arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2018-2019 Purism SPC
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "dt-bindings/input/input.h"
   9 #include <dt-bindings/interrupt-controller/irq.h>
  10 #include "dt-bindings/pwm/pwm.h"
  11 #include "dt-bindings/usb/pd.h"
  12 #include "imx8mq.dtsi"
  13
  14 / {
  15         model = "Purism Librem 5 devkit";
  16         compatible = "purism,librem5-devkit", "fsl,imx8mq";
  17
  18         backlight_dsi: backlight-dsi {
  19                 compatible = "pwm-backlight";
  20                 /* 200 Hz for the PAM2841 */
  21                 pwms = <&pwm1 0 5000000>;
  22                 brightness-levels = <0 100>;
  23                 num-interpolated-steps = <100>;
  24                 /* Default brightness level (index into the array defined by */
  25                 /* the "brightness-levels" property) */
  26                 default-brightness-level = <0>;
  27                 power-supply = <&reg_22v4_p>;
  28         };
  29
  30         chosen {
  31                 stdout-path = &uart1;
  32         };
  33
  34         gpio-keys {
  35                 compatible = "gpio-keys";
  36                 pinctrl-names = "default";
  37                 pinctrl-0 = <&pinctrl_gpio_keys>;
  38
  39                 btn1 {
  40                         label = "VOL_UP";
  41                         gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
  42                         wakeup-source;
  43                         linux,code = <KEY_VOLUMEUP>;
  44                 };
  45
  46                 btn2 {
  47                         label = "VOL_DOWN";
  48                         gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
  49                         wakeup-source;
  50                         linux,code = <KEY_VOLUMEDOWN>;
  51                 };
  52
  53                 hp-det {
  54                         label = "HP_DET";
  55                         gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
  56                         wakeup-source;
  57                         linux,code = <KEY_HP>;
  58                 };
  59
  60                 wwan-wake {
  61                         label = "WWAN_WAKE";
  62                         gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
  63                         interrupt-parent = <&gpio3>;
  64                         interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
  65                         wakeup-source;
  66                         linux,code = <KEY_PHONE>;
  67                 };
  68         };
  69
  70         leds {
  71                 compatible = "gpio-leds";
  72                 pinctrl-names = "default";
  73                 pinctrl-0 = <&pinctrl_gpio_leds>;
  74
  75                 led1 {
  76                         label = "LED 1";
  77                         gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
  78                         default-state = "off";
  79                 };
  80         };
  81
  82         pmic_osc: clock-pmic {
  83                 compatible = "fixed-clock";
  84                 #clock-cells = <0>;
  85                 clock-frequency = <32768>;
  86                 clock-output-names = "pmic_osc";
  87         };
  88
  89         reg_1v8_p: regulator-1v8-p {
  90                 compatible = "regulator-fixed";
  91                 regulator-name = "1v8_p";
  92                 regulator-min-microvolt = <1800000>;
  93                 regulator-max-microvolt = <1800000>;
  94                 vin-supply = <&reg_pwr_en>;
  95         };
  96
  97         reg_2v8_p: regulator-2v8-p {
  98                 compatible = "regulator-fixed";
  99                 regulator-name = "2v8_p";
 100                 regulator-min-microvolt = <2800000>;
 101                 regulator-max-microvolt = <2800000>;
 102                 vin-supply = <&reg_pwr_en>;
 103         };
 104
 105         reg_3v3_p: regulator-3v3-p {
 106                 compatible = "regulator-fixed";
 107                 regulator-name = "3v3_p";
 108                 regulator-min-microvolt = <3300000>;
 109                 regulator-max-microvolt = <3300000>;
 110                 vin-supply = <&reg_pwr_en>;
 111
 112                 regulator-state-mem {
 113                         regulator-on-in-suspend;
 114                 };
 115         };
 116
 117         reg_5v_p: regulator-5v-p {
 118                 compatible = "regulator-fixed";
 119                 regulator-name = "5v_p";
 120                 regulator-min-microvolt = <5000000>;
 121                 regulator-max-microvolt = <5000000>;
 122                 vin-supply = <&reg_pwr_en>;
 123
 124                 regulator-state-mem {
 125                         regulator-on-in-suspend;
 126                 };
 127         };
 128
 129         reg_22v4_p: regulator-22v4-p  {
 130                 compatible = "regulator-fixed";
 131                 regulator-name = "22v4_P";
 132                 regulator-min-microvolt = <22400000>;
 133                 regulator-max-microvolt = <22400000>;
 134                 vin-supply = <&reg_pwr_en>;
 135         };
 136
 137         reg_pwr_en: regulator-pwr-en {
 138                 compatible = "regulator-fixed";
 139                 pinctrl-names = "default";
 140                 pinctrl-0 = <&pinctrl_pwr_en>;
