arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright 2020 Gateworks Corporation
   4  */
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/leds/common.h>
   8 #include <dt-bindings/phy/phy-imx8-pcie.h>
   9
  10 / {
  11         aliases {
  12                 ethernet1 = &eth1;
  13                 usb0 = &usbotg1;
  14                 usb1 = &usbotg2;
  15         };
  16
  17         led-controller {
  18                 compatible = "gpio-leds";
  19                 pinctrl-names = "default";
  20                 pinctrl-0 = <&pinctrl_gpio_leds>;
  21
  22                 led-0 {
  23                         function = LED_FUNCTION_STATUS;
  24                         color = <LED_COLOR_ID_GREEN>;
  25                         gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
  26                         default-state = "on";
  27                         linux,default-trigger = "heartbeat";
  28                 };
  29
  30                 led-1 {
  31                         function = LED_FUNCTION_STATUS;
  32                         color = <LED_COLOR_ID_RED>;
  33                         gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
  34                         default-state = "off";
  35                 };
  36         };
  37
  38         pcie0_refclk: pcie0-refclk {
  39                 compatible = "fixed-clock";
  40                 #clock-cells = <0>;
  41                 clock-frequency = <100000000>;
  42         };
  43
  44         pps {
  45                 compatible = "pps-gpio";
  46                 pinctrl-names = "default";
  47                 pinctrl-0 = <&pinctrl_pps>;
  48                 gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
  49                 status = "okay";
  50         };
  51
  52         reg_1p8v: regulator-1p8v {
  53                 compatible = "regulator-fixed";
  54                 regulator-name = "1P8V";
  55                 regulator-min-microvolt = <1800000>;
  56                 regulator-max-microvolt = <1800000>;
  57                 regulator-always-on;
  58         };
  59
  60         reg_3p3v: regulator-3p3v {
  61                 compatible = "regulator-fixed";
  62                 regulator-name = "3P3V";
  63                 regulator-min-microvolt = <3300000>;
  64                 regulator-max-microvolt = <3300000>;
  65                 regulator-always-on;
  66         };
  67
  68         reg_usb_otg1_vbus: regulator-usb-otg1 {
  69                 pinctrl-names = "default";
  70                 pinctrl-0 = <&pinctrl_reg_usb1_en>;
  71                 compatible = "regulator-fixed";
  72                 regulator-name = "usb_otg1_vbus";
  73                 gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
  74                 enable-active-high;
  75                 regulator-min-microvolt = <5000000>;
  76                 regulator-max-microvolt = <5000000>;
  77         };
  78
  79         reg_usb_otg2_vbus: regulator-usb-otg2 {
  80                 pinctrl-names = "default";
  81                 pinctrl-0 = <&pinctrl_reg_usb2_en>;
  82                 compatible = "regulator-fixed";
  83                 regulator-name = "usb_otg2_vbus";
  84                 gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
  85                 enable-active-high;
  86                 regulator-min-microvolt = <5000000>;
  87                 regulator-max-microvolt = <5000000>;
  88         };
  89
  90         reg_wifi_en: regulator-wifi-en {
  91                 pinctrl-names = "default";
  92                 pinctrl-0 = <&pinctrl_reg_wl>;
  93                 compatible = "regulator-fixed";
  94                 regulator-name = "wl";
  95                 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  96                 startup-delay-us = <100>;
  97                 enable-active-high;
  98                 regulator-min-microvolt = <3300000>;
  99                 regulator-max-microvolt = <3300000>;
 100         };
 101 };
 102
 103 /* off-board header */
 104 &ecspi2 {
 105         pinctrl-names = "default";
 106         pinctrl-0 = <&pinctrl_spi2>;
 107         cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 108         status = "okay";
 109 };
 110
 111 &gpio1 {
 112         gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
 113                 "", "", "pci_usb_sel", "dio0",
 114                 "", "dio1", "", "", "", "", "", "",
 115                 "", "", "", "", "", "", "", "",
 116                 "", "", "", "", "", "", "", "";
 117 };
 118
 119 &gpio4 {
 120         gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
 121                 "mipi_gpio1", "", "", "pci_wdis#",
 122                 "", "", "", "", "", "", "", "",
 123                 "", "", "", "", "", "", "", "",
 124                 "", "", "", "", "", "", "", "";
 125 };
 126
 127 &i2c2 {
 128         clock-frequency = <400000>;
 129         pinctrl-names = "default";
 130         pinctrl-0 = <&pinctrl_i2c2>;
 131         status = "okay";
 132
 133         accelerometer@19 {
 134                 pinctrl-names = "default";
 135                 pinctrl-0 = <&pinctrl_accel>;
 136                 compatible = "st,lis2de12";
 137                 reg = <0x19>;
 138                 st,drdy-int-pin = <1>;
 139                 interrupt-parent = <&gpio4>;
 140                 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 141                 interrupt-names = "INT1";
 142         };
 143 };
 144
 145 /* off-board header */
 146 &i2c3 {
 147         clock-frequency = <400000>;
 148         pinctrl-names = "default";
 149         pinctrl-0 = <&pinctrl_i2c3>;
 150         status = "okay";
 151 };
 152
 153 &pcie_phy {
 154         fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 155         fsl,clkreq-unsupported;
 156         clocks = <&pcie0_refclk>;
 157         status = "okay";
 158 };
 159
 160 &pcie0 {
 161         pinctrl-names = "default";
 162         pinctrl-0 = <&pinctrl_pcie0>;
 163         reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
