arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 /dts-v1/;
   4
   5 #include "msm8916-pm8916.dtsi"
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/leds/common.h>
   9
  10 / {
  11         model = "BQ Aquaris X5 (Longcheer L8910)";
  12         compatible = "longcheer,l8910", "qcom,msm8916";
  13         chassis-type = "handset";
  14
  15         aliases {
  16                 mmc0 = &sdhc_1; /* eMMC */
  17                 mmc1 = &sdhc_2; /* SD card */
  18                 serial0 = &blsp_uart2;
  19         };
  20
  21         chosen {
  22                 stdout-path = "serial0";
  23         };
  24
  25         flash-led-controller {
  26                 compatible = "ocs,ocp8110";
  27                 enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
  28                 flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
  29
  30                 pinctrl-0 = <&camera_front_flash_default>;
  31                 pinctrl-names = "default";
  32
  33                 flash_led: led {
  34                         function = LED_FUNCTION_FLASH;
  35                         color = <LED_COLOR_ID_WHITE>;
  36                         flash-max-timeout-us = <250000>;
  37                 };
  38         };
  39
  40         gpio-keys {
  41                 compatible = "gpio-keys";
  42
  43                 pinctrl-names = "default";
  44                 pinctrl-0 = <&gpio_keys_default>;
  45
  46                 label = "GPIO Buttons";
  47
  48                 button-volume-up {
  49                         label = "Volume Up";
  50                         gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_VOLUMEUP>;
  52                 };
  53         };
  54
  55         leds {
  56                 compatible = "gpio-leds";
  57
  58                 led-0 {
  59                         gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
  60                         color = <LED_COLOR_ID_WHITE>;
  61                         default-state = "off";
  62                         function = LED_FUNCTION_KBD_BACKLIGHT;
  63
  64                         pinctrl-names = "default";
  65                         pinctrl-0 = <&button_backlight_default>;
  66                 };
  67         };
  68
  69         usb_id: usb-id {
  70                 compatible = "linux,extcon-usb-gpio";
  71                 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
  72                 pinctrl-names = "default";
  73                 pinctrl-0 = <&usb_id_default>;
  74         };
  75 };
  76
  77 &blsp_i2c3 {
  78         status = "okay";
  79
  80         magnetometer@d {
  81                 compatible = "asahi-kasei,ak09911";
  82                 reg = <0x0d>;
  83
  84                 vdd-supply = <&pm8916_l17>;
  85                 vid-supply = <&pm8916_l6>;
  86
  87                 reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
  88
  89                 pinctrl-names = "default";
  90                 pinctrl-0 = <&mag_reset_default>;
  91         };
  92
  93         imu@68 {
  94                 compatible = "bosch,bmi160";
  95                 reg = <0x68>;
  96
  97                 vdd-supply = <&pm8916_l17>;
  98                 vddio-supply = <&pm8916_l6>;
  99
 100                 mount-matrix = "0", "1", "0",
 101                               "-1", "0", "0",
 102                                "0", "0", "1";
 103         };
 104 };
 105
 106 &blsp_uart2 {
 107         status = "okay";
 108 };
 109
 110 &pm8916_resin {
 111         status = "okay";
 112         linux,code = <KEY_VOLUMEDOWN>;
 113 };
 114
 115 &pm8916_rpm_regulators {
 116         pm8916_l17: l17 {
 117                 regulator-min-microvolt = <2850000>;
 118                 regulator-max-microvolt = <2850000>;
 119         };
 120 };
 121
 122 &pm8916_vib {
 123         status = "okay";
 124 };
 125
 126 &sdhc_1 {
 127         status = "okay";
 128 };
 129
 130 &sdhc_2 {
 131         status = "okay";
 132
 133         pinctrl-names = "default", "sleep";
 134         pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
 135         pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
 136
 137         cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 138 };
 139
 140 &usb {
 141         status = "okay";
 142         extcon = <&usb_id>, <&usb_id>;
 143 };
 144
 145 &usb_hs_phy {
 146         extcon = <&usb_id>;
 147 };
 148
 149 &wcnss {
 150         status = "okay";
 151 };
 152
 153 &wcnss_iris {
 154         compatible = "qcom,wcn3620";
 155 };
 156
 157 &tlmm {
 158         button_backlight_default: button-backlight-default-state {
 159                 pins = "gpio17";
 160                 function = "gpio";
 161
 162                 drive-strength = <2>;
 163                 bias-disable;
 164         };
 165
 166         camera_front_flash_default: camera-front-flash-default-state {
 167                 pins = "gpio49", "gpio119";
 168                 function = "gpio";
 169                 drive-strength = <2>;
 170                 bias-disable;
 171         };
 172
 173         gpio_keys_default: gpio-keys-default-state {
 174                 pins = "gpio107";
 175                 function = "gpio";
 176
 177                 drive-strength = <2>;
 178                 bias-pull-up;
 179         };
 180
 181         mag_reset_default: mag-reset-default-state {
 182                 pins = "gpio111";
 183                 function = "gpio";
 184
 185                 drive-strength = <2>;
 186                 bias-disable;
 187         };
 188
 189         sdc2_cd_default: sdc2-cd-default-state {
 190                 pins = "gpio38";
 191                 function = "gpio";
 192                 drive-strength = <2>;
 193                 bias-disable;
 194         };
 195
 196         usb_id_default: usb-id-default-state {
 197                 pins = "gpio110";
 198                 function = "gpio";
 199
 200                 drive-strength = <8>;
 201                 bias-pull-up;
 202         };
 203 };