         va-dai-link {
1027                 link-name = "VA Capture";
1028                 cpu {
1029                         sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
1030                 };
1031
1032                 platform {
1033                         sound-dai = <&q6routing>;
1034                 };
1035
1036                 codec {
1037                         sound-dai = <&vamacro 0>;
1038                 };
1039         };
1040 };
1041
1042 /* CAN */
1043 &spi0 {
1044         status = "okay";
1045         pinctrl-names = "default";
1046         pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
1047         cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
1048
1049         can@0 {
1050                 compatible = "microchip,mcp2518fd";
1051                 reg = <0>;
1052                 clocks = <&clk40M>;
1053                 interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
1054                 spi-max-frequency = <10000000>;
1055                 vdd-supply = <&vdc_5v>;
1056                 xceiver-supply = <&vdc_5v>;
1057         };
1058 };
1059
1060 &swr0 {
1061         status = "okay";
1062
1063         left_spkr: speaker@0,3 {
1064                 compatible = "sdw10217211000";
1065                 reg = <0 3>;
1066                 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
1067                 #thermal-sensor-cells = <0>;
1068                 sound-name-prefix = "SpkrLeft";
1069                 #sound-dai-cells = <0>;
1070         };
1071
1072         right_spkr: speaker@0,4 {
1073                 compatible = "sdw10217211000";
1074                 reg = <0 4>;
1075                 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
1076                 #thermal-sensor-cells = <0>;
1077                 sound-name-prefix = "SpkrRight";
1078                 #sound-dai-cells = <0>;
1079         };
1080 };
1081
1082 &tlmm {
1083         gpio-reserved-ranges = <40 4>;
1084         gpio-line-names =
1085                 "GPIO-MM",
1086                 "GPIO-NN",
1087                 "GPIO-OO",
1088                 "GPIO-PP",
1089                 "GPIO-A",
1090                 "GPIO-C",
1091                 "GPIO-E",
1092                 "GPIO-D",
1093                 "I2C0-SDA",
1094                 "I2C0-SCL",
1095                 "GPIO-TT", /* GPIO_10 */
1096                 "NC",
1097                 "GPIO_12_I2C_SDA",
1098                 "GPIO_13_I2C_SCL",
1099                 "GPIO-X",
1100                 "GPIO_15_RGMII_INT",
1101                 "HST_BT_UART_CTS",
1102                 "HST_BT_UART_RFR",
1103                 "HST_BT_UART_TX",
1104                 "HST_BT_UART_RX",
1105                 "HST_WLAN_EN", /* GPIO_20 */
1106                 "HST_BT_EN",
1107                 "GPIO-AAA",
1108                 "GPIO-BBB",
1109                 "GPIO-CCC",
1110                 "GPIO-Z",
1111                 "GPIO-DDD",
1112                 "GPIO-BB",
1113                 "GPIO_28_CAN_SPI_MISO",
1114                 "GPIO_29_CAN_SPI_MOSI",
1115                 "GPIO_30_CAN_SPI_CLK", /* GPIO_30 */
1116                 "GPIO_31_CAN_SPI_CS",
1117                 "GPIO-UU",
1118                 "NC",
1119                 "UART1_TXD_SOM",
1120                 "UART1_RXD_SOM",
1121                 "UART0_CTS",
1122                 "UART0_RTS",
1123                 "UART0_TXD",
1124                 "UART0_RXD",
1125                 "SPI1_MISO", /* GPIO_40 */
1126                 "SPI1_MOSI",
1127                 "SPI1_CLK",
1128                 "SPI1_CS",
1129                 "I2C1_SDA",
1130                 "I2C1_SCL",
1131                 "GPIO-F",
1132                 "GPIO-JJ",
1133                 "Board_ID1",
1134                 "Board_ID2",
1135                 "NC", /* GPIO_50 */
1136                 "NC",
1137                 "SPI0_MISO",
1138                 "SPI0_MOSI",
1139                 "SPI0_SCLK",
1140                 "SPI0_CS",
1141                 "GPIO-QQ",
1142                 "GPIO-RR",
1143                 "USB2LAN_RESET",
1144                 "USB2LAN_EXTWAKE",
1145                 "NC", /* GPIO_60 */
1146                 "NC",
1147                 "NC",
1148                 "LT9611_INT",
1149                 "GPIO-AA",
1150                 "USB_CC_DIR",
1151                 "GPIO-G",
1152                 "GPIO-LL",
1153                 "USB_DP_HPD_1P8",
1154                 "NC",
1155                 "NC", /* GPIO_70 */
1156                 "SD_CMD",
1157                 "SD_DAT3",
1158                 "SD_SCLK",
1159                 "SD_DAT2",
1160                 "SD_DAT1",
1161                 "SD_DAT0", /* BOOT_CFG3 */
