arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include "msm8916-pm8916.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/interrupt-controller/irq.h>
   7
   8 / {
   9         aliases {
  10                 serial0 = &blsp1_uart2;
  11         };
  12
  13         chosen {
  14                 stdout-path = "serial0";
  15         };
  16
  17         reserved-memory {
  18                 /* Additional memory used by Samsung firmware modifications */
  19                 tz-apps@85500000 {
  20                         reg = <0x0 0x85500000 0x0 0xb00000>;
  21                         no-map;
  22                 };
  23         };
  24
  25         gpio-keys {
  26                 compatible = "gpio-keys";
  27
  28                 pinctrl-names = "default";
  29                 pinctrl-0 = <&gpio_keys_default>;
  30
  31                 label = "GPIO Buttons";
  32
  33                 volume-up {
  34                         label = "Volume Up";
  35                         gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_VOLUMEUP>;
  37                 };
  38
  39                 home {
  40                         label = "Home";
  41                         gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_HOMEPAGE>;
  43                 };
  44         };
  45
  46         gpio-hall-sensor {
  47                 compatible = "gpio-keys";
  48
  49                 pinctrl-names = "default";
  50                 pinctrl-0 = <&gpio_hall_sensor_default>;
  51
  52                 label = "GPIO Hall Effect Sensor";
  53
  54                 hall-sensor {
  55                         label = "Hall Effect Sensor";
  56                         gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
  57                         linux,input-type = <EV_SW>;
  58                         linux,code = <SW_LID>;
  59                         linux,can-disable;
  60                 };
  61         };
  62
  63         reg_vdd_tsp: regulator-vdd-tsp {
  64                 compatible = "regulator-fixed";
  65                 regulator-name = "vdd_tsp";
  66                 regulator-min-microvolt = <3300000>;
  67                 regulator-max-microvolt = <3300000>;
  68
  69                 gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
  70                 enable-active-high;
  71
  72                 pinctrl-names = "default";
  73                 pinctrl-0 = <&tsp_en_default>;
  74         };
  75
  76         i2c-muic {
  77                 compatible = "i2c-gpio";
  78                 sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
  79                 scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
  80
  81                 #address-cells = <1>;
  82                 #size-cells = <0>;
  83
  84                 muic: extcon@25 {
  85                         compatible = "siliconmitus,sm5502-muic";
  86
  87                         reg = <0x25>;
  88                         interrupt-parent = <&msmgpio>;
  89                         interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
  90
  91                         pinctrl-names = "default";
  92                         pinctrl-0 = <&muic_int_default>;
  93                 };
  94         };
  95 };
  96
  97 &blsp_i2c2 {
  98         status = "okay";
  99
 100         accelerometer: accelerometer@10 {
 101                 compatible = "bosch,bmc150_accel";
 102                 reg = <0x10>;
 103                 interrupt-parent = <&msmgpio>;
 104                 interrupts = <115 IRQ_TYPE_EDGE_RISING>;
 105
 106                 pinctrl-names = "default";
 107                 pinctrl-0 = <&accel_int_default>;
 108         };
 109
 110         magnetometer@12 {
 111                 compatible = "bosch,bmc150_magn";
 112                 reg = <0x12>;
 113         };
 114 };
 115
 116 &blsp1_uart2 {
 117         status = "okay";
 118 };
 119
 120 &dsi0 {
 121         pinctrl-names = "default", "sleep";
 122         pinctrl-0 = <&mdss_default>;
 123         pinctrl-1 = <&mdss_sleep>;
 124 };
 125
 126 &pm8916_resin {
 127         status = "okay";
 128         linux,code = <KEY_VOLUMEDOWN>;
 129 };
 130
 131 &pronto {
 132         status = "okay";
 133 };
 134
 135 &sdhc_1 {
 136         status = "okay";
 137
 138         pinctrl-names = "default", "sleep";
 139         pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 140         pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
 141 };
 142
 143 &sdhc_2 {
 144         status = "okay";
 145
 146         pinctrl-names = "default", "sleep";
 147         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 148         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 149
 150         cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
 151 };
 152
 153 &usb {
 154         status = "okay";
 155         extcon = <&muic>, <&muic>;
 156 };
 157
 158 &usb_hs_phy {
 159         extcon = <&muic>;
 160 };
 161
 162 &smd_rpm_regulators {
 163         vdd_l1_l2_l3-supply = <&pm8916_s3>;
 164         vdd_l4_l5_l6-supply = <&pm8916_s4>;
 165         vdd_l7-supply = <&pm8916_s4>;
 166
 167         s1 {