 141                 regulator-name = "PWR_EN";
 142                 regulator-min-microvolt = <3300000>;
 143                 regulator-max-microvolt = <3300000>;
 144                 gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 145                 enable-active-high;
 146                 regulator-always-on;
 147         };
 148
 149         reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 150                 compatible = "regulator-fixed";
 151                 pinctrl-names = "default";
 152                 pinctrl-0 = <&pinctrl_usdhc2_pwr>;
 153                 regulator-name = "VSD_3V3";
 154                 regulator-min-microvolt = <3300000>;
 155                 regulator-max-microvolt = <3300000>;
 156                 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 157                 enable-active-high;
 158                 regulator-always-on;
 159         };
 160
 161         wwan_codec: sound-wwan-codec {
 162                 compatible = "option,gtm601";
 163                 #sound-dai-cells = <0>;
 164         };
 165
 166         sound {
 167                 compatible = "simple-audio-card";
 168                 simple-audio-card,name = "sgtl5000";
 169                 simple-audio-card,format = "i2s";
 170                 simple-audio-card,widgets =
 171                         "Microphone", "Microphone Jack",
 172                         "Headphone", "Headphone Jack",
 173                         "Speaker", "Speaker Ext",
 174                         "Line", "Line In Jack";
 175                 simple-audio-card,routing =
 176                         "MIC_IN", "Microphone Jack",
 177                         "Microphone Jack", "Mic Bias",
 178                         "LINE_IN", "Line In Jack",
 179                         "Headphone Jack", "HP_OUT",
 180                         "Speaker Ext", "LINE_OUT";
 181
 182                 simple-audio-card,cpu {
 183                         sound-dai = <&sai2>;
 184                 };
 185
 186                 simple-audio-card,codec {
 187                         sound-dai = <&sgtl5000>;
 188                         clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
 189                         frame-master;
 190                         bitclock-master;
 191                 };
 192         };
 193
 194         sound-wwan {
 195                 compatible = "simple-audio-card";
 196                 simple-audio-card,name = "SIMCom SIM7100";
 197                 simple-audio-card,format = "dsp_a";
 198
 199                 simple-audio-card,cpu {
 200                         sound-dai = <&sai6>;
 201                 };
 202
 203                 telephony_link_master: simple-audio-card,codec {
 204                         sound-dai = <&wwan_codec>;
 205                         frame-master;
 206                         bitclock-master;
 207                 };
 208         };
 209
 210         vibrator {
 211                 compatible = "gpio-vibrator";
 212                 pinctrl-names = "default";
 213                 pinctrl-0 = <&pinctrl_haptic>;
 214                 enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
 215                 vcc-supply = <&reg_3v3_p>;
 216         };
 217
 218         wifi_pwr_en: regulator-wifi-en {
 219                 compatible = "regulator-fixed";
 220                 pinctrl-names = "default";
 221                 pinctrl-0 = <&pinctrl_wifi_pwr_en>;
 222                 regulator-name = "WIFI_EN";
 223                 regulator-min-microvolt = <3300000>;
 224                 regulator-max-microvolt = <3300000>;
 225                 gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
 226                 enable-active-high;
 227                 regulator-always-on;
 228         };
 229 };
 230
 231 &A53_0 {
 232         cpu-supply = <&buck2_reg>;
 233 };
 234
 235 &A53_1 {
 236         cpu-supply = <&buck2_reg>;
 237 };
 238
 239 &A53_2 {
 240         cpu-supply = <&buck2_reg>;
 241 };
 242
 243 &A53_3 {
 244         cpu-supply = <&buck2_reg>;
 245 };
 246
 247 &clk {
 248         assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
 249         assigned-clock-rates = <786432000>, <722534400>;
 250 };
 251
 252 &dphy {
 253         status = "okay";
 254 };
 255
 256 &fec1 {
 257         pinctrl-names = "default";
 258         pinctrl-0 = <&pinctrl_fec1>;
 259         phy-mode = "rgmii-id";
 260         phy-handle = <&ethphy0>;
 261         fsl,magic-packet;
 262         phy-supply = <&reg_3v3_p>;
 263         status = "okay";
 264
 265         mdio {
 266                 #address-cells = <1>;
 267                 #size-cells = <0>;
 268
 269                 ethphy0: ethernet-phy@1 {
 270                         compatible = "ethernet-phy-ieee802.3-c22";
 271                         reg = <1>;
 272                 };
 273         };
 274 };
 275
 276 &i2c1 {
 277         clock-frequency = <100000>;
 278         pinctrl-names = "default";
 279         pinctrl-0 = <&pinctrl_i2c1>;
 280         status = "okay";
 281
 282         pmic: pmic@4b {
 283                 compatible = "rohm,bd71837";
 284                 reg = <0x4b>;
 285                 pinctrl-names = "default";
 286                 pinctrl-0 = <&pinctrl_pmic>;
 287                 clocks = <&pmic_osc>;
 288                 clock-names = "osc";
