Merge tag 'batadv-next-pullrequest-20210312' of git://git.open-mesh.org/linux-merge
[linux-2.6-microblaze.git] / arch / arm64 / boot / dts / nvidia / tegra194-p3509-0000.dtsi
1 // SPDX-License-Identifier: GPL-2.0
2
3 #include <dt-bindings/input/linux-event-codes.h>
4 #include <dt-bindings/input/gpio-keys.h>
5
6 / {
7         bus@0 {
8                 aconnect@2900000 {
9                         status = "okay";
10
11                         dma-controller@2930000 {
12                                 status = "okay";
13                         };
14
15                         interrupt-controller@2a40000 {
16                                 status = "okay";
17                         };
18                 };
19
20                 ddc: i2c@3190000 {
21                         status = "okay";
22                 };
23
24                 i2c@3160000 {
25                         eeprom@57 {
26                                 compatible = "atmel,24c02";
27                                 reg = <0x57>;
28
29                                 label = "system";
30                                 vcc-supply = <&vdd_1v8>;
31                                 address-width = <8>;
32                                 pagesize = <8>;
33                                 size = <256>;
34                                 read-only;
35                         };
36                 };
37
38                 hda@3510000 {
39                         nvidia,model = "jetson-xavier-nx-hda";
40                         status = "okay";
41                 };
42
43                 padctl@3520000 {
44                         status = "okay";
45
46                         pads {
47                                 usb2 {
48                                         lanes {
49                                                 usb2-1 {
50                                                         status = "okay";
51                                                 };
52
53                                                 usb2-2 {
54                                                         status = "okay";
55                                                 };
56                                         };
57                                 };
58
59                                 usb3 {
60                                         lanes {
61                                                 usb3-2 {
62                                                         status = "okay";
63                                                 };
64                                         };
65                                 };
66                         };
67
68                         ports {
69                                 usb2-1 {
70                                         mode = "host";
71                                         status = "okay";
72                                 };
73
74                                 usb2-2 {
75                                         mode = "host";
76                                         vbus-supply = <&vdd_5v0_sys>;
77                                         status = "okay";
78                                 };
79
80                                 usb3-2 {
81                                         nvidia,usb2-companion = <1>;
82                                         vbus-supply = <&vdd_5v0_sys>;
83                                         status = "okay";
84                                 };
85                         };
86                 };
87
88                 usb@3610000 {
89                         status = "okay";
90
91                         phys =  <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
92                                 <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
93                                 <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
94                         phy-names = "usb2-1", "usb2-2", "usb3-2";
95                 };
96
97                 spi@3270000 {
98                         status = "okay";
99
100                         flash@0 {
101                                 compatible = "spi-nor";
102                                 reg = <0>;
103                                 spi-max-frequency = <102000000>;
104                                 spi-tx-bus-width = <4>;
105                                 spi-rx-bus-width = <4>;
106                         };
107                 };
108
109                 pwm@32d0000 {
110                         status = "okay";
111                 };
112
113                 host1x@13e00000 {
114                         display-hub@15200000 {
115                                 status = "okay";
116                         };
117
118                         dpaux@155c0000 {
119                                 status = "okay";
120                         };
121
122                         dpaux@155d0000 {
123                                 status = "okay";
124                         };
125
126                         /* DP0 */
127                         sor@15b00000 {
128                                 status = "okay";
129
130                                 avdd-io-hdmi-dp-supply = <&vdd_1v0>;
131                                 vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
132
133                                 nvidia,dpaux = <&dpaux0>;
134                         };
135
136                         /* HDMI */
137                         sor@15b40000 {
138                                 status = "okay";
139
140                                 avdd-io-hdmi-dp-supply = <&vdd_1v0>;
141                                 vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
142                                 hdmi-supply = <&vdd_hdmi>;
143
144                                 nvidia,ddc-i2c-bus = <&ddc>;
145                                 nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1)
146                                                          GPIO_ACTIVE_LOW>;
147                         };
148                 };
149         };
150
151         pcie@14160000 {
152                 status = "okay";
153
154                 vddio-pex-ctl-supply = <&vdd_1v8ao>;
155
156                 phys = <&p2u_hsio_11>;
157                 phy-names = "p2u-0";
158         };
159
160         pcie@141a0000 {
161                 status = "okay";
162
163                 vddio-pex-ctl-supply = <&vdd_1v8ao>;
164
165                 phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
166                        <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
167                        <&p2u_nvhs_6>, <&p2u_nvhs_7>;
168
169                 phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
170                             "p2u-5", "p2u-6", "p2u-7";
171         };
172
173         pcie_ep@141a0000 {
174                 status = "disabled";
175
176                 vddio-pex-ctl-supply = <&vdd_1v8ao>;
177
178                 reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
179
180                 nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
181                                               GPIO_ACTIVE_HIGH>;
