Merge branch 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall...
[linux-2.6-microblaze.git] / arch / arm64 / boot / dts / marvell / armada-37xx.dtsi
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3  * Device Tree Include file for Marvell Armada 37xx family of SoCs.
4  *
5  * Copyright (C) 2016 Marvell
6  *
7  * Gregory CLEMENT <gregory.clement@free-electrons.com>
8  *
9  */
10
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12
13 / {
14         model = "Marvell Armada 37xx SoC";
15         compatible = "marvell,armada3700";
16         interrupt-parent = <&gic>;
17         #address-cells = <2>;
18         #size-cells = <2>;
19
20         aliases {
21                 serial0 = &uart0;
22                 serial1 = &uart1;
23         };
24
25         reserved-memory {
26                 #address-cells = <2>;
27                 #size-cells = <2>;
28                 ranges;
29
30                 /*
31                  * The PSCI firmware region depicted below is the default one
32                  * and should be updated by the bootloader.
33                  */
34                 psci-area@4000000 {
35                         reg = <0 0x4000000 0 0x200000>;
36                         no-map;
37                 };
38         };
39
40         cpus {
41                 #address-cells = <1>;
42                 #size-cells = <0>;
43                 cpu0: cpu@0 {
44                         device_type = "cpu";
45                         compatible = "arm,cortex-a53";
46                         reg = <0>;
47                         clocks = <&nb_periph_clk 16>;
48                         enable-method = "psci";
49                 };
50         };
51
52         psci {
53                 compatible = "arm,psci-0.2";
54                 method = "smc";
55         };
56
57         timer {
58                 compatible = "arm,armv8-timer";
59                 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
60                              <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
61                              <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
62                              <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
63         };
64
65         pmu {
66                 compatible = "arm,armv8-pmuv3";
67                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
68         };
69
70         soc {
71                 compatible = "simple-bus";
72                 #address-cells = <2>;
73                 #size-cells = <2>;
74                 ranges;
75
76                 internal-regs@d0000000 {
77                         #address-cells = <1>;
78                         #size-cells = <1>;
79                         compatible = "simple-bus";
80                         /* 32M internal register @ 0xd000_0000 */
81                         ranges = <0x0 0x0 0xd0000000 0x2000000>;
82
83                         wdt: watchdog@8300 {
84                                 compatible = "marvell,armada-3700-wdt";
85                                 reg = <0x8300 0x40>;
86                                 marvell,system-controller = <&cpu_misc>;
87                                 clocks = <&xtalclk>;
88                         };
89
90                         cpu_misc: system-controller@d000 {
91                                 compatible = "marvell,armada-3700-cpu-misc",
92                                              "syscon";
93                                 reg = <0xd000 0x1000>;
94                         };
95
96                         spi0: spi@10600 {
97                                 compatible = "marvell,armada-3700-spi";
98                                 #address-cells = <1>;
99                                 #size-cells = <0>;
100                                 reg = <0x10600 0xA00>;
101                                 clocks = <&nb_periph_clk 7>;
102                                 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
103                                 num-cs = <4>;
104                                 status = "disabled";
105                         };
106
107                         i2c0: i2c@11000 {
108                                 compatible = "marvell,armada-3700-i2c";
109                                 reg = <0x11000 0x24>;
110                                 #address-cells = <1>;
111                                 #size-cells = <0>;
112                                 clocks = <&nb_periph_clk 10>;
113                                 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
114                                 mrvl,i2c-fast-mode;
115                                 status = "disabled";
116                         };
117
118                         i2c1: i2c@11080 {
119                                 compatible = "marvell,armada-3700-i2c";
120                                 reg = <0x11080 0x24>;
121                                 #address-cells = <1>;
122                                 #size-cells = <0>;
123                                 clocks = <&nb_periph_clk 9>;
124                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
125                                 mrvl,i2c-fast-mode;
126                                 status = "disabled";
127                         };
128
129                         avs: avs@11500 {
130                                 compatible = "marvell,armada-3700-avs",
131                                              "syscon";
132                                 reg = <0x11500 0x40>;
133                         };
134
135                         uart0: serial@12000 {
136                                 compatible = "marvell,armada-3700-uart";
137                                 reg = <0x12000 0x18>;
138                                 clocks = <&xtalclk>;
139                                 interrupts =
140                                 <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
141                                 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
142                                 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
143                                 interrupt-names = "uart-sum", "uart-tx", "uart-rx";
144                                 status = "disabled";
145                         };
146
147                         uart1: serial@12200 {
148                                 compatible = "marvell,armada-3700-uart-ext";
149                                 reg = <0x12200 0x30>;
150                                 clocks = <&xtalclk>;
151                                 interrupts =
