arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 /dts-v1/;
   4
   5 #include "msm8916-pm8916.dtsi"
   6 #include <dt-bindings/gpio/gpio.h>
   7
   8 / {
   9         model = "Samsung Galaxy J5 (2015)";
  10         compatible = "samsung,j5", "qcom,msm8916";
  11         chassis-type = "handset";
  12
  13         aliases {
  14                 serial0 = &blsp1_uart2;
  15         };
  16
  17         chosen {
  18                 stdout-path = "serial0";
  19         };
  20
  21         reserved-memory {
  22                 /* Additional memory used by Samsung firmware modifications */
  23                 tz-apps@85500000 {
  24                         reg = <0x0 0x85500000 0x0 0xb00000>;
  25                         no-map;
  26                 };
  27         };
  28
  29         gpio-keys {
  30                 compatible = "gpio-keys";
  31
  32                 pinctrl-names = "default";
  33                 pinctrl-0 = <&gpio_keys_default>;
  34
  35                 label = "GPIO Buttons";
  36
  37                 volume-up {
  38                         label = "Volume Up";
  39                         gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
  40                         linux,code = <KEY_VOLUMEUP>;
  41                 };
  42
  43                 home-key {
  44                         lable = "Home Key";
  45                         gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_HOMEPAGE>;
  47                 };
  48         };
  49 };
  50
  51 &blsp1_uart2 {
  52         status = "okay";
  53 };
  54
  55 &pm8916_resin {
  56         status = "okay";
  57         linux,code = <KEY_VOLUMEDOWN>;
  58 };
  59
  60 /* FIXME: Replace with SM5703 MUIC when driver is available */
  61 &pm8916_usbin {
  62         status = "okay";
  63 };
  64
  65 &pronto {
  66         status = "okay";
  67 };
  68
  69 &sdhc_1 {
  70         status = "okay";
  71
  72         pinctrl-names = "default", "sleep";
  73         pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
  74         pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
  75 };
  76
  77 &sdhc_2 {
  78         status = "okay";
  79
  80         pinctrl-names = "default", "sleep";
  81         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
  82         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
  83
  84         cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
  85 };
  86
  87 &usb {
  88         status = "okay";
  89         dr_mode = "peripheral";
  90         extcon = <&pm8916_usbin>;
  91 };
  92
  93 &usb_hs_phy {
  94         extcon = <&pm8916_usbin>;
  95         qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>;
  96 };
  97
  98 &smd_rpm_regulators {
  99         vdd_l1_l2_l3-supply = <&pm8916_s3>;
 100         vdd_l4_l5_l6-supply = <&pm8916_s4>;
 101         vdd_l7-supply = <&pm8916_s4>;
 102
 103         s3 {
 104                 regulator-min-microvolt = <1200000>;
 105                 regulator-max-microvolt = <1300000>;
 106         };
 107
 108         s4 {
 109                 regulator-min-microvolt = <1800000>;
 110                 regulator-max-microvolt = <2100000>;
 111         };
 112
 113         l1 {
 114                 regulator-min-microvolt = <1225000>;
 115                 regulator-max-microvolt = <1225000>;
 116         };
 117
 118         l2 {
 119                 regulator-min-microvolt = <1200000>;
 120                 regulator-max-microvolt = <1200000>;
 121         };
 122
 123         l4 {
 124                 regulator-min-microvolt = <2050000>;
 125                 regulator-max-microvolt = <2050000>;
 126         };
 127
 128         l5 {
 129                 regulator-min-microvolt = <1800000>;
 130                 regulator-max-microvolt = <1800000>;
 131         };
 132
 133         l6 {
 134                 regulator-min-microvolt = <1800000>;
 135                 regulator-max-microvolt = <1800000>;
 136         };
 137
 138         l7 {
 139                 regulator-min-microvolt = <1800000>;
 140                 regulator-max-microvolt = <1800000>;
 141         };
 142
 143         l8 {
 144                 regulator-min-microvolt = <2850000>;
 145                 regulator-max-microvolt = <2900000>;
 146         };
 147
 148         l9 {
 149                 regulator-min-microvolt = <3300000>;
 150                 regulator-max-microvolt = <3300000>;
 151         };
 152
 153         l10 {
 154                 regulator-min-microvolt = <2700000>;
 155                 regulator-max-microvolt = <2800000>;
 156         };
 157
 158         l11 {
 159                 regulator-min-microvolt = <1800000>;
 160                 regulator-max-microvolt = <2950000>;
 161                 regulator-allow-set-load;
 162                 regulator-system-load = <200000>;
 163         };
 164
 165         l12 {
 166                 regulator-min-microvolt = <1800000>;
 167                 regulator-max-microvolt = <2950000>;
 168         };
 169
 170         l13 {
 171                 regulator-min-microvolt = <3075000>;
 172                 regulator-max-microvolt = <3075000>;
 173         };
 174
 175         l14 {
 176                 regulator-min-microvolt = <1800000>;
 177                 regulator-max-microvolt = <3300000>;
 178         };
 179
 180         l15 {
 181                 regulator-min-microvolt = <1800000>;
 182                 regulator-max-microvolt = <3300000>;
 183         };
 184
 185         l16 {
 186                 regulator-min-microvolt = <1800000>;
 187                 regulator-max-microvolt = <3300000>;
 188         };
 189
 190         l17 {
 191                 regulator-min-microvolt = <3000000>;
 192                 regulator-max-microvolt = <3000000>;
 193         };
 194
 195         l18 {
 196                 regulator-min-microvolt = <2700000>;
 197                 regulator-max-microvolt = <2700000>;
 198         };
 199 };
 200
 201 &msmgpio {
 202         gpio_keys_default: gpio-keys-default {
 203                 pins = "gpio107", "gpio109";
 204                 function = "gpio";
 205
 206                 drive-strength = <2>;
 207                 bias-pull-up;
 208         };
 209 };