arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
   4  *
   5  * Copyright 2016 Freescale Semiconductor, Inc.
   6  *
   7  * Mingkai Hu <mingkai.hu@nxp.com>
   8  */
   9
  10 /dts-v1/;
  11
  12 #include "fsl-ls1046a.dtsi"
  13
  14 / {
  15         model = "LS1046A RDB Board";
  16         compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
  17
  18         aliases {
  19                 serial0 = &duart0;
  20                 serial1 = &duart1;
  21                 serial2 = &duart2;
  22                 serial3 = &duart3;
  23         };
  24
  25         chosen {
  26                 stdout-path = "serial0:115200n8";
  27         };
  28 };
  29
  30 &duart0 {
  31         status = "okay";
  32 };
  33
  34 &duart1 {
  35         status = "okay";
  36 };
  37
  38 &esdhc {
  39         mmc-hs200-1_8v;
  40         sd-uhs-sdr104;
  41         sd-uhs-sdr50;
  42         sd-uhs-sdr25;
  43         sd-uhs-sdr12;
  44 };
  45
  46 &i2c0 {
  47         status = "okay";
  48
  49         ina220@40 {
  50                 compatible = "ti,ina220";
  51                 reg = <0x40>;
  52                 shunt-resistor = <1000>;
  53         };
  54
  55         temp-sensor@4c {
  56                 compatible = "adi,adt7461";
  57                 reg = <0x4c>;
  58         };
  59
  60         eeprom@52 {
  61                 compatible = "atmel,24c512";
  62                 reg = <0x52>;
  63         };
  64
  65         eeprom@53 {
  66                 compatible = "atmel,24c512";
  67                 reg = <0x53>;
  68         };
  69 };
  70
  71 &i2c3 {
  72         status = "okay";
  73
  74         rtc@51 {
  75                 compatible = "nxp,pcf2129";
  76                 reg = <0x51>;
  77         };
  78 };
  79
  80 &ifc {
  81         #address-cells = <2>;
  82         #size-cells = <1>;
  83         /* NAND Flashe and CPLD on board */
  84         ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
  85                   0x2 0x0 0x0 0x7fb00000 0x00000100>;
  86         status = "okay";
  87
  88         nand@0,0 {
  89                 compatible = "fsl,ifc-nand";
  90                 #address-cells = <1>;
  91                 #size-cells = <1>;
  92                 reg = <0x0 0x0 0x10000>;
  93         };
  94
  95         cpld: board-control@2,0 {
  96                 compatible = "fsl,ls1046ardb-cpld";
  97                 reg = <0x2 0x0 0x0000100>;
  98         };
  99 };
 100
 101 &qspi {
 102         status = "okay";
 103
 104         s25fs512s0: flash@0 {
 105                 compatible = "jedec,spi-nor";
 106                 #address-cells = <1>;
 107                 #size-cells = <1>;
 108                 spi-max-frequency = <50000000>;
 109                 spi-rx-bus-width = <4>;
 110                 spi-tx-bus-width = <1>;
 111                 reg = <0>;
 112         };
 113
 114         s25fs512s1: flash@1 {
 115                 compatible = "jedec,spi-nor";
 116                 #address-cells = <1>;
 117                 #size-cells = <1>;
 118                 spi-max-frequency = <50000000>;
 119                 spi-rx-bus-width = <4>;
 120                 spi-tx-bus-width = <1>;
 121                 reg = <1>;
 122         };
 123 };
 124
 125 &usb1 {
 126         dr_mode = "otg";
 127 };
 128
 129 #include "fsl-ls1046-post.dtsi"
 130
 131 &fman0 {
 132         ethernet@e4000 {
 133                 phy-handle = <&rgmii_phy1>;
 134                 phy-connection-type = "rgmii-id";
 135         };
 136
 137         ethernet@e6000 {
 138                 phy-handle = <&rgmii_phy2>;
 139                 phy-connection-type = "rgmii-id";
 140         };
 141
 142         ethernet@e8000 {
 143                 phy-handle = <&sgmii_phy1>;
 144                 phy-connection-type = "sgmii";
 145         };
 146
 147         ethernet@ea000 {
 148                 phy-handle = <&sgmii_phy2>;
 149                 phy-connection-type = "sgmii";
 150         };
 151
 152         ethernet@f0000 { /* 10GEC1 */
 153                 phy-handle = <&aqr106_phy>;
 154                 phy-connection-type = "xgmii";
 155         };
 156
 157         ethernet@f2000 { /* 10GEC2 */
 158                 fixed-link = <0 1 1000 0 0>;
 159                 phy-connection-type = "xgmii";
 160         };
 161
 162         mdio@fc000 {
 163                 rgmii_phy1: ethernet-phy@1 {
 164                         reg = <0x1>;
 165                 };
 166
 167                 rgmii_phy2: ethernet-phy@2 {
 168                         reg = <0x2>;
 169                 };
 170
 171                 sgmii_phy1: ethernet-phy@3 {
 172                         reg = <0x3>;
 173                 };
 174
 175                 sgmii_phy2: ethernet-phy@4 {
 176                         reg = <0x4>;
 177                 };
 178         };
 179
 180         mdio@fd000 {
 181                 aqr106_phy: ethernet-phy@0 {
 182                         compatible = "ethernet-phy-ieee802.3-c45";
 183                         interrupts = <0 131 4>;
 184                         reg = <0x0>;
 185                 };
 186         };
 187 };