arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (C) 2016 Marvell Technology Group Ltd.
   4  *
   5  * Device Tree file for MACCHIATOBin Armada 8040 community board platform
   6  */
   7
   8 #include "armada-8040.dtsi"
   9
  10 #include <dt-bindings/gpio/gpio.h>
  11
  12 / {
  13         model = "Marvell 8040 MACCHIATOBin";
  14         compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
  15                         "marvell,armada-ap806-quad", "marvell,armada-ap806";
  16
  17         chosen {
  18                 stdout-path = "serial0:115200n8";
  19         };
  20
  21         memory@0 {
  22                 device_type = "memory";
  23                 reg = <0x0 0x0 0x0 0x80000000>;
  24         };
  25
  26         aliases {
  27                 ethernet0 = &cp0_eth0;
  28                 ethernet1 = &cp1_eth0;
  29                 ethernet2 = &cp1_eth1;
  30                 ethernet3 = &cp1_eth2;
  31         };
  32
  33         /* Regulator labels correspond with schematics */
  34         v_3_3: regulator-3-3v {
  35                 compatible = "regulator-fixed";
  36                 regulator-name = "v_3_3";
  37                 regulator-min-microvolt = <3300000>;
  38                 regulator-max-microvolt = <3300000>;
  39                 regulator-always-on;
  40                 status = "okay";
  41         };
  42
  43         v_vddo_h: regulator-1-8v {
  44                 compatible = "regulator-fixed";
  45                 regulator-name = "v_vddo_h";
  46                 regulator-min-microvolt = <1800000>;
  47                 regulator-max-microvolt = <1800000>;
  48                 regulator-always-on;
  49                 status = "okay";
  50         };
  51
  52         v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
  53                 compatible = "regulator-fixed";
  54                 enable-active-high;
  55                 gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
  56                 pinctrl-names = "default";
  57                 pinctrl-0 = <&cp0_xhci_vbus_pins>;
  58                 regulator-name = "v_5v0_usb3_hst_vbus";
  59                 regulator-min-microvolt = <5000000>;
  60                 regulator-max-microvolt = <5000000>;
  61                 status = "okay";
  62         };
  63
  64         sfp_eth0: sfp-eth0 {
  65                 /* CON15,16 - CPM lane 4 */
  66                 compatible = "sff,sfp";
  67                 i2c-bus = <&sfpp0_i2c>;
  68                 los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
  69                 mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
  70                 tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
  71                 tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
  72                 pinctrl-names = "default";
  73                 pinctrl-0 = <&cp1_sfpp0_pins>;
  74                 maximum-power-milliwatt = <2000>;
  75         };
  76
  77         sfp_eth1: sfp-eth1 {
  78                 /* CON17,18 - CPS lane 4 */
  79                 compatible = "sff,sfp";
  80                 i2c-bus = <&sfpp1_i2c>;
  81                 los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
  82                 mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
  83                 tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
  84                 tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
  85                 pinctrl-names = "default";
  86                 pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
  87                 maximum-power-milliwatt = <2000>;
  88         };
  89
  90         sfp_eth3: sfp-eth3 {
  91                 /* CON13,14 - CPS lane 5 */
  92                 compatible = "sff,sfp";
  93                 i2c-bus = <&sfp_1g_i2c>;
  94                 los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
  95                 mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
  96                 tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
  97                 tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
  98                 pinctrl-names = "default";
  99                 pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
 100                 maximum-power-milliwatt = <2000>;
