arch/arm/mach-s3c/s3c64xx.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 //
   3 // Copyright (c) 2011 Samsung Electronics Co., Ltd.
   4 //              http://www.samsung.com
   5 //
   6 // Copyright 2008 Openmoko, Inc.
   7 // Copyright 2008 Simtec Electronics
   8 //      Ben Dooks <ben@simtec.co.uk>
   9 //      http://armlinux.simtec.co.uk/
  10 //
  11 // Common Codes for S3C64XX machines
  12
  13 /*
  14  * NOTE: Code in this file is not used when booting with Device Tree support.
  15  */
  16
  17 #include <linux/kernel.h>
  18 #include <linux/init.h>
  19 #include <linux/module.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/ioport.h>
  22 #include <linux/serial_core.h>
  23 #include <linux/serial_s3c.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/reboot.h>
  26 #include <linux/io.h>
  27 #include <linux/clk/samsung.h>
  28 #include <linux/dma-mapping.h>
  29 #include <linux/irq.h>
  30 #include <linux/gpio.h>
  31 #include <linux/irqchip/arm-vic.h>
  32 #include <clocksource/samsung_pwm.h>
  33
  34 #include <asm/mach/arch.h>
  35 #include <asm/mach/map.h>
  36 #include <asm/system_misc.h>
  37
  38 #include "map.h"
  39 #include <mach/irqs.h>
  40 #include "regs-gpio.h"
  41 #include "gpio-samsung.h"
  42
  43 #include "cpu.h"
  44 #include "devs.h"
  45 #include "pm.h"
  46 #include "gpio-cfg.h"
  47 #include "pwm-core.h"
  48 #include "regs-irqtype.h"
  49 #include "s3c64xx.h"
  50 #include "irq-uart-s3c64xx.h"
  51
  52 /* External clock frequency */
  53 static unsigned long xtal_f __ro_after_init = 12000000;
  54 static unsigned long xusbxti_f __ro_after_init = 48000000;
  55
  56 void __init s3c64xx_set_xtal_freq(unsigned long freq)
  57 {
  58         xtal_f = freq;
  59 }
  60
  61 void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
  62 {
  63         xusbxti_f = freq;
  64 }
  65
  66 /* uart registration process */
  67
  68 static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
  69 {
  70         s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
  71 }
  72
  73 /* table of supported CPUs */
  74
  75 static const char name_s3c6400[] = "S3C6400";
  76 static const char name_s3c6410[] = "S3C6410";
  77
  78 static struct cpu_table cpu_ids[] __initdata = {
  79         {
  80                 .idcode         = S3C6400_CPU_ID,
  81                 .idmask         = S3C64XX_CPU_MASK,
  82                 .map_io         = s3c6400_map_io,
  83                 .init_uarts     = s3c64xx_init_uarts,
  84                 .init           = s3c6400_init,
  85                 .name           = name_s3c6400,
  86         }, {
  87                 .idcode         = S3C6410_CPU_ID,
  88                 .idmask         = S3C64XX_CPU_MASK,
  89                 .map_io         = s3c6410_map_io,
  90                 .init_uarts     = s3c64xx_init_uarts,
  91                 .init           = s3c6410_init,
  92                 .name           = name_s3c6410,
  93         },
  94 };
  95
  96 /* minimal IO mapping */
  97
  98 /*
  99  * note, for the boot process to work we have to keep the UART
 100  * virtual address aligned to an 1MiB boundary for the L1
 101  * mapping the head code makes. We keep the UART virtual address
 102  * aligned and add in the offset when we load the value here.
