Merge tag 'fs.idmapped.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/braune...
[linux-2.6-microblaze.git] / arch / arm / mach-pxa / colibri-pxa3xx.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  arch/arm/mach-pxa/colibri-pxa3xx.c
4  *
5  *  Common functions for all Toradex PXA3xx modules
6  *
7  *  Daniel Mack <daniel@caiaq.de>
8  */
9
10 #include <linux/init.h>
11 #include <linux/kernel.h>
12 #include <linux/platform_device.h>
13 #include <linux/gpio.h>
14 #include <linux/etherdevice.h>
15 #include <asm/mach-types.h>
16 #include <mach/hardware.h>
17 #include <linux/sizes.h>
18 #include <asm/system_info.h>
19 #include <asm/mach/arch.h>
20 #include <asm/mach/irq.h>
21 #include <mach/pxa3xx-regs.h>
22 #include "mfp-pxa300.h"
23 #include "colibri.h"
24 #include <linux/platform_data/mmc-pxamci.h>
25 #include <linux/platform_data/video-pxafb.h>
26 #include <linux/platform_data/mtd-nand-pxa3xx.h>
27
28 #include "generic.h"
29 #include "devices.h"
30
31 #if defined(CONFIG_AX88796)
32 #define ETHER_ADDR_LEN 6
33 static u8 ether_mac_addr[ETHER_ADDR_LEN];
34
35 void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
36 {
37         int i;
38         u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
39
40         /*
41          * If the bootloader passed in a serial boot tag, which contains a
42          * valid ethernet MAC, pass it to the interface. Toradex ships the
43          * modules with their own bootloader which provides a valid MAC
44          * this way.
45          */
46
47         for (i = 0; i < ETHER_ADDR_LEN; i++) {
48                 ether_mac_addr[i] = serial & 0xff;
49                 serial >>= 8;
50         }
51
52         if (is_valid_ether_addr(ether_mac_addr)) {
53                 plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
54                 plat_data->mac_addr = ether_mac_addr;
55                 printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
56                         __func__);
57         } else {
58                 plat_data->flags |= AXFLG_MAC_FROMDEV;
59                 printk(KERN_INFO "%s(): no valid serial boot tag found, "
60                         "taking MAC from device\n", __func__);
61         }
62 }
63 #endif
64
65 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
66 static int lcd_bl_pin;
67
68 /*
69  * LCD panel (Sharp LQ043T3DX02)
70  */
71 static void colibri_lcd_backlight(int on)
72 {
73         gpio_set_value(lcd_bl_pin, !!on);
74 }
75
76 static struct pxafb_mode_info sharp_lq43_mode = {
77         .pixclock       = 101936,
78         .xres           = 480,
79         .yres           = 272,
80         .bpp            = 32,
81         .depth          = 18,
82         .hsync_len      = 41,
83         .left_margin    = 2,
84         .right_margin   = 2,
85         .vsync_len      = 10,
86         .upper_margin   = 2,
87         .lower_margin   = 2,
88         .sync           = 0,
89         .cmap_greyscale = 0,
90 };
91
92 static struct pxafb_mach_info sharp_lq43_info = {
93         .modes          = &sharp_lq43_mode,
94         .num_modes      = 1,
95         .cmap_inverse   = 0,
96         .cmap_static    = 0,
97         .lcd_conn       = LCD_COLOR_TFT_18BPP,
98         .pxafb_backlight_power = colibri_lcd_backlight,
99 };
100
101 void __init colibri_pxa3xx_init_lcd(int bl_pin)
102 {
103         lcd_bl_pin = bl_pin;
104         gpio_request(bl_pin, "lcd backlight");
105         gpio_direction_output(bl_pin, 0);
106         pxa_set_fb_info(NULL, &sharp_lq43_info);
107 }
108 #endif
109
110 #if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
111 static struct mtd_partition colibri_nand_partitions[] = {
112         {
113                 .name        = "bootloader",
114                 .offset      = 0,
115                 .size        = SZ_512K,
116                 .mask_flags  = MTD_WRITEABLE, /* force read-only */
117         },
118         {
119                 .name        = "kernel",
120                 .offset      = MTDPART_OFS_APPEND,
121                 .size        = SZ_4M,
122                 .mask_flags  = MTD_WRITEABLE, /* force read-only */
123         },
124         {
125                 .name        = "reserved",
126                 .offset      = MTDPART_OFS_APPEND,
127                 .size        = SZ_1M,
128                 .mask_flags  = MTD_WRITEABLE, /* force read-only */
129         },
130         {
131                 .name        = "fs",
132                 .offset      = MTDPART_OFS_APPEND,
133                 .size        = MTDPART_SIZ_FULL,
134         },
135 };
136
137 static struct pxa3xx_nand_platform_data colibri_nand_info = {
138         .keep_config    = 1,
139         .parts          = colibri_nand_partitions,
140         .nr_parts       = ARRAY_SIZE(colibri_nand_partitions),
141 };
142
143 void __init colibri_pxa3xx_init_nand(void)
144 {
145         pxa3xx_set_nand_info(&colibri_nand_info);
146 }
147 #endif
148