arch/arm64/boot/dts/qcom/msm8996.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
   3  */
   4
   5 #include <dt-bindings/interrupt-controller/arm-gic.h>
   6 #include <dt-bindings/clock/qcom,gcc-msm8996.h>
   7 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
   8 #include <dt-bindings/clock/qcom,rpmcc.h>
   9 #include <dt-bindings/soc/qcom,apr.h>
  10
  11 / {
  12         interrupt-parent = <&intc>;
  13
  14         #address-cells = <2>;
  15         #size-cells = <2>;
  16
  17         chosen { };
  18
  19         clocks {
  20                 xo_board: xo_board {
  21                         compatible = "fixed-clock";
  22                         #clock-cells = <0>;
  23                         clock-frequency = <19200000>;
  24                         clock-output-names = "xo_board";
  25                 };
  26
  27                 sleep_clk: sleep_clk {
  28                         compatible = "fixed-clock";
  29                         #clock-cells = <0>;
  30                         clock-frequency = <32764>;
  31                         clock-output-names = "sleep_clk";
  32                 };
  33         };
  34
  35         cpus {
  36                 #address-cells = <2>;
  37                 #size-cells = <0>;
  38
  39                 CPU0: cpu@0 {
  40                         device_type = "cpu";
  41                         compatible = "qcom,kryo";
  42                         reg = <0x0 0x0>;
  43                         enable-method = "psci";
  44                         cpu-idle-states = <&CPU_SLEEP_0>;
  45                         capacity-dmips-mhz = <1024>;
  46                         next-level-cache = <&L2_0>;
  47                         L2_0: l2-cache {
  48                               compatible = "cache";
  49                               cache-level = <2>;
  50                         };
  51                 };
  52
  53                 CPU1: cpu@1 {
  54                         device_type = "cpu";
  55                         compatible = "qcom,kryo";
  56                         reg = <0x0 0x1>;
  57                         enable-method = "psci";
  58                         cpu-idle-states = <&CPU_SLEEP_0>;
  59                         capacity-dmips-mhz = <1024>;
  60                         next-level-cache = <&L2_0>;
  61                 };
  62
  63                 CPU2: cpu@100 {
  64                         device_type = "cpu";
  65                         compatible = "qcom,kryo";
  66                         reg = <0x0 0x100>;
  67                         enable-method = "psci";
  68                         cpu-idle-states = <&CPU_SLEEP_0>;
  69                         capacity-dmips-mhz = <1024>;
  70                         next-level-cache = <&L2_1>;
  71                         L2_1: l2-cache {
  72                               compatible = "cache";
  73                               cache-level = <2>;
  74                         };
  75                 };
  76
  77                 CPU3: cpu@101 {
  78                         device_type = "cpu";
  79                         compatible = "qcom,kryo";
  80                         reg = <0x0 0x101>;
  81                         enable-method = "psci";
  82                         cpu-idle-states = <&CPU_SLEEP_0>;
  83                         capacity-dmips-mhz = <1024>;
  84                         next-level-cache = <&L2_1>;
  85                 };
  86
  87                 cpu-map {
  88                         cluster0 {
  89                                 core0 {
  90                                         cpu = <&CPU0>;
  91                                 };
  92
  93                                 core1 {
  94                                         cpu = <&CPU1>;
  95                                 };
  96                         };
  97
  98                         cluster1 {
  99                                 core0 {
 100                                         cpu = <&CPU2>;
 101                                 };
 102
 103                                 core1 {
 104                                         cpu = <&CPU3>;
 105                                 };
 106                         };
 107                 };
 108
 109                 idle-states {
 110                         entry-method = "psci";
 111
 112                         CPU_SLEEP_0: cpu-sleep-0 {
 113                                 compatible = "arm,idle-state";
 114                                 idle-state-name = "standalone-power-collapse";
 115                                 arm,psci-suspend-param = <0x00000004>;
 116                                 entry-latency-us = <130>;
 117                                 exit-latency-us = <80>;
 118                                 min-residency-us = <300>;
 119                         };
 120                 };
 121         };
 122
 123         firmware {
 124                 scm {
 125                         compatible = "qcom,scm-msm8996";
 126                         qcom,dload-mode = <&tcsr 0x13000>;
 127                 };
 128         };
 129
 130         tcsr_mutex: hwlock {
 131                 compatible = "qcom,tcsr-mutex";
 132                 syscon = <&tcsr_mutex_regs 0 0x1000>;
 133                 #hwlock-cells = <1>;
 134         };
 135
 136         memory {
 137                 device_type = "memory";
 138                 /* We expect the bootloader to fill in the reg */
 139                 reg = <0 0 0 0>;
 140         };
 141
 142         psci {
 143                 compatible = "arm,psci-1.0";
 144                 method = "smc";
 145         };
 146
 147         reserved-memory {
 148                 #address-cells = <2>;
 149                 #size-cells = <2>;
 150                 ranges;
 151
 152                 mba_region: mba@91500000 {
 153                         reg = <0x0 0x91500000 0x0 0x200000>;
 154                         no-map;
 155                 };
 156
 157                 slpi_region: slpi@90b00000 {
 158                         reg = <0x0 0x90b00000 0x0 0xa00000>;
 159                         no-map;
 160                 };
 161
 162                 venus_region: venus@90400000 {
 163                         reg = <0x0 0x90400000 0x0 0x700000>;
 164                         no-map;
 165                 };
 166
 167                 adsp_region: adsp@8ea00000 {
 168                         reg = <0x0 0x8ea00000 0x0 0x1a00000>;
 169                         no-map;
 170                 };
 171
 172                 mpss_region: mpss@88800000 {
 173                         reg = <0x0 0x88800000 0x0 0x6200000>;
 174                         no-map;
 175                 };
 176
 177                 smem_mem: smem-mem@86000000 {
 178                         reg = <0x0 0x86000000 0x0 0x200000>;
 179                         no-map;
 180                 };
 181
 182                 memory@85800000 {
 183                         reg = <0x0 0x85800000 0x0 0x800000>;
 184                         no-map;
 185                 };
 186
 187                 memory@86200000 {
 188                         reg = <0x0 0x86200000 0x0 0x2600000>;
 189                         no-map;
 190                 };
 191
 192                 rmtfs@86700000 {
 193                         compatible = "qcom,rmtfs-mem";
 194
 195                         size = <0x0 0x200000>;
 196                         alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
 197                         no-map;
 198
 199                         qcom,client-id = <1>;
 200                         qcom,vmid = <15>;
 201                 };
 202
 203                 zap_shader_region: gpu@8f200000 {
 204                         compatible = "shared-dma-pool";
 205                         reg = <0x0 0x90b00000 0x0 0xa00000>;
 206                         no-map;
 207                 };
 208         };
 209
 210         rpm-glink {
 211                 compatible = "qcom,glink-rpm";
 212
 213                 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 214
 215                 qcom,rpm-msg-ram = <&rpm_msg_ram>;
 216
 217                 mboxes = <&apcs_glb 0>;
 218
 219                 rpm_requests: rpm-requests {
 220                         compatible = "qcom,rpm-msm8996";
 221                         qcom,glink-channels = "rpm_requests";
 222
 223                         rpmcc: qcom,rpmcc {
 224                                 compatible = "qcom,rpmcc-msm8996";
 225                                 #clock-cells = <1>;
 226                         };
 227
 228                         rpmpd: power-controller {
 229                                 compatible = "qcom,msm8996-rpmpd";
 230                                 #power-domain-cells = <1>;
 231                                 operating-points-v2 = <&rpmpd_opp_table>;
 232
 233                                 rpmpd_opp_table: opp-table {
 234                                         compatible = "operating-points-v2";
 235
 236                                         rpmpd_opp1: opp1 {
 237                                                 opp-level = <1>;
 238                                         };
 239
 240                                         rpmpd_opp2: opp2 {
 241                                                 opp-level = <2>;
 242                                         };
 243
 244                                         rpmpd_opp3: opp3 {
 245                                                 opp-level = <3>;
 246                                         };
 247
 248                                         rpmpd_opp4: opp4 {
 249                                                 opp-level = <4>;
 250                                         };
 251
 252                                         rpmpd_opp5: opp5 {
 253                                                 opp-level = <5>;
 254                                         };
 255
 256                                         rpmpd_opp6: opp6 {
 257                                                 opp-level = <6>;
 258                                         };
 259                                 };
 260                         };
 261                 };
 262         };
 263
 264         smem {
 265                 compatible = "qcom,smem";
 266                 memory-region = <&smem_mem>;
 267                 hwlocks = <&tcsr_mutex 3>;
 268         };
 269
 270         smp2p-adsp {
 271                 compatible = "qcom,smp2p";
 272                 qcom,smem = <443>, <429>;
 273
 274                 interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
 275
 276                 mboxes = <&apcs_glb 10>;
 277
 278                 qcom,local-pid = <0>;
 279                 qcom,remote-pid = <2>;
 280
 281                 smp2p_adsp_out: master-kernel {
 282                         qcom,entry-name = "master-kernel";
 283                         #qcom,smem-state-cells = <1>;
 284                 };
 285
 286                 smp2p_adsp_in: slave-kernel {
 287                         qcom,entry-name = "slave-kernel";
 288
 289                         interrupt-controller;
 290                         #interrupt-cells = <2>;
 291                 };
 292         };
 293
 294         smp2p-modem {
 295                 compatible = "qcom,smp2p";
 296                 qcom,smem = <435>, <428>;
 297
 298                 interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
 299
 300                 mboxes = <&apcs_glb 14>;
 301
 302                 qcom,local-pid = <0>;
 303                 qcom,remote-pid = <1>;
 304
 305                 modem_smp2p_out: master-kernel {
 306                         qcom,entry-name = "master-kernel";
 307                         #qcom,smem-state-cells = <1>;
 308                 };
 309
 310                 modem_smp2p_in: slave-kernel {
 311                         qcom,entry-name = "slave-kernel";
 312
 313                         interrupt-controller;
 314                         #interrupt-cells = <2>;
 315                 };
 316         };
 317
 318         smp2p-slpi {
 319                 compatible = "qcom,smp2p";
 320                 qcom,smem = <481>, <430>;
 321
 322                 interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
 323
 324                 mboxes = <&apcs_glb 26>;
 325
 326                 qcom,local-pid = <0>;
 327                 qcom,remote-pid = <3>;
 328
 329                 smp2p_slpi_in: slave-kernel {
 330                         qcom,entry-name = "slave-kernel";
 331                         interrupt-controller;
 332                         #interrupt-cells = <2>;
 333                 };
 334
 335                 smp2p_slpi_out: master-kernel {
 336                         qcom,entry-name = "master-kernel";
 337                         #qcom,smem-state-cells = <1>;
 338                 };
 339         };
 340
 341         soc: soc {
 342                 #address-cells = <1>;
 343                 #size-cells = <1>;
 344                 ranges = <0 0 0 0xffffffff>;
 345                 compatible = "simple-bus";
 346
 347                 pcie_phy: phy@34000 {
 348                         compatible = "qcom,msm8996-qmp-pcie-phy";
 349                         reg = <0x00034000 0x488>;
 350                         #clock-cells = <1>;
 351                         #address-cells = <1>;
 352                         #size-cells = <1>;
 353                         ranges;
 354
 355                         clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 356                                 <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
 357                                 <&gcc GCC_PCIE_CLKREF_CLK>;
 358                         clock-names = "aux", "cfg_ahb", "ref";
 359
 360                         resets = <&gcc GCC_PCIE_PHY_BCR>,
 361                                 <&gcc GCC_PCIE_PHY_COM_BCR>,
 362                                 <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
 363                         reset-names = "phy", "common", "cfg";
 364                         status = "disabled";
 365
 366                         pciephy_0: lane@35000 {
 367                                 reg = <0x00035000 0x130>,
 368                                       <0x00035200 0x200>,
 369                                       <0x00035400 0x1dc>;
 370                                 #phy-cells = <0>;
 371
 372                                 clock-output-names = "pcie_0_pipe_clk_src";
 373                                 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 374                                 clock-names = "pipe0";
 375                                 resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 376                                 reset-names = "lane0";
 377                         };
 378
 379                         pciephy_1: lane@36000 {
 380                                 reg = <0x00036000 0x130>,
 381                                       <0x00036200 0x200>,