 103  */
 104 #define UART_OFFS (S3C_PA_UART & 0xfffff)
 105
 106 static struct map_desc s3c_iodesc[] __initdata = {
 107         {
 108                 .virtual        = (unsigned long)S3C_VA_SYS,
 109                 .pfn            = __phys_to_pfn(S3C64XX_PA_SYSCON),
 110                 .length         = SZ_4K,
 111                 .type           = MT_DEVICE,
 112         }, {
 113                 .virtual        = (unsigned long)S3C_VA_MEM,
 114                 .pfn            = __phys_to_pfn(S3C64XX_PA_SROM),
 115                 .length         = SZ_4K,
 116                 .type           = MT_DEVICE,
 117         }, {
 118                 .virtual        = (unsigned long)(S3C_VA_UART + UART_OFFS),
 119                 .pfn            = __phys_to_pfn(S3C_PA_UART),
 120                 .length         = SZ_4K,
 121                 .type           = MT_DEVICE,
 122         }, {
 123                 .virtual        = (unsigned long)VA_VIC0,
 124                 .pfn            = __phys_to_pfn(S3C64XX_PA_VIC0),
 125                 .length         = SZ_16K,
 126                 .type           = MT_DEVICE,
 127         }, {
 128                 .virtual        = (unsigned long)VA_VIC1,
 129                 .pfn            = __phys_to_pfn(S3C64XX_PA_VIC1),
 130                 .length         = SZ_16K,
 131                 .type           = MT_DEVICE,
 132         }, {
 133                 .virtual        = (unsigned long)S3C_VA_TIMER,
 134                 .pfn            = __phys_to_pfn(S3C_PA_TIMER),
 135                 .length         = SZ_16K,
 136                 .type           = MT_DEVICE,
 137         }, {
 138                 .virtual        = (unsigned long)S3C64XX_VA_GPIO,
 139                 .pfn            = __phys_to_pfn(S3C64XX_PA_GPIO),
 140                 .length         = SZ_4K,
 141                 .type           = MT_DEVICE,
 142         }, {
 143                 .virtual        = (unsigned long)S3C64XX_VA_MODEM,
 144                 .pfn            = __phys_to_pfn(S3C64XX_PA_MODEM),
 145                 .length         = SZ_4K,
 146                 .type           = MT_DEVICE,
 147         }, {
 148                 .virtual        = (unsigned long)S3C_VA_WATCHDOG,
 149                 .pfn            = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
 150                 .length         = SZ_4K,
 151                 .type           = MT_DEVICE,
 152         }, {
 153                 .virtual        = (unsigned long)S3C_VA_USB_HSPHY,
 154                 .pfn            = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
 155                 .length         = SZ_1K,
 156                 .type           = MT_DEVICE,
 157         },
 158 };
 159
 160 static struct bus_type s3c64xx_subsys = {
 161         .name           = "s3c64xx-core",
 162         .dev_name       = "s3c64xx-core",
 163 };
 164
 165 static struct device s3c64xx_dev = {
 166         .bus    = &s3c64xx_subsys,
 167 };
 168
 169 static struct samsung_pwm_variant s3c64xx_pwm_variant = {
 170         .bits           = 32,
 171         .div_base       = 0,
 172         .has_tint_cstat = true,
 173         .tclk_mask      = (1 << 7) | (1 << 6) | (1 << 5),
 174 };
 175
 176 void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
 177 {
 178         s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
 179         s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
 180 }
 181
 182 void __init s3c64xx_timer_init(void)
 183 {
 184         unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
 185                 IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
 186                 IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
 187         };
 188
 189         samsung_pwm_clocksource_init(S3C_VA_TIMER,
 190                                         timer_irqs, &s3c64xx_pwm_variant);
 191 }
 192
 193 /* read cpu identification code */
 194
 195 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 196 {
 197         /* initialise the io descriptors we need for initialisation */
 198         iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 199         iotable_init(mach_desc, size);
 200
 201         /* detect cpu id */
 202         s3c64xx_init_cpu();
 203
 204         s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 205
 206         samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
 207 }
 208
 209 static __init int s3c64xx_dev_init(void)
 210 {
 211         /* Not applicable when using DT. */
 212         if (of_have_populated_dt() || !soc_is_s3c64xx())
 213                 return 0;
 214
 215         subsys_system_register(&s3c64xx_subsys, NULL);
 216         return device_register(&s3c64xx_dev);
 217 }
 218 core_initcall(s3c64xx_dev_init);
 219
 220 /*
 221  * setup the sources the vic should advertise resume
 222  * for, even though it is not doing the wake
 223  * (set_irq_wake needs to be valid)
 224  */
 225 #define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
 226 #define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
 227                          1 << (IRQ_PENDN - IRQ_VIC1_BASE) |     \
 228                          1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) |    \
 229                          1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) |    \
 230                          1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
 231
 232 void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 233 {
 234         s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
 235
 236         printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
 237
 238         /* initialise the pair of VICs */
 239         vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
 240         vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
 241 }
 242
 243 #define eint_offset(irq)        ((irq) - IRQ_EINT(0))
