1 // SPDX-License-Identifier: GPL-2.0
3 * ARM Ltd. Versatile Express
5 * LogicTile Express 20MG
8 * Cortex-A53 (2 cores) Soft Macrocell Model
15 #include <dt-bindings/interrupt-controller/arm-gic.h>
16 #include "vexpress-v2m-rs1.dtsi"
19 model = "V2F-1XV7 Cortex-A53x2 SMM";
21 arm,vexpress,site = <0xf>;
22 compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress";
23 interrupt-parent = <&gic>;
28 stdout-path = "serial0:38400n8";
32 serial0 = &v2m_serial0;
33 serial1 = &v2m_serial1;
34 serial2 = &v2m_serial2;
35 serial3 = &v2m_serial3;
46 compatible = "arm,cortex-a53";
48 next-level-cache = <&L2_0>;
53 compatible = "arm,cortex-a53";
55 next-level-cache = <&L2_0>;
64 device_type = "memory";
65 reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
73 /* Chipselect 2 is physically at 0x18000000 */
75 /* 8 MB of designated video RAM */
76 compatible = "shared-dma-pool";
77 reg = <0 0x18000000 0 0x00800000>;
82 gic: interrupt-controller@2c001000 {
83 compatible = "arm,gic-400";
84 #interrupt-cells = <3>;
87 reg = <0 0x2c001000 0 0x1000>,
88 <0 0x2c002000 0 0x2000>,
89 <0 0x2c004000 0 0x2000>,
90 <0 0x2c006000 0 0x2000>;
91 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
95 compatible = "arm,armv8-timer";
96 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
97 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
98 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
99 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
103 compatible = "arm,armv8-pmuv3";
104 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
105 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
109 compatible = "arm,vexpress,config-bus";
110 arm,vexpress,config-bridge = <&v2m_sysreg>;
114 compatible = "arm,vexpress-osc";
115 arm,vexpress-sysreg,func = <1 4>;
116 freq-range = <40000000 40000000>;
118 clock-output-names = "smclk";
122 /* VIO to expansion board above */
123 compatible = "arm,vexpress-volt";
124 arm,vexpress-sysreg,func = <2 0>;
125 regulator-name = "VIO_UP";
126 regulator-min-microvolt = <800000>;
127 regulator-max-microvolt = <1800000>;
132 /* 12V from power connector J6 */
133 compatible = "arm,vexpress-volt";
134 arm,vexpress-sysreg,func = <2 1>;
135 regulator-name = "12";
140 /* FPGA temperature */
141 compatible = "arm,vexpress-temp";
142 arm,vexpress-sysreg,func = <4 0>;
148 ranges = <0x8000000 0 0x8000000 0x18000000>;