 382                                       <0x00036400 0x1dc>;
 383                                 #phy-cells = <0>;
 384
 385                                 clock-output-names = "pcie_1_pipe_clk_src";
 386                                 clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
 387                                 clock-names = "pipe1";
 388                                 resets = <&gcc GCC_PCIE_1_PHY_BCR>;
 389                                 reset-names = "lane1";
 390                         };
 391
 392                         pciephy_2: lane@37000 {
 393                                 reg = <0x00037000 0x130>,
 394                                       <0x00037200 0x200>,
 395                                       <0x00037400 0x1dc>;
 396                                 #phy-cells = <0>;
 397
 398                                 clock-output-names = "pcie_2_pipe_clk_src";
 399                                 clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
 400                                 clock-names = "pipe2";
 401                                 resets = <&gcc GCC_PCIE_2_PHY_BCR>;
 402                                 reset-names = "lane2";
 403                         };
 404                 };
 405
 406                 rpm_msg_ram: memory@68000 {
 407                         compatible = "qcom,rpm-msg-ram";
 408                         reg = <0x00068000 0x6000>;
 409                 };
 410
 411                 qfprom@74000 {
 412                         compatible = "qcom,qfprom";
 413                         reg = <0x00074000 0x8ff>;
 414                         #address-cells = <1>;
 415                         #size-cells = <1>;
 416
 417                         qusb2p_hstx_trim: hstx_trim@24e {
 418                                 reg = <0x24e 0x2>;
 419                                 bits = <5 4>;
 420                         };
 421
 422                         qusb2s_hstx_trim: hstx_trim@24f {
 423                                 reg = <0x24f 0x1>;
 424                                 bits = <1 4>;
 425                         };
 426
 427                         gpu_speed_bin: gpu_speed_bin@133 {
 428                                 reg = <0x133 0x1>;
 429                                 bits = <5 3>;
 430                         };
 431                 };
 432
 433                 rng: rng@83000 {
 434                         compatible = "qcom,prng-ee";
 435                         reg = <0x00083000 0x1000>;
 436                         clocks = <&gcc GCC_PRNG_AHB_CLK>;
 437                         clock-names = "core";
 438                 };
 439
 440                 gcc: clock-controller@300000 {
 441                         compatible = "qcom,gcc-msm8996";
 442                         #clock-cells = <1>;
 443                         #reset-cells = <1>;
 444                         #power-domain-cells = <1>;
 445                         reg = <0x00300000 0x90000>;
 446
 447                         clocks = <&rpmcc RPM_SMD_LN_BB_CLK>;
 448                         clock-names = "cxo2";
 449                 };
 450
 451                 tsens0: thermal-sensor@4a9000 {
 452                         compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 453                         reg = <0x004a9000 0x1000>, /* TM */
 454                               <0x004a8000 0x1000>; /* SROT */
 455                         #qcom,sensors = <13>;
 456                         interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
 457                                      <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
 458                         interrupt-names = "uplow", "critical";
 459                         #thermal-sensor-cells = <1>;
 460                 };
 461
 462                 tsens1: thermal-sensor@4ad000 {
 463                         compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 464                         reg = <0x004ad000 0x1000>, /* TM */
 465                               <0x004ac000 0x1000>; /* SROT */
 466                         #qcom,sensors = <8>;
 467                         interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
 468                                      <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
 469                         interrupt-names = "uplow", "critical";
 470                         #thermal-sensor-cells = <1>;
 471                 };
 472
 473                 tcsr_mutex_regs: syscon@740000 {
 474                         compatible = "syscon";
 475                         reg = <0x00740000 0x20000>;
 476                 };
 477
 478                 tcsr: syscon@7a0000 {
 479                         compatible = "qcom,tcsr-msm8996", "syscon";
 480                         reg = <0x007a0000 0x18000>;
 481                 };
 482
 483                 mmcc: clock-controller@8c0000 {
 484                         compatible = "qcom,mmcc-msm8996";
 485                         #clock-cells = <1>;
 486                         #reset-cells = <1>;
 487                         #power-domain-cells = <1>;
 488                         reg = <0x008c0000 0x40000>;
 489                         assigned-clocks = <&mmcc MMPLL9_PLL>,
 490                                           <&mmcc MMPLL1_PLL>,
 491                                           <&mmcc MMPLL3_PLL>,
 492                                           <&mmcc MMPLL4_PLL>,
 493                                           <&mmcc MMPLL5_PLL>;
 494                         assigned-clock-rates = <624000000>,
 495                                                <810000000>,
 496                                                <980000000>,
 497                                                <960000000>,
 498                                                <825000000>;
 499                 };
 500
 501                 mdss: mdss@900000 {
 502                         compatible = "qcom,mdss";
 503
 504                         reg = <0x00900000 0x1000>,
 505                               <0x009b0000 0x1040>,
 506                               <0x009b8000 0x1040>;
 507                         reg-names = "mdss_phys",
 508                                     "vbif_phys",
 509                                     "vbif_nrt_phys";
 510
 511                         power-domains = <&mmcc MDSS_GDSC>;
 512                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 513
 514                         interrupt-controller;
 515                         #interrupt-cells = <1>;
 516
 517                         clocks = <&mmcc MDSS_AHB_CLK>;
 518                         clock-names = "iface";
 519
 520                         #address-cells = <1>;
 521                         #size-cells = <1>;
 522                         ranges;
 523
 524                         mdp: mdp@901000 {
 525                                 compatible = "qcom,mdp5";
 526                                 reg = <0x00901000 0x90000>;
 527                                 reg-names = "mdp_phys";
 528
 529                                 interrupt-parent = <&mdss>;
 530                                 interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 531
 532                                 clocks = <&mmcc MDSS_AHB_CLK>,
 533                                          <&mmcc MDSS_AXI_CLK>,
 534                                          <&mmcc MDSS_MDP_CLK>,
 535                                          <&mmcc SMMU_MDP_AXI_CLK>,
 536                                          <&mmcc MDSS_VSYNC_CLK>;
 537                                 clock-names = "iface",
 538                                               "bus",
 539                                               "core",
 540                                               "iommu",
 541                                               "vsync";
 542
 543                                 iommus = <&mdp_smmu 0>;
 544
 545                                 ports {
 546                                         #address-cells = <1>;
 547                                         #size-cells = <0>;
 548
 549                                         port@0 {
 550                                                 reg = <0>;
 551                                                 mdp5_intf3_out: endpoint {
 552                                                         remote-endpoint = <&hdmi_in>;
 553                                                 };
 554                                         };
 555                                 };
 556                         };
 557
 558                         hdmi: hdmi-tx@9a0000 {
 559                                 compatible = "qcom,hdmi-tx-8996";
 560                                 reg =   <0x009a0000 0x50c>,
 561                                         <0x00070000 0x6158>,
 562                                         <0x009e0000 0xfff>;
 563                                 reg-names = "core_physical",
 564                                             "qfprom_physical",
 565                                             "hdcp_physical";
 566
 567                                 interrupt-parent = <&mdss>;
 568                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 569
 570                                 clocks = <&mmcc MDSS_MDP_CLK>,
 571                                          <&mmcc MDSS_AHB_CLK>,
 572                                          <&mmcc MDSS_HDMI_CLK>,
 573                                          <&mmcc MDSS_HDMI_AHB_CLK>,
 574                                          <&mmcc MDSS_EXTPCLK_CLK>;
 575                                 clock-names =
 576                                         "mdp_core",
 577                                         "iface",
 578                                         "core",
 579                                         "alt_iface",
 580                                         "extp";
 581
 582                                 phys = <&hdmi_phy>;
 583                                 phy-names = "hdmi_phy";
 584                                 #sound-dai-cells = <1>;
 585
 586                                 ports {
 587                                         #address-cells = <1>;
 588                                         #size-cells = <0>;
 589
 590                                         port@0 {
 591                                                 reg = <0>;
 592                                                 hdmi_in: endpoint {
 593                                                         remote-endpoint = <&mdp5_intf3_out>;
 594                                                 };
 595                                         };
 596                                 };
 597                         };
 598
 599                         hdmi_phy: hdmi-phy@9a0600 {
 600                                 #phy-cells = <0>;
 601                                 compatible = "qcom,hdmi-phy-8996";
 602                                 reg = <0x009a0600 0x1c4>,
 603                                       <0x009a0a00 0x124>,
 604                                       <0x009a0c00 0x124>,
 605                                       <0x009a0e00 0x124>,
 606                                       <0x009a1000 0x124>,
 607                                       <0x009a1200 0x0c8>;
 608                                 reg-names = "hdmi_pll",
 609                                             "hdmi_tx_l0",
 610                                             "hdmi_tx_l1",
 611                                             "hdmi_tx_l2",
 612                                             "hdmi_tx_l3",
 613                                             "hdmi_phy";
 614
 615                                 clocks = <&mmcc MDSS_AHB_CLK>,
 616                                          <&gcc GCC_HDMI_CLKREF_CLK>;
 617                                 clock-names = "iface",
 618                                               "ref";
 619                         };
 620                 };
 621                 gpu@b00000 {
 622                         compatible = "qcom,adreno-530.2", "qcom,adreno";
 623                         #stream-id-cells = <16>;
 624
 625                         reg = <0x00b00000 0x3f000>;
 626                         reg-names = "kgsl_3d0_reg_memory";
 627
 628                         interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
 629
 630                         clocks = <&mmcc GPU_GX_GFX3D_CLK>,
 631                                 <&mmcc GPU_AHB_CLK>,
 632                                 <&mmcc GPU_GX_RBBMTIMER_CLK>,
 633                                 <&gcc GCC_BIMC_GFX_CLK>,
 634                                 <&gcc GCC_MMSS_BIMC_GFX_CLK>;
 635
 636                         clock-names = "core",
 637                                 "iface",
 638                                 "rbbmtimer",
 639                                 "mem",
 640                                 "mem_iface";
 641
 642                         power-domains = <&mmcc GPU_GX_GDSC>;
 643                         iommus = <&adreno_smmu 0>;
 644
 645                         nvmem-cells = <&gpu_speed_bin>;
 646                         nvmem-cell-names = "speed_bin";
 647
 648                         qcom,gpu-quirk-two-pass-use-wfi;
 649                         qcom,gpu-quirk-fault-detect-mask;
 650
 651                         operating-points-v2 = <&gpu_opp_table>;
 652
 653                         gpu_opp_table: opp-table {
 654                                 compatible  ="operating-points-v2";
 655
 656                                 /*
 657                                  * 624Mhz and 560Mhz are only available on speed
 658                                  * bin (1 << 0). All the rest are available on
 659                                  * all bins of the hardware
 660                                  */
 661                                 opp-624000000 {
 662                                         opp-hz = /bits/ 64 <624000000>;
 663                                         opp-supported-hw = <0x01>;
 664                                 };
 665                                 opp-560000000 {
 666                                         opp-hz = /bits/ 64 <560000000>;
 667                                         opp-supported-hw = <0x01>;
 668                                 };
 669                                 opp-510000000 {
 670                                         opp-hz = /bits/ 64 <510000000>;
 671                                         opp-supported-hw = <0xFF>;
 672                                 };
 673                                 opp-401800000 {
 674                                         opp-hz = /bits/ 64 <401800000>;
 675                                         opp-supported-hw = <0xFF>;
 676                                 };
 677                                 opp-315000000 {
 678                                         opp-hz = /bits/ 64 <315000000>;
 679                                         opp-supported-hw = <0xFF>;