 244 #define eint_irq_to_bit(irq)    ((u32)(1 << eint_offset(irq)))
 245
 246 static inline void s3c_irq_eint_mask(struct irq_data *data)
 247 {
 248         u32 mask;
 249
 250         mask = __raw_readl(S3C64XX_EINT0MASK);
 251         mask |= (u32)data->chip_data;
 252         __raw_writel(mask, S3C64XX_EINT0MASK);
 253 }
 254
 255 static void s3c_irq_eint_unmask(struct irq_data *data)
 256 {
 257         u32 mask;
 258
 259         mask = __raw_readl(S3C64XX_EINT0MASK);
 260         mask &= ~((u32)data->chip_data);
 261         __raw_writel(mask, S3C64XX_EINT0MASK);
 262 }
 263
 264 static inline void s3c_irq_eint_ack(struct irq_data *data)
 265 {
 266         __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
 267 }
 268
 269 static void s3c_irq_eint_maskack(struct irq_data *data)
 270 {
 271         /* compiler should in-line these */
 272         s3c_irq_eint_mask(data);
 273         s3c_irq_eint_ack(data);
 274 }
 275
 276 static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
 277 {
 278         int offs = eint_offset(data->irq);
 279         int pin, pin_val;
 280         int shift;
 281         u32 ctrl, mask;
 282         u32 newvalue = 0;
 283         void __iomem *reg;
 284
 285         if (offs > 27)
 286                 return -EINVAL;
 287
 288         if (offs <= 15)
 289                 reg = S3C64XX_EINT0CON0;
 290         else
 291                 reg = S3C64XX_EINT0CON1;
 292
 293         switch (type) {
 294         case IRQ_TYPE_NONE:
 295                 printk(KERN_WARNING "No edge setting!\n");
 296                 break;
 297
 298         case IRQ_TYPE_EDGE_RISING:
 299                 newvalue = S3C2410_EXTINT_RISEEDGE;
 300                 break;
 301
 302         case IRQ_TYPE_EDGE_FALLING:
 303                 newvalue = S3C2410_EXTINT_FALLEDGE;
 304                 break;
 305
 306         case IRQ_TYPE_EDGE_BOTH:
 307                 newvalue = S3C2410_EXTINT_BOTHEDGE;
 308                 break;
 309
 310         case IRQ_TYPE_LEVEL_LOW:
 311                 newvalue = S3C2410_EXTINT_LOWLEV;
 312                 break;
 313
 314         case IRQ_TYPE_LEVEL_HIGH:
 315                 newvalue = S3C2410_EXTINT_HILEV;
 316                 break;
 317
 318         default:
 319                 printk(KERN_ERR "No such irq type %d", type);
 320                 return -1;
 321         }
 322
 323         if (offs <= 15)
 324                 shift = (offs / 2) * 4;
 325         else
 326                 shift = ((offs - 16) / 2) * 4;
 327         mask = 0x7 << shift;
 328
 329         ctrl = __raw_readl(reg);
 330         ctrl &= ~mask;
 331         ctrl |= newvalue << shift;
 332         __raw_writel(ctrl, reg);
 333
 334         /* set the GPIO pin appropriately */
 335
 336         if (offs < 16) {
 337                 pin = S3C64XX_GPN(offs);
 338                 pin_val = S3C_GPIO_SFN(2);
 339         } else if (offs < 23) {
 340                 pin = S3C64XX_GPL(offs + 8 - 16);
 341                 pin_val = S3C_GPIO_SFN(3);
 342         } else {
 343                 pin = S3C64XX_GPM(offs - 23);
 344                 pin_val = S3C_GPIO_SFN(3);
 345         }
 346
 347         s3c_gpio_cfgpin(pin, pin_val);
 348
 349         return 0;
 350 }
 351
 352 static struct irq_chip s3c_irq_eint = {
 353         .name           = "s3c-eint",
 354         .irq_mask       = s3c_irq_eint_mask,
 355         .irq_unmask     = s3c_irq_eint_unmask,
 356         .irq_mask_ack   = s3c_irq_eint_maskack,
 357         .irq_ack        = s3c_irq_eint_ack,
 358         .irq_set_type   = s3c_irq_eint_set_type,
 359         .irq_set_wake   = s3c_irqext_wake,
 360 };
 361
 362 /* s3c_irq_demux_eint
 363  *
 364  * This function demuxes the IRQ from the group0 external interrupts,
 365  * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
 366  * the specific handlers s3c_irq_demux_eintX_Y.
 367  */
 368 static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
 369 {
 370         u32 status = __raw_readl(S3C64XX_EINT0PEND);
 371         u32 mask = __raw_readl(S3C64XX_EINT0MASK);
 372         unsigned int irq;
 373
 374         status &= ~mask;
 375         status >>= start;
 376         status &= (1 << (end - start + 1)) - 1;
 377
 378         for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
 379                 if (status & 1)
 380                         generic_handle_irq(irq);
 381
 382                 status >>= 1;
 383         }
 384 }
 385
 386 static void s3c_irq_demux_eint0_3(struct irq_desc *desc)
 387 {
 388         s3c_irq_demux_eint(0, 3);
 389 }
 390
 391 static void s3c_irq_demux_eint4_11(struct irq_desc *desc)
 392 {
 393         s3c_irq_demux_eint(4, 11);
 394 }
 395
 396 static void s3c_irq_demux_eint12_19(struct irq_desc *desc)
 397 {
 398         s3c_irq_demux_eint(12, 19);
 399 }
 400
 401 static void s3c_irq_demux_eint20_27(struct irq_desc *desc)
 402 {
 403         s3c_irq_demux_eint(20, 27);
 404 }
 405
 406 static int __init s3c64xx_init_irq_eint(void)
 407 {
 408         int irq;
 409
 410         /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
 411         if (of_have_populated_dt() || !soc_is_s3c64xx())
 412                 return -ENODEV;
 413
 414         for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
 415                 irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
 416                 irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
 417                 irq_clear_status_flags(irq, IRQ_NOREQUEST);
 418         }
 419
 420         irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
 421         irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
 422         irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
 423         irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
 424
 425         return 0;
 426 }
 427 arch_initcall(s3c64xx_init_irq_eint);