 289                 #clock-cells = <0>;
 290                 clock-output-names = "pmic_clk";
 291                 interrupt-parent = <&gpio1>;
 292                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 293                 rohm,reset-snvs-powered;
 294
 295                 regulators {
 296                         buck1_reg: BUCK1 {
 297                                 regulator-name = "buck1";
 298                                 regulator-min-microvolt = <700000>;
 299                                 regulator-max-microvolt = <1300000>;
 300                                 regulator-boot-on;
 301                                 regulator-ramp-delay = <1250>;
 302                                 rohm,dvs-run-voltage = <900000>;
 303                                 rohm,dvs-idle-voltage = <850000>;
 304                                 rohm,dvs-suspend-voltage = <800000>;
 305                         };
 306
 307                         buck2_reg: BUCK2 {
 308                                 regulator-name = "buck2";
 309                                 regulator-min-microvolt = <700000>;
 310                                 regulator-max-microvolt = <1300000>;
 311                                 regulator-boot-on;
 312                                 regulator-ramp-delay = <1250>;
 313                                 rohm,dvs-run-voltage = <1000000>;
 314                                 rohm,dvs-idle-voltage = <900000>;
 315                         };
 316
 317                         buck3_reg: BUCK3 {
 318                                 regulator-name = "buck3";
 319                                 regulator-min-microvolt = <700000>;
 320                                 regulator-max-microvolt = <1300000>;
 321                                 regulator-boot-on;
 322                                 rohm,dvs-run-voltage = <900000>;
 323                         };
 324
 325                         buck4_reg: BUCK4 {
 326                                 regulator-name = "buck4";
 327                                 regulator-min-microvolt = <700000>;
 328                                 regulator-max-microvolt = <1300000>;
 329                                 rohm,dvs-run-voltage = <1000000>;
 330                         };
 331
 332                         buck5_reg: BUCK5 {
 333                                 regulator-name = "buck5";
 334                                 regulator-min-microvolt = <700000>;
 335                                 regulator-max-microvolt = <1350000>;
 336                                 regulator-boot-on;
 337                         };
 338
 339                         buck6_reg: BUCK6 {
 340                                 regulator-name = "buck6";
 341                                 regulator-min-microvolt = <3000000>;
 342                                 regulator-max-microvolt = <3300000>;
 343                                 regulator-boot-on;
 344                         };
 345
 346                         buck7_reg: BUCK7 {
 347                                 regulator-name = "buck7";
 348                                 regulator-min-microvolt = <1605000>;
 349                                 regulator-max-microvolt = <1995000>;
 350                                 regulator-boot-on;
 351                         };
 352
 353                         buck8_reg: BUCK8 {
 354                                 regulator-name = "buck8";
 355                                 regulator-min-microvolt = <800000>;
 356                                 regulator-max-microvolt = <1400000>;
 357                                 regulator-boot-on;
 358                         };
 359
 360                         ldo1_reg: LDO1 {
 361                                 regulator-name = "ldo1";
 362                                 regulator-min-microvolt = <3000000>;
 363                                 regulator-max-microvolt = <3300000>;
 364                                 regulator-boot-on;
 365                                 /* leave on for snvs power button */
 366                                 regulator-always-on;
 367                         };
 368
 369                         ldo2_reg: LDO2 {
 370                                 regulator-name = "ldo2";
 371                                 regulator-min-microvolt = <900000>;
 372                                 regulator-max-microvolt = <900000>;
 373                                 regulator-boot-on;
 374                                 /* leave on for snvs power button */
 375                                 regulator-always-on;
 376                         };
 377
 378                         ldo3_reg: LDO3 {
 379                                 regulator-name = "ldo3";
 380                                 regulator-min-microvolt = <1800000>;
 381                                 regulator-max-microvolt = <3300000>;
 382                                 regulator-boot-on;
 383                         };
 384
 385                         ldo4_reg: LDO4 {
 386                                 regulator-name = "ldo4";
 387                                 regulator-min-microvolt = <900000>;
 388                                 regulator-max-microvolt = <1800000>;
 389                                 regulator-boot-on;
 390                         };
 391