152                                 <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
153                                 <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
154                                 interrupt-names = "uart-tx", "uart-rx";
155                                 status = "disabled";
156                         };
157
158                         nb_periph_clk: nb-periph-clk@13000 {
159                                 compatible = "marvell,armada-3700-periph-clock-nb",
160                                              "syscon";
161                                 reg = <0x13000 0x100>;
162                                 clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
163                                 <&tbg 3>, <&xtalclk>;
164                                 #clock-cells = <1>;
165                         };
166
167                         sb_periph_clk: sb-periph-clk@18000 {
168                                 compatible = "marvell,armada-3700-periph-clock-sb";
169                                 reg = <0x18000 0x100>;
170                                 clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
171                                 <&tbg 3>, <&xtalclk>;
172                                 #clock-cells = <1>;
173                         };
174
175                         tbg: tbg@13200 {
176                                 compatible = "marvell,armada-3700-tbg-clock";
177                                 reg = <0x13200 0x100>;
178                                 clocks = <&xtalclk>;
179                                 #clock-cells = <1>;
180                         };
181
182                         pinctrl_nb: pinctrl@13800 {
183                                 compatible = "marvell,armada3710-nb-pinctrl",
184                                              "syscon", "simple-mfd";
185                                 reg = <0x13800 0x100>, <0x13C00 0x20>;
186                                 /* MPP1[19:0] */
187                                 gpionb: gpio {
188                                         #gpio-cells = <2>;
189                                         gpio-ranges = <&pinctrl_nb 0 0 36>;
190                                         gpio-controller;
191                                         interrupt-controller;
192                                         #interrupt-cells = <2>;
193                                         interrupts =
194                                         <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
195                                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
196                                         <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
197                                         <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
198                                         <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
199                                         <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
200                                         <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
201                                         <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
202                                         <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
203                                         <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
204                                         <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
205                                         <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
206                                 };
207
208                                 xtalclk: xtal-clk {
209                                         compatible = "marvell,armada-3700-xtal-clock";
210                                         clock-output-names = "xtal";
211                                         #clock-cells = <0>;
212                                 };
213
214                                 spi_quad_pins: spi-quad-pins {
215                                         groups = "spi_quad";
216                                         function = "spi";
217                                 };
218
219                                 spi_cs1_pins: spi-cs1-pins {
220                                         groups = "spi_cs1";
221                                         function = "spi";
222                                 };
223
224                                 i2c1_pins: i2c1-pins {
225                                         groups = "i2c1";
226                                         function = "i2c";
227                                 };
228
229                                 i2c2_pins: i2c2-pins {
230                                         groups = "i2c2";
231                                         function = "i2c";
232                                 };
233
234                                 uart1_pins: uart1-pins {
235                                         groups = "uart1";
236                                         function = "uart";
237                                 };
238
239                                 uart2_pins: uart2-pins {
240                                         groups = "uart2";
241                                         function = "uart";
242                                 };
243
244                                 mmc_pins: mmc-pins {
245                                         groups = "emmc_nb";
246                                         function = "emmc";
247                                 };
248                         };
249
250                         nb_pm: syscon@14000 {
251                                 compatible = "marvell,armada-3700-nb-pm",
252                                              "syscon";
253                                 reg = <0x14000 0x60>;
254                         };
255
256                         comphy: phy@18300 {
257                                 compatible = "marvell,comphy-a3700";
258                                 reg = <0x18300 0x300>,
259                                       <0x1F000 0x400>,
260                                       <0x5C000 0x400>,
261                                       <0xe0178 0x8>;
262                                 reg-names = "comphy",
263                                             "lane1_pcie_gbe",
264                                             "lane0_usb3_gbe",
265                                             "lane2_sata_usb3";
266                                 #address-cells = <1>;