 680                                 };
 681                                 opp-214000000 {
 682                                         opp-hz = /bits/ 64 <214000000>;
 683                                         opp-supported-hw = <0xFF>;
 684                                 };
 685                                 opp-133000000 {
 686                                         opp-hz = /bits/ 64 <133000000>;
 687                                         opp-supported-hw = <0xFF>;
 688                                 };
 689                         };
 690
 691                         zap-shader {
 692                                 memory-region = <&zap_shader_region>;
 693                         };
 694                 };
 695
 696                 msmgpio: pinctrl@1010000 {
 697                         compatible = "qcom,msm8996-pinctrl";
 698                         reg = <0x01010000 0x300000>;
 699                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 700                         gpio-controller;
 701                         gpio-ranges = <&msmgpio 0 0 150>;
 702                         #gpio-cells = <2>;
 703                         interrupt-controller;
 704                         #interrupt-cells = <2>;
 705                 };
 706
 707                 spmi_bus: qcom,spmi@400f000 {
 708                         compatible = "qcom,spmi-pmic-arb";
 709                         reg = <0x0400f000 0x1000>,
 710                               <0x04400000 0x800000>,
 711                               <0x04c00000 0x800000>,
 712                               <0x05800000 0x200000>,
 713                               <0x0400a000 0x002100>;
 714                         reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 715                         interrupt-names = "periph_irq";
 716                         interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
 717                         qcom,ee = <0>;
 718                         qcom,channel = <0>;
 719                         #address-cells = <2>;
 720                         #size-cells = <0>;
 721                         interrupt-controller;
 722                         #interrupt-cells = <4>;
 723                 };
 724
 725                 agnoc@0 {
 726                         power-domains = <&gcc AGGRE0_NOC_GDSC>;
 727                         compatible = "simple-pm-bus";
 728                         #address-cells = <1>;
 729                         #size-cells = <1>;
 730                         ranges;
 731
 732                         pcie0: pcie@600000 {
 733                                 compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 734                                 status = "disabled";
 735                                 power-domains = <&gcc PCIE0_GDSC>;
 736                                 bus-range = <0x00 0xff>;
 737                                 num-lanes = <1>;
 738
 739                                 reg = <0x00600000 0x2000>,
 740                                       <0x0c000000 0xf1d>,
 741                                       <0x0c000f20 0xa8>,
 742                                       <0x0c100000 0x100000>;
 743                                 reg-names = "parf", "dbi", "elbi","config";
 744
 745                                 phys = <&pciephy_0>;
 746                                 phy-names = "pciephy";
 747
 748                                 #address-cells = <3>;
 749                                 #size-cells = <2>;
 750                                 ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
 751                                         <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
 752
 753                                 interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
 754                                 interrupt-names = "msi";
 755                                 #interrupt-cells = <1>;
 756                                 interrupt-map-mask = <0 0 0 0x7>;
 757                                 interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
 758                                                 <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
 759                                                 <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 760                                                 <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 761
 762                                 pinctrl-names = "default", "sleep";
 763                                 pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
 764                                 pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
 765
 766                                 linux,pci-domain = <0>;
 767
 768                                 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 769                                         <&gcc GCC_PCIE_0_AUX_CLK>,
 770                                         <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 771                                         <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
 772                                         <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
 773
 774                                 clock-names =  "pipe",
 775                                                 "aux",
 776                                                 "cfg",
 777                                                 "bus_master",
 778                                                 "bus_slave";
 779
 780                         };
 781
 782                         pcie1: pcie@608000 {
 783                                 compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 784                                 power-domains = <&gcc PCIE1_GDSC>;
 785                                 bus-range = <0x00 0xff>;
 786                                 num-lanes = <1>;
 787
 788                                 status  = "disabled";
 789
 790                                 reg = <0x00608000 0x2000>,
 791                                       <0x0d000000 0xf1d>,
 792                                       <0x0d000f20 0xa8>,
 793                                       <0x0d100000 0x100000>;
 794
 795                                 reg-names = "parf", "dbi", "elbi","config";
 796
 797                                 phys = <&pciephy_1>;
 798                                 phy-names = "pciephy";
 799
 800                                 #address-cells = <3>;
 801                                 #size-cells = <2>;
 802                                 ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
 803                                         <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
 804
 805                                 interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
 806                                 interrupt-names = "msi";
 807                                 #interrupt-cells = <1>;
 808                                 interrupt-map-mask = <0 0 0 0x7>;
 809                                 interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
 810                                                 <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
 811                                                 <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 812                                                 <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 813
 814                                 pinctrl-names = "default", "sleep";
 815                                 pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
 816                                 pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
 817
 818                                 linux,pci-domain = <1>;
 819
 820                                 clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 821                                         <&gcc GCC_PCIE_1_AUX_CLK>,
 822                                         <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 823                                         <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
 824                                         <&gcc GCC_PCIE_1_SLV_AXI_CLK>;
 825
 826                                 clock-names =  "pipe",
 827                                                 "aux",
 828                                                 "cfg",
 829                                                 "bus_master",
 830                                                 "bus_slave";
 831                         };
 832
 833                         pcie2: pcie@610000 {
 834                                 compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 835                                 power-domains = <&gcc PCIE2_GDSC>;
 836                                 bus-range = <0x00 0xff>;
 837                                 num-lanes = <1>;
 838                                 status = "disabled";
 839                                 reg = <0x00610000 0x2000>,
 840                                       <0x0e000000 0xf1d>,
 841                                       <0x0e000f20 0xa8>,
 842                                       <0x0e100000 0x100000>;
 843
 844                                 reg-names = "parf", "dbi", "elbi","config";
 845
 846                                 phys = <&pciephy_2>;
 847                                 phy-names = "pciephy";
 848
 849                                 #address-cells = <3>;
 850                                 #size-cells = <2>;
 851                                 ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
 852                                         <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
 853
 854                                 device_type = "pci";
 855
 856                                 interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
 857                                 interrupt-names = "msi";
 858                                 #interrupt-cells = <1>;
 859                                 interrupt-map-mask = <0 0 0 0x7>;
 860                                 interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
 861                                                 <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
 862                                                 <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 863                                                 <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 864
 865                                 pinctrl-names = "default", "sleep";
 866                                 pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
 867                                 pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
 868
 869                                 linux,pci-domain = <2>;
 870                                 clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
 871                                         <&gcc GCC_PCIE_2_AUX_CLK>,
 872                                         <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
 873                                         <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
 874                                         <&gcc GCC_PCIE_2_SLV_AXI_CLK>;
 875
 876                                 clock-names =  "pipe",
 877                                                 "aux",
 878                                                 "cfg",
 879                                                 "bus_master",
 880                                                 "bus_slave";
 881                         };
 882                 };
 883
 884                 ufshc: ufshc@624000 {
 885                         compatible = "qcom,ufshc";
 886                         reg = <0x00624000 0x2500>;
 887                         interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 888
 889                         phys = <&ufsphy_lane>;
 890                         phy-names = "ufsphy";
 891
 892                         power-domains = <&gcc UFS_GDSC>;
 893
 894                         clock-names =
 895                                 "core_clk_src",
 896                                 "core_clk",
 897                                 "bus_clk",
 898                                 "bus_aggr_clk",
 899                                 "iface_clk",
 900                                 "core_clk_unipro_src",
 901                                 "core_clk_unipro",
 902                                 "core_clk_ice",
 903                                 "ref_clk",
 904                                 "tx_lane0_sync_clk",
 905                                 "rx_lane0_sync_clk";
 906                         clocks =
 907                                 <&gcc UFS_AXI_CLK_SRC>,
 908                                 <&gcc GCC_UFS_AXI_CLK>,
 909                                 <&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
 910                                 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 911                                 <&gcc GCC_UFS_AHB_CLK>,
 912                                 <&gcc UFS_ICE_CORE_CLK_SRC>,
 913                                 <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
 914                                 <&gcc GCC_UFS_ICE_CORE_CLK>,
 915                                 <&rpmcc RPM_SMD_LN_BB_CLK>,
 916                                 <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
 917                                 <&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
 918                         freq-table-hz =
 919                                 <100000000 200000000>,
 920                                 <0 0>,
 921                                 <0 0>,
 922                                 <0 0>,
 923                                 <0 0>,
 924                                 <150000000 300000000>,
 925                                 <0 0>,
 926                                 <0 0>,
 927                                 <0 0>,
 928                                 <0 0>,
 929                                 <0 0>;
 930
 931                         lanes-per-direction = <1>;
 932                         #reset-cells = <1>;
 933                         status = "disabled";
 934
 935                         ufs_variant {
 936                                 compatible = "qcom,ufs_variant";
 937                         };
 938                 };
 939
 940                 ufsphy: phy@627000 {
 941                         compatible = "qcom,msm8996-qmp-ufs-phy";
 942                         reg = <0x00627000 0x1c4>;
 943                         #address-cells = <1>;
 944                         #size-cells = <1>;
 945                         ranges;
 946
 947                         clocks = <&gcc GCC_UFS_CLKREF_CLK>;
 948                         clock-names = "ref";
 949
 950                         resets = <&ufshc 0>;