 392                         ldo5_reg: LDO5 {
 393                                 regulator-name = "ldo5";
 394                                 regulator-min-microvolt = <1800000>;
 395                                 regulator-max-microvolt = <3300000>;
 396                         };
 397
 398                         ldo6_reg: LDO6 {
 399                                 regulator-name = "ldo6";
 400                                 regulator-min-microvolt = <900000>;
 401                                 regulator-max-microvolt = <1800000>;
 402                                 regulator-boot-on;
 403                         };
 404
 405                         ldo7_reg: LDO7 {
 406                                 regulator-name = "ldo7";
 407                                 regulator-min-microvolt = <1800000>;
 408                                 regulator-max-microvolt = <3300000>;
 409                                 regulator-boot-on;
 410                         };
 411                 };
 412         };
 413
 414         typec_ptn5100: usb-typec@52 {
 415                 compatible = "nxp,ptn5110";
 416                 reg = <0x52>;
 417                 pinctrl-names = "default";
 418                 pinctrl-0 = <&pinctrl_typec>;
 419                 interrupt-parent = <&gpio3>;
 420                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 421
 422                 connector {
 423                         compatible = "usb-c-connector";
 424                         label = "USB-C";
 425                         data-role = "dual";
 426                         power-role = "dual";
 427                         try-power-role = "sink";
 428                         source-pdos = <PDO_FIXED(5000, 2000,
 429                                 PDO_FIXED_USB_COMM |
 430                                 PDO_FIXED_DUAL_ROLE |
 431                                 PDO_FIXED_DATA_SWAP )>;
 432                         sink-pdos = <PDO_FIXED(5000, 3500, PDO_FIXED_USB_COMM |
 433                                 PDO_FIXED_DUAL_ROLE |
 434                                 PDO_FIXED_DATA_SWAP )
 435                              PDO_VAR(5000, 5000, 3500)>;
 436                         op-sink-microwatt = <10000000>;
 437
 438                         ports {
 439                                 #address-cells = <1>;
 440                                 #size-cells = <0>;
 441
 442                                 port@0 {
 443                                         reg = <0>;
 444
 445                                         usb_con_hs: endpoint {
 446                                                 remote-endpoint = <&typec_hs>;
 447                                         };
 448                                 };
 449
 450                                 port@1 {
 451                                         reg = <1>;
 452
 453                                         usb_con_ss: endpoint {
 454                                                 remote-endpoint = <&typec_ss>;
 455                                         };
 456                                 };
 457                         };
 458                 };
 459         };
 460
 461         rtc@68 {
 462                 compatible = "microcrystal,rv4162";
 463                 reg = <0x68>;
 464                 pinctrl-names = "default";
 465                 pinctrl-0 = <&pinctrl_rtc>;
 466                 interrupt-parent = <&gpio4>;
 467                 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 468         };
 469
 470         charger@6b { /* bq25896 */
 471                 compatible = "ti,bq25890";
 472                 reg = <0x6b>;
 473                 pinctrl-names = "default";
 474                 pinctrl-0 = <&pinctrl_charger>;
 475                 interrupt-parent = <&gpio3>;
 476                 interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
 477                 ti,battery-regulation-voltage = <4192000>; /* 4.192V */
 478                 ti,charge-current = <1600000>; /* 1.6A */
 479                 ti,termination-current = <66000>;  /* 66mA */
 480                 ti,precharge-current = <130000>; /* 130mA */
 481                 ti,minimum-sys-voltage = <3000000>; /* 3V */
 482                 ti,boost-voltage = <5000000>; /* 5V */
 483                 ti,boost-max-current = <50000>; /* 50mA */
 484         };
 485 };
 486
 487 &i2c3 {
 488         clock-frequency = <100000>;
 489         pinctrl-names = "default";
 490         pinctrl-0 = <&pinctrl_i2c3>;
 491         status = "okay";
 492
 493         magnetometer@1e {
 494                 compatible = "st,lsm9ds1-magn";
 495                 reg = <0x1e>;
 496                 pinctrl-names = "default";
 497                 pinctrl-0 = <&pinctrl_imu>;
 498                 interrupt-parent = <&gpio3>;
 499                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 500                 vdd-supply = <&reg_3v3_p>;
 501                 vddio-supply = <&reg_3v3_p>;
 502         };
 503
 504         sgtl5000: audio-codec@a {
 505                 compatible = "fsl,sgtl5000";
 506                 clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
 507                 assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
 508                 assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
 509                 assigned-clock-rates = <24576000>;