267                                 #size-cells = <0>;
268
269                                 comphy0: phy@0 {
270                                         reg = <0>;
271                                         #phy-cells = <1>;
272                                 };
273
274                                 comphy1: phy@1 {
275                                         reg = <1>;
276                                         #phy-cells = <1>;
277                                 };
278
279                                 comphy2: phy@2 {
280                                         reg = <2>;
281                                         #phy-cells = <1>;
282                                 };
283                         };
284
285                         pinctrl_sb: pinctrl@18800 {
286                                 compatible = "marvell,armada3710-sb-pinctrl",
287                                              "syscon", "simple-mfd";
288                                 reg = <0x18800 0x100>, <0x18C00 0x20>;
289                                 /* MPP2[23:0] */
290                                 gpiosb: gpio {
291                                         #gpio-cells = <2>;
292                                         gpio-ranges = <&pinctrl_sb 0 0 30>;
293                                         gpio-controller;
294                                         interrupt-controller;
295                                         #interrupt-cells = <2>;
296                                         interrupts =
297                                         <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
298                                         <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
299                                         <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
300                                         <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
301                                         <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
302                                 };
303
304                                 rgmii_pins: mii-pins {
305                                         groups = "rgmii";
306                                         function = "mii";
307                                 };
308
309                                 smi_pins: smi-pins {
310                                         groups = "smi";
311                                         function = "smi";
312                                 };
313
314                                 sdio_pins: sdio-pins {
315                                         groups = "sdio_sb";
316                                         function = "sdio";
317                                 };
318
319                                 pcie_reset_pins: pcie-reset-pins {
320                                         groups = "pcie1"; /* this actually controls "pcie1_reset" */
321                                         function = "gpio";
322                                 };
323
324                                 pcie_clkreq_pins: pcie-clkreq-pins {
325                                         groups = "pcie1_clkreq";
326                                         function = "pcie";
327                                 };
328                         };
329
330                         eth0: ethernet@30000 {
331                                    compatible = "marvell,armada-3700-neta";
332                                    reg = <0x30000 0x4000>;
333                                    interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
334                                    clocks = <&sb_periph_clk 8>;
335                                    status = "disabled";
336                         };
337
338                         mdio: mdio@32004 {
339                                 #address-cells = <1>;
340                                 #size-cells = <0>;
341                                 compatible = "marvell,orion-mdio";
342                                 reg = <0x32004 0x4>;
343                         };
344
345                         eth1: ethernet@40000 {
346                                 compatible = "marvell,armada-3700-neta";
347                                 reg = <0x40000 0x4000>;
348                                 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
349                                 clocks = <&sb_periph_clk 7>;
350                                 status = "disabled";
351                         };
352
353                         usb3: usb@58000 {
354                                 compatible = "marvell,armada3700-xhci",
355                                 "generic-xhci";
356                                 reg = <0x58000 0x4000>;
357                                 marvell,usb-misc-reg = <&usb32_syscon>;
358                                 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
359                                 clocks = <&sb_periph_clk 12>;
360                                 phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
361                                 phy-names = "usb3-phy", "usb2-utmi-otg-phy";
362                                 status = "disabled";
363                         };
364
365                         usb2_utmi_otg_phy: phy@5d000 {
366                                 compatible = "marvell,a3700-utmi-otg-phy";
367                                 reg = <0x5d000 0x800>;
368                                 marvell,usb-misc-reg = <&usb32_syscon>;
369                                 #phy-cells = <0>;
370                         };
371
372                         usb32_syscon: system-controller@5d800 {
373                                 compatible = "marvell,armada-3700-usb2-host-device-misc",
374                                 "syscon";
375                                 reg = <0x5d800 0x800>;
376                         };
377
378                         usb2: usb@5e000 {
379                                 compatible = "marvell,armada-3700-ehci";
380                                 reg = <0x5e000 0x1000>;
381                                 marvell,usb-misc-reg = <&usb2_syscon>;
382                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
383                                 phys = <&usb2_utmi_host_phy>;
384                                 phy-names = "usb2-utmi-host-phy";
385                                 status = "disabled";
386                         };
387
388                         usb2_utmi_host_phy: phy@5f000 {
389                                 compatible = "marvell,a3700-utmi-host-phy";