 101         };
 102 };
 103
 104 &uart0 {
 105         status = "okay";
 106         pinctrl-0 = <&uart0_pins>;
 107         pinctrl-names = "default";
 108 };
 109
 110 &ap_sdhci0 {
 111         bus-width = <8>;
 112         /*
 113          * Not stable in HS modes - phy needs "more calibration", so add
 114          * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
 115          */
 116         marvell,xenon-phy-slow-mode;
 117         no-1-8-v;
 118         no-sd;
 119         no-sdio;
 120         non-removable;
 121         status = "okay";
 122         vqmmc-supply = <&v_vddo_h>;
 123 };
 124
 125 &cp0_i2c0 {
 126         clock-frequency = <100000>;
 127         pinctrl-names = "default";
 128         pinctrl-0 = <&cp0_i2c0_pins>;
 129         status = "okay";
 130 };
 131
 132 &cp0_i2c1 {
 133         clock-frequency = <100000>;
 134         pinctrl-names = "default";
 135         pinctrl-0 = <&cp0_i2c1_pins>;
 136         status = "okay";
 137
 138         i2c-switch@70 {
 139                 compatible = "nxp,pca9548";
 140                 #address-cells = <1>;
 141                 #size-cells = <0>;
 142                 reg = <0x70>;
 143
 144                 sfpp0_i2c: i2c@0 {
 145                         #address-cells = <1>;
 146                         #size-cells = <0>;
 147                         reg = <0>;
 148                 };
 149                 sfpp1_i2c: i2c@1 {
 150                         #address-cells = <1>;
 151                         #size-cells = <0>;
 152                         reg = <1>;
 153                 };
 154                 sfp_1g_i2c: i2c@2 {
 155                         #address-cells = <1>;
 156                         #size-cells = <0>;
 157                         reg = <2>;
 158                 };
 159         };
 160 };
 161
 162 /* J25 UART header */
 163 &cp0_uart1 {
 164         pinctrl-names = "default";
 165         pinctrl-0 = <&cp0_uart1_pins>;
 166         status = "okay";
 167 };
 168
 169 &cp0_mdio {
 170         pinctrl-names = "default";
 171         pinctrl-0 = <&cp0_ge_mdio_pins>;
 172         status = "okay";
 173
 174         ge_phy: ethernet-phy@0 {
 175                 reg = <0>;
 176         };
 177 };
 178
 179 &cp0_pcie0 {
 180         pinctrl-names = "default";
 181         pinctrl-0 = <&cp0_pcie_pins>;
 182         num-lanes = <4>;
 183         num-viewport = <8>;
 184         reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
 185         ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
 186         phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
 187                <&cp0_comphy2 0>, <&cp0_comphy3 0>;
 188         phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
 189                     "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy";
 190         status = "okay";
 191 };
 192
 193 &cp0_pinctrl {
 194         cp0_ge_mdio_pins: ge-mdio-pins {
 195                 marvell,pins = "mpp32", "mpp34";
 196                 marvell,function = "ge";
 197         };
 198         cp0_i2c1_pins: i2c1-pins {
 199                 marvell,pins = "mpp35", "mpp36";
 200                 marvell,function = "i2c1";
 201         };
 202         cp0_i2c0_pins: i2c0-pins {
 203                 marvell,pins = "mpp37", "mpp38";
 204                 marvell,function = "i2c0";
 205         };
 206         cp0_uart1_pins: uart1-pins {
 207                 marvell,pins = "mpp40", "mpp41";
 208                 marvell,function = "uart1";
 209         };
 210         cp0_xhci_vbus_pins: xhci0-vbus-pins {
 211                 marvell,pins = "mpp47";
 212                 marvell,function = "gpio";
 213         };
 214         cp0_sfp_1g_pins: sfp-1g-pins {
 215                 marvell,pins = "mpp51", "mpp53", "mpp54";
 216                 marvell,function = "gpio";
 217         };
 218         cp0_pcie_pins: pcie-pins {
 219                 marvell,pins = "mpp52";
 220                 marvell,function = "gpio";
 221         };
 222         cp0_sdhci_pins: sdhci-pins {
 223                 marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
 224                                "mpp60", "mpp61";
 225                 marvell,function = "sdio";
 226         };
 227         cp0_sfpp1_pins: sfpp1-pins {
 228                 marvell,pins = "mpp62";
