arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 /dts-v1/;
   4
   5 #include "msm8916-pm8916.dtsi"
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/leds/common.h>
   9
  10 / {
  11         model = "Alcatel OneTouch Idol 3 (4.7)";
  12         compatible = "alcatel,idol347", "qcom,msm8916";
  13         chassis-type = "handset";
  14
  15         aliases {
  16                 mmc0 = &sdhc_1; /* eMMC */
  17                 mmc1 = &sdhc_2; /* SD card */
  18                 serial0 = &blsp_uart2;
  19         };
  20
  21         chosen {
  22                 stdout-path = "serial0";
  23         };
  24
  25         gpio-keys {
  26                 compatible = "gpio-keys";
  27
  28                 pinctrl-names = "default";
  29                 pinctrl-0 = <&gpio_keys_default>;
  30
  31                 label = "GPIO Buttons";
  32
  33                 button-volume-up {
  34                         label = "Volume Up";
  35                         gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_VOLUMEUP>;
  37                 };
  38         };
  39
  40         gpio-leds {
  41                 compatible = "gpio-leds";
  42
  43                 pinctrl-names = "default";
  44                 pinctrl-0 = <&gpio_leds_default>;
  45
  46                 led-0 {
  47                         gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
  48                         linux,default-trigger = "torch";
  49                         function = LED_FUNCTION_TORCH;
  50                 };
  51         };
  52
  53         usb_id: usb-id {
  54                 compatible = "linux,extcon-usb-gpio";
  55                 id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
  56                 pinctrl-names = "default";
  57                 pinctrl-0 = <&usb_id_default>;
  58         };
  59 };
  60
  61 &blsp_uart2 {
  62         status = "okay";
  63 };
  64
  65 &blsp_i2c4 {
  66         status = "okay";
  67
  68         touchscreen@26 {
  69                 compatible = "mstar,msg2638";
  70                 reg = <0x26>;
  71                 interrupt-parent = <&tlmm>;
  72                 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
  73                 reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
  74                 pinctrl-names = "default";
  75                 pinctrl-0 = <&ts_int_reset_default>;
  76                 vdd-supply = <&pm8916_l17>;
  77                 vddio-supply = <&pm8916_l5>;
  78                 touchscreen-size-x = <2048>;
  79                 touchscreen-size-y = <2048>;
  80         };
  81 };
  82
  83 &blsp_i2c5 {
  84         status = "okay";
  85
  86         magnetometer@c {
  87                 compatible = "asahi-kasei,ak09911";
  88                 reg = <0x0c>;
  89                 vdd-supply = <&pm8916_l17>;
  90                 vid-supply = <&pm8916_l6>;
  91                 reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
  92                 pinctrl-names = "default";
  93                 pinctrl-0 = <&mag_reset_default>;
  94                 mount-matrix = "0", "1", "0",
  95                                "-1", "0", "0",
  96                                "0", "0", "1";
  97         };
  98
  99         accelerometer@f {
 100                 compatible = "kionix,kxtj21009";
 101                 reg = <0x0f>;
 102                 vdd-supply = <&pm8916_l17>;
 103                 vddio-supply = <&pm8916_l6>;
 104                 interrupt-parent = <&tlmm>;
 105                 interrupts = <31 IRQ_TYPE_EDGE_RISING>;
 106                 pinctrl-names = "default";
 107                 pinctrl-0 = <&accel_int_default>;
 108                 mount-matrix = "-1", "0", "0",
 109                                "0", "1", "0",
 110                                "0", "0", "-1";
 111         };
 112
 113         proximity@48 {
 114                 compatible = "sensortek,stk3310";
 115                 reg = <0x48>;
 116                 interrupt-parent = <&tlmm>;
 117                 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
 118                 pinctrl-names = "default";
 119                 pinctrl-0 = <&proximity_int_default>;
 120         };
 121
 122         gyroscope@68 {
 123                 compatible = "bosch,bmg160";
 124                 reg = <0x68>;
 125                 vdd-supply = <&pm8916_l17>;
 126                 vddio-supply = <&pm8916_l6>;
 127                 interrupt-parent = <&tlmm>;
 128                 interrupts = <97 IRQ_TYPE_EDGE_RISING>,
 129                              <98 IRQ_TYPE_EDGE_RISING>;
 130                 pinctrl-names = "default";
 131                 pinctrl-0 = <&gyro_int_default>;
 132         };
 133 };
 134
 135 &blsp_i2c6 {
 136         status = "okay";