 951                         reset-names = "ufsphy";
 952                         status = "disabled";
 953
 954                         ufsphy_lane: lanes@627400 {
 955                                 reg = <0x627400 0x12c>,
 956                                       <0x627600 0x200>,
 957                                       <0x627c00 0x1b4>;
 958                                 #phy-cells = <0>;
 959                         };
 960                 };
 961
 962                 camss: camss@a00000 {
 963                         compatible = "qcom,msm8996-camss";
 964                         reg = <0x00a34000 0x1000>,
 965                               <0x00a00030 0x4>,
 966                               <0x00a35000 0x1000>,
 967                               <0x00a00038 0x4>,
 968                               <0x00a36000 0x1000>,
 969                               <0x00a00040 0x4>,
 970                               <0x00a30000 0x100>,
 971                               <0x00a30400 0x100>,
 972                               <0x00a30800 0x100>,
 973                               <0x00a30c00 0x100>,
 974                               <0x00a31000 0x500>,
 975                               <0x00a00020 0x10>,
 976                               <0x00a10000 0x1000>,
 977                               <0x00a14000 0x1000>;
 978                         reg-names = "csiphy0",
 979                                 "csiphy0_clk_mux",
 980                                 "csiphy1",
 981                                 "csiphy1_clk_mux",
 982                                 "csiphy2",
 983                                 "csiphy2_clk_mux",
 984                                 "csid0",
 985                                 "csid1",
 986                                 "csid2",
 987                                 "csid3",
 988                                 "ispif",
 989                                 "csi_clk_mux",
 990                                 "vfe0",
 991                                 "vfe1";
 992                         interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
 993                                 <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
 994                                 <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
 995                                 <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
 996                                 <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
 997                                 <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
 998                                 <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
 999                                 <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
1000                                 <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
1001                                 <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
1002                         interrupt-names = "csiphy0",
1003                                 "csiphy1",
1004                                 "csiphy2",
1005                                 "csid0",
1006                                 "csid1",
1007                                 "csid2",
1008                                 "csid3",
1009                                 "ispif",
1010                                 "vfe0",
1011                                 "vfe1";
1012                         power-domains = <&mmcc VFE0_GDSC>,
1013                                         <&mmcc VFE1_GDSC>;
1014                         clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
1015                                 <&mmcc CAMSS_ISPIF_AHB_CLK>,
1016                                 <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
1017                                 <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
1018                                 <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
1019                                 <&mmcc CAMSS_CSI0_AHB_CLK>,
1020                                 <&mmcc CAMSS_CSI0_CLK>,
1021                                 <&mmcc CAMSS_CSI0PHY_CLK>,
1022                                 <&mmcc CAMSS_CSI0PIX_CLK>,
1023                                 <&mmcc CAMSS_CSI0RDI_CLK>,
1024                                 <&mmcc CAMSS_CSI1_AHB_CLK>,
1025                                 <&mmcc CAMSS_CSI1_CLK>,
1026                                 <&mmcc CAMSS_CSI1PHY_CLK>,
1027                                 <&mmcc CAMSS_CSI1PIX_CLK>,
1028                                 <&mmcc CAMSS_CSI1RDI_CLK>,
1029                                 <&mmcc CAMSS_CSI2_AHB_CLK>,
1030                                 <&mmcc CAMSS_CSI2_CLK>,
1031                                 <&mmcc CAMSS_CSI2PHY_CLK>,
1032                                 <&mmcc CAMSS_CSI2PIX_CLK>,
1033                                 <&mmcc CAMSS_CSI2RDI_CLK>,
1034                                 <&mmcc CAMSS_CSI3_AHB_CLK>,
1035                                 <&mmcc CAMSS_CSI3_CLK>,
1036                                 <&mmcc CAMSS_CSI3PHY_CLK>,
1037                                 <&mmcc CAMSS_CSI3PIX_CLK>,
1038                                 <&mmcc CAMSS_CSI3RDI_CLK>,
1039                                 <&mmcc CAMSS_AHB_CLK>,
1040                                 <&mmcc CAMSS_VFE0_CLK>,
1041                                 <&mmcc CAMSS_CSI_VFE0_CLK>,
1042                                 <&mmcc CAMSS_VFE0_AHB_CLK>,
1043                                 <&mmcc CAMSS_VFE0_STREAM_CLK>,
1044                                 <&mmcc CAMSS_VFE1_CLK>,
1045                                 <&mmcc CAMSS_CSI_VFE1_CLK>,
1046                                 <&mmcc CAMSS_VFE1_AHB_CLK>,
1047                                 <&mmcc CAMSS_VFE1_STREAM_CLK>,
1048                                 <&mmcc CAMSS_VFE_AHB_CLK>,
1049                                 <&mmcc CAMSS_VFE_AXI_CLK>;
1050                         clock-names = "top_ahb",
1051                                 "ispif_ahb",
1052                                 "csiphy0_timer",
1053                                 "csiphy1_timer",
1054                                 "csiphy2_timer",
1055                                 "csi0_ahb",
1056                                 "csi0",
1057                                 "csi0_phy",
1058                                 "csi0_pix",
1059                                 "csi0_rdi",
1060                                 "csi1_ahb",
1061                                 "csi1",
1062                                 "csi1_phy",
1063                                 "csi1_pix",
1064                                 "csi1_rdi",
1065                                 "csi2_ahb",
1066                                 "csi2",
1067                                 "csi2_phy",
1068                                 "csi2_pix",
1069                                 "csi2_rdi",
1070                                 "csi3_ahb",
1071                                 "csi3",
1072                                 "csi3_phy",
1073                                 "csi3_pix",
1074                                 "csi3_rdi",
1075                                 "ahb",
1076                                 "vfe0",
1077                                 "csi_vfe0",
1078                                 "vfe0_ahb",
1079                                 "vfe0_stream",
1080                                 "vfe1",
1081                                 "csi_vfe1",
1082                                 "vfe1_ahb",
1083                                 "vfe1_stream",
1084                                 "vfe_ahb",
1085                                 "vfe_axi";
1086                         iommus = <&vfe_smmu 0>,
1087                                  <&vfe_smmu 1>,
1088                                  <&vfe_smmu 2>,
1089                                  <&vfe_smmu 3>;
1090                         status = "disabled";
1091                         ports {
1092                                 #address-cells = <1>;
1093                                 #size-cells = <0>;
1094                         };
1095                 };
1096
1097                 cci: cci@a0c000 {
1098                         compatible = "qcom,msm8996-cci";
1099                         #address-cells = <1>;
1100                         #size-cells = <0>;
1101                         reg = <0xa0c000 0x1000>;
1102                         interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
1103                         power-domains = <&mmcc CAMSS_GDSC>;
1104                         clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
1105                                  <&mmcc CAMSS_CCI_AHB_CLK>,
1106                                  <&mmcc CAMSS_CCI_CLK>,
1107                                  <&mmcc CAMSS_AHB_CLK>;
1108                         clock-names = "camss_top_ahb",
1109                                       "cci_ahb",
1110                                       "cci",
1111                                       "camss_ahb";
1112                         assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
1113                                           <&mmcc CAMSS_CCI_CLK>;
1114                         assigned-clock-rates = <80000000>, <37500000>;
1115                         pinctrl-names = "default";
1116                         pinctrl-0 = <&cci0_default &cci1_default>;
1117                         status = "disabled";
1118
1119                         cci_i2c0: i2c-bus@0 {
1120                                 reg = <0>;
1121                                 clock-frequency = <400000>;
1122                                 #address-cells = <1>;
1123                                 #size-cells = <0>;
1124                         };
1125
1126                         cci_i2c1: i2c-bus@1 {
1127                                 reg = <1>;
1128                                 clock-frequency = <400000>;
1129                                 #address-cells = <1>;
1130                                 #size-cells = <0>;
1131                         };
1132                 };
1133
1134                 adreno_smmu: iommu@b40000 {
1135                         compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
1136                         reg = <0x00b40000 0x10000>;
1137
1138                         #global-interrupts = <1>;
1139                         interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
1140                                      <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
1141                                      <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
1142                         #iommu-cells = <1>;
1143
1144                         clocks = <&mmcc GPU_AHB_CLK>,
1145                                  <&gcc GCC_MMSS_BIMC_GFX_CLK>;
1146                         clock-names = "iface", "bus";
1147
1148                         power-domains = <&mmcc GPU_GDSC>;
1149                 };
1150
1151                 video-codec@c00000 {
1152                         compatible = "qcom,msm8996-venus";
1153                         reg = <0x00c00000 0xff000>;
1154                         interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
1155                         power-domains = <&mmcc VENUS_GDSC>;
1156                         clocks = <&mmcc VIDEO_CORE_CLK>,
1157                                  <&mmcc VIDEO_AHB_CLK>,
1158                                  <&mmcc VIDEO_AXI_CLK>,
1159                                  <&mmcc VIDEO_MAXI_CLK>;
1160                         clock-names = "core", "iface", "bus", "mbus";
1161                         iommus = <&venus_smmu 0x00>,
1162                                  <&venus_smmu 0x01>,
1163                                  <&venus_smmu 0x0a>,
1164                                  <&venus_smmu 0x07>,
1165                                  <&venus_smmu 0x0e>,
1166                                  <&venus_smmu 0x0f>,
1167                                  <&venus_smmu 0x08>,
1168                                  <&venus_smmu 0x09>,
1169                                  <&venus_smmu 0x0b>,
1170                                  <&venus_smmu 0x0c>,
1171                                  <&venus_smmu 0x0d>,
1172                                  <&venus_smmu 0x10>,
1173                                  <&venus_smmu 0x11>,
1174                                  <&venus_smmu 0x21>,
1175                                  <&venus_smmu 0x28>,
1176                                  <&venus_smmu 0x29>,
1177                                  <&venus_smmu 0x2b>,
1178                                  <&venus_smmu 0x2c>,
1179                                  <&venus_smmu 0x2d>,
1180                                  <&venus_smmu 0x31>;
1181                         memory-region = <&venus_region>;
1182                         status = "okay";
1183
1184                         video-decoder {
1185                                 compatible = "venus-decoder";
1186                                 clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
1187                                 clock-names = "core";
1188                                 power-domains = <&mmcc VENUS_CORE0_GDSC>;
1189                         };
1190
1191                         video-encoder {
1192                                 compatible = "venus-encoder";
1193                                 clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
1194                                 clock-names = "core";
1195                                 power-domains = <&mmcc VENUS_CORE1_GDSC>;
1196                         };
1197                 };
1198
1199                 mdp_smmu: iommu@d00000 {
1200                         compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
1201                         reg = <0x00d00000 0x10000>;
1202
1203                         #global-interrupts = <1>;
1204                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1205                                      <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
1206                                      <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
1207                         #iommu-cells = <1>;
1208                         clocks = <&mmcc SMMU_MDP_AHB_CLK>,
1209                                  <&mmcc SMMU_MDP_AXI_CLK>;
1210                         clock-names = "iface", "bus";
1211
1212                         power-domains = <&mmcc MDSS_GDSC>;
1213                 };
1214
1215                 venus_smmu: iommu@d40000 {
1216                         compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
1217                         reg = <0x00d40000 0x20000>;
1218                         #global-interrupts = <1>;
1219                         interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