 510                 #sound-dai-cells = <0>;
 511                 reg = <0x0a>;
 512                 VDDD-supply = <&reg_1v8_p>;
 513                 VDDIO-supply = <&reg_3v3_p>;
 514                 VDDA-supply = <&reg_3v3_p>;
 515         };
 516
 517         touchscreen@5d {
 518                 compatible = "goodix,gt5688";
 519                 reg = <0x5d>;
 520                 pinctrl-names = "default";
 521                 pinctrl-0 = <&pinctrl_ts>;
 522                 interrupt-parent = <&gpio3>;
 523                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 524                 reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 525                 irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 526                 touchscreen-size-x = <720>;
 527                 touchscreen-size-y = <1440>;
 528                 AVDD28-supply = <&reg_2v8_p>;
 529                 VDDIO-supply = <&reg_1v8_p>;
 530         };
 531
 532         proximity-sensor@60 {
 533                 compatible = "vishay,vcnl4040";
 534                 reg = <0x60>;
 535                 pinctrl-0 = <&pinctrl_prox>;
 536         };
 537
 538         accel-gyro@6a {
 539                 compatible = "st,lsm9ds1-imu";
 540                 reg = <0x6a>;
 541                 vdd-supply = <&reg_3v3_p>;
 542                 vddio-supply = <&reg_3v3_p>;
 543                 mount-matrix =  "1",  "0",  "0",
 544                                 "0",  "1",  "0",
 545                                 "0",  "0", "-1";
 546         };
 547 };
 548
 549 &iomuxc {
 550         pinctrl_bl: blgrp {
 551                 fsl,pins = <
 552                         MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT        0x6 /* DSI_BL_PWM */
 553                 >;
 554         };
 555
 556         pinctrl_bt: btgrp {
 557                 fsl,pins = <
 558                         MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11     0x16 /* nBT_DISABLE */
 559                         MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7      0x10 /* BT_HOST_WAKE */
 560                 >;
 561         };
 562
 563         pinctrl_charger: chargergrp {
 564                 fsl,pins = <
 565                         MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25       0x80 /* CHRG_nINT */
 566                 >;
 567         };
 568
 569         pinctrl_fec1: fec1grp {
 570                 fsl,pins = <
 571                         MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC                 0x3
 572                         MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO               0x3
 573                         MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3           0x1f
 574                         MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2           0x1f
 575                         MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1           0x1f
 576                         MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0           0x1f
 577                         MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3           0x91
 578                         MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2           0x91
 579                         MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1           0x91
 580                         MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0           0x91
 581                         MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC           0x1f
 582                         MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC           0x91
 583                         MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL     0x91
 584                         MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL     0x1f
 585                         MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9               0x19
 586                         MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
 587                 >;
 588         };
 589
 590         pinctrl_ts: tsgrp {
 591                 fsl,pins = <
 592                         MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0         0x16  /* TOUCH INT */
 593                         MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x19  /* TOUCH RST */
 594                 >;
 595         };
 596
 597         pinctrl_gpio_leds: gpioledgrp {
 598                 fsl,pins = <
 599                         MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13      0x16
 600                 >;
 601         };
 602
 603         pinctrl_gpio_keys: gpiokeygrp {
 604                 fsl,pins = <
 605                         MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x16
 606                         MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22        0x16
 607                         MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20        0x180  /* HP_DET */
 608                         MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8      0x80   /* nWoWWAN */
 609                 >;
 610         };
 611
 612         pinctrl_haptic: hapticgrp {
 613                 fsl,pins = <
 614                         MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4         0xc6   /* nHAPTIC */