 137
 138         led-controller@68 {
 139                 compatible = "si-en,sn3190";
 140                 reg = <0x68>;
 141                 shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
 142                 pinctrl-names = "default";
 143                 pinctrl-0 = <&led_enable_default &led_shutdown_default>;
 144                 #address-cells = <1>;
 145                 #size-cells = <0>;
 146
 147                 led@1 {
 148                         reg = <1>;
 149                         led-max-microamp = <5000>;
 150                         function = LED_FUNCTION_INDICATOR;
 151                         color = <LED_COLOR_ID_WHITE>;
 152                 };
 153         };
 154 };
 155
 156 &pm8916_resin {
 157         status = "okay";
 158         linux,code = <KEY_VOLUMEDOWN>;
 159 };
 160
 161 &pm8916_rpm_regulators {
 162         pm8916_l17: l17 {
 163                 regulator-min-microvolt = <2850000>;
 164                 regulator-max-microvolt = <2850000>;
 165         };
 166 };
 167
 168 &pm8916_vib {
 169         status = "okay";
 170 };
 171
 172 &sdhc_1 {
 173         status = "okay";
 174 };
 175
 176 &sdhc_2 {
 177         status = "okay";
 178
 179         pinctrl-names = "default", "sleep";
 180         pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
 181         pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
 182
 183         cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 184 };
 185
 186 &usb {
 187         status = "okay";
 188         extcon = <&usb_id>, <&usb_id>;
 189 };
 190
 191 &usb_hs_phy {
 192         extcon = <&usb_id>;
 193 };
 194
 195 &wcnss {
 196         status = "okay";
 197 };
 198
 199 &wcnss_iris {
 200         compatible = "qcom,wcn3620";
 201 };
 202
 203 &tlmm {
 204         accel_int_default: accel-int-default-state {
 205                 pins = "gpio31";
 206                 function = "gpio";
 207
 208                 drive-strength = <2>;
 209                 bias-disable;
 210         };
 211
 212         gpio_keys_default: gpio-keys-default-state {
 213                 pins = "gpio107";
 214                 function = "gpio";
 215
 216                 drive-strength = <2>;
 217                 bias-pull-up;
 218         };
 219
 220         gpio_leds_default: gpio-leds-default-state {
 221                 pins = "gpio32";
 222                 function = "gpio";
 223
 224                 drive-strength = <2>;
 225                 bias-disable;
 226         };
 227
 228         gyro_int_default: gyro-int-default-state {
 229                 pins = "gpio97", "gpio98";
 230                 function = "gpio";
 231
 232                 drive-strength = <2>;
 233                 bias-disable;
 234         };
 235
 236         /*
 237          * The OEM wired an additional GPIO to be asserted so that
 238          * the si-en,sn3190 LED IC works. Since this GPIO is not
 239          * part of the IC datasheet nor supported by the driver,
 240          * force it asserted here.
 241          */
 242         led_enable_default: led-enable-default-state {
 243                 pins = "gpio102";
 244                 function = "gpio";
 245
 246                 drive-strength = <2>;
 247                 bias-disable;
 248                 output-high;
 249         };
 250
 251         led_shutdown_default: led-shutdown-default-state {
 252                 pins = "gpio89";
 253                 function = "gpio";
 254
 255                 drive-strength = <2>;
 256                 bias-disable;
 257         };
 258
 259         mag_reset_default: mag-reset-default-state {
 260                 pins = "gpio8";
 261                 function = "gpio";
 262
 263                 drive-strength = <2>;
 264                 bias-disable;
 265         };
 266
 267         proximity_int_default: proximity-int-default-state {
 268                 pins = "gpio12";
 269                 function = "gpio";
 270
 271                 drive-strength = <6>;
 272                 bias-pull-up;
 273         };
 274
 275         sdc2_cd_default: sdc2-cd-default-state {
 276                 pins = "gpio38";
 277                 function = "gpio";
 278                 drive-strength = <2>;
 279                 bias-disable;
 280         };
 281
 282         ts_int_reset_default: ts-int-reset-default-state {
 283                 pins = "gpio13", "gpio100";
 284                 function = "gpio";
 285
 286                 drive-strength = <2>;
 287                 bias-disable;
 288         };
 289
 290         usb_id_default: usb-id-default-state {
 291                 pins = "gpio69";
 292                 function = "gpio";
 293
 294                 drive-strength = <8>;
 295                 bias-pull-up;
 296         };
 297 };