 168                 regulator-min-microvolt = <500000>;
 169                 regulator-max-microvolt = <1300000>;
 170         };
 171
 172         s3 {
 173                 regulator-min-microvolt = <1200000>;
 174                 regulator-max-microvolt = <1300000>;
 175         };
 176
 177         s4 {
 178                 regulator-min-microvolt = <1800000>;
 179                 regulator-max-microvolt = <2100000>;
 180         };
 181
 182         l1 {
 183                 regulator-min-microvolt = <1225000>;
 184                 regulator-max-microvolt = <1225000>;
 185         };
 186
 187         l2 {
 188                 regulator-min-microvolt = <1200000>;
 189                 regulator-max-microvolt = <1200000>;
 190         };
 191
 192         l3 {
 193                 regulator-min-microvolt = <500000>;
 194                 regulator-max-microvolt = <1287500>;
 195         };
 196
 197         l4 {
 198                 regulator-min-microvolt = <2050000>;
 199                 regulator-max-microvolt = <2050000>;
 200         };
 201
 202         l5 {
 203                 regulator-min-microvolt = <1800000>;
 204                 regulator-max-microvolt = <1800000>;
 205         };
 206
 207         l6 {
 208                 regulator-min-microvolt = <1800000>;
 209                 regulator-max-microvolt = <1800000>;
 210         };
 211
 212         l7 {
 213                 regulator-min-microvolt = <1800000>;
 214                 regulator-max-microvolt = <1800000>;
 215         };
 216
 217         l8 {
 218                 regulator-min-microvolt = <2850000>;
 219                 regulator-max-microvolt = <2900000>;
 220         };
 221
 222         l9 {
 223                 regulator-min-microvolt = <3300000>;
 224                 regulator-max-microvolt = <3300000>;
 225         };
 226
 227         l10 {
 228                 regulator-min-microvolt = <2700000>;
 229                 regulator-max-microvolt = <2800000>;
 230         };
 231
 232         l11 {
 233                 regulator-min-microvolt = <1800000>;
 234                 regulator-max-microvolt = <2950000>;
 235                 regulator-allow-set-load;
 236                 regulator-system-load = <200000>;
 237         };
 238
 239         l12 {
 240                 regulator-min-microvolt = <1800000>;
 241                 regulator-max-microvolt = <2950000>;
 242         };
 243
 244         l13 {
 245                 regulator-min-microvolt = <3075000>;
 246                 regulator-max-microvolt = <3075000>;
 247         };
 248
 249         l14 {
 250                 regulator-min-microvolt = <1800000>;
 251                 regulator-max-microvolt = <3300000>;
 252         };
 253
 254         l15 {
 255                 regulator-min-microvolt = <1800000>;
 256                 regulator-max-microvolt = <3300000>;
 257         };
 258
 259         l16 {
 260                 regulator-min-microvolt = <1800000>;
 261                 regulator-max-microvolt = <3300000>;
 262         };
 263
 264         l17 {
 265                 regulator-min-microvolt = <2850000>;
 266                 regulator-max-microvolt = <2850000>;
 267         };
 268
 269         l18 {
 270                 regulator-min-microvolt = <2700000>;
 271                 regulator-max-microvolt = <2700000>;
 272         };
 273 };
 274
 275 &msmgpio {
 276         accel_int_default: accel-int-default {
 277                 pins = "gpio115";
 278                 function = "gpio";
 279
 280                 drive-strength = <2>;
 281                 bias-disable;
 282         };
 283
 284         gpio_keys_default: gpio-keys-default {
 285                 pins = "gpio107", "gpio109";
 286                 function = "gpio";
 287
 288                 drive-strength = <2>;
 289                 bias-pull-up;
 290         };
 291
 292         gpio_hall_sensor_default: gpio-hall-sensor-default {
 293                 pins = "gpio52";
 294                 function = "gpio";
 295
 296                 drive-strength = <2>;
 297                 bias-disable;
 298         };
 299
 300         mdss {
 301                 mdss_default: mdss-default {
 302                         pins = "gpio25";
 303                         function = "gpio";
 304
 305                         drive-strength = <8>;
 306                         bias-disable;
 307                 };
 308                 mdss_sleep: mdss-sleep {
 309                         pins = "gpio25";
 310                         function = "gpio";
 311
 312                         drive-strength = <2>;
 313                         bias-pull-down;
 314                 };
 315         };
 316
 317         muic_int_default: muic-int-default {
 318                 pins = "gpio12";
 319                 function = "gpio";
 320
 321                 drive-strength = <2>;
 322                 bias-disable;
 323         };
 324
 325         tsp_en_default: tsp-en-default {
 326                 pins = "gpio73";
 327                 function = "gpio";
 328
 329                 drive-strength = <2>;
 330                 bias-disable;
 331         };
 332 };