 615                 >;
 616         };
 617
 618         pinctrl_i2c1: i2c1grp {
 619                 fsl,pins = <
 620                         MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL          0x4000001f
 621                         MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA          0x4000001f
 622                 >;
 623         };
 624
 625         pinctrl_i2c3: i2c3grp {
 626                 fsl,pins = <
 627                         MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL          0x4000001f
 628                         MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA          0x4000001f
 629                 >;
 630         };
 631
 632         pinctrl_imu: imugrp {
 633                 fsl,pins = <
 634                         MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19       0x8  /* IMU_INT */
 635                 >;
 636         };
 637
 638         pinctrl_pmic: pmicgrp {
 639                 fsl,pins = <
 640                         MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3       0x80  /* PMIC intr */
 641                 >;
 642         };
 643
 644         pinctrl_prox: proxgrp {
 645                 fsl,pins = <
 646                         MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12      0x80  /* prox intr */
 647                 >;
 648         };
 649
 650         pinctrl_pwr_en: pwrengrp {
 651                 fsl,pins = <
 652                         MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8       0x06
 653                 >;
 654         };
 655
 656         pinctrl_rtc: rtcgrp {
 657                 fsl,pins = <
 658                         MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29        0x80  /* RTC intr */
 659                 >;
 660         };
 661
 662         pinctrl_sai2: sai2grp {
 663                 fsl,pins = <
 664                         MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
 665                         MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
 666                         MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
 667                         MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0    0xd6
 668                         MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK        0xd6
 669                 >;
 670         };
 671
 672         pinctrl_sai6: sai6grp {
 673                 fsl,pins = <
 674                         MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0    0xd6
 675                         MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC     0xd6
 676                         MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK     0xd6
 677                         MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0    0xd6
 678                 >;
 679         };
 680
 681         pinctrl_typec: typecgrp {
 682                 fsl,pins = <
 683                         MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12             0x16
 684                         MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1               0x80
 685                 >;
 686         };
 687
 688         pinctrl_uart1: uart1grp {
 689                 fsl,pins = <
 690                         MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX             0x49
 691                         MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX             0x49
 692                 >;
 693         };
 694
 695         pinctrl_uart2: uart2grp {
 696                 fsl,pins = <
 697                         MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX             0x49
 698                         MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX             0x49
 699                         MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B          0x49
 700                         MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B          0x49
 701                 >;
 702         };
 703
 704         pinctrl_uart3: uart3grp {
 705                 fsl,pins = <
 706                         MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX             0x49
 707                         MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX             0x49
 708                 >;
 709         };
 710
 711         pinctrl_uart4: uart4grp {
 712                 fsl,pins = <
 713                         MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX           0x49
 714                         MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX           0x49
 715                         MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B        0x49
 716                         MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B         0x49
 717                         MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K      0x49
 718                 >;
 719         };
 720
 721         pinctrl_usdhc1: usdhc1grp {
 722                 fsl,pins = <
 723                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x83
 724                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xc3
 725                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xc3
 726                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xc3