 164         clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
 165                  <&pcie0_refclk>;
 166         clock-names = "pcie", "pcie_aux", "pcie_bus";
 167         assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 168                           <&clk IMX8MM_CLK_PCIE1_CTRL>;
 169         assigned-clock-rates = <10000000>, <250000000>;
 170         assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
 171                                  <&clk IMX8MM_SYS_PLL2_250M>;
 172         status = "okay";
 173
 174         pcie@0,0 {
 175                 reg = <0x0000 0 0 0 0>;
 176                 #address-cells = <1>;
 177                 #size-cells = <0>;
 178
 179                 pcie@1,0 {
 180                         reg = <0x0000 0 0 0 0>;
 181                         #address-cells = <1>;
 182                         #size-cells = <0>;
 183
 184                         pcie@2,4 {
 185                                 reg = <0x2000 0 0 0 0>;
 186                                 #address-cells = <1>;
 187                                 #size-cells = <0>;
 188
 189                                 eth1: pcie@6,0 {
 190                                         reg = <0x0000 0 0 0 0>;
 191                                         #address-cells = <1>;
 192                                         #size-cells = <0>;
 193
 194                                         local-mac-address = [00 00 00 00 00 00];
 195                                 };
 196                         };
 197                 };
 198         };
 199 };
 200
 201 /* off-board header */
 202 &sai3 {
 203         pinctrl-names = "default";
 204         pinctrl-0 = <&pinctrl_sai3>;
 205         assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
 206         assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
 207         assigned-clock-rates = <24576000>;
 208         status = "okay";
 209 };
 210
 211 /* GPS */
 212 &uart1 {
 213         pinctrl-names = "default";
 214         pinctrl-0 = <&pinctrl_uart1>;
 215         status = "okay";
 216 };
 217
 218 /* bluetooth HCI */
 219 &uart3 {
 220         pinctrl-names = "default";
 221         pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
 222         cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 223         rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 224         status = "okay";
 225
 226         bluetooth {
 227                 compatible = "brcm,bcm4330-bt";
 228                 shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 229         };
 230 };
 231
 232 /* RS232 */
 233 &uart4 {
 234         pinctrl-names = "default";
 235         pinctrl-0 = <&pinctrl_uart4>;
 236         status = "okay";
 237 };
 238
 239 &usbotg1 {
 240         dr_mode = "otg";
 241         vbus-supply = <&reg_usb_otg1_vbus>;
 242         status = "okay";
 243 };
 244
 245 &usbotg2 {
 246         dr_mode = "host";
 247         vbus-supply = <&reg_usb_otg2_vbus>;
 248         status = "okay";
 249 };
 250
 251 /* SDIO WiFi */
 252 &usdhc1 {
 253         pinctrl-names = "default";
 254         pinctrl-0 = <&pinctrl_usdhc1>;
 255         bus-width = <4>;
 256         non-removable;
 257         vmmc-supply = <&reg_wifi_en>;
 258         status = "okay";
 259 };
 260
 261 /* microSD */
 262 &usdhc2 {
 263         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 264         pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 265         pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
 266         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 267         cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 268         bus-width = <4>;
 269         vmmc-supply = <&reg_3p3v>;
 270         status = "okay";
 271 };
 272
 273 &iomuxc {
 274         pinctrl-names = "default";
 275         pinctrl-0 = <&pinctrl_hog>;
 276
 277         pinctrl_hog: hoggrp {
 278                 fsl,pins = <
 279                         MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3         0x40000041 /* PLUG_TEST */
 280                         MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6       0x40000041 /* PCI_USBSEL */
 281                         MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7        0x40000041 /* PCIE_WDIS# */
 282                         MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7       0x40000041 /* DIO0 */
 283                         MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9       0x40000041 /* DIO1 */
 284                         MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0       0x40000104 /* RS485_TERM */
 285                         MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0        0x40000104 /* RS485 */
 286                         MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2        0x40000104 /* RS485_HALF */
 287                 >;
 288         };
 289
 290         pinctrl_accel: accelgrp {
 291                 fsl,pins = <
 292                         MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5        0x159
 293                 >;
 294         };
 295
 296         pinctrl_bten: btengrp {
 297                 fsl,pins = <
 298                         MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3       0x41
 299                 >;
 300         };
 301
 302         pinctrl_gpio_leds: gpioledgrp {
 303                 fsl,pins = <
 304                         MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5    0x19
 305                         MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4         0x19
 306                 >;
 307         };
 308
 309         pinctrl_i2c3: i2c3grp {
 310                 fsl,pins = <
 311                         MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL          0x400001c3
 312                         MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA          0x400001c3
 313                 >;
 314         };
 315
 316         pinctrl_pcie0: pcie0grp {
 317                 fsl,pins = <
 318                         MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6        0x41
