arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include "msm8916-pm8916.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/interrupt-controller/irq.h>
   7
   8 / {
   9         aliases {
  10                 serial0 = &blsp1_uart2;
  11         };
  12
  13         chosen {
  14                 stdout-path = "serial0";
  15         };
  16
  17         reserved-memory {
  18                 /* Additional memory used by Samsung firmware modifications */
  19                 tz-apps@85500000 {
  20                         reg = <0x0 0x85500000 0x0 0xb00000>;
  21                         no-map;
  22                 };
  23         };
  24
  25         gpio-keys {
  26                 compatible = "gpio-keys";
  27
  28                 pinctrl-names = "default";
  29                 pinctrl-0 = <&gpio_keys_default>;
  30
  31                 label = "GPIO Buttons";
  32
  33                 volume-up {
  34                         label = "Volume Up";
  35                         gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_VOLUMEUP>;
  37                 };
  38
  39                 home {
  40                         label = "Home";
  41                         gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_HOMEPAGE>;
  43                 };
  44         };
  45
  46         gpio-hall-sensor {
  47                 compatible = "gpio-keys";
  48
  49                 pinctrl-names = "default";
  50                 pinctrl-0 = <&gpio_hall_sensor_default>;
  51
  52                 label = "GPIO Hall Effect Sensor";
  53
  54                 hall-sensor {
  55                         label = "Hall Effect Sensor";
  56                         gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
  57                         linux,input-type = <EV_SW>;
  58                         linux,code = <SW_LID>;
  59                         linux,can-disable;
  60                 };
  61         };
  62
  63         reg_vdd_tsp: regulator-vdd-tsp {
  64                 compatible = "regulator-fixed";
  65                 regulator-name = "vdd_tsp";
  66                 regulator-min-microvolt = <3300000>;
  67                 regulator-max-microvolt = <3300000>;
  68
  69                 gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
  70                 enable-active-high;
  71
  72                 pinctrl-names = "default";
  73                 pinctrl-0 = <&tsp_en_default>;
  74         };
  75
  76         i2c-muic {
  77                 compatible = "i2c-gpio";
  78                 sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
  79                 scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
  80
  81                 pinctrl-names = "default";
  82                 pinctrl-0 = <&muic_i2c_default>;
  83
  84                 #address-cells = <1>;
  85                 #size-cells = <0>;
  86
  87                 muic: extcon@25 {
  88                         compatible = "siliconmitus,sm5502-muic";
  89
  90                         reg = <0x25>;
  91                         interrupt-parent = <&msmgpio>;
  92                         interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
  93
  94                         pinctrl-names = "default";
  95                         pinctrl-0 = <&muic_int_default>;
  96                 };
  97         };
  98 };
  99
 100 &blsp_i2c2 {
 101         status = "okay";
 102
 103         accelerometer: accelerometer@10 {
 104                 compatible = "bosch,bmc150_accel";
 105                 reg = <0x10>;
 106                 interrupt-parent = <&msmgpio>;
 107                 interrupts = <115 IRQ_TYPE_EDGE_RISING>;
 108
 109                 pinctrl-names = "default";
 110                 pinctrl-0 = <&accel_int_default>;
 111         };
 112
 113         magnetometer@12 {
 114                 compatible = "bosch,bmc150_magn";
 115                 reg = <0x12>;
 116         };
 117 };
 118
 119 &blsp1_uart2 {
 120         status = "okay";
 121 };
 122
 123 &dsi0 {
 124         pinctrl-names = "default", "sleep";
 125         pinctrl-0 = <&mdss_default>;
 126         pinctrl-1 = <&mdss_sleep>;
 127 };
 128
 129 &pm8916_resin {
 130         status = "okay";
 131         linux,code = <KEY_VOLUMEDOWN>;
 132 };
 133
 134 &pronto {
 135         status = "okay";
 136 };
 137
 138 &sdhc_1 {
 139         status = "okay";
 140
 141         pinctrl-names = "default", "sleep";
 142         pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 143         pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
 144 };
 145
 146 &sdhc_2 {
 147         status = "okay";
 148
 149         pinctrl-names = "default", "sleep";
 150         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 151         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 152
 153         cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
 154 };
 155
 156 &usb {
 157         status = "okay";
 158         extcon = <&muic>, <&muic>;
 159 };
 160
 161 &usb_hs_phy {
 162         extcon = <&muic>;
 163 };
 164
 165 &smd_rpm_regulators {
 166         vdd_l1_l2_l3-supply = <&pm8916_s3>;
 167         vdd_l4_l5_l6-supply = <&pm8916_s4>;