390                                 reg = <0x5f000 0x800>;
391                                 marvell,usb-misc-reg = <&usb2_syscon>;
392                                 #phy-cells = <0>;
393                         };
394
395                         usb2_syscon: system-controller@5f800 {
396                                 compatible = "marvell,armada-3700-usb2-host-misc",
397                                 "syscon";
398                                 reg = <0x5f800 0x800>;
399                         };
400
401                         xor@60900 {
402                                 compatible = "marvell,armada-3700-xor";
403                                 reg = <0x60900 0x100>,
404                                       <0x60b00 0x100>;
405
406                                 xor10 {
407                                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
408                                 };
409                                 xor11 {
410                                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
411                                 };
412                         };
413
414                         crypto: crypto@90000 {
415                                 compatible = "inside-secure,safexcel-eip97ies";
416                                 reg = <0x90000 0x20000>;
417                                 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
418                                              <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
419                                              <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
420                                              <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
421                                              <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
422                                              <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
423                                 interrupt-names = "mem", "ring0", "ring1",
424                                                   "ring2", "ring3", "eip";
425                                 clocks = <&nb_periph_clk 15>;
426                         };
427
428                         rwtm: mailbox@b0000 {
429                                 compatible = "marvell,armada-3700-rwtm-mailbox";
430                                 reg = <0xb0000 0x100>;
431                                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
432                                 #mbox-cells = <1>;
433                         };
434
435                         sdhci1: sdhci@d0000 {
436                                 compatible = "marvell,armada-3700-sdhci",
437                                              "marvell,sdhci-xenon";
438                                 reg = <0xd0000 0x300>,
439                                       <0x1e808 0x4>;
440                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
441                                 clocks = <&nb_periph_clk 0>;
442                                 clock-names = "core";
443                                 status = "disabled";
444                         };
445
446                         sdhci0: sdhci@d8000 {
447                                 compatible = "marvell,armada-3700-sdhci",
448                                              "marvell,sdhci-xenon";
449                                 reg = <0xd8000 0x300>,
450                                       <0x17808 0x4>;
451                                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
452                                 clocks = <&nb_periph_clk 0>;
453                                 clock-names = "core";
454                                 status = "disabled";
455                         };
456
457                         sata: sata@e0000 {
458                                 compatible = "marvell,armada-3700-ahci";
459                                 reg = <0xe0000 0x178>;
460                                 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
461                                 clocks = <&nb_periph_clk 1>;
462                                 phys = <&comphy2 0>;
463                                 phy-names = "sata-phy";
464                                 status = "disabled";
465                         };
466
467                         gic: interrupt-controller@1d00000 {
468                                 compatible = "arm,gic-v3";
469                                 #interrupt-cells = <3>;
470                                 interrupt-controller;
471                                 reg = <0x1d00000 0x10000>, /* GICD */
472                                       <0x1d40000 0x40000>, /* GICR */
473                                       <0x1d80000 0x2000>,  /* GICC */
474                                       <0x1d90000 0x2000>,  /* GICH */
475                                       <0x1da0000 0x20000>; /* GICV */
476                                 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
477                         };
478                 };
479
480                 pcie0: pcie@d0070000 {
481                         compatible = "marvell,armada-3700-pcie";
482                         device_type = "pci";
483                         status = "disabled";
484                         reg = <0 0xd0070000 0 0x20000>;
485                         #address-cells = <3>;
486                         #size-cells = <2>;
487                         bus-range = <0x00 0xff>;
488                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
489                         #interrupt-cells = <1>;
490                         msi-parent = <&pcie0>;
491                         msi-controller;
492                         ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
493                                   0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
494                         interrupt-map-mask = <0 0 0 7>;
495                         interrupt-map = <0 0 0 1 &pcie_intc 0>,
496                                         <0 0 0 2 &pcie_intc 1>,
497                                         <0 0 0 3 &pcie_intc 2>,
498                                         <0 0 0 4 &pcie_intc 3>;
499                         max-link-speed = <2>;
500                         phys = <&comphy1 0>;
501                         pcie_intc: interrupt-controller {
502                                 interrupt-controller;
503                                 #interrupt-cells = <1>;
504                         };
505                 };
506         };
507 };