 229                 marvell,function = "gpio";
 230         };
 231 };
 232
 233 &cp0_ethernet {
 234         status = "okay";
 235 };
 236
 237 &cp0_eth0 {
 238         /* Generic PHY, providing serdes lanes */
 239         phys = <&cp0_comphy4 0>;
 240 };
 241
 242 &cp0_sata0 {
 243         status = "okay";
 244
 245         /* CPM Lane 5 - U29 */
 246         sata-port@1 {
 247                 phys = <&cp0_comphy5 1>;
 248                 phy-names = "cp0-sata0-1-phy";
 249         };
 250 };
 251
 252 &cp0_sdhci0 {
 253         /* U6 */
 254         broken-cd;
 255         bus-width = <4>;
 256         pinctrl-names = "default";
 257         pinctrl-0 = <&cp0_sdhci_pins>;
 258         status = "okay";
 259         vqmmc-supply = <&v_3_3>;
 260 };
 261
 262 &cp0_utmi {
 263         status = "okay";
 264 };
 265
 266 &cp0_usb3_0 {
 267         /* J38? - USB2.0 only */
 268         phys = <&cp0_utmi0>;
 269         phy-names = "utmi";
 270         dr_mode = "host";
 271         status = "okay";
 272 };
 273
 274 &cp0_usb3_1 {
 275         /* J38? - USB2.0 only */
 276         phys = <&cp0_utmi1>;
 277         phy-names = "utmi";
 278         dr_mode = "host";
 279         status = "okay";
 280 };
 281
 282 &cp1_ethernet {
 283         status = "okay";
 284 };
 285
 286 &cp1_eth0 {
 287         /* Generic PHY, providing serdes lanes */
 288         phys = <&cp1_comphy4 0>;
 289 };
 290
 291 &cp1_eth1 {
 292         /* CPS Lane 0 - J5 (Gigabit RJ45) */
 293         status = "okay";
 294         /* Network PHY */
 295         phy = <&ge_phy>;
 296         phy-mode = "sgmii";
 297         /* Generic PHY, providing serdes lanes */
 298         phys = <&cp1_comphy0 1>;
 299 };
 300
 301 &cp1_eth2 {
 302         /* CPS Lane 5 */
 303         status = "okay";
 304         /* Network PHY */
 305         phy-mode = "2500base-x";
 306         managed = "in-band-status";
 307         /* Generic PHY, providing serdes lanes */
 308         phys = <&cp1_comphy5 2>;
 309         sfp = <&sfp_eth3>;
 310 };
 311
 312 &cp1_pinctrl {
 313         cp1_sfpp1_pins: sfpp1-pins {
 314                 marvell,pins = "mpp8", "mpp10", "mpp11";
 315                 marvell,function = "gpio";
 316         };
 317         cp1_spi1_pins: spi1-pins {
 318                 marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
 319                 marvell,function = "spi1";
 320         };
 321         cp1_uart0_pins: uart0-pins {
 322                 marvell,pins = "mpp6", "mpp7";
 323                 marvell,function = "uart0";
 324         };
 325         cp1_sfp_1g_pins: sfp-1g-pins {
 326                 marvell,pins = "mpp24";
 327                 marvell,function = "gpio";
 328         };
 329         cp1_sfpp0_pins: sfpp0-pins {
 330                 marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
 331                 marvell,function = "gpio";
 332         };
 333 };
 334
 335 /* J27 UART header */
 336 &cp1_uart0 {
 337         pinctrl-names = "default";
 338         pinctrl-0 = <&cp1_uart0_pins>;
 339         status = "okay";
 340 };
 341
 342 &cp1_sata0 {
 343         status = "okay";
 344
 345         /* CPS Lane 1 - U32 */
 346         sata-port@0 {
 347                 phys = <&cp1_comphy1 0>;
 348                 phy-names = "cp1-sata0-0-phy";
 349         };
 350
 351         /* CPS Lane 3 - U31 */
 352         sata-port@1 {
 353                 phys = <&cp1_comphy3 1>;
 354                 phy-names = "cp1-sata0-1-phy";
 355         };
 356 };
 357
 358 &cp1_spi1 {
 359         pinctrl-names = "default";
 360         pinctrl-0 = <&cp1_spi1_pins>;
 361         status = "okay";
 362
 363         spi-flash@0 {
 364                 compatible = "st,w25q32";
 365                 spi-max-frequency = <50000000>;
 366                 reg = <0>;
 367         };
 368 };
 369
 370 &cp1_comphy2 {
 371         cp1_usbh0_con: connector {
 372                 compatible = "usb-a-connector";
 373                 phy-supply = <&v_5v0_usb3_hst_vbus>;
 374         };
 375 };
 376
 377 &cp1_utmi {
 378         status = "okay";
 379 };
 380
 381 &cp1_usb3_0 {
 382         /* CPS Lane 2 - CON7 */
 383         phys = <&cp1_comphy2 0>, <&cp1_utmi0>;
 384         phy-names = "cp1-usb3h0-comphy", "utmi";
 385         dr_mode = "host";
 386         status = "okay";
 387 };