 727                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xc3
 728                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xc3
 729                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xc3
 730                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xc3
 731                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xc3
 732                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xc3
 733                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x83
 734                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 735                 >;
 736         };
 737
 738         pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 739                 fsl,pins = <
 740                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x8d
 741                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xcd
 742                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xcd
 743                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xcd
 744                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xcd
 745                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xcd
 746                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xcd
 747                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xcd
 748                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xcd
 749                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xcd
 750                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x8d
 751                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 752                 >;
 753         };
 754
 755         pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 756                 fsl,pins = <
 757                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x9f
 758                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xdf
 759                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xdf
 760                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xdf
 761                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xdf
 762                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xdf
 763                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xdf
 764                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xdf
 765                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xdf
 766                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xdf
 767                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x9f
 768                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 769                 >;
 770         };
 771
 772         pinctrl_usdhc2_pwr: usdhc2pwrgrp {
 773                 fsl,pins = <
 774                         MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x41
 775                 >;
 776         };
 777
 778         pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 779                 fsl,pins = <
 780                         MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20          0x80 /* WIFI_WAKE */
 781                 >;
 782         };
 783
 784         pinctrl_usdhc2: usdhc2grp {
 785                 fsl,pins = <
 786                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x83
 787                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xc3
 788                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xc3
 789                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xc3
 790                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xc3
 791                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xc3
 792                 >;
 793         };
 794
 795         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 796                 fsl,pins = <
 797                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x8d
 798                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xcd
 799                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xcd
 800                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xcd
 801                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xcd
 802                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xcd
 803                 >;
 804         };
 805
 806         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 807                 fsl,pins = <
 808                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x9f
 809                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xcf
 810                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xcf
 811                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xcf
 812                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xcf
 813                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xcf
 814                 >;
 815         };
 816
 817         pinctrl_wdog: wdoggrp {
 818                 fsl,pins = <
 819                         MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B    0xc6
 820                 >;
 821         };
 822
 823         pinctrl_wifi_pwr_en: wifipwrengrp {
 824                 fsl,pins = <