182
183                 phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
184                        <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
185                        <&p2u_nvhs_6>, <&p2u_nvhs_7>;
186
187                 phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
188                             "p2u-5", "p2u-6", "p2u-7";
189         };
190
191         fan: fan {
192                 compatible = "pwm-fan";
193                 pwms = <&pwm6 0 45334>;
194
195                 cooling-levels = <0 64 128 255>;
196                 #cooling-cells = <2>;
197         };
198
199         gpio-keys {
200                 compatible = "gpio-keys";
201
202                 force-recovery {
203                         label = "Force Recovery";
204                         gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
205                                        GPIO_ACTIVE_LOW>;
206                         linux,input-type = <EV_KEY>;
207                         linux,code = <KEY_SLEEP>;
208                         debounce-interval = <10>;
209                 };
210
211                 power {
212                         label = "Power";
213                         gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
214                                            GPIO_ACTIVE_LOW>;
215                         linux,input-type = <EV_KEY>;
216                         linux,code = <KEY_POWER>;
217                         debounce-interval = <10>;
218                         wakeup-event-action = <EV_ACT_ASSERTED>;
219                         wakeup-source;
220                 };
221         };
222
223         vdd_5v0_sys: regulator@100 {
224                 compatible = "regulator-fixed";
225                 regulator-name = "VDD_5V_SYS";
226                 regulator-min-microvolt = <5000000>;
227                 regulator-max-microvolt = <5000000>;
228                 regulator-always-on;
229                 regulator-boot-on;
230         };
231
232         vdd_3v3_sys: regulator@101 {
233                 compatible = "regulator-fixed";
234                 regulator-name = "VDD_3V3_SYS";
235                 regulator-min-microvolt = <3300000>;
236                 regulator-max-microvolt = <3300000>;
237                 regulator-always-on;
238                 regulator-boot-on;
239         };
240
241         vdd_3v3_ao: regulator@102 {
242                 compatible = "regulator-fixed";
243                 regulator-name = "VDD_3V3_AO";
244                 regulator-min-microvolt = <3300000>;
245                 regulator-max-microvolt = <3300000>;
246                 regulator-always-on;
247                 regulator-boot-on;
248         };
249
250         vdd_1v8: regulator@103 {
251                 compatible = "regulator-fixed";
252                 regulator-name = "VDD_1V8";
253                 regulator-min-microvolt = <1800000>;
254                 regulator-max-microvolt = <1800000>;
255                 regulator-always-on;
256                 regulator-boot-on;
257         };
258
259         vdd_hdmi: regulator@104 {
260                 compatible = "regulator-fixed";
261                 regulator-name = "VDD_5V0_HDMI_CON";
262                 regulator-min-microvolt = <5000000>;
263                 regulator-max-microvolt = <5000000>;
264                 regulator-always-on;
265                 regulator-boot-on;
266         };
267
268         thermal-zones {
269                 cpu {
270                         polling-delay = <0>;
271                         polling-delay-passive = <500>;
272                         status = "okay";
273
274                         trips {
275                                 cpu_trip_critical: critical {
276                                         temperature = <96500>;
277                                         hysteresis = <0>;
278                                         type = "critical";
279                                 };
280
281                                 cpu_trip_hot: hot {
282                                         temperature = <70000>;
283                                         hysteresis = <2000>;
284                                         type = "hot";
285                                 };
286
287                                 cpu_trip_active: active {
288                                         temperature = <50000>;
289                                         hysteresis = <2000>;
290                                         type = "active";
291                                 };
292
293                                 cpu_trip_passive: passive {
294                                         temperature = <30000>;
295                                         hysteresis = <2000>;
296                                         type = "passive";
297                                 };
298                         };
299
300                         cooling-maps {
301                                 cpu-critical {
302                                         cooling-device = <&fan 3 3>;
303                                         trip = <&cpu_trip_critical>;
304                                 };
305
306                                 cpu-hot {
307                                         cooling-device = <&fan 2 2>;
308                                         trip = <&cpu_trip_hot>;
309                                 };
310
311                                 cpu-active {
312                                         cooling-device = <&fan 1 1>;
313                                         trip = <&cpu_trip_active>;
314                                 };
315
316                                 cpu-passive {
317                                         cooling-device = <&fan 0 0>;
318                                         trip = <&cpu_trip_passive>;
319                                 };
320                         };
321                 };
322
323                 gpu {
324                         polling-delay = <0>;
325                         polling-delay-passive = <500>;
326                         status = "okay";
327
328                         trips {
329                                 gpu_alert0: critical {
330                                         temperature = <99000>;
331                                         hysteresis = <0>;
332                                         type = "critical";
333                                 };
334                         };
335                 };
336
337                 aux {
338                         polling-delay = <0>;
339                         polling-delay-passive = <500>;
340                         status = "okay";
341
342                         trips {
343                                 aux_alert0: critical {
344                                         temperature = <90000>;
345                                         hysteresis = <0>;
346                                         type = "critical";
347                                 };
348                         };
349                 };
350         };
351 };