 168         vdd_l7-supply = <&pm8916_s4>;
 169
 170         s3 {
 171                 regulator-min-microvolt = <1200000>;
 172                 regulator-max-microvolt = <1300000>;
 173         };
 174
 175         s4 {
 176                 regulator-min-microvolt = <1800000>;
 177                 regulator-max-microvolt = <2100000>;
 178         };
 179
 180         l1 {
 181                 regulator-min-microvolt = <1225000>;
 182                 regulator-max-microvolt = <1225000>;
 183         };
 184
 185         l2 {
 186                 regulator-min-microvolt = <1200000>;
 187                 regulator-max-microvolt = <1200000>;
 188         };
 189
 190         l4 {
 191                 regulator-min-microvolt = <2050000>;
 192                 regulator-max-microvolt = <2050000>;
 193         };
 194
 195         l5 {
 196                 regulator-min-microvolt = <1800000>;
 197                 regulator-max-microvolt = <1800000>;
 198         };
 199
 200         l6 {
 201                 regulator-min-microvolt = <1800000>;
 202                 regulator-max-microvolt = <1800000>;
 203         };
 204
 205         l7 {
 206                 regulator-min-microvolt = <1800000>;
 207                 regulator-max-microvolt = <1800000>;
 208         };
 209
 210         l8 {
 211                 regulator-min-microvolt = <2850000>;
 212                 regulator-max-microvolt = <2900000>;
 213         };
 214
 215         l9 {
 216                 regulator-min-microvolt = <3300000>;
 217                 regulator-max-microvolt = <3300000>;
 218         };
 219
 220         l10 {
 221                 regulator-min-microvolt = <2700000>;
 222                 regulator-max-microvolt = <2800000>;
 223         };
 224
 225         l11 {
 226                 regulator-min-microvolt = <1800000>;
 227                 regulator-max-microvolt = <2950000>;
 228                 regulator-allow-set-load;
 229                 regulator-system-load = <200000>;
 230         };
 231
 232         l12 {
 233                 regulator-min-microvolt = <1800000>;
 234                 regulator-max-microvolt = <2950000>;
 235         };
 236
 237         l13 {
 238                 regulator-min-microvolt = <3075000>;
 239                 regulator-max-microvolt = <3075000>;
 240         };
 241
 242         l14 {
 243                 regulator-min-microvolt = <1800000>;
 244                 regulator-max-microvolt = <3300000>;
 245         };
 246
 247         l15 {
 248                 regulator-min-microvolt = <1800000>;
 249                 regulator-max-microvolt = <3300000>;
 250         };
 251
 252         l16 {
 253                 regulator-min-microvolt = <1800000>;
 254                 regulator-max-microvolt = <3300000>;
 255         };
 256
 257         l17 {
 258                 regulator-min-microvolt = <2850000>;
 259                 regulator-max-microvolt = <2850000>;
 260         };
 261
 262         l18 {
 263                 regulator-min-microvolt = <2700000>;
 264                 regulator-max-microvolt = <2700000>;
 265         };
 266 };
 267
 268 &msmgpio {
 269         accel_int_default: accel-int-default {
 270                 pins = "gpio115";
 271                 function = "gpio";
 272
 273                 drive-strength = <2>;
 274                 bias-disable;
 275         };
 276
 277         gpio_keys_default: gpio-keys-default {
 278                 pins = "gpio107", "gpio109";
 279                 function = "gpio";
 280
 281                 drive-strength = <2>;
 282                 bias-pull-up;
 283         };
 284
 285         gpio_hall_sensor_default: gpio-hall-sensor-default {
 286                 pins = "gpio52";
 287                 function = "gpio";
 288
 289                 drive-strength = <2>;
 290                 bias-disable;
 291         };
 292
 293         mdss {
 294                 mdss_default: mdss-default {
 295                         pins = "gpio25";
 296                         function = "gpio";
 297
 298                         drive-strength = <8>;
 299                         bias-disable;
 300                 };
 301                 mdss_sleep: mdss-sleep {
 302                         pins = "gpio25";
 303                         function = "gpio";
 304
 305                         drive-strength = <2>;
 306                         bias-pull-down;
 307                 };
 308         };
 309
 310         muic_i2c_default: muic-i2c-default {
 311                 pins = "gpio105", "gpio106";
 312                 function = "gpio";
 313
 314                 drive-strength = <2>;
 315                 bias-disable;
 316         };
 317
 318         muic_int_default: muic-int-default {
 319                 pins = "gpio12";
 320                 function = "gpio";
 321
 322                 drive-strength = <2>;
 323                 bias-disable;
 324         };
 325
 326         tsp_en_default: tsp-en-default {
 327                 pins = "gpio73";
 328                 function = "gpio";
 329
 330                 drive-strength = <2>;
 331                 bias-disable;
 332         };
 333 };