1162                 "SD_UFS_CARD_DET_N",
1163                 "GPIO-II",
1164                 "PCIE0_RST_N",
1165                 "PCIE0_CLK_REQ_N", /* GPIO_80 */
1166                 "PCIE0_WAKE_N",
1167                 "GPIO-CC",
1168                 "GPIO-DD",
1169                 "GPIO-EE",
1170                 "GPIO-FF",
1171                 "GPIO-GG",
1172                 "GPIO-HH",
1173                 "GPIO-VV",
1174                 "GPIO-WW",
1175                 "NC", /* GPIO_90 */
1176                 "NC",
1177                 "GPIO-K",
1178                 "GPIO-I",
1179                 "CSI0_MCLK",
1180                 "CSI1_MCLK",
1181                 "CSI2_MCLK",
1182                 "CSI3_MCLK",
1183                 "GPIO-AA", /* CSI4_MCLK */
1184                 "GPIO-BB", /* CSI5_MCLK */
1185                 "GPIO-KK", /* GPIO_100 */
1186                 "CCI_I2C_SDA0",
1187                 "CCI_I2C_SCL0",
1188                 "CCI_I2C_SDA1",
1189                 "CCI_I2C_SCL1",
1190                 "CCI_I2C_SDA2",
1191                 "CCI_I2C_SCL2",
1192                 "CCI_I2C_SDA3",
1193                 "CCI_I2C_SCL3",
1194                 "GPIO-L",
1195                 "NC", /* GPIO_110 */
1196                 "NC",
1197                 "ACCEL_INT",
1198                 "GYRO_INT",
1199                 "GPIO-J",
1200                 "GPIO-YY",
1201                 "GPIO-H",
1202                 "GPIO-ZZ",
1203                 "NC",
1204                 "NC",
1205                 "NC", /* GPIO_120 */
1206                 "NC",
1207                 "MAG_INT",
1208                 "MAG_DRDY_INT",
1209                 "HST_SW_CTRL",
1210                 "GPIO-M",
1211                 "GPIO-N",
1212                 "GPIO-O",
1213                 "GPIO-P",
1214                 "PS_INT",
1215                 "WSA1_EN", /* GPIO_130 */
1216                 "USB_HUB_RESET",
1217                 "SDM_FORCE_USB_BOOT",
1218                 "I2S1_CLK_HDMI",
1219                 "I2S1_DATA0_HDMI",
1220                 "I2S1_WS_HDMI",
1221                 "GPIO-B",
1222                 "GPIO_137", /* To LT9611_I2S_MCLK_3V3 */
1223                 "PCM_CLK",
1224                 "PCM_DI",
1225                 "PCM_DO", /* GPIO_140 */
1226                 "PCM_FS",
1227                 "HST_SLIM_CLK",
1228                 "HST_SLIM_DATA",
1229                 "GPIO-U",
1230                 "GPIO-Y",
1231                 "GPIO-R",
1232                 "GPIO-Q",
1233                 "GPIO-S",
1234                 "GPIO-T",
1235                 "GPIO-V", /* GPIO_150 */
1236                 "GPIO-W",
1237                 "DMIC_CLK1",
1238                 "DMIC_DATA1",
1239                 "DMIC_CLK2",
1240                 "DMIC_DATA2",
1241                 "WSA_SWR_CLK",
1242                 "WSA_SWR_DATA",
1243                 "DMIC_CLK3",
1244                 "DMIC_DATA3",
1245                 "I2C4_SDA", /* GPIO_160 */
1246                 "I2C4_SCL",
1247                 "SPI3_CS1",
1248                 "SPI3_CS2",
1249                 "SPI2_MISO_LS3",
1250                 "SPI2_MOSI_LS3",
1251                 "SPI2_CLK_LS3",
1252                 "SPI2_ACCEL_CS_LS3",
1253                 "SPI2_CS1",
1254                 "NC",
1255                 "GPIO-SS", /* GPIO_170 */
1256                 "GPIO-XX",
1257                 "SPI3_MISO",
1258                 "SPI3_MOSI",
1259                 "SPI3_CLK",
1260                 "SPI3_CS",
1261                 "HST_BLE_SNS_UART_TX",
1262                 "HST_BLE_SNS_UART_RX",
1263                 "HST_WLAN_UART_TX",
1264                 "HST_WLAN_UART_RX";
1265
1266         lt9611_irq_pin: lt9611-irq-state {
1267                 pins = "gpio63";
1268                 function = "gpio";
1269                 bias-disable;
1270         };
1271
1272         sdc2_default_state: sdc2-default-state {
1273                 clk-pins {
1274                         pins = "sdc2_clk";
1275                         bias-disable;
1276                         drive-strength = <16>;
1277                 };
1278
1279                 cmd-pins {
1280                         pins = "sdc2_cmd";
1281                         bias-pull-up;
1282                         drive-strength = <10>;
1283                 };
1284
1285                 data-pins {
1286                         pins = "sdc2_data";
1287                         bias-pull-up;
1288                         drive-strength = <10>;
1289                 };
1290         };
1291
1292         sdc2_card_det_n: sd-card-det-n-state {
1293                 pins = "gpio77";
1294                 function = "gpio";