1220                                      <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1221                                      <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1222                                      <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
1223                                      <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
1224                                      <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
1225                                      <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
1226                                      <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
1227                         power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
1228                         clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
1229                                  <&mmcc SMMU_VIDEO_AXI_CLK>;
1230                         clock-names = "iface", "bus";
1231                         #iommu-cells = <1>;
1232                         status = "okay";
1233                 };
1234
1235                 vfe_smmu: iommu@da0000 {
1236                         compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
1237                         reg = <0x00da0000 0x10000>;
1238
1239                         #global-interrupts = <1>;
1240                         interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
1241                                      <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
1242                                      <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1243                         power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
1244                         clocks = <&mmcc SMMU_VFE_AHB_CLK>,
1245                                  <&mmcc SMMU_VFE_AXI_CLK>;
1246                         clock-names = "iface",
1247                                       "bus";
1248                         #iommu-cells = <1>;
1249                 };
1250
1251                 lpass_q6_smmu: iommu@1600000 {
1252                         compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
1253                         reg = <0x01600000 0x20000>;
1254                         #iommu-cells = <1>;
1255                         power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
1256
1257                         #global-interrupts = <1>;
1258                         interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
1259                                 <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
1260                                 <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
1261                                 <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
1262                                 <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
1263                                 <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
1264                                 <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
1265                                 <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
1266                                 <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
1267                                 <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
1268                                 <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
1269                                 <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
1270                                 <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
1271
1272                         clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
1273                                  <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
1274                         clock-names = "iface", "bus";
1275                 };
1276
1277                 stm@3002000 {
1278                         compatible = "arm,coresight-stm", "arm,primecell";
1279                         reg = <0x3002000 0x1000>,
1280                               <0x8280000 0x180000>;
1281                         reg-names = "stm-base", "stm-stimulus-base";
1282
1283                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1284                         clock-names = "apb_pclk", "atclk";
1285
1286                         out-ports {
1287                                 port {
1288                                         stm_out: endpoint {
1289                                                 remote-endpoint =
1290                                                   <&funnel0_in>;
1291                                         };
1292                                 };
1293                         };
1294                 };
1295
1296                 tpiu@3020000 {
1297                         compatible = "arm,coresight-tpiu", "arm,primecell";
1298                         reg = <0x3020000 0x1000>;
1299
1300                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1301                         clock-names = "apb_pclk", "atclk";
1302
1303                         in-ports {
1304                                 port {
1305                                         tpiu_in: endpoint {
1306                                                 remote-endpoint =
1307                                                   <&replicator_out1>;
1308                                         };
1309                                 };
1310                         };
1311                 };
1312
1313                 funnel@3021000 {
1314                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1315                         reg = <0x3021000 0x1000>;
1316
1317                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1318                         clock-names = "apb_pclk", "atclk";
1319
1320                         in-ports {
1321                                 #address-cells = <1>;
1322                                 #size-cells = <0>;
1323
1324                                 port@7 {
1325                                         reg = <7>;
1326                                         funnel0_in: endpoint {
1327                                                 remote-endpoint =
1328                                                   <&stm_out>;
1329                                         };
1330                                 };
1331                         };
1332
1333                         out-ports {
1334                                 port {
1335                                         funnel0_out: endpoint {
1336                                                 remote-endpoint =
1337                                                   <&merge_funnel_in0>;
1338                                         };
1339                                 };
1340                         };
1341                 };
1342
1343                 funnel@3022000 {
1344                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1345                         reg = <0x3022000 0x1000>;
1346
1347                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1348                         clock-names = "apb_pclk", "atclk";
1349
1350                         in-ports {
1351                                 #address-cells = <1>;
1352                                 #size-cells = <0>;
1353
1354                                 port@6 {
1355                                         reg = <6>;
1356                                         funnel1_in: endpoint {
1357                                                 remote-endpoint =
1358                                                   <&apss_merge_funnel_out>;
1359                                         };
1360                                 };
1361                         };
1362
1363                         out-ports {
1364                                 port {
1365                                         funnel1_out: endpoint {
1366                                                 remote-endpoint =
1367                                                   <&merge_funnel_in1>;
1368                                         };
1369                                 };
1370                         };
1371                 };
1372
1373                 funnel@3023000 {
1374                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1375                         reg = <0x3023000 0x1000>;
1376
1377                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1378                         clock-names = "apb_pclk", "atclk";
1379
1380
1381                         out-ports {
1382                                 port {
1383                                         funnel2_out: endpoint {
1384                                                 remote-endpoint =
1385                                                   <&merge_funnel_in2>;
1386                                         };
1387                                 };
1388                         };
1389                 };
1390
1391                 funnel@3025000 {
1392                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1393                         reg = <0x3025000 0x1000>;
1394
1395                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1396                         clock-names = "apb_pclk", "atclk";
1397
1398                         in-ports {
1399                                 #address-cells = <1>;
1400                                 #size-cells = <0>;
1401
1402                                 port@0 {
1403                                         reg = <0>;
1404                                         merge_funnel_in0: endpoint {
1405                                                 remote-endpoint =
1406                                                   <&funnel0_out>;
1407                                         };
1408                                 };
1409
1410                                 port@1 {
1411                                         reg = <1>;
1412                                         merge_funnel_in1: endpoint {
1413                                                 remote-endpoint =
1414                                                   <&funnel1_out>;
1415                                         };
1416                                 };
1417
1418                                 port@2 {
1419                                         reg = <2>;
1420                                         merge_funnel_in2: endpoint {
1421                                                 remote-endpoint =
1422                                                   <&funnel2_out>;
1423                                         };
1424                                 };
1425                         };
1426
1427                         out-ports {
1428                                 port {
1429                                         merge_funnel_out: endpoint {
1430                                                 remote-endpoint =
1431                                                   <&etf_in>;
1432                                         };
1433                                 };
1434                         };
1435                 };
1436
1437                 replicator@3026000 {
1438                         compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
1439                         reg = <0x3026000 0x1000>;
1440
1441                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1442                         clock-names = "apb_pclk", "atclk";
1443
1444                         in-ports {
1445                                 port {
1446                                         replicator_in: endpoint {
1447                                                 remote-endpoint =
1448                                                   <&etf_out>;
1449                                         };
1450                                 };
1451                         };
1452
1453                         out-ports {
1454                                 #address-cells = <1>;
1455                                 #size-cells = <0>;
1456
1457                                 port@0 {
1458                                         reg = <0>;
1459                                         replicator_out0: endpoint {
1460                                                 remote-endpoint =
1461                                                   <&etr_in>;
1462                                         };
1463                                 };
1464
1465                                 port@1 {
1466                                         reg = <1>;
1467                                         replicator_out1: endpoint {
1468                                                 remote-endpoint =
1469                                                   <&tpiu_in>;
1470                                         };
1471                                 };
1472                         };
1473                 };
1474
1475                 etf@3027000 {
1476                         compatible = "arm,coresight-tmc", "arm,primecell";
1477                         reg = <0x3027000 0x1000>;
1478
1479                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1480                         clock-names = "apb_pclk", "atclk";
1481
1482                         in-ports {
1483                                 port {
1484                                         etf_in: endpoint {
1485                                                 remote-endpoint =
1486                                                   <&merge_funnel_out>;
1487                                         };
1488                                 };
1489                         };
1490
1491                         out-ports {
1492                                 port {
1493                                         etf_out: endpoint {
1494                                                 remote-endpoint =
1495                                                   <&replicator_in>;
1496                                         };
1497                                 };
1498                         };
1499                 };
1500
1501                 etr@3028000 {
1502                         compatible = "arm,coresight-tmc", "arm,primecell";
1503                         reg = <0x3028000 0x1000>;
1504
1505                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1506                         clock-names = "apb_pclk", "atclk";
1507                         arm,scatter-gather;
1508
1509                         in-ports {
1510                                 port {
1511                                         etr_in: endpoint {
1512                                                 remote-endpoint =
1513                                                   <&replicator_out0>;
1514                                         };
1515                                 };
1516                         };
1517                 };
1518
1519                 debug@3810000 {
1520                         compatible = "arm,coresight-cpu-debug", "arm,primecell";