 825                         MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5         0x06
 826                 >;
 827         };
 828
 829         pinctrl_wwan: wwangrp {
 830                 fsl,pins = <
 831                         MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4       0x09 /* nWWAN_DISABLE */
 832                         MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8      0x80 /* nWoWWAN */
 833                         MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9      0x19 /* WWAN_RESET */
 834                 >;
 835         };
 836 };
 837
 838 &lcdif {
 839         status = "okay";
 840 };
 841
 842 &mipi_dsi {
 843         status = "okay";
 844         #address-cells = <1>;
 845         #size-cells = <0>;
 846
 847         panel@0 {
 848                 compatible = "rocktech,jh057n00900";
 849                 reg = <0>;
 850                 backlight = <&backlight_dsi>;
 851                 reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
 852                 iovcc-supply = <&reg_1v8_p>;
 853                 vcc-supply = <&reg_2v8_p>;
 854                 port {
 855                         panel_in: endpoint {
 856                                 remote-endpoint = <&mipi_dsi_out>;
 857                         };
 858                 };
 859         };
 860
 861         ports {
 862                 port@1 {
 863                         reg = <1>;
 864                         mipi_dsi_out: endpoint {
 865                                 remote-endpoint = <&panel_in>;
 866                         };
 867                 };
 868         };
 869 };
 870
 871 &pgc_gpu {
 872         power-supply = <&buck3_reg>;
 873 };
 874
 875 &pgc_vpu {
 876         power-supply = <&buck4_reg>;
 877 };
 878
 879 &pwm1 {
 880         pinctrl-names = "default";
 881         pinctrl-0 = <&pinctrl_bl>;
 882         status = "okay";
 883 };
 884
 885 &snvs_pwrkey {
 886         status = "okay";
 887 };
 888
 889 &sai2 {
 890         pinctrl-names = "default";
 891         pinctrl-0 = <&pinctrl_sai2>;
 892         assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
 893         assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
 894         assigned-clock-rates = <24576000>;
 895         status = "okay";
 896 };
 897
 898 &sai6 {
 899         pinctrl-names = "default";
 900         pinctrl-0 = <&pinctrl_sai6>;
 901         assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
 902         assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
 903         assigned-clock-rates = <24576000>;
 904         fsl,sai-synchronous-rx;
 905         status = "okay";
 906 };
 907
 908 &uart1 { /* console */
 909         pinctrl-names = "default";
 910         pinctrl-0 = <&pinctrl_uart1>;
 911         status = "okay";
 912 };
 913
 914 &uart3 { /* GNSS */
 915         pinctrl-names = "default";
 916         pinctrl-0 = <&pinctrl_uart3>;
 917         status = "okay";
 918 };
 919
 920 &uart4 { /* BT */
 921         pinctrl-names = "default";
 922         pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>;
 923         uart-has-rtscts;
 924         status = "okay";
 925 };
 926
 927 &usb3_phy0 {
 928         vbus-supply = <&reg_5v_p>;
 929         status = "okay";
 930 };
 931
 932 &usb3_phy1 {
 933         vbus-supply = <&reg_5v_p>;
 934         status = "okay";
 935 };
 936
 937 &usb_dwc3_0 {
 938         #address-cells = <1>;
 939         #size-cells = <0>;
 940         dr_mode = "otg";
 941         status = "okay";
 942
 943         port@0 {
 944                 reg = <0>;
 945
 946                 typec_hs: endpoint {
 947                         remote-endpoint = <&usb_con_hs>;
 948                 };
 949         };
 950
 951         port@1 {
 952                 reg = <1>;
 953
 954                 typec_ss: endpoint {
 955                         remote-endpoint = <&usb_con_ss>;
 956                 };
 957         };
 958 };
 959
 960 &usb_dwc3_1 {
 961         dr_mode = "host";
 962         status = "okay";
 963 };
 964
 965 &usdhc1 {
 966         assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
 967         assigned-clock-rates = <400000000>;
 968         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 969         pinctrl-0 = <&pinctrl_usdhc1>;
 970         pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 971         pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 972         bus-width = <8>;
 973         non-removable;
 974         status = "okay";
 975 };
 976
 977 &usdhc2 {
 978         assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
 979         assigned-clock-rates = <200000000>;
 980         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 981         pinctrl-0 = <&pinctrl_usdhc2>;
 982         pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
 983         pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 984         bus-width = <4>;
 985         vmmc-supply = <&reg_usdhc2_vmmc>;
 986         power-supply = <&wifi_pwr_en>;
 987         broken-cd;
 988         disable-wp;
 989         cap-sdio-irq;
 990         keep-power-in-suspend;
 991         wakeup-source;
 992         status = "okay";
 993 };
 994
 995 &wdog1 {
 996         pinctrl-names = "default";
 997         pinctrl-0 = <&pinctrl_wdog>;
 998         fsl,ext-reset-output;
 999         status = "okay";
1000 };