 319                 >;
 320         };
 321
 322         pinctrl_pps: ppsgrp {
 323                 fsl,pins = <
 324                         MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15      0x41
 325                 >;
 326         };
 327
 328         pinctrl_reg_wl: regwlgrp {
 329                 fsl,pins = <
 330                         MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x41
 331                 >;
 332         };
 333
 334         pinctrl_reg_usb1_en: regusb1grp {
 335                 fsl,pins = <
 336                         MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12      0x41
 337                         MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC     0x41
 338                 >;
 339         };
 340
 341         pinctrl_reg_usb2_en: regusb2grp {
 342                 fsl,pins = <
 343                         MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8       0x41
 344                 >;
 345         };
 346
 347         pinctrl_sai3: sai3grp {
 348                 fsl,pins = <
 349                         MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
 350                         MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
 351                         MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
 352                         MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
 353                         MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0     0xd6
 354                 >;
 355         };
 356
 357         pinctrl_spi2: spi2grp {
 358                 fsl,pins = <
 359                         MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK    0xd6
 360                         MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI    0xd6
 361                         MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK    0xd6
 362                         MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13      0xd6
 363                 >;
 364         };
 365
 366         pinctrl_uart1: uart1grp {
 367                 fsl,pins = <
 368                         MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX     0x140
 369                         MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX     0x140
 370                 >;
 371         };
 372
 373         pinctrl_uart3: uart3grp {
 374                 fsl,pins = <
 375                         MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX     0x140
 376                         MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX     0x140
 377                         MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8      0x140
 378                         MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9       0x140
 379                 >;
 380         };
 381
 382         pinctrl_uart4: uart4grp {
 383                 fsl,pins = <
 384                         MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX     0x140
 385                         MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX     0x140
 386                 >;
 387         };
 388
 389         pinctrl_usdhc1: usdhc1grp {
 390                 fsl,pins = <
 391                         MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         0x190
 392                         MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         0x1d0
 393                         MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0     0x1d0
 394                         MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1     0x1d0
 395                         MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2     0x1d0
 396                         MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3     0x1d0
 397                 >;
 398         };
 399
 400         pinctrl_usdhc2: usdhc2grp {
 401                 fsl,pins = <
 402                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x190
 403                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d0
 404                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d0
 405                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d0
 406                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d0
 407                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d0
 408                 >;
 409         };
 410
 411         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 412                 fsl,pins = <
 413                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x194
 414                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d4
 415                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d4
 416                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d4
 417                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d4
 418                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d4
 419                 >;
 420         };
 421
 422         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 423                 fsl,pins = <
 424                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x196
 425                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d6
 426                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d6
 427                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d6
 428                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d6
 429                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d6
 430                 >;
 431         };
 432
 433         pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 434                 fsl,pins = <
 435                         MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12        0x1c4
 436                         MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0
 437                         MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
 438                 >;
 439         };
 440 };