1521                         reg = <0x3810000 0x1000>;
1522
1523                         clocks = <&rpmcc RPM_QDSS_CLK>;
1524                         clock-names = "apb_pclk";
1525
1526                         cpu = <&CPU0>;
1527                 };
1528
1529                 etm@3840000 {
1530                         compatible = "arm,coresight-etm4x", "arm,primecell";
1531                         reg = <0x3840000 0x1000>;
1532
1533                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1534                         clock-names = "apb_pclk", "atclk";
1535
1536                         cpu = <&CPU0>;
1537
1538                         out-ports {
1539                                 port {
1540                                         etm0_out: endpoint {
1541                                                 remote-endpoint =
1542                                                   <&apss_funnel0_in0>;
1543                                         };
1544                                 };
1545                         };
1546                 };
1547
1548                 debug@3910000 {
1549                         compatible = "arm,coresight-cpu-debug", "arm,primecell";
1550                         reg = <0x3910000 0x1000>;
1551
1552                         clocks = <&rpmcc RPM_QDSS_CLK>;
1553                         clock-names = "apb_pclk";
1554
1555                         cpu = <&CPU1>;
1556                 };
1557
1558                 etm@3940000 {
1559                         compatible = "arm,coresight-etm4x", "arm,primecell";
1560                         reg = <0x3940000 0x1000>;
1561
1562                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1563                         clock-names = "apb_pclk", "atclk";
1564
1565                         cpu = <&CPU1>;
1566
1567                         out-ports {
1568                                 port {
1569                                         etm1_out: endpoint {
1570                                                 remote-endpoint =
1571                                                   <&apss_funnel0_in1>;
1572                                         };
1573                                 };
1574                         };
1575                 };
1576
1577                 funnel@39b0000 { /* APSS Funnel 0 */
1578                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1579                         reg = <0x39b0000 0x1000>;
1580
1581                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1582                         clock-names = "apb_pclk", "atclk";
1583
1584                         in-ports {
1585                                 #address-cells = <1>;
1586                                 #size-cells = <0>;
1587
1588                                 port@0 {
1589                                         reg = <0>;
1590                                         apss_funnel0_in0: endpoint {
1591                                                 remote-endpoint = <&etm0_out>;
1592                                         };
1593                                 };
1594
1595                                 port@1 {
1596                                         reg = <1>;
1597                                         apss_funnel0_in1: endpoint {
1598                                                 remote-endpoint = <&etm1_out>;
1599                                         };
1600                                 };
1601                         };
1602
1603                         out-ports {
1604                                 port {
1605                                         apss_funnel0_out: endpoint {
1606                                                 remote-endpoint =
1607                                                   <&apss_merge_funnel_in0>;
1608                                         };
1609                                 };
1610                         };
1611                 };
1612
1613                 debug@3a10000 {
1614                         compatible = "arm,coresight-cpu-debug", "arm,primecell";
1615                         reg = <0x3a10000 0x1000>;
1616
1617                         clocks = <&rpmcc RPM_QDSS_CLK>;
1618                         clock-names = "apb_pclk";
1619
1620                         cpu = <&CPU2>;
1621                 };
1622
1623                 etm@3a40000 {
1624                         compatible = "arm,coresight-etm4x", "arm,primecell";
1625                         reg = <0x3a40000 0x1000>;
1626
1627                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1628                         clock-names = "apb_pclk", "atclk";
1629
1630                         cpu = <&CPU2>;
1631
1632                         out-ports {
1633                                 port {
1634                                         etm2_out: endpoint {
1635                                                 remote-endpoint =
1636                                                   <&apss_funnel1_in0>;
1637                                         };
1638                                 };
1639                         };
1640                 };
1641
1642                 debug@3b10000 {
1643                         compatible = "arm,coresight-cpu-debug", "arm,primecell";
1644                         reg = <0x3b10000 0x1000>;
1645
1646                         clocks = <&rpmcc RPM_QDSS_CLK>;
1647                         clock-names = "apb_pclk";
1648
1649                         cpu = <&CPU3>;
1650                 };
1651
1652                 etm@3b40000 {
1653                         compatible = "arm,coresight-etm4x", "arm,primecell";
1654                         reg = <0x3b40000 0x1000>;
1655
1656                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1657                         clock-names = "apb_pclk", "atclk";
1658
1659                         cpu = <&CPU3>;
1660
1661                         out-ports {
1662                                 port {
1663                                         etm3_out: endpoint {
1664                                                 remote-endpoint =
1665                                                   <&apss_funnel1_in1>;
1666                                         };
1667                                 };
1668                         };
1669                 };
1670
1671                 funnel@3bb0000 { /* APSS Funnel 1 */
1672                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1673                         reg = <0x3bb0000 0x1000>;
1674
1675                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1676                         clock-names = "apb_pclk", "atclk";
1677
1678                         in-ports {
1679                                 #address-cells = <1>;
1680                                 #size-cells = <0>;
1681
1682                                 port@0 {
1683                                         reg = <0>;
1684                                         apss_funnel1_in0: endpoint {
1685                                                 remote-endpoint = <&etm2_out>;
1686                                         };
1687                                 };
1688
1689                                 port@1 {
1690                                         reg = <1>;
1691                                         apss_funnel1_in1: endpoint {
1692                                                 remote-endpoint = <&etm3_out>;
1693                                         };
1694                                 };
1695                         };
1696
1697                         out-ports {
1698                                 port {
1699                                         apss_funnel1_out: endpoint {
1700                                                 remote-endpoint =
1701                                                   <&apss_merge_funnel_in1>;
1702                                         };
1703                                 };
1704                         };
1705                 };
1706
1707                 funnel@3bc0000 {
1708                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1709                         reg = <0x3bc0000 0x1000>;
1710
1711                         clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1712                         clock-names = "apb_pclk", "atclk";
1713
1714                         in-ports {
1715                                 #address-cells = <1>;
1716                                 #size-cells = <0>;
1717
1718                                 port@0 {
1719                                         reg = <0>;
1720                                         apss_merge_funnel_in0: endpoint {
1721                                                 remote-endpoint =
1722                                                   <&apss_funnel0_out>;
1723                                         };
1724                                 };
1725
1726                                 port@1 {
1727                                         reg = <1>;
1728                                         apss_merge_funnel_in1: endpoint {
1729                                                 remote-endpoint =
1730                                                   <&apss_funnel1_out>;
1731                                         };
1732                                 };
1733                         };
1734
1735                         out-ports {
1736                                 port {
1737                                         apss_merge_funnel_out: endpoint {
1738                                                 remote-endpoint =
1739                                                   <&funnel1_in>;
1740                                         };
1741                                 };
1742                         };
1743                 };
1744                 kryocc: clock-controller@6400000 {
1745                         compatible = "qcom,apcc-msm8996";
1746                         reg = <0x06400000 0x90000>;
1747                         #clock-cells = <1>;
1748                 };
1749
1750                 usb3: usb@6af8800 {
1751                         compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
1752                         reg = <0x06af8800 0x400>;
1753                         #address-cells = <1>;
1754                         #size-cells = <1>;
1755                         ranges;
1756
1757                         clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
1758                                 <&gcc GCC_USB30_MASTER_CLK>,
1759                                 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
1760                                 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
1761                                 <&gcc GCC_USB30_SLEEP_CLK>,
1762                                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
1763
1764                         assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
1765                                           <&gcc GCC_USB30_MASTER_CLK>;
1766                         assigned-clock-rates = <19200000>, <120000000>;
1767
1768                         power-domains = <&gcc USB30_GDSC>;
1769                         status = "disabled";
1770
1771                         dwc3@6a00000 {
1772                                 compatible = "snps,dwc3";
1773                                 reg = <0x06a00000 0xcc00>;
1774                                 interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
1775                                 phys = <&hsusb_phy1>, <&ssusb_phy_0>;
1776                                 phy-names = "usb2-phy", "usb3-phy";
1777                                 snps,dis_u2_susphy_quirk;
1778                                 snps,dis_enblslpm_quirk;
1779                         };
1780                 };
1781
1782                 usb3phy: phy@7410000 {
1783                         compatible = "qcom,msm8996-qmp-usb3-phy";
1784                         reg = <0x07410000 0x1c4>;
1785                         #clock-cells = <1>;
1786                         #address-cells = <1>;
1787                         #size-cells = <1>;
1788                         ranges;
1789
1790                         clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
1791                                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
1792                                 <&gcc GCC_USB3_CLKREF_CLK>;
1793                         clock-names = "aux", "cfg_ahb", "ref";
1794
1795                         resets = <&gcc GCC_USB3_PHY_BCR>,
1796                                 <&gcc GCC_USB3PHY_PHY_BCR>;
1797                         reset-names = "phy", "common";
1798                         status = "disabled";
1799
1800                         ssusb_phy_0: lane@7410200 {
1801                                 reg = <0x07410200 0x200>,
1802                                       <0x07410400 0x130>,
1803                                       <0x07410600 0x1a8>;
1804                                 #phy-cells = <0>;
1805
1806                                 clock-output-names = "usb3_phy_pipe_clk_src";
1807                                 clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
1808                                 clock-names = "pipe0";
1809                         };
1810                 };
1811
1812                 hsusb_phy1: phy@7411000 {
1813                         compatible = "qcom,msm8996-qusb2-phy";
1814                         reg = <0x07411000 0x180>;
1815                         #phy-cells = <0>;
1816
1817                         clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
1818                                 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
1819                         clock-names = "cfg_ahb", "ref";
1820
1821                         resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
1822                         nvmem-cells = <&qusb2p_hstx_trim>;
1823                         status = "disabled";
1824                 };
1825
1826                 hsusb_phy2: phy@7412000 {
1827                         compatible = "qcom,msm8996-qusb2-phy";
1828                         reg = <0x07412000 0x180>;
1829                         #phy-cells = <0>;
1830
1831                         clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
1832                                 <&gcc GCC_RX2_USB2_CLKREF_CLK>;
1833                         clock-names = "cfg_ahb", "ref";
1834
1835                         resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
1836                         nvmem-cells = <&qusb2s_hstx_trim>;
1837                         status = "disabled";
1838                 };
1839
1840                 sdhc2: sdhci@74a4900 {
1841                          status = "disabled";
1842                          compatible = "qcom,sdhci-msm-v4";
1843                          reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
1844                          reg-names = "hc_mem", "core_mem";