1295                 bias-pull-up;
1296         };
1297 };
1298
1299 &uart12 {
1300         status = "okay";
1301 };
1302
1303 &ufs_mem_hc {
1304         status = "okay";
1305
1306         vcc-supply = <&vreg_l17a_3p0>;
1307         vcc-max-microamp = <800000>;
1308         vccq-supply = <&vreg_l6a_1p2>;
1309         vccq-max-microamp = <800000>;
1310         vccq2-supply = <&vreg_s4a_1p8>;
1311         vccq2-max-microamp = <800000>;
1312 };
1313
1314 &ufs_mem_phy {
1315         status = "okay";
1316
1317         vdda-phy-supply = <&vreg_l5a_0p88>;
1318         vdda-pll-supply = <&vreg_l9a_1p2>;
1319 };
1320
1321 &usb_1 {
1322         status = "okay";
1323 };
1324
1325 &usb_1_dwc3 {
1326         dr_mode = "otg";
1327         usb-role-switch;
1328 };
1329
1330 &usb_1_role_switch_out {
1331         remote-endpoint = <&pm8150b_role_switch_in>;
1332 };
1333
1334 &usb_1_hsphy {
1335         status = "okay";
1336
1337         vdda-pll-supply = <&vreg_l5a_0p88>;
1338         vdda33-supply = <&vreg_l2a_3p1>;
1339         vdda18-supply = <&vreg_l12a_1p8>;
1340 };
1341
1342 &usb_1_qmpphy {
1343         status = "okay";
1344
1345         vdda-phy-supply = <&vreg_l9a_1p2>;
1346         vdda-pll-supply = <&vreg_l18a_0p92>;
1347         orientation-switch;
1348 };
1349
1350 &usb_1_qmpphy_out {
1351         remote-endpoint = <&redriver_phy_con_ss>;
1352 };
1353
1354 &usb_2 {
1355         status = "okay";
1356 };
1357
1358 &usb_2_dwc3 {
1359         dr_mode = "host";
1360 };
1361
1362 &usb_2_hsphy {
1363         status = "okay";
1364
1365         vdda-pll-supply = <&vreg_l5a_0p88>;
1366         vdda33-supply = <&vreg_l2a_3p1>;
1367         vdda18-supply = <&vreg_l12a_1p8>;
1368 };
1369
1370 &usb_2_qmpphy {
1371         status = "okay";
1372
1373         vdda-phy-supply = <&vreg_l9a_1p2>;
1374         vdda-pll-supply = <&vreg_l18a_0p92>;
1375 };
1376
1377 &vamacro {
1378         pinctrl-0 = <&dmic01_active>;
1379         pinctrl-names = "default";
1380         vdd-micb-supply = <&vreg_s4a_1p8>;
1381         qcom,dmic-sample-rate = <600000>;
1382 };
1383
1384 &venus {
1385         status = "okay";
1386 };
1387
1388 &wsamacro {
1389         status = "okay";
1390 };
1391
1392 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
1393 &qup_spi0_cs_gpio {
1394         drive-strength = <6>;
1395         bias-disable;
1396 };
1397
1398 &qup_spi0_data_clk {
1399         drive-strength = <6>;
1400         bias-disable;
1401 };
1402
1403 &pm8150b_vbus {
1404         regulator-min-microamp = <500000>;
1405         regulator-max-microamp = <3000000>;
1406         status = "okay";
1407 };
1408
1409 &pm8150b_typec {
1410         status = "okay";
1411
1412         vdd-pdphy-supply = <&vreg_l2a_3p1>;
1413
1414         connector {
1415                 compatible = "usb-c-connector";
1416
1417                 power-role = "source";
1418                 data-role = "dual";
1419                 self-powered;
1420
1421                 source-pdos = <PDO_FIXED(5000, 3000,
1422                                          PDO_FIXED_DUAL_ROLE |
1423                                          PDO_FIXED_USB_COMM |
1424                                          PDO_FIXED_DATA_SWAP)>;
1425
1426                 altmodes {
1427                         displayport {
1428                                 svid = <0xff01>;
1429                                 vdo = <0x00001c46>;
1430                         };
1431                 };
1432
1433                 ports {
1434                         #address-cells = <1>;
1435                         #size-cells = <0>;
1436
1437                         port@0 {
1438                                 reg = <0>;
1439                                 pm8150b_role_switch_in: endpoint {
1440                                         remote-endpoint = <&usb_1_role_switch_out>;
1441                                 };
1442                         };
1443
1444                         port@1 {
1445                                 reg = <1>;
1446                                 pm8150b_typec_mux_in: endpoint {
1447                                         remote-endpoint = <&redriver_usb_con_ss>;
1448                                 };
1449                         };
1450
1451                         port@2 {
1452                                 reg = <2>;
1453
1454                                 pm8150b_typec_sbu_out: endpoint {
1455                                         remote-endpoint = <&redriver_usb_con_sbu>;
1456                                 };
1457                         };
1458                 };
1459         };
1460 };
1461
1462 &usb_1_qmpphy_dp_in {
1463         remote-endpoint = <&mdss_dp_out>;
1464 };