1845
1846                          interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
1847                                       <0 221 IRQ_TYPE_LEVEL_HIGH>;
1848                          interrupt-names = "hc_irq", "pwr_irq";
1849
1850                          clock-names = "iface", "core", "xo";
1851                          clocks = <&gcc GCC_SDCC2_AHB_CLK>,
1852                          <&gcc GCC_SDCC2_APPS_CLK>,
1853                          <&xo_board>;
1854                          bus-width = <4>;
1855                  };
1856
1857                 blsp1_uart1: serial@7570000 {
1858                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
1859                         reg = <0x07570000 0x1000>;
1860                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
1861                         clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
1862                                  <&gcc GCC_BLSP1_AHB_CLK>;
1863                         clock-names = "core", "iface";
1864                         status = "disabled";
1865                 };
1866
1867                 blsp1_spi0: spi@7575000 {
1868                         compatible = "qcom,spi-qup-v2.2.1";
1869                         reg = <0x07575000 0x600>;
1870                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
1871                         clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
1872                                  <&gcc GCC_BLSP1_AHB_CLK>;
1873                         clock-names = "core", "iface";
1874                         pinctrl-names = "default", "sleep";
1875                         pinctrl-0 = <&blsp1_spi0_default>;
1876                         pinctrl-1 = <&blsp1_spi0_sleep>;
1877                         #address-cells = <1>;
1878                         #size-cells = <0>;
1879                         status = "disabled";
1880                 };
1881
1882                 blsp1_i2c2: i2c@7577000 {
1883                         compatible = "qcom,i2c-qup-v2.2.1";
1884                         reg = <0x07577000 0x1000>;
1885                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
1886                         clocks = <&gcc GCC_BLSP1_AHB_CLK>,
1887                                 <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
1888                         clock-names = "iface", "core";
1889                         pinctrl-names = "default", "sleep";
1890                         pinctrl-0 = <&blsp1_i2c2_default>;
1891                         pinctrl-1 = <&blsp1_i2c2_sleep>;
1892                         #address-cells = <1>;
1893                         #size-cells = <0>;
1894                         status = "disabled";
1895                 };
1896
1897                 blsp2_uart1: serial@75b0000 {
1898                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
1899                         reg = <0x075b0000 0x1000>;
1900                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
1901                         clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
1902                                  <&gcc GCC_BLSP2_AHB_CLK>;
1903                         clock-names = "core", "iface";
1904                         status = "disabled";
1905                 };
1906
1907                 blsp2_uart2: serial@75b1000 {
1908                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
1909                         reg = <0x075b1000 0x1000>;
1910                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
1911                         clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
1912                                  <&gcc GCC_BLSP2_AHB_CLK>;
1913                         clock-names = "core", "iface";
1914                         status = "disabled";
1915                 };
1916
1917                 blsp2_i2c0: i2c@75b5000 {
1918                         compatible = "qcom,i2c-qup-v2.2.1";
1919                         reg = <0x075b5000 0x1000>;
1920                         interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1921                         clocks = <&gcc GCC_BLSP2_AHB_CLK>,
1922                                 <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
1923                         clock-names = "iface", "core";
1924                         pinctrl-names = "default", "sleep";
1925                         pinctrl-0 = <&blsp2_i2c0_default>;
1926                         pinctrl-1 = <&blsp2_i2c0_sleep>;
1927                         #address-cells = <1>;
1928                         #size-cells = <0>;
1929                         status = "disabled";
1930                 };
1931
1932                 blsp2_i2c1: i2c@75b6000 {
1933                         compatible = "qcom,i2c-qup-v2.2.1";
1934                         reg = <0x075b6000 0x1000>;
1935                         interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
1936                         clocks = <&gcc GCC_BLSP2_AHB_CLK>,
1937                                 <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
1938                         clock-names = "iface", "core";
1939                         pinctrl-names = "default", "sleep";
1940                         pinctrl-0 = <&blsp2_i2c1_default>;
1941                         pinctrl-1 = <&blsp2_i2c1_sleep>;
1942                         #address-cells = <1>;
1943                         #size-cells = <0>;
1944                         status = "disabled";
1945                 };
1946
1947                 blsp2_spi5: spi@75ba000{
1948                         compatible = "qcom,spi-qup-v2.2.1";
1949                         reg = <0x075ba000 0x600>;
1950                         interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
1951                         clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
1952                                  <&gcc GCC_BLSP2_AHB_CLK>;
1953                         clock-names = "core", "iface";
1954                         pinctrl-names = "default", "sleep";
1955                         pinctrl-0 = <&blsp2_spi5_default>;
1956                         pinctrl-1 = <&blsp2_spi5_sleep>;
1957                         #address-cells = <1>;
1958                         #size-cells = <0>;
1959                         status = "disabled";
1960                 };
1961
1962                 usb2: usb@76f8800 {
1963                         compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
1964                         reg = <0x076f8800 0x400>;
1965                         #address-cells = <1>;
1966                         #size-cells = <1>;
1967                         ranges;
1968
1969                         clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
1970                                 <&gcc GCC_USB20_MASTER_CLK>,
1971                                 <&gcc GCC_USB20_MOCK_UTMI_CLK>,
1972                                 <&gcc GCC_USB20_SLEEP_CLK>,
1973                                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
1974
1975                         assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
1976                                           <&gcc GCC_USB20_MASTER_CLK>;
1977                         assigned-clock-rates = <19200000>, <60000000>;
1978
1979                         power-domains = <&gcc USB30_GDSC>;
1980                         status = "disabled";
1981
1982                         dwc3@7600000 {
1983                                 compatible = "snps,dwc3";
1984                                 reg = <0x07600000 0xcc00>;
1985                                 interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
1986                                 phys = <&hsusb_phy2>;
1987                                 phy-names = "usb2-phy";
1988                                 snps,dis_u2_susphy_quirk;
1989                                 snps,dis_enblslpm_quirk;
1990                         };
1991                 };
1992
1993                 slimbam: dma@9184000 {
1994                         compatible = "qcom,bam-v1.7.0";
1995                         qcom,controlled-remotely;
1996                         reg = <0x09184000 0x32000>;
1997                         num-channels  = <31>;
1998                         interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
1999                         #dma-cells = <1>;
2000                         qcom,ee = <1>;
2001                         qcom,num-ees = <2>;
2002                 };
2003
2004                 slim_msm: slim@91c0000 {
2005                         compatible = "qcom,slim-ngd-v1.5.0";
2006                         reg = <0x091c0000 0x2C000>;
2007                         reg-names = "ctrl";
2008                         interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
2009                         dmas =  <&slimbam 3>, <&slimbam 4>,
2010                                 <&slimbam 5>, <&slimbam 6>;
2011                         dma-names = "rx", "tx", "tx2", "rx2";
2012                         #address-cells = <1>;
2013                         #size-cells = <0>;
2014                         ngd@1 {
2015                                 reg = <1>;
2016                                 #address-cells = <1>;
2017                                 #size-cells = <1>;
2018
2019                                 tasha_ifd: tas-ifd {
2020                                         compatible = "slim217,1a0";
2021                                         reg  = <0 0>;
2022                                 };
2023
2024                                 wcd9335: codec@1{
2025                                         pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
2026                                         pinctrl-names = "default";
2027
2028                                         compatible = "slim217,1a0";
2029                                         reg  = <1 0>;
2030
2031                                         interrupt-parent = <&msmgpio>;
2032                                         interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
2033                                                      <53 IRQ_TYPE_LEVEL_HIGH>;
2034                                         interrupt-names  = "intr1", "intr2";
2035                                         interrupt-controller;
2036                                         #interrupt-cells = <1>;
2037                                         reset-gpios = <&msmgpio 64 0>;
2038
2039                                         slim-ifc-dev  = <&tasha_ifd>;
2040
2041                                         #sound-dai-cells = <1>;
2042                                 };
2043                         };
2044                 };
2045
2046                 adsp_pil: remoteproc@9300000 {
2047                         compatible = "qcom,msm8996-adsp-pil";
2048                         reg = <0x09300000 0x80000>;
2049
2050                         interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
2051                                               <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
2052                                               <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
2053                                               <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
2054                                               <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
2055                         interrupt-names = "wdog", "fatal", "ready",
2056                                           "handover", "stop-ack";
2057
2058                         clocks = <&xo_board>;
2059                         clock-names = "xo";
2060
2061                         memory-region = <&adsp_region>;
2062
2063                         qcom,smem-states = <&smp2p_adsp_out 0>;
2064                         qcom,smem-state-names = "stop";
2065
2066                         smd-edge {
2067                                 interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
2068
2069                                 label = "lpass";
2070                                 mboxes = <&apcs_glb 8>;
2071                                 qcom,smd-edge = <1>;
2072                                 qcom,remote-pid = <2>;
2073                                 #address-cells = <1>;
2074                                 #size-cells = <0>;
2075                                 apr {
2076                                         power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
2077                                         compatible = "qcom,apr-v2";
2078                                         qcom,smd-channels = "apr_audio_svc";
2079                                         qcom,apr-domain = <APR_DOMAIN_ADSP>;
2080                                         #address-cells = <1>;
2081                                         #size-cells = <0>;
2082
2083                                         q6core {
2084                                                 reg = <APR_SVC_ADSP_CORE>;
2085                                                 compatible = "qcom,q6core";
2086                                         };
2087
2088                                         q6afe: q6afe {
2089                                                 compatible = "qcom,q6afe";
2090                                                 reg = <APR_SVC_AFE>;
2091                                                 q6afedai: dais {
2092                                                         compatible = "qcom,q6afe-dais";
2093                                                         #address-cells = <1>;
2094                                                         #size-cells = <0>;
2095                                                         #sound-dai-cells = <1>;
2096                                                         hdmi@1 {
2097                                                                 reg = <1>;
2098                                                         };
2099                                                 };
2100                                         };
2101
2102                                         q6asm: q6asm {
2103                                                 compatible = "qcom,q6asm";
2104                                                 reg = <APR_SVC_ASM>;
2105                                                 q6asmdai: dais {
2106                                                         compatible = "qcom,q6asm-dais";
2107                                                         #address-cells = <1>;
2108                                                         #size-cells = <0>;
2109                                                         #sound-dai-cells = <1>;
2110                                                         iommus = <&lpass_q6_smmu 1>;
2111                                                 };
2112                                         };
2113
2114                                         q6adm: q6adm {
2115                                                 compatible = "qcom,q6adm";
2116                                                 reg = <APR_SVC_ADM>;
2117                                                 q6routing: routing {
2118                                                         compatible = "qcom,q6adm-routing";
2119                                                         #sound-dai-cells = <0>;
2120                                                 };
2121                                         };
2122                                 };
2123
2124                         };
2125                 };
2126
2127                 apcs_glb: mailbox@9820000 {
2128                         compatible = "qcom,msm8996-apcs-hmss-global";
2129                         reg = <0x09820000 0x1000>;
2130
2131                         #mbox-cells = <1>;
2132                 };
2133
2134                 timer@9840000 {
2135                         #address-cells = <1>;
2136                         #size-cells = <1>;
2137                         ranges;
2138                         compatible = "arm,armv7-timer-mem";
2139                         reg = <0x09840000 0x1000>;
2140                         clock-frequency = <19200000>;
2141
2142                         frame@9850000 {
2143                                 frame-number = <0>;
2144                                 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
2145                                              <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
2146                                 reg = <0x09850000 0x1000>,
2147                                       <0x09860000 0x1000>;
2148                         };
2149
2150                         frame@9870000 {
2151                                 frame-number = <1>;
2152                                 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
2153                                 reg = <0x09870000 0x1000>;
2154                                 status = "disabled";
2155                         };
2156
2157                         frame@9880000 {
2158                                 frame-number = <2>;
2159                                 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
2160                                 reg = <0x09880000 0x1000>;
2161                                 status = "disabled";
2162                         };
2163
2164                         frame@9890000 {
2165                                 frame-number = <3>;
2166                                 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
2167                                 reg = <0x09890000 0x1000>;
2168                                 status = "disabled";
2169                         };
2170
2171                         frame@98a0000 {
2172                                 frame-number = <4>;
2173                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
2174                                 reg = <0x098a0000 0x1000>;
2175                                 status = "disabled";
2176                         };
2177
2178                         frame@98b0000 {
2179                                 frame-number = <5>;
2180                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
2181                                 reg = <0x098b0000 0x1000>;
2182                                 status = "disabled";
2183                         };
2184
2185                         frame@98c0000 {
2186                                 frame-number = <6>;
2187                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
2188                                 reg = <0x098c0000 0x1000>;
2189                                 status = "disabled";
2190                         };
2191                 };
2192
2193                 saw3: syscon@9a10000 {
2194                         compatible = "syscon";
2195                         reg = <0x09a10000 0x1000>;
2196                 };
2197
2198                 intc: interrupt-controller@9bc0000 {
2199                         compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
2200                         #interrupt-cells = <3>;
2201                         interrupt-controller;
2202                         #redistributor-regions = <1>;
2203                         redistributor-stride = <0x0 0x40000>;
2204                         reg = <0x09bc0000 0x10000>,
2205                               <0x09c00000 0x100000>;
2206                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
2207                 };
2208         };
2209
2210         sound: sound {
2211         };
2212
2213         thermal-zones {
2214                 cpu0-thermal {
2215                         polling-delay-passive = <250>;
2216                         polling-delay = <1000>;
2217
2218                         thermal-sensors = <&tsens0 3>;
2219
2220                         trips {
2221                                 cpu0_alert0: trip-point0 {
2222                                         temperature = <75000>;
2223                                         hysteresis = <2000>;
2224                                         type = "passive";
2225                                 };
2226
2227                                 cpu0_crit: cpu_crit {
2228                                         temperature = <110000>;
2229                                         hysteresis = <2000>;
2230                                         type = "critical";
2231                                 };
2232                         };
2233                 };
2234
2235                 cpu1-thermal {
2236                         polling-delay-passive = <250>;
2237                         polling-delay = <1000>;
2238
2239                         thermal-sensors = <&tsens0 5>;
2240
2241                         trips {
2242                                 cpu1_alert0: trip-point0 {
2243                                         temperature = <75000>;
2244                                         hysteresis = <2000>;
2245                                         type = "passive";
2246                                 };
2247
2248                                 cpu1_crit: cpu_crit {
2249                                         temperature = <110000>;
2250                                         hysteresis = <2000>;
2251                                         type = "critical";
2252                                 };
2253                         };
2254                 };
2255
2256                 cpu2-thermal {
2257                         polling-delay-passive = <250>;
2258                         polling-delay = <1000>;
2259
2260                         thermal-sensors = <&tsens0 8>;
2261
2262                         trips {
2263                                 cpu2_alert0: trip-point0 {
2264                                         temperature = <75000>;
2265                                         hysteresis = <2000>;
2266                                         type = "passive";
2267                                 };
2268
2269                                 cpu2_crit: cpu_crit {
2270                                         temperature = <110000>;
2271                                         hysteresis = <2000>;
2272                                         type = "critical";
2273                                 };
2274                         };
2275                 };
2276
2277                 cpu3-thermal {
2278                         polling-delay-passive = <250>;
2279                         polling-delay = <1000>;
2280
2281                         thermal-sensors = <&tsens0 10>;
2282
2283                         trips {
2284                                 cpu3_alert0: trip-point0 {
2285                                         temperature = <75000>;
2286                                         hysteresis = <2000>;
2287                                         type = "passive";
2288                                 };
2289
2290                                 cpu3_crit: cpu_crit {
2291                                         temperature = <110000>;
2292                                         hysteresis = <2000>;
2293                                         type = "critical";
2294                                 };
2295                         };
2296                 };
2297
2298                 gpu-thermal-top {
2299                         polling-delay-passive = <250>;
2300                         polling-delay = <1000>;
2301
2302                         thermal-sensors = <&tsens1 6>;
2303
2304                         trips {
2305                                 gpu1_alert0: trip-point0 {
2306                                         temperature = <90000>;
2307                                         hysteresis = <2000>;
2308                                         type = "hot";
2309                                 };
2310                         };
2311                 };
2312
2313                 gpu-thermal-bottom {
2314                         polling-delay-passive = <250>;
2315                         polling-delay = <1000>;
2316
2317                         thermal-sensors = <&tsens1 7>;
2318
2319                         trips {
2320                                 gpu2_alert0: trip-point0 {
2321                                         temperature = <90000>;
2322                                         hysteresis = <2000>;
2323                                         type = "hot";
2324                                 };
2325                         };
2326                 };
2327
2328                 m4m-thermal {
2329                         polling-delay-passive = <250>;
2330                         polling-delay = <1000>;
2331
2332                         thermal-sensors = <&tsens0 1>;
2333
2334                         trips {
2335                                 m4m_alert0: trip-point0 {
2336                                         temperature = <90000>;
2337                                         hysteresis = <2000>;
2338                                         type = "hot";
2339                                 };
2340                         };
2341                 };
2342
2343                 l3-or-venus-thermal {
2344                         polling-delay-passive = <250>;
2345                         polling-delay = <1000>;
2346
2347                         thermal-sensors = <&tsens0 2>;
2348
2349                         trips {
2350                                 l3_or_venus_alert0: trip-point0 {
2351                                         temperature = <90000>;
2352                                         hysteresis = <2000>;
2353                                         type = "hot";
2354                                 };
2355                         };
2356                 };
2357
2358                 cluster0-l2-thermal {
2359                         polling-delay-passive = <250>;
2360                         polling-delay = <1000>;
2361
2362                         thermal-sensors = <&tsens0 7>;
2363
2364                         trips {
2365                                 cluster0_l2_alert0: trip-point0 {
2366                                         temperature = <90000>;
2367                                         hysteresis = <2000>;
2368                                         type = "hot";
2369                                 };
2370                         };
2371                 };
2372
2373                 cluster1-l2-thermal {
2374                         polling-delay-passive = <250>;
2375                         polling-delay = <1000>;
2376
2377                         thermal-sensors = <&tsens0 12>;
2378
2379                         trips {
2380                                 cluster1_l2_alert0: trip-point0 {
2381                                         temperature = <90000>;
2382                                         hysteresis = <2000>;
2383                                         type = "hot";
2384                                 };
2385                         };
2386                 };
2387
2388                 camera-thermal {
2389                         polling-delay-passive = <250>;
2390                         polling-delay = <1000>;
2391
2392                         thermal-sensors = <&tsens1 1>;
2393
2394                         trips {
2395                                 camera_alert0: trip-point0 {
2396                                         temperature = <90000>;
2397                                         hysteresis = <2000>;
2398                                         type = "hot";
2399                                 };
2400                         };
2401                 };
2402
2403                 q6-dsp-thermal {
2404                         polling-delay-passive = <250>;
2405                         polling-delay = <1000>;
2406
2407                         thermal-sensors = <&tsens1 2>;
2408
2409                         trips {
2410                                 q6_dsp_alert0: trip-point0 {
2411                                         temperature = <90000>;
2412                                         hysteresis = <2000>;
2413                                         type = "hot";
2414                                 };
2415                         };
2416                 };
2417
2418                 mem-thermal {
2419                         polling-delay-passive = <250>;
2420                         polling-delay = <1000>;
2421
2422                         thermal-sensors = <&tsens1 3>;
2423
2424                         trips {
2425                                 mem_alert0: trip-point0 {
2426                                         temperature = <90000>;
2427                                         hysteresis = <2000>;
2428                                         type = "hot";
2429                                 };
2430                         };
2431                 };
2432
2433                 modemtx-thermal {
2434                         polling-delay-passive = <250>;
2435                         polling-delay = <1000>;
2436
2437                         thermal-sensors = <&tsens1 4>;
2438
2439                         trips {
2440                                 modemtx_alert0: trip-point0 {
2441                                         temperature = <90000>;
2442                                         hysteresis = <2000>;
2443                                         type = "hot";
2444                                 };
2445                         };
2446                 };
2447         };
2448
2449         timer {
2450                 compatible = "arm,armv8-timer";
2451                 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
2452                              <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
2453                              <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
2454                              <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
2455         };
2456 };
2457 #include "msm8996-pins.dtsi"